| Age | Commit message (Collapse) | Author |
|---|
|
Marc reported that enabling protected mode on a device with GICv2
doesn't fail gracefully as one would expect, and leads to a host
kernel crash.
As it turns out, the first half of pKVM init happens before the vgic
probe, and so by the time we find out we have a GICv2 we're already
committed to keeping the pKVM vectors installed at EL2 -- pKVM rejects
stub HVCs for obvious security reasons. However, the error path on KVM
init leads to teardown_hyp_mode() which unconditionally frees hypervisor
allocations (including the EL2 stacks and per-cpu pages) under the
assumption that a previous cpu_hyp_uninit() execution has reset the
vectors back to the stubs, which is false with pKVM.
Interestingly, host stage-2 protection is not enabled yet at this point,
so this use-after-free may go unnoticed for a while. The issue becomes
more obvious after the finalize_pkvm() call.
Fix this by keeping track of the CPUs on which pKVM is initialized in
the kvm_hyp_initialized per-cpu variable, and use it from
teardown_hyp_mode() to skip freeing pages that are in fact used.
Fixes: a770ee80e662 ("KVM: arm64: pkvm: Disable GICv2 support")
Reported-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250626101014.1519345-1-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The ACSPCIE1 module on TI's J784S4 SoC is capable of driving the reference
clock required by the PCIe Endpoint device. It is an alternative to on-
board and external reference clock generators.
Add the device-tree node for the same.
Signed-off-by: Parth Pancholi <parth.pancholi@toradex.com>
Link: https://lore.kernel.org/r/20250513152155.1590689-1-parth105105@gmail.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
According to the "GPIO Expander Map / Table" section of the J722S EVM
Schematic within the Evaluation Module Design Files package [0], the
GPIO Pin P05 located on the GPIO Expander 1 (I2C0/0x23) has to be pulled
down to select the Type-C interface. Since commit under Fixes claims to
enable the Type-C interface, update the property within "p05-hog" from
"output-high" to "output-low", thereby switching from the Type-A
interface to the Type-C interface.
[0]: https://www.ti.com/lit/zip/sprr495
Cc: stable@vger.kernel.org
Fixes: 485705df5d5f ("arm64: dts: ti: k3-j722s: Enable PCIe and USB support on J722S-EVM")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20250623100657.4082031-1-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
In the unlikely case pKVM failed to allocate carveout, the error path
tries to access NULL ptr when it de-reference the SVE state from the
uninitialized nVHE per-cpu base.
[ 1.575420] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 1.576010] pc : teardown_hyp_mode+0xe4/0x180
[ 1.576920] lr : teardown_hyp_mode+0xd0/0x180
[ 1.577308] sp : ffff8000826fb9d0
[ 1.577600] x29: ffff8000826fb9d0 x28: 0000000000000000 x27: ffff80008209b000
[ 1.578383] x26: ffff800081dde000 x25: ffff8000820493c0 x24: ffff80008209eb00
[ 1.579180] x23: 0000000000000040 x22: 0000000000000001 x21: 0000000000000000
[ 1.579881] x20: 0000000000000002 x19: ffff800081d540b8 x18: 0000000000000000
[ 1.580544] x17: ffff800081205230 x16: 0000000000000152 x15: 00000000fffffff8
[ 1.581183] x14: 0000000000000008 x13: fff00000ff7f6880 x12: 000000000000003e
[ 1.581813] x11: 0000000000000002 x10: 00000000000000ff x9 : 0000000000000000
[ 1.582503] x8 : 0000000000000000 x7 : 7f7f7f7f7f7f7f7f x6 : 43485e525851ff30
[ 1.583140] x5 : fff00000ff6e9030 x4 : fff00000ff6e8f80 x3 : 0000000000000000
[ 1.583780] x2 : 0000000000000000 x1 : 0000000000000002 x0 : 0000000000000000
[ 1.584526] Call trace:
[ 1.584945] teardown_hyp_mode+0xe4/0x180 (P)
[ 1.585578] init_hyp_mode+0x920/0x994
[ 1.586005] kvm_arm_init+0xb4/0x25c
[ 1.586387] do_one_initcall+0xe0/0x258
[ 1.586819] do_initcall_level+0xa0/0xd4
[ 1.587224] do_initcalls+0x54/0x94
[ 1.587606] do_basic_setup+0x1c/0x28
[ 1.587998] kernel_init_freeable+0xc8/0x130
[ 1.588409] kernel_init+0x20/0x1a4
[ 1.588768] ret_from_fork+0x10/0x20
[ 1.589568] Code: f875db48 8b1c0109 f100011f 9a8903e8 (f9463100)
[ 1.590332] ---[ end trace 0000000000000000 ]---
As Quentin pointed, the order of free is also wrong, we need to free
SVE state first before freeing the per CPU ptrs.
I initially observed this on 6.12, but I could also repro in master.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Fixes: 66d5b53e20a6 ("KVM: arm64: Allocate memory mapped at hyp for host sve state in pKVM")
Reviewed-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250625123058.875179-1-smostafa@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
host_stage2_adjust_range() tries to find the largest block mapping that
fits within a memory or mmio region (represented by a kvm_mem_range in
this function) during host stage-2 faults under pKVM. To do so, it walks
the host stage-2 page-table, finds the faulting PTE and its level, and
then progressively increments the level until it finds a granule of the
appropriate size. However, the condition in the loop implementing the
above is broken as it checks kvm_level_supports_block_mapping() for the
next level instead of the current, so pKVM may attempt to map a region
larger than can be covered with a single block.
This is not a security problem and is quite rare in practice (the
kvm_mem_range check usually forces host_stage2_adjust_range() to choose a
smaller granule), but this is clearly not the expected behaviour.
Refactor the loop to fix the bug and improve readability.
Fixes: c4f0935e4d95 ("KVM: arm64: Optimize host memory aborts")
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250625105548.984572-1-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The state of the vcpu's MI line should be asserted when its
ICH_HCR_EL2.En is set and ICH_MISR_EL2 is non-zero. Using bitwise AND
(&=) directly for this calculation will not give us the correct result
when the LSB of the vcpu's ICH_MISR_EL2 isn't set. Correct this by
directly computing the line level with a logical AND operation.
Signed-off-by: Wei-Lin Chang <r09922117@csie.ntu.edu.tw>
Link: https://lore.kernel.org/r/20250625084709.3968844-1-r09922117@csie.ntu.edu.tw
[maz: drop the level check from the original code]
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
We should not rely on the bootloader to set up the pinmux of the debug
UART port. Let's add pin definitions for uart4 to tlmm and bind them to
the relevant device node.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250625152839.193672-1-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
New dtschema v2025.6 enforces different naming on I2C nodes thus new
dtbs_check warnings appeared for I2C GPIO nodes:
exynos5433-tm2.dtb: i2c-gpio-0 (i2c-gpio):
$nodename:0: 'i2c-gpio-0' does not match '^i2c(@.+|-[a-z0-9]+)?$'
exynos5433-tm2.dtb: i2c-gpio-0 (i2c-gpio):
Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'amplifier@31' were unexpected)
Rename the nodes to a generic i2c-[0-9]+ style with numbers continuing
the SoC I2C controller indexing (3 controllers) for simplicity and
obviousness, even if the SoC I2C controller is not enabled on given
board. The names anyway would not conflict with SoC ones because of
unit addresses.
Verified with comparing two fdt (after fdtdump).
Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Closes: https://lore.kernel.org/all/aCtD7BH5N_uPGkq7@shikoro/
Link: https://lore.kernel.org/r/20250612095549.77954-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Fold kvm_arch_irqfd_route_changed() into kvm_arch_update_irqfd_routing().
Calling arch code to know whether or not to call arch code is absurd.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250611224604.313496-35-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Don't bother WARNing if updating an IRTE route fails now that vendor code
provides much more precise WARNs. The generic WARN doesn't provide enough
information to actually debug the problem, and has obviously done nothing
to surface the myriad bugs in KVM x86's implementation.
Drop all of the associated return code plumbing that existed just so that
common KVM could WARN.
Link: https://lore.kernel.org/r/20250611224604.313496-34-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix another set of FP/SIMD/SVE bugs affecting NV, and plugging some
missing synchronisation
- A small fix for the irqbypass hook fixes, tightening the check and
ensuring that we only deal with MSI for both the old and the new
route entry
- Rework the way the shadow LRs are addressed in a nesting
configuration, plugging an embarrassing bug as well as simplifying
the whole process
- Add yet another fix for the dreaded arch_timer_edge_cases selftest
RISC-V:
- Fix the size parameter check in SBI SFENCE calls
- Don't treat SBI HFENCE calls as NOPs
x86 TDX:
- Complete API for handling complex TDVMCALLs in userspace.
This was delayed because the spec lacked a way for userspace to
deny supporting these calls; the new exit code is now approved"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: TDX: Exit to userspace for GetTdVmCallInfo
KVM: TDX: Handle TDG.VP.VMCALL<GetQuote>
KVM: TDX: Add new TDVMCALL status code for unsupported subfuncs
KVM: arm64: VHE: Centralize ISBs when returning to host
KVM: arm64: Remove cpacr_clear_set()
KVM: arm64: Remove ad-hoc CPTR manipulation from kvm_hyp_handle_fpsimd()
KVM: arm64: Remove ad-hoc CPTR manipulation from fpsimd_sve_sync()
KVM: arm64: Reorganise CPTR trap manipulation
KVM: arm64: VHE: Synchronize CPTR trap deactivation
KVM: arm64: VHE: Synchronize restore of host debug registers
KVM: arm64: selftests: Close the GIC FD in arch_timer_edge_cases
KVM: arm64: Explicitly treat routing entry type changes as changes
KVM: arm64: nv: Fix tracking of shadow list registers
RISC-V: KVM: Don't treat SBI HFENCE calls as NOPs
RISC-V: KVM: Fix the size parameter check in SBI SFENCE calls
|
|
The Firefly ROC-RK3588S-PC is a SBC based on the Rockchip RK3588s SoC.
Link: https://wiki.t-firefly.com/en/Station-M3/index.html
The device contains the following hardware that is tested/working:
- 32 or 64GB eMMC
- SDMMC card slot
- Realtek USB WiFi 5/BT
- NVME 2242 socket
- 4 or 8GB of RAM
- RTL8211 GbE
- USB 3.0 port
- USB 2.0 port
- HDMI port
Signed-off-by: Hsun Lai <i@chainsx.cn>
Link: https://lore.kernel.org/r/20250609113044.8846-3-i@chainsx.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Enable the Mali-450 MP2 GPU on the Radxa E20C.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20250518225418.682182-4-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add a GPU node and a opp-table for the Mali-450 MP2 in the RK3528 SoC.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20250518225418.682182-3-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
AM64X SoC has one instance of PCIe which is PCIe0. To support PCIe boot
on AM64X SoC, PCIe0 needs to be in endpoint mode and it needs to be
functional at all stages of PCIe boot process. Thus add the
"bootph-all" boot phase tag to "pcie0_ep" device tree node.
Signed-off-by: Hrushikesh Salunke <h-salunke@ti.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20250610054920.2395509-1-h-salunke@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
Add the node for the AUDIO_EXT_REFCLK0 clock output.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Link: https://lore.kernel.org/r/20250618090724.1917731-1-mwalle@kernel.org
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
Pinmux registers ends at 0x000f42ac (including). Thus, the size argument
of the pinctrl-single node has to be 0x2b0. Fix it.
This will fix the following error:
pinctrl-single f4000.pinctrl: mux offset out of range: 0x2ac (0x2ac)
Fixes: 29075cc09f43 ("arm64: dts: ti: Introduce AM62P5 family of SoCs")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Link: https://lore.kernel.org/r/20250618065239.1904953-1-mwalle@kernel.org
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
Describe the octal SPI NAND available on the low-power starter kit.
The pinctrl configuration comes from TI fork.
With the current mainline tree, we currently get the following
performances:
eraseblock write speed is 7507 KiB/s
eraseblock read speed is 15802 KiB/s
page write speed is 7551 KiB/s
page read speed is 15609 KiB/s
2 page write speed is 7551 KiB/s
2 page read speed is 15609 KiB/s
erase speed is 284444 KiB/s
2x multi-block erase speed is 512000 KiB/s
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20250613182356.1272642-1-miquel.raynal@bootlin.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
Add McASP 0-4 instances and keep them disabled because several
required properties are missing as they are board specific.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Link: https://lore.kernel.org/r/20250604104656.38752-2-j-choudhary@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
Enable internal bias pull-ups on the SoC-side I2C_3_HDMI that do not have
external pull resistors populated on the SoM. This ensures proper
default line levels.
Fixes: 87f95ea316ac ("arm64: dts: ti: Add Toradex Verdin AM62P")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20250529102601.452859-1-ghidoliemanuele@gmail.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
Enable internal bias pull-ups on the SoC-side I2C buses that do not have
external pull resistors populated on the SoM. This ensures proper
default line levels.
Cc: stable@vger.kernel.org
Fixes: 316b80246b16 ("arm64: dts: ti: add verdin am62")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20250528110741.262336-1-ghidoliemanuele@gmail.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
For the ICSSG PHYs to operate correctly, a 25 MHz reference clock must
be supplied on CLKOUT0. Previously, our bootloader configured this
clock, which is why the PRU Ethernet ports appeared to work, but the
change never made it into the device tree.
Add clock properties to make EXT_REFCLK1.CLKOUT0 output a 25MHz clock.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Fixes: 87adfd1ab03a ("arm64: dts: ti: am642-phyboard-electra: Add PRU-ICSSG nodes")
Link: https://lore.kernel.org/r/20250521053339.1751844-1-w.egorov@phytec.de
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
After patch done on TI_MESSAGE_MANAGER[1] and TI_SCI_PROTOCOL[2] driver
select on ARCH_K3 are not needed anymore.
Select MAILBOX by default is not needed anymore[3],
PM_GENERIC_DOMAIN if PM was enabled by default so not needed.
Remove it and give possibility to enable this driver in modules.
[1] https://lore.kernel.org/all/20180828005311.8529-1-nm@ti.com/
[2] https://lore.kernel.org/all/20250220-ti-firmware-v2-1-ff26883c6ce9@baylibre.com/
[3] https://lore.kernel.org/all/20250507135213.g6li6ufp3cosxoys@stinging/
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Link: https://lore.kernel.org/r/20250519-kconfig-v2-1-56c1a0137a0f@baylibre.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
When updating IRTEs in response to a GSI routing or IRQ bypass change,
pass the new/current routing information along with the associated irqfd.
This will allow KVM x86 to harden, simplify, and deduplicate its code.
Since adding/removing a bypass producer is now conveniently protected with
irqfds.lock, i.e. can't run concurrently with kvm_irq_routing_update(),
use the routing information cached in the irqfd instead of looking up
the information in the current GSI routing tables.
Opportunistically convert an existing printk() to pr_info() and put its
string onto a single line (old code that strictly adhered to 80 chars).
Link: https://lore.kernel.org/r/20250611224604.313496-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When unmapping a vLPI, WARN if nullifying vCPU affinity fails, not just if
failure occurs when freeing an ITE. If undoing vCPU affinity fails, then
odds are very good that vLPI state tracking has has gotten out of whack,
i.e. that KVM and the GIC disagree on the state of an IRQ/vLPI. At best,
inconsistent state means there is a lurking bug/flaw somewhere. At worst,
the inconsistency could eventually be fatal to the host, e.g. if an ITS
command fails because KVM's view of things doesn't match reality/hardware.
Note, only the call from kvm_arch_irq_bypass_del_producer() by way of
kvm_vgic_v4_unset_forwarding() doesn't already WARN. Common KVM's
kvm_irq_routing_update() WARNs if kvm_arch_update_irqfd_routing() fails.
For that path, if its_unmap_vlpi() fails in kvm_vgic_v4_unset_forwarding(),
the only possible causes are that the GIC doesn't have a v4 ITS (from
its_irq_set_vcpu_affinity()):
/* Need a v4 ITS */
if (!is_v4(its_dev->its))
return -EINVAL;
guard(raw_spinlock)(&its_dev->event_map.vlpi_lock);
/* Unmap request? */
if (!info)
return its_vlpi_unmap(d);
or that KVM has gotten out of sync with the GIC/ITS (from its_vlpi_unmap()):
if (!its_dev->event_map.vm || !irqd_is_forwarded_to_vcpu(d))
return -EINVAL;
All of the above failure scenarios are warnable offences, as they should
never occur absent a kernel/KVM bug.
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/all/aFWY2LTVIxz5rfhh@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"There's nothing major (even the vmalloc one is just suppressing a
potential warning) but all worth having, nonetheless.
- Suppress KASAN false positive in stack unwinding code
- Drop redundant reset of the GCS state on exec()
- Don't try to descend into a !present PMD when creating a huge
vmap() entry at the PUD level
- Fix a small typo in the arm64 booting Documentation"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/ptrace: Fix stack-out-of-bounds read in regs_get_kernel_stack_nth()
arm64/gcs: Don't call gcs_free() during flush_gcs()
arm64: Restrict pagetable teardown to avoid false warning
docs: arm64: Fix ICC_SRE_EL2 register typo in booting.rst
|
|
Add a new gpu node in mt8370.dtsi to enable support for the
ARM Mali G57 MC2 GPU (Valhall-JM) found on the MT8370 SoC, using the
Panfrost driver.
On a Mediatek Genio 510 EVK board, the panfrost driver probed with the
following message:
```
panfrost 13000000.gpu: clock rate = 390000000
panfrost 13000000.gpu: mali-g57 id 0x9093 major 0x0 minor 0x0 status 0x0
panfrost 13000000.gpu: features: 00000000,000019f7, issues: 00000003,
80000400
panfrost 13000000.gpu: Features: L2:0x08130206 Shader:0x00000000
Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
panfrost 13000000.gpu: shader_present=0x5 l2_present=0x1
[drm] Initialized panfrost 1.3.0 for 13000000.gpu on minor 0
```
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250509-mt8370-enable-gpu-v6-5-2833888cb1d3@collabora.com
|
|
Add arch_stack_walk_reliable(), which will be used during kernel live
patching to detect when threads have completed executing old versions of
functions.
Note that arch_stack_walk_reliable() only needs to guarantee that it
returns an error code when it cannot provide a reliable stacktrace. It
is not required to provide a reliable stacktrace in all scenarios so
long as it returns said error code.
At present we can only reliably unwind up to an exception boundary. In
future we should be able to improve this with additional data from the
compiler (e.g. sframe).
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250320171559.3423224-2-song@kernel.org
[ Mark: Simplify logic, clarify commit message ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Andrea della Porta <andrea.porta@suse.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Song Liu <song@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250521111000.2237470-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
If kretprobe_find_ret_addr() fails to find the original return address,
it returns 0. Check for this case so that a reliable stacktrace won't
silently ignore it.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Andrea della Porta <andrea.porta@suse.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Song Liu <song@kernel.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-and-tested-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250521111000.2237470-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
To enable late module patching, livepatch modules need to be able to
apply some of their relocations well after being loaded. In this
scenario however, the livepatch module text and data is already RX-only,
so special treatment is needed to make the late relocations possible. To
do this, use the text-poking API for these late relocations.
This patch is partially based off commit 88fc078a7a8f6 ("x86/module: Use
text_poke() for late relocations").
Signed-off-by: Dylan Hatch <dylanbhatch@google.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250603223417.3700218-1-dylanbhatch@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Ringneck
The Haikou Video Demo adapter has a proprietary connector for a camera
module which has an OV5675 camera sensor and a companion DW9714 focus
lens driver.
This adds support for the camera module on PX30 Ringneck module fitted
on a Haikou devkit with the Haikou Video Demo adapter.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250610-ringneck-haikou-video-demo-cam-v2-3-de1bf87e0732@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
This will make it slightly easier for Device Trees (and Overlays) to
link the ISP controller to a video input such as a CSI camera while also
bringing it closer to what's been done already for the DSI controller.
Suggested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250610-ringneck-haikou-video-demo-cam-v2-2-de1bf87e0732@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
dtc complains with the following message for DTSes which use the ISP:
arch/arm64/boot/dts/rockchip/px30.dtsi:1272.19-1276.6: Warning (graph_child_address): /isp@ff4a0000/ports/port@0: graph node has single child node 'endpoint@0', #address-cells/#size-cells are not necessary
Typically, it is expected from the device DTS(I) to update the SoC DTSI
nodes if they have more than one endpoint, so let's assume there's only
one endpoint in port@0 by default, instead of forcing board DTS(I)s to
/delete-property/ address-cells and size-cells to make dtc happy.
Because PX30 PP1516/EVB's endpoint@0 is the only endpoint and
considering its parent node now has no address-cells property, dtc
complains (same messages for PX30 EVB):
arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi:447.29-451.6: Warning (avoid_default_addr_size): /isp@ff4a0000/ports/port@0/endpoint@0: Relying on default #address-cells value
arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi:447.29-451.6: Warning (avoid_default_addr_size): /isp@ff4a0000/ports/port@0/endpoint@0: Relying on default #size-cells value
arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3146w-a2.dtb: Warning (avoid_unnecessary_addr_size): Failed prerequisite 'avoid_default_addr_size'
arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3146w-a2.dtb: Warning (unique_unit_address_if_enabled): Failed prerequisite 'avoid_default_addr_size'
arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi:447.29-451.6: Warning (graph_endpoint): /isp@ff4a0000/ports/port@0/endpoint@0: graph node '#address-cells' is -1, must be 1
arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi:447.29-451.6: Warning (graph_endpoint): /isp@ff4a0000/ports/port@0/endpoint@0: graph node '#size-cells' is -1, must be 0
arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3146w-a2.dtb: Warning (graph_child_address): Failed prerequisite 'graph_endpoint'
so we fix that by removing the reg property. dtc still complains (same
messages for PX30 EVB):
arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi:447.29-450.6: Warning (unit_address_vs_reg): /isp@ff4a0000/ports/port@0/endpoint@0: node has a unit name, but no reg or ranges property
so we also remove the @0 suffix off the node name.
Fixes: 8df7b4537dfb ("arm64: dts: rockchip: add isp node for px30")
Fixes: 474a77395be2 ("arm64: dts: rockchip: hook up camera on px30-evb")
Fixes: 56198acdbf0d ("arm64: dts: rockchip: add px30-pp1516 base dtsi and board variants")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250610-ringneck-haikou-video-demo-cam-v2-1-de1bf87e0732@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The RTC module on S32G2/S32G3 based SoCs is used as a wakeup source from
system suspend.
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
S32G3 and S32G2 have the same 6 SPI devices, add the DT entries. Devices
are all the same except spi0 has 8 chip selects instead of 5. Clock
settings for the chip rely on ATF Firmware [1].
[1]: https://github.com/nxp-auto-linux/arm-trusted-firmware
Co-developed-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: Larisa Grigore <Larisa.Grigore@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Set ethernet1 alias to EQOS interface on phyBOARD-Segin-i.MX93 marking
it the secondary networking interface. The primary ethernet0 interface
is already set by the SoM include file (imx93-phycore-som.dtsi).
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Move alias for ethernet0 interface to the phyCORE-i.MX93 SoM include
file. The reason behind it is that the physical location of the PHY chip
connected to FEC interface is on the SoM itself and alias thus belongs
into the SoM device-tree. Consequently, it can be used by all boards
based on the phyCORE-i.MX93 SoM (phyBOARD-Segin and phyBOARD-Nash).
This also enables us to mark FEC interface as the primary / first for
networking in the bootloader and systemd (predictable interface names).
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable EASRC support in tlv320aic32x4 sound card.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable EASRC support in tlv320aic32x4 sound card.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add the BOE av123z7m-n17 variant of the Moduline Display, this variant
comes with a 12.3" 1920x720 display.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add the BOE av101hdt-a10 variant of the Moduline Display, this variant
comes with a 10.1 1280x720 display with a touchscreen (not working in
mainline).
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The Moduline Display platform is a part of the wider GOcontroll Moduline
ecosystem. These are embedded controllers that focus on modularity with
their swappable IO modules.
The base Moduline Display board includes a board-to-board connector with
various busses to enable adding new display types required by the
application. It includes 2 Moduline IO module slots, a simple mono
codec/amplifier, a four channel adc, 2 CAN busses, an RTC and optional
wifi/bluetooth.
busses to the display adapter include:
- 4 lane LVDS
- 4 lane MIPI-DSI
- 4 lane MIPI-CSI
- HDMI 2.0a
- USB 2.0
- I2S
- I2C
- SPI
Also a couple of GPIO and PWM pins for controlling various ICs on the
display adapter board.
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The Ka-Ro Electronics tx8p-ml81 is a COM based on the imx8mp SOC. It has
2 GB of ram and 8 GB of eMMC storage on board.
Add it to enable boards based on this Module
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Currently to configure each IOMUXC_SW_PAD_CTL_PAD the raw value of this
register is written in the dts, these values are not obvious. Add defines
which describe the fields of this register which can be or-ed together to
produce readable settings.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add power-domain nodes for the power controller on RK3528.
Only PD_GPU can fully be powered down. PD_RKVDEC, PD_RKVENC, PD_VO and
PD_VPU are idle only power domains used by miscellaneous devices.
Because multiple of the miscellaneous device types currently complain
about the use of a power-domains prop, only PD_GPU is enabled.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20250518220707.669515-5-jonas@kwiboo.se
[changed to using numeric values, until the next merge-window]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The ArmSoM Sige5 has several USB ports: a Type-A USB 3 port (USB2 lines
going through a hub), a Type-A USB 2.0 port (also going through a hub),
a Type-C DC input port that has absolutely no USB data connection and a
Type-C port with USB3.2 Gen1x1 that's also the maskrom programming port.
Enable these ports, and set the device role to be host for the host
ports.
The data capable Type-C USB port uses a fusb302 for data role switching.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250619-rk3576-sige5-usb-v5-2-9069a7e750e1@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
List both CPU supply regulators which drive the little and big CPU
clusters, respectively, so that cpufreq can pick them up.
Without this patch the cpufreq governor attempts to raise the big CPU
frequency under high load, while its supply voltage stays at 850000 uV.
This causes system instability and, in my case, random reboots.
With this patch, supply voltages are adjusted in step with frequency
changes from 700000-737000 uV in idle to 950000 uV under full load,
and the system appears to be stable.
While at this, list all CPU supplies for completeness.
Cc: stable@vger.kernel.org
Fixes: 40f742b07ab2 ("arm64: dts: rockchip: Add rk3576-armsom-sige5 board")
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20250614-sige5-updates-v2-1-3bb31b02623c@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add support for the Broadcom based WiFi/Bluetooth module (BW3752-50B1)
found in ArmSoM Sige5 boards version 1.2. This includes SDIO connected
WiFi with OOB interrupt support, as well as UART connected Bluetooth
with its respective interrupts.
PCM support for Bluetooth SCO audio is left out for now. It is connected
to SAI2 in M0 pin mode in case someone needs to enable it.
Note that v1.1 boards used a Realtek based module which is incompatible
with these DT nodes, so v1.1 would need a different overlay.
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20250614-sige5-updates-v2-4-3bb31b02623c@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
ArmSoM Sige5 uses a soldered-on WiFi/BT module with WiFi on SDIO and BT
on UART. However, board v1.1 uses a Realtek based BL-M8852BS2, while
v1.2 uses a Broadcom based BW3752-50B1. They use the same pins and
controllers, but require different DT properties to enable.
Thankfully, the WiFi part at least works without explicitly listing it in
the device tree, albeit without OOB interrupt functionality.
Add required device tree nodes that do not depend on the board version so
that at least the WiFi module can appear on the SDIO bus.
WiFi OOB interrupt and Bluetooth function support are not enabled here, as
they require module specific properties.
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20250614-sige5-updates-v2-3-3bb31b02623c@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
RK3576 has one more SD/MMC controller than are currently listed in its
.dtsi, with the missing one intended as an SDIO controller. Add the
missing node (tested with the onboard WiFi module on ArmSoM Sige5 v1.2)
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20250614-sige5-updates-v2-2-3bb31b02623c@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
