| Age | Commit message (Collapse) | Author |
|---|
|
The legacy API for setting the TSC is fundamentally broken, and only
allows userspace to set a TSC "now", without any way to account for
time lost between the calculation of the value, and the kernel eventually
handling the ioctl.
To work around this, KVM has a hack which, if a TSC is set with a value
which is within a second's worth of the last TSC "written" to any vCPU in
the VM, assumes that userspace actually intended the two TSC values to be
in sync and adjusts the newly-written TSC value accordingly.
Thus, when a VMM restores a guest after suspend or migration using the
legacy API, the TSCs aren't necessarily *right*, but at least they're
in sync.
This trick falls down when restoring a guest which genuinely has been
running for less time than the 1 second of imprecision KVM allows for in
in the legacy API. On *creation*, the first vCPU starts its TSC counting
from zero, and the subsequent vCPUs synchronize to that. But then when
the VMM tries to restore a vCPU's intended TSC, because the VM has been
alive for less than 1 second and KVM's default TSC value for new vCPU's is
'0', the intended TSC is within a second of the last "written" TSC and KVM
incorrectly adjusts the intended TSC in an attempt to synchronize.
But further hacks can be piled onto KVM's existing hackish ABI, and
declare that the *first* value written by *userspace* (on any vCPU)
should not be subject to this "correction", i.e. KVM can assume that the
first write from userspace is not an attempt to sync up with TSC values
that only come from the kernel's default vCPU creation.
To that end: Add a flag, kvm->arch.user_set_tsc, protected by
kvm->arch.tsc_write_lock, to record that a TSC for at least one vCPU in
the VM *has* been set by userspace, and make the 1-second slop hack only
trigger if user_set_tsc is already set.
Note that userspace can explicitly request a *synchronization* of the
TSC by writing zero. For the purpose of user_set_tsc, an explicit
synchronization counts as "setting" the TSC, i.e. if userspace then
subsequently writes an explicit non-zero value which happens to be within
1 second of the previous value, the new value will be "corrected". This
behavior is deliberate, as treating explicit synchronization as "setting"
the TSC preserves KVM's existing behaviour inasmuch as possible (KVM
always applied the 1-second "correction" regardless of whether the write
came from userspace vs. the kernel).
Reported-by: Yong He <alexyonghe@tencent.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217423
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Original-by: Oliver Upton <oliver.upton@linux.dev>
Original-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Tested-by: Yong He <alexyonghe@tencent.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20231008025335.7419-1-likexu@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When guest MTRRs are updated, zap SPTEs and do zap range calcluation if and
only if KVM's MMU is honoring guest MTRRs, which is the only time that KVM
incorporates the guest's MTRR type into the final memtype.
Suggested-by: Chao Gao <chao.gao@intel.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Cc: Kai Huang <kai.huang@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/r/20230714065156.20375-1-yan.y.zhao@intel.com
[sean: rephrase shortlog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Zap SPTEs when CR0.CD is toggled if and only if KVM's MMU is honoring
guest MTRRs, which is the only time that KVM incorporates the guest's
CR0.CD into the final memtype.
Suggested-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/r/20230714065122.20315-1-yan.y.zhao@intel.com
[sean: rephrase shortlog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add helpers to check if KVM honors guest MTRRs instead of open coding the
logic in kvm_tdp_page_fault(). Future fixes and cleanups will also need
to determine if KVM should honor guest MTRRs, e.g. for CR0.CD toggling and
and non-coherent DMA transitions.
Provide an inner helper, __kvm_mmu_honors_guest_mtrrs(), so that KVM can
check if guest MTRRs were honored when stopping non-coherent DMA.
Note, there is no need to explicitly check that TDP is enabled, KVM clears
shadow_memtype_mask when TDP is disabled, i.e. it's non-zero if and only
if EPT is enabled.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/r/20230714065006.20201-1-yan.y.zhao@intel.com
Link: https://lore.kernel.org/r/20230714065043.20258-1-yan.y.zhao@intel.com
[sean: squash into a one patch, drop explicit TDP check massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
On certain CPUs, Linux guests expect HWCR.TscFreqSel[bit 24] to be
set. If it isn't set, they complain:
[Firmware Bug]: TSC doesn't count with P0 frequency!
Allow userspace (and the guest) to set this bit in the virtual HWCR to
eliminate the above complaint.
Allow the guest to write the bit even though its is R/O on *some* CPUs.
Like many bits in HWRC, TscFreqSel is not architectural at all. On Family
10h[1], it was R/W and powered on as 0. In Family 15h, one of the "changes
relative to Family 10H Revision D processors[2] was:
• MSRC001_0015 [Hardware Configuration (HWCR)]:
• Dropped TscFreqSel; TSC can no longer be selected to run at NB P0-state.
Despite the "Dropped" above, that same document later describes
HWCR[bit 24] as follows:
TscFreqSel: TSC frequency select. Read-only. Reset: 1. 1=The TSC
increments at the P0 frequency
If the guest clears the bit, the worst case scenario is the guest will be
no worse off than it is today, e.g. the whining may return after a guest
clears the bit and kexec()'s into a new kernel.
[1] https://www.amd.com/content/dam/amd/en/documents/archived-tech-docs/programmer-references/31116.pdf
[2] https://www.amd.com/content/dam/amd/en/documents/archived-tech-docs/programmer-references/42301_15h_Mod_00h-0Fh_BKDG.pdf,
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20230929230246.1954854-3-jmattson@google.com
[sean: elaborate on why the bit is writable by the guest]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When HWCR is set to 0, store 0 in vcpu->arch.msr_hwcr.
Fixes: 191c8137a939 ("x86/kvm: Implement HWCR support")
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20230929230246.1954854-2-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Introduce the arch_sync_try_cmpxchg() macro to improve code using
sync_try_cmpxchg() locking primitive. The new definitions use existing
__raw_try_cmpxchg() macros, but use its own "lock; " prefix.
The new macros improve assembly of the cmpxchg loop in
evtchn_fifo_unmask() from drivers/xen/events/events_fifo.c from:
57a: 85 c0 test %eax,%eax
57c: 78 52 js 5d0 <...>
57e: 89 c1 mov %eax,%ecx
580: 25 ff ff ff af and $0xafffffff,%eax
585: c7 04 24 00 00 00 00 movl $0x0,(%rsp)
58c: 81 e1 ff ff ff ef and $0xefffffff,%ecx
592: 89 4c 24 04 mov %ecx,0x4(%rsp)
596: 89 44 24 08 mov %eax,0x8(%rsp)
59a: 8b 74 24 08 mov 0x8(%rsp),%esi
59e: 8b 44 24 04 mov 0x4(%rsp),%eax
5a2: f0 0f b1 32 lock cmpxchg %esi,(%rdx)
5a6: 89 04 24 mov %eax,(%rsp)
5a9: 8b 04 24 mov (%rsp),%eax
5ac: 39 c1 cmp %eax,%ecx
5ae: 74 07 je 5b7 <...>
5b0: a9 00 00 00 40 test $0x40000000,%eax
5b5: 75 c3 jne 57a <...>
<...>
to:
578: a9 00 00 00 40 test $0x40000000,%eax
57d: 74 2b je 5aa <...>
57f: 85 c0 test %eax,%eax
581: 78 40 js 5c3 <...>
583: 89 c1 mov %eax,%ecx
585: 25 ff ff ff af and $0xafffffff,%eax
58a: 81 e1 ff ff ff ef and $0xefffffff,%ecx
590: 89 4c 24 04 mov %ecx,0x4(%rsp)
594: 89 44 24 08 mov %eax,0x8(%rsp)
598: 8b 4c 24 08 mov 0x8(%rsp),%ecx
59c: 8b 44 24 04 mov 0x4(%rsp),%eax
5a0: f0 0f b1 0a lock cmpxchg %ecx,(%rdx)
5a4: 89 44 24 04 mov %eax,0x4(%rsp)
5a8: 75 30 jne 5da <...>
<...>
5da: 8b 44 24 04 mov 0x4(%rsp),%eax
5de: eb 98 jmp 578 <...>
The new code removes move instructions from 585: 5a6: and 5a9:
and the compare from 5ac:. Additionally, the compiler assumes that
cmpxchg success is more probable and optimizes code flow accordingly.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Unified Memory Controller (UMC) events were introduced with Zen 4 as a
part of the Performance Monitoring Version 2 (PerfMonV2) enhancements.
An event is specified using the EventSelect bits and the RdWrMask bits
can be used for additional filtering of read and write requests.
As of now, a maximum of 12 channels of DDR5 are available on each socket
and each channel is controlled by a dedicated UMC. Each UMC, in turn,
has its own set of performance monitoring counters.
Since the MSR address space for the UMC PERF_CTL and PERF_CTR registers
are reused across sockets, uncore groups are created on the basis of
socket IDs. Hence, group exclusivity is mandatory while opening events
so that events for an UMC can only be opened on CPUs which are on the
same socket as the corresponding memory channel.
For each socket, the total number of available UMC counters and active
memory channels are determined from CPUID leaf 0x80000022 EBX and ECX
respectively. Usually, on Zen 4, each UMC has four counters.
MSR assignments are determined on the basis of active UMCs. E.g. if
UMCs 1, 4 and 9 are active for a given socket, then
* UMC 1 gets MSRs 0xc0010800 to 0xc0010807 as PERF_CTLs and PERF_CTRs
* UMC 4 gets MSRs 0xc0010808 to 0xc001080f as PERF_CTLs and PERF_CTRs
* UMC 9 gets MSRs 0xc0010810 to 0xc0010817 as PERF_CTLs and PERF_CTRs
If there are sockets without any online CPUs when the amd_uncore driver
is loaded, UMCs for such sockets will not be discoverable since the
mechanism relies on executing the CPUID instruction on an online CPU
from the socket.
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/b25f391205c22733493abec1ed850b71784edc5f.1696425185.git.sandipan.das@amd.com
|
|
In some cases, it may be necessary to restrict opening PMU events to a
subset of CPUs. E.g. Unified Memory Controller (UMC) PMUs are specific
to each active memory channel and the MSR address space for the PERF_CTL
and PERF_CTR registers is reused on each socket. Thus, opening events
for a specific UMC PMU should be restricted to CPUs belonging to the
same socket as that of the UMC. The "cpumask" of the PMU should also
reflect this accordingly.
Uncore PMUs which require this can use the new group attribute in struct
amd_uncore_pmu to set a valid group ID during the scan() phase. Later,
during init(), an uncore context for a CPU will be unavailable if the
group ID does not match.
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/937d6d71010a48ea4e069f4904b3116a5f99ecdf.1696425185.git.sandipan.das@amd.com
|
|
Not all uncore PMUs may support the use of the RDPMC instruction for
reading counters. In such cases, read the count from the corresponding
PERF_CTR register using the RDMSR instruction.
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/e9d994e32a3fcb39fa59fcf43ab4260d11aba097.1696425185.git.sandipan.das@amd.com
|
|
Uncore PMUs have traditionally been registered in the module init path.
This is fine for the existing DF and L3 PMUs since the CPUID information
does not vary across CPUs but not for the memory controller (UMC) PMUs
since information like active memory channels can vary for each socket
depending on how the DIMMs have been physically populated.
To overcome this, the discovery of PMU information using CPUID is moved
to the startup of UNCORE_STARTING. This cannot be done in the startup of
UNCORE_PREP since the hotplug callback does not run on the CPU that is
being brought online.
Previously, the startup of UNCORE_PREP was used for allocating uncore
contexts following which, the startup of UNCORE_STARTING was used to
find and reuse an existing sibling context, if possible. Any unused
contexts were added to a list for reclaimation later during the startup
of UNCORE_ONLINE.
Since all required CPUID info is now available only after the startup of
UNCORE_STARTING has completed, context allocation has been moved to the
startup of UNCORE_ONLINE. Before allocating contexts, the first CPU that
comes online has to take up the additional responsibility of registering
the PMUs. This is a one-time process though. Since sibling discovery now
happens prior to deciding whether a new context is required, there is no
longer a need to track and free up unused contexts.
The teardown of UNCORE_ONLINE and UNCORE_PREP functionally remain the
same.
Overall, the flow of control described above is achieved using the
following handlers for managing uncore PMUs. It is mandatory to define
them for each type of uncore PMU.
* scan() runs during startup of UNCORE_STARTING and collects PMU info
using CPUID.
* init() runs during startup of UNCORE_ONLINE, registers PMUs and sets
up uncore contexts.
* move() runs during teardown of UNCORE_ONLINE and migrates uncore
contexts to a shared sibling, if possible.
* free() runs during teardown of UNCORE_PREP and frees up uncore
contexts.
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/e6c447e48872fcab8452e0dd81b1c9cb09f39eb4.1696425185.git.sandipan.das@amd.com
|
|
Since struct amd_uncore is used to manage per-cpu contexts, rename it to
amd_uncore_ctx in order to better reflect its purpose. Add a new struct
amd_uncore_pmu to encapsulate all attributes which are shared by per-cpu
contexts for a corresponding PMU. These include the number of counters,
active mask, MSR and RDPMC base addresses, etc. Since the struct pmu is
now embedded, the corresponding amd_uncore_pmu for a given event can be
found by simply using container_of().
Finally, move all PMU-specific code to separate functions. While the
original event management functions continue to provide the base
functionality, all PMU-specific quirks and customizations are applied in
separate functions.
The motivation is to simplify the management of uncore PMUs.
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/24b38c49a5dae65d8c96e5d75a2b96ae97aaa651.1696425185.git.sandipan.das@amd.com
|
|
The MSR registers for reading the package residency counters are
available on every CPU of the package. To avoid doing unnecessary SMP
calls to read the values for these from the various CPUs inside a
package, allow reading them from any CPU of the package.
Suggested-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230912124432.3616761-2-tero.kristo@linux.intel.com
|
|
Check the IO permission bitmap (if present) before emulating IOIO #VC
exceptions for user-space. These permissions are checked by hardware
already before the #VC is raised, but due to the VC-handler decoding
race it needs to be checked again in software.
Fixes: 25189d08e516 ("x86/sev-es: Add support for handling IOIO exceptions")
Reported-by: Tom Dohrmann <erbse.13@gmx.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Tom Dohrmann <erbse.13@gmx.de>
Cc: <stable@kernel.org>
|
|
A virt scenario can be constructed where MMIO memory can be user memory.
When that happens, a race condition opens between when the hardware
raises the #VC and when the #VC handler gets to emulate the instruction.
If the MOVS is replaced with a MOVS accessing kernel memory in that
small race window, then write to kernel memory happens as the access
checks are not done at emulation time.
Disable MMIO emulation in user mode temporarily until a sensible use
case appears and justifies properly handling the race window.
Fixes: 0118b604c2c9 ("x86/sev-es: Handle MMIO String Instructions")
Reported-by: Tom Dohrmann <erbse.13@gmx.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Tom Dohrmann <erbse.13@gmx.de>
Cc: <stable@kernel.org>
|
|
Some parameters or return codes were either wrong or missing,
update them.
Signed-off-by: Lucy Mielke <lucymielke@icloud.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/ZSOjQW3e2nJR4bAo@fedora.fritz.box
|
|
We found that a panic can occur when a vsyscall is made while LBR sampling
is active. If the vsyscall is interrupted (NMI) for perf sampling, this
call sequence can occur (most recent at top):
__insn_get_emulate_prefix()
insn_get_emulate_prefix()
insn_get_prefixes()
insn_get_opcode()
decode_branch_type()
get_branch_type()
intel_pmu_lbr_filter()
intel_pmu_handle_irq()
perf_event_nmi_handler()
Within __insn_get_emulate_prefix() at frame 0, a macro is called:
peek_nbyte_next(insn_byte_t, insn, i)
Within this macro, this dereference occurs:
(insn)->next_byte
Inspecting registers at this point, the value of the next_byte field is the
address of the vsyscall made, for example the location of the vsyscall
version of gettimeofday() at 0xffffffffff600000. The access to an address
in the vsyscall region will trigger an oops due to an unhandled page fault.
To fix the bug, filtering for vsyscalls can be done when
determining the branch type. This patch will return
a "none" branch if a kernel address if found to lie in the
vsyscall region.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
|
|
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS=y (for
array indexing) and CONFIG_FORTIFY_SOURCE=y (for strcpy/memcpy-family
functions).
Found with Coccinelle:
https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1]
Add __counted_by for 'struct rapl_pmus'.
No change in functionality intended.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20231006201754.work.473-kees@kernel.org
|
|
The kernel test robot reported kernel-doc warnings here:
monitor.c:34: warning: Cannot understand * @rmid_free_lru A least recently used list of free RMIDs on line 34 - I thought it was a doc line
monitor.c:41: warning: Cannot understand * @rmid_limbo_count count of currently unused but (potentially) on line 41 - I thought it was a doc line
monitor.c:50: warning: Cannot understand * @rmid_entry - The entry in the limbo and free lists. on line 50 - I thought it was a doc line
We don't have a syntax for documenting individual data items via
kernel-doc, so remove the "/**" kernel-doc markers and add a hyphen
for consistency.
Fixes: 6a445edce657 ("x86/intel_rdt/cqm: Add RDT monitoring initialization")
Fixes: 24247aeeabe9 ("x86/intel_rdt/cqm: Improve limbo list processing")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20231006235132.16227-1-rdunlap@infradead.org
|
|
performance
Commit bf5835bcdb96 ("intel_idle: Disable IBRS during long idle")
disables IBRS when the CPU enters long idle. However, when a CPU
becomes offline, the IBRS bit is still set when X86_FEATURE_KERNEL_IBRS
is enabled. That will impact the performance of a sibling CPU. Mitigate
this performance impact by clearing all the mitigation bits in SPEC_CTRL
MSR when offline. When the CPU is online again, it will be re-initialized
and so restoring the SPEC_CTRL value isn't needed.
Add a comment to say that native_play_dead() is a __noreturn function,
but it can't be marked as such to avoid confusion about the missing
MSR restoration code.
When DPDK is running on an isolated CPU thread processing network packets
in user space while its sibling thread is idle. The performance of the
busy DPDK thread with IBRS on and off in the sibling idle thread are:
IBRS on IBRS off
------- --------
packets/second: 7.8M 10.4M
avg tsc cycles/packet: 282.26 209.86
This is a 25% performance degradation. The test system is a Intel Xeon
4114 CPU @ 2.20GHz.
[ mingo: Extended the changelog with performance data from the 0/4 mail. ]
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20230727184600.26768-3-longman@redhat.com
|
|
Add a new __update_spec_ctrl() helper which is a variant of
update_spec_ctrl() that can be used in a noinstr function.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20230727184600.26768-2-longman@redhat.com
|
|
Recently, we found that cross-die access to pagetable pages on ARM64
machines can cause performance fluctuations in our business. Currently,
there are no PMU events available to track this situation on our ARM64
machines, so accurate pagetable accounting can help to analyze this issue,
but now the PUD level pagetable accounting is missed.
So introduce pagetable_pud_ctor/dtor() to help to get accurate PUD
pagetable accounting, as well as converting the architectures which use
generic PUD pagetable allocation to add corresponding PUD pagetable
accounting. Moreover this patch will mark the PUD level pagetable with
PG_table flag, which will help to do sanity validation in
unpoison_memory().
On my testing machine, I can see more pagetables statistics after the patch
with page-types tool:
Before patch:
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000004000000 27326 106 __________________________g_________________ pgtable
After patch:
0x0000000004000000 27541 107 __________________________g_________________ pgtable
Link: https://lkml.kernel.org/r/876c71c03a7e69c17722a690e3225a4f7b172fb2.1695017383.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
commit c35559f94ebc ("x86/shstk: Introduce map_shadow_stack syscall")
recently added support for map_shadow_stack() but it is limited to x86
only for now. There is a possibility that other architectures (namely,
arm64 and RISC-V), that are implementing equivalent support for shadow
stacks, might need to add support for it.
Independent of that, reserving arch-specific syscall numbers in the
syscall tables of all architectures is good practice and would help
avoid future conflicts. map_shadow_stack() is marked as a conditional
syscall in sys_ni.c. Adding it to the syscall tables of other
architectures is harmless and would return ENOSYS when exercised.
Note, map_shadow_stack() was assigned #453 during the merge process
since #452 was taken by fchmodat2().
For Powerpc, map it to sys_ni_syscall() as is the norm for Powerpc
syscall tables.
For Alpha, map_shadow_stack() takes up #563 as Alpha still diverges from
the common syscall numbering system in the other architectures.
Link: https://lore.kernel.org/lkml/20230515212255.GA562920@debug.ba.rivosinc.com/
Link: https://lore.kernel.org/lkml/b402b80b-a7c6-4ef0-b977-c0f5f582b78a@sirena.org.uk/
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
In x86 virtualization environments, including TDX, RDTSC instruction is
handled without causing a VM exit, resulting in minimal overhead and
jitters. On the other hand, other clock sources (such as HPET, ACPI
timer, APIC, etc.) necessitate VM exits to implement, resulting in more
fluctuating measurements compared to TSC. Thus, those clock sources are
not effective for calibrating TSC.
As a foundation, the host TSC is guaranteed to be invariant on any
system which enumerates TDX support.
TDX guests and the TDX module build on that foundation by enforcing:
- Virtual TSC is monotonously incrementing for any single VCPU;
- Virtual TSC values are consistent among all the TD’s VCPUs at the
level supported by the CPU:
+ VMM is required to set the same TSC_ADJUST;
+ VMM must not modify from initial value of TSC_ADJUST before
SEAMCALL;
- The frequency is determined by TD configuration:
+ Virtual TSC frequency is specified by VMM on TDH.MNG.INIT;
+ Virtual TSC starts counting from 0 at TDH.MNG.INIT;
The result is that a reliable TSC is a TDX architectural guarantee.
Use the TSC as the only reliable clock source in TD guests, bypassing
unstable calibration.
This is similar to what the kernel already does in some VMWare and
HyperV environments.
[ dhansen: changelog tweaks ]
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Erdem Aktas <erdemaktas@google.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/all/20231006144549.2633-1-kirill.shutemov%40linux.intel.com
|
|
Iain reports that USB devices can't be used to wake a Lenovo Z13 from
suspend. This occurs because on some AMD platforms, even though the Root
Ports advertise PME_Support for D3hot and D3cold, wakeup events from
devices on a USB4 controller don't result in wakeup interrupts from the
Root Port when amd-pmc has put the platform in a hardware sleep state.
If amd-pmc will be involved in the suspend, remove D3hot and D3cold from
the PME_Support mask of Root Ports above USB4 controllers so we avoid those
states if we need wakeups.
Restore D3 support at resume so that it can be used by runtime suspend.
This affects both AMD Rembrandt and Phoenix SoCs.
"pm_suspend_target_state == PM_SUSPEND_ON" means we're doing runtime
suspend, and amd-pmc will not be involved. In that case PMEs work as
advertised in D3hot/D3cold, so we don't need to do anything.
Note that amd-pmc is technically optional, and there's no need for this
quirk if it's not present, but we assume it's always present because power
consumption is so high without it.
Fixes: 9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend")
Link: https://lore.kernel.org/r/20231004144959.158840-1-mario.limonciello@amd.com
Reported-by: Iain Lane <iain@orangesquash.org.uk>
Closes: https://forums.lenovo.com/t5/Ubuntu/Z13-can-t-resume-from-suspend-with-external-USB-keyboard/m-p/5217121
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
[bhelgaas: commit log, move to arch/x86/pci/fixup.c, add #includes]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
|
|
IFS generation number is reported via MSR_INTEGRITY_CAPS. As IFS
support gets added to newer CPUs, some differences are expected during
IFS image loading and test flows.
Define MSR bitmasks to extract and store the generation in driver data,
so that driver can modify its MSR interaction appropriately.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/20231005195137.3117166-2-jithu.joseph@intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
When populating the guest's PV wall clock information, KVM currently does
a simple 'kvm_get_real_ns() - get_kvmclock_ns(kvm)'. This is an antipattern
which should be avoided; when working with the relationship between two
clocks, it's never correct to obtain one of them "now" and then the other
at a slightly different "now" after an unspecified period of preemption
(which might not even be under the control of the kernel, if this is an
L1 hosting an L2 guest under nested virtualization).
Add a kvm_get_wall_clock_epoch() function to return the guest wall clock
epoch in nanoseconds using the same method as __get_kvmclock() — by using
kvm_get_walltime_and_clockread() to calculate both the wall clock and KVM
clock time from a *single* TSC reading.
The condition using get_cpu_tsc_khz() is equivalent to the version in
__get_kvmclock() which separately checks for the CONSTANT_TSC feature or
the per-CPU cpu_tsc_khz. Which is what get_cpu_tsc_khz() does anyway.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/bfc6d3d7cfb88c47481eabbf5a30a264c58c7789.camel@infradead.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts (or adjacent changes of note).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the alignment of each field in struct aesni_xts_ctx occurs
right before every access. However, it's possible to perform this
alignment ahead of time.
Introduce a helper function that converts struct crypto_skcipher *tfm
to struct aesni_xts_ctx *ctx and returns an aligned address. Utilize
this helper function at the beginning of each XTS function and then
eliminate redundant alignment code.
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/all/ZFWQ4sZEVu%2FLHq+Q@gmail.com/
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Cc: linux-crypto@vger.kernel.org
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Currently, every field in struct aesni_xts_ctx is defined as a byte
array of the same size as struct crypto_aes_ctx. This data type
is obscure and the choice lacks justification.
To rectify this, update the field type in struct aesni_xts_ctx to
match its actual structure.
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/all/ZFWQ4sZEVu%2FLHq+Q@gmail.com/
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Cc: linux-crypto@vger.kernel.org
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The address alignment code has been duplicated for each mode. Instead
of duplicating the same code, refactor the alignment code and simplify
the alignment helpers.
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/all/20230526065414.GB875@sol.localdomain/
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Cc: linux-crypto@vger.kernel.org
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
SEP must be already be present in order for do_fast_syscall_32() to be
called on native 32-bit, so checking it again is unnecessary.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230721161018.50214-6-brgerst@gmail.com
|
|
Doesn't have to be 'long' - this simplifies the code a bit.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230721161018.50214-5-brgerst@gmail.com
|
|
Move the sysret32_from_system_call label to remove a duplicate test of
the return value from the syscall handler.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230721161018.50214-4-brgerst@gmail.com
|
|
This comment comes from a time when the kernel attempted to use SYSRET
on all returns to userspace, including interrupts and exceptions. Ever
since commit fffbb5dc ("Move opportunistic sysret code to syscall code
path"), SYSRET is only used for returning from system calls. The
specific tracing issue listed in this comment is not possible anymore.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20230721161018.50214-2-brgerst@gmail.com
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Upstream Xen now ignores _VCPU_SSHOTTMR_future[1], since the only guest
kernel ever to use it was buggy. By ignoring the flag the guest will
always get a callback if it sets a negative timeout which upstream Xen
has determined not to cause problems for any guest setting the flag.
[1] https://xenbits.xen.org/gitweb/?p=xen.git;a=commitdiff;h=19c6cbd909
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20231004174628.2073263-1-paul@xen.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add support for the AMD Selective Branch Predictor Barrier (SBPB) by
advertising the CPUID bit and handling PRED_CMD writes accordingly.
Note, like SRSO_NO and IBPB_BRTYPE before it, advertise support for SBPB
even if it's not enumerated by in the raw CPUID. Some CPUs that gained
support via a uCode patch don't report SBPB via CPUID (the kernel forces
the flag).
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/a4ab1e7fe50096d50fde33e739ed2da40b41ea6a.1692919072.git.jpoimboe@kernel.org
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add support for the IBPB_BRTYPE CPUID flag, which indicates that IBPB
includes branch type prediction flushing.
Note, like SRSO_NO, advertise support for IBPB_BRTYPE even if it's not
enumerated by in the raw CPUID, i.e. bypass the cpuid_count() in
__kvm_cpu_cap_mask(). Some CPUs that gained support via a uCode patch
don't report IBPB_BRTYPE via CPUID (the kernel forces the flag).
Opportunistically use kvm_cpu_cap_check_and_set() for SRSO_NO instead
of manually querying host support (cpu_feature_enabled() and
boot_cpu_has() yield the same end result in this case).
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/79d5f5914fb42c2c62418ffbcd78f138645ded21.1692919072.git.jpoimboe@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Treat EMULTYPE_SKIP failures on SEV guests as unhandleable emulation
instead of simply resuming the guest, and drop the hack-a-fix which
effects that behavior for the INT3/INTO injection path. If KVM can't
skip an instruction for which KVM has already done partial emulation,
resuming the guest is undesirable as doing so may corrupt guest state.
Link: https://lore.kernel.org/r/20230825013621.2845700-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Refactor and rename can_emulate_instruction() to allow vendor code to
return more than true/false, e.g. to explicitly differentiate between
"retry", "fault", and "unhandleable". For now, just do the plumbing, a
future patch will expand SVM's implementation to signal outright failure
if KVM attempts EMULTYPE_SKIP on an SEV guest.
No functional change intended (or rather, none that are visible to the
guest or userspace).
Link: https://lore.kernel.org/r/20230825013621.2845700-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
rcu_report_dead() and rcutree_migrate_callbacks() have their headers in
rcupdate.h while those are pure rcutree calls, like the other CPU-hotplug
functions.
Also rcu_cpu_starting() and rcu_report_dead() have different naming
conventions while they mirror each other's effects.
Fix the headers and propose a naming that relates both functions and
aligns with the prefix of other rcutree CPU-hotplug functions.
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
Most of the time there's no need to kick the vCPU and deliver the timer
event through kvm_xen_inject_timer_irqs(). Use kvm_xen_set_evtchn_fast()
directly from the timer callback, and only fall back to the slow path if
delivering the timer would block, i.e. if kvm_xen_set_evtchn_fast()
returns -EWOULDBLOCK. If delivery fails for any other reason, do nothing
and just let it fail silently, as that is what the slow path would end up
doing anyways.
This gives a significant improvement in timer latency testing (using
nanosleep() for various periods and then measuring the actual time
elapsed).
However, there was a reason[1] the fast path was dropped when this support
was first added. The current code holds vcpu->mutex for all operations on
the kvm->arch.timer_expires field, and the fast path introduces a
potential race condition. Avoid that race by ensuring the hrtimer is
(temporarily) cancelled before making changes in kvm_xen_start_timer(),
and also when reading the values out for KVM_XEN_VCPU_ATTR_TYPE_TIMER.
[1] https://lore.kernel.org/kvm/846caa99-2e42-4443-1070-84e49d2f11d2@redhat.com
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/f21ee3bd852761e7808240d4ecaec3013c649dc7.camel@infradead.org
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When CONFIG_KVM_XEN=n, the size of kvm_vcpu_arch can be reduced
from 5100+ to 4400+ by adding macro control.
Signed-off-by: Peng Hao <flyingpeng@tencent.com>
Link: https://lore.kernel.org/all/CAPm50aKwbZGeXPK5uig18Br8CF1hOS71CE2j_dLX+ub7oJdpGg@mail.gmail.com
[sean: fix whitespace damage]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
With the help of newly changed function parse_crashkernel() and generic
reserve_crashkernel_generic(), crashkernel reservation can be simplified
by steps:
1) Add a new header file <asm/crash_core.h>, and define CRASH_ALIGN,
CRASH_ADDR_LOW_MAX, CRASH_ADDR_HIGH_MAX and
DEFAULT_CRASH_KERNEL_LOW_SIZE in <asm/crash_core.h>;
2) Add arch_reserve_crashkernel() to call parse_crashkernel() and
reserve_crashkernel_generic(), and do the ARCH specific work if
needed.
3) Add ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION Kconfig in
arch/x86/Kconfig.
When adding DEFAULT_CRASH_KERNEL_LOW_SIZE, add crash_low_size_default() to
calculate crashkernel low memory because x86_64 has special requirement.
The old reserve_crashkernel_low() and reserve_crashkernel() can be
removed.
[bhe@redhat.com: move crash_low_size_default() code into <asm/crash_core.h>]
Link: https://lkml.kernel.org/r/ZQpeAjOmuMJBFw1/@MiWiFi-R3L-srv
Link: https://lkml.kernel.org/r/20230914033142.676708-7-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Jiahao <chenjiahao16@huawei.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add two parameters 'low_size' and 'high' to function parse_crashkernel(),
later crashkernel=,high|low parsing will be added. Make adjustments in
all call sites of parse_crashkernel() in arch.
Link: https://lkml.kernel.org/r/20230914033142.676708-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Jiahao <chenjiahao16@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use new APIs to dynamically allocate the x86-mmu shrinker.
Link: https://lkml.kernel.org/r/20230911094444.68966-3-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Rewrite local_add_unless() as a static inline function with boolean
return value, similar to the arch_atomic_add_unless() arch fallbacks.
The function is currently unused.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230731084458.28096-1-ubizjak@gmail.com
|
|
strncpy() works perfectly here in all cases, however, it is deprecated and
as such we should prefer more robust and less ambiguous string APIs:
https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings
Let's use strtomem_pad() as this matches the functionality of strncpy()
and is _not_ deprecated.
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://github.com/KSPP/linux/issues/90
Link: https://lore.kernel.org/r/20231003-strncpy-arch-x86-coco-tdx-tdx-c-v2-1-0bd21174a217@google.com
|
