| Age | Commit message (Collapse) | Author |
|---|
|
Fix some typos in the comments. Also fix coding style.
[Sean Christopherson rewrites the comment of write_fault_to_shadow_pgtable
field in struct kvm_vcpu_arch.]
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Wrap calls to ->page_fault() with a small shim to directly invoke the
TDP fault handler when the kernel is using retpolines and TDP is being
used. Single out the TDP fault handler and annotate the TDP path as
likely to coerce the compiler into preferring it over the indirect
function call.
Rename tdp_page_fault() to kvm_tdp_page_fault(), as it's exposed outside
of mmu.c to allow inlining the shim.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
kvm_make_request() provides smp_wmb() so pending_events changes are
guaranteed to be visible.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The KVM_REQ_EVENT request is already made in kvm_set_rflags(). We should
not make it again.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
An XSAVES component's alignment/offset is meaningful only when the
feature is enabled. Return zero and WARN_ONCE on checking alignment of
disabled features.
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20200109211452.27369-4-yu-cheng.yu@intel.com
|
|
In setup_xstate_comp(), each XSAVES component offset starts from the
end of its preceding component plus alignment. A disabled feature does
not take space and its offset should be set to the end of its preceding
one with no alignment. However, in this case, alignment is incorrectly
added to the offset, which can cause the next component to have a wrong
offset.
This problem has not been visible because currently there is no xfeature
requiring alignment.
Fix it by tracking the next starting offset only from enabled
xfeatures. To make it clear, also change the function name to
setup_xstate_comp_offsets().
[ bp: Fix a typo in the comment above it, while at it. ]
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20200109211452.27369-3-yu-cheng.yu@intel.com
|
|
KVM allows the deferral of exception payloads when a vCPU is in guest
mode to allow the L1 hypervisor to intercept certain events (#PF, #DB)
before register state has been modified. However, this behavior is
incompatible with the KVM_{GET,SET}_VCPU_EVENTS ABI, as userspace
expects register state to have been immediately modified. Userspace may
opt-in for the payload deferral behavior with the
KVM_CAP_EXCEPTION_PAYLOAD per-VM capability. As such,
kvm_multiple_exception() will immediately manipulate guest registers if
the capability hasn't been requested.
Since the deferral is only necessary if a userspace ioctl were to be
serviced at the same as a payload bearing exception is recognized, this
behavior can be relaxed. Instead, opportunistically defer the payload
from kvm_multiple_exception() and deliver the payload before completing
a KVM_GET_VCPU_EVENTS ioctl.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
SDM 27.3.4 states that the 'pending debug exceptions' VMCS field will
be populated if a VM-exit caused by an INIT signal takes priority over a
debug-trap. Emulate this behavior when synthesizing an INIT signal
VM-exit into L1.
Fixes: 4b9852f4f389 ("KVM: x86: Fix INIT signal handling in various CPU states")
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM defines the #DB payload as compatible with the 'pending debug
exceptions' field under VMX, not DR6. Mask off bit 12 when applying the
payload to DR6, as it is reserved on DR6 but not the 'pending debug
exceptions' field.
Fixes: f10c729ff965 ("kvm: vmx: Defer setting of DR6 until #DB delivery")
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
z_output_len is the size of the decompressed payload (i.e. vmlinux +
vmlinux.relocs) and is generated as an unsigned 32-bit quantity by
mkpiggy.c.
The current
movq $z_output_len, %r9
instruction generates a sign-extended move to %r9. Using
movl $z_output_len, %r9d
will instead zero-extend into %r9, which is appropriate for an unsigned
32-bit quantity. This is also what is already done for z_input_len, the
size of the compressed payload.
[ bp:
Also, z_output_len cannot be a 64-bit quantity because it participates
in:
init_size: .long INIT_SIZE # kernel initialization size
through INIT_SIZE which is a 32-bit quantity determined by the .long
directive (vs .quad for 64-bit). Furthermore, if it really must be a
64-bit quantity, then the insn must be MOVABS which can accommodate a
64-bit immediate and which the toolchain does not generate automatically.
]
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200211173333.1722739-1-nivedita@alum.mit.edu
|
|
It's shorter, and it's what is used in every other place, so make it
consistent.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200107194436.2166846-2-nivedita@alum.mit.edu
|
|
Do not initialize the microcode version at RESET or INIT, only on vCPU
creation. Microcode updates are not lost during INIT, and exact
behavior across a warm RESET is not specified by the architecture.
Since we do not support a microcode update directly from the hypervisor,
but only as a result of userspace setting the microcode version MSR,
it's simpler for userspace if we do nothing in KVM and let userspace
emulate behavior for RESET as it sees fit.
Userspace can tie the fix to the availability of MSR_IA32_UCODE_REV in
the list of emulated MSRs.
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The IMA arch code attempts to inspect the "SetupMode" EFI variable
by populating a variable called efi_SetupMode_name with the string
"SecureBoot" and passing that to the EFI GetVariable service, which
obviously does not yield the expected result.
Given that the string is only referenced a single time, let's get
rid of the intermediate variable, and pass the correct string as
an immediate argument. While at it, do the same for "SecureBoot".
Fixes: 399574c64eaf ("x86/ima: retry detecting secure boot mode")
Fixes: 980ef4d22a95 ("x86/ima: check EFI SetupMode too")
Cc: Matthew Garrett <mjg59@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: stable@vger.kernel.org # v5.3
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
The function setup_xstate_features() uses CPUID to find each xfeature's
standard-format offset and size. Since XSAVES always uses the compacted
format, supervisor xstates are *NEVER* in the standard-format and their
offsets are left as -1's. However, they are still being tracked as
last_good_offset.
Fix it by tracking only user xstate offsets.
[ bp: Use xfeature_is_supervisor() and save an indentation level. Drop
now unused xfeature_is_user(). ]
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20200109211452.27369-2-yu-cheng.yu@intel.com
|
|
For MSR type of uncore units, there is no difference between Ice Lake
and Tiger Lake. Share the same code with Ice Lake.
Tiger Lake has two MCs. Both of them are located at 0:0:0. The BAR
offset is still 0x48. The offset of the two MCs is 0x10000.
Each MC has three counters to count every read/write/total issued by the
Memory Controller to DRAM. The counters can be accessed by MMIO.
They are free-running counters.
The offset of counters are different for TIGERLAKE_L and TIGERLAKE.
Add separated mmio_init() functions.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/20200206161527.3529-1-kan.liang@linux.intel.com
|
|
For Intel LBR, the LBR Top-of-Stack (TOS) information is the HW index of
raw branch record for the most recent branch.
For non-adaptive PEBS and non-PEBS, the TOS information can be directly
retrieved from TOS MSR read in intel_pmu_lbr_read().
For adaptive PEBS, the LBR information stored in PEBS record doesn't
include the TOS information. For single PEBS, TOS can be directly read
from MSR, because the PMI is triggered immediately after PEBS is
written. TOS MSR is still unchanged.
For large PEBS, TOS MSR has stale value. Set -1ULL to indicate that the
TOS information is not available.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200127165355.27495-3-kan.liang@linux.intel.com
|
|
The low level index is the index in the underlying hardware buffer of
the most recently captured taken branch which is always saved in
branch_entries[0]. It is very useful for reconstructing the call stack.
For example, in Intel LBR call stack mode, the depth of reconstructed
LBR call stack limits to the number of LBR registers. With the low level
index information, perf tool may stitch the stacks of two samples. The
reconstructed LBR call stack can break the HW limitation.
Add a new branch sample type to retrieve low level index of raw branch
records. The low level index is between -1 (unknown) and max depth which
can be retrieved in /sys/devices/cpu/caps/branches.
Only when the new branch sample type is set, the low level index
information is dumped into the PERF_SAMPLE_BRANCH_STACK output.
Perf tool should check the attr.branch_sample_type, and apply the
corresponding format for PERF_SAMPLE_BRANCH_STACK samples.
Otherwise, some user case may be broken. For example, users may parse a
perf.data, which include the new branch sample type, with an old version
perf tool (without the check). Users probably get incorrect information
without any warning.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200127165355.27495-2-kan.liang@linux.intel.com
|
|
The perf PMI handler, intel_pmu_handle_irq(), currently does
unnecessary MSR accesses for PEBS_ENABLE MSR in
__intel_pmu_enable/disable_all() when PEBS is enabled.
When entering the handler, global ctrl is explicitly disabled. All
counters do not count anymore. It doesn't matter if PEBS is enabled
or not in a PMI handler.
Furthermore, for most cases, the cpuc->pebs_enabled is not changed in
PMI. The PEBS status doesn't change. The PEBS_ENABLE MSR doesn't need to
be changed either when exiting the handler.
PMI throttle may change the PEBS status during PMI handler. The
x86_pmu_stop() ends up in intel_pmu_pebs_disable() which can update
cpuc->pebs_enabled. But the MSR_IA32_PEBS_ENABLE is not updated
at the same time. Because the cpuc->enabled has been forced to 0.
The patch explicitly update the MSR_IA32_PEBS_ENABLE for this case.
Use ftrace to measure the duration of intel_pmu_handle_irq() on BDX.
#perf record -e cycles:P -- ./tchain_edit
The average duration of intel_pmu_handle_irq():
Without the patch 1.144 us
With the patch 1.025 us
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200121181338.3234-1-kan.liang@linux.intel.com
|
|
Perf doesn't take the left period into account when auto-reload is
enabled with fixed period sampling mode in context switch.
Here is the MSR trace of the perf command as below.
(The MSR trace is simplified from a ftrace log.)
#perf record -e cycles:p -c 2000000 -- ./triad_loop
//The MSR trace of task schedule out
//perf disable all counters, disable PEBS, disable GP counter 0,
//read GP counter 0, and re-enable all counters.
//The counter 0 stops at 0xfffffff82840
write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0
write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 0
write_msr: MSR_P6_EVNTSEL0(186), value 40003003c
rdpmc: 0, value fffffff82840
write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff
//The MSR trace of the same task schedule in again
//perf disable all counters, enable and set GP counter 0,
//enable PEBS, and re-enable all counters.
//0xffffffe17b80 (-2000000) is written to GP counter 0.
write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0
write_msr: MSR_IA32_PMC0(4c1), value ffffffe17b80
write_msr: MSR_P6_EVNTSEL0(186), value 40043003c
write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 1
write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff
When the same task schedule in again, the counter should starts from
previous left. However, it starts from the fixed period -2000000 again.
A special variant of intel_pmu_save_and_restart() is used for
auto-reload, which doesn't update the hwc->period_left.
When the monitored task schedules in again, perf doesn't know the left
period. The fixed period is used, which is inaccurate.
With auto-reload, the counter always has a negative counter value. So
the left period is -value. Update the period_left in
intel_pmu_save_and_restart_reload().
With the patch:
//The MSR trace of task schedule out
write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0
write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 0
write_msr: MSR_P6_EVNTSEL0(186), value 40003003c
rdpmc: 0, value ffffffe25cbc
write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff
//The MSR trace of the same task schedule in again
write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0
write_msr: MSR_IA32_PMC0(4c1), value ffffffe25cbc
write_msr: MSR_P6_EVNTSEL0(186), value 40043003c
write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 1
write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff
Fixes: d31fc13fdcb2 ("perf/x86/intel: Fix event update for auto-reload")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200121190125.3389-1-kan.liang@linux.intel.com
|
|
Commit 3fe3331bb285 ("perf/x86/amd: Add event map for AMD Family 17h"),
claimed L2 misses were unsupported, due to them not being found in its
referenced documentation, whose link has now moved [1].
That old documentation listed PMCx064 unit mask bit 3 as:
"LsRdBlkC: LS Read Block C S L X Change to X Miss."
and bit 0 as:
"IcFillMiss: IC Fill Miss"
We now have new public documentation [2] with improved descriptions, that
clearly indicate what events those unit mask bits represent:
Bit 3 now clearly states:
"LsRdBlkC: Data Cache Req Miss in L2 (all types)"
and bit 0 is:
"IcFillMiss: Instruction Cache Req Miss in L2."
So we can now add support for L2 misses in perf's genericised events as
PMCx064 with both the above unit masks.
[1] The commit's original documentation reference, "Processor Programming
Reference (PPR) for AMD Family 17h Model 01h, Revision B1 Processors",
originally available here:
https://www.amd.com/system/files/TechDocs/54945_PPR_Family_17h_Models_00h-0Fh.pdf
is now available here:
https://developer.amd.com/wordpress/media/2017/11/54945_PPR_Family_17h_Models_00h-0Fh.pdf
[2] "Processor Programming Reference (PPR) for Family 17h Model 31h,
Revision B0 Processors", available here:
https://developer.amd.com/wp-content/resources/55803_0.54-PUB.pdf
Fixes: 3fe3331bb285 ("perf/x86/amd: Add event map for AMD Family 17h")
Reported-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Babu Moger <babu.moger@amd.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200121171232.28839-1-kim.phillips@amd.com
|
|
Tremont is Intel's successor to Goldmont Plus. SMI_COUNT MSR is also
supported.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/1580236279-35492-3-git-send-email-kan.liang@linux.intel.com
|
|
Tremont is Intel's successor to Goldmont Plus. From the perspective of
Intel cstate residency counters, there is nothing changed compared with
Goldmont Plus and Goldmont.
Share glm_cstates with Goldmont Plus and Goldmont.
Update the comments for Tremont.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/1580236279-35492-2-git-send-email-kan.liang@linux.intel.com
|
|
Elkhart Lake also uses Tremont CPU. From the perspective of Intel PMU,
there is nothing changed compared with Jacobsville.
Share the perf code with Jacobsville.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/1580236279-35492-1-git-send-email-kan.liang@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix randconfig to generate a sane .config
- rename hostprogs-y / always to hostprogs / always-y, which are more
natual syntax.
- optimize scripts/kallsyms
- fix yes2modconfig and mod2yesconfig
- make multiple directory targets ('make foo/ bar/') work
* tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: make multiple directory targets work
kconfig: Invalidate all symbols after changing to y or m.
kallsyms: fix type of kallsyms_token_table[]
scripts/kallsyms: change table to store (strcut sym_entry *)
scripts/kallsyms: rename local variables in read_symbol()
kbuild: rename hostprogs-y/always to hostprogs/always-y
kbuild: fix the document to use extra-y for vmlinux.lds
kconfig: fix broken dependency in randconfig-generated .config
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for X86:
- Ensure that the PIT is set up when the local APIC is disable or
configured in legacy mode. This is caused by an ordering issue
introduced in the recent changes which skip PIT initialization when
the TSC and APIC frequencies are already known.
- Handle malformed SRAT tables during early ACPI parsing which caused
an infinite loop anda boot hang.
- Fix a long standing race in the affinity setting code which affects
PCI devices with non-maskable MSI interrupts. The problem is caused
by the non-atomic writes of the MSI address (destination APIC id)
and data (vector) fields which the device uses to construct the MSI
message. The non-atomic writes are mandated by PCI.
If both fields change and the device raises an interrupt after
writing address and before writing data, then the MSI block
constructs a inconsistent message which causes interrupts to be
lost and subsequent malfunction of the device.
The fix is to redirect the interrupt to the new vector on the
current CPU first and then switch it over to the new target CPU.
This allows to observe an eventually raised interrupt in the
transitional stage (old CPU, new vector) to be observed in the APIC
IRR and retriggered on the new target CPU and the new vector.
The potential spurious interrupts caused by this are harmless and
can in the worst case expose a buggy driver (all handlers have to
be able to deal with spurious interrupts as they can and do happen
for various reasons).
- Add the missing suspend/resume mechanism for the HYPERV hypercall
page which prevents resume hibernation on HYPERV guests. This
change got lost before the merge window.
- Mask the IOAPIC before disabling the local APIC to prevent
potentially stale IOAPIC remote IRR bits which cause stale
interrupt lines after resume"
* tag 'x86-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Mask IOAPIC entries when disabling the local APIC
x86/hyperv: Suspend/resume the hypercall page for hibernation
x86/apic/msi: Plug non-maskable MSI affinity race
x86/boot: Handle malformed SRAT tables during early ACPI parsing
x86/timer: Don't skip PIT setup when APIC is disabled or in legacy mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fix from Thomas Gleixner:
"A single fix for a EFI boot regression on X86 which was caused by the
recent rework of the EFI memory map parsing. On systems with invalid
memmap entries the cleanup function uses an value which cannot be
relied on in this stage. Use the actual EFI memmap entry instead"
* tag 'efi-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/x86: Fix boot regression on systems with invalid memmap entries
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs file system parameter updates from Al Viro:
"Saner fs_parser.c guts and data structures. The system-wide registry
of syntax types (string/enum/int32/oct32/.../etc.) is gone and so is
the horror switch() in fs_parse() that would have to grow another case
every time something got added to that system-wide registry.
New syntax types can be added by filesystems easily now, and their
namespace is that of functions - not of system-wide enum members. IOW,
they can be shared or kept private and if some turn out to be widely
useful, we can make them common library helpers, etc., without having
to do anything whatsoever to fs_parse() itself.
And we already get that kind of requests - the thing that finally
pushed me into doing that was "oh, and let's add one for timeouts -
things like 15s or 2h". If some filesystem really wants that, let them
do it. Without somebody having to play gatekeeper for the variants
blessed by direct support in fs_parse(), TYVM.
Quite a bit of boilerplate is gone. And IMO the data structures make a
lot more sense now. -200LoC, while we are at it"
* 'merge.nfs-fs_parse.1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (25 commits)
tmpfs: switch to use of invalfc()
cgroup1: switch to use of errorfc() et.al.
procfs: switch to use of invalfc()
hugetlbfs: switch to use of invalfc()
cramfs: switch to use of errofc() et.al.
gfs2: switch to use of errorfc() et.al.
fuse: switch to use errorfc() et.al.
ceph: use errorfc() and friends instead of spelling the prefix out
prefix-handling analogues of errorf() and friends
turn fs_param_is_... into functions
fs_parse: handle optional arguments sanely
fs_parse: fold fs_parameter_desc/fs_parameter_spec
fs_parser: remove fs_parameter_description name field
add prefix to fs_context->log
ceph_parse_param(), ceph_parse_mon_ips(): switch to passing fc_log
new primitive: __fs_parse()
switch rbd and libceph to p_log-based primitives
struct p_log, variants of warnf() et.al. taking that one instead
teach logfc() to handle prefices, give it saner calling conventions
get rid of cg_invalf()
...
|
|
The former contains nothing but a pointer to an array of the latter...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Unused now.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
When a system suspends, the local APIC is disabled in the suspend sequence,
but the IOAPIC is left in the current state. This means unmasked interrupt
lines stay unmasked. This is usually the case for IOAPIC pin 9 to which the
ACPI interrupt is connected.
That means that in suspended state the IOAPIC can respond to an external
interrupt, e.g. the wakeup via keyboard/RTC/ACPI, but the interrupt message
cannot be handled by the disabled local APIC. As a consequence the Remote
IRR bit is set, but the local APIC does not send an EOI to acknowledge
it. This causes the affected interrupt line to become stale and the stale
Remote IRR bit will cause a hang when __synchronize_hardirq() is invoked
for that interrupt line.
To prevent this, mask all IOAPIC entries before disabling the local
APIC. The resume code already has the unmask operation inside.
[ tglx: Massaged changelog ]
Signed-off-by: Tony W Wang-oc <TonyWWang-oc@zhaoxin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/1579076539-7267-1-git-send-email-TonyWWang-oc@zhaoxin.com
|
|
Pull more KVM updates from Paolo Bonzini:
"s390:
- fix register corruption
- ENOTSUPP/EOPNOTSUPP mixed
- reset cleanups/fixes
- selftests
x86:
- Bug fixes and cleanups
- AMD support for APIC virtualization even in combination with
in-kernel PIT or IOAPIC.
MIPS:
- Compilation fix.
Generic:
- Fix refcount overflow for zero page"
* tag 'kvm-5.6-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
KVM: vmx: delete meaningless vmx_decache_cr0_guest_bits() declaration
KVM: x86: Mark CR4.UMIP as reserved based on associated CPUID bit
x86: vmxfeatures: rename features for consistency with KVM and manual
KVM: SVM: relax conditions for allowing MSR_IA32_SPEC_CTRL accesses
KVM: x86: Fix perfctr WRMSR for running counters
x86/kvm/hyper-v: don't allow to turn on unsupported VMX controls for nested guests
x86/kvm/hyper-v: move VMX controls sanitization out of nested_enable_evmcs()
kvm: mmu: Separate generating and setting mmio ptes
kvm: mmu: Replace unsigned with unsigned int for PTE access
KVM: nVMX: Remove stale comment from nested_vmx_load_cr3()
KVM: MIPS: Fold comparecount_func() into comparecount_wakeup()
KVM: MIPS: Fix a build error due to referencing not-yet-defined function
x86/kvm: do not setup pv tlb flush when not paravirtualized
KVM: fix overflow of zero page refcount with ksm running
KVM: x86: Take a u64 when checking for a valid dr7 value
KVM: x86: use raw clock values consistently
KVM: x86: reorganize pvclock_gtod_data members
KVM: nVMX: delete meaningless nested_vmx_run() declaration
KVM: SVM: allow AVIC without split irqchip
kvm: ioapic: Lazy update IOAPIC EOI
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Define to_pci_sysdata() always to fix build breakage when !CONFIG_PCI
(Jason A. Donenfeld)
- Use PF PASID for VFs to fix VF IOMMU bind failures (Kuppuswamy
Sathyanarayanan)
* tag 'pci-v5.6-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI/ATS: Use PF PASID for VFs
x86/PCI: Define to_pci_sysdata() even when !CONFIG_PCI
|
|
The function vmx_decache_cr0_guest_bits() is only called below its
implementation. So this is meaningless and should be removed.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Re-add code to mark CR4.UMIP as reserved if UMIP is not supported by the
host. The UMIP handling was unintentionally dropped during a recent
refactoring.
Not flagging CR4.UMIP allows the guest to set its CR4.UMIP regardless of
host support or userspace desires. On CPUs with UMIP support, including
emulated UMIP, this allows the guest to enable UMIP against the wishes
of the userspace VMM. On CPUs without any form of UMIP, this results in
a failed VM-Enter due to invalid guest state.
Fixes: 345599f9a2928 ("KVM: x86: Add macro to ensure reserved cr4 bits checks stay in sync")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Three of the feature bits in vmxfeatures.h have names that are different
from the Intel SDM. The names have been adjusted recently in KVM but they
were using the old name in the tip tree's x86/cpu branch. Adjust for
consistency.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Userspace that does not know about the AMD_IBRS bit might still
allow the guest to protect itself with MSR_IA32_SPEC_CTRL using
the Intel SPEC_CTRL bit. However, svm.c disallows this and will
cause a #GP in the guest when writing to the MSR. Fix this by
loosening the test and allowing the Intel CPUID bit, and in fact
allow the AMD_STIBP bit as well since it allows writing to
MSR_IA32_SPEC_CTRL too.
Reported-by: Zhiyi Guo <zhguo@redhat.com>
Analyzed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Analyzed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Correct the logic in intel_pmu_set_msr() for fixed and general purpose
counters. This was recently changed to set pmc->counter without taking
in to account the value of pmc_read_counter() which will be incorrect if
the counter is currently running and non-zero; this changes back to the
old logic which accounted for the value of currently running counters.
Signed-off-by: Eric Hankland <ehankland@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
guests
Sane L1 hypervisors are not supposed to turn any of the unsupported VMX
controls on for its guests and nested_vmx_check_controls() checks for
that. This is, however, not the case for the controls which are supported
on the host but are missing in enlightened VMCS and when eVMCS is in use.
It would certainly be possible to add these missing checks to
nested_check_vm_execution_controls()/_vm_exit_controls()/.. but it seems
preferable to keep eVMCS-specific stuff in eVMCS and reduce the impact on
non-eVMCS guests by doing less unrelated checks. Create a separate
nested_evmcs_check_controls() for this purpose.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
With fine grained VMX feature enablement QEMU>=4.2 tries to do KVM_SET_MSRS
with default (matching CPU model) values and in case eVMCS is also enabled,
fails.
It would be possible to drop VMX feature filtering completely and make
this a guest's responsibility: if it decides to use eVMCS it should know
which fields are available and which are not. Hyper-V mostly complies to
this, however, there are some problematic controls:
SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES
VM_{ENTRY,EXIT}_LOAD_IA32_PERF_GLOBAL_CTRL
which Hyper-V enables. As there are no corresponding fields in eVMCS, we
can't handle this properly in KVM. This is a Hyper-V issue.
Move VMX controls sanitization from nested_enable_evmcs() to vmx_get_msr(),
and do the bare minimum (only clear controls which are known to cause issues).
This allows userspace to keep setting controls it wants and at the same
time hides them from the guest.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Separate the functions for generating MMIO page table entries from the
function that inserts them into the paging structure. This refactoring
will facilitate changes to the MMU sychronization model to use atomic
compare / exchanges (which are not guaranteed to succeed) instead of a
monolithic MMU lock.
No functional change expected.
Tested by running kvm-unit-tests on an Intel Haswell machine. This
commit introduced no new failures.
Signed-off-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There are several functions which pass an access permission mask for
SPTEs as an unsigned. This works, but checkpatch complains about it.
Switch the occurrences of unsigned to unsigned int to satisfy checkpatch.
No functional change expected.
Tested by running kvm-unit-tests on an Intel Haswell machine. This
commit introduced no new failures.
Signed-off-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The blurb pertaining to the return value of nested_vmx_load_cr3() no
longer matches reality, remove it entirely as the behavior it is
attempting to document is quite obvious when reading the actual code.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
kvm_setup_pv_tlb_flush will waste memory and print a misguiding message
when KVM paravirtualization is not available.
Intel SDM says that the when cpuid is used with EAX higher than the
maximum supported value for basic of extended function, the data for the
highest supported basic function will be returned.
So, in some systems, kvm_arch_para_features will return bogus data,
causing kvm_setup_pv_tlb_flush to detect support for pv tlb flush.
Testing for kvm_para_available will work as it checks for the hypervisor
signature.
Besides, when the "nopv" command line parameter is used, it should not
continue as well, as kvm_guest_init will no be called in that case.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Take a u64 instead of an unsigned long in kvm_dr7_valid() to fix a build
warning on i386 due to right-shifting a 32-bit value by 32 when checking
for bits being set in dr7[63:32].
Alternatively, the warning could be resolved by rewriting the check to
use an i386-friendly method, but taking a u64 fixes another oddity on
32-bit KVM. Beause KVM implements natural width VMCS fields as u64s to
avoid layout issues between 32-bit and 64-bit, a devious guest can stuff
vmcs12->guest_dr7 with a 64-bit value even when both the guest and host
are 32-bit kernels. KVM eventually drops vmcs12->guest_dr7[63:32] when
propagating vmcs12->guest_dr7 to vmcs02, but ideally KVM would not rely
on that behavior for correctness.
Cc: Jim Mattson <jmattson@google.com>
Cc: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Fixes: ecb697d10f70 ("KVM: nVMX: Check GUEST_DR7 on vmentry of nested guests")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit 53fafdbb8b21f ("KVM: x86: switch KVMCLOCK base to monotonic raw
clock") changed kvmclock to use tkr_raw instead of tkr_mono. However,
the default kvmclock_offset for the VM was still based on the monotonic
clock and, if the raw clock drifted enough from the monotonic clock,
this could cause a negative system_time to be written to the guest's
struct pvclock. RHEL5 does not like it and (if it boots fast enough to
observe a negative time value) it hangs.
There is another thing to be careful about: getboottime64 returns the
host boot time with tkr_mono frequency, and subtracting the tkr_raw-based
kvmclock value will cause the wallclock to be off if tkr_raw drifts
from tkr_mono. To avoid this, compute the wallclock delta from the
current time instead of being clever and using getboottime64.
Fixes: 53fafdbb8b21f ("KVM: x86: switch KVMCLOCK base to monotonic raw clock")
Cc: stable@vger.kernel.org
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We will need a copy of tk->offs_boot in the next patch. Store it and
cleanup the struct: instead of storing tk->tkr_xxx.base with the tk->offs_boot
included, store the raw value in struct pvclock_clock and sum it in
do_monotonic_raw and do_realtime. tk->tkr_xxx.xtime_nsec also moves
to struct pvclock_clock.
While at it, fix a (usually harmless) typo in do_monotonic_raw, which
was using gtod->clock.shift instead of gtod->raw_clock.shift.
Fixes: 53fafdbb8b21f ("KVM: x86: switch KVMCLOCK base to monotonic raw clock")
Cc: stable@vger.kernel.org
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The function nested_vmx_run() declaration is below its implementation. So
this is meaningless and should be removed.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
SVM is now able to disable AVIC dynamically whenever the in-kernel PIT sets
up an ack notifier, so we can enable it even if in-kernel IOAPIC/PIC/PIT
are in use.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In-kernel IOAPIC does not receive EOI with AMD SVM AVIC
since the processor accelerate write to APIC EOI register and
does not trap if the interrupt is edge-triggered.
Workaround this by lazy check for pending APIC EOI at the time when
setting new IOPIC irq, and update IOAPIC EOI if no pending APIC EOI.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Refactor code for handling IOAPIC EOI for subsequent patch.
There is no functional change.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
