| Age | Commit message (Collapse) | Author |
|---|
|
This Kconfig option is used by individual arch to set its desired
MAX_ORDER. Rename it to reflect its actual use.
Link: https://lkml.kernel.org/r/20220815143959.1511278-1-zi.yan@sent.com
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Zi Yan <ziy@nvidia.com>
Acked-by: Guo Ren <guoren@kernel.org> [csky]
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Huacai Chen <chenhuacai@kernel.org> [LoongArch]
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Taichi Sugaya <sugaya.taichi@socionext.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Qin Jian <qinjian@cqplus1.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Zankel <chris@zankel.net>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This idea was introduced by David Rientjes[1].
Introduce a new madvise mode, MADV_COLLAPSE, that allows users to request
a synchronous collapse of memory at their own expense.
The benefits of this approach are:
* CPU is charged to the process that wants to spend the cycles for the
THP
* Avoid unpredictable timing of khugepaged collapse
Semantics
This call is independent of the system-wide THP sysfs settings, but will
fail for memory marked VM_NOHUGEPAGE. If the ranges provided span
multiple VMAs, the semantics of the collapse over each VMA is independent
from the others. This implies a hugepage cannot cross a VMA boundary. If
collapse of a given hugepage-aligned/sized region fails, the operation may
continue to attempt collapsing the remainder of memory specified.
The memory ranges provided must be page-aligned, but are not required to
be hugepage-aligned. If the memory ranges are not hugepage-aligned, the
start/end of the range will be clamped to the first/last hugepage-aligned
address covered by said range. The memory ranges must span at least one
hugepage-sized region.
All non-resident pages covered by the range will first be
swapped/faulted-in, before being internally copied onto a freshly
allocated hugepage. Unmapped pages will have their data directly
initialized to 0 in the new hugepage. However, for every eligible
hugepage aligned/sized region to-be collapsed, at least one page must
currently be backed by memory (a PMD covering the address range must
already exist).
Allocation for the new hugepage may enter direct reclaim and/or
compaction, regardless of VMA flags. When the system has multiple NUMA
nodes, the hugepage will be allocated from the node providing the most
native pages. This operation operates on the current state of the
specified process and makes no persistent changes or guarantees on how
pages will be mapped, constructed, or faulted in the future
Return Value
If all hugepage-sized/aligned regions covered by the provided range were
either successfully collapsed, or were already PMD-mapped THPs, this
operation will be deemed successful. On success, process_madvise(2)
returns the number of bytes advised, and madvise(2) returns 0. Else, -1
is returned and errno is set to indicate the error for the most-recently
attempted hugepage collapse. Note that many failures might have occurred,
since the operation may continue to collapse in the event a single
hugepage-sized/aligned region fails.
ENOMEM Memory allocation failed or VMA not found
EBUSY Memcg charging failed
EAGAIN Required resource temporarily unavailable. Try again
might succeed.
EINVAL Other error: No PMD found, subpage doesn't have Present
bit set, "Special" page no backed by struct page, VMA
incorrectly sized, address not page-aligned, ...
Most notable here is ENOMEM and EBUSY (new to madvise) which are intended
to provide the caller with actionable feedback so they may take an
appropriate fallback measure.
Use Cases
An immediate user of this new functionality are malloc() implementations
that manage memory in hugepage-sized chunks, but sometimes subrelease
memory back to the system in native-sized chunks via MADV_DONTNEED;
zapping the pmd. Later, when the memory is hot, the implementation could
madvise(MADV_COLLAPSE) to re-back the memory by THPs to regain hugepage
coverage and dTLB performance. TCMalloc is such an implementation that
could benefit from this[2].
Only privately-mapped anon memory is supported for now, but additional
support for file, shmem, and HugeTLB high-granularity mappings[2] is
expected. File and tmpfs/shmem support would permit:
* Backing executable text by THPs. Current support provided by
CONFIG_READ_ONLY_THP_FOR_FS may take a long time on a large system which
might impair services from serving at their full rated load after
(re)starting. Tricks like mremap(2)'ing text onto anonymous memory to
immediately realize iTLB performance prevents page sharing and demand
paging, both of which increase steady state memory footprint. With
MADV_COLLAPSE, we get the best of both worlds: Peak upfront performance
and lower RAM footprints.
* Backing guest memory by hugapages after the memory contents have been
migrated in native-page-sized chunks to a new host, in a
userfaultfd-based live-migration stack.
[1] https://lore.kernel.org/linux-mm/d098c392-273a-36a4-1a29-59731cdf5d3d@google.com/
[2] https://github.com/google/tcmalloc/tree/master/tcmalloc
[jrdr.linux@gmail.com: avoid possible memory leak in failure path]
Link: https://lkml.kernel.org/r/20220713024109.62810-1-jrdr.linux@gmail.com
[zokeefe@google.com add missing kfree() to madvise_collapse()]
Link: https://lore.kernel.org/linux-mm/20220713024109.62810-1-jrdr.linux@gmail.com/
Link: https://lkml.kernel.org/r/20220713161851.1879439-1-zokeefe@google.com
[zokeefe@google.com: delay computation of hpage boundaries until use]]
Link: https://lkml.kernel.org/r/20220720140603.1958773-4-zokeefe@google.com
Link: https://lkml.kernel.org/r/20220706235936.2197195-10-zokeefe@google.com
Signed-off-by: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: "Souptick Joarder (HPE)" <jrdr.linux@gmail.com>
Suggested-by: David Rientjes <rientjes@google.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Chris Kennelly <ckennelly@google.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rongwei Wang <rongwei.wang@linux.alibaba.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fix for loongson32 starup hang
- fix for octeon irq setup problem
- fix compiler warning for new CONFIG option
- switch to SPARSEMEM_EXTREME for all platforms selecting SPARSEMEM
* tag 'mips-fixes_6.0_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mips: Select SPARSEMEM_EXTREME
MIPS: OCTEON: irq: Fix octeon_irq_force_ciu_mapping()
MIPS: octeon: Get rid of preprocessor directives around RESERVE32
MIPS: loongson32: ls1c: Fix hang during startup
|
|
Commit c46173183657 ("MIPS: Add NUMA support for Loongson-3") has increased
.bss size of the Octeon kernel from 16k to 16M. Providing the conditions
for SPARSEMEM_EXTREME avoids the waste of memory.
Thomas has tested the loogsoon64 kernel, where .bss is being reduced by
this patch from 16.5M to 515k.
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
All non-UAPI asm/termios.h consist of include of UAPI counterpart
and, possibly, include of linux/uaccess.h
The latter can't be simply removed, even though nothing in
linux/termios.h doesn't depend upon it anymore - there are several
places that rely upon that indirect chain of includes to pull
linux/uaccess.h. So the include needs to be lifted out of there -
we lift into tty_driver.h, serdev.h and places that pull asm/termios.h,
but none of
* linux/uaccess.h (obvious)
* net/sock.h (pulls uaccess.h)
* linux/{tty,tty_driver,serdev}.h (tty.h pulls tty_driver.h)
That leaves us just with the include of UAPI asm/termios.h, which is
what <asm/termios.h> will resolve to if we simply remove non-UAPI header.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/YxDnKvYCHn/ogBUv@ZenIV
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
turn it into an array initializer; then alpha, mips and powerpc
variants fold into it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/YxDm7M6M91gC2RPL@ZenIV
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On old systems it used to be ^O. Linux had never actually used
the value, but INIT_C_CC (on i386) did initialize it to ^O;
unfortunately, it had a typo in the comment claiming that to be
^U. Most of the architectures copied the (correct) definition
along with mistaken comment. alpha, powerpc and sparc tried
to make the definition match comment.
However, util-linux still resets it to ^O on any architecture,
^O is the historical value, kernel ignores it anyway and finally,
Linus said "Just change everybody to do the same, nobody cares
about VDISCARD".
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/YxDmy//MKzs3ye7l@ZenIV
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
* new header (linut/termios_internal.h), pulled by the users of those
suckers
* defaults for INIT_C_CC and externs for conversion helpers moved over
there
* remove termios-base.h (empty now)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/YxDmptU7dNGZ+/Hn@ZenIV
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
default go into drivers/tty/tty_ioctl.c, unusual - into
arch/*/kernel/termios.c (only alpha and sparc have those).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/YxDmeUBHo0s/Ew8b@ZenIV
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For irq_domain_associate() to work the virq descriptor has to be
pre-allocated in advance. Otherwise the following happens:
WARNING: CPU: 0 PID: 0 at .../kernel/irq/irqdomain.c:527 irq_domain_associate+0x298/0x2e8
error: virq128 is not allocated
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.78-... #1
...
Call Trace:
[<ffffffff801344c4>] show_stack+0x9c/0x130
[<ffffffff80769550>] dump_stack+0x90/0xd0
[<ffffffff801576d0>] __warn+0x118/0x130
[<ffffffff80157734>] warn_slowpath_fmt+0x4c/0x70
[<ffffffff801b83c0>] irq_domain_associate+0x298/0x2e8
[<ffffffff80a43bb8>] octeon_irq_init_ciu+0x4c8/0x53c
[<ffffffff80a76cbc>] of_irq_init+0x1e0/0x388
[<ffffffff80a452cc>] init_IRQ+0x4c/0xf4
[<ffffffff80a3cc00>] start_kernel+0x404/0x698
Use irq_alloc_desc_at() to avoid the above problem.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Some of them were pointless because CONFIG_CAVIUM_RESERVE32 is now always
defined, some were not enough (Yu Zhao reported
"Failed to allocate CAVIUM_RESERVE32 memory area" error).
Removing the directives allows for compiler coverage of RESERVE32 code and
replacing one of [always-true] "ifdef" with a compiler conditional fixes
the [cosmetic] error message.
Fixes: 3e3114ac460e ("MIPS: Introduce CAVIUM_RESERVE32 Kconfig option")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-09-05
The following pull-request contains BPF updates for your *net-next* tree.
We've added 106 non-merge commits during the last 18 day(s) which contain
a total of 159 files changed, 5225 insertions(+), 1358 deletions(-).
There are two small merge conflicts, resolve them as follows:
1) tools/testing/selftests/bpf/DENYLIST.s390x
Commit 27e23836ce22 ("selftests/bpf: Add lru_bug to s390x deny list") in
bpf tree was needed to get BPF CI green on s390x, but it conflicted with
newly added tests on bpf-next. Resolve by adding both hunks, result:
[...]
lru_bug # prog 'printk': failed to auto-attach: -524
setget_sockopt # attach unexpected error: -524 (trampoline)
cb_refs # expected error message unexpected error: -524 (trampoline)
cgroup_hierarchical_stats # JIT does not support calling kernel function (kfunc)
htab_update # failed to attach: ERROR: strerror_r(-524)=22 (trampoline)
[...]
2) net/core/filter.c
Commit 1227c1771dd2 ("net: Fix data-races around sysctl_[rw]mem_(max|default).")
from net tree conflicts with commit 29003875bd5b ("bpf: Change bpf_setsockopt(SOL_SOCKET)
to reuse sk_setsockopt()") from bpf-next tree. Take the code as it is from
bpf-next tree, result:
[...]
if (getopt) {
if (optname == SO_BINDTODEVICE)
return -EINVAL;
return sk_getsockopt(sk, SOL_SOCKET, optname,
KERNEL_SOCKPTR(optval),
KERNEL_SOCKPTR(optlen));
}
return sk_setsockopt(sk, SOL_SOCKET, optname,
KERNEL_SOCKPTR(optval), *optlen);
[...]
The main changes are:
1) Add any-context BPF specific memory allocator which is useful in particular for BPF
tracing with bonus of performance equal to full prealloc, from Alexei Starovoitov.
2) Big batch to remove duplicated code from bpf_{get,set}sockopt() helpers as an effort
to reuse the existing core socket code as much as possible, from Martin KaFai Lau.
3) Extend BPF flow dissector for BPF programs to just augment the in-kernel dissector
with custom logic. In other words, allow for partial replacement, from Shmulik Ladkani.
4) Add a new cgroup iterator to BPF with different traversal options, from Hao Luo.
5) Support for BPF to collect hierarchical cgroup statistics efficiently through BPF
integration with the rstat framework, from Yosry Ahmed.
6) Support bpf_{g,s}et_retval() under more BPF cgroup hooks, from Stanislav Fomichev.
7) BPF hash table and local storages fixes under fully preemptible kernel, from Hou Tao.
8) Add various improvements to BPF selftests and libbpf for compilation with gcc BPF
backend, from James Hilliard.
9) Fix verifier helper permissions and reference state management for synchronous
callbacks, from Kumar Kartikeya Dwivedi.
10) Add support for BPF selftest's xskxceiver to also be used against real devices that
support MAC loopback, from Maciej Fijalkowski.
11) Various fixes to the bpf-helpers(7) man page generation script, from Quentin Monnet.
12) Document BPF verifier's tnum_in(tnum_range(), ...) gotchas, from Shung-Hsi Yu.
13) Various minor misc improvements all over the place.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (106 commits)
bpf: Optimize rcu_barrier usage between hash map and bpf_mem_alloc.
bpf: Remove usage of kmem_cache from bpf_mem_cache.
bpf: Remove prealloc-only restriction for sleepable bpf programs.
bpf: Prepare bpf_mem_alloc to be used by sleepable bpf programs.
bpf: Remove tracing program restriction on map types
bpf: Convert percpu hash map to per-cpu bpf_mem_alloc.
bpf: Add percpu allocation support to bpf_mem_alloc.
bpf: Batch call_rcu callbacks instead of SLAB_TYPESAFE_BY_RCU.
bpf: Adjust low/high watermarks in bpf_mem_cache
bpf: Optimize call_rcu in non-preallocated hash map.
bpf: Optimize element count in non-preallocated hash map.
bpf: Relax the requirement to use preallocated hash maps in tracing progs.
samples/bpf: Reduce syscall overhead in map_perf_test.
selftests/bpf: Improve test coverage of test_maps
bpf: Convert hash map to bpf_mem_alloc.
bpf: Introduce any context BPF specific memory allocator.
selftest/bpf: Add test for bpf_getsockopt()
bpf: Change bpf_getsockopt(SOL_IPV6) to reuse do_ipv6_getsockopt()
bpf: Change bpf_getsockopt(SOL_IP) to reuse do_ip_getsockopt()
bpf: Change bpf_getsockopt(SOL_TCP) to reuse do_tcp_getsockopt()
...
====================
Link: https://lore.kernel.org/r/20220905161136.9150-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
MAX_TAIL_CALL_CNT is 33, so min(MAX_TAIL_CALL_CNT, 0xffff) is always
MAX_TAIL_CALL_CNT, it is better to use MAX_TAIL_CALL_CNT directly.
At the same time, add BUILD_BUG_ON(MAX_TAIL_CALL_CNT > 0xffff) with a
comment on why the assertion is there.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Suggested-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1661742309-2320-1-git-send-email-yangtiezhu@loongson.cn
|
|
The RTCCTRL reg of LS1C is obselete.
Writing this reg will cause system hang.
Fixes: 60219c563c9b6 ("MIPS: Add RTC support for Loongson1C board")
Signed-off-by: Yang Ling <gnaygnil@gmail.com>
Tested-by: Keguang Zhang <keguang.zhang@gmail.com>
Acked-by: Keguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Shorten menu titles and make them consistent:
- acronym
- name
- architecture features in parenthesis
- no suffixes like "<something> algorithm", "support", or
"hardware acceleration", or "optimized"
Simplify help text descriptions, update references, and ensure that
https references are still valid.
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Shorten menu titles and make them consistent:
- acronym
- name
- architecture features in parenthesis
- no suffixes like "<something> algorithm", "support", or
"hardware acceleration", or "optimized"
Simplify help text descriptions, update references, and ensure that
https references are still valid.
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Shorten menu titles and make them consistent:
- acronym
- name
- architecture features in parenthesis
- no suffixes like "<something> algorithm", "support", or
"hardware acceleration", or "optimized"
Simplify help text descriptions, update references, and ensure that
https references are still valid.
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Move CPU-specific crypto/Kconfig entries to arch/xxx/crypto/Kconfig
and create a submenu for them under the Crypto API menu.
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
drivers/net/ethernet/mellanox/mlx5/core/en_fs.c
21234e3a84c7 ("net/mlx5e: Fix use after free in mlx5e_fs_init()")
c7eafc5ed068 ("net/mlx5e: Convert ethtool_steering member of flow_steering struct to pointer")
https://lore.kernel.org/all/20220825104410.67d4709c@canb.auug.org.au/
https://lore.kernel.org/all/20220823055533.334471-1-saeed@kernel.org/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
DECnet is an obsolete network protocol that receives more attention
from kernel janitors than users. It belongs in computer protocol
history museum not in Linux kernel.
It has been "Orphaned" in kernel since 2010. The iproute2 support
for DECnet was dropped in 5.0 release. The documentation link on
Sourceforge says it is abandoned there as well.
Leave the UAPI alone to keep userspace programs compiling.
This means that there is still an empty neighbour table
for AF_DECNET.
The table of /proc/sys/net entries was updated to match
current directories and reformatted to be alphabetical.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David Ahern <dsahern@kernel.org>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The motivation of this renaming is to make these variables and related
helper functions less mmu_notifier bound and can also be used for non
mmu_notifier based page invalidation. mmu_invalidate_* was chosen to
better describe the purpose of 'invalidating' a page that those
variables are used for.
- mmu_notifier_seq/range_start/range_end are renamed to
mmu_invalidate_seq/range_start/range_end.
- mmu_notifier_retry{_hva} helper functions are renamed to
mmu_invalidate_retry{_hva}.
- mmu_notifier_count is renamed to mmu_invalidate_in_progress to
avoid confusion with mn_active_invalidate_count.
- While here, also update kvm_inc/dec_notifier_count() to
kvm_mmu_invalidate_begin/end() to match the change for
mmu_notifier_count.
No functional change intended.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Message-Id: <20220816125322.1110439-3-chao.p.peng@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM_PRIVATE_MEM_SLOTS defaults to zero, so it is not necessary to
define it in MIPS's asm/kvm_host.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of tty and serial driver changes for 6.0-rc1.
It was delayed from last week as I wanted to make sure the last commit
here got some good testing in linux-next and elsewhere as it seemed to
show up only late in testing for some reason.
Nothing major here, just lots of cleanups from Jiri and Ilpo to make
the tty core cleaner (Jiri) and the rs485 code simpler to use (Ilpo).
Also included in here is the obligatory n_gsm updates from Daniel
Starke and lots of tiny driver updates and minor fixes and tweaks for
other smaller serial drivers.
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits)
tty: serial: qcom-geni-serial: Fix %lu -> %u in print statements
tty: amiserial: Fix comment typo
tty: serial: document uart_get_console()
tty: serial: serial_core, reformat kernel-doc for functions
Documentation: serial: link uart_ops properly
Documentation: serial: move GPIO kernel-doc to the functions
Documentation: serial: dedup kernel-doc for uart functions
Documentation: serial: move uart_ops documentation to the struct
dt-bindings: serial: snps-dw-apb-uart: Document Rockchip RV1126
serial: mvebu-uart: uart2 error bits clearing
tty: serial: fsl_lpuart: correct the count of break characters
serial: stm32: make info structs static to avoid sparse warnings
serial: fsl_lpuart: zero out parity bit in CS7 mode
tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
serial: 8250_bcm2835aux: Add missing clk_disable_unprepare()
tty: vt: initialize unicode screen buffer
serial: remove VR41XX serial driver
serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags
serial: 8250_dwlib: remove redundant sanity check for RS485 flags
dt_bindings: rs485: Correct delay values
...
|
|
Pull MIPS updates from Thomas Bogendoerfer:
- added support for Netgear WNR3500L v2
- removed support for VR41xx SoC and platforms based on it
- cleanups and fixes
* tag 'mips_6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (25 commits)
MIPS: tlbex: Explicitly compare _PAGE_NO_EXEC against 0
Revert "MIPS: octeon: Remove vestiges of CONFIG_CAVIUM_RESERVE32"
MIPS: Introduce CAVIUM_RESERVE32 Kconfig option
MIPS: msi-octeon: eliminate kernel-doc warnings
MIPS: Fix comment typo
MIPS: BMIPS: Utilize cfe_die() for invalid DTB
MIPS: CFE: Add cfe_die()
MIPS: Fixed __debug_virt_addr_valid()
MIPS: BCM47XX: Add support for Netgear WNR3500L v2
MIPS: Remove VR41xx support
MIPS: dts: align gpio-key node names with dtschema
MIPS: dts: correct gpio-keys names and properties
MIPS: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
MIPS: Make phys_to_virt utilize __va()
MIPS: vdso: Utilize __pa() for gic_pfn
MIPS: mm: Use the bitmap API to allocate bitmaps
MIPS: math-emu: Use the bitmap API to allocate bitmaps
MIPS: Loongson64: Fix section mismatch warning
mips: cavium-octeon: Fix missing of_node_put() in octeon2_usb_clocks_start
MIPS: mscc: ocelot: enable FDMA usage
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Most of the MM queue. A few things are still pending.
Liam's maple tree rework didn't make it. This has resulted in a few
other minor patch series being held over for next time.
Multi-gen LRU still isn't merged as we were waiting for mapletree to
stabilize. The current plan is to merge MGLRU into -mm soon and to
later reintroduce mapletree, with a view to hopefully getting both
into 6.1-rc1.
Summary:
- The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve
latency and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place"
[ XFS merge from hell as per Darrick Wong in
https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ]
* tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits)
tools/testing/selftests/vm/hmm-tests.c: fix build
mm: Kconfig: fix typo
mm: memory-failure: convert to pr_fmt()
mm: use is_zone_movable_page() helper
hugetlbfs: fix inaccurate comment in hugetlbfs_statfs()
hugetlbfs: cleanup some comments in inode.c
hugetlbfs: remove unneeded header file
hugetlbfs: remove unneeded hugetlbfs_ops forward declaration
hugetlbfs: use helper macro SZ_1{K,M}
mm: cleanup is_highmem()
mm/hmm: add a test for cross device private faults
selftests: add soft-dirty into run_vmtests.sh
selftests: soft-dirty: add test for mprotect
mm/mprotect: fix soft-dirty check in can_change_pte_writable()
mm: memcontrol: fix potential oom_lock recursion deadlock
mm/gup.c: fix formatting in check_and_migrate_movable_page()
xfs: fail dax mount if reflink is enabled on a partition
mm/memcontrol.c: remove the redundant updating of stats_flush_threshold
userfaultfd: don't fail on unrecognized features
hugetlb_cgroup: fix wrong hugetlb cgroup numa stat
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are three independent sets of changes:
- Sai Prakash Ranjan adds tracing support to the asm-generic version
of the MMIO accessors, which is intended to help understand
problems with device drivers and has been part of Qualcomm's vendor
kernels for many years
- A patch from Sebastian Siewior to rework the handling of IRQ stacks
in softirqs across architectures, which is needed for enabling
PREEMPT_RT
- The last patch to remove the CONFIG_VIRT_TO_BUS option and some of
the code behind that, after the last users of this old interface
made it in through the netdev, scsi, media and staging trees"
* tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
uapi: asm-generic: fcntl: Fix typo 'the the' in comment
arch/*/: remove CONFIG_VIRT_TO_BUS
soc: qcom: geni: Disable MMIO tracing for GENI SE
serial: qcom_geni_serial: Disable MMIO tracing for geni serial
asm-generic/io: Add logging support for MMIO accessors
KVM: arm64: Add a flag to disable MMIO trace for nVHE KVM
lib: Add register read/write tracing support
drm/meson: Fix overflow implicit truncation warnings
irqchip/tegra: Fix overflow implicit truncation warnings
coresight: etm4x: Use asm-generic IO memory barriers
arm64: io: Use asm-generic high level MMIO accessors
arch/*: Disable softirq stacks on PREEMPT_RT.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Consolidate duplicated 'next function' scanning and extend to allow
'isolated functions' on s390, similar to existing hypervisors
(Niklas Schnelle)
Resource management:
- Implement pci_iobar_pfn() for sparc, which allows us to remove the
sparc-specific pci_mmap_page_range() and pci_mmap_resource_range().
This removes the ability to map the entire PCI I/O space using
/proc/bus/pci, but we believe that's already been broken since
v2.6.28 (Arnd Bergmann)
- Move common PCI definitions to asm-generic/pci.h and rework others
to be be more specific and more encapsulated in arches that need
them (Stafford Horne)
Power management:
- Convert drivers to new *_PM_OPS macros to avoid need for '#ifdef
CONFIG_PM_SLEEP' or '__maybe_unused' (Bjorn Helgaas)
Virtualization:
- Add ACS quirk for Broadcom BCM5750x multifunction NICs that isolate
the functions but don't advertise an ACS capability (Pavan Chebbi)
Error handling:
- Clear PCI Status register during enumeration in case firmware left
errors logged (Kai-Heng Feng)
- When we have native control of AER, enable error reporting for all
devices that support AER. Previously only a few drivers enabled
this (Stefan Roese)
- Keep AER error reporting enabled for switches. Previously we
enabled this during enumeration but immediately disabled it (Stefan
Roese)
- Iterate over error counters instead of error strings to avoid
printing junk in AER sysfs counters (Mohamed Khalfella)
ASPM:
- Remove pcie_aspm_pm_state_change() so ASPM config changes, e.g.,
via sysfs, are not lost across power state changes (Kai-Heng Feng)
Endpoint framework:
- Don't stop an EPC when unbinding an EPF from it (Shunsuke Mie)
Endpoint embedded DMA controller driver:
- Simplify and clean up support for the DesignWare embedded DMA
(eDMA) controller (Frank Li, Serge Semin)
Broadcom STB PCIe controller driver:
- Avoid config space accesses when link is down because we can't
recover from the CPU aborts these cause (Jim Quinlan)
- Look for power regulators described under Root Ports in DT and
enable them before scanning the secondary bus (Jim Quinlan)
- Disable/enable regulators in suspend/resume (Jim Quinlan)
Freescale i.MX6 PCIe controller driver:
- Simplify and clean up clock and PHY management (Richard Zhu)
- Disable/enable regulators in suspend/resume (Richard Zhu)
- Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu)
- Allow speeds faster than Gen2 (Richard Zhu)
- Make link being down a non-fatal error so controller probe doesn't
fail if there are no Endpoints connected (Richard Zhu)
Loongson PCIe controller driver:
- Add ACPI and MCFG support for Loongson LS7A (Huacai Chen)
- Avoid config reads to non-existent LS2K/LS7A devices because a
hardware defect causes machine hangs (Huacai Chen)
- Work around LS7A integrated devices that report incorrect Interrupt
Pin values (Jianmin Lv)
Marvell Aardvark PCIe controller driver:
- Add support for AER and Slot capability on emulated bridge (Pali
Rohár)
MediaTek PCIe controller driver:
- Add Airoha EN7532 to DT binding (John Crispin)
- Allow building of driver for ARCH_AIROHA (Felix Fietkau)
MediaTek PCIe Gen3 controller driver:
- Print decoded LTSSM state when the link doesn't come up (Jianjun
Wang)
NVIDIA Tegra194 PCIe controller driver:
- Convert DT binding to json-schema (Vidya Sagar)
- Add DT bindings and driver support for Tegra234 Root Port and
Endpoint mode (Vidya Sagar)
- Fix some Root Port interrupt handling issues (Vidya Sagar)
- Set default Max Payload Size to 256 bytes (Vidya Sagar)
- Fix Data Link Feature capability programming (Vidya Sagar)
- Extend Endpoint mode support to devices beyond Controller-5 (Vidya
Sagar)
Qualcomm PCIe controller driver:
- Rework clock, reset, PHY power-on ordering to avoid hangs and
improve consistency (Robert Marko, Christian Marangi)
- Move pipe_clk handling to PHY drivers (Dmitry Baryshkov)
- Add IPQ60xx support (Selvam Sathappan Periakaruppan)
- Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru)
- Add support for more than 32 MSI interrupts (Dmitry Baryshkov)
Renesas R-Car PCIe controller driver:
- Convert DT binding to json-schema (Herve Codina)
- Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding and driver
(Herve Codina)
Samsung Exynos PCIe controller driver:
- Fix phy-exynos-pcie driver so it follows the 'phy_init() before
phy_power_on()' PHY programming model (Marek Szyprowski)
Synopsys DesignWare PCIe controller driver:
- Simplify and clean up the DWC core extensively (Serge Semin)
- Fix an issue with programming the ATU for regions that cross a 4GB
boundary (Serge Semin)
- Enable the CDM check if 'snps,enable-cdm-check' exists; previously
we skipped it if 'num-lanes' was absent (Serge Semin)
- Allocate a 32-bit DMA-able page to be MSI target instead of using a
driver data structure that may not be addressable with 32-bit
address (Will McVicker)
- Add DWC core support for more than 32 MSI interrupts (Dmitry
Baryshkov)
Xilinx Versal CPM PCIe controller driver:
- Add DT binding and driver support for Versal CPM5 Gen5 Root Port
(Bharat Kumar Gogada)"
* tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (150 commits)
PCI: imx6: Support more than Gen2 speed link mode
PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers
PCI: imx6: Reformat suspend callback to keep symmetric with resume
PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier
PCI: imx6: Disable clocks in reverse order of enable
PCI: imx6: Do not hide PHY driver callbacks and refine the error handling
PCI: imx6: Reduce resume time by only starting link if it was up before suspend
PCI: imx6: Mark the link down as non-fatal error
PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset()
PCI: imx6: Turn off regulator when system is in suspend mode
PCI: imx6: Call host init function directly in resume
PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks
PCI: imx6: Propagate .host_init() errors to caller
PCI: imx6: Collect clock enables in imx6_pcie_clk_enable()
PCI: imx6: Factor out ref clock disable to match enable
PCI: imx6: Move imx6_pcie_clk_disable() earlier
PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier
PCI: imx6: Move PHY management functions together
PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier
PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of Thunderbolt and USB changes for 6.0-rc1.
Lots of little things here, nothing major, just constant development
on some new hardware support and cleanups of older drivers. Highlights
are:
- lots of typec changes and improvements for new hardware
- new gadget controller driver
- thunderbolt support for new hardware
- the normal set of new usb-serial device ids and cleanups
- loads of dwc3 controller fixes and improvements
- mtu3 driver updates
- testusb fixes for longtime issues (not many people use this tool it
seems.)
- minor driver fixes and improvements over the USB tree
- chromeos platform driver changes were added and then reverted as
they depened on some typec changes, but the cross-tree merges
caused problems so they will come back later through the platform
tree.
All of these have been in linux-next for a while now with no reported
issues"
* tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (193 commits)
usb: misc: onboard_usb_hub: Remove duplicated power_on delay
usb: misc: onboard_usb_hub: Add TI USB8041 hub support
usb: misc: onboard_usb_hub: Add reset-gpio support
USB: usbsevseg: convert sysfs snprintf to sysfs_emit
dt-bindings: usb: Add binding for TI USB8041 hub controller
ARM: multi_v7_defconfig: enable USB onboard HUB driver
ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp15xx-dkx
usb: misc: onboard-hub: add support for Microchip USB2514B USB 2.0 hub
dt-bindings: usb: generic-ehci: allow usb-hcd schema properties
usb: typec: ucsi: stm32g0: add bootloader support
usb: typec: ucsi: stm32g0: add support for stm32g0 controller
dt-bindings: usb: typec: add bindings for stm32g0 controller
usb: typec: ucsi: Acknowledge the GET_ERROR_STATUS command completion
usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable()
usb/chipidea: fix repeated words in comments
usb: renesas-xhci: Do not print any log while fw verif success
usb: typec: retimer: Add missing id check in match callback
USB: xhci: Fix comment typo
usb/typec/tcpm: fix repeated words in comments
usb/musb: fix repeated words in comments
...
|
|
When CONFIG_XPA is enabled, Clang warns:
arch/mips/mm/tlbex.c:629:24: error: converting the result of '<<' to a boolean; did you mean '(1 << _PAGE_NO_EXEC_SHIFT) != 0'? [-Werror,-Wint-in-bool-context]
if (cpu_has_rixi && !!_PAGE_NO_EXEC) {
^
arch/mips/include/asm/pgtable-bits.h:174:28: note: expanded from macro '_PAGE_NO_EXEC'
# define _PAGE_NO_EXEC (1 << _PAGE_NO_EXEC_SHIFT)
^
arch/mips/mm/tlbex.c:2568:24: error: converting the result of '<<' to a boolean; did you mean '(1 << _PAGE_NO_EXEC_SHIFT) != 0'? [-Werror,-Wint-in-bool-context]
if (!cpu_has_rixi || !_PAGE_NO_EXEC) {
^
arch/mips/include/asm/pgtable-bits.h:174:28: note: expanded from macro '_PAGE_NO_EXEC'
# define _PAGE_NO_EXEC (1 << _PAGE_NO_EXEC_SHIFT)
^
2 errors generated.
_PAGE_NO_EXEC can be '0' or '1 << _PAGE_NO_EXEC_SHIFT' depending on the
build and runtime configuration, which is what the negation operators
are trying to convey. To silence the warning, explicitly compare against
0 so the result of the '<<' operator is not implicitly converted to a
boolean.
According to its documentation, GCC enables -Wint-in-bool-context with
-Wall but this warning is not visible when building the same
configuration with GCC. It appears GCC only warns when compiling C++,
not C, although the documentation makes no note of this:
https://godbolt.org/z/x39q3brxf
Reported-by: Sudip Mukherjee (Codethink) <sudipm.mukherjee@gmail.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull uapi flexible array update from Gustavo Silva:
"A treewide patch that replaces zero-length arrays with flexible-array
members in UAPI. This has been baking in linux-next for 5 weeks now.
'-fstrict-flex-arrays=3' is coming and we need to land these changes
to prevent issues like these in the short future:
fs/minix/dir.c:337:3: warning: 'strcpy' will always overflow; destination buffer has size 0, but the source string has length 2 (including NUL byte) [-Wfortify-source]
strcpy(de3->name, ".");
^
Since these are all [0] to [] changes, the risk to UAPI is nearly
zero. If this breaks anything, we can use a union with a new member
name"
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836
* tag 'flexible-array-transformations-UAPI-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
treewide: uapi: Replace zero-length arrays with flexible-array members
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Documentation updates
- Miscellaneous fixes
- Callback-offload updates, perhaps most notably a new
RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to be
offloaded at boot time, regardless of kernel boot parameters.
This is useful to battery-powered systems such as ChromeOS and
Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel boot
parameter prevents offloaded callbacks from interfering with
real-time workloads and with energy-efficiency mechanisms
- Polled grace-period updates, perhaps most notably making these APIs
account for both normal and expedited grace periods
- Tasks RCU updates, perhaps most notably reducing the CPU overhead of
RCU tasks trace grace periods by more than a factor of two on a
system with 15,000 tasks.
The reduction is expected to increase with the number of tasks, so it
seems reasonable to hypothesize that a system with 150,000 tasks
might see a 20-fold reduction in CPU overhead
- Torture-test updates
- Updates that merge RCU's dyntick-idle tracking into context tracking,
thus reducing the overhead of transitioning to kernel mode from
either idle or nohz_full userspace execution for kernels that track
context independently of RCU.
This is expected to be helpful primarily for kernels built with
CONFIG_NO_HZ_FULL=y
* tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (98 commits)
rcu: Add irqs-disabled indicator to expedited RCU CPU stall warnings
rcu: Diagnose extended sync_rcu_do_polled_gp() loops
rcu: Put panic_on_rcu_stall() after expedited RCU CPU stall warnings
rcutorture: Test polled expedited grace-period primitives
rcu: Add polled expedited grace-period primitives
rcutorture: Verify that polled GP API sees synchronous grace periods
rcu: Make Tiny RCU grace periods visible to polled APIs
rcu: Make polled grace-period API account for expedited grace periods
rcu: Switch polled grace-period APIs to ->gp_seq_polled
rcu/nocb: Avoid polling when my_rdp->nocb_head_rdp list is empty
rcu/nocb: Add option to opt rcuo kthreads out of RT priority
rcu: Add nocb_cb_kthread check to rcu_is_callbacks_kthread()
rcu/nocb: Add an option to offload all CPUs on boot
rcu/nocb: Fix NOCB kthreads spawn failure with rcu_nocb_rdp_deoffload() direct call
rcu/nocb: Invert rcu_state.barrier_mutex VS hotplug lock locking order
rcu/nocb: Add/del rdp to iterate from rcuog itself
rcu/tree: Add comment to describe GP-done condition in fqs loop
rcu: Initialize first_gp_fqs at declaration in rcu_gp_fqs()
rcu/kvfree: Remove useless monitor_todo flag
rcu: Cleanup RCU urgency state for offline CPU
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for interrupt core and drivers:
Core:
- Fix a few inconsistencies between UP and SMP vs interrupt
affinities
- Small updates and cleanups all over the place
New drivers:
- LoongArch interrupt controller
- Renesas RZ/G2L interrupt controller
Updates:
- Hotpath optimization for SiFive PLIC
- Workaround for broken PLIC edge triggered interrupts
- Simall cleanups and improvements as usual"
* tag 'irq-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
irqchip/mmp: Declare init functions in common header file
irqchip/mips-gic: Check the return value of ioremap() in gic_of_init()
genirq: Use for_each_action_of_desc in actions_show()
irqchip / ACPI: Introduce ACPI_IRQ_MODEL_LPIC for LoongArch
irqchip: Add LoongArch CPU interrupt controller support
irqchip: Add Loongson Extended I/O interrupt controller support
irqchip/loongson-liointc: Add ACPI init support
irqchip/loongson-pch-msi: Add ACPI init support
irqchip/loongson-pch-pic: Add ACPI init support
irqchip: Add Loongson PCH LPC controller support
LoongArch: Prepare to support multiple pch-pic and pch-msi irqdomain
LoongArch: Use ACPI_GENERIC_GSI for gsi handling
genirq/generic_chip: Export irq_unmap_generic_chip
ACPI: irq: Allow acpi_gsi_to_irq() to have an arch-specific fallback
APCI: irq: Add support for multiple GSI domains
LoongArch: Provisionally add ACPICA data structures
irqdomain: Use hwirq_max instead of revmap_size for NOMAP domains
irqdomain: Report irq number for NOMAP domains
irqchip/gic-v3: Fix comment typo
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/V2L SoC
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"This was a fairly quiet cycle for the locking subsystem:
- lockdep: Fix a handful of the more complex lockdep_init_map_*()
primitives that can lose the lock_type & cause false reports. No
such mishap was observed in the wild.
- jump_label improvements: simplify the cross-arch support of initial
NOP patching by making it arch-specific code (used on MIPS only),
and remove the s390 initial NOP patching that was superfluous"
* tag 'locking-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Fix lockdep_init_map_*() confusion
jump_label: make initial NOP patching the special case
jump_label: mips: move module NOP patching into arch code
jump_label: s390: avoid pointless initial NOP patching
|
|
This reverts commit e98b461bb057aaea6fa766260788c08825213837.
We actually have been using the CONFIG_CAVIUM_RESERVE32 and previous patch
defined it in the corresponding Kconfig.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
This options is used to reserve a shared memory region for user processes
to use for hardware memory buffers. The actual code to support the option
comes in the following patch.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Rearrange kernel-doc notation for 2 functions to eliminate
kernel-doc warnings. Use Return: notation for the function
return value description. Add function short descriptions
for both functions.
Correct 2 typos.
Fixes these kernel-doc warnings:
msi-octeon.c:49: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Called when a driver request MSI interrupts instead of the
msi-octeon.c:49: warning: missing initial short description on line:
* Called when a driver request MSI interrupts instead of the
msi-octeon.c:62: warning: No description found for return value of 'arch_setup_msi_irq'
msi-octeon.c:189: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Called when a device no longer needs its MSI interrupts. All
msi-octeon.c:189: warning: missing initial short description on line:
* Called when a device no longer needs its MSI interrupts. All
Fixes: e8635b484f64 ("MIPS: Add Cavium OCTEON PCI support.")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Aditya Srivastava <yashsri421@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Fix the typo `s/that that/than that/' in line 72.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Move mt_init out of the way for the maple tree. Use mips_mt prefix to
match the rest of the functions in the file.
Link: https://lkml.kernel.org/r/20220504002554.654642-2-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The isa_dma_bridge_buggy symbol is only used for x86_32, and only x86_32
platforms or quirks ever set it.
Add a new linux/isa-dma.h header that #defines isa_dma_bridge_buggy to 0
except on x86_32, where we keep it as a variable, and remove all the arch-
specific definitions.
[bhelgaas: commit log]
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Link: https://lore.kernel.org/r/20220722214944.831438-3-shorne@gmail.com
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
pci_get_legacy_ide_irq() is only used on platforms that support PNP, so
many architectures define it but never use it. Replace uses of it with
ATA_PRIMARY_IRQ() and ATA_SECONDARY_IRQ(), which provide the same
functionality.
Since pci_get_legacy_ide_irq() is no longer used, remove all the
architecture-specific definitions of it as well as asm-generic/pci.h, which
only provides pci_get_legacy_ide_irq()
[bhelgaas: commit log]
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20220722214944.831438-2-shorne@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Pierre Morel <pmorel@linux.ibm.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
* irq/loongarch:
: .
: Merge the long awaited IRQ support for the LoongArch architecture.
:
: From the cover letter:
:
: "Currently, LoongArch based processors (e.g. Loongson-3A5000)
: can only work together with LS7A chipsets. The irq chips in
: LoongArch computers include CPUINTC (CPU Core Interrupt
: Controller), LIOINTC (Legacy I/O Interrupt Controller),
: EIOINTC (Extended I/O Interrupt Controller), PCH-PIC (Main
: Interrupt Controller in LS7A chipset), PCH-LPC (LPC Interrupt
: Controller in LS7A chipset) and PCH-MSI (MSI Interrupt Controller)."
:
: Note that this comes with non-official, arch private ACPICA
: definitions until the official ACPICA update is realeased.
: .
irqchip / ACPI: Introduce ACPI_IRQ_MODEL_LPIC for LoongArch
irqchip: Add LoongArch CPU interrupt controller support
irqchip: Add Loongson Extended I/O interrupt controller support
irqchip/loongson-liointc: Add ACPI init support
irqchip/loongson-pch-msi: Add ACPI init support
irqchip/loongson-pch-pic: Add ACPI init support
irqchip: Add Loongson PCH LPC controller support
LoongArch: Prepare to support multiple pch-pic and pch-msi irqdomain
LoongArch: Use ACPI_GENERIC_GSI for gsi handling
genirq/generic_chip: Export irq_unmap_generic_chip
ACPI: irq: Allow acpi_gsi_to_irq() to have an arch-specific fallback
APCI: irq: Add support for multiple GSI domains
LoongArch: Provisionally add ACPICA data structures
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
LIOINTC stands for "Legacy I/O Interrupts" that described in Section
11.1 of "Loongson 3A5000 Processor Reference Manual". For more
information please refer Documentation/loongarch/irq-chip-model.rst.
Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1658314292-35346-11-git-send-email-lvjianmin@loongson.cn
|
|
PCH-PIC/PCH-MSI stands for "Interrupt Controller" that described in
Section 5 of "Loongson 7A1000 Bridge User Manual". For more information
please refer Documentation/loongarch/irq-chip-model.rst.
Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1658314292-35346-9-git-send-email-lvjianmin@loongson.cn
|
|
This is the order of the page table allocation, not the order of a PGD.
While at it remove unused defintion of _PGD_ORDER in asm-offsets.
Link: https://lkml.kernel.org/r/20220703141203.147893-7-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Xuerui Wang <kernel@xen0n.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This is the order of the page table allocation, not the order of a PTE.
Since its always hardwired to 0, simply drop it.
Link: https://lkml.kernel.org/r/20220703141203.147893-6-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Xuerui Wang <kernel@xen0n.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This is the order of the page table allocation, not the order of a PUD.
Link: https://lkml.kernel.org/r/20220703141203.147893-5-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Xuerui Wang <kernel@xen0n.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This is the order of the page table allocation, not the order of a PMD.
While at it remove unused defintion of _PMD_ORDER in asm-offsets.
Link: https://lkml.kernel.org/r/20220703141203.147893-4-rppt@kernel.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Xuerui Wang <kernel@xen0n.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now all the platforms enable ARCH_HAS_GET_PAGE_PROT. They define and
export own vm_get_page_prot() whether custom or standard
DECLARE_VM_GET_PAGE_PROT. Hence there is no need for default generic
fallback for vm_get_page_prot(). Just drop this fallback and also
ARCH_HAS_GET_PAGE_PROT mechanism.
Link: https://lkml.kernel.org/r/20220711070600.2378316-27-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This enables ARCH_HAS_VM_GET_PAGE_PROT on the platform and exports
standard vm_get_page_prot() implementation via DECLARE_VM_GET_PAGE_PROT,
which looks up a private and static protection_map[] array. Subsequently
all __SXXX and __PXXX macros can be dropped which are no longer needed.
Link: https://lkml.kernel.org/r/20220711070600.2378316-21-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If we were not specified a correct DTB, we will not be able to print
anything useful with panic() which requires a working console of some
sort. Utilize cfe_die() to callback into the CFE default UART and print
some useful diagnostics.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
