| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.16 (take two)
- Add CANFD support for the RZ/G3E SoC and the RZ/G3E SMARC Carrier-II
EVK development board,
- Add support for Ethernet port A, 9-pin D-sub serial, and USB on the
RZN1D-DB and RZN1D-EB development and expansion boards,
- Add sound support for the Retronix Sparrow Hawk board,
- Add General PWM Timer (GPT) support for the RZ/G2L and RZ/V2L SoCs
and SMARC EVK boards,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.16-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: dts: renesas: r9a06g032-rzn1d400-eb: Enable USB host port
ARM: dts: renesas: r9a06g032-rzn1d400-db: Add pinmux for the CPLD
arm64: dts: renesas: white-hawk-single: Improve Ethernet TSN description
ARM: dts: renesas: r9a06g032-rzn1d400-db: Enable USB device port
ARM: dts: renesas: r9a06g032-rzn1d400-eb: Describe 9-pin D-sub serial port
arm64: dts: renesas: beacon-renesom: Align wifi node name with bindings
arm64: dts: renesas: rzg2l-smarc: Enable GPT on carrier board
arm64: dts: renesas: r9a07g054: Add GPT support
arm64: dts: renesas: r9a07g044: Add GPT support
arm64: dts: renesas: sparrow-hawk: Add MSIOF Sound support
ARM: dts: renesas: r9a06g032-rzn1d400-eb: Add GMAC1 port
arm64: dts: renesas: r9a09g047e57-smarc: Enable CAN Transceiver
arm64: dts: renesas: r9a09g047e57-smarc: Enable CANFD
arm64: dts: renesas: r9a09g047: Add CANFD node
Link: https://lore.kernel.org/r/cover.1746798755.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.16
- Add SDHI, ICU, I2C, PMIC, and GPU support on the RZ/G3E SoC and the
RZ/G3E SoM and SMARC Carrier-II EVK development board,
- Add internal SDHI regulator support on the RZ/V2H(P) SoC,
- Add UFS tuning parameters in E-FUSE on the R-Car S4-8 ES1.2 SoC,
- Add support for Ethernet ports C and D, I2C, keys, and SDHI on the
RZ/N1D SoC and the RZN1D-DB and RZN1D-EB development and expansion
boards,
- Add initial support for the RZ/V2N (R9A09G056) and the RZ/V2N EVK
board,
- Add support for the Retronix Sparrow Hawk board, which is based on
R-Car V4H ES3.0,
- Add ISP core support on R-Car V3U, V4H, and V4M,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.16-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (29 commits)
arm64: dts: renesas: r8a779h0: Add ISP core function block
arm64: dts: renesas: r8a779g0: Add ISP core function block
arm64: dts: renesas: r8a779a0: Add ISP core function block
arm64: dts: renesas: r8a779g3: Add Retronix R-Car V4H Sparrow Hawk board support
arm64: dts: renesas: rzg3e-smarc-som: Enable Mali-G52
arm64: dts: renesas: r9a09g047: Add Mali-G52 GPU node
arm64: dts: renesas: rzg3e-smarc-som: Add RAA215300 pmic support
arm64: dts: renesas: rzg3e-smarc-som: Add I2C2 device pincontrol
ARM: dts: renesas: r9a06g032-rzn1d400-eb: describe SD card port
ARM: dts: renesas: r9a06g032: Describe SDHCI controllers
arm64: dts: renesas: Add initial device tree for RZ/V2N EVK
arm64: dts: renesas: Add initial SoC DTSI for RZ/V2N
dt-bindings: pinctrl: renesas: Document RZ/V2N SoC
dt-bindings: clock: renesas: Document RZ/V2N SoC CPG
dt-bindings: soc: renesas: Document SYS for RZ/V2N SoC
dt-bindings: soc: renesas: Document Renesas RZ/V2N SoC variants and EVK
ARM: dts: renesas: r9a06g032-rzn1d400-db: Describe keys
ARM: dts: renesas: r9a06g032-rzn1d400-eb: Describe I2C bus
ARM: dts: renesas: r9a06g032-rzn1d400-db: Describe I2C bus
ARM: dts: renesas: r9a06g032: Describe I2C controllers
...
Link: https://lore.kernel.org/r/cover.1745582596.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt
SoCFPGA DTS updates for v6.15
- Updates to dt-bindings
- Document Agilex5 NAND daughter board
- Convert Stratix10 FPGA Manager to json-schema
- Convert Stratix10 Service Layer to json-schema
- Add document for Terasic's DE10-nano board
- Add support for Agilex5 NAND daughter board
- Add basic support for Terasic's DE10-nano board
* tag 'socfpga_dts_updates_for_v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: socfpga: agilex: Add dma channel id for spi
arm64: dts: socfpga: agilex5: add led and memory nodes
arm64: dts: intel: socfpga_agilex: add frequencies to internal oscillators
ARM: dts: socfpga: Add basic support for Terrasic's de10-nano
dt-bindings: altera: Add compatible for Terasic's DE10-nano
arm64: dts: socfpga: agilex5: add qspi flash node
dt-bindings: firmware: stratix10: Convert to json-schema
dt-bindings: fpga: stratix10: Convert to json-schema
arm64: dts: socfpga: agilex5: fix gpio0 address
arm64: dts: socfpga: agilex5: add NAND daughter board
dt-bindings: intel: document Agilex5 NAND daughter board
Link: https://lore.kernel.org/r/20250326121152.1739873-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
They should be named "usb@".
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250330193833.21970-12-wsa+renesas@sang-engineering.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
They should be named "usb@".
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250330193833.21970-11-wsa+renesas@sang-engineering.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
They should be named "usb@".
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250330193833.21970-10-wsa+renesas@sang-engineering.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
They should be named "usb@".
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250330193833.21970-9-wsa+renesas@sang-engineering.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
They should be named "usb@".
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250330193833.21970-8-wsa+renesas@sang-engineering.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/fixes
Amlogic Fixes for v6.15:
- fix reference to unknown/untested PWM clock on ARM/ARM64 boards
- fix missing clkc_audio node on dreambox ARM64 DT
* tag 'amlogic-fixes-for-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
arm64: dts: amlogic: dreambox: fix missing clkc_audio node
arm64: dts: amlogic: g12: fix reference to unknown/untested PWM clock
arm64: dts: amlogic: gx: fix reference to unknown/untested PWM clock
ARM: dts: amlogic: meson8b: fix reference to unknown/untested PWM clock
ARM: dts: amlogic: meson8: fix reference to unknown/untested PWM clock
Link: https://lore.kernel.org/r/e9c520a1-b986-49e1-b9b1-67511c187716@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The fernsehfee3 board uses a Ricoh RN5T618 PMIC to generate various
voltages. Board schematics are not available, but the regulator voltages
found in /sys/kernel/debug/regulator/regulator_summary match those in
meson8m2-mxiii-plus.dts:
DCDC1 0 0 0 unknown 1100mV 0mA 0mV 0mV
DCDC2 0 0 0 unknown 1150mV 0mA 0mV 0mV
DCDC3 0 0 0 unknown 1500mV 0mA 0mV 0mV
LDO1 0 0 0 unknown 2900mV 0mA 0mV 0mV
LDO2 0 0 0 unknown 1800mV 0mA 0mV 0mV
LDO3 0 0 0 unknown 1800mV 0mA 0mV 0mV
LDO4 0 0 0 unknown 2850mV 0mA 0mV 0mV
LDO5 0 0 0 unknown 1800mV 0mA 0mV 0mV
LDORTC1 0 0 0 unknown 2700mV 0mA 0mV 0mV
LDORTC2 0 0 0 unknown 900mV 0mA 0mV 0mV
This patch takes the following approach:
- Copy RN5T618 regulator nodes from meson8m2-mxiii-plus.dts
- Remove some of the regulator names, which do not seem to apply
- Verify regulator supply relations by starting without any relations
(and without regulator-always-on) and seeing what breaks when the
kernel turns off "unused" regulators.
This results in the following observations:
- When LDO1 is turned off, the board resets
- When DCDC1, DCDC2, DCDC3, LDO2, or LDO5 are turned off, the board (as
observed through the serial port) stops running, so these must stay on
at all times.
- LDO4 (VCC2V8) appears to be unused on this board.
- LDO3 (VCC1V8_USB) must stay on in order for USB to work, both the
external USB ports and the internal USB wifi module.
The cpu-supply and mali-supply relations are also copied from
meson8m2-mxiii-plus.dts
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20250428-fernsehfee-v2-4-293b98a43a91@posteo.net
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Fernsehfee[1] ("TV fairy") 3.0 is a set-top box with HDMI input and
output ports. It originally ran Android 4.4 and a Linux 3.10 kernel.
The following features are tested and known to work:
- Ethernet
- Power LED (switching between green and red)
- Power button
- eMMC
- SD Card
- USB
- Wifi
The following features are untested or not working:
- HDMI input and output
- Infrared remote control input and output
[1]: https://fernsehfee.de/ (German), https://telefairy.com/ (English)
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20250428-fernsehfee-v2-3-293b98a43a91@posteo.net
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Convert mx2{3,8} dts files to use the padconfig macros defined in
mxs-pinfunc.h.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Update accepted voltage levels according to IMX7DCEC Table 9 Operating ranges
Signed-off-by: Efe Can İçöz <efecanicoz@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Since commit 3c3606793f7e ("dt-bindings: wireless: bcm4329-fmac: Use
wireless-controller.yaml schema"), bindings expect 'wifi' as node name:
imx7d-remarkable2.dtb: bcrmf@1: $nodename:0: 'bcrmf@1' does not match '^wifi(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The compatible "plx,pex8605" does not exist, there is no DT binding for
it and there was never a driver matching this compatible, remove it.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20250410063919.11199-1-francesco@dolcini.it
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add device-tree for ASUS Transformer Pad LTE TF300TL, which is NVIDIA
Tegra30-based tablet device.
Co-developed-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250503102950.32744-4-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
binding
Rename the apbdma nodename from "dma@" to "dma-controller@" to align with
linux common dma-controller binding.
Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20250507-nvidea-dma-v4-1-6161a8de376f@gmail.com
[treding@nvidia.com: adjust subject prefix for consistency]
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Can be used via the USB connector J20.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250508074311.20343-6-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The CPLD has no dedicated driver, so apply the pinmux settings with the
pinmux driver instead.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250508074311.20343-5-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Can be used via the microUSB connector CN9.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250425100129.11942-5-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
A simple CTS/RTS capable UART on a good old D-sub connector.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250424102805.22803-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
This port bypasses the switch and is directly connected to the GMAC.
Co-developed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250414100206.7185-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
On am335x evm[1], UART0(UART1-HW) has a wakeup capability.
Set wakeup-source, which will be used in the omap serial driver to enable
the device wakeup capability.
[1] https://www.ti.com/tool/TMDXEVM3358
[2] AM335x TRM - https://www.ti.com/lit/ug/spruh73q/spruh73q.pdf
Signed-off-by: Sukrut Bellary <sbellary@baylibre.com>
Tested-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20250318230042.3138542-4-sbellary@baylibre.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
The "clock-latency" property is part of the deprecated opp-v1 binding
and is redundant if the opp-v2 table has equal or larger values in any
"clock-latency-ns". The OPP table has values of 256000, so it can be
removed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250410-dt-cpu-schema-v2-9-63d7dc9ddd0a@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add missing "#sound-dai-cells" which is required by the linux,bt-sco
binding.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250409205001.1522009-1-robh@kernel.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The Raspberry Pi 2 (2nd rev) has the BCM2837 SoC instead of the
BCM2836. Except of this the configuration of the board is same
as the predecessor (no WLAN, no BT).
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20250418143307.59235-3-wahrenst@gmx.net
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
The rk3066 contains a Mali400 GPU, so enable it.
There is no individual (or even controllable) supply for the GPU
on the board.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250503201043.990933-3-heiko@sntech.de
|
|
The marsboard does have a regular hdmi-a connector and can simply
use the already existing infrastructure (rk3066-hdmi) for display
output.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250503201043.990933-2-heiko@sntech.de
|
|
This reverts commit 1580ccb6ed9dc76b8ff3e2d8912e8215c8b0fa6d.
The HSYNC/VSYNC polarity of rk3036 HDMI are controlled by GRF.
Without the polarity configuration in GRF, it can be observed from
the HDMI protocol analyzer that the H/V front/back timing output
by RK3036 HDMI are currently not in line with the specifications.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3036-kylin
Link: https://lore.kernel.org/r/20250422070455.432666-7-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The RK3036 HDMI DDC bus requires it's PHY's reference clock to be
enabled first before normal DDC communication can be carried out.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3036-kylin
Link: https://lore.kernel.org/r/20250422070455.432666-6-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Bluetooth is available on the other Panda board versions, too, so move
stuff to common and specify the needed clock properly.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20250427052735.88133-3-andreas@kemnade.info
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
The Pandaboard needs a 32k clock in the TWL6030 to be enabled
for Wifi to work.
With some luck, it is enabled by some U-Boot fork.
Do not rely on it and properly specify the requirement.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20250427052735.88133-2-andreas@kemnade.info
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Since commit 3c3606793f7e ("dt-bindings: wireless: bcm4329-fmac: Use
wireless-controller.yaml schema"), bindings expect 'wifi' as node name:
sun8i-h3-nanopi-neo-air.dtb: bcrmf@1: $nodename:0: 'bcrmf@1' does not match '^wifi(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250424084737.105215-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The preferred node name for cooling map nodes is a 'map' prefix. Use
'map0' like most other platforms.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250409203613.1506047-1-robh@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The "clock-latency" property is part of the deprecated opp-v1 binding
and is redundant if the opp-v2 table has equal or larger values in any
"clock-latency-ns". Add any missing "clock-latency-ns" properties and
remove "clock-latency".
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250410-dt-cpu-schema-v2-10-63d7dc9ddd0a@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The compatible "plx,pex8605" does not exist, there is no DT binding for
it and there was never a driver matching this compatible, remove it.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The card name for ALSA is generated from the model name string and
is limited to 16 characters. Use a shorter name to prevent cutting the
name.
MBLS1021A uses the same audio codec as most i.MX based starter kits
by TQ-Systems. Adjust the sound card model to i.MX based platforms,
as done by commit e6303798b6ac4 ("arm64: dts: imx8mp-tqma8mpql-mba8mpxl:
change sound card model name"). This allows sharing a default asound.conf
in BSP over all the kits.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This adds an overlay for the supported RGB display CDTech DC44.
DCU graphics chain is configured accordingly.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This adds an overlay for the supported RGB display CDTech FC21.
DCU graphics chain is configured accordingly.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This adds an overlay for the supported LVDS display tianma tm070jvhg33.
The on-board RGB-to-LVDS encoder and DCU graphics chain are configured
accordingly. Add power supply as well, which had been missing all the time.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This add an overlay for using the RGB-to-HDMI bridge.
Note: As DDC is directly connected to general I2C bus, there might be I2C
address conflicts. Hence not all displays might work.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
(Q)SPI NOR flash is supplied by 3.3V. Add the corresponding supply.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
With commit 784bdc6f2697c ("ARM: dts: ls1021a: change to use SPDX
identifiers") the SoC .dtsi specifies the license using SPDX tags.
Fix license according to the ls1021a.dtsi this platform DT files
are based on.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The "clock-latency" property is part of the deprecated opp-v1 binding
and is redundant if the opp-v2 table has equal or larger values in any
"clock-latency-ns". The OPP tables have values of 150000, so it can be
removed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Some boards have noise on the UART RX line when the UART pins are not
connected to another device (such as an USB UART adapter). This can
be addressed by using a pull up resistor. Not all boards may provide
such a pull up resistor on the PCB so enable the SoC's pull-up on the
UART RX and TX pads by default. This matches the default (from u-boot
or SoC hardware) state for the pinmux configuration on these pads.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250329185855.854186-3-martin.blumenstingl@googlemail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Some boards have noise on the UART RX line when the UART pins are not
connected to another device (such as an USB UART adapter). This can
be addressed by using a pull up resistor. Not all boards may provide
such a pull up resistor on the PCB so enable the SoC's pull-up on the
UART RX and TX pads by default. This matches the default (from u-boot
or SoC hardware) state for the pinmux configuration on these pads.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250329185855.854186-2-martin.blumenstingl@googlemail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Device-tree expects absent clocks to be specified as <0> (instead of
using <>). This fixes using the FCLK4/FCLK3 clocks as they are now
seen at their correct index (while before they were recognized, but at
the correct index - resulting in the hardware using a different clock
than what the kernel sees).
Fixes: dbf921861985 ("ARM: dts: amlogic: meson8b: switch to the new PWM controller binding")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250420164801.330505-3-martin.blumenstingl@googlemail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Device-tree expects absent clocks to be specified as <0> (instead of
using <>). This fixes using the FCLK4/FCLK3 clocks as they are now
seen at their correct index (while before they were recognized, but at
the correct index - resulting in the hardware using a different clock
than what the kernel sees).
Fixes: 802cff460aab ("ARM: dts: amlogic: meson8: switch to the new PWM controller binding")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250420164801.330505-2-martin.blumenstingl@googlemail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
The "fsl,mma7455l" compatible string is not documented anywhere.
MMA7455L is the exact same device as the MMA7455, with the exception that
it is lead-free. Use the documented compatible string.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings expect NAND controller device nodes to be named
"nand-controller".
Cc: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
