summaryrefslogtreecommitdiff
path: root/arch/powerpc
AgeCommit message (Collapse)Author
2010-05-17KVM: PPC: Book3S_32 guest MMU fixesAlexander Graf
This patch makes the VSID of mapped pages always reflecting all special cases we have, like split mode. It also changes the tlbie mask to 0x0ffff000 according to the spec. The mask we used before was incorrect. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17KVM: PPC: Make DSISR 32 bits wideAlexander Graf
DSISR is only defined as 32 bits wide. So let's reflect that in the structs too. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17KVM: PPC: Allow userspace to unset the IRQ lineAlexander Graf
Userspace can tell us that it wants to trigger an interrupt. But so far it can't tell us that it wants to stop triggering one. So let's interpret the parameter to the ioctl that we have anyways to tell us if we want to raise or lower the interrupt line. Signed-off-by: Alexander Graf <agraf@suse.de> v2 -> v3: - Add CAP for unset irq Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17KVM: PPC: Ensure split mode worksAlexander Graf
On PowerPC we can go into MMU Split Mode. That means that either data relocation is on but instruction relocation is off or vice versa. That mode didn't work properly, as we weren't always flushing entries when going into a new split mode, potentially mapping different code or data that we're supposed to. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17KVM: PPC: Do not create debugfs if fail to create vcpuWei Yongjun
If fail to create the vcpu, we should not create the debugfs for it. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Acked-by: Alexander Graf <agraf@suse.de> Cc: stable@kernel.org Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-14add descriptive comment for TIF_MEMDIE task flag declaration.Andreas Dilger
Signed-off-by: Andreas Dilger <adilger@dilger.ca> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-13KVM: PPC: Keep index within boundaries in kvmppc_44x_emul_tlbwe()Roel Kluin
An index of KVM44x_GUEST_TLB_SIZE is already one too large. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Hollis Blanchard <hollis@penguinppc.org> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-13Merge commit 'kumar/merge' into mergeBenjamin Herrenschmidt
2010-05-12powerpc/44x: Add basic ICON PPC440SPe board supportStefan Roese
ICON is based on the AppliedMicro 440SPe. It is equipped with 64MByte NOR FLASH, SODIMM, Gigabit ethernet, SM502 on PCI(X), LSI SAS1068E on PCIe0 and custom FPGA on PCIe1. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-05-12powerpc/44x: Fix UART clocks on 440SPeBenjamin Herrenschmidt
The code to fixup the serial ports on 440SPe uses the incorrect addresses for these. This fixes it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-05-12powerpc/perf_event: Fix oops due to perf_event_do_pending callPaul Mackerras
Anton Blanchard found that large POWER systems would occasionally crash in the exception exit path when profiling with perf_events. The symptom was that an interrupt would occur late in the exit path when the MSR[RI] (recoverable interrupt) bit was clear. Interrupts should be hard-disabled at this point but they were enabled. Because the interrupt was not recoverable the system panicked. The reason is that the exception exit path was calling perf_event_do_pending after hard-disabling interrupts, and perf_event_do_pending will re-enable interrupts. The simplest and cleanest fix for this is to use the same mechanism that 32-bit powerpc does, namely to cause a self-IPI by setting the decrementer to 1. This means we can remove the tests in the exception exit path and raw_local_irq_restore. This also makes sure that the call to perf_event_do_pending from timer_interrupt() happens within irq_enter/irq_exit. (Note that calling perf_event_do_pending from timer_interrupt does not mean that there is a possible 1/HZ latency; setting the decrementer to 1 ensures that the timer interrupt will happen immediately, i.e. within one timebase tick, which is a few nanoseconds or 10s of nanoseconds.) Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: stable@kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-11perf, powerpc: Implement group scheduling transactional APIsLin Ming
[paulus@samba.org: Set cpuhw->event[i]->hw.config in power_pmu_commit_txn.] Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20100508102841.GA10650@brick.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-07powerpc/44x: Add reset-type to katmai.dtsStefan Roese
Katmai needs "reset-type" = "chip reset" (2) to correctly reboot the board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-05-07powerpc/44x: Adding PCI-E support for PowerPC 460SX based SOC.Tirumala Marri
Add support for PCI-e on the AMCC 460SX boards Signed-off-by: Tirumala Marri <tmarri@amcc.com> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-05-07Merge commit 'origin/master' into nextBenjamin Herrenschmidt
2010-05-06powerpc/cpumask: Add DEBUG_PER_CPU_MAPS optionAnton Blanchard
Enable the DEBUG_PER_CPU_MAPS option so we can look for problems with cpumasks . Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Convert mpic driver to new cpumask APIBenjamin Herrenschmidt
Convert to the new cpumask API. irq_choose_cpu can be simplified by using cpumask_next and cpumask_first. smp_mpic_message_pass was doing open coded cpumask manipulation and passing an int for a cpumask into mpic_send_ipi. Since mpic_send_ipi is only used locally, make it static and convert it to take a cpumask. This allows us to clean up the mess in smp_mpic_message_pass. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Update some commentsAnton Blanchard
Since the *_map cpumask variants are deprecated, change the comments to instead refer to *_mask. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Convert NUMA code to new cpumask APIAnton Blanchard
Convert NUMA code to new cpumask API. We shift the node to cpumask setup code until after we complete bootmem allocation so we can dynamically allocate the cpumasks. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Convert hotplug-cpu code to new cpumask APIAnton Blanchard
Convert hotplug-cpu code to new cpumask API. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Dynamically allocate cpu_sibling_map and cpu_core_map cpumasksAnton Blanchard
Dynamically allocate cpu_sibling_map and cpu_core_map cpumasks. We don't need to set_cpu_online() the boot cpu in smp_prepare_boot_cpu, init/main.c does it for us. We also postpone setting of the boot cpu in cpu_sibling_map and cpu_core_map until when the memory allocator is available (smp_prepare_cpus), similar to x86. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Convert /proc/cpuinfo to new cpumask APIAnton Blanchard
Use new cpumask API in /proc/cpuinfo code. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Refactor /proc/cpuinfo codeAnton Blanchard
This separates the per cpu output from the summary output at the end of the file, making it easier to convert to the new cpumask API in a subsequent patch. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Convert xics driver to new cpumask APIAnton Blanchard
Use the new cpumask API and add some comments to clarify how get_irq_server works. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Convert pseries SMP code to new cpumask APIAnton Blanchard
Use new cpumask functions in pseries SMP startup code. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Convert iseries SMP code to new cpumask APIAnton Blanchard
Use new cpumask functions in iseries SMP startup code. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Convert fixup_irqs to new cpumask APIAnton Blanchard
Use new cpumask_* functions, and dynamically allocate cpumask in fixup_irqs. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Convert smp_cpus_done to new cpumask APIAnton Blanchard
Use the new cpumask_* functions and dynamically allocate the cpumask in smp_cpus_done. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Convert rtasd to new cpumask APIAnton Blanchard
Use cpumask_first, cpumask_next in rtasd code. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Use cpu_online_maskAnton Blanchard
Change &cpu_online_map to cpu_online_mask. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc: Invoke oom-killer from page faultBenjamin Herrenschmidt
As explained in commit 1c0fe6e3bd, we want to call the architecture independent oom killer when getting an unexplained OOM from handle_mm_fault, rather than simply killing current. Cc: linuxppc-dev@ozlabs.org Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linux-arch@vger.kernel.org Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/mm: Track backing pages allocated by vmemmap_populate()Mark Nelson
We need to keep track of the backing pages that get allocated by vmemmap_populate() so that when we use kdump, the dump-capture kernel knows where these pages are. We use a simple linked list of structures that contain the physical address of the backing page and corresponding virtual address to track the backing pages. To save space, we just use a pointer to the next struct vmemmap_backing. We can also do this because we never remove nodes. We call the pointer "list" to be compatible with changes made to the crash utility. vmemmap_populate() is called either at boot-time or on a memory hotplug operation. We don't have to worry about the boot-time calls because they will be inherently single-threaded, and for a memory hotplug operation vmemmap_populate() is called through: sparse_add_one_section() | V kmalloc_section_memmap() | V sparse_mem_map_populate() | V vmemmap_populate() and in sparse_add_one_section() we're protected by pgdat_resize_lock(). So, we don't need a spinlock to protect the vmemmap_list. We allocate space for the vmemmap_backing structs by allocating whole pages in vmemmap_list_alloc() and then handing out chunks of this to vmemmap_list_populate(). This means that we waste at most just under one page, but this keeps the code is simple. Signed-off-by: Mark Nelson <markn@au1.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc: Correct parport interrupt parsingMartyn Welch
Currently the parsing of the device tree in arch/powerpc/include/asm/parport.h assumes that the interrupt provided in the parallel port node is a valid virtual irq. The values for the interrupts provided in the device tree should have meaning in the context of the driver for the specific interrupt controller to which the interrupt is connected and irq_of_parse_and_map() should be used to determine the correct virtual irq. Signed-off-by: Martyn Welch <martyn.welch@ge.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc: Fix CONFIG_DEBUG_PAGEALLOC on 603/e300Benjamin Herrenschmidt
So we tried to speed things up a bit using flush_hash_pages() directly but that falls over on 603 of course meaning we fail to flush the TLB properly and we may even end up having it corrupt memory randomly by accessing a hash table that doesn't exist. This removes the "optimization" by always going through flush_tlb_page() for now at least. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/pseries: Only call start-cpu when a CPU is stoppedMichael Neuling
Currently we always call start-cpu irrespective of if the CPU is stopped or not. Unfortunatley on POWER7, firmware seems to not like start-cpu being called when a cpu already been started. This was not the case on POWER6 and earlier. This patch checks to see if the CPU is stopped or not via an query-cpu-stopped-state call, and only calls start-cpu on CPUs which are stopped. This fixes a bug with kexec on POWER7 on PHYP where only the primary thread would make it to the second kernel. Reported-by: Ankita Garg <ankita@linux.vnet.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/pseries: Make query_cpu_stopped callable outside hotplug cpuMichael Neuling
This moves query_cpu_stopped() out of the hotplug cpu code and into smp.c so it can called in other places and renames it to smp_query_cpu_stopped(). It also cleans up the return values by adding some #defines Cc: <stable@kernel.org> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-05powerpc/4xx: Add optional "reset_type" property to control reboot via dtsStefan Roese
By setting "reset_type" to one of the following values, the default software reset mechanism may be overidden. Here the possible values of "reset_type": 1 - PPC4xx core reset 2 - PPC4xx chip reset 3 - PPC4xx system reset (default) This will be used by a new PPC440SPe board port, which needs a "chip reset" instead of the default "system reset" to be asserted. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-05-05powerpc/47x: defconfig for 476 on the iss 4xx simulatorDave Kleikamp
A defconfig for the IBM ISS 476 simulator Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-05-05powerpc/4xx: Simple platform for the ISS 4xx simulatorTorez Smith
This is a trivial 4xx plaform that uses the new simple bsp from Josh and is handy to use in simulators such as ISS or even Mambo who don't properly implement most of the actual devices in the SoC but really only the core. Signed-off-by: Torez Smith <lnxtorez@linux.vnet.ibm.com> Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-05-05powerpc/476: Add isync after loading mmu and debug spr'sDave Kleikamp
476 requires an isync after loading MMU and debug related SPR's. Some of these are in performance-critical paths and may need to be optimized, but initially, we're playing it safe. Signed-off-by: Torez Smith <lnxtorez@linux.vnet.ibm.com> Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-05-05powerpc/476: add machine check handler for 47x coreDave Kleikamp
The 47x core's MCSR varies from 44x, so it needs it's own machine check handler. Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-05-05powerpc/47x: Base ppc476 supportDave Kleikamp
This patch adds the base support for the 476 processor. The code was primarily written by Ben Herrenschmidt and Torez Smith, but I've been maintaining it for a while. The goal is to have a single binary that will run on 44x and 47x, but we still have some details to work out. The biggest is that the L1 cache line size differs on the two platforms, but it's currently a compile-time option. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Torez Smith <lnxtorez@linux.vnet.ibm.com> Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-05-05powerpc/44x: break out cpu init code into stand-alone functionDave Kleikamp
The 47x platform supports multiple cores and shares code with 44x. Break out code that is common for initializing the primary and secondary cpus into a function which can be called for both. Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-05-05powerpc/booke: Add Stack Marking support to Booke Exception PrologTorez Smith
This patch adds a marker to the exception stack frame to aid in debugging. It's already inserted on other platforms and xmon recognizes it and identifies exception frames when showing stack traces. Signed-off-by: Torez Smith <lnxtorez@linux.vnet.ibm.com> Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-05-04powerpc/swiotlb: Fix off by one in determining boundary of which ops to useKumar Gala
When we compare the devices DMA mask to the amount of memory we need to make sure we treat the DMA mask as an address boundary. For example if the DMA_MASK(32) and we have 4G of memory we'd incorrectly set the dma ops to swiotlb. We need to add one to the dma mask when we convert it. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-29Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kgdb: don't needlessly skip PAGE_USER test for Fsl booke
2010-04-29kgdb: don't needlessly skip PAGE_USER test for Fsl bookeWufei
The bypassing of this test is a leftover from 2.4 vintage kernels, and is no longer appropriate, or even used by KGDB. Currently KGDB uses probe_kernel_write() for all access to memory via the KGDB core, so it can simply be deleted. This fixes CVE-2010-1446. CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> CC: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Wufei <fei.wu@windriver.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-04-29Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/ps3: Update ps3_defconfig powerpc/ps3: Update platform maintainer powerpc/pseries: Flush lazy kernel mappings after unplug operations powerpc/numa: Add form 1 NUMA affinity powerpc/fsl-booke: Fix CONFIG_RELOCATABLE support on FSL Book-E ppc32 powerpc: 2.6.34 update of defconfigs for embedded 6xx/7xxx, 8xx, 8xxx powerpc/mpc8xxx defconfigs - turn off SYSFS_DEPRECATED powerpc/83xx: configure SIL SATA driver in 83xx-wide defconfig powerpc/83xx: enable EPOLL syscall in defconfig powerpc/83xx: add RTC drivers in 83xx defconfig powerpc/fsl-cpm: Configure clock correctly for SCC powerpc/fsl_booke: Correct test for MMU_FTR_BIG_PHYS powerpc/85xx/86xx: Fix build w/ CONFIG_PCI=n
2010-04-28driver-core: Add device node pointer to struct deviceGrant Likely
Currently, platforms using CONFIG_OF add a 'struct device_node *of_node' to dev->archdata. However, with CONFIG_OF becoming generic for all architectures, it makes sense for commonality to move it out of archdata and into struct device proper. This patch adds a struct device_node *of_node member to struct device and updates all locations which currently write the device_node pointer into archdata to also update dev->of_node. Subsequent patches will modify callers to use the archdata location and ultimately remove the archdata member entirely. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> CC: Michal Simek <monstr@monstr.eu> CC: Greg Kroah-Hartman <gregkh@suse.de> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: "David S. Miller" <davem@davemloft.net> CC: Stephen Rothwell <sfr@canb.auug.org.au> CC: Jeremy Kerr <jeremy.kerr@canonical.com> CC: microblaze-uclinux@itee.uq.edu.au CC: linux-kernel@vger.kernel.org CC: linuxppc-dev@ozlabs.org CC: sparclinux@vger.kernel.org
2010-04-28powerpc/ps3: Update ps3_defconfigGeoff Levand
Refresh ps3_defconfig to latest kernel sources and change these kernel config options: o CONFIG_USB_ANNOUNCE_NEW_DEVICES: n -> y o CONFIG_USB_EHCI_TT_NEWSCHED: n -> y o CONFIG_CMDLINE_BOOL: n -> y o CONFIG_CMDLINE: n -> "" Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
generated by cgit (git 2.34.1) at 2025-09-24 02:51:04 +0000