| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup
* 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Fix build error after merge
|
|
Commit 9890ce44 (ARM: get rid of asm/irq.h in asm/prom.h)
removed include of asm/irq.h in asm/prom.h. This commit
together with recent omap cleanup to remove io.h causes
build breakage:
arrch/arm/mach-omap2/control.c: In function 'omap3_ctrl_write_boot_mode':
arch/arm/mach-omap2/control.c:238: error:
'OMAP343X_CTRL_BASE' undeclared (first use in this function)
...
Fix this by including hardware.h directly where needed
instead of relying on asm/irq.h in asm/prom.h.
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Now that many platforms don't need mach/io.h, remove the unused ones.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
|
|
commit e4b0b2cbbb (ARM: OMAP2+: gpmc-smsc911x: add required smsc911x
regulators) added regulators which are registered during
gpmc_smsc911x_init(). However, some platforms (OMAP3/Overo) have more
than one instance of the SMSC911x and result in attempting to register
the same regulator more than once which causes a panic().
Fix this by only registering the regulator when the platform_data id
field is zero, indicating its the first instance.
Cc: Matt Porter <mporter@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
When using the SMPS regulators to scale voltages, the regulator
framework may pass a minimum voltage that is not an exact OPP voltage.
For the VC/VP controlled voltage domains, we must ensure that the
voltage requested is the exact voltage from the OPP table. This is
especially critical when using SR.
To fix, voltdm_scale() uses the target voltage passed to walk through
the OPP voltages until it finds a voltage that is >= one of the OPP
voltages.
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
|
|
VDD1 is used for MPU voltage, VDD2 is for IVA and VDD3 is for CORE.
These are needed by DVFS. This patch also adds external controller
support for these regulators, the default I2C control channel can't
be used to modify the voltages for these regulators on TWL6030.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
|
|
VDD1 and VDD2 now use voltage processor for controlling the regulators.
This is done by passing additional voltdm data during the regulator init.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
|
|
VDD1 and VDD2 are the core voltage regulators on OMAP3. VDD1 is used
to control MPU/IVA voltage, and VDD2 is used for CORE. These regulators
are needed by DVFS.
Voltage ranges for VDD1 and VDD2 are taken from twl4030/twl5030 data manuals:
- SWCS019L : TWL4030 ES3.1 Data Manual rev L
- SWCS030E : TWL5030 ES1.2 Data Manual rev E
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
|
|
OMAP3 uses the default settings for VDD1 channel, otherwise the settings will
overlap with VDD2 and attempting to modify VDD1 voltage will actually change
VDD2 voltage.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
|
|
commit 2f34ce81b8c05c900e45bd88595cc154f7bb5957
(OMAP3: PM: Adding voltage driver support.)
introduced runtime computation of waittime to handle all potential
sys clocks available.
In the voltage processor, the SPMSUpdateWait is calculated based on
the slew rate and the voltage step (SMPSUpdateWait = slew rate *
Voltage Step). After the voltage processor receives the SMPS_Ack
signal, the Voltage Controller will wait for SMPSUpdateWait clock
cycles for the voltage to settle to the new value. For all
practical purposes, the waittime parameter is the OMAP hardware
translation of what the slew rate on the PMIC is.
As an example, with TPS62361 on OMAP4460,
step_size = 10000
slew_rate = 32000
sys_clk_rate = 38400
Our current computation results in the following:
= ((step_size / slew_rate) * sys_clk_rate) / 1000
= ((10000 / 32000) * 38400 / 1000
= 0
Fix the same using DIV_ROUND_UP as an extra wait clock cycle
is better than lesser clock cycle. For the above example, this
translates to:
= (10000 * 38400) / (1000 * 32000)
= 12
Acked-by: Jon Hunter <jon-hunter@ti.com>
[nm@ti.com: slightly better implementation]
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Yuan Jiangli <jlyuan@motorola.com>
Acked-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
When CONFIG_HOTPLUG_CPU=n, there are unused functions in wakeupgen:
arch/arm/mach-omap2/omap-wakeupgen.c:181: warning: 'wakeupgen_irqmask_all' defined but not used
Fix this by moving all the functions only used when CONFIG_HOTPLUG_CPU=y
together and wrapping in an #ifdef.
No functional changes.
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Fix the below warning by making omap2_init_processor_devices() __init.
It is called by an __init function and calls only __init functions, so
it should also be init.
WARNING: arch/arm/mach-omap2/built-in.o(.text+0x183c): Section mismatch in reference from the function omap2_init_processor_devices() to the function .init.text:_init_omap_device()
The function omap2_init_processor_devices() references
the function __init _init_omap_device().
This is often because omap2_init_processor_devices lacks a __init
annotation or the annotation of _init_omap_device is wrong.
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Otherwise we get:
arch/arm/mach-omap2/board-n8x0.c:39:12: warning:
'slot1_cover_open' defined but not used [-Wunused-variable]
arch/arm/mach-omap2/board-n8x0.c:40:12: warning:
'slot2_cover_open' defined but not used [-Wunused-variable]
arch/arm/mach-omap2/board-n8x0.c:41:23: warning:
'mmc_device' defined but not used [-Wunused-variable]
Reported-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Otherwise we get the following warning:
arch/arm/mach-omap2/io.c:53:24: warning:
'omap24xx_io_desc' defined but not used [-Wunused-variable]
Reported-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Merge v3.3-rc6 to get the latest DSS and OMAP arch fixes.
Conflicts:
arch/arm/mach-omap1/board-innovator.c
drivers/video/omap2/dss/apply.c
|
|
arch/arm/mach-omap2/: included some headers tiwce:
- arch/arm/mach-omap2/board-ldp.c: 'linux/gpio.h'
- arch/arm/mach-omap2/io.c: 'common.h'
- arch/arm/mach-omap2/omap_hwmod_44xx_data.c: 'plat/i2c.h'
Remove the duplicates.
Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Cleanup: don't build mach-omap2/hwspinlock.c if the OMAP hwspinlock
driver isn't configured.
This will both shorten build time and avoid registering a device
which isn't needed.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
If platform data is provided by the caller gpio_pendown is put into
unused static ads7846_config structure and effectively has no effect.
Of course caller can set gpio_pendown field in platform data himself
but it seems natural to do this in ads7846_init to remove duplication.
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
It turned out wrong OMAP HSUSB port was configured on pandora,
but still managed to work somehow. This was noticed after enabling
in-kernel mux, where USB muxing was causing other devices not to work,
because hsusb1 pins (instead of hsusb2) were wrongly remuxed, which
are used for other things on pandora.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Determine SoC type, i.e. whether GP or HS
Note: cpu_is_34xx() is true for am33xx also. Doing
cpu_is_am33xx() check after cpu_is_34xx() will not
achieve what we want due to the above reason.
Hence cpu_is_am33xx() is done before cpu_is_34xx()
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
To be able to compile kernel/drivers/mtd/nand/omap2.ko as module, that
two symbols need to be exported. Otherwise, I get following error
message
ERROR: "gpmc_calculate_ecc" [drivers/mtd/nand/omap2.ko] undefined!
ERROR: "gpmc_enable_hwecc" [drivers/mtd/nand/omap2.ko] undefined!
Signed-off-by: Bernhard Walle <walle@corscience.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
SOC_OMAP_NOOP"
This reverts commit c295fb633e321a7df3b8846c4eaddc5da3e0aaed.
This makes existing .config files bloated by selecting in all
omaps as noted by Russell King - ARM Linux <linux@arm.linux.org.uk>.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The platform_suspend_ops can be shared across OMAP2, 3, and 4, along
with all of the functions referenced in that structure. This patch
shares them. It also removes the suspend_state file-scoped variable
in the OMAP2 and 3 PM code; it does not appear to be actually needed
by anything.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
[khilman@ti.com: minor rework needed due to rebase/merge with conflicting changes]
Signed-off-by: Kevin Hilman <khilman@ti.com>
|
|
Check the return code pointer value from debugfs_create_dir for error
or NULL.
Also added an additional check to prevent the creation of a 'suspend'
entry at the debugfs root in case a power domain directory cannot be
created.
Signed-off-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
|
|
clkdms_setup() is identical across OMAP2, 3, and 4, so share it.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Tested-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
|
|
Clean up a few different parts of omap_set_pwrdm_state():
- Remove a superfluous call to pwrdm_state_switch(). Not needed
unless LOWPOWERSTATECHANGE is used, because the state switch code is
called by either clkdm_sleep() or clkdm_allow_idle().
- Add code to wait for the power state transition in the OMAP4+ low
power state change. This is speculative, so I would particularly
appreciate feedback on this part.
- Remove a superfluous call to pwrdm_read_pwrst().
- Update variable names to be more meaningful (hopefully) and precise.
- Fix an error path bug that would not place the clockdomain back into
hardware-supervised idle or sleep mode if the power state could not
be programmed.
The documentation for this function still needs major improvements;
that's left for a later patch.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Tested-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
|
|
Remove some superfluous calls to pwrdm_clear_all_prev_pwrst().
pwrdm_pre_transition(), which appears a few lines after these calls,
invokes pwrdm_clear_all_prev_pwrst() on each powerdomain -- there's no
need to do it twice.
N.B.: some of us have observed that accesses to the previous
powerstate registers seem to be quite slow. Although the writes
removed by this patch should be buffered by the write buffer, there is
a read to a PRM register immediately afterwards. That will block the
OMAP3 MPU until all of those writes complete. So this patch should
result in a minor performance improvement during idle entry.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Tero Kristo <t-kristo@ti.com>
[khilman@ti.com: removed a couple more for OMAP4]
Tested-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
|
|
|
|
While building modules with randconfig the below errors are observed.
ERROR: "omap_bus_sync" [drivers/watchdog/sp805_wdt.ko] undefined!
ERROR: "omap_bus_sync" [drivers/watchdog/dw_wdt.ko] undefined!
ERROR: "omap_bus_sync" [drivers/virtio/virtio_ring.ko] undefined!
ERROR: "omap_bus_sync" [drivers/video/sm501fb.ko] undefined!
ERROR: "omap_bus_sync" [drivers/usb/mon/usbmon.ko] undefined!
ERROR: "omap_bus_sync" [drivers/usb/host/sl811-hcd.ko] undefined!
ERROR: "omap_bus_sync" [drivers/usb/host/ohci-hcd.ko] undefined!
ERROR: "omap_bus_sync" [drivers/usb/host/isp1760.ko] undefined!
ERROR: "omap_bus_sync" [drivers/usb/host/isp1362-hcd.ko] undefined!
ERROR: "omap_bus_sync" [drivers/usb/host/isp116x-hcd.ko] undefined!
ERROR: "omap_bus_sync" [drivers/usb/core/usbcore.ko] undefined!
ERROR: "omap_bus_sync" [drivers/tty/serial/altera_uart.ko] undefined!
ERROR: "omap_bus_sync" [drivers/tty/serial/altera_jtaguart.ko] undefined!
ERROR: "omap_bus_sync" [drivers/tty/serial/8250/8250_dw.ko] undefined!
ERROR: "omap_bus_sync" [drivers/ssb/ssb.ko] undefined!
ERROR: "omap_bus_sync" [drivers/rtc/rtc-cmos.ko] undefined!
ERROR: "omap_bus_sync" [drivers/rtc/rtc-bq4802.ko] undefined!
ERROR: "omap_bus_sync" [drivers/mtd/nand/tmio_nand.ko] undefined!
ERROR: "omap_bus_sync" [drivers/mtd/nand/omap2.ko] undefined!
Signed-off-by: R Sricharan <r.sricharan@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We need just one ifdef for each ARCH_OMAP2/3/4.
Also remove the comment about i2c & twl driver as it's
pretty obvious that we still need some platform data
until drivers are converted to device tree.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Otherwise we'll get undefined reference to `gic_of_init' or
undefined reference to `omap_intc_of_init'.
This was caused by commit fbf75da733e82bb17a01e1b907b0e40d9c028823
(ARM: OMAP2+: board-generic: Use of_irq_init API).
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Fix the code to correctly use IS_ERR and PTR_ERR on the return
values pointers
Reported-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
|
|
The debugfs_create_* API returns a return code or NULL
in the return ptr in case of problem.
Fix the smartreflex code to take this into account.
Signed-off-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
|
|
val && (val != 1) == val > 1
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
|
|
There are no functional changes here, only misc cleanups in general:
- re-organize variable declarations,
- converting if {} else if {} else {} into switch statements,
- correct comments typos,
- add/remove white lines to improve readability,
- etc.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
|
|
no functional changes, trivial patch.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
|
|
That's very useful to fetch the correct struct sr_info
from the PM handlers.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
|
|
Add OMAP3 SmartReflex IRQs in hwmod structures. Without these IRQs
being registered the SmartReflex driver will be unable to get the
IRQ numbers to handle notifications.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
|
|
The VPBOUNDINTST field of the ERRCONFIG register has an additional
functional meaning of force clearing the SR internal signal with VP
(sr_interruptz).
This can result in scenarios where the VP->SR protocol is violated
because the SR internal signal with VP is already high and VP will
never clear the vpirqclr signal.
Therefore during the next force update to reset to nominal voltage,
VP cannot pulse vpirqclr, so the PRCM HW cannot generate the tranxdone
IRQ and the situation is not recoverable until a cold reset is invoked.
To prevent this situation, check if status is set before clearing it
as this needs to be done only on a need basis.
Reported-by: Vincent Bour <v-bour@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
|
|
ERRCONFIG register has status bits that were intended not to
be destroyed by bad modification. We cleanup and simplify the
handling the status in the modify path.
Reported-by: Vincent Bour <v-bour@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
|
|
SmartReflex fix for erratum ID i724.
Since OMAP's VP and PRM modules do not get reset by warm reset,
we should ensure that proper shutdown procedure is followed prior
to allowing the kernel to reboot back up.
Without this, Smartreflex module might be left active or
system might be caught in an indeterminate sequence when
software controlled reboot is triggered, leaving the next
reboot behavior to be unpredictable.
In the case of hardware controlled warm reset such as that
by watchdog timer, prevention of this scenario is not possible.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
|
|
SmartReflex AVS Errorgen module supplies signals to Voltage
Processor. It is suggested that by disabling Errorgen module
before we disable VP, we might be able to ensure lesser
chances of race condition to occur in the system.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
|
|
sr_modify_mask takes mask, value as parameters, the usage
currently is value, mask which is wrong, as a result
vpboundint_st which was supposed to have been disabled,
does not get disabled.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
|
|
To set sr ntarget values for all volt_domain,
volt_table is retrieved by doing a look_up of 'vdd_name'
field from omap_hwmod but voltage domain pointer does not
belong to omap_hwmod and is not used anywhere else.
As a part of voltage layer and SR Layer clean up volt
pointer is removed from omap_hwmod and added in dev
attributes of SR. The value of the field must match
the voltage domain names for the binding to be effective.
Tested on OMAP3630 SDP, OMAP3530 Beagleboard and
OMAP4430 SDP Board.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Shweta Gulati <shweta.gulati@ti.com>
Acked by: Nishanth Menon <nm@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
|
|
Add minimal support for Nokia RM-696 board.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The PandaBoard features a Texas Instruments WiLink7 Bluetooth
chip, supported by the "btwilink" driver.
Signed-off-by: Mircea Gherzan <mgherzan@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Add platform data for drivers that recently appeared in kernel:
backlight and TWL4030 poweroff support.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
sdp4430_spi_board_info.irq was initialized to ETH_KS8851_IRQ and in
omap_4430sdp_init() overwritten with gpio_to_irq(ETH_KS8851_IRQ) before
sdp4430_spi_board_info was registered. This is a bit confusing, so
better don't initialize .irq and document that it is set later.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Add support for the EMAC Ethernet controller in the AM35xx SoC.
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
AM35xx SoCs include DaVinci EMAC IP. Initialization code in
board-am3517evm.c is pretty board independent and will work for any
AM35xx based board so move this code to it's own file to be reused by
other boards.
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
