summaryrefslogtreecommitdiff
path: root/arch/s390
AgeCommit message (Collapse)Author
2016-06-13s390/mm: fix vunmap vs finish_arch_post_lock_switchMartin Schwidefsky
The vunmap_pte_range() function calls ptep_get_and_clear() without any locking. ptep_get_and_clear() uses ptep_xchg_lazy()/ptep_flush_direct() for the page table update. ptep_flush_direct requires that preemption is disabled, but without any locking this is not the case. If the kernel preempts the task while the attach_counter is increased an endless loop in finish_arch_post_lock_switch() will occur the next time the task is scheduled. Add explicit preempt_disable()/preempt_enable() calls to the relevant functions in arch/s390/mm/pgtable.c. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-13s390/time: remove ETR supportMartin Schwidefsky
The External-Time-Reference (ETR) clock synchronization interface has been superseded by Server-Time-Protocol (STP). Remove the outdated ETR interface. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-13s390/time: add leap seconds to initial system timeMartin Schwidefsky
The PTFF instruction can be used to retrieve information about UTC including the current number of leap seconds. Use this value to convert the coordinated server time value of the TOD clock to a proper UTC timestamp to initialize the system time. Without this correction the system time will be off by the number of leap seonds until it has been corrected via NTP. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-13s390/time: LPAR offset handlingMartin Schwidefsky
It is possible to specify a user offset for the TOD clock, e.g. +2 hours. The TOD clock will carry this offset even if the clock is synchronized with STP. This makes the time stamps acquired with get_sync_clock() useless as another LPAR migth use a different TOD offset. Use the PTFF instrution to get the TOD epoch difference and subtract it from the TOD clock value to get a physical timestamp. As the epoch difference contains the sync check delta as well the LPAR offset value to the physical clock needs to be refreshed after each clock synchronization. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-13s390/time: move PTFF definitionsMartin Schwidefsky
The PTFF instruction is not a function of ETR, rename and move the PTFF definitions from etr.h to timex.h. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-13s390/time: STP sync clock correctionMartin Schwidefsky
The sync clock operation of the channel subsystem call for STP delivers the TOD clock difference as a result. Use this TOD clock difference instead of the difference between the TOD timestamps before and after the sync clock operation. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-13s390/kexec: fix crash on resize of reserved memoryHeiko Carstens
Reducing the size of reserved memory for the crash kernel will result in an immediate crash on s390. Reason for that is that we do not create struct pages for memory that is reserved. If that memory is freed any access to struct pages which correspond to this memory will result in invalid memory accesses and a kernel panic. Fix this by properly creating struct pages when the system gets initialized. Change the code also to make use of set_memory_ro() and set_memory_rw() so page tables will be split if required. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-13s390/kexec: fix update of os_info crash kernel sizeHeiko Carstens
Implement an s390 version of the weak crash_free_reserved_phys_range function. This allows us to update the size of the reserved crash kernel memory if it will be resized. This was previously done with a call to crash_unmap_reserved_pages from crash_shrink_memory which was removed with ("s390/kexec: consolidate crash_map/unmap_reserved_pages() and arch_kexec_protect(unprotect)_crashkres()") Fixes: 7a0058ec7860 ("s390/kexec: consolidate crash_map/unmap_reserved_pages() and arch_kexec_protect(unprotect)_crashkres()") Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-13s390/mm: align swapper_pg_dir to 16kHeiko Carstens
The segment/region table that is part of the kernel image must be properly aligned to 16k in order to make the crdte inline assembly work. Otherwise it will calculate a wrong segment/region table start address and access incorrect memory locations if the swapper_pg_dir is not aligned to 16k. Therefore define BSS_FIRST_SECTIONS in order to put the swapper_pg_dir at the beginning of the bss section and also align the bss section to 16k just like other architectures did. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-13s390: dump_stack: fill in arch descriptionChristian Borntraeger
Lets provide the basic machine information for dump_stack on s390. This enables the "Hardware name:" line and results in output like [...] Oops: 0004 ilc:2 [#1] SMP Modules linked in: CPU: 1 PID: 74 Comm: sh Not tainted 4.5.0+ #205 Hardware name: IBM 2964 NC9 704 (KVM) [...] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-13s390: use canonical include guard styleDaniel van Gerpen
Signed-off-by: Daniel van Gerpen <daniel@vangerpen.de> Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-13s390/cpuinfo: show dynamic and static cpu mhzHeiko Carstens
Show the dynamic and static cpu mhz of each cpu. Since these values are per cpu this requires a fundamental extension of the format of /proc/cpuinfo. Historically we had only a single line per cpu and a summary at the top of the file. This format is hardly extendible if we want to add more per cpu information. Therefore this patch adds per cpu blocks at the end of /proc/cpuinfo: cpu : 0 cpu Mhz dynamic : 5504 cpu Mhz static : 5504 cpu : 1 cpu Mhz dynamic : 5504 cpu Mhz static : 5504 cpu : 2 cpu Mhz dynamic : 5504 cpu Mhz static : 5504 cpu : 3 cpu Mhz dynamic : 5504 cpu Mhz static : 5504 Right now each block contains only the dynamic and static cpu mhz, but it can be easily extended like on every other architecture. This extension is supposed to be compatible with the old format. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-13s390/cpuinfo: print cache info and all single cpu lines on first iterationHeiko Carstens
Change the code to print all the current output during the first iteration. This is a preparation patch for the upcoming per cpu block extension to /proc/cpuinfo. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-13s390: add explicit <linux/stringify.h> for jump labelJason Baron
Ensure that we always have __stringify(). Signed-off-by: Jason Baron <jbaron@akamai.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-13s390/pgtable: add mapping statisticsHeiko Carstens
Add statistics that show how memory is mapped within the kernel identity mapping. This is more or less the same like git commit ce0c0e50f94e ("x86, generic: CPA add statistics about state of direct mapping v4") for x86. I also intentionally copied the lower case "k" within DirectMap4k vs the upper case "M" and "G" within the two other lines. Let's have consistent inconsistencies across architectures. The output of /proc/meminfo now contains these additional lines: DirectMap4k: 2048 kB DirectMap1M: 3991552 kB DirectMap2G: 4194304 kB The implementation on s390 is lockless unlike the x86 version, since I assume changes to the kernel mapping are a very rare event. Therefore it really doesn't matter if these statistics could potentially be inconsistent if read while kernel pages tables are being changed. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-13s390/vmem: simplify vmem code for read-only mappingsHeiko Carstens
For the kernel identity mapping map everything read-writeable and subsequently call set_memory_ro() to make the ro section read-only. This simplifies the code a lot. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-13s390/pageattr: allow kernel page table splittingHeiko Carstens
set_memory_ro() and set_memory_rw() currently only work on 4k mappings, which is good enough for module code aka the vmalloc area. However we stumbled already twice into the need to make this also work on larger mappings: - the ro after init patch set - the crash kernel resize code Therefore this patch implements automatic kernel page table splitting if e.g. set_memory_ro() would be called on parts of a 2G mapping. This works quite the same as the x86 code, but is much simpler. In order to make this work and to be architecturally compliant we now always use the csp, cspg or crdte instructions to replace valid page table entries. This means that set_memory_ro() and set_memory_rw() will be much more expensive than before. In order to avoid huge latencies the code contains a couple of cond_resched() calls. The current code only splits page tables, but does not merge them if it would be possible. The reason for this is that currently there is no real life scenarion where this would really happen. All current use cases that I know of only change access rights once during the life time. If that should change we can still implement kernel page table merging at a later time. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-13s390/pgtable: make pmd and pud helper functions availableHeiko Carstens
Make pmd_wrprotect() and pmd_mkwrite() available independently from CONFIG_TRANSPARENT_HUGEPAGE and CONFIG_HUGETLB_PAGE so these can be used on the kernel mapping. Also introduce a couple of pud helper functions, namely pud_pfn(), pud_wrprotect(), pud_mkwrite(), pud_mkdirty() and pud_mkclean() which only work on the kernel mapping. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-13s390/mm: always use PAGE_KERNEL when mapping pagesHeiko Carstens
Always use PAGE_KERNEL when re-enabling pages within the kernel mapping due to debug pagealloc. Without using this pgprot value pte_mkwrite() and pte_wrprotect() won't work on such mappings after an unmap -> map cycle anymore. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-13s390/vmem: make use of pte_clear()Heiko Carstens
Use pte_clear() instead of open-coding it. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-13s390/pgtable: get rid of _REGION3_ENTRY_ROHeiko Carstens
_REGION3_ENTRY_RO is a duplicate of _REGION_ENTRY_PROTECT. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-13s390/vmem: introduce and use SEGMENT_KERNEL and REGION3_KERNELHeiko Carstens
Instead of open-coded SEGMENT_KERNEL and REGION3_KERNEL assignments use defines. Also to make e.g. pmd_wrprotect() work on the kernel mapping a couple more flags must be set. Therefore add the missing flags also. In order to make everything symmetrical this patch also adds software dirty, young, read and write bits for region 3 table entries. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-13s390/vmem: align segment and region tables to 16kHeiko Carstens
Usually segment and region tables are 16k aligned due to the way the buddy allocator works. This is not true for the vmem code which only asks for a 4k alignment. In order to be consistent enforce a 16k alignment here as well. This alignment will be assumed and therefore is required by the pageattr code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-13s390/pgtable: introduce and use generic csp inline asmHeiko Carstens
We have already two inline assemblies which make use of the csp instruction. Since I need a third instance let's introduce a generic inline assmebly which can be used by everyone. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-13KVM: s390/mm: Fix CMMA reset during rebootChristian Borntraeger
commit 1e133ab296f ("s390/mm: split arch/s390/mm/pgtable.c") factored out the page table handling code from __gmap_zap and __s390_reset_cmma into ptep_zap_unused and added a simple flag that tells which one of the function (reset or not) is to be made. This also changed the behaviour, as it also zaps unused page table entries on reset. Turns out that this is wrong as s390_reset_cmma uses the page walker, which DOES NOT take the ptl lock. The most simple fix is to not do the zapping part on reset (which uses the walker) Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Fixes: 1e133ab296f ("s390/mm: split arch/s390/mm/pgtable.c") Cc: stable@vger.kernel.org # 4.6+ Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-10KVM: s390: handle missing storage-key facilityDavid Hildenbrand
Without the storage-key facility, SIE won't interpret SSKE, ISKE and RRBE for us. So let's add proper interception handlers that will be called if lazy sske cannot be enabled. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-10KVM: s390: trace and count all skey interceptsDavid Hildenbrand
Let's trace and count all skey handling operations, even if lazy skey handling was already activated. Also, don't enable lazy skey handling if anything went wrong while enabling skey handling for the SIE. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-10s390/sclp: detect storage-key facilityDavid Hildenbrand
Let's correctly detect that facility. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-10KVM: s390: pfmf: handle address overflowsDavid Hildenbrand
In theory, end could always end up being < start, if overflowing to 0. Although very unlikely for now, let's just fix it. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-10KVM: s390: pfmf: support conditional-sske facilityDavid Hildenbrand
We already indicate that facility but don't implement it in our pfmf interception handler. Let's add a new storage key handling function for conditionally setting the guest storage key. As we will reuse this function later on, let's directly implement returning the old key via parameter and indicating if any change happened via rc. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-10KVM: s390: pfmf: take care of amode when setting reg2David Hildenbrand
Depending on the addressing mode, we must not overwrite bit 0-31 of the register. In addition, 24 bit and 31 bit have to set certain bits to 0, which is guaranteed by converting the end address to an effective address. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-10KVM: s390: pfmf: MR and MC are ignored without CSSKEDavid Hildenbrand
These two bits are simply ignored when the conditional-SSKE facility is not installed. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-10KVM: s390: pfmf: fix end address calculationDavid Hildenbrand
The current calculation is wrong if absolute != real address. Let's just calculate the start address for 4k frames upfront. Otherwise, the calculated end address will be wrong, resulting in wrong memory location/storage keys getting touched. To keep low-address protection working (using the effective address), we have to move the check. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-10KVM: s390: storage keys fit into a charDavid Hildenbrand
No need to convert the storage key into an unsigned long, the target function expects a char as argument. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-10s390/mm: return key via pointer in get_guest_storage_keyDavid Hildenbrand
Let's just split returning the key and reporting errors. This makes calling code easier and avoids bugs as happened already. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-10s390/mm: simplify get_guest_storage_keyDavid Hildenbrand
We can safe a few LOC and make that function easier to understand by rewriting existing code. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-10s390/mm: set and get guest storage key mmap lockingMartin Schwidefsky
Move the mmap semaphore locking out of set_guest_storage_key and get_guest_storage_key. This makes the two functions more like the other ptep_xxx operations and allows to avoid repeated semaphore operations if multiple keys are read or written. Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-10s390/mm: don't drop errors in get_guest_storage_keyDavid Hildenbrand
Commit 1e133ab296f3 ("s390/mm: split arch/s390/mm/pgtable.c") changed the return value of get_guest_storage_key to an unsigned char, resulting in -EFAULT getting interpreted as a valid storage key. Cc: stable@vger.kernel.org # 4.6+ Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-10KVM: s390: fixup I/O interrupt tracesChristian Borntraeger
We currently have two issues with the I/O interrupt injection logging: 1. All QEMU versions up to 2.6 have a wrong encoding of device numbers etc for the I/O interrupt type, so the inject VM_EVENT will have wrong data. Let's fix this by using the interrupt parameters and not the interrupt type number. 2. We only log in kvm_s390_inject_vm, but not when coming from kvm_s390_reinject_io_int or from flic. Let's move the logging to the common __inject_io function. We also enhance the logging for delivery to match the data. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-06-10KVM: s390: provide logging for diagnose 0x500Christian Borntraeger
We might need to debug some virtio things, so better have diagnose 500 logged. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-06-10KVM: s390: turn on tx even without ctxDavid Hildenbrand
Constrained transactional execution is an addon of transactional execution. Let's enable the assist also if only TX is enabled for the guest. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-10KVM: s390: enable host-protection-interruption only with ESOPDavid Hildenbrand
host-protection-interruption control was introduced with ESOP. So let's enable it only if we have ESOP and add an explanatory comment why we can live without it. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-10KVM: s390: enable ibs only if availableDavid Hildenbrand
Let's enable interlock-and-broadcast suppression only if the facility is actually available. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-10s390/sclp: detect interlock-and-broadcast-suppression facilityDavid Hildenbrand
Let's detect that facility. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-10KVM: s390: enable PFMFI only if availableDavid Hildenbrand
Let's enable interpretation of PFMFI only if the facility is actually available. Emulation code still works in case the guest is offered EDAT-1. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-10s390/sclp: detect PFMF interpretation facilityDavid Hildenbrand
Let's detect that facility. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-10KVM: s390: enable cei only if availableDavid Hildenbrand
Let's only enable conditional-external-interruption if the facility is actually available. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-10s390/sclp: detect conditional-external-interception facilityDavid Hildenbrand
Let's detect if we have that facility. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-10KVM: s390: enable ib only if availableDavid Hildenbrand
Let's enable intervention bypass only if the facility is acutally available. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-06-10s390/sclp: detect intervention bypass facilityDavid Hildenbrand
Let's detect if we have the intervention bypass facility installed. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
generated by cgit (git 2.34.1) at 2025-09-15 12:12:06 +0000