summaryrefslogtreecommitdiff
path: root/arch/powerpc
AgeCommit message (Collapse)Author
2014-11-10powerpc/pseries: Quieten ibm,pcie-link-speed-stats warningAnton Blanchard
The ibm,pcie-link-speed-stats isn't mandatory, so we shouldn't print a high priority error message when missing. One example where we see this is QEMU. Reduce it to pr_debug. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-10powerpc: LLVM complains about forward declaration of struct rtas_sensorsAnton Blanchard
Move the declaration up to silence the warning. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-10powerpc: Remove double braces in alignment code.Anton Blanchard
Looks like I introduced this when adding LE support. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-10powerpc: Don't use local named register variable in current_thread_infoAnton Blanchard
LLVM doesn't support local named register variables and is unlikely to. current_thread_info is using one, fix it by moving it out and calling it __current_r1(). I gave it a bit of an obscure name because we don't want anyone else using it - they should use current_stack_pointer(). This specific case is performance critical and we can't afford to call a function to get it. Furthermore it isn't important to know exactly where in the stack we are since we mask the lower bits. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-10powerpc: Remove unused vgacon_remap_base & fix build breakMichael Ellerman
The build is broken with CONFIG_PPC32=y, CONFIG_FB_VGA16=y and CONFIG_VGA_CONSOLE=n. The problem is that vgacon_remap_base is not defined. It's used in: #define VGA_MAP_MEM(x,s) (x + vgacon_remap_base) Which is used in the vga16fb.c code. Digging down it seems vgacon_remap_base is never initialised. It used to be, back in arch/ppc (pplus.c and prep_setup.c), but none of that code ever made it to arch/powerpc. So given it's been unused for >6 years, remove it. Whether vga16fb.c works on 32-bit is another question, but this patch shouldn't affect it. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-10powerpc/jump_label: Use HAVE_JUMP_LABELAnton Blanchard
Commit d4fe0965e208 ("powerpc/jump_label: use HAVE_JUMP_LABEL?") missed a few conversions. Change the remaining uses of CONFIG_JUMP_LABEL to HAVE_JUMP_LABEL. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-10powerpc/boot: Parse chosen/cmdline-timeout parameterSimon Kagstrom
On some platforms a 5 second timeout during boot might be quite long, so make it configurable. Run the loop at least once to let the user stop the boot by holding a key pressed. If the timeout is set to 0, don't wait for input, which can be used as a workaround if the boot hangs on random data coming in on the serial port. Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> [mpe: Changelog wording & whitespace] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-10powerpc: Remove unused CPU_FTRS_A2Michael Ellerman
In commit fb5a515704d7 "Remove platforms/wsp and associated pieces" we removed the last user of CPU_FTRS_A2, so we should remove it too. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-10powerpc: Remove CPU_FTR_HVMODE from CPU_FTRS_ALWAYSMichael Ellerman
We potentially clear CPU_FTR_HVMODE at runtime in __init_hvmode_206(), so we must make sure it's not set in CPU_FTRS_ALWAYS. This doesn't hurt us in practice at the moment, because we don't support compiling only for CPUs that support CPU_FTR_HVMODE. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-10powerpc/ftrace: Fix obsolete commentJiri Slaby
CONFIG_MCOUNT is not defined anymore, the corresponding #ifdef there is CONFIG_FUNCTION_TRACER. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-10powerpc: Remove unused devm_ioremap_prot()Kyle McMartin
Added in 2008, but has never had any in-tree users, and no other architectures provide it. Signed-off-by: Kyle McMartin <kyle@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-10powerpc/ftrace: simplify prepare_ftrace_returnAnton Blanchard
Instead of passing in the stack address of the link register to be modified, just pass in the old value and return the new value and rely on ftrace_graph_caller to do the modification. This removes the exception handling around the stack update - it isn't needed and we weren't consistent about it. Later on we would do an unprotected modification: if (!ftrace_graph_entry(&trace)) { *parent = old; Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-10powerpc/ftrace: Remove mod_return_to_handlerAnton Blanchard
mod_return_to_handler is the same as return_to_handler, except it handles the change of the TOC (r2). Add this into return_to_handler and remove mod_return_to_handler. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-10powerpc: make __ffs return unsigned longAnton Blanchard
I'm seeing a build warning in mm/nobootmem.c after removing bootmem: mm/nobootmem.c: In function '__free_pages_memory': include/linux/kernel.h:713:17: warning: comparison of distinct pointer types lacks a cast [enabled by default] (void) (&_min1 == &_min2); \ ^ mm/nobootmem.c:90:11: note: in expansion of macro 'min' order = min(MAX_ORDER - 1UL, __ffs(start)); ^ The rest of the worlds seems to define __ffs as returning unsigned long, so lets do that. Signed-off-by: Anton Blanchard <anton@samba.org> Tested-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-10powerpc: Move sparse_init() into initmem_initAnton Blanchard
We did part of sparse initialisation in setup_arch and part in initmem_init. Put them together. Signed-off-by: Anton Blanchard <anton@samba.org> Tested-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-10powerpc: Remove superfluous bootmem includesAnton Blanchard
Lots of places included bootmem.h even when not using bootmem. Signed-off-by: Anton Blanchard <anton@samba.org> Tested-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-10powerpc: Remove some old bootmem related commentsAnton Blanchard
Now bootmem is gone from powerpc we can remove comments mentioning it. Signed-off-by: Anton Blanchard <anton@samba.org> Tested-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-10powerpc: Remove bootmem allocatorAnton Blanchard
At the moment we transition from the memblock alloctor to the bootmem allocator. Gitting rid of the bootmem allocator removes a bunch of complicated code (most of which I owe the dubious honour of being responsible for writing). Signed-off-by: Anton Blanchard <anton@samba.org> Tested-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-07powerpc/dts: Add node(s) for the platform PLLEmil Medve
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Change-Id: If76cd705a01813abe53396c1486bc13c4289ee92 Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-11-07powerpc/dts: Factorize the clock control nodeEmil Medve
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Change-Id: I25ce24a25862b4ca460164159867abefe00ccdd1 Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-11-07powerpc: Add INA220 to device tree for supported boardsHongtao Jia
Including: P3041DS P5020DS P5040DS B4QDS Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-11-07powerpc: Add ADT7461 to device tree for supported boardsHongtao Jia
Including: T104xRDB T208xQDS B4QDS Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-11-07powerpc/fsl: Added rcw registers to global utility registersIgal Liberman
The RCW registers are required for the future clock binding implementation. Signed-off-by: Igal Liberman <Igal.Liberman@freescale.com> Change-Id: Ic36dd8bc2959aa7f97fb6fd7bbb8420822fef0a9 Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-11-07powerpc/mpc85xx: Remove SPI and NAND partition from bsc9131rdb.dtsiAshish Kumar
* Run "mtdparts default" on u-boot to create dynamic partitions * Or use dynamic mtd partition with the help of bootargs in u-boot Append bootargs with: "mtdparts=ff800000.flash:1m(nand_uboot),512K(nand_dtb),8m(nand_kernel),-(fs);\ spiff707000.0:1m(spi_uboot),4m(spi_kernel),512k(spi_dtb),-(fs)'" Signed-off-by: Ashish Kumar <Ashish.Kumar@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-11-07powerpc/8xx: Remove Kconfig symbol FADSPaul Bolle
Commit 39eb56da2b53 ("pcmcia: Remove m8xx_pcmcia driver") removed the only driver that used CONFIG_FADS. Setting the Kconfig symbol FADS is pointless since that commit. Remove it. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-11-07powerpc/8xx: Invalidate non present TLB as early as possibleLEROY Christophe
8xx sometimes need to load a invalid/non-present TLBs in it DTLB asm handler. These must be invalidated separaly as linux mm doesn't. Commit 5efab4a02c89c252fb4cce097aafde5f8208dbfe was invalidating them in arch/powerpc/mm/fault.c. This patch does the invalidation earlier in order to free the TLB as soon as possible. This also has the advantage of removing some 8xx specific code from fault.c Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-11-07powerpc/8xx: Use DAR to save r3 for CPU6 ERRATALEROY Christophe
As we are not using anymore DAR to save registers, it is now available for saving the r3 register used for CPU6 ERRATA handling. Therefore we can remove the major hack which was to use memory location 0 to save r3. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-11-07powerpc/8xx: Don't restore regs to save them again.LEROY Christophe
There is not need to restore r10, r11 and cr registers at this end of ITLBmiss handler as they are saved again to the same place in ITLBError handler we are jumping to. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-11-07powerpc/8xx: _PMD_PRESENT already set in level 1 entriesLEROY Christophe
When a PMD entry is valid, _PMD_PRESENT is set. Therefore, forcing that bit during TLB loading is useless. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-11-07powerpc/8xx: set PTE bit 22 off TLBmissLEROY Christophe
No need to re-set this bit at each TLB miss. Let's set it in the PTE. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-11-07powerpc/8xx: Better readibility of ERRATA CPU6 handlingLEROY Christophe
This patch hiddes that SPR address needed for CPU6 ERRATA handling in the macro. Then we don't have to worry about this address directly in the code. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-11-07powerpc/8xx: Implement 16k pagesLEROY Christophe
This patch activates the handling of 16k pages on the MPC8xx. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-11-07powerpc/8xx: Const for TLB RPN forced valueLEROY Christophe
Value 0x00f0 is used to force bits in TLB level 2 entry. This value is linked to the page size and will vary when we change the page size. Lets define a const for it in order to have it at only one place. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-11-07powerpc/8xx: Use PAGE size related constsLEROY Christophe
For PAGE size related operations, use PAGE size consts in order to be able to use different page size in the futur. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-11-07powerpc/8xx: Don't use MD_TWC for walkLEROY Christophe
MD_TWC can only be used properly with 4k pages. So lets calculate level 2 table index by ourselves. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-11-07powerpc/8xx: Use M_TW instead of M_TWBLEROY Christophe
Use M_TW instead of M_TWB for storing Level 1 table address as M_TWB requires 4k aligned tables, which is only the case with 4k pages. Consequently, we have to calculate the level 1 table index by ourselves. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-11-07powerpc/8xx: No need to restore registers and save them again.LEROY Christophe
In DTLBError handler there is not need to restore r10, r11 and cr registers after fixing DAR as they are saved again to the same place just after. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-11-07powerpc/8xx: DataAccess exception not generated by MPC8xxLEROY Christophe
DataAccess exception is never generated by MPC8xx so do the job directly where it is used to avoid an unnecessary branching. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-11-07powerpc/8xx: exception InstructionAccess does not exist on MPC8xxLEROY Christophe
Exception InstructionAccess does not exist on MPC8xx. No need to branch there from somewhere else. Handling can be done directly in InstructionTLBError Exception. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-11-05powerpc: Remove ppc_md.remove_memoryAnton Blanchard
We have an extra level of indirection on memory hot remove which is not matched on memory hot add. Memory hotplug is book3s only, so there is no need for it. This also enables means remove_memory() (ie memory hot unplug) works on powernv. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-05powerpc: Remove ppc64_boot_msgAnton Blanchard
ppc64_boot_msg is meant to be a boot debug aid, but is only used in one spot. Get rid of it, and save ourseleves a couple of lines in the kernel log buffer. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-05powerpc/pci: Quieten unset I/O resource warningAnton Blanchard
Newer POWER designs do not implement PCI I/O space, so we expect to see a number of these. Reduce the severity of the warning so it doesn't mask other real issues. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-05powerpc: Use probe_kernel_address in show_instructionsAnton Blanchard
We really don't want to take a pagefault in show_instructions, so use probe_kernel_address instead of __get_user. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-05Merge branch 'topic/get-cpu-var' into nextMichael Ellerman
2014-11-05Merge branch 'topic/pm-power-off' into nextMichael Ellerman
2014-11-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc fixes from Michael Ellerman: "Some more powerpc fixes if you please" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc: use device_online/offline() instead of cpu_up/down() powerpc/powernv: Properly fix LPC debugfs endianness powerpc: do_notify_resume can be called with bad thread_info flags argument powerpc/fadump: Fix endianess issues in firmware assisted dump handling powerpc: Fix section mismatch warning
2014-11-03Merge branch 'platform/remove_owner' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next Remove all .owner fields from platform drivers
2014-11-03PPC: bpf_jit_comp: add SKF_AD_PKTTYPE instructionDenis Kirjanov
Add BPF extension SKF_AD_PKTTYPE to ppc JIT to load skb->pkt_type field. Before: [ 88.262622] test_bpf: #11 LD_IND_NET 86 97 99 PASS [ 88.265740] test_bpf: #12 LD_PKTTYPE 109 107 PASS After: [ 80.605964] test_bpf: #11 LD_IND_NET 44 40 39 PASS [ 80.607370] test_bpf: #12 LD_PKTTYPE 9 9 PASS CC: Alexei Starovoitov<alexei.starovoitov@gmail.com> CC: Michael Ellerman<mpe@ellerman.id.au> Cc: Matt Evans <matt@ozlabs.org> Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> v2: Added test rusults Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03move d_rcu from overlapping d_child to overlapping d_aliasAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-03powerpc: Convert power off logic to pm_power_offAlexander Graf
The generic Linux framework to power off the machine is a function pointer called pm_power_off. The trick about this pointer is that device drivers can potentially implement it rather than board files. Today on powerpc we set pm_power_off to invoke our generic full machine power off logic which then calls ppc_md.power_off to invoke machine specific power off. However, when we want to add a power off GPIO via the "gpio-poweroff" driver, this card house falls apart. That driver only registers itself if pm_power_off is NULL to ensure it doesn't override board specific logic. However, since we always set pm_power_off to the generic power off logic (which will just not power off the machine if no ppc_md.power_off call is implemented), we can't implement power off via the generic GPIO power off driver. To fix this up, let's get rid of the ppc_md.power_off logic and just always use pm_power_off as was intended. Then individual drivers such as the GPIO power off driver can implement power off logic via that function pointer. With this patch set applied and a few patches on top of QEMU that implement a power off GPIO on the virt e500 machine, I can successfully turn off my virtual machine after halt. Signed-off-by: Alexander Graf <agraf@suse.de> [mpe: Squash into one patch and update changelog based on cover letter] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit (git 2.34.1) at 2025-09-12 01:23:08 +0000