summaryrefslogtreecommitdiff
path: root/arch/x86
AgeCommit message (Collapse)Author
2010-10-11x86, numa: For each node, register the memory blocks actually usedYinghai Lu
Russ reported SGI UV is broken recently. He said: | The SRAT table shows that memory range is spread over two nodes. | | SRAT: Node 0 PXM 0 100000000-800000000 | SRAT: Node 1 PXM 1 800000000-1000000000 | SRAT: Node 0 PXM 0 1000000000-1080000000 | |Previously, the kernel early_node_map[] would show three entries |with the proper node. | |[ 0.000000] 0: 0x00100000 -> 0x00800000 |[ 0.000000] 1: 0x00800000 -> 0x01000000 |[ 0.000000] 0: 0x01000000 -> 0x01080000 | |The problem is recent community kernel early_node_map[] shows |only two entries with the node 0 entry overlapping the node 1 |entry. | | 0: 0x00100000 -> 0x01080000 | 1: 0x00800000 -> 0x01000000 After looking at the changelog, Found out that it has been broken for a while by following commit |commit 8716273caef7f55f39fe4fc6c69c5f9f197f41f1 |Author: David Rientjes <rientjes@google.com> |Date: Fri Sep 25 15:20:04 2009 -0700 | | x86: Export srat physical topology Before that commit, register_active_regions() is called for every SRAT memory entry right away. Use nodememblk_range[] instead of nodes[] in order to make sure we capture the actual memory blocks registered with each node. nodes[] contains an extended range which spans all memory regions associated with a node, but that does not mean that all the memory in between are included. Reported-by: Russ Anderson <rja@sgi.com> Tested-by: Russ Anderson <rja@sgi.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <4CB27BDF.5000800@kernel.org> Acked-by: David Rientjes <rientjes@google.com> Cc: <stable@kernel.org> 2.6.33 .34 .35 .36 Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-10-11KVM: x86: Move TSC reset out of vmcb_initZachary Amsden
The VMCB is reset whenever we receive a startup IPI, so Linux is setting TSC back to zero happens very late in the boot process and destabilizing the TSC. Instead, just set TSC to zero once at VCPU creation time. Why the separate patch? So git-bisect is your friend. Signed-off-by: Zachary Amsden <zamsden@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-11KVM: x86: Fix SVM VMCB resetZachary Amsden
On reset, VMCB TSC should be set to zero. Instead, code was setting tsc_offset to zero, which passes through the underlying TSC. Signed-off-by: Zachary Amsden <zamsden@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-11x86, AMD, MCE thresholding: Fix the MCi_MISCj iteration orderBorislav Petkov
This fixes possible cases of not collecting valid error info in the MCE error thresholding groups on F10h hardware. The current code contains a subtle problem of checking only the Valid bit of MSR0000_0413 (which is MC4_MISC0 - DRAM thresholding group) in its first iteration and breaking out if the bit is cleared. But (!), this MSR contains an offset value, BlkPtr[31:24], which points to the remaining MSRs in this thresholding group which might contain valid information too. But if we bail out only after we checked the valid bit in the first MSR and not the block pointer too, we miss that other information. The thing is, MC4_MISC0[BlkPtr] is not predicated on MCi_STATUS[MiscV] or MC4_MISC0[Valid] and should be checked prior to iterating over the MCI_MISCj thresholding group, irrespective of the MC4_MISC0[Valid] setting. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-09bitops: make asm-generic/bitops/find.h more genericAkinobu Mita
asm-generic/bitops/find.h has the extern declarations of find_next_bit() and find_next_zero_bit() and the macro definitions of find_first_bit() and find_first_zero_bit(). It is only usable by the architectures which enables CONFIG_GENERIC_FIND_NEXT_BIT and disables CONFIG_GENERIC_FIND_FIRST_BIT. x86 and tile enable both CONFIG_GENERIC_FIND_NEXT_BIT and CONFIG_GENERIC_FIND_FIRST_BIT. These architectures cannot include asm-generic/bitops/find.h in their asm/bitops.h. So ifdefed extern declarations of find_first_bit and find_first_zero_bit() are put in linux/bitops.h. This makes asm-generic/bitops/find.h usable by these architectures and use it. Also this change is needed for the forthcoming duplicated extern declarations cleanup. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: Chris Metcalf <cmetcalf@tilera.com>
2010-10-08x86, iommu: Update header comments with appropriate namingKonrad Rzeszutek Wilk
The header comments diverged a bit from the implementation. Lets re-sync them. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> LKML-Reference: <1286564028-2352-3-git-send-email-konrad.wilk@oracle.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-10-08Merge commit 'v2.6.36-rc7' into perf/coreIngo Molnar
Conflicts: arch/x86/kernel/module.c Merge reason: Resolve the conflict, pick up fixes. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-08x86, mce, therm_throt.c: Fix missing curly braces in error handling logicJin Dongming
When the feature PTS is not supported by CPU, the sysfile package_power_limit_count for package should not be generated. This patch is used for fixing missing { and }. The patch is not complete as there are other error handling problems in this function - but that can wait until the merge window. Signed-off-by: Jin Dongming <jin.dongming@np.css.fujitsu.com> Reviewed-by: Fenghua Yu <fenghua.yu@initel.com> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: Brown Len <len.brown@intel.com> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: lm-sensors@lm-sensors.org <lm-sensors@lm-sensors.org> LKML-Reference: <4C7625D1.4060201@np.css.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-08x86, olpc: Don't retry EC commands foreverPaul Fox
Avoids a potential infinite loop. It was observed once, during an EC hacking/debugging session - not in regular operation. Signed-off-by: Daniel Drake <dsd@laptop.org> Cc: dilinger@queued.net Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-08x86, earlyprintk: Add hsu early console for Intel Medfield platformFeng Tang
Intel Medfield platform has a high speed UART device, which could act as a early console. To enable early printk of HSU console, simply add "earlyprintk=hsu" in kernel command line. Currently we put the code in the early_printk_mrst.c as it is also for Intel MID platforms like the mrst early console Signed-off-by: Feng Tang <feng.tang@intel.com> Acked-by: Alan Cox <alan@linux.intel.com> Cc: greg@kroah.com LKML-Reference: <1284361736-23011-5-git-send-email-feng.tang@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-08x86, earlyprintk: Add earlyprintk for Intel Moorestown platformFeng Tang
Intel Moorestown platform has a spi-uart device(Maxim3110), which connects to a Designware spi core controller. This patch will add early console function based on it. As it will be used long before Linux spi subsystem get initialised, we simply directly manipulate the spi controller's register to acheive the early console func. This is safe as it will be disabled when devices subsytem get initialised. To use it, user need enable CONFIG_X86_MRST_EARLY_PRINTK in kenrel config and add "earlyprintk=mrst" in kernel command line. Signed-off-by: Feng Tang <feng.tang@intel.com> Acked-by: Alan Cox <alan@linux.intel.com> Cc: greg@kroah.com LKML-Reference: <1284361736-23011-4-git-send-email-feng.tang@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-08x86: Add two helper macros for fixed address mappingFeng Tang
Sometimes fixmap will be used to map an physical address which is not PAGE align, so to use it we need first map it and then add the address offset to the mapped fixed address. These 2 new helpers are suggested by Ingo Molnar to make the process simpler. For a physicall address like "phys", a directly usable virtual address can be get by virt = (void *)set_fixmap_offset(fixed_idx, phys); or virt = (void *)set_fixmap_offset_nocache(fixed_idx, phys); (depends on whether the physical address is cachable or not). Signed-off-by: Feng Tang <feng.tang@intel.com> Cc: alan@linux.intel.com Cc: greg@kroah.com Cc: x86@kernel.org LKML-Reference: <1284361736-23011-3-git-send-email-feng.tang@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-08x86: HWPOISON: Report correct address granuality for huge hwpoison faultsAndi Kleen
An earlier patch fixed the hwpoison fault handling to encode the huge page size in the fault code of the page fault handler. This is needed to report this information in SIGBUS to user space. This is a straight forward patch to pass this information through to the signal handling in the x86 specific fault.c Cc: x86@kernel.org Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: fengguang.wu@intel.com Signed-off-by: Andi Kleen <ak@linux.intel.com>
2010-10-08Merge commit 'v2.6.36-rc7' into core/memblockIngo Molnar
Merge reason: Update from -rc3 to -rc7. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-07x86, setup: Use string copy operation to optimze copy in kernel compressionZhao Yakui
The kernel decompression code parses the ELF header and then copies the segment to the corresponding destination. Currently it uses slow byte-copy code. This patch makes it use the string copy operations instead. In the test the copy performance can be improved very significantly after using the string copy operation mechanism. 1. The copy time can be reduced from 150ms to 20ms on one Atom machine 2. The copy time can be reduced about 80% on another machine The time is reduced from 7ms to 1.5ms when using 32-bit kernel. The time is reduced from 10ms to 2ms when using 64-bit kernel. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> LKML-Reference: <1286502453-7043-1-git-send-email-yakui.zhao@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-10-07x86, mrst: A function in a header file needs to be marked "inline"H. Peter Anvin
A function in a header file needs to be explicitly marked "inline", or gcc will complain if it is not used. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: <stable@kernel.org> v2.6.36 LKML-Reference: <1274295685-6774-3-git-send-email-jacob.jun.pan@linux.intel.com>
2010-10-07x86-32: Fix sparse warning for the __PHYSICAL_MASK calculationNamhyung Kim
On 32-bit non-PAE system, cast to 'phys_addr_t' truncates value before subtraction. Subtracting before cast produce same result but remove following warnings from sparse: arch/x86/include/asm/pgtable_types.h:255:38: warning: cast truncates bits from constant value (100000000 becomes 0) arch/x86/include/asm/pgtable_types.h:270:38: warning: cast truncates bits from constant value (100000000 becomes 0) arch/x86/include/asm/pgtable.h:127:32: warning: cast truncates bits from constant value (100000000 becomes 0) arch/x86/include/asm/pgtable.h:132:32: warning: cast truncates bits from constant value (100000000 becomes 0) arch/x86/include/asm/pgtable.h:344:31: warning: cast truncates bits from constant value (100000000 becomes 0) 64-bit or PAE machines will not be affected by this change. Signed-off-by: Namhyung Kim <namhyung@gmail.com> LKML-Reference: <1285770588-14065-1-git-send-email-namhyung@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-10-07Fix IRQ flag handling namingDavid Howells
Fix the IRQ flag handling naming. In linux/irqflags.h under one configuration, it maps: local_irq_enable() -> raw_local_irq_enable() local_irq_disable() -> raw_local_irq_disable() local_irq_save() -> raw_local_irq_save() ... and under the other configuration, it maps: raw_local_irq_enable() -> local_irq_enable() raw_local_irq_disable() -> local_irq_disable() raw_local_irq_save() -> local_irq_save() ... This is quite confusing. There should be one set of names expected of the arch, and this should be wrapped to give another set of names that are expected by users of this facility. Change this to have the arch provide: flags = arch_local_save_flags() flags = arch_local_irq_save() arch_local_irq_restore(flags) arch_local_irq_disable() arch_local_irq_enable() arch_irqs_disabled_flags(flags) arch_irqs_disabled() arch_safe_halt() Then linux/irqflags.h wraps these to provide: raw_local_save_flags(flags) raw_local_irq_save(flags) raw_local_irq_restore(flags) raw_local_irq_disable() raw_local_irq_enable() raw_irqs_disabled_flags(flags) raw_irqs_disabled() raw_safe_halt() with type checking on the flags 'arguments', and then wraps those to provide: local_save_flags(flags) local_irq_save(flags) local_irq_restore(flags) local_irq_disable() local_irq_enable() irqs_disabled_flags(flags) irqs_disabled() safe_halt() with tracing included if enabled. The arch functions can now all be inline functions rather than some of them having to be macros. Signed-off-by: David Howells <dhowells@redhat.com> [X86, FRV, MN10300] Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [Tile] Signed-off-by: Michal Simek <monstr@monstr.eu> [Microblaze] Tested-by: Catalin Marinas <catalin.marinas@arm.com> [ARM] Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [AVR] Acked-by: Tony Luck <tony.luck@intel.com> [IA-64] Acked-by: Hirokazu Takata <takata@linux-m32r.org> [M32R] Acked-by: Greg Ungerer <gerg@uclinux.org> [M68K/M68KNOMMU] Acked-by: Ralf Baechle <ralf@linux-mips.org> [MIPS] Acked-by: Kyle McMartin <kyle@mcmartin.ca> [PA-RISC] Acked-by: Paul Mackerras <paulus@samba.org> [PowerPC] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [S390] Acked-by: Chen Liqin <liqin.chen@sunplusct.com> [Score] Acked-by: Matt Fleming <matt@console-pimps.org> [SH] Acked-by: David S. Miller <davem@davemloft.net> [Sparc] Acked-by: Chris Zankel <chris@zankel.net> [Xtensa] Reviewed-by: Richard Henderson <rth@twiddle.net> [Alpha] Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> [H8300] Cc: starvik@axis.com [CRIS] Cc: jesper.nilsson@axis.com [CRIS] Cc: linux-cris-kernel@axis.com
2010-10-06Merge branch 'v2.6.36-rc6-urgent-fixes' of ↵Linus Torvalds
git://xenbits.xen.org/people/sstabellini/linux-pvhvm * 'v2.6.36-rc6-urgent-fixes' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm: xen: do not initialize PV timers on HVM if !xen_have_vector_callback xen: do not set xenstored_ready before xenbus_probe on hvm
2010-10-05x86, mm: Add RESERVE_BRK_ARRAY() helperJeremy Fitzhardinge
This is useful when converting static arrays into boot-time brk allocated objects. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> LKML-Reference: <4C805EEA.1080205@goop.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-10-05x86, memblock: Remove __memblock_x86_find_in_range_size()Yinghai Lu
Fold it into memblock_x86_find_in_range(), and change bad_addr_size() to check_reserve_memblock(). So whole memblock_x86_find_in_range_size() code is more readable. Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <4CAA4DEC.4000401@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-10-05x86-32, memblock: Make add_highpages honor early reserved rangesYinghai Lu
Originally the only early reserved range that is overlapped with high pages is "KVA RAM", but we already do remove that from the active ranges. However, It turns out Xen could have that kind of overlapping to support memory ballooning.x So we need to make add_highpage_with_active_regions() to subtract memblock reserved just like low ram; this is the proper design anyway. In this patch, refactering get_freel_all_memory_range() to make it can be used by add_highpage_with_active_regions(). Also we don't need to remove "KVA RAM" from active ranges. Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <4CABB183.1040607@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-10-05x86, memblock: Fix crashkernel allocationYinghai Lu
Cai Qian found crashkernel is broken with the x86 memblock changes. 1. crashkernel=128M@32M always reported that range is used, even if the first kernel is small and does not usethat range 2. we always got following report when using "kexec -p" Could not find a free area of memory of a000 bytes... locate_hole failed The root cause is that generic memblock_find_in_range() will try to allocate from the top of the range, whereas the kexec code was written assuming that allocation was always near the bottom and that it could blindly extend memory upward. Unfortunately the kexec code doesn't have a system for requesting the range that it really needs, so this is subject to probabilistic failures. This patch hacks around the problem by limiting the target range heuristically to below the traditional bzImage max range. This number is arbitrary and not always correct, and a much better result would be obtained by having kexec communicate this number based on the kernel header information and any appropriate command line options. Reported-and-Bisected-by: CAI Qian <caiqian@redhat.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <4CABAF2A.5090501@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-10-05Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf trace scripting: Fix extern struct definitions perf ui hist browser: Fix segfault on 'a' for annotate perf tools: Fix build breakage perf, x86: Handle in flight NMIs on P4 platform oprofile, ARM: Release resources on failure oprofile: Add Support for Intel CPU Family 6 / Model 29
2010-10-05modules: Fix module_bug_list list corruption raceLinus Torvalds
With all the recent module loading cleanups, we've minimized the code that sits under module_mutex, fixing various deadlocks and making it possible to do most of the module loading in parallel. However, that whole conversion totally missed the rather obscure code that adds a new module to the list for BUG() handling. That code was doubly obscure because (a) the code itself lives in lib/bugs.c (for dubious reasons) and (b) it gets called from the architecture-specific "module_finalize()" rather than from generic code. Calling it from arch-specific code makes no sense what-so-ever to begin with, and is now actively wrong since that code isn't protected by the module loading lock any more. So this commit moves the "module_bug_{finalize,cleanup}()" calls away from the arch-specific code, and into the generic code - and in the process protects it with the module_mutex so that the list operations are now safe. Future fixups: - move the module list handling code into kernel/module.c where it belongs. - get rid of 'module_bug_list' and just use the regular list of modules (called 'modules' - imagine that) that we already create and maintain for other reasons. Reported-and-tested-by: Thomas Gleixner <tglx@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Adrian Bunk <bunk@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-05xen: do not initialize PV timers on HVM if !xen_have_vector_callbackStefano Stabellini
if !xen_have_vector_callback do not initialize PV timer unconditionally because we still don't know how many cpus are available and if there is more than one we won't be able to receive the timer interrupts on cpu > 0. This patch fixes an hang at boot when Xen does not support vector callbacks and the guest has multiple vcpus. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
2010-10-05perf, gcc-4.6: Fix set but unused variableAndi Kleen
Just dead code I believe. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: andi@firstfloor.org Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-05Merge branch 'perf/urgent' into perf/coreIngo Molnar
Conflicts: tools/perf/util/ui/browsers/hists.c Merge reason: fix the conflict and merge in changes for dependent patch. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-04x86, cpu: Fix X86_FEATURE_NOPLBorislav Petkov
ba0593bf553c450a03dbc5f8c1f0ff58b778a0c8 cleared the aforementioned cpuid bit only on 32-bit due to various problems with Virtual PC. This somehow got lost during the 32- + 64-bit merge so restore the feature bit on 64-bit. For that, set it explicitly for non-constant arguments of cpu_has(). Update comment for future reference. Signed-off-by: Borislav Petkov <bp@alien8.de> LKML-Reference: <20101004073127.GA20305@liondog.tnic> Cc: Ryan O'Neill <ryan@innosecc.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-10-04Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Fix memory leaks in pcc_cpufreq_do_osc [CPUFREQ] acpi-cpufreq: add missing __percpu markup
2010-10-04x86: Use genirq KconfigThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20100927121843.314600915@linutronix.de> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-01x86, amd_nb: Enable GART support for AMD family 0x15 CPUsAndreas Herrmann
AMD CPU family 0x15 still supports GART for compatibility reasons. Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> LKML-Reference: <20100930124316.GG20545@loge.amd.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-10-01x86, amd: Use compute unit information to determine thread siblingsAndreas Herrmann
This information is vital for different load balancing policies. Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> LKML-Reference: <20100930124156.GF20545@loge.amd.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-10-01x86, amd: Extract compute unit information for AMD CPUsAndreas Herrmann
Get compute unit information from CPUID Fn8000_001E_EBX. (See AMD CPUID Specification - publication # 25481, revision 2.34, September 2010.) Note that each core on a compute unit still has a core_id of its own. Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> LKML-Reference: <20100930123857.GE20545@loge.amd.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-10-01x86, amd: Add support for CPUID topology extension of AMD CPUsAndreas Herrmann
Node information (ID, number of internal nodes) is provided via CPUID Fn8000_001e_ECX. See AMD CPUID Specification (Publication # 25481, Revision 2.34, September 2010). Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> LKML-Reference: <20100930123628.GD20545@loge.amd.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-10-01x86, nmi: Support NMI watchdog on newer AMD CPU familiesAndreas Herrmann
CPU families 0x12, 0x14 and 0x15 support this functionality. Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> LKML-Reference: <20100930123357.GC20545@loge.amd.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-10-01x86, mtrr: Assume SYS_CFG[Tom2ForceMemTypeWB] exists on all future AMD CPUsAndreas Herrmann
Instead of adapting the CPU family check in amd_special_default_mtrr() for each new CPU family assume that all new AMD CPUs support the necessary bits in SYS_CFG MSR. Tom2Enabled is architectural (defined in APM Vol.2). Tom2ForceMemTypeWB is defined in all BKDGs starting with K8 NPT. In pre K8-NPT BKDG this bit is reserved (read as zero). W/o this adaption Linux would unnecessarily complain about bad MTRR settings on every new AMD CPU family, e.g. [ 0.000000] WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 4863MB of RAM. Cc: stable@kernel.org # .32.x, .35.x Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> LKML-Reference: <20100930123235.GB20545@loge.amd.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-10-01Merge remote branch 'origin/x86/cpu' into x86/amd-nbH. Peter Anvin
2010-10-01Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, hpet: Fix bogus error check in hpet_assign_irq() x86, irq: Plug memory leak in sparse irq x86, cpu: After uncapping CPUID, re-run CPU feature detection
2010-10-01oprofile, x86: Simplify init/exit functionsRobert Richter
Now, that we only call the exit function if init succeeds with commit: 979048e oprofile: don't call arch exit code from init code on failure we can simplify the x86 init/exit functions too. Variable using_nmi becomes obsolete. Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-01oprofile, x86: Adding backtrace dump for 32bit process in compat modeJiri Olsa
This patch implements the oprofile backtrace generation for 32 bit applications running in the 64bit environment (compat mode). With this change it's possible to get backtrace for 32bits applications under the 64bits environment using oprofile's callgraph options. opcontrol --setup -c ... opreport -l -cg ... Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-01oprofile, x86: Using struct stack_frame for 64bit processes dumpJiri Olsa
Removing unnecessary struct frame_head and replacing it with struct stack_frame. The struct stack_frame is already defined and used in other places in kernel, so there's no reason to define new structure. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-09-30x86, hpet: Fix bogus error check in hpet_assign_irq()Thomas Gleixner
create_irq() returns -1 if the interrupt allocation failed, but the code checks for irq == 0. Use create_irq_nr() instead. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Venkatesh Pallipadi <venki@google.com> LKML-Reference: <alpine.LFD.2.00.1009282310360.2416@localhost6.localdomain6> Cc: stable@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-09-30x86, irq: Plug memory leak in sparse irqThomas Gleixner
free_irq_cfg() is not freeing the cpumask_vars in irq_cfg. Fixing this triggers a use after free caused by the fact that copying struct irq_cfg is done with memcpy, which copies the pointer not the cpumask. Fix both places. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Yinghai Lu <yhlu.kernel@gmail.com> LKML-Reference: <alpine.LFD.2.00.1009282052570.2416@localhost6.localdomain6> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-09-30[CPUFREQ] Fix memory leaks in pcc_cpufreq_do_oscPekka Enberg
If acpi_evaluate_object() function call doesn't fail, we must kfree() output.buffer before returning from pcc_cpufreq_do_osc(). Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Dave Jones <davej@redhat.com>
2010-09-30[CPUFREQ] acpi-cpufreq: add missing __percpu markupNamhyung Kim
acpi_perf_data is a percpu pointer but was missing __percpu markup. Add it. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Dave Jones <davej@redhat.com>
2010-09-30perf, x86: Handle in flight NMIs on P4 platformCyrill Gorcunov
Stephane reported we've forgot to guard the P4 platform against spurious in-flight performance IRQs. Fix it. This fixes potential spurious 'dazed and confused' NMI messages. Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: fweisbec@gmail.com Cc: peterz@infradead.org Cc: Robert Richter <robert.richter@amd.com> Cc: Lin Ming <ming.m.lin@intel.com> LKML-Reference: <1285815698-4298-1-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-30x86, UV: Use allocated buffer in tlb_uv.c:tunables_read()Dan Carpenter
The original code didn't check that the value returned from snprintf() was less than the size of the buffer. Although it didn't cause a runtime bug in this case, it makes the static checkers complain. Andrew Morton suggested a dynamically sized buffer would be cleaner. Suggested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Carpenter <error27@gmail.com> Cc: Cliff Wickman <cpw@sgi.com> Cc: Jack Steiner <steiner@sgi.com> Cc: Robin Holt <holt@sgi.com> LKML-Reference: <20100929083118.GA6376@bicker> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-28ACPI: add missing __percpu markup in arch/x86/kernel/acpi/cstate.cNamhyung Kim
cpu_cstate_entry is a percpu pointer but was missing __percpu markup. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-28x86, cpu: After uncapping CPUID, re-run CPU feature detectionH. Peter Anvin
After uncapping the CPUID level, we need to also re-run the CPU feature detection code. This resolves kernel bugzilla 16322. Reported-by: boris64 <bugzilla.kernel.org@boris64.net> Cc: <stable@kernel.org> v2.6.29..2.6.35 LKML-Reference: <tip-@git.kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-09-23 12:58:30 +0000