| Age | Commit message (Collapse) | Author |
|---|
|
Drop the per-GPR dirty checks when synchronizing GPRs to the GHCB, the
GRPs' dirty bits are set from time zero and never cleared, i.e. will
always be seen as dirty. The obvious alternative would be to clear
the dirty bits when appropriate, but removing the dirty checks is
desirable as it allows reverting GPR dirty+available tracking, which
adds overhead to all flavors of x86 VMs.
Note, unconditionally writing the GPRs in the GHCB is tacitly allowed
by the GHCB spec, which allows the hypervisor (or guest) to provide
unnecessary info; it's the guest's responsibility to consume only what
it needs (the hypervisor is untrusted after all).
The guest and hypervisor can supply additional state if desired but
must not rely on that additional state being provided.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Fixes: 291bd20d5d88 ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210122235049.3107620-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Even when we are outside the nested guest, some vmcs02 fields
may not be in sync vs vmcs12. This is intentional, even across
nested VM-exit, because the sync can be delayed until the nested
hypervisor performs a VMCLEAR or a VMREAD/VMWRITE that affects those
rarely accessed fields.
However, during KVM_GET_NESTED_STATE, the vmcs12 has to be up to date to
be able to restore it. To fix that, call copy_vmcs02_to_vmcs12_rare()
before the vmcs12 contents are copied to userspace.
Fixes: 7952d769c29ca ("KVM: nVMX: Sync rarely accessed guest fields only when needed")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210114205449.8715-2-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
On VMX, if we exit and then re-enter immediately without leaving
the vmx_vcpu_run() function, the kvm_entry event is not logged.
That means we will see one (or more) kvm_exit, without its (their)
corresponding kvm_entry, as shown here:
CPU-1979 [002] 89.871187: kvm_entry: vcpu 1
CPU-1979 [002] 89.871218: kvm_exit: reason MSR_WRITE
CPU-1979 [002] 89.871259: kvm_exit: reason MSR_WRITE
It also seems possible for a kvm_entry event to be logged, but then
we leave vmx_vcpu_run() right away (if vmx->emulation_required is
true). In this case, we will have a spurious kvm_entry event in the
trace.
Fix these situations by moving trace_kvm_entry() inside vmx_vcpu_run()
(where trace_kvm_exit() already is).
A trace obtained with this patch applied looks like this:
CPU-14295 [000] 8388.395387: kvm_entry: vcpu 0
CPU-14295 [000] 8388.395392: kvm_exit: reason MSR_WRITE
CPU-14295 [000] 8388.395393: kvm_entry: vcpu 0
CPU-14295 [000] 8388.395503: kvm_exit: reason EXTERNAL_INTERRUPT
Of course, not calling trace_kvm_entry() in common x86 code any
longer means that we need to adjust the SVM side of things too.
Signed-off-by: Lorenzo Brescia <lorenzo.brescia@edu.unito.it>
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Message-Id: <160873470698.11652.13483635328769030605.stgit@Wayrath>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The injection process of smi has two steps:
Qemu KVM
Step1:
cpu->interrupt_request &= \
~CPU_INTERRUPT_SMI;
kvm_vcpu_ioctl(cpu, KVM_SMI)
call kvm_vcpu_ioctl_smi() and
kvm_make_request(KVM_REQ_SMI, vcpu);
Step2:
kvm_vcpu_ioctl(cpu, KVM_RUN, 0)
call process_smi() if
kvm_check_request(KVM_REQ_SMI, vcpu) is
true, mark vcpu->arch.smi_pending = true;
The vcpu->arch.smi_pending will be set true in step2, unfortunately if
vcpu paused between step1 and step2, the kvm_run->immediate_exit will be
set and vcpu has to exit to Qemu immediately during step2 before mark
vcpu->arch.smi_pending true.
During VM migration, Qemu will get the smi pending status from KVM using
KVM_GET_VCPU_EVENTS ioctl at the downtime, then the smi pending status
will be lost.
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Signed-off-by: Shengen Zhuang <zhuangshengen@huawei.com>
Message-Id: <20210118084720.1585-1-jianjay.zhou@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The HW_REF_CPU_CYCLES event on the fixed counter 2 is pseudo-encoded as
0x0300 in the intel_perfmon_event_map[]. Correct its usage.
Fixes: 62079d8a4312 ("KVM: PMU: add proper support for fixed counter 2")
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20201230081916.63417-1-like.xu@linux.intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Since we know vPMU will not work properly when (1) the guest bit_width(s)
of the [gp|fixed] counters are greater than the host ones, or (2) guest
requested architectural events exceeds the range supported by the host, so
we can setup a smaller left shift value and refresh the guest cpuid entry,
thus fixing the following UBSAN shift-out-of-bounds warning:
shift exponent 197 is too large for 64-bit type 'long long unsigned int'
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x107/0x163 lib/dump_stack.c:120
ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
__ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:395
intel_pmu_refresh.cold+0x75/0x99 arch/x86/kvm/vmx/pmu_intel.c:348
kvm_vcpu_after_set_cpuid+0x65a/0xf80 arch/x86/kvm/cpuid.c:177
kvm_vcpu_ioctl_set_cpuid2+0x160/0x440 arch/x86/kvm/cpuid.c:308
kvm_arch_vcpu_ioctl+0x11b6/0x2d70 arch/x86/kvm/x86.c:4709
kvm_vcpu_ioctl+0x7b9/0xdb0 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3386
vfs_ioctl fs/ioctl.c:48 [inline]
__do_sys_ioctl fs/ioctl.c:753 [inline]
__se_sys_ioctl fs/ioctl.c:739 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reported-by: syzbot+ae488dc136a4cc6ba32b@syzkaller.appspotmail.com
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20210118025800.34620-1-like.xu@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add compile-time asserts in rsvd_bits() to guard against KVM passing in
garbage hardcoded values, and cap the upper bound at '63' for dynamic
values to prevent generating a mask that would overflow a u64.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210113204515.3473079-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The ACPI-enabled Intel MID platforms neither have WDAT table nor proper IDs
to instantiate watchdog device. In order to keep them working move the board
code from arch/x86 to drivers/platform/x86.
Note, the complete SFI support is going to be removed, that's why PDx86
has been chosen as a new home for it. This is the only device which needs
additional code so far.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Merge misc fixes from Andrew Morton:
"18 patches.
Subsystems affected by this patch series: mm (pagealloc, memcg, kasan,
memory-failure, and highmem), ubsan, proc, and MAINTAINERS"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
MAINTAINERS: add a couple more files to the Clang/LLVM section
proc_sysctl: fix oops caused by incorrect command parameters
powerpc/mm/highmem: use __set_pte_at() for kmap_local()
mips/mm/highmem: use set_pte() for kmap_local()
mm/highmem: prepare for overriding set_pte_at()
sparc/mm/highmem: flush cache and TLB
mm: fix page reference leak in soft_offline_page()
ubsan: disable unsigned-overflow check for i386
kasan, mm: fix resetting page_alloc tags for HW_TAGS
kasan, mm: fix conflicts with init_on_alloc/free
kasan: fix HW_TAGS boot parameters
kasan: fix incorrect arguments passing in kasan_add_zero_shadow
kasan: fix unaligned address is unhandled in kasan_remove_zero_shadow
mm: fix numa stats for thp migration
mm: memcg: fix memcg file_dirty numa stat
mm: memcg/slab: optimize objcg stock draining
mm: fix initialization of struct page for holes in memory layout
x86/setup: don't remove E820_TYPE_RAM for pfn 0
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Correct the marking of kthreads which are supposed to run on a
specific, single CPU vs such which are affine to only one CPU, mark
per-cpu workqueue threads as such and make sure that marking
"survives" CPU hotplug. Fix CPU hotplug issues with such kthreads.
- A fix to not push away tasks on CPUs coming online.
- Have workqueue CPU hotplug code use cpu_possible_mask when breaking
affinity on CPU offlining so that pending workers can finish on newly
arrived onlined CPUs too.
- Dump tasks which haven't vacated a CPU which is currently being
unplugged.
- Register a special scale invariance callback which gets called on
resume from RAM to read out APERF/MPERF after resume and thus make
the schedutil scaling governor more precise.
* tag 'sched_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Relax the set_cpus_allowed_ptr() semantics
sched: Fix CPU hotplug / tighten is_per_cpu_kthread()
sched: Prepare to use balance_push in ttwu()
workqueue: Restrict affinity change to rescuer
workqueue: Tag bound workers with KTHREAD_IS_PER_CPU
kthread: Extract KTHREAD_IS_PER_CPU
sched: Don't run cpu-online with balance_push() enabled
workqueue: Use cpu_possible_mask instead of cpu_active_mask to break affinity
sched/core: Print out straggler tasks in sched_cpu_dying()
x86: PM: Register syscore_ops for scale invariance
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add a new Intel model number for Alder Lake
- Differentiate which aspects of the FPU state get saved/restored when
the FPU is used in-kernel and fix a boot crash on K7 due to early
MXCSR access before CR4.OSFXSR is even set.
- A couple of noinstr annotation fixes
- Correct die ID setting on AMD for users of topology information which
need the correct die ID
- A SEV-ES fix to handle string port IO to/from kernel memory properly
* tag 'x86_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add another Alder Lake CPU to the Intel family
x86/mmx: Use KFPU_387 for MMX string operations
x86/fpu: Add kernel_fpu_begin_mask() to selectively initialize state
x86/topology: Make __max_die_per_package available unconditionally
x86: __always_inline __{rd,wr}msr()
x86/mce: Remove explicit/superfluous tracing
locking/lockdep: Avoid noinstr warning for DEBUG_LOCKDEP
locking/lockdep: Cure noinstr fail
x86/sev: Fix nonistr violation
x86/entry: Fix noinstr fail
x86/cpu/amd: Set __max_die_per_package on AMD
x86/sev-es: Handle string port IO to kernel memory properly
|
|
Patch series "mm: fix initialization of struct page for holes in memory layout", v3.
Commit 73a6e474cb37 ("mm: memmap_init: iterate over memblock regions
rather that check each PFN") exposed several issues with the memory map
initialization and these patches fix those issues.
Initially there were crashes during compaction that Qian Cai reported
back in April [1]. It seemed back then that the problem was fixed, but
a few weeks ago Andrea Arcangeli hit the same bug [2] and there was an
additional discussion at [3].
[1] https://lore.kernel.org/lkml/8C537EB7-85EE-4DCF-943E-3CC0ED0DF56D@lca.pw
[2] https://lore.kernel.org/lkml/20201121194506.13464-1-aarcange@redhat.com
[3] https://lore.kernel.org/mm-commits/20201206005401.qKuAVgOXr%akpm@linux-foundation.org
This patch (of 2):
The first 4Kb of memory is a BIOS owned area and to avoid its allocation
for the kernel it was not listed in e820 tables as memory. As the result,
pfn 0 was never recognised by the generic memory management and it is not
a part of neither node 0 nor ZONE_DMA.
If set_pfnblock_flags_mask() would be ever called for the pageblock
corresponding to the first 2Mbytes of memory, having pfn 0 outside of
ZONE_DMA would trigger
VM_BUG_ON_PAGE(!zone_spans_pfn(page_zone(page), pfn), page);
Along with reserving the first 4Kb in e820 tables, several first pages are
reserved with memblock in several places during setup_arch(). These
reservations are enough to ensure the kernel does not touch the BIOS area
and it is not necessary to remove E820_TYPE_RAM for pfn 0.
Remove the update of e820 table that changes the type of pfn 0 and move
the comment describing why it was done to trim_low_memory_range() that
reserves the beginning of the memory.
Link: https://lkml.kernel.org/r/20210111194017.22696-2-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This implements the missing mount_setattr() syscall. While the new mount
api allows to change the properties of a superblock there is currently
no way to change the properties of a mount or a mount tree using file
descriptors which the new mount api is based on. In addition the old
mount api has the restriction that mount options cannot be applied
recursively. This hasn't changed since changing mount options on a
per-mount basis was implemented in [1] and has been a frequent request
not just for convenience but also for security reasons. The legacy
mount syscall is unable to accommodate this behavior without introducing
a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND |
MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost
mount. Changing MS_REC to apply to the whole mount tree would mean
introducing a significant uapi change and would likely cause significant
regressions.
The new mount_setattr() syscall allows to recursively clear and set
mount options in one shot. Multiple calls to change mount options
requesting the same changes are idempotent:
int mount_setattr(int dfd, const char *path, unsigned flags,
struct mount_attr *uattr, size_t usize);
Flags to modify path resolution behavior are specified in the @flags
argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW,
and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to
restrict path resolution as introduced with openat2() might be supported
in the future.
The mount_setattr() syscall can be expected to grow over time and is
designed with extensibility in mind. It follows the extensible syscall
pattern we have used with other syscalls such as openat2(), clone3(),
sched_{set,get}attr(), and others.
The set of mount options is passed in the uapi struct mount_attr which
currently has the following layout:
struct mount_attr {
__u64 attr_set;
__u64 attr_clr;
__u64 propagation;
__u64 userns_fd;
};
The @attr_set and @attr_clr members are used to clear and set mount
options. This way a user can e.g. request that a set of flags is to be
raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in
@attr_set while at the same time requesting that another set of flags is
to be lowered such as removing noexec from a mount tree by specifying
MOUNT_ATTR_NOEXEC in @attr_clr.
Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0,
not a bitmap, users wanting to transition to a different atime setting
cannot simply specify the atime setting in @attr_set, but must also
specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that
MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set
can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in
@attr_clr.
The @propagation field lets callers specify the propagation type of a
mount tree. Propagation is a single property that has four different
settings and as such is not really a flag argument but an enum.
Specifically, it would be unclear what setting and clearing propagation
settings in combination would amount to. The legacy mount() syscall thus
forbids the combination of multiple propagation settings too. The goal
is to keep the semantics of mount propagation somewhat simple as they
are overly complex as it is.
The @userns_fd field lets user specify a user namespace whose idmapping
becomes the idmapping of the mount. This is implemented and explained in
detail in the next patch.
[1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount")
Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com
Cc: David Howells <dhowells@redhat.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
Taking ownership of the FPU in kernel mode disables preemption, and
this may result in excessive scheduling blackouts if the size of the
data being processed on the FPU is unbounded.
Given that taking and releasing the FPU is cheap these days on x86, we
can limit the impact of this issue easily for skcipher implementations,
by moving the FPU begin/end calls inside the skcipher walk processing
loop. Considering that skcipher walks operate on at most one page at a
time, doing so fully mitigates this issue.
This also permits the skcipher walk logic to use non-atomic kmalloc()
calls etc so we can change the 'atomic' bool argument in the calls to
skcipher_walk_virt() to false as well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Indirect calls are very expensive on x86, so use a static call to set
the system-wide AES-NI/CTR asm helper.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add Alder Lake mobile CPU model number to Intel family.
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210121215004.11618-1-tony.luck@intel.com
|
|
The implementation was rather buggy. It unconditionally marked PTEs
read-only, even for VM_SHARED mappings. I'm not sure whether this is
actually a problem, but it certainly seems unwise. More importantly, it
released the mmap lock before flushing the TLB, which could allow a racing
CoW operation to falsely believe that the underlying memory was not
writable.
I can't find any users at all of this mechanism, so just remove it.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Stas Sergeev <stsp2@yandex.ru>
Link: https://lkml.kernel.org/r/f3086de0babcab36f69949b5780bde851f719bc8.1611078018.git.luto@kernel.org
|
|
device_initcall() expects a function of type initcall_t, which returns
an integer. Change the signature of sgx_init() to match.
Fixes: e7e0545299d8c ("x86/sgx: Initialize metadata for Enclave Page Cache (EPC) sections")
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/20210113232311.277302-1-samitolvanen@google.com
|
|
The default kernel_fpu_begin() doesn't work on systems that support XMM but
haven't yet enabled CR4.OSFXSR. This causes crashes when _mmx_memcpy() is
called too early because LDMXCSR generates #UD when the aforementioned bit
is clear.
Fix it by using kernel_fpu_begin_mask(KFPU_387) explicitly.
Fixes: 7ad816762f9b ("x86/fpu: Reset MXCSR to default in kernel_fpu_begin()")
Reported-by: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Krzysztof Piotr Olędzki <ole@ans.pl>
Tested-by: Krzysztof Mazur <krzysiek@podlesie.net>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/e7bf21855fe99e5f3baa27446e32623358f69e8d.1611205691.git.luto@kernel.org
|
|
Currently, requesting kernel FPU access doesn't distinguish which parts of
the extended ("FPU") state are needed. This is nice for simplicity, but
there are a few cases in which it's suboptimal:
- The vast majority of in-kernel FPU users want XMM/YMM/ZMM state but do
not use legacy 387 state. These users want MXCSR initialized but don't
care about the FPU control word. Skipping FNINIT would save time.
(Empirically, FNINIT is several times slower than LDMXCSR.)
- Code that wants MMX doesn't want or need MXCSR initialized.
_mmx_memcpy(), for example, can run before CR4.OSFXSR gets set, and
initializing MXCSR will fail because LDMXCSR generates an #UD when the
aforementioned CR4 bit is not set.
- Any future in-kernel users of XFD (eXtended Feature Disable)-capable
dynamic states will need special handling.
Add a more specific API that allows callers to specify exactly what they
want.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Krzysztof Piotr Olędzki <ole@ans.pl>
Link: https://lkml.kernel.org/r/aff1cac8b8fc7ee900cf73e8f2369966621b053f.1611205691.git.luto@kernel.org
|
|
The x64 bpf jit expects bpf images converge within the given passes, but
it could fail to do so with some corner cases. For example:
l0: ja 40
l1: ja 40
[... repeated ja 40 ]
l39: ja 40
l40: ret #0
This bpf program contains 40 "ja 40" instructions which are effectively
NOPs and designed to be replaced with valid code dynamically. Ideally,
bpf jit should optimize those "ja 40" instructions out when translating
the bpf instructions into x64 machine code. However, do_jit() can only
remove one "ja 40" for offset==0 on each pass, so it requires at least
40 runs to eliminate those JMPs and exceeds the current limit of
passes(20). In the end, the program got rejected when BPF_JIT_ALWAYS_ON
is set even though it's legit as a classic socket filter.
To make bpf images more likely converge within 20 passes, this commit
pads some instructions with NOPs in the last 5 passes:
1. conditional jumps
A possible size variance comes from the adoption of imm8 JMP. If the
offset is imm8, we calculate the size difference of this BPF instruction
between the previous and the current pass and fill the gap with NOPs.
To avoid the recalculation of jump offset, those NOPs are inserted before
the JMP code, so we have to subtract the 2 bytes of imm8 JMP when
calculating the NOP number.
2. BPF_JA
There are two conditions for BPF_JA.
a.) nop jumps
If this instruction is not optimized out in the previous pass,
instead of removing it, we insert the equivalent size of NOPs.
b.) label jumps
Similar to condition jumps, we prepend NOPs right before the JMP
code.
To make the code concise, emit_nops() is modified to use the signed len and
return the number of inserted NOPs.
For bpf-to-bpf, we always enable padding for the extra pass since there
is only one extra run and the jump padding doesn't affected the images
that converge without padding.
After applying this patch, the corner case was loaded with the following
jit code:
flen=45 proglen=77 pass=17 image=ffffffffc03367d4 from=jump pid=10097
JIT code: 00000000: 0f 1f 44 00 00 55 48 89 e5 53 41 55 31 c0 45 31
JIT code: 00000010: ed 48 89 fb eb 30 eb 2e eb 2c eb 2a eb 28 eb 26
JIT code: 00000020: eb 24 eb 22 eb 20 eb 1e eb 1c eb 1a eb 18 eb 16
JIT code: 00000030: eb 14 eb 12 eb 10 eb 0e eb 0c eb 0a eb 08 eb 06
JIT code: 00000040: eb 04 eb 02 66 90 31 c0 41 5d 5b c9 c3
0: 0f 1f 44 00 00 nop DWORD PTR [rax+rax*1+0x0]
5: 55 push rbp
6: 48 89 e5 mov rbp,rsp
9: 53 push rbx
a: 41 55 push r13
c: 31 c0 xor eax,eax
e: 45 31 ed xor r13d,r13d
11: 48 89 fb mov rbx,rdi
14: eb 30 jmp 0x46
16: eb 2e jmp 0x46
...
3e: eb 06 jmp 0x46
40: eb 04 jmp 0x46
42: eb 02 jmp 0x46
44: 66 90 xchg ax,ax
46: 31 c0 xor eax,eax
48: 41 5d pop r13
4a: 5b pop rbx
4b: c9 leave
4c: c3 ret
At the 16th pass, 15 jumps were already optimized out, and one jump was
replaced with NOPs at 44 and the image converged at the 17th pass.
v4:
- Add the detailed comments about the possible padding bytes
v3:
- Copy the instructions of prologue separately or the size calculation
of the first BPF instruction would include the prologue.
- Replace WARN_ONCE() with pr_err() and EFAULT
- Use MAX_PASSES in the for loop condition check
- Remove the "padded" flag from x64_jit_data. For the extra pass of
subprogs, padding is always enabled since it won't hurt the images
that converge without padding.
v2:
- Simplify the sample code in the description and provide the jit code
- Check the expected padding bytes with WARN_ONCE
- Move the 'padded' flag to 'struct x64_jit_data'
Signed-off-by: Gary Lin <glin@suse.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210119102501.511-2-glin@suse.com
|
|
Conflicts:
drivers/net/can/dev.c
commit 03f16c5075b2 ("can: dev: can_restart: fix use after free bug")
commit 3e77f70e7345 ("can: dev: move driver related infrastructure into separate subdir")
Code move.
drivers/net/dsa/b53/b53_common.c
commit 8e4052c32d6b ("net: dsa: b53: fix an off by one in checking "vlan->vid"")
commit b7a9e0da2d1c ("net: switchdev: remove vid_begin -> vid_end range from VLAN objects")
Field rename.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A fix for build failure showing up in some configurations"
* tag 'for-linus-5.11-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: fix 'nopvspin' build error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fix from Wei Liu:
"One patch from Dexuan to fix clockevent initialization"
* tag 'hyperv-fixes-signed-20210119' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Initialize clockevents after LAPIC is initialized
|
|
EFI on x86_64 keeps track of the process's MM pointer by storing it
in a global struct called 'efi_scratch', which also used to contain
the mixed mode stack pointer. Let's clean this up a little bit, by
getting rid of the struct, and pushing the mm handling into the
callees entirely.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
As a first step to removing the awkward 'struct efi_scratch' definition
that conveniently combines the storage of the mixed mode stack pointer
with the MM pointer variable that records the task's MM pointer while it
is being replaced with the EFI MM one, move the mixed mode stack pointer
into a separate variable.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
On x86 scale invariace tends to be disabled during resume from
suspend-to-RAM, because the MPERF or APERF MSR values are not as
expected then due to updates taking place after the platform
firmware has been invoked to complete the suspend transition.
That, of course, is not desirable, especially if the schedutil
scaling governor is in use, because the lack of scale invariance
causes it to be less reliable.
To counter that effect, modify init_freq_invariance() to register
a syscore_ops object for scale invariance with the ->resume callback
pointing to init_counter_refs() which will run on the CPU starting
the resume transition (the other CPUs will be taken care of the
"online" operations taking place later).
Fixes: e2b0d619b400 ("x86, sched: check for counters overflow in frequency invariant accounting")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Link: https://lkml.kernel.org/r/1803209.Mvru99baaF@kreacher
|
|
That logic is unused since
320100a5ffe5 ("x86/entry: Remove the TRACE_IRQS cruft")
Remove it.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/YAAszZJ2GcIYZmB5@hirez.programming.kicks-ass.net
|
|
Fix build error in x86/xen/ when PARAVIRT_SPINLOCKS is not enabled.
Fixes this build error:
../arch/x86/xen/smp_hvm.c: In function ‘xen_hvm_smp_init’:
../arch/x86/xen/smp_hvm.c:77:3: error: ‘nopvspin’ undeclared (first use in this function)
nopvspin = true;
Fixes: 3d7746bea925 ("x86/xen: Fix xen_hvm_smp_init() when vector callback not available")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20210115191123.27572-1-rdunlap@infradead.org
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
With commit 4df4cb9e99f8, the Hyper-V direct-mode STIMER is actually
initialized before LAPIC is initialized: see
apic_intr_mode_init()
x86_platform.apic_post_init()
hyperv_init()
hv_stimer_alloc()
apic_bsp_setup()
setup_local_APIC()
setup_local_APIC() temporarily disables LAPIC, initializes it and
re-eanble it. The direct-mode STIMER depends on LAPIC, and when it's
registered, it can be programmed immediately and the timer can fire
very soon:
hv_stimer_init
clockevents_config_and_register
clockevents_register_device
tick_check_new_device
tick_setup_device
tick_setup_periodic(), tick_setup_oneshot()
clockevents_program_event
When the timer fires in the hypervisor, if the LAPIC is in the
disabled state, new versions of Hyper-V ignore the event and don't inject
the timer interrupt into the VM, and hence the VM hangs when it boots.
Note: when the VM starts/reboots, the LAPIC is pre-enabled by the
firmware, so the window of LAPIC being temporarily disabled is pretty
small, and the issue can only happen once out of 100~200 reboots for
a 40-vCPU VM on one dev host, and on another host the issue doesn't
reproduce after 2000 reboots.
The issue is more noticeable for kdump/kexec, because the LAPIC is
disabled by the first kernel, and stays disabled until the kdump/kexec
kernel enables it. This is especially an issue to a Generation-2 VM
(for which Hyper-V doesn't emulate the PIT timer) when CONFIG_HZ=1000
(rather than CONFIG_HZ=250) is used.
Fix the issue by moving hv_stimer_alloc() to a later place where the
LAPIC timer is initialized.
Fixes: 4df4cb9e99f8 ("x86/hyperv: Initialize clockevents earlier in CPU onlining")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210116223136.13892-1-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2021-01-16
1) Extend atomic operations to the BPF instruction set along with x86-64 JIT support,
that is, atomic{,64}_{xchg,cmpxchg,fetch_{add,and,or,xor}}, from Brendan Jackman.
2) Add support for using kernel module global variables (__ksym externs in BPF
programs) retrieved via module's BTF, from Andrii Nakryiko.
3) Generalize BPF stackmap's buildid retrieval and add support to have buildid
stored in mmap2 event for perf, from Jiri Olsa.
4) Various fixes for cross-building BPF sefltests out-of-tree which then will
unblock wider automated testing on ARM hardware, from Jean-Philippe Brucker.
5) Allow to retrieve SOL_SOCKET opts from sock_addr progs, from Daniel Borkmann.
6) Clean up driver's XDP buffer init and split into two helpers to init per-
descriptor and non-changing fields during processing, from Lorenzo Bianconi.
7) Minor misc improvements to libbpf & bpftool, from Ian Rogers.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (41 commits)
perf: Add build id data in mmap2 event
bpf: Add size arg to build_id_parse function
bpf: Move stack_map_get_build_id into lib
bpf: Document new atomic instructions
bpf: Add tests for new BPF atomic operations
bpf: Add bitwise atomic instructions
bpf: Pull out a macro for interpreting atomic ALU operations
bpf: Add instructions for atomic_[cmp]xchg
bpf: Add BPF_FETCH field / create atomic_fetch_add instruction
bpf: Move BPF_STX reserved field check into BPF_STX verifier code
bpf: Rename BPF_XADD and prepare to encode other atomics in .imm
bpf: x86: Factor out a lookup table for some ALU opcodes
bpf: x86: Factor out emission of REX byte
bpf: x86: Factor out emission of ModR/M for *(reg + off)
tools/bpftool: Add -Wall when building BPF programs
bpf, libbpf: Avoid unused function warning on bpf_tail_call_static
selftests/bpf: Install btf_dump test cases
selftests/bpf: Fix installation of urandom_read
selftests/bpf: Move generated test files to $(TEST_GEN_FILES)
selftests/bpf: Fix out-of-tree build
...
====================
Link: https://lore.kernel.org/r/20210116012922.17823-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- A series to fix a regression when running as a fully virtualized
guest on an old Xen hypervisor not supporting PV interrupt callbacks
for HVM guests.
- A patch to add support to query Xen resource sizes (setting was
possible already) from user mode.
* tag 'for-linus-5.11-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: Fix xen_hvm_smp_init() when vector callback not available
x86/xen: Don't register Xen IPIs when they aren't going to be used
x86/xen: Add xen_no_vector_callback option to test PCI INTX delivery
xen: Set platform PCI device INTX affinity to CPU0
xen: Fix event channel callback via INTX/GSI
xen/privcmd: allow fetching resource sizes
|
|
Look up the LED from a GPIO machine descriptor table. The Geode LEDs
should be on the CS5535 companion chip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lkml.kernel.org/r/20201124085339.6181-3-linus.walleij@linaro.org
|
|
Look up the LED from a GPIO machine descriptor table. The Geode LEDs
should be on the CS5535 companion chip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lkml.kernel.org/r/20201124085339.6181-2-linus.walleij@linaro.org
|
|
Look up the LED from a GPIO machine descriptor table. The Geode LEDs
should be on the CS5535 companion chip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lkml.kernel.org/r/20201124085339.6181-1-linus.walleij@linaro.org
|
|
Defining DEBUG should only be done in development. So remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lkml.kernel.org/r/20210114212827.47584-1-trix@redhat.com
|
|
This adds instructions for
atomic[64]_[fetch_]and
atomic[64]_[fetch_]or
atomic[64]_[fetch_]xor
All these operations are isomorphic enough to implement with the same
verifier, interpreter, and x86 JIT code, hence being a single commit.
The main interesting thing here is that x86 doesn't directly support
the fetch_ version these operations, so we need to generate a CMPXCHG
loop in the JIT. This requires the use of two temporary registers,
IIUC it's safe to use BPF_REG_AX and x86's AUX_REG for this purpose.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-10-jackmanb@google.com
|
|
This adds two atomic opcodes, both of which include the BPF_FETCH
flag. XCHG without the BPF_FETCH flag would naturally encode
atomic_set. This is not supported because it would be of limited
value to userspace (it doesn't imply any barriers). CMPXCHG without
BPF_FETCH woulud be an atomic compare-and-write. We don't have such
an operation in the kernel so it isn't provided to BPF either.
There are two significant design decisions made for the CMPXCHG
instruction:
- To solve the issue that this operation fundamentally has 3
operands, but we only have two register fields. Therefore the
operand we compare against (the kernel's API calls it 'old') is
hard-coded to be R0. x86 has similar design (and A64 doesn't
have this problem).
A potential alternative might be to encode the other operand's
register number in the immediate field.
- The kernel's atomic_cmpxchg returns the old value, while the C11
userspace APIs return a boolean indicating the comparison
result. Which should BPF do? A64 returns the old value. x86 returns
the old value in the hard-coded register (and also sets a
flag). That means return-old-value is easier to JIT, so that's
what we use.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-8-jackmanb@google.com
|
|
The BPF_FETCH field can be set in bpf_insn.imm, for BPF_ATOMIC
instructions, in order to have the previous value of the
atomically-modified memory location loaded into the src register
after an atomic op is carried out.
Suggested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-7-jackmanb@google.com
|
|
A subsequent patch will add additional atomic operations. These new
operations will use the same opcode field as the existing XADD, with
the immediate discriminating different operations.
In preparation, rename the instruction mode BPF_ATOMIC and start
calling the zero immediate BPF_ADD.
This is possible (doesn't break existing valid BPF progs) because the
immediate field is currently reserved MBZ and BPF_ADD is zero.
All uses are removed from the tree but the BPF_XADD definition is
kept around to avoid breaking builds for people including kernel
headers.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Björn Töpel <bjorn.topel@gmail.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-5-jackmanb@google.com
|
|
A later commit will need to lookup a subset of these opcodes. To
avoid duplicating code, pull out a table.
The shift opcodes won't be needed by that later commit, but they're
already duplicated, so fold them into the table anyway.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-4-jackmanb@google.com
|
|
The JIT case for encoding atomic ops is about to get more
complicated. In order to make the review & resulting code easier,
let's factor out some shared helpers.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-3-jackmanb@google.com
|
|
The case for JITing atomics is about to get more complicated. Let's
factor out some common code to make the review and result more
readable.
NB the atomics code doesn't yet use the new helper - a subsequent
patch will add its use as a side-effect of other changes.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-2-jackmanb@google.com
|
|
Arnd found a randconfig that produces the warning:
arch/x86/entry/thunk_64.o: warning: objtool: missing symbol for insn at
offset 0x3e
when building with LLVM_IAS=1 (Clang's integrated assembler). Josh
notes:
With the LLVM assembler not generating section symbols, objtool has no
way to reference this code when it generates ORC unwinder entries,
because this code is outside of any ELF function.
The limitation now being imposed by objtool is that all code must be
contained in an ELF symbol. And .L symbols don't create such symbols.
So basically, you can use an .L symbol *inside* a function or a code
segment, you just can't use the .L symbol to contain the code using a
SYM_*_START/END annotation pair.
Fangrui notes that this optimization is helpful for reducing image size
when compiling with -ffunction-sections and -fdata-sections. I have
observed on the order of tens of thousands of symbols for the kernel
images built with those flags.
A patch has been authored against GNU binutils to match this behavior
of not generating unused section symbols ([1]), so this will
also become a problem for users of GNU binutils once they upgrade to 2.36.
Omit the .L prefix on a label so that the assembler will emit an entry
into the symbol table for the label, with STB_LOCAL binding. This
enables objtool to generate proper unwind info here with LLVM_IAS=1 or
GNU binutils 2.36+.
[ bp: Massage commit message. ]
Reported-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Suggested-by: Borislav Petkov <bp@alien8.de>
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20210112194625.4181814-1-ndesaulniers@google.com
Link: https://github.com/ClangBuiltLinux/linux/issues/1209
Link: https://reviews.llvm.org/D93783
Link: https://sourceware.org/binutils/docs/as/Symbol-Names.html
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d1bcae833b32f1408485ce69f844dcd7ded093a8 [1]
|
|
Move it outside of CONFIG_SMP in order to avoid ifdeffery at the usage
sites.
Fixes: 76e2fc63ca40 ("x86/cpu/amd: Set __max_die_per_package on AMD")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210114111814.5346-1-bp@alien8.de
|
|
The registers used to determine which die a pci bus belongs to don't
contain enough information to uniquely specify more than 8 dies, so
when more than 8 dies are present, use NUMA information instead.
Continue to use the previous method for 8 or fewer because it
works there, and covers cases of NUMA being disabled.
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lkml.kernel.org/r/20210108153549.108989-3-steve.wahl@hpe.com
|
|
The phys_id isn't really used other than to map to a logical die id.
Calculate the logical die id earlier, and store that instead of the
phys_id.
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lkml.kernel.org/r/20210108153549.108989-2-steve.wahl@hpe.com
|
|
The Camellia, Serpent and Twofish related header files only contain
declarations that are shared between different implementations of the
respective algorithms residing under arch/x86/crypto, and none of their
contents should be used elsewhere. So move the header files into the
same location, and use local #includes instead.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
All dependencies on the x86 glue helper module have been replaced by
local instantiations of the new ECB/CBC preprocessor helper macros, so
the glue helper module can be retired.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Replace the glue helper dependency with implementations of ECB and CBC
based on the new CPP macros, which avoid the need for indirect calls.
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
