| Age | Commit message (Collapse) | Author |
|---|
|
Sometimes, a processor might execute an instruction while another
processor is updating the page tables for that instruction's code page,
but before the TLB shootdown completes. The interesting case happens
if the page is in the TLB.
In general, the processor will succeed in executing the instruction and
nothing bad happens. However, what if the instruction is an MMIO access?
If *that* happens, KVM invokes the emulator, and the emulator gets the
updated page tables. If the update side had marked the code page as non
present, the page table walk then will fail and so will x86_decode_insn.
Unfortunately, even though kvm_fetch_guest_virt is correctly returning
X86EMUL_PROPAGATE_FAULT, x86_decode_insn's caller treats the failure as
a fatal error if the instruction cannot simply be reexecuted (as is the
case for MMIO). And this in fact happened sometimes when rebooting
Windows 2012r2 guests. Just checking ctxt->have_exception and injecting
the exception if true is enough to fix the case.
Thanks to Eduardo Habkost for helping in the debugging of this issue.
Reported-by: Yanan Fu <yfu@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
Some guests use these unhandled MSRs very frequently.
This cause dmesg to be populated with lots of aggregated messages on
usage of ignored MSRs. As ignore_msrs=true means that the user is
well-aware his guest use ignored MSRs, allow to also disable the
prints on their usage.
An example of such guest is ESXi which tends to access a lot to MSR
0x34 (MSR_SMI_COUNT) very frequently.
In addition, we have observed this to cause unnecessary delays to
guest execution. Such an example is ESXi which experience networking
delays in it's guests (L2 guests) because of these prints (even when
prints are rate-limited). This can easily be reproduced by pinging
from one L2 guest to another. Once in a while, a peak in ping RTT
will be observed. Removing these unhandled MSR prints solves the
issue.
Because these prints can help diagnose issues with guests,
this commit only suppress them by a module parameter instead of
removing them from code entirely.
Signed-off-by: Eyal Moscovici <eyal.moscovici@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[Changed suppress_ignore_msrs_prints to report_ignored_msrs - Radim]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
Commit 9d643f63128b ("KVM: x86: avoid large stack allocations in
em_fxrstor") optimize the stack size, but introduced a guest memory access
which might sleep while in atomic.
Fix it by introducing, again, a second fxregs_state. Try to avoid
large stacks by using noinline. Add some helpful comments.
Reported by syzbot:
in_atomic(): 1, irqs_disabled(): 0, pid: 2909, name: syzkaller879109
2 locks held by syzkaller879109/2909:
#0: (&vcpu->mutex){+.+.}, at: [<ffffffff8106222c>] vcpu_load+0x1c/0x70
arch/x86/kvm/../../../virt/kvm/kvm_main.c:154
#1: (&kvm->srcu){....}, at: [<ffffffff810dd162>] vcpu_enter_guest
arch/x86/kvm/x86.c:6983 [inline]
#1: (&kvm->srcu){....}, at: [<ffffffff810dd162>] vcpu_run
arch/x86/kvm/x86.c:7061 [inline]
#1: (&kvm->srcu){....}, at: [<ffffffff810dd162>]
kvm_arch_vcpu_ioctl_run+0x1bc2/0x58b0 arch/x86/kvm/x86.c:7222
CPU: 1 PID: 2909 Comm: syzkaller879109 Not tainted 4.13.0-rc4-next-20170811
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:16 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:52
___might_sleep+0x2b2/0x470 kernel/sched/core.c:6014
__might_sleep+0x95/0x190 kernel/sched/core.c:5967
__might_fault+0xab/0x1d0 mm/memory.c:4383
__copy_from_user include/linux/uaccess.h:71 [inline]
__kvm_read_guest_page+0x58/0xa0
arch/x86/kvm/../../../virt/kvm/kvm_main.c:1771
kvm_vcpu_read_guest_page+0x44/0x60
arch/x86/kvm/../../../virt/kvm/kvm_main.c:1791
kvm_read_guest_virt_helper+0x76/0x140 arch/x86/kvm/x86.c:4407
kvm_read_guest_virt_system+0x3c/0x50 arch/x86/kvm/x86.c:4466
segmented_read_std+0x10c/0x180 arch/x86/kvm/emulate.c:819
em_fxrstor+0x27b/0x410 arch/x86/kvm/emulate.c:4022
x86_emulate_insn+0x55d/0x3c50 arch/x86/kvm/emulate.c:5471
x86_emulate_instruction+0x411/0x1ca0 arch/x86/kvm/x86.c:5698
kvm_mmu_page_fault+0x18b/0x2c0 arch/x86/kvm/mmu.c:4854
handle_ept_violation+0x1fc/0x5e0 arch/x86/kvm/vmx.c:6400
vmx_handle_exit+0x281/0x1ab0 arch/x86/kvm/vmx.c:8718
vcpu_enter_guest arch/x86/kvm/x86.c:6999 [inline]
vcpu_run arch/x86/kvm/x86.c:7061 [inline]
kvm_arch_vcpu_ioctl_run+0x1cee/0x58b0 arch/x86/kvm/x86.c:7222
kvm_vcpu_ioctl+0x64c/0x1010 arch/x86/kvm/../../../virt/kvm/kvm_main.c:2591
vfs_ioctl fs/ioctl.c:45 [inline]
do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685
SYSC_ioctl fs/ioctl.c:700 [inline]
SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691
entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x437fc9
RSP: 002b:00007ffc7b4d5ab8 EFLAGS: 00000206 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000004002b0 RCX: 0000000000437fc9
RDX: 0000000000000000 RSI: 000000000000ae80 RDI: 0000000000000005
RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000020ae8000
R10: 0000000000009120 R11: 0000000000000206 R12: 0000000000000000
R13: 0000000000000004 R14: 0000000000000004 R15: 0000000020077000
Fixes: 9d643f63128b ("KVM: x86: avoid large stack allocations in em_fxrstor")
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
Commit 4f350c6dbcb (kvm: nVMX: Handle deferred early VMLAUNCH/VMRESUME failure
properly) can result in L1(run kvm-unit-tests/run_tests.sh vmx_controls in L1)
null pointer deference and also L0 calltrace when EPT=0 on both L0 and L1.
In L1:
BUG: unable to handle kernel paging request at ffffffffc015bf8f
IP: vmx_vcpu_run+0x202/0x510 [kvm_intel]
PGD 146e13067 P4D 146e13067 PUD 146e15067 PMD 3d2686067 PTE 3d4af9161
Oops: 0003 [#1] PREEMPT SMP
CPU: 2 PID: 1798 Comm: qemu-system-x86 Not tainted 4.14.0-rc4+ #6
RIP: 0010:vmx_vcpu_run+0x202/0x510 [kvm_intel]
Call Trace:
WARNING: kernel stack frame pointer at ffffb86f4988bc18 in qemu-system-x86:1798 has bad value 0000000000000002
In L0:
-----------[ cut here ]------------
WARNING: CPU: 6 PID: 4460 at /home/kernel/linux/arch/x86/kvm//vmx.c:9845 vmx_inject_page_fault_nested+0x130/0x140 [kvm_intel]
CPU: 6 PID: 4460 Comm: qemu-system-x86 Tainted: G OE 4.14.0-rc7+ #25
RIP: 0010:vmx_inject_page_fault_nested+0x130/0x140 [kvm_intel]
Call Trace:
paging64_page_fault+0x500/0xde0 [kvm]
? paging32_gva_to_gpa_nested+0x120/0x120 [kvm]
? nonpaging_page_fault+0x3b0/0x3b0 [kvm]
? __asan_storeN+0x12/0x20
? paging64_gva_to_gpa+0xb0/0x120 [kvm]
? paging64_walk_addr_generic+0x11a0/0x11a0 [kvm]
? lock_acquire+0x2c0/0x2c0
? vmx_read_guest_seg_ar+0x97/0x100 [kvm_intel]
? vmx_get_segment+0x2a6/0x310 [kvm_intel]
? sched_clock+0x1f/0x30
? check_chain_key+0x137/0x1e0
? __lock_acquire+0x83c/0x2420
? kvm_multiple_exception+0xf2/0x220 [kvm]
? debug_check_no_locks_freed+0x240/0x240
? debug_smp_processor_id+0x17/0x20
? __lock_is_held+0x9e/0x100
kvm_mmu_page_fault+0x90/0x180 [kvm]
kvm_handle_page_fault+0x15c/0x310 [kvm]
? __lock_is_held+0x9e/0x100
handle_exception+0x3c7/0x4d0 [kvm_intel]
vmx_handle_exit+0x103/0x1010 [kvm_intel]
? kvm_arch_vcpu_ioctl_run+0x1628/0x2e20 [kvm]
The commit avoids to load host state of vmcs12 as vmcs01's guest state
since vmcs12 is not modified (except for the VM-instruction error field)
if the checking of vmcs control area fails. However, the mmu context is
switched to nested mmu in prepare_vmcs02() and it will not be reloaded
since load_vmcs12_host_state() is skipped when nested VMLAUNCH/VMRESUME
fails. This patch fixes it by reloading mmu context when nested
VMLAUNCH/VMRESUME fails.
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
According to the SDM, if the "load IA32_BNDCFGS" VM-entry controls is 1, the
following checks are performed on the field for the IA32_BNDCFGS MSR:
- Bits reserved in the IA32_BNDCFGS MSR must be 0.
- The linear address in bits 63:12 must be canonical.
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
Pedro reported:
During tests that we conducted on KVM, we noticed that executing a "PUSH %ES"
instruction under KVM produces different results on both memory and the SP
register depending on whether EPT support is enabled. With EPT the SP is
reduced by 4 bytes (and the written value is 0-padded) but without EPT support
it is only reduced by 2 bytes. The difference can be observed when the CS.DB
field is 1 (32-bit) but not when it's 0 (16-bit).
The internal segment descriptor cache exist even in real/vm8096 mode. The CS.D
also should be respected instead of just default operand/address-size/66H
prefix/67H prefix during instruction decoding. This patch fixes it by also
adjusting operand/address-size according to CS.D.
Reported-by: Pedro Fonseca <pfonseca@cs.washington.edu>
Tested-by: Pedro Fonseca <pfonseca@cs.washington.edu>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Pedro Fonseca <pfonseca@cs.washington.edu>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
In case of instruction-decode failure or emulation failure,
x86_emulate_instruction() will call reexecute_instruction() which will
attempt to use the cr2 value passed to x86_emulate_instruction().
However, when x86_emulate_instruction() is called from
emulate_instruction(), cr2 is not passed (passed as 0) and therefore
it doesn't make sense to execute reexecute_instruction() logic at all.
Fixes: 51d8b66199e9 ("KVM: cleanup emulate_instruction")
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
On this case, handle_emulation_failure() fills kvm_run with
internal-error information which it expects to be delivered
to user-mode for further processing.
However, the code reports a wrong return-value which makes KVM to never
return to user-mode on this scenario.
Fixes: 6d77dbfc88e3 ("KVM: inject #UD if instruction emulation fails and exit to
userspace")
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
Instruction emulation after trapping a #UD exception can result in an
MMIO access, for example when emulating a MOVBE on a processor that
doesn't support the instruction. In this case, the #UD vmexit handler
must exit to user mode, but there wasn't any code to do so. Add it for
both VMX and SVM.
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
When running L2, #UD should be intercepted by L1 or just forwarded
directly to L2. It should not reach L0 x86 emulator.
Therefore, set intercept for #UD only based on L1 exception-bitmap.
Also add WARN_ON_ONCE() on L0 #UD intercept handlers to make sure
it is never reached while running L2.
This improves commit ae1f57670703 ("KVM: nVMX: Do not emulate #UD while
in guest mode") by removing an unnecessary exit from L2 to L0 on #UD
when L1 doesn't intercept it.
In addition, SVM L0 #UD intercept handler doesn't handle correctly the
case it is raised from L2. In this case, it should forward the #UD to
guest instead of x86 emulator. As done in VMX #UD intercept handler.
This commit fixes this issue as-well.
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
When guest passes KVM it's pvclock-page GPA via WRMSR to
MSR_KVM_SYSTEM_TIME / MSR_KVM_SYSTEM_TIME_NEW, KVM don't initialize
pvclock-page to some start-values. It just requests a clock-update which
will happen before entering to guest.
The clock-update logic will call kvm_setup_pvclock_page() to update the
pvclock-page with info. However, kvm_setup_pvclock_page() *wrongly*
assumes that the version-field is initialized to an even number. This is
wrong because at first-time write, field could be any-value.
Fix simply makes sure that if first-time version-field is odd, increment
it once more to make it even and only then start standard logic.
This follows same logic as done in other pvclock shared-pages (See
kvm_write_wall_clock() and record_steal_time()).
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
To simplify testing of these rarely used code paths, add a module parameter
that turns it on. One eventinj.flat test (NMI after iret) fails when
loading kvm_intel with vnmi=0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
This is more or less a revert of commit 2c82878b0cb3 ("KVM: VMX: require
virtual NMI support", 2017-03-27); it turns out that Core 2 Duo machines
only had virtual NMIs in some SKUs.
The revert is not trivial because in the meanwhile there have been several
fixes to nested NMI injection. Therefore, the entire vNMI state is moved
to struct loaded_vmcs.
Another change compared to before the patch is a simplification here:
if (unlikely(!cpu_has_virtual_nmis() && vmx->soft_vnmi_blocked &&
!(is_guest_mode(vcpu) && nested_cpu_has_virtual_nmis(
get_vmcs12(vcpu))))) {
The final condition here is always true (because nested_cpu_has_virtual_nmis
is always false) and is removed.
Fixes: 2c82878b0cb38fd516fd612c67852a6bbf282003
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1490803
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
For many years some users of assigned devices have reported worse
performance on AMD processors with NPT than on AMD without NPT,
Intel or bare metal.
The reason turned out to be that SVM is discarding the guest PAT
setting and uses the default (PA0=PA4=WB, PA1=PA5=WT, PA2=PA6=UC-,
PA3=UC). The guest might be using a different setting, and
especially might want write combining but isn't getting it
(instead getting slow UC or UC- accesses).
Thanks a lot to geoff@hostfission.com for noticing the relation
to the g_pat setting. The patch has been tested also by a bunch
of people on VFIO users forums.
Fixes: 709ddebf81cb40e3c36c6109a7892e8b93a09464
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=196409
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Nick Sarnie <commendsarnex@gmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
Pull KVM updates from Radim Krčmář:
"First batch of KVM changes for 4.15
Common:
- Python 3 support in kvm_stat
- Accounting of slabs to kmemcg
ARM:
- Optimized arch timer handling for KVM/ARM
- Improvements to the VGIC ITS code and introduction of an ITS reset
ioctl
- Unification of the 32-bit fault injection logic
- More exact external abort matching logic
PPC:
- Support for running hashed page table (HPT) MMU mode on a host that
is using the radix MMU mode; single threaded mode on POWER 9 is
added as a pre-requisite
- Resolution of merge conflicts with the last second 4.14 HPT fixes
- Fixes and cleanups
s390:
- Some initial preparation patches for exitless interrupts and crypto
- New capability for AIS migration
- Fixes
x86:
- Improved emulation of LAPIC timer mode changes, MCi_STATUS MSRs,
and after-reset state
- Refined dependencies for VMX features
- Fixes for nested SMI injection
- A lot of cleanups"
* tag 'kvm-4.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (89 commits)
KVM: s390: provide a capability for AIS state migration
KVM: s390: clear_io_irq() requests are not expected for adapter interrupts
KVM: s390: abstract conversion between isc and enum irq_types
KVM: s390: vsie: use common code functions for pinning
KVM: s390: SIE considerations for AP Queue virtualization
KVM: s390: document memory ordering for kvm_s390_vcpu_wakeup
KVM: PPC: Book3S HV: Cosmetic post-merge cleanups
KVM: arm/arm64: fix the incompatible matching for external abort
KVM: arm/arm64: Unify 32bit fault injection
KVM: arm/arm64: vgic-its: Implement KVM_DEV_ARM_ITS_CTRL_RESET
KVM: arm/arm64: Document KVM_DEV_ARM_ITS_CTRL_RESET
KVM: arm/arm64: vgic-its: Free caches when GITS_BASER Valid bit is cleared
KVM: arm/arm64: vgic-its: New helper functions to free the caches
KVM: arm/arm64: vgic-its: Remove kvm_its_unmap_device
arm/arm64: KVM: Load the timer state when enabling the timer
KVM: arm/arm64: Rework kvm_timer_should_fire
KVM: arm/arm64: Get rid of kvm_timer_flush_hwstate
KVM: arm/arm64: Avoid phys timer emulation in vcpu entry/exit
KVM: arm/arm64: Move phys_timer_emulate function
KVM: arm/arm64: Use kvm_arm_timer_set/get_reg for guest register traps
...
|
|
Conflicts:
include/linux/compiler-clang.h
include/linux/compiler-gcc.h
include/linux/compiler-intel.h
include/uapi/linux/stddef.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Pull KVM fixes from Paolo Bonzini:
"Fixes for interrupt controller emulation in ARM/ARM64 and x86, plus a
one-liner x86 KVM guest fix"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Update APICv on APIC reset
KVM: VMX: Do not fully reset PI descriptor on vCPU reset
kvm: Return -ENODEV from update_persistent_clock
KVM: arm/arm64: vgic-its: Check GITS_BASER Valid bit before saving tables
KVM: arm/arm64: vgic-its: Check CBASER/BASER validity before enabling the ITS
KVM: arm/arm64: vgic-its: Fix vgic_its_restore_collection_table returned value
KVM: arm/arm64: vgic-its: Fix return value for device table restore
arm/arm64: kvm: Disable branch profiling in HYP code
arm/arm64: kvm: Move initialization completion message
arm/arm64: KVM: set right LR register value for 32 bit guest when inject abort
KVM: arm64: its: Fix missing dynamic allocation check in scan_its_table
|
|
In kvm_apic_set_state() we update the hardware virtualized APIC after
the full APIC state has been overwritten. Do the same, when the full
APIC state has been reset in kvm_lapic_reset().
This updates some hardware state that was previously forgotten, as
far as I can tell. Also, this allows removing some APIC-related reset
code from vmx_vcpu_reset().
Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Parts of the posted interrupt descriptor configure host behavior,
such as the notification vector and destination. Overwriting them
with zero as done during vCPU reset breaks posted interrupts.
KVM (re-)writes these fields on certain occasions and belatedly fixes
the situation in many cases. However, if you have a guest configured
with "idle=poll", for example, the fields might stay zero forever.
Do not reset the full descriptor in vmx_vcpu_reset(). Instead,
reset only the outstanding notifications and leave everything
else untouched.
Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
to READ_ONCE()/WRITE_ONCE()
Please do not apply this to mainline directly, instead please re-run the
coccinelle script shown below and apply its output.
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't harmful, and changing them results in
churn.
However, for some features, the read/write distinction is critical to
correct operation. To distinguish these cases, separate read/write
accessors must be used. This patch migrates (most) remaining
ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following
coccinelle script:
----
// Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and
// WRITE_ONCE()
// $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch
virtual patch
@ depends on patch @
expression E1, E2;
@@
- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)
@ depends on patch @
expression E;
@@
- ACCESS_ONCE(E)
+ READ_ONCE(E)
----
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Both Intel SDM and AMD APM mentioned that MCi_STATUS, when the register is
implemented, this register can be cleared by explicitly writing 0s to this
register. Writing 1s to this register will cause a general-protection
exception.
The mce is emulated in qemu, so just the guest attempts to write 1 to this
register should cause a #GP, this patch does it.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
In my setup, EPT is not exposed to L1, the VPID capability is exposed and
can be observed by vmxcap tool in L1:
INVVPID supported yes
Individual-address INVVPID yes
Single-context INVVPID yes
All-context INVVPID yes
Single-context-retaining-globals INVVPID yes
However, the module parameter of VPID observed in L1 is always N, the
cpu_has_vmx_invvpid() check in L1 KVM fails since vmx_capability.vpid
is 0 and it is not read from MSR due to EPT is not exposed.
The VPID can be used to tag linear mappings when EPT is not enabled. However,
current logic just detects VPID capability if EPT is enabled, this patch
fixes it.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
I can use vmxcap tool to observe "EPTP Switching yes" even if EPT is not
exposed to L1.
EPT switching is advertised unconditionally since it is emulated, however,
it can be treated as an extended feature for EPT and it should not be
advertised if EPT itself is not exposed. This patch fixes it.
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
Commit 05cade71cf3b ("KVM: nSVM: fix SMI injection in guest mode") made
KVM mask SMI if GIF=0 but it didn't do anything to unmask it when GIF is
enabled.
The issue manifests for me as a significantly longer boot time of Windows
guests when running with SMM-enabled OVMF.
This commit fixes it by intercepting STGI instead of requesting immediate
exit if the reason why SMM was masked is GIF.
Fixes: 05cade71cf3b ("KVM: nSVM: fix SMI injection in guest mode")
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
The x86 MMU if full of code that returns 0 and 1 for retry/emulate. Use
the existing RET_MMIO_PF_RETRY/RET_MMIO_PF_EMULATE enum, renaming it to
drop the MMIO part.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Entering SMM while running in guest mode wasn't working very well because several
pieces of the vcpu state were left set up for nested operation.
Some of the issues observed:
* L1 was getting unexpected VM exits (using L1 interception controls but running
in SMM execution environment)
* MMU was confused (walk_mmu was still set to nested_mmu)
* INTERCEPT_SMI was not emulated for L1 (KVM never injected SVM_EXIT_SMI)
Intel SDM actually prescribes the logical processor to "leave VMX operation" upon
entering SMM in 34.14.1 Default Treatment of SMI Delivery. AMD doesn't seem to
document this but they provide fields in the SMM state-save area to stash the
current state of SVM. What we need to do is basically get out of guest mode for
the duration of SMM. All this completely transparent to L1, i.e. L1 is not given
control and no L1 observable state changes.
To avoid code duplication this commit takes advantage of the existing nested
vmexit and run functionality, perhaps at the cost of efficiency. To get out of
guest mode, nested_svm_vmexit is called, unchanged. Re-entering is performed using
enter_svm_guest_mode.
This commit fixes running Windows Server 2016 with Hyper-V enabled in a VM with
OVMF firmware (OVMF_CODE-need-smm.fd).
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Analogous to 858e25c06fb0 ("kvm: nVMX: Refactor nested_vmx_run()"), this commit splits
nested_svm_vmrun into two parts. The newly introduced enter_svm_guest_mode modifies the
vcpu state to transition from L1 to L2, while the code left in nested_svm_vmrun handles
the VMRUN instruction.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Entering SMM while running in guest mode wasn't working very well because several
pieces of the vcpu state were left set up for nested operation.
Some of the issues observed:
* L1 was getting unexpected VM exits (using L1 interception controls but running
in SMM execution environment)
* SMM handler couldn't write to vmx_set_cr4 because of incorrect validity checks
predicated on nested.vmxon
* MMU was confused (walk_mmu was still set to nested_mmu)
Intel SDM actually prescribes the logical processor to "leave VMX operation" upon
entering SMM in 34.14.1 Default Treatment of SMI Delivery. What we need to do is
basically get out of guest mode and set nested.vmxon to false for the duration of
SMM. All this completely transparent to L1, i.e. L1 is not given control and no
L1 observable state changes.
To avoid code duplication this commit takes advantage of the existing nested
vmexit and run functionality, perhaps at the cost of efficiency. To get out of
guest mode, nested_vmx_vmexit with exit_reason == -1 is called, a trick already
used in vmx_leave_nested. Re-entering is cleaner, using enter_vmx_non_root_mode.
This commit fixes running Windows Server 2016 with Hyper-V enabled in a VM with
OVMF firmware (OVMF_CODE-need-smm.fd).
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Intel SDM 27.5.2 Loading Host Segment and Descriptor-Table Registers:
"The GDTR and IDTR limits are each set to FFFFH."
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Similar to NMI, there may be ISA specific reasons why an SMI cannot be
injected into the guest. This commit adds a new smi_allowed callback to
be implemented in following commits.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Entering and exiting SMM may require ISA specific handling under certain
circumstances. This commit adds two new callbacks with empty implementations.
Actual functionality will be added in following commits.
* pre_enter_smm() is to be called when injecting an SMM, before any
SMM related vcpu state has been changed
* pre_leave_smm() is to be called when emulating the RSM instruction,
when the vcpu is in real mode and before any SMM related vcpu state
has been restored
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
It has always annoyed me a bit how SVM_EXIT_NPF is handled by
pf_interception. This is also the only reason behind the
under-documented need_unprotect argument to kvm_handle_page_fault.
Let NPF go straight to kvm_mmu_page_fault, just like VMX
does in handle_ept_violation and handle_ept_misconfig.
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Checking the mode is unnecessary, and is done without a memory barrier
separating the LAPIC write from the vcpu->mode read; in addition,
kvm_vcpu_wake_up is already doing a check for waiters on the wait queue
that has the same effect.
In practice it's safe because spin_lock has full-barrier semantics on x86,
but don't be too clever.
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Remove redundant null checks before calling kmem_cache_destroy.
Found with make coccicheck M=arch/x86/kvm on linux-next tag
next-20170929.
Signed-off-by: Tim Hansen <devtimhansen@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
SDM mentioned:
"If either the “unrestricted guest†VM-execution control or the “mode-based
execute control for EPT†VM- execution control is 1, the “enable EPTâ€
VM-execution control must also be 1."
However, we can still observe unrestricted_guest is Y after inserting the kvm-intel.ko
w/ ept=N. It depends on later starts a guest in order that the function
vmx_compute_secondary_exec_control() can be executed, then both the module parameter
and exec control fields will be amended.
This patch fixes it by amending module parameter immediately during vmcs data setup.
Reviewed-by: Jim Mattson <jmattson@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
- XCR0 is reset to 1 by RESET but not INIT
- XSS is zeroed by both RESET and INIT
- BNDCFGU, BND0-BND3, BNDCFGS, BNDSTATUS are zeroed by both RESET and INIT
This patch does this according to SDM.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Our routines look at tscdeadline and period when deciding state of a
timer. The timer is disarmed when switching between TSC deadline and
other modes, so we should set everything to disarmed state.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
preemption timer only looks at tscdeadline and could inject already
disarmed timer.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
0 should disable the timer, but start_hv_timer will recognize it as an
expired timer instead.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The kvm slabs can consume a significant amount of system memory
and indeed in our production environment we have observed that
a lot of machines are spending significant amount of memory that
can not be left as system memory overhead. Also the allocations
from these slabs can be triggered directly by user space applications
which has access to kvm and thus a buggy application can leak
such memory. So, these caches should be accounted to kmemcg.
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Let's just name these according to the SDM. This should make it clearer
that the are used to enable exiting and not the feature itself.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
Changing it afterwards doesn't make too much sense and will only result
in inconsistencies.
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
No need for another enable_ept check. kvm->arch.ept_identity_map_addr
only has to be inititalized once. Having alloc_identity_pagetable() is
overkill and dropping BUG_ONs is always nice.
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
They are inititally 0, so no need to reset them to 0.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
vcpu->cpu is not cleared when doing a vmx_vcpu_put/load, so this can be
dropped.
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
Without this, we won't be able to do any flushes, so let's just require
it. Should be absent in very strange configurations.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
ept_* function should only be called with enable_ept being set.
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
This function is only called with enable_ept.
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
