summaryrefslogtreecommitdiff
path: root/arch/arm/mach-shmobile
AgeCommit message (Collapse)Author
2013-06-07ARM: shmobile: r8a7779: Add PCIe clocksPhil Edworthy
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-07ARM: shmobile: r8a73a4: add div6 clocksKuninori Morimoto
DIV6 clocks control each core clocks. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-07ARM: shmobile: r8a73a4: add div4 clocksKuninori Morimoto
DIV4 clocks control each core clocks. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-07ARM: shmobile: r8a73a4: add pll clocksKuninori Morimoto
PLL clocks are basis clock for other clock. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-07ARM: shmobile: r8a73a4: add main clockKuninori Morimoto
Almost all clock needs main clock which is basis clock on r8a73a4. This patch adds it, and, set parent clock via CKSCR register. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-07ARM: shmobile: r8a7740: add TPU PWM supportLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Simon Horman <horms@verge.net.au> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-07ARM: shmobile: r8a7740: Add I2C DT clock namesBastian Hecht
Add clock association for i2c0 and i2c1 for the new DT names. Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-07ARM: shmobile: r8a7740: Add interim sh-eth device name to clocks listBastian Hecht
When we use the ethernet device via DT setup, we need to add it to a lookup list until this is properly handled later in a DT-only fashion. Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-07ARM: shmobile: r8a7778: fixup Ether setup code positionKuninori Morimoto
Ether setup code position was scattering. This patch fixes it up Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-07ARM: shmobile: use do{ }while() on SH_CLK_SET_RATIO()Kuninori Morimoto
SH_CLK_SET_RATIO() will be trouble without this patch Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-07ARM: shmobile: remove ";" from SH_FIXED_RATIO_CLK*() macroKuninori Morimoto
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-06ARM: shmobile: sh73a0: Use DEFINE_RES_MEM*() everywhereSimon Horman
Convert code to use DEFINE_RES_MEM*() macros. These macros were already used in this file, this change makes their usage consistent throughout the file. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-06ARM: shmobile: r8a7778: correct model name in KconfigSergei Shtylyov
The correct model name is R-Car M1A or R8A77781; R8A77780 corresponds to R-Car M1S which is a SH based SoC. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [horms+renesas@verge.net.au: manually applied] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-06ARM: shmobile: r8a7740: Make private clock arrays staticLaurent Pinchart
Both clock-r8a7740.c and clock-r8a7790.c define a div4_clks array as non-static. Compiling support for both SoCs thus result in a symbol redefinition. Fix it by defining the arrays as static. To avoid further similar issues, also define the main_clks as static. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: marzen: Use RCAR_GP_PIN macroLaurent Pinchart
Replace hardcoded pin numbers with the RCAR_GP_PIN macro to make the code match the documentation. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: lager: Initialize pinmuxLaurent Pinchart
Initialize r8a7790 pinmuxing and register mappings for the two debug serial ports. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: bockw: add pinctrl supportKuninori Morimoto
SCIF0 support as 1st step Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: kzm9g: tidyup FSI pinctrlKuninori Morimoto
sh73a0 needs "sh_fsi2", not "sh_fsi2.0" Tested-by: Hiep Cao Minh <cm-hiep@jinso.co.jp> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7740 pinmux platform device cleanupMagnus Damm
Use DEFINE_RES_MEM() and platform_device_register_simple() to save a couple of lines of code. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7790: Configure R-Car GPIO for IRQ_TYPE_EDGE_BOTHSimon Horman
"gpio-rcar: Support IRQ_TYPE_EDGE_BOTH" adds support to the R-Car GPIO driver for IRQ_TYPE_EDGE_BOTH. As hardware support for this feature is not universal for all SoCs a flag, has_both_edge_trigger, has been added to the platform data of the driver to allow this feature to be enabled. As the r8a7790 SoC hardware supports this feature enable it. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: kzm9g-reference: Remove the VCCQ MC0 function GPIOLaurent Pinchart
The VCCQ MC0 power gate is now controlled by a regulator registered by the PFC driver. Remove the corresponding function GPIO. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: kzm9g: Remove the VCCQ MC0 function GPIOLaurent Pinchart
The VCCQ MC0 power gate is now controlled by a regulator registered by the PFC driver. Remove the corresponding function GPIO. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7779 pinmux platform device cleanupMagnus Damm
Use DEFINE_RES_MEM() to save a couple of lines of code. Signed-off-by: Magnus Damm <damm@opensource.se> [lp: Don't declare r8a7779_pfc_resources as const] Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7790: Remove all GPIOsLaurent Pinchart
Function GPIOs are not used anymore, and all code use the GPIO numbers directly. Remove the GPIOs enumeration. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7790: Register GPIO devicesLaurent Pinchart
Move GPIOs handling from the PFC device to separate GPIO devices. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7778: add GPIO supportKuninori Morimoto
This patch was tested on Bock-W board Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7740: Remove all GPIOsLaurent Pinchart
Function GPIOs are not used anymore, and all code use the GPIO numbers directly. Remove the GPIOs enumeration. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7740: Remove HDMI function GPIOsLaurent Pinchart
Those GPIOs have been deprecated by the pinctrl API. They are unused and unneeded, remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7740: Remove FSI function GPIOsLaurent Pinchart
Those GPIOs have been deprecated by the pinctrl API. They are unused and unneeded, remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7740: Remove CEU function GPIOsLaurent Pinchart
Those GPIOs have been deprecated by the pinctrl API. They are unused and unneeded, remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7740: Remove GETHER function GPIOsLaurent Pinchart
Those GPIOs have been deprecated by the pinctrl API. They are unused and unneeded, remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7740: Remove BSC function GPIOsLaurent Pinchart
Those GPIOs have been deprecated by the pinctrl API. They are unused and unneeded, remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7740: Remove INTC function GPIOsLaurent Pinchart
Those GPIOs have been deprecated by the pinctrl API. They are unused and unneeded, remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: r8a7740: Remove SCIF function GPIOsLaurent Pinchart
Those GPIOs have been deprecated by the pinctrl API. They are unused and unneeded, remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: armadillo800eva: Convert SCIFA1 to pinctrlBastian Hecht
We use the new pinctrl framework now. Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04cpufreq: rename index as driver_data in cpufreq_frequency_tableViresh Kumar
The "index" field of struct cpufreq_frequency_table was never an index and isn't used at all by the cpufreq core. It only is useful for cpufreq drivers for their internal purposes. Many people nowadays blindly set it in ascending order with the assumption that the core will use it, which is a mistake. Rename it to "driver_data" as that's what its purpose is. All of its users are updated accordingly. [rjw: Changelog] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-04ARM: shmobile: bonito: Don't configure LCDC routing manuallyLaurent Pinchart
LCDC routing is configured automatically in the PFC driver, don't configure it manually in board code. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04ARM: shmobile: bonito: Register pinctrl mapping for BSCLaurent Pinchart
Replace the GPIO-based BSC pinmux configuration by a pinctrl mapping. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04ARM: shmobile: bonito: Register pinctrl mapping for INTCLaurent Pinchart
Replace the GPIO-based INTC pinmux configuration by a pinctrl mapping. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04ARM: shmobile: bonito: Register pinctrl mapping for SCIFLaurent Pinchart
Replace the GPIO-based SCIF pinmux configuration by a pinctrl mapping. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04ARM: shmobile: bonito: Remove empty core devices arrayLaurent Pinchart
The core devices array is empty, passing it to platform_add_devices() is a no-op. Remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04ARM: shmobile: armadillo800eva: Replace GPIO_PORTx with GPIO port numbersLaurent Pinchart
The PFC GPIO API implementation moved to using port numbers. Replace all GPIO_PORTx enum usage with the corresponding port number. The GPIO_PORTx enum values are identical to the port number on this platform. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04ARM: shmobile: armadillo800eva: Don't configure LCDC routing manuallyLaurent Pinchart
LCDC routing is configured automatically in the PFC driver, don't configure it manually in board code. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04ARM: shmobile: armadillo800eva: Register pinctrl mapping for HDMILaurent Pinchart
Replace the GPIO-based HDMI pinmux configuration by a pinctrl mapping. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04ARM: shmobile: armadillo800eva: Register pinctrl mapping for FSILaurent Pinchart
Replace the GPIO-based FSI pinmux configuration by a pinctrl mapping. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04ARM: shmobile: armadillo800eva: Register pinctrl mapping for CEU0Laurent Pinchart
Replace the GPIO-based CEU0 pinmux configuration by a pinctrl mapping. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04ARM: shmobile: armadillo800eva: Register pinctrl mapping for GETHERLaurent Pinchart
Replace the GPIO-based GETHER pinmux configuration by a pinctrl mapping. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04ARM: shmobile: armadillo800eva: Register pinctrl mapping for INTCLaurent Pinchart
Replace the GPIO-based INTC pinmux configuration by a pinctrl mapping. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04ARM: shmobile: sh7372: Remove all GPIOsLaurent Pinchart
Function GPIOs are not used anymore, and all code use the GPIO numbers directly. Remove the GPIOs enumeration. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04ARM: shmobile: ap4evb: Register pinctrl mapping for USBHSLaurent Pinchart
Replace the GPIO-based USBHS pinmux configuration by a pinctrl mapping. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit (git 2.34.1) at 2025-09-19 14:05:26 +0000