summaryrefslogtreecommitdiff
path: root/arch/x86/kernel
AgeCommit message (Collapse)Author
2018-01-05ACPI / x86: boot: Propagate error code in acpi_gsi_to_irq()Andy Shevchenko
acpi_get_override_irq() followed by acpi_register_gsi() returns negative error code on failure. Propagate it from acpi_gsi_to_irq() to callers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [ rjw : Subject/changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-01-03Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 page table isolation fixes from Thomas Gleixner: "A couple of urgent fixes for PTI: - Fix a PTE mismatch between user and kernel visible mapping of the cpu entry area (differs vs. the GLB bit) and causes a TLB mismatch MCE on older AMD K8 machines - Fix the misplaced CR3 switch in the SYSCALL compat entry code which causes access to unmapped kernel memory resulting in double faults. - Fix the section mismatch of the cpu_tss_rw percpu storage caused by using a different mechanism for declaration and definition. - Two fixes for dumpstack which help to decode entry stack issues better - Enable PTI by default in Kconfig. We should have done that earlier, but it slipped through the cracks. - Exclude AMD from the PTI enforcement. Not necessarily a fix, but if AMD is so confident that they are not affected, then we should not burden users with the overhead" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/process: Define cpu_tss_rw in same section as declaration x86/pti: Switch to kernel CR3 at early in entry_SYSCALL_compat() x86/dumpstack: Print registers for first stack frame x86/dumpstack: Fix partial register dumps x86/pti: Make sure the user/kernel PTEs match x86/cpu, x86/pti: Do not enable PTI on AMD processors x86/pti: Enable PTI by default
2018-01-03x86/process: Define cpu_tss_rw in same section as declarationNick Desaulniers
cpu_tss_rw is declared with DECLARE_PER_CPU_PAGE_ALIGNED but then defined with DEFINE_PER_CPU_SHARED_ALIGNED leading to section mismatch warnings. Use DEFINE_PER_CPU_PAGE_ALIGNED consistently. This is necessary because it's mapped to the cpu entry area and must be page aligned. [ tglx: Massaged changelog a bit ] Fixes: 1a935bc3d4ea ("x86/entry: Move SYSENTER_stack to the beginning of struct tss_struct") Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: thomas.lendacky@amd.com Cc: Borislav Petkov <bpetkov@suse.de> Cc: tklauser@distanz.ch Cc: minipli@googlemail.com Cc: me@kylehuey.com Cc: namit@vmware.com Cc: luto@kernel.org Cc: jpoimboe@redhat.com Cc: tj@kernel.org Cc: cl@linux.com Cc: bp@suse.de Cc: thgarnie@google.com Cc: kirill.shutemov@linux.intel.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180103203954.183360-1-ndesaulniers@google.com
2018-01-03x86/dumpstack: Print registers for first stack frameJosh Poimboeuf
In the stack dump code, if the frame after the starting pt_regs is also a regs frame, the registers don't get printed. Fix that. Reported-by: Andy Lutomirski <luto@amacapital.net> Tested-by: Alexander Tsoy <alexander@tsoy.me> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toralf Förster <toralf.foerster@gmx.de> Cc: stable@vger.kernel.org Fixes: 3b3fa11bc700 ("x86/dumpstack: Print any pt_regs found on the stack") Link: http://lkml.kernel.org/r/396f84491d2f0ef64eda4217a2165f5712f6a115.1514736742.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-03x86/dumpstack: Fix partial register dumpsJosh Poimboeuf
The show_regs_safe() logic is wrong. When there's an iret stack frame, it prints the entire pt_regs -- most of which is random stack data -- instead of just the five registers at the end. show_regs_safe() is also poorly named: the on_stack() checks aren't for safety. Rename the function to show_regs_if_on_stack() and add a comment to explain why the checks are needed. These issues were introduced with the "partial register dump" feature of the following commit: b02fcf9ba121 ("x86/unwinder: Handle stack overflows more gracefully") That patch had gone through a few iterations of development, and the above issues were artifacts from a previous iteration of the patch where 'regs' pointed directly to the iret frame rather than to the (partially empty) pt_regs. Tested-by: Alexander Tsoy <alexander@tsoy.me> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toralf Förster <toralf.foerster@gmx.de> Cc: stable@vger.kernel.org Fixes: b02fcf9ba121 ("x86/unwinder: Handle stack overflows more gracefully") Link: http://lkml.kernel.org/r/5b05b8b344f59db2d3d50dbdeba92d60f2304c54.1514736742.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-03x86/cpu, x86/pti: Do not enable PTI on AMD processorsTom Lendacky
AMD processors are not subject to the types of attacks that the kernel page table isolation feature protects against. The AMD microarchitecture does not allow memory references, including speculative references, that access higher privileged data when running in a lesser privileged mode when that access would result in a page fault. Disable page table isolation by default on AMD processors by not setting the X86_BUG_CPU_INSECURE feature, which controls whether X86_FEATURE_PTI is set. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20171227054354.20369.94587.stgit@tlendack-t1.amdoffice.net
2018-01-03x86/efi: Fix kernel param add_efi_memmap regressionDave Young
'add_efi_memmap' is an early param, but do_add_efi_memmap() has no chance to run because the code path is before parse_early_param(). I believe it worked when the param was introduced but probably later some other changes caused the wrong order and nobody noticed it. Move efi_memblock_x86_reserve_range() after parse_early_param() to fix it. Signed-off-by: Dave Young <dyoung@redhat.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Bryan O'Donoghue <pure.logic@nexus-software.ie> Cc: Ge Song <ge.song@hxt-semitech.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180102172110.17018-2-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-31Merge branch 'x86/urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A couple of fixlets for x86: - Fix the ESPFIX double fault handling for 5-level pagetables - Fix the commandline parsing for 'apic=' on 32bit systems and update documentation - Make zombie stack traces reliable - Fix kexec with stack canary - Fix the delivery mode for APICs which was missed when the x86 vector management was converted to single target delivery. Caused a regression due to the broken hardware which ignores affinity settings in lowest prio delivery mode. - Unbreak modules when AMD memory encryption is enabled - Remove an unused parameter of prepare_switch_to" * 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic: Switch all APICs to Fixed delivery mode x86/apic: Update the 'apic=' description of setting APIC driver x86/apic: Avoid wrong warning when parsing 'apic=' in X86-32 case x86-32: Fix kexec with stack canary (CONFIG_CC_STACKPROTECTOR) x86: Remove unused parameter of prepare_switch_to x86/stacktrace: Make zombie stack traces reliable x86/mm: Unbreak modules that use the DMA API x86/build: Make isoimage work on Debian x86/espfix/64: Fix espfix double-fault handling on 5-level systems
2017-12-31Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 page table isolation fixes from Thomas Gleixner: "Four patches addressing the PTI fallout as discussed and debugged yesterday: - Remove stale and pointless TLB flush invocations from the hotplug code - Remove stale preempt_disable/enable from __native_flush_tlb() - Plug the memory leak in the write_ldt() error path" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ldt: Make LDT pgtable free conditional x86/ldt: Plug memory leak in error path x86/mm: Remove preempt_disable/enable() from __native_flush_tlb() x86/smpboot: Remove stale TLB flush invocations
2017-12-31Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A rather large update after the kaisered maintainer finally found time to handle regression reports. - The larger part addresses a regression caused by the x86 vector management rework. The reservation based model does not work reliably for MSI interrupts, if they cannot be masked (yes, yet another hw engineering trainwreck). The reason is that the reservation mode assigns a dummy vector when the interrupt is allocated and switches to a real vector when the interrupt is requested. If the MSI entry cannot be masked then the initialization might raise an interrupt before the interrupt is requested, which ends up as spurious interrupt and causes device malfunction and worse. The fix is to exclude MSI interrupts which do not support masking from reservation mode and assign a real vector right away. - Extend the extra lockdep class setup for nested interrupts with a class for the recently added irq_desc::request_mutex so lockdep can differeniate and does not emit false positive warnings. - A ratelimit guard for the bad irq printout so in case a bad irq comes back immediately the system does not drown in dmesg spam" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/msi, x86/vector: Prevent reservation mode for non maskable MSI genirq/irqdomain: Rename early argument of irq_domain_activate_irq() x86/vector: Use IRQD_CAN_RESERVE flag genirq: Introduce IRQD_CAN_RESERVE flag genirq/msi: Handle reactivation only on success gpio: brcmstb: Make really use of the new lockdep class genirq: Guard handle_bad_irq log messages kernel/irq: Extend lockdep class for request mutex
2017-12-31x86/ldt: Make LDT pgtable free conditionalThomas Gleixner
Andy prefers to be paranoid about the pagetable free in the error path of write_ldt(). Make it conditional and warn whenever the installment of a secondary LDT fails. Requested-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-12-31x86/ldt: Plug memory leak in error pathThomas Gleixner
The error path in write_ldt() tries to free 'old_ldt' instead of the newly allocated 'new_ldt', resulting in a memory leak. It also misses to clean up a half populated LDT pagetable, which is not a leak as it gets cleaned up when the process exits. Free both the potentially half populated LDT pagetable and the newly allocated LDT struct. This can be done unconditionally because once an LDT is mapped subsequent maps will succeed, because the PTE page is already populated and the two LDTs fit into that single page. Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Torvalds <torvalds@linuxfoundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: f55f0501cbf6 ("x86/pti: Put the LDT in its own PGD if PTI is on") Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1712311121340.1899@nanos Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-31x86/smpboot: Remove stale TLB flush invocationsThomas Gleixner
smpboot_setup_warm_reset_vector() and smpboot_restore_warm_reset_vector() invoke local_flush_tlb() for no obvious reason. Digging in history revealed that the original code in the 2.1 era added those because the code manipulated a swapper_pg_dir pagetable entry. The pagetable manipulation was removed long ago in the 2.3 timeframe, but the TLB flush invocations stayed around forever. Remove them along with the pointless pr_debug()s which come from the same 2.1 change. Reported-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Torvalds <torvalds@linuxfoundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20171230211829.586548655@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-29Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 page table isolation updates from Thomas Gleixner: "This is the final set of enabling page table isolation on x86: - Infrastructure patches for handling the extra page tables. - Patches which map the various bits and pieces which are required to get in and out of user space into the user space visible page tables. - The required changes to have CR3 switching in the entry/exit code. - Optimizations for the CR3 switching along with documentation how the ASID/PCID mechanism works. - Updates to dump pagetables to cover the user space page tables for W+X scans and extra debugfs files to analyze both the kernel and the user space visible page tables The whole functionality is compile time controlled via a config switch and can be turned on/off on the command line as well" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits) x86/ldt: Make the LDT mapping RO x86/mm/dump_pagetables: Allow dumping current pagetables x86/mm/dump_pagetables: Check user space page table for WX pages x86/mm/dump_pagetables: Add page table directory to the debugfs VFS hierarchy x86/mm/pti: Add Kconfig x86/dumpstack: Indicate in Oops whether PTI is configured and enabled x86/mm: Clarify the whole ASID/kernel PCID/user PCID naming x86/mm: Use INVPCID for __native_flush_tlb_single() x86/mm: Optimize RESTORE_CR3 x86/mm: Use/Fix PCID to optimize user/kernel switches x86/mm: Abstract switching CR3 x86/mm: Allow flushing for future ASID switches x86/pti: Map the vsyscall page if needed x86/pti: Put the LDT in its own PGD if PTI is on x86/mm/64: Make a full PGD-entry size hole in the memory map x86/events/intel/ds: Map debug buffers in cpu_entry_area x86/cpu_entry_area: Add debugstore entries to cpu_entry_area x86/mm/pti: Map ESPFIX into user space x86/mm/pti: Share entry text PMD x86/entry: Align entry text section to PMD boundary ...
2017-12-29genirq/msi, x86/vector: Prevent reservation mode for non maskable MSIThomas Gleixner
The new reservation mode for interrupts assigns a dummy vector when the interrupt is allocated and assigns a real vector when the interrupt is requested. The reservation mode prevents vector pressure when devices with a large amount of queues/interrupts are initialized, but only a minimal subset of those queues/interrupts is actually used. This mode has an issue with MSI interrupts which cannot be masked. If the driver is not careful or the hardware emits an interrupt before the device irq is requestd by the driver then the interrupt ends up on the dummy vector as a spurious interrupt which can cause malfunction of the device or in the worst case a lockup of the machine. Change the logic for the reservation mode so that the early activation of MSI interrupts checks whether: - the device is a PCI/MSI device - the reservation mode of the underlying irqdomain is activated - PCI/MSI masking is globally enabled - the PCI/MSI device uses either MSI-X, which supports masking, or MSI with the maskbit supported. If one of those conditions is false, then clear the reservation mode flag in the irq data of the interrupt and invoke irq_domain_activate_irq() with the reserve argument cleared. In the x86 vector code, clear the can_reserve flag in the vector allocation data so a subsequent free_irq() won't create the same situation again. The interrupt stays assigned to a real vector until pci_disable_msi() is invoked and all allocations are undone. Fixes: 4900be83602b ("x86/vector/msi: Switch to global reservation mode") Reported-by: Alexandru Chirvasitu <achirvasub@gmail.com> Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Alexandru Chirvasitu <achirvasub@gmail.com> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Mikael Pettersson <mikpelinux@gmail.com> Cc: Josh Poulson <jopoulso@microsoft.com> Cc: Mihai Costache <v-micos@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-pci@vger.kernel.org Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Dexuan Cui <decui@microsoft.com> Cc: Simon Xiao <sixiao@microsoft.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Jork Loeser <Jork.Loeser@microsoft.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: devel@linuxdriverproject.org Cc: KY Srinivasan <kys@microsoft.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Sakari Ailus <sakari.ailus@intel.com>, Cc: linux-media@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712291406420.1899@nanos Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712291409460.1899@nanos
2017-12-29genirq/irqdomain: Rename early argument of irq_domain_activate_irq()Thomas Gleixner
The 'early' argument of irq_domain_activate_irq() is actually used to denote reservation mode. To avoid confusion, rename it before abuse happens. No functional change. Fixes: 72491643469a ("genirq/irqdomain: Update irq_domain_ops.activate() signature") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexandru Chirvasitu <achirvasub@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Mikael Pettersson <mikpelinux@gmail.com> Cc: Josh Poulson <jopoulso@microsoft.com> Cc: Mihai Costache <v-micos@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-pci@vger.kernel.org Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Dexuan Cui <decui@microsoft.com> Cc: Simon Xiao <sixiao@microsoft.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Jork Loeser <Jork.Loeser@microsoft.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: devel@linuxdriverproject.org Cc: KY Srinivasan <kys@microsoft.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Sakari Ailus <sakari.ailus@intel.com>, Cc: linux-media@vger.kernel.org
2017-12-29x86/vector: Use IRQD_CAN_RESERVE flagThomas Gleixner
Set the new CAN_RESERVE flag when the initial reservation for an interrupt happens. The flag is used in a subsequent patch to disable reservation mode for a certain class of MSI devices. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Alexandru Chirvasitu <achirvasub@gmail.com> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Mikael Pettersson <mikpelinux@gmail.com> Cc: Josh Poulson <jopoulso@microsoft.com> Cc: Mihai Costache <v-micos@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-pci@vger.kernel.org Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Dexuan Cui <decui@microsoft.com> Cc: Simon Xiao <sixiao@microsoft.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Jork Loeser <Jork.Loeser@microsoft.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: devel@linuxdriverproject.org Cc: KY Srinivasan <kys@microsoft.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Sakari Ailus <sakari.ailus@intel.com>, Cc: linux-media@vger.kernel.org
2017-12-29x86/apic: Switch all APICs to Fixed delivery modeThomas Gleixner
Some of the APIC incarnations are operating in lowest priority delivery mode. This worked as long as the vector management code allocated the same vector on all possible CPUs for each interrupt. Lowest priority delivery mode does not necessarily respect the affinity setting and may redirect to some other online CPU. This was documented somewhere in the old code and the conversion to single target delivery missed to update the delivery mode of the affected APIC drivers which results in spurious interrupts on some of the affected CPU/Chipset combinations. Switch the APIC drivers over to Fixed delivery mode and remove all leftovers of lowest priority delivery mode. Switching to Fixed delivery mode is not a problem on these CPUs because the kernel already uses Fixed delivery mode for IPIs. The reason for this is that th SDM explicitely forbids lowest prio mode for IPIs. The reason is obvious: If the irq routing does not honor destination targets in lowest prio mode then an IPI targeted at CPU1 might end up on CPU0, which would be a fatal problem in many cases. As a consequence of this change, the apic::irq_delivery_mode field is now pointless, but this needs to be cleaned up in a separate patch. Fixes: fdba46ffb4c2 ("x86/apic: Get rid of multi CPU affinity") Reported-by: vcaputo@pengaru.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: vcaputo@pengaru.com Cc: Pavel Machek <pavel@ucw.cz> Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712281140440.1688@nanos
2017-12-28ACPI / x86: boot: Don't setup SCI on HW-reduced platformsAndy Shevchenko
As per note in 5.2.9 Fixed ACPI Description Table (FADT) chapter of ACPI specification, on HW-reduced platforma OSPM should ignore fields related to the ACPI HW register interface, one of which is SCI_INT. Follow the spec and ignore any configuration done for interrupt line defined by SCI_INT if FADT specifies a HW-reduced platform. HW-reduced platforms will still be able to use SCI in case it provides an override record in MADT table. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-12-28ACPI / x86: boot: Use INVALID_ACPI_IRQ instead of 0 for acpi_sci_override_gsiAndy Shevchenko
0 is valid hardware interrupt which might be in some cases overridden. Due to this, switch to INVALID_ACPI_IRQ to mark SCI override not set. While here, change the type of the variable from int to u32 to match the GSI type used in the rest of the code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-12-28ACPI / x86: boot: Get rid of ACPI_INVALID_GSIAndy Shevchenko
Commit 49e4b84333f3 (ACPI: Use correct IRQ when uninstalling ACPI interrupt handler) brings a new definition for invalid ACPI IRQ, i.e. INVALID_ACPI_IRQ, which is defined to 0xffffffff (or -1 for unsigned value). Get rid of a former one, which was brought in by commit 2c0a6894df19 (x86, ACPI, irq: Enhance error handling in function acpi_register_gsi()), in favour of latter. To clarify the rationale of changing from INT_MIN to ((unsigned)-1) definition consider the following: - IRQ 0 is valid one in hardware, so, better not to use it everywhere (Linux uses 0 as NO IRQ, though it's another story) - INT_MIN splits the range into two, while 0xffffffff reserves only the last item - when type casting is done in most cases 0xff, 0xffff is naturally used as a marker of invalid HW IRQ: for example PCI INT line 0xff means no IRQ assigned by BIOS Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-12-28ACPI / x86: boot: Swap variables in condition in acpi_register_gsi_ioapic()Andy Shevchenko
For better readability compare input to something considered settled down. Additionally move it to one line (while it's slightly longer 80 characters it makes readability better). No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-12-28x86/apic: Avoid wrong warning when parsing 'apic=' in X86-32 caseDou Liyang
There are two consumers of apic=: apic_set_verbosity() for setting the APIC debug level; parse_apic() for registering APIC driver by hand. X86-32 supports both of them, but sometimes, kernel issues a weird warning. eg: when kernel was booted up with 'apic=bigsmp' in command line, early_param would warn like that: ... [ 0.000000] APIC Verbosity level bigsmp not recognised use apic=verbose or apic=debug [ 0.000000] Malformed early option 'apic' ... Wrap the warning code in CONFIG_X86_64 case to avoid this. Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: peterz@infradead.org Cc: rdunlap@infradead.org Cc: corbet@lwn.net Link: https://lkml.kernel.org/r/20171204040313.24824-1-douly.fnst@cn.fujitsu.com
2017-12-27x86-32: Fix kexec with stack canary (CONFIG_CC_STACKPROTECTOR)Linus Torvalds
Commit e802a51ede91 ("x86/idt: Consolidate IDT invalidation") cleaned up and unified the IDT invalidation that existed in a couple of places. It changed no actual real code. Despite not changing any actual real code, it _did_ change code generation: by implementing the common idt_invalidate() function in archx86/kernel/idt.c, it made the use of the function in arch/x86/kernel/machine_kexec_32.c be a real function call rather than an (accidental) inlining of the function. That, in turn, exposed two issues: - in load_segments(), we had incorrectly reset all the segment registers, which then made the stack canary load (which gcc does using offset of %gs) cause a trap. Instead of %gs pointing to the stack canary, it will be the normal zero-based kernel segment, and the stack canary load will take a page fault at address 0x14. - to make this even harder to debug, we had invalidated the GDT just before calling idt_invalidate(), which meant that the fault happened with an invalid GDT, which in turn causes a triple fault and immediate reboot. Fix this by (a) not reloading the special segments in load_segments(). We currently don't do any percpu accesses (which would require %fs on x86-32) in this area, but there's no reason to think that we might not want to do them, and like %gs, it's pointless to break it. (b) doing idt_invalidate() before invalidating the GDT, to keep things at least _slightly_ more debuggable for a bit longer. Without a IDT, traps will not work. Without a GDT, traps also will not work, but neither will any segment loads etc. So in a very real sense, the GDT is even more core than the IDT. Fixes: e802a51ede91 ("x86/idt: Consolidate IDT invalidation") Reported-and-tested-by: Alexandru Chirvasitu <achirvasub@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.LFD.2.21.1712271143180.8572@i7.lan
2017-12-28Merge tag 'drm-intel-next-2017-12-22' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next - Allow internal page allocation to fail (Chris) - More improvements on logs, dumps, and trace (Chris, Michal) - Coffee Lake important fix for stolen memory (Lucas) - Continue to make GPU reset more robust as well improving selftest coverage for it (Chris) - Unifying debugfs return codes (Michal) - Using existing helper for testing obj pages (Matthew) - Organize and improve gem_request tracepoints (Lionel) - Protect DDI port to DPLL map from theoretical race (Rodrigo) - ... and consequently fixing the indentation on this DDI clk selection function (Chris) - ... and consequently properly serializing non-blocking modesets (Ville) - Add support for horizontal plane flipping on Cannonlake (Joonas) - Two Cannonlake Workarounds for better stability (Rafael) - Fix mess around PSR registers (DK) - More Coffee Lake PCI IDs (Rodrigo) - Remove CSS modifiers on pipe C of Geminilake (Krisman) - Disable all planes for load detection (Ville) - Reorg on i915 display headers (Michal) - Avoid enabling movntdqa optimization on hypervisor guest (Changbin) GVT: - more mmio switch optimization (Weinan) - cleanup i915_reg_t vs. offset usage (Zhenyu) - move write protect handler out of mmio handler (Zhenyu) * tag 'drm-intel-next-2017-12-22' of git://anongit.freedesktop.org/drm/drm-intel: (55 commits) drm/i915: Update DRIVER_DATE to 20171222 drm/i915: Show HWSP in intel_engine_dump() drm/i915: Assert that the request is on the execution queue before being removed drm/i915/execlists: Show preemption progress in GEM_TRACE drm/i915: Put all non-blocking modesets onto an ordered wq drm/i915: Disable GMBUS clock gating around GMBUS transfers on gen9+ drm/i915: Clean up the PNV bit banging vs. GMBUS clock gating w/a drm/i915: No need to power up PG2 for GMBUS on BXT drm/i915: Disable DC states around GMBUS on GLK drm/i915: Do not enable movntdqa optimization in hypervisor guest drm/i915: Dump device info at once drm/i915: Add pretty printer for runtime part of intel_device_info drm/i915: Update intel_device_info_runtime_init() parameter drm/i915: Move intel_device_info definitions to its own header drm/i915: Move opregion definitions to dedicated intel_opregion.h drm/i915: Move display related definitions to dedicated header drm/i915: Move some utility functions to i915_util.h drm/i915/gvt: move write protect handler out of mmio emulation function drm/i915/gvt: cleanup usage for typed mmio reg vs. offset drm/i915/gvt: Fix pipe A enable as default for vgpu ...
2017-12-23x86/ldt: Make the LDT mapping ROThomas Gleixner
Now that the LDT mapping is in a known area when PAGE_TABLE_ISOLATION is enabled its a primary target for attacks, if a user space interface fails to validate a write address correctly. That can never happen, right? The SDM states: If the segment descriptors in the GDT or an LDT are placed in ROM, the processor can enter an indefinite loop if software or the processor attempts to update (write to) the ROM-based segment descriptors. To prevent this problem, set the accessed bits for all segment descriptors placed in a ROM. Also, remove operating-system or executive code that attempts to modify segment descriptors located in ROM. So its a valid approach to set the ACCESS bit when setting up the LDT entry and to map the table RO. Fixup the selftest so it can handle that new mode. Remove the manual ACCESS bit setter in set_tls_desc() as this is now pointless. Folded the patch from Peter Ziljstra. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-23x86/dumpstack: Indicate in Oops whether PTI is configured and enabledVlastimil Babka
CONFIG_PAGE_TABLE_ISOLATION is relatively new and intrusive feature that may still have some corner cases which could take some time to manifest and be fixed. It would be useful to have Oops messages indicate whether it was enabled for building the kernel, and whether it was disabled during boot. Example of fully enabled: Oops: 0001 [#1] SMP PTI Example of enabled during build, but disabled during boot: Oops: 0001 [#1] SMP NOPTI We can decide to remove this after the feature has been tested in the field long enough. [ tglx: Made it use boot_cpu_has() as requested by Borislav ] Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Eduardo Valentin <eduval@amazon.com> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: bpetkov@suse.de Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: jkosina@suse.cz Cc: keescook@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-23x86/mm: Use/Fix PCID to optimize user/kernel switchesPeter Zijlstra
We can use PCID to retain the TLBs across CR3 switches; including those now part of the user/kernel switch. This increases performance of kernel entry/exit at the cost of more expensive/complicated TLB flushing. Now that we have two address spaces, one for kernel and one for user space, we need two PCIDs per mm. We use the top PCID bit to indicate a user PCID (just like we use the PFN LSB for the PGD). Since we do TLB invalidation from kernel space, the existing code will only invalidate the kernel PCID, we augment that by marking the corresponding user PCID invalid, and upon switching back to userspace, use a flushing CR3 write for the switch. In order to access the user_pcid_flush_mask we use PER_CPU storage, which means the previously established SWAPGS vs CR3 ordering is now mandatory and required. Having to do this memory access does require additional registers, most sites have a functioning stack and we can spill one (RAX), sites without functional stack need to otherwise provide the second scratch register. Note: PCID is generally available on Intel Sandybridge and later CPUs. Note: Up until this point TLB flushing was broken in this series. Based-on-code-from: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-23x86/pti: Put the LDT in its own PGD if PTI is onAndy Lutomirski
With PTI enabled, the LDT must be mapped in the usermode tables somewhere. The LDT is per process, i.e. per mm. An earlier approach mapped the LDT on context switch into a fixmap area, but that's a big overhead and exhausted the fixmap space when NR_CPUS got big. Take advantage of the fact that there is an address space hole which provides a completely unused pgd. Use this pgd to manage per-mm LDT mappings. This has a down side: the LDT isn't (currently) randomized, and an attack that can write the LDT is instant root due to call gates (thanks, AMD, for leaving call gates in AMD64 but designing them wrong so they're only useful for exploits). This can be mitigated by making the LDT read-only or randomizing the mapping, either of which is strightforward on top of this patch. This will significantly slow down LDT users, but that shouldn't matter for important workloads -- the LDT is only used by DOSEMU(2), Wine, and very old libc implementations. [ tglx: Cleaned it up. ] Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@chromium.org> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-23x86/entry: Align entry text section to PMD boundaryThomas Gleixner
The (irq)entry text must be visible in the user space page tables. To allow simple PMD based sharing, make the entry text PMD aligned. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-23x86/mm/pti: Force entry through trampoline when PTI activeThomas Gleixner
Force the entry through the trampoline only when PTI is active. Otherwise go through the normal entry code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-23x86/mm/pti: Allocate a separate user PGDDave Hansen
Kernel page table isolation requires to have two PGDs. One for the kernel, which contains the full kernel mapping plus the user space mapping and one for user space which contains the user space mappings and the minimal set of kernel mappings which are required by the architecture to be able to transition from and to user space. Add the necessary preliminaries. [ tglx: Split out from the big kaiser dump. EFI fixup from Kirill ] Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-23x86/cpufeatures: Add X86_BUG_CPU_INSECUREThomas Gleixner
Many x86 CPUs leak information to user space due to missing isolation of user space and kernel space page tables. There are many well documented ways to exploit that. The upcoming software migitation of isolating the user and kernel space page tables needs a misfeature flag so code can be made runtime conditional. Add the BUG bits which indicates that the CPU is affected and add a feature bit which indicates that the software migitation is enabled. Assume for now that _ALL_ x86 CPUs are affected by this. Exceptions can be made later. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-23Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 PTI preparatory patches from Thomas Gleixner: "Todays Advent calendar window contains twentyfour easy to digest patches. The original plan was to have twenty three matching the date, but a late fixup made that moot. - Move the cpu_entry_area mapping out of the fixmap into a separate address space. That's necessary because the fixmap becomes too big with NRCPUS=8192 and this caused already subtle and hard to diagnose failures. The top most patch is fresh from today and cures a brain slip of that tall grumpy german greybeard, who ignored the intricacies of 32bit wraparounds. - Limit the number of CPUs on 32bit to 64. That's insane big already, but at least it's small enough to prevent address space issues with the cpu_entry_area map, which have been observed and debugged with the fixmap code - A few TLB flush fixes in various places plus documentation which of the TLB functions should be used for what. - Rename the SYSENTER stack to CPU_ENTRY_AREA stack as it is used for more than sysenter now and keeping the name makes backtraces confusing. - Prevent LDT inheritance on exec() by moving it to arch_dup_mmap(), which is only invoked on fork(). - Make vysycall more robust. - A few fixes and cleanups of the debug_pagetables code. Check PAGE_PRESENT instead of checking the PTE for 0 and a cleanup of the C89 initialization of the address hint array which already was out of sync with the index enums. - Move the ESPFIX init to a different place to prepare for PTI. - Several code moves with no functional change to make PTI integration simpler and header files less convoluted. - Documentation fixes and clarifications" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) x86/cpu_entry_area: Prevent wraparound in setup_cpu_entry_area_ptes() on 32bit init: Invoke init_espfix_bsp() from mm_init() x86/cpu_entry_area: Move it out of the fixmap x86/cpu_entry_area: Move it to a separate unit x86/mm: Create asm/invpcid.h x86/mm: Put MMU to hardware ASID translation in one place x86/mm: Remove hard-coded ASID limit checks x86/mm: Move the CR3 construction functions to tlbflush.h x86/mm: Add comments to clarify which TLB-flush functions are supposed to flush what x86/mm: Remove superfluous barriers x86/mm: Use __flush_tlb_one() for kernel memory x86/microcode: Dont abuse the TLB-flush interface x86/uv: Use the right TLB-flush API x86/entry: Rename SYSENTER_stack to CPU_ENTRY_AREA_entry_stack x86/doc: Remove obvious weirdnesses from the x86 MM layout documentation x86/mm/64: Improve the memory map documentation x86/ldt: Prevent LDT inheritance on exec x86/ldt: Rework locking arch, mm: Allow arch_dup_mmap() to fail x86/vsyscall/64: Warn and fail vsyscall emulation in NATIVE mode ...
2017-12-22init: Invoke init_espfix_bsp() from mm_init()Thomas Gleixner
init_espfix_bsp() needs to be invoked before the page table isolation initialization. Move it into mm_init() which is the place where pti_init() will be added. While at it get rid of the #ifdeffery and provide proper stub functions. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-22x86/cpu_entry_area: Move it out of the fixmapThomas Gleixner
Put the cpu_entry_area into a separate P4D entry. The fixmap gets too big and 0-day already hit a case where the fixmap PTEs were cleared by cleanup_highmap(). Aside of that the fixmap API is a pain as it's all backwards. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-22x86/cpu_entry_area: Move it to a separate unitThomas Gleixner
Separate the cpu_entry_area code out of cpu/common.c and the fixmap. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-22x86/microcode: Dont abuse the TLB-flush interfacePeter Zijlstra
Commit: ec400ddeff20 ("x86/microcode_intel_early.c: Early update ucode on Intel's CPU") ... grubbed into tlbflush internals without coherent explanation. Since it says its a precaution and the SDM doesn't mention anything like this, take it out back. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: fenghua.yu@intel.com Cc: hughd@google.com Cc: keescook@google.com Cc: linux-mm@kvack.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-22x86/entry: Rename SYSENTER_stack to CPU_ENTRY_AREA_entry_stackDave Hansen
If the kernel oopses while on the trampoline stack, it will print "<SYSENTER>" even if SYSENTER is not involved. That is rather confusing. The "SYSENTER" stack is used for a lot more than SYSENTER now. Give it a better string to display in stack dumps, and rename the kernel code to match. Also move the 32-bit code over to the new naming even though it still uses the entry stack only for SYSENTER. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-22x86/ldt: Prevent LDT inheritance on execThomas Gleixner
The LDT is inherited across fork() or exec(), but that makes no sense at all because exec() is supposed to start the process clean. The reason why this happens is that init_new_context_ldt() is called from init_new_context() which obviously needs to be called for both fork() and exec(). It would be surprising if anything relies on that behaviour, so it seems to be safe to remove that misfeature. Split the context initialization into two parts. Clear the LDT pointer and initialize the mutex from the general context init and move the LDT duplication to arch_dup_mmap() which is only called on fork(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: dan.j.williams@intel.com Cc: hughd@google.com Cc: keescook@google.com Cc: kirill.shutemov@linux.intel.com Cc: linux-mm@kvack.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-22x86/ldt: Rework lockingPeter Zijlstra
The LDT is duplicated on fork() and on exec(), which is wrong as exec() should start from a clean state, i.e. without LDT. To fix this the LDT duplication code will be moved into arch_dup_mmap() which is only called for fork(). This introduces a locking problem. arch_dup_mmap() holds mmap_sem of the parent process, but the LDT duplication code needs to acquire mm->context.lock to access the LDT data safely, which is the reverse lock order of write_ldt() where mmap_sem nests into context.lock. Solve this by introducing a new rw semaphore which serializes the read/write_ldt() syscall operations and use context.lock to protect the actual installment of the LDT descriptor. So context.lock stabilizes mm->context.ldt and can nest inside of the new semaphore or mmap_sem. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: dan.j.williams@intel.com Cc: hughd@google.com Cc: keescook@google.com Cc: kirill.shutemov@linux.intel.com Cc: linux-mm@kvack.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-21Merge tag 'drm-intel-next-2017-12-14' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next - Fix documentation build issues (Randy, Markus) - Fix timestamp frequency calculation for perf on CNL (Lionel) - New DMC firmware for Skylake (Anusha) - GTT flush fixes and other GGTT write track and refactors (Chris) - Taint kernel when GPU reset fails (Chris) - Display workarounds organization (Lucas) - GuC and HuC initialization clean-up and fixes (Michal) - Other fixes around GuC submission (Michal) - Execlist clean-ups like caching ELSP reg offset and improving log readability (Chri\ s) - Many other improvements on our logs and dumps (Chris) - Restore GT performance in headless mode with DMC loaded (Tvrtko) - Stop updating legacy fb parameters since FBC is not using anymore (Daniel) - More selftest improvements (Chris) - Preemption fixes and improvements (Chris) - x86/early-quirks improvements for Intel graphics stolen memory. (Joonas, Matthew) - Other improvements on Stolen Memory code to be resource centric. (Matthew) - Improvements and fixes on fence allocation/release (Chris). GVT: - fixes for two coverity scan errors (Colin) - mmio switch code refine (Changbin) - more virtual display dmabuf fixes (Tina/Gustavo) - misc cleanups (Pei) - VFIO mdev display dmabuf interface and gvt support (Tina) - VFIO mdev opregion support/fixes (Tina/Xiong/Chris) - workload scheduling optimization (Changbin) - preemption fix and temporal workaround (Zhenyu) - and misc fixes after refactor (Chris) * tag 'drm-intel-next-2017-12-14' of git://anongit.freedesktop.org/drm/drm-intel: (87 commits) drm/i915: Update DRIVER_DATE to 20171214 drm/i915: properly init lockdep class drm/i915: Show engine state when hangcheck detects a stall drm/i915: make CS frequency read support missing more obvious drm/i915/guc: Extract doorbell verification into a function drm/i915/guc: Extract clients allocation to submission_init drm/i915/guc: Extract doorbell creation from client allocation drm/i915/guc: Call invalidate after changing the vfunc drm/i915/guc: Extract guc_init from guc_init_hw drm/i915/guc: Move GuC workqueue allocations outside of the mutex drm/i915/guc: Move shared data allocation away from submission path drm/i915: Unwind i915_gem_init() failure drm/i915: Ratelimit request allocation under oom drm/i915: Allow fence allocations to fail drm/i915: Mark up potential allocation paths within i915_sw_fence as might_sleep drm/i915: Don't check #active_requests from i915_gem_wait_for_idle() drm/i915/fence: Use rcu to defer freeing of irq_work drm/i915: Dump the engine state before declaring wedged from wait_for_engines() drm/i915: Bump timeout for wait_for_engines() drm/i915: Downgrade misleading "Memory usable" message ...
2017-12-19x86/stacktrace: Make zombie stack traces reliableJosh Poimboeuf
Commit: 1959a60182f4 ("x86/dumpstack: Pin the target stack when dumping it") changed the behavior of stack traces for zombies. Before that commit, /proc/<pid>/stack reported the last execution path of the zombie before it died: [<ffffffff8105b877>] do_exit+0x6f7/0xa80 [<ffffffff8105bc79>] do_group_exit+0x39/0xa0 [<ffffffff8105bcf0>] __wake_up_parent+0x0/0x30 [<ffffffff8152dd09>] system_call_fastpath+0x16/0x1b [<00007fd128f9c4f9>] 0x7fd128f9c4f9 [<ffffffffffffffff>] 0xffffffffffffffff After the commit, it just reports an empty stack trace. The new behavior is actually probably more correct. If the stack refcount has gone down to zero, then the task has already gone through do_exit() and isn't going to run anymore. The stack could be freed at any time and is basically gone, so reporting an empty stack makes sense. However, save_stack_trace_tsk_reliable() treats such a missing stack condition as an error. That can cause livepatch transition stalls if there are any unreaped zombies. Instead, just treat it as a reliable, empty stack. Reported-and-tested-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Fixes: af085d9084b4 ("stacktrace/x86: add function for detecting reliable stack traces") Link: http://lkml.kernel.org/r/e4b09e630e99d0c1080528f0821fc9d9dbaeea82.1513631620.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-18Merge branch 'WIP.x86-pti.entry-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 syscall entry code changes for PTI from Ingo Molnar: "The main changes here are Andy Lutomirski's changes to switch the x86-64 entry code to use the 'per CPU entry trampoline stack'. This, besides helping fix KASLR leaks (the pending Page Table Isolation (PTI) work), also robustifies the x86 entry code" * 'WIP.x86-pti.entry-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits) x86/cpufeatures: Make CPU bugs sticky x86/paravirt: Provide a way to check for hypervisors x86/paravirt: Dont patch flush_tlb_single x86/entry/64: Make cpu_entry_area.tss read-only x86/entry: Clean up the SYSENTER_stack code x86/entry/64: Remove the SYSENTER stack canary x86/entry/64: Move the IST stacks into struct cpu_entry_area x86/entry/64: Create a per-CPU SYSCALL entry trampoline x86/entry/64: Return to userspace from the trampoline stack x86/entry/64: Use a per-CPU trampoline stack for IDT entries x86/espfix/64: Stop assuming that pt_regs is on the entry stack x86/entry/64: Separate cpu_current_top_of_stack from TSS.sp0 x86/entry: Remap the TSS into the CPU entry area x86/entry: Move SYSENTER_stack to the beginning of struct tss_struct x86/dumpstack: Handle stack overflow on all stacks x86/entry: Fix assumptions that the HW TSS is at the beginning of cpu_tss x86/kasan/64: Teach KASAN about the cpu_entry_area x86/mm/fixmap: Generalize the GDT fixmap mechanism, introduce struct cpu_entry_area x86/entry/gdt: Put per-CPU GDT remaps in ascending order x86/dumpstack: Add get_stack_info() support for the SYSENTER stack ...
2017-12-18x86/MCE: Make correctable error detection look at the Deferred bitYazen Ghannam
AMD systems may log Deferred errors. These are errors that are uncorrected but which do not need immediate action. The MCA_STATUS[UC] bit may not be set for Deferred errors. Flag the error as not correctable when MCA_STATUS[Deferred] is set and do not feed it into the Correctable Errors Collector. [ bp: Massage commit message. ] Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20171212165143.27475-1-Yazen.Ghannam@amd.com
2017-12-18x86/MCE: Report only DRAM ECC as memory errors on AMD systemsYazen Ghannam
The MCA_STATUS[ErrorCodeExt] field is very bank type specific. We currently check if the ErrorCodeExt value is 0x0 or 0x8 in mce_is_memory_error(), but we don't check the bank number. This means that we could flag non-memory errors as memory errors. We know that we want to flag DRAM ECC errors as memory errors, so let's do those cases first. We can add more cases later when needed. Define a wrapper function in mce_amd.c so we can use SMCA enums. [ bp: Remove brackets around return statements. ] Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20171207203955.118171-2-Yazen.Ghannam@amd.com
2017-12-18x86/MCE/AMD: Define a function to get SMCA bank typeYazen Ghannam
Scalable MCA systems have various types of banks. The bank's type can determine how we handle errors from it. For example, if a bank represents a UMC (Unified Memory Controller) then we will need to convert its address from a normalized address to a system physical address before handling the error. [ bp: Verify m->bank is within range and use bank pointer. ] Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20171207203955.118171-1-Yazen.Ghannam@amd.com
2017-12-18Merge tag 'v4.15-rc4' into perf/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-17x86/cpufeatures: Make CPU bugs stickyThomas Gleixner
There is currently no way to force CPU bug bits like CPU feature bits. That makes it impossible to set a bug bit once at boot and have it stick for all upcoming CPUs. Extend the force set/clear arrays to handle bug bits as well. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Link: https://lkml.kernel.org/r/20171204150606.992156574@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-17x86/paravirt: Dont patch flush_tlb_singleThomas Gleixner
native_flush_tlb_single() will be changed with the upcoming PAGE_TABLE_ISOLATION feature. This requires to have more code in there than INVLPG. Remove the paravirt patching for it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Juergen Gross <jgross@suse.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rik van Riel <riel@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Cc: linux-mm@kvack.org Cc: michael.schwarz@iaik.tugraz.at Cc: moritz.lipp@iaik.tugraz.at Cc: richard.fellner@student.tugraz.at Link: https://lkml.kernel.org/r/20171204150606.828111617@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>