| Age | Commit message (Collapse) | Author |
|---|
|
We are now able to support KVM T&E with MIPS32 guests on some MIPS64r2
and MIPS64r6 hosts, so select HAVE_KVM so it can be enabled.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM sometimes flushes host TLB entries, reading each one to check if it
corresponds to a guest KSeg0 address. In the absence of EntryHi.EHInv
bits to invalidate the whole entry, the entries will be set to unique
virtual addresses in KSeg0 (which is not TLB mapped), spaced 2*PAGE_SIZE
apart.
The TLB read however will clobber the CP0_PageMask register with
whatever page size that TLB entry had, and that same page size will be
written back into the TLB entry along with the unique address.
This would cause breakage when transparent huge pages are enabled on
64-bit host kernels, since huge page entries will overlap other nearby
entries when separated by only 2*PAGE_SIZE, causing a machine check
exception.
Fix this by restoring the old CP0_PageMask value (which should be set to
the normal page size) after reading the TLB entry if we're going to go
ahead and invalidate it.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
kvm_mips_trans_replace() passes a pointer to KVM_GUEST_KSEGX(). This
breaks on 64-bit builds due to the cast of that 64-bit pointer to a
different sized 32-bit int. Cast the pointer argument to an unsigned
long to work around the warning.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When emulating MFC0 instructions to load 32-bit values from guest COP0
registers and the RDHWR instruction to read the CC (Count) register,
sign extend the result to comply with the MIPS64 architecture. The
result must be in canonical 32-bit form or the guest may malfunction.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The MFC0 and MTC0 instructions in the guest which cause traps can be
replaced with 32-bit loads and stores to the commpage, however on big
endian 64-bit builds the offset needs to have 4 added so as to
load/store the least significant half of the long instead of the most
significant half.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Fail if the address of the allocated exception base doesn't fit into the
CP0_EBase register. This can happen on MIPS64 if CP0_EBase.WG isn't
implemented but RAM is available outside of the range of KSeg0.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Update the KVM entry point to write CP0_EBase as a 64-bit register when
it is 64-bits wide, and to set the WG (write gate) bit if it exists in
order to write bits 63:30 (or 31:30 on MIPS32).
Prior to MIPS64r6 it was UNDEFINED to perform a 64-bit read or write of
a 32-bit COP0 register. Since this is dynamically generated code,
generate the right type of access depending on whether the kernel is
64-bit and cpu_has_ebase_wg.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Update the KVM entry code to set the CP0_Entry.KX bit on 64-bit kernels.
This is important to allow the entry code, running in kernel mode, to
access the full 64-bit address space right up to the point of entering
the guest, and immediately after exiting the guest, so it can safely
restore & save the guest context from 64-bit segments.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The MIPS KVM entry code (originally kvm_locore.S, later locore.S, and
now entry.c) has never quite been right when built for 64-bit, using
32-bit instructions when 64-bit instructions were needed for handling
64-bit registers and pointers. Fix several cases of this now.
The changes roughly fall into the following categories.
- COP0 scratch registers contain guest register values and the VCPU
pointer, and are themselves full width. Similarly CP0_EPC and
CP0_BadVAddr registers are full width (even though technically we
don't support 64-bit guest address spaces with trap & emulate KVM).
Use MFC0/MTC0 for accessing them.
- Handling of stack pointers and the VCPU pointer must match the pointer
size of the kernel ABI (always o32 or n64), so use ADDIU.
- The CPU number in thread_info, and the guest_{user,kernel}_asid arrays
in kvm_vcpu_arch are all 32 bit integers, so use lw (instead of LW) to
load them.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There are several unportable uses of CKSEG0ADDR() in MIPS KVM, which
implicitly assume that a host physical address will be in the low 512MB
of the physical address space (accessible in KSeg0). These assumptions
don't hold for highmem or on 64-bit kernels.
When interpreting the guest physical address when reading or overwriting
a trapping instruction, use kmap_atomic() to get a usable virtual
address to access guest memory, which is portable to 64-bit and highmem
kernels.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Calculate the PFN of the commpage using virt_to_phys() instead of
CPHYSADDR(). This is more portable as kzalloc() may allocate from XKPhys
instead of KSeg0 on 64-bit kernels, which CPHYSADDR() doesn't handle.
This is sufficient for highmem kernels too since kzalloc() will allocate
from lowmem in KSeg0.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The KSEGX() macro is defined to 32-bit sign extend the address argument
and logically AND the result with 0xe0000000, with the final result
usually compared against one of the CKSEG macros. However the literal
0xe0000000 is unsigned as the high bit is set, and is therefore
zero-extended on 64-bit kernels, resulting in the sign extension bits of
the argument being masked to zero. This results in the odd situation
where:
KSEGX(CKSEG) != CKSEG
(0xffffffff80000000 & 0x00000000e0000000) != 0xffffffff80000000)
Fix this by 32-bit sign extending the 0xe0000000 literal using
_ACAST32_.
This will help some MIPS KVM code handling 32-bit guest addresses to
work on 64-bit host kernels, but will also affect KSEGX in
dec_kn01_be_backend() on a 64-bit DECstation kernel, and the SiByte DMA
page ops KSEGX check in clear_page() and copy_page() on 64-bit SB1
kernels, neither of which appear to be designed with 64-bit segments in
mind anyway.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree updates from Rob Herring:
- remove most of_platform_populate() calls in arch code. Now the DT
core code calls it in the default case and platforms only need to
call it if they have special needs
- use pr_fmt on all the DT core print statements
- CoreSight binding doc improvements to block name descriptions
- add dt_to_config script which can parse dts files and list
corresponding kernel config options
- fix memory leak hit with a PowerMac DT
- correct a bunch of STMicro compatible strings to use the correct
vendor prefix
- fix DA9052 PMIC binding doc to match what is actually used in dts
files
* tag 'devicetree-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits)
documentation: da9052: Update regulator bindings names to match DA9052/53 DTS expectations
xtensa: Partially Revert "xtensa: Remove unnecessary of_platform_populate with default match table"
xtensa: Fix build error due to missing include file
MIPS: ath79: Add missing include file
Fix spelling errors in Documentation/devicetree
ARM: dts: fix STMicroelectronics compatible strings
powerpc/dts: fix STMicroelectronics compatible strings
Documentation: dt: i2c: use correct STMicroelectronics vendor prefix
scripts/dtc: dt_to_config - kernel config options for a devicetree
of: fdt: mark unflattened tree as detached
of: overlay: add resolver error prints
coresight: document binding acronyms
Documentation/devicetree: document cavium-pip rx-delay/tx-delay properties
of: use pr_fmt prefix for all console printing
of/irq: Mark initialised interrupt controllers as populated
of: fix memory leak related to safe_name()
Revert "of/platform: export of_default_bus_match_table"
of: unittest: use of_platform_default_populate() to populate default bus
memory: omap-gpmc: use of_platform_default_populate() to populate default bus
bus: uniphier-system-bus: use of_platform_default_populate() to populate default bus
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
"Highlights:
- TPM core and driver updates/fixes
- IPv6 security labeling (CALIPSO)
- Lots of Apparmor fixes
- Seccomp: remove 2-phase API, close hole where ptrace can change
syscall #"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (156 commits)
apparmor: fix SECURITY_APPARMOR_HASH_DEFAULT parameter handling
tpm: Add TPM 2.0 support to the Nuvoton i2c driver (NPCT6xx family)
tpm: Factor out common startup code
tpm: use devm_add_action_or_reset
tpm2_i2c_nuvoton: add irq validity check
tpm: read burstcount from TPM_STS in one 32-bit transaction
tpm: fix byte-order for the value read by tpm2_get_tpm_pt
tpm_tis_core: convert max timeouts from msec to jiffies
apparmor: fix arg_size computation for when setprocattr is null terminated
apparmor: fix oops, validate buffer size in apparmor_setprocattr()
apparmor: do not expose kernel stack
apparmor: fix module parameters can be changed after policy is locked
apparmor: fix oops in profile_unpack() when policy_db is not present
apparmor: don't check for vmalloc_addr if kvzalloc() failed
apparmor: add missing id bounds check on dfa verification
apparmor: allow SYS_CAP_RESOURCE to be sufficient to prlimit another task
apparmor: use list_next_entry instead of list_entry_next
apparmor: fix refcount race when finding a child profile
apparmor: fix ref count leak when profile sha1 hash is read
apparmor: check that xindex is in trans_table bounds
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull smp hotplug updates from Thomas Gleixner:
"This is the next part of the hotplug rework.
- Convert all notifiers with a priority assigned
- Convert all CPU_STARTING/DYING notifiers
The final removal of the STARTING/DYING infrastructure will happen
when the merge window closes.
Another 700 hundred line of unpenetrable maze gone :)"
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
timers/core: Correct callback order during CPU hot plug
leds/trigger/cpu: Move from CPU_STARTING to ONLINE level
powerpc/numa: Convert to hotplug state machine
arm/perf: Fix hotplug state machine conversion
irqchip/armada: Avoid unused function warnings
ARC/time: Convert to hotplug state machine
clocksource/atlas7: Convert to hotplug state machine
clocksource/armada-370-xp: Convert to hotplug state machine
clocksource/exynos_mct: Convert to hotplug state machine
clocksource/arm_global_timer: Convert to hotplug state machine
rcu: Convert rcutree to hotplug state machine
KVM/arm/arm64/vgic-new: Convert to hotplug state machine
smp/cfd: Convert core to hotplug state machine
x86/x2apic: Convert to CPU hotplug state machine
profile: Convert to hotplug state machine
timers/core: Convert to hotplug state machine
hrtimer: Convert to hotplug state machine
x86/tboot: Convert to hotplug state machine
arm64/armv8 deprecated: Convert to hotplug state machine
hwtracing/coresight-etm4x: Convert to hotplug state machine
...
|
|
The MIPS Coherence Manager (CM) can propagate address-based ("hit")
cache operations to other cores in the coherent system, alleviating
software of the need to use SMP calls, however indexed cache operations
are not propagated by hardware since doing so makes no sense for
separate caches.
Update r4k_op_needs_ipi() to report that only hit cache operations are
globalized by the CM, requiring indexed cache operations to be
globalized by software via an SMP call.
r4k_on_each_cpu() previously had a special case for CONFIG_MIPS_MT_SMP,
intended to avoid the SMP calls when the only other CPUs in the system
were other VPEs in the same core, and hence sharing the same caches.
This was changed by commit cccf34e9411c ("MIPS: c-r4k: Fix cache
flushing for MT cores") to apparently handle multi-core multi-VPE
systems, but it focussed mainly on hit cache ops, so the SMP calls were
still disabled entirely for CM systems.
This doesn't normally cause problems, but tests can be written to hit
these corner cases by using multiple threads, or changing task
affinities to force the process to migrate cores. For example the
failure of mprotect RW->RX to globally sync icaches (via
flush_cache_range) can be detected by modifying and mprotecting a code
page on one core, and migrating to a different core to execute from it.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13807/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Avoid SMP calls for flushing small icache ranges. On non-CM platforms,
and CM platforms too after we make r4k_on_each_cpu() take the cache op
type into account, it will be called on multiple CPUs due to the
possibility that local_r4k_flush_icache_range_ipi() could do
non-globalized indexed cache ops. This rougly copies the range size
check out into r4k_flush_icache_range(), which can disallow indexed
cache ops and allow r4k_on_each_cpu() to skip the SMP call.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13805/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Allow the permitted cache op types used by
local_r4k_flush_icache_range_ipi() to be overridden by the SMP caller.
This will allow SMP calls to be avoided under certain circumstances,
falling back to a single CPU performing globalized hit cache ops only.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13803/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Split the operation of r4k_flush_kernel_vmap_range() into separate
SMP callbacks for the indexed cache flush and hit cache flush cases,
since the logic to determine which to use can be determined by the
initiating CPU prior to doing any SMP calls.
This will help when we change r4k_on_each_cpu() to distinguish indexed
and hit cache ops in a later patch, preventing globalized hit cache ops
being performed redundantly on multiple CPUs.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13806/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
When performing SMP calls to foreign cores, exclude sibling CPUs from
the provided map, as we already handle the local core on the current
CPU. This prevents an SMP call from for example core 0, VPE 1 to VPE 0
on the same core.
In the process the cpu_foreign_map cpumask is turned into an array of
cpumasks, so that each CPU has its own version of it which excludes
sibling CPUs. r4k_op_needs_ipi() is also updated to reflect that cache
management SMP calls are not needed when all CPUs are siblings (i.e.
there are no foreign CPUs according to the new cpu_foreign_map[]
semantics which exclude siblings).
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: Jayachandran C. <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13801/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Several cache operations are optimised to return early from the SMP call
handler if the memory map in question has no valid ASID on the current
CPU, or any online CPU in the case of MIPS_MT_SMP. The idea is that if a
memory map has never been used on a CPU it shouldn't have cache lines in
need of flushing.
However this doesn't cover all cases when ASIDs for other CPUs need to
be checked:
- Offline VPEs may have recently been online and brought lines into the
(shared) cache, so they should also be checked, rather than only
online CPUs.
- SMP systems with a Coherence Manager (CM), but with MT disabled still
have globalized hit cache ops, but don't use SMP calls, so all present
CPUs should be taken into account.
- R6 systems have a different multithreading implementation, so
MIPS_MT_SMP won't be set, but as above may still have a CM which
globalizes hit cache ops.
Additionally for non-globalized cache operations where an SMP call to a
single VPE in each foreign core is used, it is not necessary to check
every CPU in the system, only sibling CPUs sharing the same first level
cache.
Fix this by making has_valid_asid() take a cache op type argument like
r4k_on_each_cpu(), so it can determine whether r4k_on_each_cpu() will
have done SMP calls to other cores. It can then determine which set of
CPUs to check the ASIDs of based on that, excluding foreign CPUs if an
SMP call will have been performed.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13804/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The r4k_on_each_cpu() function calls the specified cache flush helper on
other CPUs if deemed necessary due to the cache ops not being
globalized by hardware. However this really depends on the cache op
addressing type, as the MIPS Coherence Manager (CM) if present will
globalize "hit" cache ops (addressed by virtual address), but not
"index" cache ops (addressed by cache index). This results in index
cache ops only being performed on a single CPU when CM is present.
Most (but not all) of the functions called by r4k_on_each_cpu() perform
cache operations exclusively with a single cache op type, so add a type
argument and modify the callers to pass in some combination of R4K_HIT
(global kernel virtual addressing or user virtual addressing
conditional upon matching active_mm) and R4K_INDEX (index into cache).
This will allow r4k_on_each_cpu() to later distinguish these cases and
decide whether to perform an SMP call based on it.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13798/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Avoid the dcache and scache flush in local_r4k_flush_cache_sigtramp() if
the icache fills straight from the dcache.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13802/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Fix r4k_flush_cache_sigtramp() and local_r4k_flush_cache_sigtramp() to
flush the delay slot emulation trampoline cacheline through a kmap
rather than directly when the active_mm doesn't match that of the task
initiating the flush, a bit like local_r4k_flush_cache_page() does.
This would fix a corner case on SMP systems without hardware globalized
hit cache ops, where a migration to another CPU after the flush, where
that CPU did not have the same mm active at the time of the flush, could
result in stale icache content being executed instead of the trampoline,
e.g. from a previous delay slot emulation with a similar stack pointer.
This case was artificially triggered by replacing the icache flush with
a full indexed flush (not globalized on CM systems) and forcing the SMP
call to take place, with a test program that alternated two FPU delay
slots with a parent process repeatedly changing scheduler affinity.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13797/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The protected_writeback_scache_line() function is used by
local_r4k_flush_cache_sigtramp() to flush an FPU delay slot emulation
trampoline on the userland stack from the caches so it is visible to
subsequent instruction fetches.
Commit de8974e3f76c ("MIPS: asm: r4kcache: Add EVA cache flushing
functions") updated some protected_ cache flush functions to use EVA
CACHEE instructions via protected_cachee_op(), and commit 83fd43449baa
("MIPS: r4kcache: Add EVA case for protected_writeback_dcache_line") did
the same thing for protected_writeback_dcache_line(), but
protected_writeback_scache_line() never got updated. Lets fix that now
to flush the right user address from the secondary cache rather than
some arbitrary kernel unmapped address.
This issue was spotted through code inspection, and it seems unlikely to
be possible to hit this in practice. It theoretically affect EVA kernels
on EVA capable cores with an L2 cache, where the icache fetches straight
from RAM (cpu_icache_snoops_remote_store == 0), running a hard float
userland with FPU disabled (nofpu). That both Malta and Boston platforms
override cpu_icache_snoops_remote_store to 1 suggests that all MIPS
cores fetch instructions into icache straight from L2 rather than RAM.
Fixes: de8974e3f76c ("MIPS: asm: r4kcache: Add EVA cache flushing functions")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13800/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Commit cccf34e9411c ("MIPS: c-r4k: Fix cache flushing for MT cores")
added the cpu_foreign_map cpumask containing a single VPE from each
online core, and recalculated it when secondary CPUs are brought up.
stop_this_cpu() was also updated to recalculate cpu_foreign_map, but
with an additional hack before marking the CPU as offline to copy
cpu_online_mask into cpu_foreign_map and perform an SMP memory barrier.
This appears to have been intended to prevent cache management IPIs
being missed when the VPE representing the core in cpu_foreign_map is
taken offline while other VPEs remain online. Unfortunately there is
nothing in this hack to prevent r4k_on_each_cpu() from reading the old
cpu_foreign_map, and smp_call_function_many() from reading that new
cpu_online_mask with the core's representative VPE marked offline. It
then wouldn't send an IPI to any online VPEs of that core.
stop_this_cpu() is only actually called in panic and system shutdown /
halt / reboot situations, in which case all CPUs are going down and we
don't really need to care about cache management, so drop this hack.
Note that the __cpu_disable() case for CPU hotplug is handled in the
previous commit, and no synchronisation is needed there due to the use
of stop_machine() which prevents hotplug from taking place while any CPU
has disabled preemption (as r4k_on_each_cpu() does).
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13796/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
When a CPU is disabled via CPU hotplug, cpu_foreign_map is not updated.
This could result in cache management SMP calls being sent to offline
CPUs instead of online siblings in the same core.
Add a call to calculate_cpu_foreign_map() in the various MIPS cpu
disable callbacks after set_cpu_online(). All cases are updated for
consistency and to keep cpu_foreign_map strictly up to date, not just
those which may support hardware multithreading.
Fixes: cccf34e9411c ("MIPS: c-r4k: Fix cache flushing for MT cores")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Hongliang Tao <taohl@lemote.com>
Cc: Hua Yan <yanh@lemote.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13799/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The SMP flush_tlb_*() functions may clear the memory map's ASIDs for
other CPUs if the mm has only a single user (the current CPU) in order
to avoid SMP calls. However this makes it appear to has_valid_asid(),
which is used by various cache flush functions, as if the CPUs have
never run in the mm, and therefore can't have cached any of its memory.
For flush_tlb_mm() this doesn't sound unreasonable.
flush_tlb_range() corresponds to flush_cache_range() which does do full
indexed cache flushes, but only on the icache if the specified mapping
is executable, otherwise it doesn't guarantee that there are no cache
contents left for the mm.
flush_tlb_page() corresponds to flush_cache_page(), which will perform
address based cache ops on the specified page only, and also only
touches the icache if the page is executable. It does not guarantee that
there are no cache contents left for the mm.
For example, this affects flush_cache_range() which uses the
has_valid_asid() optimisation. It is required to flush the icache when
mappings are made executable (e.g. using mprotect) so they are
immediately usable. If some code is changed to non executable in order
to be modified then it will not be flushed from the icache during that
time, but the ASID on other CPUs may still be cleared for TLB flushing.
When the code is changed back to executable, flush_cache_range() will
assume the code hasn't run on those other CPUs due to the zero ASID, and
won't invalidate the icache on them.
This is fixed by clearing the other CPUs ASIDs to 1 instead of 0 for the
above two flush_tlb_*() functions when the corresponding cache flushes
are likely to be incomplete (non executable range flush, or any page
flush). This ASID appears valid to has_valid_asid(), but still triggers
ASID regeneration due to the upper ASID version bits being 0, which is
less than the minimum ASID version of 1 and so always treated as stale.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13795/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
AT_VECTOR_SIZE_ARCH should be defined with the maximum number of
NEW_AUX_ENT entries that ARCH_DLINFO can contain, but it wasn't defined
for MIPS at all even though ARCH_DLINFO will contain one NEW_AUX_ENT for
the VDSO address.
This shouldn't be a problem as AT_VECTOR_SIZE_BASE includes space for
AT_BASE_PLATFORM which MIPS doesn't use, but lets define it now and add
the comment above ARCH_DLINFO as found in several other architectures to
remind future modifiers of ARCH_DLINFO to keep AT_VECTOR_SIZE_ARCH up to
date.
Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-arch@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13823/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
At boot time, do a better job of resetting the USB host controller
to make the frequency "eye" diagram more compliant with the USB
standard while making the controller more reliable.
Signed-off-by: Steven J. Hill <steven.hill@cavium.com>
Acked-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13831/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Set the DMA mask such that all descriptors stay in the
lower 4GB of memory.
Signed-off-by: Steven J. Hill <steven.hill@cavium.com>
Acked-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13830/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Get rid of unnecessary forced interrupt mappings for
the USB host controller on OCTEON II.
Signed-off-by: Steven J. Hill <steven.hill@cavium.com>
Acked-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13824/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
MIPS64 needs to use compat_sys_keyctl for 32-bit userspace rather than
calling sys_keyctl. The latter will work in a lot of cases, thereby hiding
the issue.
Reported-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: stable@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Cc: keyrings@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13832/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Currently the debugfs interface to print the segment configuration
refuses to print the physical address of mapped segments. However if the
EU bit is set these become unmapped at error level (when
CP0_Status.ERL=1), so the physical address is still relevant.
Update the logic to print the physical address of mapped segments when
the EU bit is set, while still hiding the Cache Coherency Attribute
(since EU overrides that to uncached when ERL=1 too).
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13833/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"Quite a lot of cleanup and maintainence work going on this release in
various drivers, and also a fix for a nasty locking issue in the core:
- A fix for locking issues when external drivers explicitly locked
the bus with spi_bus_lock() - we were using the same lock to both
control access to the physical bus in multi-threaded I/O operations
and exclude multiple callers.
Confusion between these two caused us to have scenarios where we
were dropping locks. These are fixed by splitting into two
separate locks like should have been done originally, making
everything much clearer and correct.
- Support for DMA in spi_flash_read().
- Support for instantiating spidev on ACPI systems, including some
test devices used in Windows validation.
- Use of the core DMA mapping functionality in the McSPI driver.
- Start of support for ThunderX SPI controllers, involving a very big
set of changes to the Cavium driver.
- Support for Braswell, Exynos 5433, Kaby Lake, Merrifield, RK3036,
RK3228, RK3368 controllers"
* tag 'spi-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (64 commits)
spi: Split bus and I/O locking
spi: octeon: Split driver into Octeon specific and common parts
spi: octeon: Move include file from arch/mips to drivers/spi
spi: octeon: Put register offsets into a struct
spi: octeon: Store system clock freqency in struct octeon_spi
spi: octeon: Convert driver to use readq()/writeq() functions
spi: pic32-sqi: fixup wait_for_completion_timeout return handling
spi: pic32: fixup wait_for_completion_timeout return handling
spi: rockchip: limit transfers to (64K - 1) bytes
spi: xilinx: Return IRQ_NONE if no interrupts were detected
spi: xilinx: Handle errors from platform_get_irq()
spi: s3c64xx: restore removed comments
spi: s3c64xx: add Exynos5433 compatible for ioclk handling
spi: s3c64xx: use error code from clk_prepare_enable()
spi: s3c64xx: rename goto labels to meaningful names
spi: s3c64xx: document the clocks and the clock-name property
spi: s3c64xx: add exynos5433 spi compatible
spi: s3c64xx: fix reference leak to master in s3c64xx_spi_remove()
spi: spi-sh: Remove deprecated create_singlethread_workqueue
spi: spi-topcliff-pch: Remove deprecated create_singlethread_workqueue
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
"New LED class driver:
- LED driver for TI LP3952 6-Channel Color LED
LED core improvements:
- Only descend into leds directory when CONFIG_NEW_LEDS is set
- Add no-op gpio_led_register_device when LED subsystem is disabled
- MAINTAINERS: Add file patterns for led device tree bindings
LED Trigger core improvements:
- return error if invalid trigger name is provided via sysfs
LED class drivers improvements
- is31fl32xx: define complete i2c_device_id table
- is31fl32xx: fix typo in id and match table names
- leds-gpio: Set of_node for created LED devices
- pca9532: Add device tree support
Conversion of IDE trigger to common disk trigger:
- leds: convert IDE trigger to common disk trigger
- leds: documentation: 'ide-disk' to 'disk-activity'
- unicore32: use the new LED disk activity trigger
- parisc: use the new LED disk activity trigger
- mips: use the new LED disk activity trigger
- arm: use the new LED disk activity trigger
- powerpc: use the new LED disk activity trigger"
* tag 'leds_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
leds: is31fl32xx: define complete i2c_device_id table
leds: is31fl32xx: fix typo in id and match table names
leds: LED driver for TI LP3952 6-Channel Color LED
leds: leds-gpio: Set of_node for created LED devices
leds: triggers: return error if invalid trigger name is provided via sysfs
leds: Only descend into leds directory when CONFIG_NEW_LEDS is set
leds: Add no-op gpio_led_register_device when LED subsystem is disabled
unicore32: use the new LED disk activity trigger
parisc: use the new LED disk activity trigger
mips: use the new LED disk activity trigger
arm: use the new LED disk activity trigger
powerpc: use the new LED disk activity trigger
leds: documentation: 'ide-disk' to 'disk-activity'
leds: convert IDE trigger to common disk trigger
leds: pca9532: Add device tree support
MAINTAINERS: Add file patterns for led device tree bindings
|
|
We always have vma->vm_mm around.
Link: http://lkml.kernel.org/r/1466021202-61880-8-git-send-email-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"This update provides the following changes:
- The rework of the timer wheel which addresses the shortcomings of
the current wheel (cascading, slow search for next expiring timer,
etc). That's the first major change of the wheel in almost 20
years since Finn implemted it.
- A large overhaul of the clocksource drivers init functions to
consolidate the Device Tree initialization
- Some more Y2038 updates
- A capability fix for timerfd
- Yet another clock chip driver
- The usual pile of updates, comment improvements all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (130 commits)
tick/nohz: Optimize nohz idle enter
clockevents: Make clockevents_subsys static
clocksource/drivers/time-armada-370-xp: Fix return value check
timers: Implement optimization for same expiry time in mod_timer()
timers: Split out index calculation
timers: Only wake softirq if necessary
timers: Forward the wheel clock whenever possible
timers/nohz: Remove pointless tick_nohz_kick_tick() function
timers: Optimize collect_expired_timers() for NOHZ
timers: Move __run_timers() function
timers: Remove set_timer_slack() leftovers
timers: Switch to a non-cascading wheel
timers: Reduce the CPU index space to 256k
timers: Give a few structs and members proper names
hlist: Add hlist_is_singular_node() helper
signals: Use hrtimer for sigtimedwait()
timers: Remove the deprecated mod_timer_pinned() API
timers, net/ipv4/inet: Initialize connection request timers as pinned
timers, drivers/tty/mips_ejtag: Initialize the poll timer as pinned
timers, drivers/tty/metag_da: Initialize the poll timer as pinned
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"The locking tree was busier in this cycle than the usual pattern - a
couple of major projects happened to coincide.
The main changes are:
- implement the atomic_fetch_{add,sub,and,or,xor}() API natively
across all SMP architectures (Peter Zijlstra)
- add atomic_fetch_{inc/dec}() as well, using the generic primitives
(Davidlohr Bueso)
- optimize various aspects of rwsems (Jason Low, Davidlohr Bueso,
Waiman Long)
- optimize smp_cond_load_acquire() on arm64 and implement LSE based
atomic{,64}_fetch_{add,sub,and,andnot,or,xor}{,_relaxed,_acquire,_release}()
on arm64 (Will Deacon)
- introduce smp_acquire__after_ctrl_dep() and fix various barrier
mis-uses and bugs (Peter Zijlstra)
- after discovering ancient spin_unlock_wait() barrier bugs in its
implementation and usage, strengthen its semantics and update/fix
usage sites (Peter Zijlstra)
- optimize mutex_trylock() fastpath (Peter Zijlstra)
- ... misc fixes and cleanups"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits)
locking/atomic: Introduce inc/dec variants for the atomic_fetch_$op() API
locking/barriers, arch/arm64: Implement LDXR+WFE based smp_cond_load_acquire()
locking/static_keys: Fix non static symbol Sparse warning
locking/qspinlock: Use __this_cpu_dec() instead of full-blown this_cpu_dec()
locking/atomic, arch/tile: Fix tilepro build
locking/atomic, arch/m68k: Remove comment
locking/atomic, arch/arc: Fix build
locking/Documentation: Clarify limited control-dependency scope
locking/atomic, arch/rwsem: Employ atomic_long_fetch_add()
locking/atomic, arch/qrwlock: Employ atomic_fetch_add_acquire()
locking/atomic, arch/mips: Convert to _relaxed atomics
locking/atomic, arch/alpha: Convert to _relaxed atomics
locking/atomic: Remove the deprecated atomic_{set,clear}_mask() functions
locking/atomic: Remove linux/atomic.h:atomic_fetch_or()
locking/atomic: Implement atomic{,64,_long}_fetch_{add,sub,and,andnot,or,xor}{,_relaxed,_acquire,_release}()
locking/atomic: Fix atomic64_relaxed() bits
locking/atomic, arch/xtensa: Implement atomic_fetch_{add,sub,and,or,xor}()
locking/atomic, arch/x86: Implement atomic{,64}_fetch_{add,sub,and,or,xor}()
locking/atomic, arch/tile: Implement atomic{,64}_fetch_{add,sub,and,or,xor}()
locking/atomic, arch/sparc: Implement atomic{,64}_fetch_{add,sub,and,or,xor}()
...
|
|
Commit ddd0ce87bfde ("mips: Remove unnecessary of_platform_populate with
default match table") dropped the include of linux/clk-provider.h from
arch/mips/ath79/setup.c. This results in the following build error.
arch/mips/ath79/setup.c: In function 'ath79_of_plat_time_init':
arch/mips/ath79/setup.c:232:2: error:
implicit declaration of function 'of_clk_init'
Fixes: ddd0ce87bfde ("mips: Remove unnecessary of_platform_populate with default match table")
Cc: Rob Herring <robh@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Move the register definitions to the drivers directory because they
are only used there.
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Tested-by: Steven J. Hill <steven.hill@cavium.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The expression "uasm_in_compat_space_p(swpd) && !uasm_rel_lo(swpd)" is
used twice in build_get_pgd_vmalloc64(), one of which is assigned to the
local variable single_insn_swpd. Update the other use to just use
single_insn_swpd instead to remove the duplication.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13779/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
uasm_in_compat_space_p() determines whether the given value is in the
32-bit compatibility part of the 64-bit address space, i.e. is in 32-bit
sign-extended form, however it only handles the top half of the value
space (corresponding to the kernel compatibility segments in the upper
half of the address space). Since values < 2^31 (corresponding to the
low 2GiB of the address space) can also be handled using 32-bit
instructions (e.g. a LUI and ADDIU) rather than convoluted 64-bit
immediate generation, rewrite it with a cast to check whether the
address matches its 32-bit sign extended form.
This allows UASM_i_LA to be used to generate arbitrary 32-bit immediates
more efficiently on 64-bit CPUs, i.e. more like the li (load immediate)
pseudo-instruction.
For example this code to load the immediate (ST0_EXL | KSU_USER |
ST0_BEV | ST0_KX) into k0 with UASM_i_LA():
lui k0,0x0
dsll k0,k0,0x10
daddiu k0,k0,64
dsll k0,k0,0x10
daddiu k0,k0,146
Changes to this more efficient version:
lui k0,0x40
addiu k0,k0,146
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13778/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Linux MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/13700/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Building an MSA capable kernel with a toolchain that supports MSA
produces warnings such as this:
CC arch/mips/kernel/cpu-probe.o
{standard input}: Assembler messages:
{standard input}:4786: Warning: the `msa' extension requires 64-bit FPRs
This is due to ".set msa" without ".set fp=64" in the inline assembly of
control register accessors, since MSA requires the 64-bit FPU registers
(FR=1). Add the missing fp=64 in these functions to silence the
warnings.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13554/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The Pistachio SoC does not have an IOCU. Hence, DMA is non-coherent.
Remove the function checking for iocoherency and select
CONFIG_DMA_NONCOHERENT in Kconfig
This code is probably accidentally inherited from Malta.
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Reviewed-by: James Hartley <james.hartley@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13433/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
We used the hardware IRQ number to register the IRQ handler and not the
virtual one. This probably caused some problems because the hardware
IRQ numbers are only unique for each IRQ controller and not in the
system. The virtual IRQ number is managed by Linux and unique in the
system. This was probably the reason there was a gab of 8 IRQ numbers added
before the numbers used for the lantiq IRQ controller. With the current
setup the hardware and the virtual IRQ numbers are the same.
Reported-by: Thomas Langer <thomas.langer@intel.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: John Crispin <john@phrozen.org>
Cc: thomas.langer@intel.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13539/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The Loongson1 added a new instance of ARCH_WANT_OPTIONAL_GPIOLIB
which is no longer required to have GPIOLIB available in
Kconfig. Delete it.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13543/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
We runtime load the available external interrupts into an array and store
the number inside exin_avail. Some of the code however uses MAX_EIU for
looping over the array which may partially be 0. This is a cosmetic fix as
the existing code works as is. It is just nicer to only loop over the array
elements that were actually populated during probe.
Signed-off-by: John Crispin <john@phrozen.org>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/13602/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Using of_irq_count to load the irq index from the devicetree is incorrect.
This will cause the kernel to map them regardless, even if they dont
actually get used. Change the code to use of_property_count_u32_elems()
instead which is the correct API to use in this case.
Signed-off-by: John Crispin <john@phrozen.org>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/13601/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
