| Age | Commit message (Collapse) | Author |
|---|
|
On the Qualcomm AR2 Gen1 platform the second PCIe host can be used
either as an RC or as an EP device. Add device node for the PCIe EP.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250221-sar2130p-pci-v3-7-61a0fdfb75b4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The `tx-sched-sp` property was removed in commit aed6864035b1 ("net:
stmmac: platform: Delete a redundant condition branch").
Therefore, it can be safely removed from the device tree.
Signed-off-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250218125157.412701-1-prabhakar.csengg@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Redmi 5A display uses pwm backlight, add support for it.
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250213-pm8937-pwm-v2-3-49ea59801a33@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add PWM/LPG node to the PM8937 dtsi so devices
which use this block can enable them.
Signed-off-by: Daniil Titov <daniilt971@gmail.com>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250213-pm8937-pwm-v2-2-49ea59801a33@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The MSI interrupt numbers of the PCIe3 controller are incorrect. Due
to this, the functional bring up of the QDSP6 processor on the PCIe
endpoint has failed. Correct the MSI interrupt numbers to properly
bring up the QDSP6 processor on the PCIe endpoint.
Fixes: d80c7fbfa908 ("arm64: dts: qcom: ipq9574: Add PCIe PHYs and controller nodes")
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Link: https://lore.kernel.org/r/20250313071422.510-1-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
num-channels and qcom,num-ees are required for BAM nodes without clock,
because the driver cannot ensure the hardware is powered on when trying to
obtain the information from the hardware registers. Specifying the node
without these properties is unsafe and has caused early boot crashes for
other SoCs before [1, 2].
Add the missing information from the hardware registers to ensure the
driver can probe successfully without causing crashes.
[1]: https://lore.kernel.org/r/CY01EKQVWE36.B9X5TDXAREPF@fairphone.com/
[2]: https://lore.kernel.org/r/20230626145959.646747-1-krzysztof.kozlowski@linaro.org/
Cc: stable@vger.kernel.org
Tested-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Fixes: ffadc79ed99f ("arm64: dts: qcom: ipq9574: Enable crypto nodes")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250212-bam-dma-fixes-v1-6-f560889e65d8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
num-channels and qcom,num-ees are required for BAM nodes without clock,
because the driver cannot ensure the hardware is powered on when trying to
obtain the information from the hardware registers. Specifying the node
without these properties is unsafe and has caused early boot crashes for
other SoCs before [1, 2].
Add the missing information from the hardware registers to ensure the
driver can probe successfully without causing crashes.
[1]: https://lore.kernel.org/r/CY01EKQVWE36.B9X5TDXAREPF@fairphone.com/
[2]: https://lore.kernel.org/r/20230626145959.646747-1-krzysztof.kozlowski@linaro.org/
Cc: stable@vger.kernel.org
Fixes: 7ff3da43ef44 ("arm64: dts: qcom: sa8775p: add QCrypto nodes")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250212-bam-dma-fixes-v1-5-f560889e65d8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
num-channels and qcom,num-ees are required for BAM nodes without clock,
because the driver cannot ensure the hardware is powered on when trying to
obtain the information from the hardware registers. Specifying the node
without these properties is unsafe and has caused early boot crashes for
other SoCs before [1, 2].
Add the missing information from the hardware registers to ensure the
driver can probe successfully without causing crashes.
[1]: https://lore.kernel.org/r/CY01EKQVWE36.B9X5TDXAREPF@fairphone.com/
[2]: https://lore.kernel.org/r/20230626145959.646747-1-krzysztof.kozlowski@linaro.org/
Cc: stable@vger.kernel.org
Fixes: 10e024671295 ("arm64: dts: qcom: sm8650: add interconnect dependent device nodes")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250212-bam-dma-fixes-v1-4-f560889e65d8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
num-channels and qcom,num-ees are required for BAM nodes without clock,
because the driver cannot ensure the hardware is powered on when trying to
obtain the information from the hardware registers. Specifying the node
without these properties is unsafe and has caused early boot crashes for
other SoCs before [1, 2].
Add the missing information from the hardware registers to ensure the
driver can probe successfully without causing crashes.
[1]: https://lore.kernel.org/r/CY01EKQVWE36.B9X5TDXAREPF@fairphone.com/
[2]: https://lore.kernel.org/r/20230626145959.646747-1-krzysztof.kozlowski@linaro.org/
Cc: stable@vger.kernel.org
Fixes: 433477c3bf0b ("arm64: dts: qcom: sm8550: add QCrypto nodes")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250212-bam-dma-fixes-v1-3-f560889e65d8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
num-channels and qcom,num-ees are required for BAM nodes without clock,
because the driver cannot ensure the hardware is powered on when trying to
obtain the information from the hardware registers. Specifying the node
without these properties is unsafe and has caused early boot crashes for
other SoCs before [1, 2].
Add the missing information from the hardware registers to ensure the
driver can probe successfully without causing crashes.
[1]: https://lore.kernel.org/r/CY01EKQVWE36.B9X5TDXAREPF@fairphone.com/
[2]: https://lore.kernel.org/r/20230626145959.646747-1-krzysztof.kozlowski@linaro.org/
Cc: stable@vger.kernel.org
Fixes: b92b0d2f7582 ("arm64: dts: qcom: sm8450: add crypto nodes")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250212-bam-dma-fixes-v1-2-f560889e65d8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
When num-channels and qcom,num-ees is not provided in devicetree, the
driver will try to read these values from the registers during probe but
this fails if the interconnect is not on and then crashes the system.
So we can provide these properties in devicetree (queried after patching
BAM driver to enable the necessary interconnect) so we can probe
cryptobam without reading registers and then also use the QCE as
expected.
Fixes: 4d29db204361 ("arm64: dts: qcom: sm8350: fix BAM DMA crash and reboot")
Fixes: f1040a7fe8f0 ("arm64: dts: qcom: sm8350: Add Crypto Engine support")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250212-bam-dma-fixes-v1-1-f560889e65d8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable the CDSP on QRD8750 board.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250312-b4-sm8750-cdsp-v4-3-4925d607cea6@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable the CDSP on MPT8750 board.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250312-b4-sm8750-cdsp-v4-2-4925d607cea6@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add nodes for the CDSP and its SMP2P. These are compatible with earlier
SM8650 with difference in one more interrupt.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250312-b4-sm8750-cdsp-v4-1-4925d607cea6@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable ADSP on QRD8750 board.
Reviewed-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250312-sm8750-audio-v3-4-40fbb3e53f95@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable ADSP on MTP8750 board.
Reviewed-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250312-sm8750-audio-v3-3-40fbb3e53f95@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add LPASS macro codecs and LPASS TLMM pin controller on Qualcomm SM8750
for proper sound support. These are fully compatible with earlier SM8550.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250312-sm8750-audio-v3-2-40fbb3e53f95@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add nodes for IPCC mailbox, SMP2P for ADSP, AOSS and the ADSP remoteproc
PAS loader (compatible with SM8550).
Reviewed-by: Melody Olvera <quic_molvera@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250312-sm8750-audio-v3-1-40fbb3e53f95@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable MMC and relevant pinctrl entries.
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20250304113400.2806670-1-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the SM8750 nodes for the UFS Inline Crypto Engine (ICE).
Signed-off-by: Gaurav Kashyap <quic_gaurkash@quicinc.com>
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250113-sm8750_crypto_master-v1-6-d8e265729848@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the SM8750 nodes for the True Random Number Generator (TRNG).
Signed-off-by: Gaurav Kashyap <quic_gaurkash@quicinc.com>
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Link: https://lore.kernel.org/r/20250113-sm8750_crypto_master-v1-4-d8e265729848@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the QCE and Crypto BAM DMA nodes.
Signed-off-by: Gaurav Kashyap <quic_gaurkash@quicinc.com>
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Link: https://lore.kernel.org/r/20250113-sm8750_crypto_master-v1-2-d8e265729848@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
All Qualcomm firmwares uploaded to linux-firmware are in MBN format,
instead of split MDT. Firmware for boards here is not yet in
linux-firmware, but if it gets accepted it will be MBN, not MDT.
Change might affect users of DTS which rely on manually placed firmware
files, not coming from linux-firmware package.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250108120530.156928-1-krzysztof.kozlowski@linaro.org
[bjorn: Updated subject]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support for samsung,s6sy761 touchscreen.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250225-starqltechn_integration_upstream-v9-9-a5d80375cb66@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support for s2dos05 display / touchscreen PMIC
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250225-starqltechn_integration_upstream-v9-8-a5d80375cb66@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support for max77705 MFD device. Supported sub-devices:
charger, fuelgauge, haptic, led
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250225-starqltechn_integration_upstream-v9-7-a5d80375cb66@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support for phone buttons.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250225-starqltechn_integration_upstream-v9-6-a5d80375cb66@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Starqltechn has 2 reserved gpio ranges <27 4>, <85 4>.
<27 4> is spi for eSE(embedded Secure Element).
<85 4> is spi for fingerprint.
Remove excess reserved gpio regions.
Fixes: d711b22eee55 ("arm64: dts: qcom: starqltechn: add initial device tree for starqltechn")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250225-starqltechn_integration_upstream-v9-5-a5d80375cb66@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Fixes: d711b22eee55 ("arm64: dts: qcom: starqltechn: add initial device tree for starqltechn")
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250225-starqltechn_integration_upstream-v9-4-a5d80375cb66@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Usb regulator was wrongly pointed to vreg_l1a_0p875.
However, on starqltechn it's powered from vreg_l5a_0p8.
Fixes: d711b22eee55 ("arm64: dts: qcom: starqltechn: add initial device tree for starqltechn")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250225-starqltechn_integration_upstream-v9-3-a5d80375cb66@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Starqltechn has broadcom chip for wifi, so sdm845 wifi part
can be disabled.
Fixes: d711b22eee55 ("arm64: dts: qcom: starqltechn: add initial device tree for starqltechn")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Fixes: d711b22eee55 ("arm64: dts: qcom: starqltechn: add initial device tree for starqltechn")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250225-starqltechn_integration_upstream-v9-2-a5d80375cb66@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Leave gmu enabled, because it's only probed when
GPU is.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250225-starqltechn_integration_upstream-v9-1-a5d80375cb66@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The Lenovo ThinkPad T14s Gen6 provides external DisplayPort on all
2 USB Type-C ports. Each one of this ports is connected to a dedicated
DisplayPort controller.
Due to support missing in the USB/DisplayPort combo PHY driver,
the external DisplayPort is limited to 2 lanes.
So enable the first and second DisplayPort controllers and limit their
data lanes number to 2.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250304-x1e80100-dts-crd-t14s-enable-typec-retimers-v6-4-e5a49fae4e94@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The Lenovo ThinkPad T14s Gen6 laptop comes with 3 Parade PS8830 retimers,
one for each Type-C port. These handle the orientation and altmode
switching and are controlled over I2C. In the connection chain, they sit
between the USB/DisplayPort combo PHY and the Type-C connector.
Describe the retimers and all gpio controlled voltage regulators used by
each retimer. Also, modify the pmic glink graph to include the retimers in
between the SuperSpeed/Sideband in endpoints and the QMP PHY out
endpoints.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250304-x1e80100-dts-crd-t14s-enable-typec-retimers-v6-3-e5a49fae4e94@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The X Elite CRD provides external DisplayPort on all 3 USB Type-C ports.
Each one of this ports is connected to a dedicated DisplayPort
controller.
Due to support missing in the USB/DisplayPort combo PHY driver,
the external DisplayPort is limited to 2 lanes.
So enable all 3 remaining DisplayPort controllers and limit their data
lanes number to 2.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250304-x1e80100-dts-crd-t14s-enable-typec-retimers-v6-2-e5a49fae4e94@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The X Elite CRD board comes with 3 Parade PS8830 retimers, one for each
Type-C port. These handle the orientation and altmode switching and are
controlled over I2C. In the connection chain, they sit between the
USB/DisplayPort combo PHY and the Type-C connector.
Describe the retimers and all gpio controlled voltage regulators used by
each retimer. Also, modify the pmic glink graph to include the retimers in
between the SuperSpeed/Sideband in endpoints and the QMP PHY out endpoints.
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250304-x1e80100-dts-crd-t14s-enable-typec-retimers-v6-1-e5a49fae4e94@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
These regulators power some electronic components onboard. They're
most likely kept online by other pieces of firmware, but you can never
be sure enough.
Fixes: 09d77be56093 ("arm64: dts: qcom: Add support for X1-based Surface Laptop 7 devices")
Reported-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250304-topic-sl7_vregs_aon-v1-1-b2dc706e4157@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Only CPU0 Embedded Trace Extension (ETE) was added, but there's one
for all 8 CPUs, so add the missing ones.
Fixes: 256e6937e48a ("arm64: dts: qcom: sm8650: Add coresight nodes")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250227-topic-sm8650-upstream-add-all-coresight-cpus-v3-1-48ae516be0d5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the WiFi/BT nodes for QCP and describe the regulators for the WCN7850
combo chip using the new power sequencing bindings. All voltages are
derived from chained fixed regulators controlled using a single GPIO.
The same setup also works for CRD (and likely most of the other X1E80100
laptops). However, unlike the QCP they use soldered or removable M.2 cards
supplied by a single 3.3V fixed regulator. The other necessary voltages are
then derived inside the M.2 card. Describing this properly requires
new bindings, so this commit only adds QCP for now.
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250217-x1e80100-pwrseq-qcp-v3-1-a0525cc01666@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add RPMh stats to read low power statistics for various subsystem
and SoC sleep modes.
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> # 8750 QRD
Link: https://lore.kernel.org/r/20250218-sm8750_stats-v1-1-8902e213f82d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
There should be exactly one space before and after '=', and one space
before '{'. No functional impact. Verified with comparing decompiled
DTB (dtx_diff and fdtdump+diff).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250219090751.124267-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
DTS coding style expects labels to be lowercase. No functional impact.
Verified with comparing decompiled DTB (dtx_diff and fdtdump+diff).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250219090751.124267-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the necessary supplies and set an appropriete firmware-name for the
modem and enable it.
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250222-fp3-remoteprocs-firmware-v1-4-237ed21c334a@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Set the paths where the device-specific firmware can be found for this
device.
Fairphone 3 was shipped with secure-boot off so any testkey-signed
firmware is accepted.
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250222-fp3-remoteprocs-firmware-v1-3-237ed21c334a@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
As is common style nowadays, make sure there's an empty line between
regulator subnodes.
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250222-fp3-remoteprocs-firmware-v1-2-237ed21c334a@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
As is common style nowadays, move the status properties to be the last
property of a node.
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250222-fp3-remoteprocs-firmware-v1-1-237ed21c334a@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Command DB is a database in the shared memory of QCOM SoCs, that
provides a mapping between resource key and the resource address for a
system resource managed by a remote processor. The data is stored in a
shared memory region and is loaded by the remote processor. Therefore,
enabling Command DB ensures that those resources function properly.
Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
Link: https://lore.kernel.org/r/20250221-add_command_db_support-v1-1-d60acbf913aa@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The property qcom,ath11k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-13-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The property qcom,ath11k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-12-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The property qcom,ath11k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-11-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
