Age | Commit message (Collapse) | Author |
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-next
Xu writes:
FPGA Manager changes for 6.16-rc1
- Peter hands over the maintain role of m10bmc-sec driver to Matthew.
- Qasim's change fix potential NULL pointer for fpga test.
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-6.16-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: fix potential null pointer deref in fpga_mgr_test_img_load_sgt()
fpga: m10bmc-sec: change contact for secure update driver
|
|
Renesas R-Car V4H (r8a779g0) has PCIe controller, and it requires
specific firmware downloading. So, add a document about the firmware
how to get.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[kwilczynski: commit log, refactor the document content and then add
this new file to a correct index under the top-level PCI documentation]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250507100947.608875-1-yoshihiro.shimoda.uh@renesas.com
|
|
The binding references in-kernel serial.yaml, so there is no need to
explicitly list its properties. Note that rts-gpio is also redundant
because DTS should be simply converted to -gpios variants.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250514125127.56149-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the Socionext Milbeaut UART binding to DT schema. It is a
straight-forward conversion.
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250507154924.1602842-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the Microchip PIC32 UART binding to DT schema. The binding was
unclear there are 3 interrupts. The functions were determined from the
driver. The 'cts-gpios' property is covered by serial.yaml schema.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250507154937.1603190-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the Arm SBSA UART binding to DT schema. It is a straight-forward
conversion.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20250506220016.2545637-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the Synopsys ARC UART binding to DT schema. Drop the "aliases"
portion which is not relevant to this schema.
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250507154909.1602497-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the Marvell Armada-3700 UART binding to DT schema. It is a
straight-forward conversion.
Drop the long deprecated single interrupt support.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250507154408.1595932-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the Lantiq SoC ASC UART binding to DT schema. There are no such
clock identifier defines nor a user with clocks, so drop the example
with clocks.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250506220029.2546179-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the Cirrus EP7209 UART binding to DT schema. There is no user of
"cirrus,ep7312-uart" other than the example, so drop it. Drop the
"aliases" node part as it is not relevant to the schema. The modem
control GPIOs are covered by the serial.yaml schema and don't have to be
listed in the schema.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250506220021.2545820-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the Arm MPS2 UART binding to DT schema. It is a straight-forward
conversion.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20250506220012.2545470-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the NXP LPC3220 HS UART binding to DT schema. It is a
straight-forward conversion.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://lore.kernel.org/r/20250506220048.2546915-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the Conexant Digicolor USART binding to DT schema. It is a
straight-forward conversion.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/20250506220025.2545995-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add SAMA7D65 USART compatible to DT bindings documentation.
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/ba19dff5c20bd022cf5391ac909a85ab5e1797b4.1746201835.git.Ryan.Wanner@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The TI USB8044 is similar to the USB8041.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250507131143.2243079-2-mike.looijmans@topic.nl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a dedicated compatible for USB controller found in this SoC
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Pritam Manohar Sutar <pritam.sutar@samsung.com>
Link: https://lore.kernel.org/r/20250516071333.3223226-2-pritam.sutar@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Appears to behave similarly to Parade PS8830. Found on some Qualcomm
Snapdragon X1 devices, such as Asus Zenbook A14.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Link: https://lore.kernel.org/r/20250512092745.249293-2-alex.vinarskis@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix misspelling reported by codespell
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250517175626.1363502-1-sumanth.gavini@yahoo.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Update the minimum version number to match both
Documentation/Changes and Documentation/conf.py.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250519220413.2914890-1-rdunlap@infradead.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v6.16 merge window
This includes following USB4/Thunderbolt changes for the v6.16 merge
window:
- Enable wake on connect and disconnect over system suspend.
- Add mapping between Type-C ports and USB4 ports on non-Chrome systems.
- Expose tunneling related events to userspace.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.16-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
Documentation/admin-guide: Document Thunderbolt/USB4 tunneling events
thunderbolt: Notify userspace about firmware CM tunneling events
thunderbolt: Notify userspace about software CM tunneling events
thunderbolt: Introduce domain event message handler
usb: typec: Connect Type-C port with associated USB4 port
thunderbolt: Add Thunderbolt/USB4 <-> USB3 match function
thunderbolt: Expose usb4_port_index() to other modules
thunderbolt: Fix a logic error in wake on connect
thunderbolt: Use wake on connect and disconnect over suspend
|
|
We have been using the Alabaster theme as the default theme since
Sept. 2022.
Keep the information on the RTD theme around in case someone wants to
try it with the DOCS_THEME environment variable.
Fixes: 26d797ffc1c0 ("docs: update sphinx.rst to reflect the default theme change")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250519223613.37277-1-rdunlap@infradead.org>
|
|
Fixes a typo in the description of the 23rd field of the scheduling
domain statistics, which was missing the word "cpu".
Fixes: 7c8cd569ff66 ("docs: Update Schedstat version to 17")
Signed-off-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250520100752.39921-1-vineethr@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next
intel-gpio for v6.16-1
* Split GPIO ACPI quirks to its own file
* Refactored GPIO ACPI library to shrink the code
The following is an automated git shortlog grouped by driver:
gpiolib:
- acpi: Update file references in the Documentation and MAINTAINERS
- acpi: Move quirks to a separate file
- acpi: Add acpi_gpio_need_run_edge_events_on_boot() getter
- acpi: Handle deferred list via new API
- acpi: Make sure we fill struct acpi_gpio_info
- acpi: Switch to use enum in acpi_gpio_in_ignore_list()
- acpi: Use temporary variable for struct acpi_gpio_info
- acpi: Deduplicate some code in __acpi_find_gpio()
- acpi: Reuse struct acpi_gpio_params in struct acpi_gpio_lookup
- acpi: Rename par to params for better readability
- acpi: Reduce memory footprint for struct acpi_gpio_params
- acpi: Remove index parameter from acpi_gpio_property_lookup()
- acpi: Improve struct acpi_gpio_info memory footprint
|
|
Get rid of logger.verbose() which is causing the logger to not
work.
Also, instead of having try/except everywhere, place them on a
common place.
While here, get rid of some bogus logs.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <a2cc32d5d519ed343158a915c39e8dc536a8ddb7.1747817887.git.mchehab+huawei@kernel.org>
|
|
The recent changes in the gpiolib-acpi.c need also updates in the Documentation
and MAINTAINERS. Do the necessary changes here.
Fixes: babb541af627 ("gpiolib: acpi: Move quirks to a separate file")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20250516193436.09bdf8cc@canb.auug.org.au
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Pick up build fixes from upstream to make this tree more testable.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Add a toggleable VM capability to reset the VCPU from userspace by
setting MP_STATE_INIT_RECEIVED through IOCTL.
Reset through a mp_state to avoid adding a new IOCTL.
Do not reset on a transition from STOPPED to RUNNABLE, because it's
better to avoid side effects that would complicate userspace adoption.
The MP_STATE_INIT_RECEIVED is not a permanent mp_state -- IOCTL resets
the VCPU while preserving the original mp_state -- because we wouldn't
gain much from having a new state it in the rest of KVM, but it's a very
non-standard use of the IOCTL.
Signed-off-by: Radim Krčmář <rkrcmar@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250515143723.2450630-5-rkrcmar@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Document the UFS Controller on the SM8750 Platform.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Signed-off-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250327-sm8750_ufs_master-v3-1-bad1f5398d0a@oss.qualcomm.com
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Allow to inherit valid properties from the dsi-controller. This fixes the
following warning when adding a panel property:
rzg2lc.dtb: dsi@10850000: '#address-cells', '#size-cells', 'panel@0' do not
match any of the regexes: 'pinctrl-[0-9]+'
from schema $id:
http://devicetree.org/schemas/display/bridge/renesas,dsi.yaml#
Also add a panel property to the example.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250520151112.3278569-1-hugo@hugovil.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add sgx,vz89te part number since it is similar to sgx,vz89x,
which is documented in trivial-devices.yaml.
Signed-off-by: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250515000225.79239-1-rodrigo.gobbi.7@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Signed-off-by: Shashank Balaji <shashank.mahadasyam@sony.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/nova into drm-next
Nova changes for v6.16
auxiliary:
- bus abstractions
- implementation for driver registration
- add sample driver
drm:
- implement __drm_dev_alloc()
- DRM core infrastructure Rust abstractions
- device, driver and registration
- DRM IOCTL
- DRM File
- GEM object
- IntoGEMObject rework
- generically implement AlwaysRefCounted through IntoGEMObject
- refactor unsound from_gem_obj() into as_ref()
- refactor into_gem_obj() into as_raw()
driver-core:
- merge topic/device-context-2025-04-17 from driver-core tree
- implement Devres::access()
- fix: doctest build under `!CONFIG_PCI`
- accessor for Device::parent()
- fix: conditionally expect `dead_code` for `parent()`
- impl TryFrom<&Device> bus devices (PCI, platform)
nova-core:
- remove completed Vec extentions from task list
- register auxiliary device for nova-drm
- derive useful traits for Chipset
- add missing GA100 chipset
- take &Device<Bound> in Gpu::new()
- infrastructure to generate register definitions
- fix register layout of NV_PMC_BOOT_0
- move Firmware into own (Rust) module
- fix: select AUXILIARY_BUS
nova-drm:
- initial driver skeleton (depends on drm and auxiliary bus
abstractions)
- fix: select AUXILIARY_BUS
Rust (dependencies):
- implement Opaque::zeroed()
- implement Revocable::try_access_with()
- implement Revocable::access()
From: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/aCxAf3RqQAXLDhAj@cassiopeiae
|
|
This adds a compatible string for the SPI controller on RK3528.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250520100102.1226725-2-amadeus@jmu.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add an initial documentation around atomic writes support in ext4.
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://patch.msgid.link/d3893b9f5ad70317abae72046e81e4c180af91bf.1747337952.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
capping feature.
To enable the power capping feature of the acpi_power_meter driver on
systems other than IBM products, you must explicitly specify
the force_cap_on module parameter.
Add information to the documentation about enabling the power capping
feature with this driver, including the above, to improve user convenience.
Signed-off-by: Shinji Nomoto <fj5851bi@fujitsu.com>
Link: https://lore.kernel.org/r/20250520062707.1657667-1-fj5851bi@fujitsu.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add new compatible for Bananapi R4 with 2.5G phy.
Base board is compatible with existing BPI-R4 only 1 SFP is replaced
by RJ45 port and use mt7988 internal phy.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250422132438.15735-2-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Merge series from Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>:
This patchset adds support for sound card on Qualcomm QCS9100 and
QCS9075 boards.
|
|
Fix misspelling reported by codespell
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Add "smartfiber" vendor prefix for manufactorer of EcoNet based boards.
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Document the top-level device tree binding for EcoNet MIPS-based SoCs.
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Document I2C controllers integrated in RK3528, which are compatible with
the RK3399 variant.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250417120118.17610-4-ziyao@disroot.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Document support for the I2C Bus Interface (RIIC) found on the Renesas
RZ/V2N (R9A09G056) SoC. The RIIC IP is identical to that on RZ/V2H(P),
so `renesas,riic-r9a09g057` will be used as a fallback compatible,
enabling reuse of the existing driver without changes.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250501203310.140137-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Add compatible string for Sophgo SG2044 SoC I2C controller which can be
used specifically for the SG2044 SoC.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250413223507.46480-9-inochiama@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Each vendor have an items entry of its own compatible, It is needless
and some can be merged as it share the same base "snps,designware-i2c"
compatible.
Merge the duplicate compatible entry into one item entry.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250413223507.46480-2-inochiama@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Add support for the MediaTek Dimensity 1200 (MT6893) SoC; this
chip's multiple I2C controller instances are fully compatible
with the ones found in the MT8192 SoC.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250416120303.148017-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The documentation on testing static functions using the KUnit macros
VISIBLE_IF_KUNIT and EXPORT_SYMBOL_IF_KUNIT is lacking clarity and
missing key steps in the example. This has caused bugs and confusion
among developers.
Improve wording of description and add missing steps to the example.
This entails adding the "#include <kunit/visibility.h>" line and the
"MODULE_IMPORT_NS(EXPORTED_FOR_KUNIT_TESTING);" line. Both of which were
missing from the original example and key to exposing static functions.
Link: https://lore.kernel.org/r/20250516190631.1214081-1-rmoar@google.com
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Merge updates of multiple thermal drivers for 6.16 from Daniel Lezcano:
"- Make the Hisilicon driver to compile by default when ARCH_HISI is
set (Krzysztof Kozlowski)
- Cleanup printk format with use of %pC instead of %pCn in the bcm2835
driver (Luca Ceresoli)
- Fix variable naming coding style in the AmLogic driver (Enrique
Isidoro Vazquez Ramos)
- Fix missing debugfs entry removal on failure by using the devm_
variant in the LVTS driver (AngeloGioacchino Del Regno)
- Remove the unused lvts_debugfs_exit() function as the devm variant
introduced before takes care of removing the debugfs entry in the
LVTS driver (Arnd Bergmann)
- Add the Airoha EN7581 thermal sensor support along with its DT
bindings (Christian Marangi)
- Add ipq5018 compatible string DT binding, cleanup and add its suppot
in the QCom Tsens driver driver (Sricharan Ramabadhran and George
Moussalem)
- Fix comments typos in the Airoha driver (Christian Marangi)"
* tag 'thermal-v6.16-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/airoha: Fix spelling mistake
thermal/drivers/qcom/tsens: Add support for IPQ5018 tsens
thermal/drivers/qcom/tsens: Add support for tsens v1 without RPM
thermal/drivers/qcom/tsens: Update conditions to strictly evaluate for IP v2+
dt-bindings: thermal: qcom-tsens: Add ipq5018 compatible
thermal/drivers: Add support for Airoha EN7581 thermal sensor
dt-bindings: thermal: Add support for Airoha EN7581 thermal sensor
thermal/drivers/mediatek/lvts: Remove unused lvts_debugfs_exit
thermal/drivers/mediatek/lvts: Fix debugfs unregister on failure
thermal/drivers/amlogic: Rename Uptat to uptat to follow kernel coding style
vsprintf: remove redundant and unused %pCn format specifier
thermal/drivers/bcm2835: Use %pC instead of %pCn
thermal/drivers/hisi: Do not enable by default during compile testing
|
|
Merge an update of the Intel int340x thermal driver adding Platform
Temperature Control (PTC) support to it (Srinivas Pandruvada).
* thermal-intel:
thermal: int340x: processor_thermal: Platform temperature control documentation
thermal: intel: int340x: Enable platform temperature control
thermal: intel: int340x: Add platform temperature control interface
|
|
Add support for KVM_CAP_X86_BUS_LOCK_EXIT on SVM CPUs with Bus Lock
Threshold, which is close enough to VMX's Bus Lock Detection VM-Exit to
allow reusing KVM_CAP_X86_BUS_LOCK_EXIT.
The biggest difference between the two features is that Threshold is
fault-like, whereas Detection is trap-like. To allow the guest to make
forward progress, Threshold provides a per-VMCB counter which is
decremented every time a bus lock occurs, and a VM-Exit is triggered if
and only if the counter is '0'.
To provide Detection-like semantics, initialize the counter to '0', i.e.
exit on every bus lock, and when re-executing the guilty instruction, set
the counter to '1' to effectively step past the instruction.
Note, in the unlikely scenario that re-executing the instruction doesn't
trigger a bus lock, e.g. because the guest has changed memory types or
patched the guilty instruction, the bus lock counter will be left at '1',
i.e. the guest will be able to do a bus lock on a different instruction.
In a perfect world, KVM would ensure the counter is '0' if the guest has
made forward progress, e.g. if RIP has changed. But trying to close that
hole would incur non-trivial complexity, for marginal benefit; the intent
of KVM_CAP_X86_BUS_LOCK_EXIT is to allow userspace rate-limit bus locks,
not to allow for precise detection of problematic guest code. And, it's
simply not feasible to fully close the hole, e.g. if an interrupt arrives
before the original instruction can re-execute, the guest could step past
a different bus lock.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Manali Shukla <manali.shukla@amd.com>
Link: https://lore.kernel.org/r/20250502050346.14274-5-manali.shukla@amd.com
[sean: fix typo in comment]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Introduce 'firmware-name' property to allow end-users and/or integrators
to decide which usecase-specific firmware to run on the WCN7850 platform.
This is necessary due to resource limitations such as memory capacity and
CPU capability, or performance and power optimization for different
application scenarios.
Two firmwares are supported: 'WCN7850/hw2.0' and 'WCN7850/hw2.0/ncm825'.
The former is the default firmware, suitable for most WiFi 7 STA
functions. The latter adds support for commercial-quality SAP and
optimizes power consumption for IoT applications.
Signed-off-by: Miaoqing Pan <quic_miaoqing@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250424005703.2479907-2-quic_miaoqing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|