| Age | Commit message (Collapse) | Author |
|---|
|
Sami reported that run_on_irqstack_cond() requires the caller to cast
functions to mismatching types, which trips indirect call Control-Flow
Integrity (CFI) in Clang.
Instead of disabling CFI on that function, provide proper helpers for
the three call variants. The actual ASM code stays the same as that is
out of reach.
[ bp: Fix __run_on_irqstack() prototype to match. ]
Fixes: 931b94145981 ("x86/entry: Provide helpers for executing on the irqstack")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Cc: <stable@vger.kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/1052
Link: https://lkml.kernel.org/r/87pn6eb5tv.fsf@nanos.tec.linutronix.de
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into HEAD
|
|
FPU initialization handles them currently. However, in the case
of clearcpuid=, some other early initialization code may check for
features before the FPU initialization code is called. Handling the
argument earlier allows the command line to influence those early
initializations.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200921215638.37980-1-mh@glandium.org
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- fix fault on page table writes during instruction fetch
s390:
- doc improvement
x86:
- The obvious patches are always the ones that turn out to be
completely broken. /me hangs his head in shame"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
Revert "KVM: Check the allocation of pv cpu mask"
KVM: arm64: Remove S1PTW check from kvm_vcpu_dabt_iswrite()
KVM: arm64: Assume write fault on S1PTW permission fault on instruction fetch
docs: kvm: add documentation for KVM_CAP_S390_DIAG318
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- A defconfig fix (Daniel Díaz)
- Disable relocation relaxation for the compressed kernel when not
built as -pie as in that case kernels built with clang and linked
with LLD fail to boot due to the linker optimizing some instructions
in non-PIE form; the gory details in the commit message (Arvind
Sankar)
- A fix for the "bad bp value" warning issued by the frame-pointer
unwinder (Josh Poimboeuf)
* tag 'x86_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind/fp: Fix FP unwinding in ret_from_fork
x86/boot/compressed: Disable relocation relaxation
x86/defconfigs: Explicitly unset CONFIG_64BIT in i386_defconfig
|
|
The commit 0f990222108d ("KVM: Check the allocation of pv cpu mask") we
have in 5.9-rc5 has two issue:
1) Compilation fails for !CONFIG_SMP, see:
https://bugzilla.kernel.org/show_bug.cgi?id=209285
2) This commit completely disables PV TLB flush, see
https://lore.kernel.org/kvm/87y2lrnnyf.fsf@vitty.brq.redhat.com/
The allocation problem is likely a theoretical one, if we don't
have memory that early in boot process we're likely doomed anyway.
Let's solve it properly later.
This reverts commit 0f990222108d214a0924d920e6095b58107d7b59.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
encryption domains
In some hardware implementations, coherency between the encrypted and
unencrypted mappings of the same physical page in a VM is enforced. In
such a system, it is not required for software to flush the VM's page
from all CPU caches in the system prior to changing the value of the
C-bit for the page.
So check that bit before flushing the cache.
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lkml.kernel.org/r/20200917212038.5090-4-krish.sadhukhan@oracle.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add a new CPU ID to the RAPL power capping driver and prevent
the ACPI processor idle driver from triggering RCU-lockdep complaints.
Specifics:
- Add support for the Lakefield chip to the RAPL power capping driver
(Ricardo Neri).
- Modify the ACPI processor idle driver to prevent it from triggering
RCU-lockdep complaints which has started to happen after recent
changes in that area (Peter Zijlstra)"
* tag 'pm-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor: Take over RCU-idle for C3-BM idle
cpuidle: Allow cpuidle drivers to take over RCU-idle
ACPI: processor: Use CPUIDLE_FLAG_TLB_FLUSHED
ACPI: processor: Use CPUIDLE_FLAG_TIMER_STOP
powercap: RAPL: Add support for Lakefield
|
|
Currently the callback passed to arch_stack_walk() has an argument called
reliable passed to it to indicate if the stack entry is reliable, a comment
says that this is used by some printk() consumers. However in the current
kernel none of the arch_stack_walk() implementations ever set this flag to
true and the only callback implementation we have is in the generic
stacktrace code which ignores the flag. It therefore appears that this
flag is redundant so we can simplify and clarify things by removing it.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lore.kernel.org/r/20200914153409.25097-2-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
They do get called from the #MC handler which is already marked
"noinstr".
Commit
e2def7d49d08 ("x86/mce: Make mce_rdmsrl() panic on an inaccessible MSR")
already got rid of the instrumentation in the MSR accessors, fix the
annotation now too, in order to get rid of:
vmlinux.o: warning: objtool: do_machine_check()+0x4a: call to mce_rdmsrl() leaves .noinstr.text section
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200915194020.28807-1-bp@alien8.de
|
|
encryption domnains
In some hardware implementations, coherency between the encrypted and
unencrypted mappings of the same physical page is enforced. In such a
system, it is not required for software to flush the page from all CPU
caches in the system prior to changing the value of the C-bit for the
page. So check that bit before flushing the cache.
[ bp: Massage commit message. ]
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200917212038.5090-3-krish.sadhukhan@oracle.com
|
|
In some hardware implementations, coherency between the encrypted and
unencrypted mappings of the same physical page is enforced. In such a system,
it is not required for software to flush the page from all CPU caches in the
system prior to changing the value of the C-bit for a page. This hardware-
enforced cache coherency is indicated by EAX[10] in CPUID leaf 0x8000001f.
[ bp: Use one of the free slots in word 3. ]
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200917212038.5090-2-krish.sadhukhan@oracle.com
|
|
There have been some reports of "bad bp value" warnings printed by the
frame pointer unwinder:
WARNING: kernel stack regs at 000000005bac7112 in sh:1014 has bad 'bp' value 0000000000000000
This warning happens when unwinding from an interrupt in
ret_from_fork(). If entry code gets interrupted, the state of the
frame pointer (rbp) may be undefined, which can confuse the unwinder,
resulting in warnings like the above.
There's an in_entry_code() check which normally silences such
warnings for entry code. But in this case, ret_from_fork() is getting
interrupted. It recently got moved out of .entry.text, so the
in_entry_code() check no longer works.
It could be moved back into .entry.text, but that would break the
noinstr validation because of the call to schedule_tail().
Instead, initialize each new task's RBP to point to the task's entry
regs via an encoded frame pointer. That will allow the unwinder to
reach the end of the stack gracefully.
Fixes: b9f6976bfb94 ("x86/entry/64: Move non entry code into .text section")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/f366bbf5a8d02e2318ee312f738112d0af74d16f.1600103007.git.jpoimboe@redhat.com
|
|
This commit serves two things:
1) it optimizes BPF prologue/epilogue generation
2) it makes possible to have tailcalls within BPF subprogram
Both points are related to each other since without 1), 2) could not be
achieved.
In [1], Alexei says:
"The prologue will look like:
nop5
xor eax,eax // two new bytes if bpf_tail_call() is used in this
// function
push rbp
mov rbp, rsp
sub rsp, rounded_stack_depth
push rax // zero init tail_call counter
variable number of push rbx,r13,r14,r15
Then bpf_tail_call will pop variable number rbx,..
and final 'pop rax'
Then 'add rsp, size_of_current_stack_frame'
jmp to next function and skip over 'nop5; xor eax,eax; push rpb; mov
rbp, rsp'
This way new function will set its own stack size and will init tail
call
counter with whatever value the parent had.
If next function doesn't use bpf_tail_call it won't have 'xor eax,eax'.
Instead it would need to have 'nop2' in there."
Implement that suggestion.
Since the layout of stack is changed, tail call counter handling can not
rely anymore on popping it to rbx just like it have been handled for
constant prologue case and later overwrite of rbx with actual value of
rbx pushed to stack. Therefore, let's use one of the register (%rcx) that
is considered to be volatile/caller-saved and pop the value of tail call
counter in there in the epilogue.
Drop the BUILD_BUG_ON in emit_prologue and in
emit_bpf_tail_call_indirect where instruction layout is not constant
anymore.
Introduce new poke target, 'tailcall_bypass' to poke descriptor that is
dedicated for skipping the register pops and stack unwind that are
generated right before the actual jump to target program.
For case when the target program is not present, BPF program will skip
the pop instructions and nop5 dedicated for jmpq $target. An example of
such state when only R6 of callee saved registers is used by program:
ffffffffc0513aa1: e9 0e 00 00 00 jmpq 0xffffffffc0513ab4
ffffffffc0513aa6: 5b pop %rbx
ffffffffc0513aa7: 58 pop %rax
ffffffffc0513aa8: 48 81 c4 00 00 00 00 add $0x0,%rsp
ffffffffc0513aaf: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1)
ffffffffc0513ab4: 48 89 df mov %rbx,%rdi
When target program is inserted, the jump that was there to skip
pops/nop5 will become the nop5, so CPU will go over pops and do the
actual tailcall.
One might ask why there simply can not be pushes after the nop5?
In the following example snippet:
ffffffffc037030c: 48 89 fb mov %rdi,%rbx
(...)
ffffffffc0370332: 5b pop %rbx
ffffffffc0370333: 58 pop %rax
ffffffffc0370334: 48 81 c4 00 00 00 00 add $0x0,%rsp
ffffffffc037033b: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1)
ffffffffc0370340: 48 81 ec 00 00 00 00 sub $0x0,%rsp
ffffffffc0370347: 50 push %rax
ffffffffc0370348: 53 push %rbx
ffffffffc0370349: 48 89 df mov %rbx,%rdi
ffffffffc037034c: e8 f7 21 00 00 callq 0xffffffffc0372548
There is the bpf2bpf call (at ffffffffc037034c) right after the tailcall
and jump target is not present. ctx is in %rbx register and BPF
subprogram that we will call into on ffffffffc037034c is relying on it,
e.g. it will pick ctx from there. Such code layout is therefore broken
as we would overwrite the content of %rbx with the value that was pushed
on the prologue. That is the reason for the 'bypass' approach.
Special care needs to be taken during the install/update/remove of
tailcall target. In case when target program is not present, the CPU
must not execute the pop instructions that precede the tailcall.
To address that, the following states can be defined:
A nop, unwind, nop
B nop, unwind, tail
C skip, unwind, nop
D skip, unwind, tail
A is forbidden (lead to incorrectness). The state transitions between
tailcall install/update/remove will work as follows:
First install tail call f: C->D->B(f)
* poke the tailcall, after that get rid of the skip
Update tail call f to f': B(f)->B(f')
* poke the tailcall (poke->tailcall_target) and do NOT touch the
poke->tailcall_bypass
Remove tail call: B(f')->C(f')
* poke->tailcall_bypass is poked back to jump, then we wait the RCU
grace period so that other programs will finish its execution and
after that we are safe to remove the poke->tailcall_target
Install new tail call (f''): C(f')->D(f'')->B(f'').
* same as first step
This way CPU can never be exposed to "unwind, tail" state.
Last but not least, when tailcalls get mixed with bpf2bpf calls, it
would be possible to encounter the endless loop due to clearing the
tailcall counter if for example we would use the tailcall3-like from BPF
selftests program that would be subprogram-based, meaning the tailcall
would be present within the BPF subprogram.
This test, broken down to particular steps, would do:
entry -> set tailcall counter to 0, bump it by 1, tailcall to func0
func0 -> call subprog_tail
(we are NOT skipping the first 11 bytes of prologue and this subprogram
has a tailcall, therefore we clear the counter...)
subprog -> do the same thing as entry
and then loop forever.
To address this, the idea is to go through the call chain of bpf2bpf progs
and look for a tailcall presence throughout whole chain. If we saw a single
tail call then each node in this call chain needs to be marked as a subprog
that can reach the tailcall. We would later feed the JIT with this info
and:
- set eax to 0 only when tailcall is reachable and this is the entry prog
- if tailcall is reachable but there's no tailcall in insns of currently
JITed prog then push rax anyway, so that it will be possible to
propagate further down the call chain
- finally if tailcall is reachable, then we need to precede the 'call'
insn with mov rax, [rbp - (stack_depth + 8)]
Tail call related cases from test_verifier kselftest are also working
fine. Sample BPF programs that utilize tail calls (sockex3, tracex5)
work properly as well.
[1]: https://lore.kernel.org/bpf/20200517043227.2gpq22ifoq37ogst@ast-mbp.dhcp.thefacebook.com/
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Reflect the actual purpose of poke->ip and rename it to
poke->tailcall_target so that it will not the be confused with another
poke target that will be introduced in next commit.
While at it, do the same thing with poke->ip_stable - rename it to
poke->tailcall_target_stable.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, %rax is used to store the jump target when BPF program is
emitting the retpoline instructions that are handling the indirect
tailcall.
There is a plan to use %rax for different purpose, which is storing the
tail call counter. In order to preserve this value across the tailcalls,
adjust the BPF indirect tailcalls so that the target program will reside
in %rcx and teach the retpoline instructions about new location of jump
target.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
A PASID is allocated for an "mm" the first time any thread binds to an
SVA-capable device and is freed from the "mm" when the SVA is unbound
by the last thread. It's possible for the "mm" to have different PASID
values in different binding/unbinding SVA cycles.
The mm's PASID (non-zero for valid PASID or 0 for invalid PASID) is
propagated to a per-thread PASID MSR for all threads within the mm
through IPI, context switch, or inherited. This is done to ensure that a
running thread has the right PASID in the MSR matching the mm's PASID.
[ bp: s/SVM/SVA/g; massage. ]
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/1600187413-163670-10-git-send-email-fenghua.yu@intel.com
|
|
Currently, the ENQCMD feature depends on CONFIG_IOMMU_SUPPORT. Add
X86_FEATURE_ENQCMD to the disabled features mask so that it gets
disabled when the IOMMU config option above is not enabled.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/1600187413-163670-9-git-send-email-fenghua.yu@intel.com
|
|
The IA32_PASID MSR (0xd93) contains the Process Address Space Identifier
(PASID), a 20-bit value. Bit 31 must be set to indicate the value
programmed in the MSR is valid. Hardware uses the PASID to identify a
process address space and direct responses to the right address space.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/1600187413-163670-7-git-send-email-fenghua.yu@intel.com
|
|
The ENQCMD instruction reads a PASID from the IA32_PASID MSR. The
MSR is stored in the task's supervisor XSAVE* PASID state and is
context-switched by XSAVES/XRSTORS.
[ bp: Add (in-)definite articles and massage. ]
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/1600187413-163670-6-git-send-email-fenghua.yu@intel.com
|
|
Work submission instruction comes in two flavors. ENQCMD can be called
both in ring 3 and ring 0 and always uses the contents of a PASID MSR
when shipping the command to the device. ENQCMDS allows a kernel driver
to submit commands on behalf of a user process. The driver supplies the
PASID value in ENQCMDS. There isn't any usage of ENQCMD in the kernel as
of now.
The CPU feature flag is shown as "enqcmd" in /proc/cpuinfo.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/1600187413-163670-5-git-send-email-fenghua.yu@intel.com
|
|
Fold the misaligned u64 workarounds into the main quotactl flow instead
of implementing a separate compat syscall handler.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Add a helper to check if the calling syscall needs a fixup for
non-natural 64-bit type alignment in the compat ABI. This will only
return true for i386 syscalls on x86_64.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
lift the compat_s64 and compat_u64 definitions into common code using the
COMPAT_FOR_U64_ALIGNMENT symbol for the x86 special case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The new field 'dma_range_map' in struct device is used to facilitate the
use of single or multiple offsets between mapping regions of cpu addrs and
dma addrs. It subsumes the role of "dev->dma_pfn_offset" which was only
capable of holding a single uniform offset and had no region bounds
checking.
The function of_dma_get_range() has been modified so that it takes a single
argument -- the device node -- and returns a map, NULL, or an error code.
The map is an array that holds the information regarding the DMA regions.
Each range entry contains the address offset, the cpu_start address, the
dma_start address, and the size of the region.
of_dma_configure() is the typical manner to set range offsets but there are
a number of ad hoc assignments to "dev->dma_pfn_offset" in the kernel
driver code. These cases now invoke the function
dma_direct_set_offset(dev, cpu_addr, dma_addr, size).
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
[hch: various interface cleanups]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
|
|
Make acpi_processor_idle() use the generic TLB flushing code.
This again removes RCU usage after rcu_idle_enter().
(XXX make every C3 invalidate TLBs, not just C3-BM)
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Because of system-specific EFI firmware limitations, EFI volatile
variables may not be capable of holding the required contents of
the Machine Owner Key (MOK) certificate store when the certificate
list grows above some size. Therefore, an EFI boot loader may pass
the MOK certs via a EFI configuration table created specifically for
this purpose to avoid this firmware limitation.
An EFI configuration table is a much more primitive mechanism
compared to EFI variables and is well suited for one-way passage
of static information from a pre-OS environment to the kernel.
This patch adds initial kernel support to recognize, parse,
and validate the EFI MOK configuration table, where named
entries contain the same data that would otherwise be provided
in similarly named EFI variables.
Additionally, this patch creates a sysfs binary file for each
EFI MOK configuration table entry found. These files are read-only
to root and are provided for use by user space utilities such as
mokutil.
A subsequent patch will load MOK certs into the trusted platform
key ring using this infrastructure.
Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com>
Link: https://lore.kernel.org/r/20200905013107.10457-2-lszubowi@redhat.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Nothing except XEN uses the setup/teardown ops. Hide them there.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200826112334.198633344@linutronix.de
|
|
Get rid of all the gunk and remove the 'select PCI_MSI_ARCH_FALLBACK' from
the x86 Kconfig so the weak functions in the PCI core are replaced by stubs
which emit a warning, which ensures that any fail to set the irq domain
pointer results in a warning when the device is used.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200826112334.086003720@linutronix.de
|
|
The arch_.*_msi_irq[s] fallbacks are compiled in whether an architecture
requires them or not. Architectures which are fully utilizing hierarchical
irq domains should never call into that code.
It's not only architectures which depend on that by implementing one or
more of the weak functions, there is also a bunch of drivers which relies
on the weak functions which invoke msi_controller::setup_irq[s] and
msi_controller::teardown_irq.
Make the architectures and drivers which rely on them select them in Kconfig
and if not selected replace them by stub functions which emit a warning and
fail the PCI/MSI interrupt allocation.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200826112333.992429909@linutronix.de
|
|
Now that interrupt remapping sets the irqdomain pointer when a PCI device
is added it's possible to store the default irq domain in the device struct
in pcibios_add_device().
If the bus to which a device is connected has an irq domain associated then
this domain is used otherwise the default domain (PCI/MSI native or XEN
PCI/MSI) is used. Using the bus domain ensures that special MSI bus domains
like VMD work.
This makes XEN and the non-remapped native case work solely based on the
irq domain pointer in struct device for PCI/MSI and allows to remove the
arch fallback and make most of the x86_msi ops private to XEN in the next
steps.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200826112333.900423047@linutronix.de
|
|
To allow utilizing the irq domain pointer in struct device it is necessary
to make XEN/MSI irq domain compatible.
While the right solution would be to truly convert XEN to irq domains, this
is an exercise which is not possible for mere mortals with limited XENology.
Provide a plain irqdomain wrapper around XEN. While this is blatant
violation of the irqdomain design, it's the only solution for a XEN igorant
person to make progress on the issue which triggered this change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20200826112333.622352798@linutronix.de
|
|
X86 cannot store the irq domain pointer in struct device without breaking
XEN because the irq domain pointer takes precedence over arch_*_msi_irqs()
fallbacks.
To achieve this XEN MSI interrupt management needs to be wrapped into an
irq domain.
Move the x86_msi ops setup into a single function to prepare for this.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20200826112333.420224092@linutronix.de
|
|
X86 cannot store the irq domain pointer in struct device without breaking
XEN because the irq domain pointer takes precedence over arch_*_msi_irqs()
fallbacks.
XENs MSI teardown relies on default_teardown_msi_irqs() which invokes
arch_teardown_msi_irq(). default_teardown_msi_irqs() is a trivial iterator
over the msi entries associated to a device.
Implement this loop in xen_teardown_msi_irqs() to prepare for removal of
the fallbacks for X86.
This is a preparatory step to wrap XEN MSI alloc/free into a irq domain
which in turn allows to store the irq domain pointer in struct device and
to use the irq domain functions directly.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20200826112333.326841410@linutronix.de
|
|
The only user is in the same file and the name is too generic because this
function is only ever used for HVM domains.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross<jgross@suse.com>
Link: https://lore.kernel.org/r/20200826112333.234097629@linutronix.de
|
|
No point in initializing the default PCI/MSI interrupt domain early and no
point to create it when XEN PV/HVM/DOM0 are active.
Move the initialization to pci_arch_init() and convert it to init ops so
that XEN can override it as XEN has it's own PCI/MSI management. The XEN
override comes in a later step.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200826112332.859209894@linutronix.de
|
|
Adding a function call before the first #ifdef in arch_pci_init() triggers
a 'mixed declarations and code' warning if PCI_DIRECT is enabled.
Use stub functions and move the #ifdeffery to the header file where it is
not in the way.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200826112332.767707340@linutronix.de
|
|
No point to call it from both 32bit and 64bit implementations of
default_setup_apic_routing(). Move it to the caller.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200826112332.658496557@linutronix.de
|
|
pci_msi_get_hwirq() and pci_msi_set_desc are not longer special. Enable the
generic MSI domain ops in the core and PCI MSI code unconditionally and get
rid of the x86 specific implementations in the X86 MSI code and in the
hyperv PCI driver.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200826112332.564274859@linutronix.de
|
|
Convert the interrupt remap drivers to retrieve the pci device from the msi
descriptor and use info::hwirq.
This is the first step to prepare x86 for using the generic MSI domain ops.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200826112332.466405395@linutronix.de
|
|
Retrieve the PCI device from the msi descriptor instead of doing so at the
call sites.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200826112332.352583299@linutronix.de
|
|
Move the UV specific fields into their own struct for readability sake. Get
rid of the #ifdeffery as it does not matter at all whether the alloc info
is a couple of bytes longer or not.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200826112332.255792469@linutronix.de
|
|
None of the DMAR specific fields are required.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200826112332.163462706@linutronix.de
|
|
Move the IOAPIC specific fields into their own struct and reuse the common
devid. Get rid of the #ifdeffery as it does not matter at all whether the
alloc info is a couple of bytes longer or not.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200826112332.054367732@linutronix.de
|
|
None of the magic HPET fields are required in any way.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200826112331.943993771@linutronix.de
|
|
struct irq_alloc_info is a horrible zoo of unnamed structs in a union. Many
of the struct fields can be generic and don't have to be type specific like
hpet_id, ioapic_id...
Provide a generic set of members to prepare for the consolidation. The goal
is to make irq_alloc_info have the same basic member as the generic
msi_alloc_info so generic MSI domain ops can be reused and yet more mess
can be avoided when (non-PCI) device MSI support comes along.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200826112331.849577844@linutronix.de
|
|
Now that the iommu implementations handle the X86_*_GET_PARENT_DOMAIN
types, consolidate the two getter functions.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200826112331.741909337@linutronix.de
|
|
irq_remapping_ir_irq_domain() is used to retrieve the remapping parent
domain for an allocation type. irq_remapping_irq_domain() is for retrieving
the actual device domain for allocating interrupts for a device.
The two functions are similar and can be unified by using explicit modes
for parent irq domain retrieval.
Add X86_IRQ_ALLOC_TYPE_IOAPIC/HPET_GET_PARENT and use it in the iommu
implementations. Drop the parent domain retrieval for PCI_MSI/X as that is
unused.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200826112331.436350257@linutronix.de
|
|
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200826112331.343103175@linutronix.de
|
|
Setting the irq_set_vcpu_affinity() callback to
irq_chip_set_vcpu_affinity_parent() is a pointless exercise because the
function which utilizes it searchs the domain hierarchy to find a parent
domain which has such a callback.
Remove the useless indirection.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200826112331.250130127@linutronix.de
|
