| Age | Commit message (Collapse) | Author |
|---|
|
vmx_save_host_state has multiple ifdefs for CONFIG_X86_64 that have
no other code between them. Simplify by reducing them to a single
conditional.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The local variable was newly introduced but is only accessed in one
place on x86_64, but not on 32-bit:
arch/x86/kvm/vmx.c: In function 'vmx_save_host_state':
arch/x86/kvm/vmx.c:2175:6: error: unused variable 'cpu' [-Werror=unused-variable]
This puts it into another #ifdef.
Fixes: 35060ed6a1ff ("x86/kvm/vmx: avoid expensive rdmsr for MSR_GS_BASE")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Remove the WARN_ON in handle_ept_misconfig() as it is unnecessary
and causes false positives. Return the unmodified result of
kvm_mmu_page_fault() instead of converting a system error code to
KVM_EXIT_UNKNOWN so that userspace sees the error code of the
actual failure, not a generic "we don't know what went wrong".
* kvm_mmu_page_fault() will WARN if reserved bits are set in the
SPTEs, i.e. it covers the case where an EPT misconfig occurred
because of a KVM bug.
* The WARN_ON will fire on any system error code that is hit while
handling the fault, e.g. -ENOMEM from mmu_topup_memory_caches()
while handling a legitmate MMIO EPT misconfig or -EFAULT from
kvm_handle_bad_page() if the corresponding HVA is invalid. In
either case, userspace should receive the original error code
and firing a warning is incorrect behavior as KVM is operating
as designed.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The bug that led to commit 95e057e25892eaa48cad1e2d637b80d0f1a4fac5
was a benign warning (no adverse affects other than the warning
itself) that was detected by syzkaller. Further inspection shows
that the WARN_ON in question, in handle_ept_misconfig(), is
unnecessary and flawed (this was also briefly discussed in the
original patch: https://patchwork.kernel.org/patch/10204649).
* The WARN_ON is unnecessary as kvm_mmu_page_fault() will WARN
if reserved bits are set in the SPTEs, i.e. it covers the case
where an EPT misconfig occurred because of a KVM bug.
* The WARN_ON is flawed because it will fire on any system error
code that is hit while handling the fault, e.g. -ENOMEM can be
returned by mmu_topup_memory_caches() while handling a legitmate
MMIO EPT misconfig.
The original behavior of returning -EFAULT when userspace munmaps
an HVA without first removing the memslot is correct and desirable,
i.e. KVM is letting userspace know it has generated a bad address.
Returning RET_PF_EMULATE masks the WARN_ON in the EPT misconfig path,
but does not fix the underlying bug, i.e. the WARN_ON is bogus.
Furthermore, returning RET_PF_EMULATE has the unwanted side effect of
causing KVM to attempt to emulate an instruction on any page fault
with an invalid HVA translation, e.g. a not-present EPT violation
on a VM_PFNMAP VMA whose fault handler failed to insert a PFN.
* There is no guarantee that the fault is directly related to the
instruction, i.e. the fault could have been triggered by a side
effect memory access in the guest, e.g. while vectoring a #DB or
writing a tracing record. This could cause KVM to effectively
mask the fault if KVM doesn't model the behavior leading to the
fault, i.e. emulation could succeed and resume the guest.
* If emulation does fail, KVM will return EMULATION_FAILED instead
of -EFAULT, which is a red herring as the user will either debug
a bogus emulation attempt or scratch their head wondering why we
were attempting emulation in the first place.
TL;DR: revert to returning -EFAULT and remove the bogus WARN_ON in
handle_ept_misconfig in a future patch.
This reverts commit 95e057e25892eaa48cad1e2d637b80d0f1a4fac5.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This is very similar to the aligned versions movaps/movapd.
We have seen the corresponding emulation failures with openbsd as guest
and with Windows 10 with intel HD graphics pass through.
Signed-off-by: Christian Ehrhardt <christian_ehrhardt@genua.de>
Signed-off-by: Stefan Fritsch <sf@sfritsch.de>
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Exit to userspace with KVM_INTERNAL_ERROR_EMULATION if we encounter
an exception in Protected Mode while emulating guest due to invalid
guest state. Unlike Big RM, KVM doesn't support emulating exceptions
in PM, i.e. PM exceptions are always injected via the VMCS. Because
we will never do VMRESUME due to emulation_required, the exception is
never realized and we'll keep emulating the faulting instruction over
and over until we receive a signal.
Exit to userspace iff there is a pending exception, i.e. don't exit
simply on a requested event. The purpose of this check and exit is to
aid in debugging a guest that is in all likelihood already doomed.
Invalid guest state in PM is extremely limited in normal operation,
e.g. it generally only occurs for a few instructions early in BIOS,
and any exception at this time is all but guaranteed to be fatal.
Non-vectored interrupts, e.g. INIT, SIPI and SMI, can be cleanly
handled/emulated, while checking for vectored interrupts, e.g. INTR
and NMI, without hitting false positives would add a fair amount of
complexity for almost no benefit (getting hit by lightning seems
more likely than encountering this specific scenario).
Add a WARN_ON_ONCE to vmx_queue_exception() if we try to inject an
exception via the VMCS and emulation_required is true.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
We get the below warning if we try to use kexec on P9:
kexec_core: Starting new kernel
WARNING: CPU: 0 PID: 1223 at arch/powerpc/kernel/process.c:826 __set_breakpoint+0xb4/0x140
[snip]
NIP __set_breakpoint+0xb4/0x140
LR kexec_prepare_cpus_wait+0x58/0x150
Call Trace:
0xc0000000ee70fb20 (unreliable)
0xc0000000ee70fb20
default_machine_kexec+0x234/0x2c0
machine_kexec+0x84/0x90
kernel_kexec+0xd8/0xe0
SyS_reboot+0x214/0x2c0
system_call+0x58/0x6c
This happens since we are trying to clear hw breakpoint on POWER9,
though we don't have CPU_FTR_DAWR enabled. Guard __set_breakpoint()
within hw_breakpoint_disable() with ppc_breakpoint_available() to
address this.
Fixes: 9654153158d3 ("powerpc: Disable DAWR in the base POWER9 CPU features")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
arm has an optional MULTI_IRQ_HANDLER, which openrisc copied but didn't
make optional. The multi irq handler infrastructure has been copied to
generic code selectable with a new config symbol. That symbol can be
selected by randconfig builds and can cause build breakage.
Introduce CONFIG_MULTI_IRQ_HANDLER as an intermediate step which prevents
the core config symbol from being selected. The openrisc local config
symbol will be removed once openrisc gets converted to the generic code.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.kernel.org/r/20180404043130.31277-3-palmer@sifive.com
|
|
arm has an optional MULTI_IRQ_HANDLER, which arm64 copied but didn't make
optional. The multi irq handler infrastructure has been copied to generic
code selectable with a new config symbol. That symbol can be selected by
randconfig builds and can cause build breakage.
Introduce CONFIG_MULTI_IRQ_HANDLER as an intermediate step which prevents
the core config symbol from being selected. The arm64 local config symbol
will be removed once arm64 gets converted to the generic code.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.kernel.org/r/20180404043130.31277-2-palmer@sifive.com
|
|
kernel parameter disable_radix takes different options
disable_radix=yes|no|1|0 or just disable_radix.
prom_init parsing is not supporting these options.
Fixes: 1fd6c0220710 ("powerpc/mm: Add a CONFIG option to choose if radix is used by default")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
kernel parameter disable_radix takes different options
disable_radix=yes|no|1|0 or just disable_radix. When using the later
format we get below error.
`Malformed early option 'disable_radix'`
Fixes: 1fd6c0220710 ("powerpc/mm: Add a CONFIG option to choose if radix is used by default")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
With 64k page size, we have hugetlb pte entries at the pmd and pud level for
book3s64. We don't need to create a separate page table cache for that. With 4k
we need to make sure hugepd page table cache for 16M is placed at PUD level
and 16G at the PGD level.
Simplify all these by not using HUGEPD_PD_SHIFT which is confusing for book3s64.
Without this patch, with 64k page size we create pagetable caches with shift
value 10 and 7 which are not used at all.
Fixes: 419df06eea5b ("powerpc: Reduce the PTE_INDEX_SIZE")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
With split PTL (page table lock) config, we allocate the level
4 (leaf) page table using pte fragment framework instead of slab cache
like other levels. This was done to enable us to have split page table
lock at the level 4 of the page table. We use page->plt backing the
all the level 4 pte fragment for the lock.
Currently with Radix, we use only 16 fragments out of the allocated
page. In radix each fragment is 256 bytes which means we use only 4k
out of the allocated 64K page wasting 60k of the allocated memory.
This was done earlier to keep it closer to hash.
This patch update the pte fragment count to 256, thereby using the
full 64K page and reducing the memory usage. Performance tests shows
really low impact even with THP disabled. With THP disabled we will be
contenting further less on level 4 ptl and hence the impact should be
further low.
256 threads:
without patch (10 runs of ./ebizzy -m -n 1000 -s 131072 -S 100)
median = 15678.5
stdev = 42.1209
with patch:
median = 15354
stdev = 194.743
This is with THP disabled. With THP enabled the impact of the patch
will be less.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Adds more code comments. We also remove an unnecessary pkey check
after we check for pkey error in this patch.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
When stop is executed with EC=ESL=0, it appears to execute like a
normal instruction (resuming from NIP when woken by interrupt). So all
the save/restore handling can be avoided completely. In particular NV
GPRs do not have to be saved, and MSR does not have to be switched
back to kernel MSR.
So move the test for EC=ESL=0 sleep states out to power9_idle_stop,
and return directly to the caller after stop in that case.
This improves performance for ping-pong benchmark with the stop0_lite
idle state by 2.54% for 2 threads in the same core, and 2.57% for
different cores. Performance increase with HV_POSSIBLE defined will be
improved further by avoiding the hwsync.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new CEC pin injection code for testing purposes
- DVB frontend cxd2099 promoted from staging
- new platform driver for Sony cxd2880 DVB devices
- new sensor drivers: mt9t112, ov2685, ov5695, ov772x, tda1997x,
tw9910.c
- removal of unused cx18 and ivtv alsa mixers
- the reneseas-ceu driver doesn't depend on soc_camera anymore and
moved from staging
- removed the mantis_vp3028 driver, unused since 2009
- s5p-mfc: add support for version 10 of the MSP
- added a decoder for imon protocol
- atomisp: lots of cleanups
- imx074 and mt9t031: don't depend on soc_camera anymore, being
promoted from staging
- added helper functions to better support DVB I2C binding
- lots of driver improvements and cleanups
* tag 'media/v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (438 commits)
media: v4l2-ioctl: rename a temp var that stores _IOC_SIZE(cmd)
media: fimc-capture: get rid of two warnings
media: dvb-usb-v2: fix a missing dependency of I2C_MUX
media: uvc: to the right check at uvc_ioctl_enum_framesizes()
media: cec-core: fix a bug at cec_error_inj_write()
media: tda9840: cleanup a warning
media: tm6000: avoid casting just to print pointer address
media: em28xx-input: improve error handling code
media: zr364xx: avoid casting just to print pointer address
media: vivid-radio-rx: add a cast to avoid a warning
media: saa7134-alsa: don't use casts to print a buffer address
media: solo6x10: get rid of an address space warning
media: zoran: don't cast pointers to print them
media: ir-kbd-i2c: change the if logic to avoid a warning
media: ir-kbd-i2c: improve error handling code
media: saa7134-input: improve error handling
media: s2255drv: fix a casting warning
media: ivtvfb: Cleanup some warnings
media: videobuf-dma-sg: Fix a weird cast
soc_camera: fix a weird cast on printk
...
|
|
Commit 3d4fbffdd703 ("powerpc/64s/idle: POWER9 implement a separate
idle stop function for hotplug") that added power9_offline_stop() was
written before commit 7672691a08c8 ("powerpc/powernv: Provide a way to
force a core into SMT4 mode").
When merging the former I failed to notice that it caused us to skip
the force-SMT4 logic for offline CPUs. The result is that offlined
CPUs will not correctly participate in the force-SMT4 logic, which
presumably will result in badness (not tested).
Reconcile the two commits by making power9_offline_stop() a pre-cursor
to power9_idle_stop(), so that they share the force-SMT4 logic.
This is based on an original commit from Nick, all breakage is my own.
Fixes: 3d4fbffdd703 ("powerpc/64s/idle: POWER9 implement a separate idle stop function for hotplug")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- add a shell script to get Clang version
- improve portability of build scripts
- drop always-enabled CONFIG_THIN_ARCHIVE and remove unused code
- rename built-in.o which is now thin archive to built-in.a
- process clean/build targets one by one to get along with -j option
- simplify ld-option
- improve building with CONFIG_TRIM_UNUSED_KSYMS
- define KBUILD_MODNAME even for objects shared among multiple modules
- avoid linking multiple instances of same objects from composite
objects
- move <linux/compiler_types.h> to c_flags to include it only for C
files
- clean-up various Makefiles
* tag 'kbuild-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (29 commits)
kbuild: get <linux/compiler_types.h> out of <linux/kconfig.h>
kbuild: clean up link rule of composite modules
kbuild: clean up archive rule of built-in.a
kbuild: remove partial section mismatch detection for built-in.a
net: liquidio: clean up Makefile for simpler composite object handling
lib: zstd: clean up Makefile for simpler composite object handling
kbuild: link $(real-obj-y) instead of $(obj-y) into built-in.a
kbuild: rename real-objs-y/m to real-obj-y/m
kbuild: move modname and modname-multi close to modname_flags
kbuild: simplify modname calculation
kbuild: fix modname for composite modules
kbuild: define KBUILD_MODNAME even if multiple modules share objects
kbuild: remove unnecessary $(subst $(obj)/, , ...) in modname-multi
kbuild: Use ls(1) instead of stat(1) to obtain file size
kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS
kbuild: move include/config/ksym/* to include/ksym/*
kbuild: move CONFIG_TRIM_UNUSED_KSYMS code unneeded for external module
kbuild: restore autoksyms.h touch to the top Makefile
kbuild: move 'scripts' target below
kbuild: remove wrong 'touch' in adjust_autoksyms.sh
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"Lots of small enhancements and fixes in this patchset:
- improved the x86-64 compatibility for PCI cards by returning -1UL
for timed out MMIO transactions (instead of crashing)
- fixed HPMC handler for PAT machines: size needs to be multiple of 16
- prepare machine_power_off() to be able to turn rp3410 and c8000
machines off via IMPI
- added code to extract machine info for usage with qemu
- some init sections fixes
- lots of fixes for sparse-, ubsan- and uninitalized variables
warnings"
* 'parisc-4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix out of array access in match_pci_device()
parisc: Add code generator for Qemu/SeaBIOS machine info
parisc/pci: Switch LBA PCI bus from Hard Fail to Soft Fail mode
parisc: Fix HPMC handler by increasing size to multiple of 16 bytes
parisc: Directly call machine_power_off() in power button driver
parisc: machine_power_off() should call pm_power_off()
parisc/Kconfig: SMP kernels boot on all machines
parisc: Silence uninitialized variable warning in dbl_to_sgl_fcnvff()
parisc: Move various functions and strings to init section
parisc: Convert MAP_TYPE to cover 4 bits on parisc
parisc: Force to various endian types for sparse
parisc/gscps2: Fix sparse warnings
parisc/led: Fix sparse warnings
parisc/parport_gsc: Use NULL to avoid sparse warning
parisc/stifb: Use fb_memset() to avoid sparse warning
|
|
Pull sparc updates from David Miller:
1) Add support for ADI (Application Data Integrity) found in more
recent sparc64 cpus. Essentially this is keyed based access to
virtual memory, and if the key encoded in the virual address is
wrong you get a trap.
The mm changes were reviewed by Andrew Morton and others.
Work by Khalid Aziz.
2) Validate DAX completion index range properly, from Rob Gardner.
3) Add proper Kconfig deps for DAX driver. From Guenter Roeck.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next:
sparc64: Make atomic_xchg() an inline function rather than a macro.
sparc64: Properly range check DAX completion index
sparc: Make auxiliary vectors for ADI available on 32-bit as well
sparc64: Oracle DAX driver depends on SPARC64
sparc64: Update signal delivery to use new helper functions
sparc64: Add support for ADI (Application Data Integrity)
mm: Allow arch code to override copy_highpage()
mm: Clear arch specific VM flags on protection change
mm: Add address parameter to arch_validate_prot()
sparc64: Add auxiliary vectors to report platform ADI properties
sparc64: Add handler for "Memory Corruption Detected" trap
sparc64: Add HV fault type handlers for ADI related faults
sparc64: Add support for ADI register fields, ASIs and traps
mm, swap: Add infrastructure for saving page metadata on swap
signals, sparc: Add signal codes for ADI violations
|
|
Pull networking updates from David Miller:
1) Support offloading wireless authentication to userspace via
NL80211_CMD_EXTERNAL_AUTH, from Srinivas Dasari.
2) A lot of work on network namespace setup/teardown from Kirill Tkhai.
Setup and cleanup of namespaces now all run asynchronously and thus
performance is significantly increased.
3) Add rx/tx timestamping support to mv88e6xxx driver, from Brandon
Streiff.
4) Support zerocopy on RDS sockets, from Sowmini Varadhan.
5) Use denser instruction encoding in x86 eBPF JIT, from Daniel
Borkmann.
6) Support hw offload of vlan filtering in mvpp2 dreiver, from Maxime
Chevallier.
7) Support grafting of child qdiscs in mlxsw driver, from Nogah
Frankel.
8) Add packet forwarding tests to selftests, from Ido Schimmel.
9) Deal with sub-optimal GSO packets better in BBR congestion control,
from Eric Dumazet.
10) Support 5-tuple hashing in ipv6 multipath routing, from David Ahern.
11) Add path MTU tests to selftests, from Stefano Brivio.
12) Various bits of IPSEC offloading support for mlx5, from Aviad
Yehezkel, Yossi Kuperman, and Saeed Mahameed.
13) Support RSS spreading on ntuple filters in SFC driver, from Edward
Cree.
14) Lots of sockmap work from John Fastabend. Applications can use eBPF
to filter sendmsg and sendpage operations.
15) In-kernel receive TLS support, from Dave Watson.
16) Add XDP support to ixgbevf, this is significant because it should
allow optimized XDP usage in various cloud environments. From Tony
Nguyen.
17) Add new Intel E800 series "ice" ethernet driver, from Anirudh
Venkataramanan et al.
18) IP fragmentation match offload support in nfp driver, from Pieter
Jansen van Vuuren.
19) Support XDP redirect in i40e driver, from Björn Töpel.
20) Add BPF_RAW_TRACEPOINT program type for accessing the arguments of
tracepoints in their raw form, from Alexei Starovoitov.
21) Lots of striding RQ improvements to mlx5 driver with many
performance improvements, from Tariq Toukan.
22) Use rhashtable for inet frag reassembly, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1678 commits)
net: mvneta: improve suspend/resume
net: mvneta: split rxq/txq init and txq deinit into SW and HW parts
ipv6: frags: fix /proc/sys/net/ipv6/ip6frag_low_thresh
net: bgmac: Fix endian access in bgmac_dma_tx_ring_free()
net: bgmac: Correctly annotate register space
route: check sysctl_fib_multipath_use_neigh earlier than hash
fix typo in command value in drivers/net/phy/mdio-bitbang.
sky2: Increase D3 delay to sky2 stops working after suspend
net/mlx5e: Set EQE based as default TX interrupt moderation mode
ibmvnic: Disable irqs before exiting reset from closed state
net: sched: do not emit messages while holding spinlock
vlan: also check phy_driver ts_info for vlan's real device
Bluetooth: Mark expected switch fall-throughs
Bluetooth: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for BTUSB_QCA_ROME
Bluetooth: btrsi: remove unused including <linux/version.h>
Bluetooth: hci_bcm: Remove DMI quirk for the MINIX Z83-4
sh_eth: kill useless check in __sh_eth_get_regs()
sh_eth: add sh_eth_cpu_data::no_xdfar flag
ipv6: factorize sk_wmem_alloc updates done by __ip6_append_data()
ipv4: factorize sk_wmem_alloc updates done by __ip_append_data()
...
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Export host capabilities through debugfs
- Export card RCA register via sysfs
- Improve card initializing sequence while enabling 4-bit bus
- Export a function to enable/disable wakeup for card detect IRQ
MMC host:
- dw_mmc: Add support for new hi3798cv200 variant
- dw_mmc: Remove support for some deprecated DT properties
- mediatek: Add support for new variant used on MT7622 SoC
- sdhci: Improve wakeup support for SDIO IRQs
- sdhci: Improve wakeup support for card detect IRQs
- sdhci-omap: Add tuning support
- sdhci_omap: Add UHS-I mode support
- sunxi: Prepare for runtime PM support via a few re-factorings
- tmio: deprecate "toshiba,mmc-wrprotect-disable" DT property
- tmio/renesas_sdhi: Consolidate code supporting write protect
- tmio: Improve DMA vs PIO handling
- tmio: Add support for IP-builtin card detection logic"
* tag 'mmc-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (55 commits)
mmc: renesas_sdhi: replace EXT_ACC with HOST_MODE
mmc: update sdio_claim_irq documentation
mmc: Export host capabilities to debugfs.
mmc: core: Disable HPI for certain Micron (Numonyx) eMMC cards
mmc: block: fix updating ext_csd caches on ioctl call
mmc: sunxi: Set our device drvdata earlier
mmc: sunxi: Move the reset deassertion before enabling the clocks
mmc: sunxi: Move resources management to separate functions
mmc: dw_mmc: add support for hi3798cv200 specific extensions of dw-mshc
dt-bindings: mmc: add bindings for hi3798cv200-dw-mshc
mmc: core: Export card RCA register via sysfs
mmc: renesas_sdhi: fix WP detection
mmc: core: Use memdup_user() rather than duplicating its implementation
mmc: dw_mmc-rockchip: correct property names in debug
mmc: sd: Remove redundant err assignment from mmc_read_switch
mmc: sdio: Check the return value of sdio_enable_4bit_bus
mmc: core: Don't try UHS-I mode if 4-bit mode isn't supported
arm64: dts: hi3660: remove 'num-slots' property for dwmmc
ARM: dts: lpc18xx: remove 'num-slots' property for dwmmc
arm64: dts: stratix10: remove 'num-slots' property for dwmmc
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
- Microsemi Ocelot reset support
- Spreadtrum SC27xx reset support
- generic gpio charger: lot's of cleanups
- axp20x fuel gauge: add AXP813 support
- misc fixes, including one devicetree change for the Nokia N900, that
has been Acked-by Tony Lindgren
* tag 'for-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (27 commits)
power: reset: at91-reset: Switch from the pr_*() to the dev_*() logging functions
power: reset: at91-poweroff: Remove redundant dev_err call in at91_poweroff_probe()
power: reset: at91-poweroff: Switch from the pr_*() to the dev_*() logging functions
power: reset: make function sc27xx_poweroff_shutdown static
power: supply: da9150-fg: remove VLA usage
ARM: dts: omap3-n900: Add link between battery and charger
power: supply: bq2415x: add DT referencing support
power: supply: bq27xxx: support missing supplier device
max17042: propagate of_node to power supply device
power: supply: axp288_fuel_gauge: Fix full status reporting
power: supply: axp288_fuel_gauge: Do not register FG on ECS EF20EA
power: reset: gpio-poweroff: Support for timeout from device property
dt-bindings: power: reset: gpio-poweroff: Add 'timeout-ms' property
power: reset: Add Spreadtrum SC27xx PMIC power off support
power: supply: axp20x_battery: add support for AXP813
dt-bindings: power: supply: axp20x: add AXP813 battery DT binding
power: supply: axp20x_battery: use data struct for variant specific code
power: supply: gpio-charger: Remove pdata from gpio_charger
power: supply: gpio-charger: Use GPIOF_ACTIVE_LOW for legacy setup
power: supply: gpio-charger: Remove redundant dev_err call in probe function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull SPI updates from Mark Brown:
"A quiet release for SPI, some fixes and small updates for individual
drivers with one bigger change from Linus Walleij which coverts the
bitbanging SPI driver to use the GPIO descriptor API from Linus
Walleij.
Since GPIO descriptors were used by platform data this means there's a
few changes in arch/ making relevant updates for a few platforms and
one misc driver that are affected"
* tag 'spi-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (24 commits)
MAINTAINERS: update Andi's e-mail
spi: spi-atmel: Use correct enum for DMA transfer direction
spi: sh-msiof: Document R-Car M3-N support
spi: sh-msiof: Use correct enum for DMA transfer direction
spi: sprd: Add the support of restarting the system
spi: sprd: Simplify the transfer function
spi: Fix unregistration of controller with fixed SPI bus number
spi: rspi: use correct enum for DMA transfer direction
spi: jcore: disable ref_clk after getting its rate
spi: bcm-qspi: fIX some error handling paths
spi: pxa2xx: Disable runtime PM if controller registration fails
spi: tegra20-slink: use true and false for boolean values
spi: Fix scatterlist elements size in spi_map_buf
spi: atmel: init FIFOs before spi enable
spi: orion: Prepare space for per-child options
spi: orion: Make the error message greppable
spi: orion: Rework GPIO CS handling
spi: bcm2835aux: Avoid 64-bit arithmetic in xfer len calc
spi: spi-gpio: Augment device tree bindings
spi: spi-gpio: Rewrite to use GPIO descriptors
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These update the cpuidle poll state definition to reduce excessive
energy usage related to it, add new CPU ID to the RAPL power capping
driver, update the ACPI system suspend code to handle some special
cases better, extend the PM core's device links code slightly, add new
sysfs attribute for better suspend-to-idle diagnostics and easier
hibernation handling, update power management tools and clean up
cpufreq quite a bit.
Specifics:
- Modify the cpuidle poll state implementation to prevent CPUs from
staying in the loop in there for excessive times (Rafael Wysocki).
- Add Intel Cannon Lake chips support to the RAPL power capping
driver (Joe Konno).
- Add reference counting to the device links handling code in the PM
core (Lukas Wunner).
- Avoid reconfiguring GPEs on suspend-to-idle in the ACPI system
suspend code (Rafael Wysocki).
- Allow devices to be put into deeper low-power states via ACPI if
both _SxD and _SxW are missing (Daniel Drake).
- Reorganize the core ACPI suspend-to-idle wakeup code to avoid a
keyboard wakeup issue on Asus UX331UA (Chris Chiu).
- Prevent the PCMCIA library code from aborting suspend-to-idle due
to noirq suspend failures resulting from incorrect assumptions
(Rafael Wysocki).
- Add coupled cpuidle supprt to the Exynos3250 platform (Marek
Szyprowski).
- Add new sysfs file to make it easier to specify the image storage
location during hibernation (Mario Limonciello).
- Add sysfs files for collecting suspend-to-idle usage and time
statistics for CPU idle states (Rafael Wysocki).
- Update the pm-graph utilities (Todd Brandt).
- Reduce the kernel log noise related to reporting Low-power Idle
constraings by the ACPI system suspend code (Rafael Wysocki).
- Make it easier to distinguish dedicated wakeup IRQs in the
/proc/interrupts output (Tony Lindgren).
- Add the frequency table validation in cpufreq to the core and drop
it from a number of cpufreq drivers (Viresh Kumar).
- Drop "cooling-{min|max}-level" for CPU nodes from a couple of DT
bindings (Viresh Kumar).
- Clean up the CPU online error code path in the cpufreq core (Viresh
Kumar).
- Fix assorted issues in the SCPI, CPPC, mediatek and tegra186
cpufreq drivers (Arnd Bergmann, Chunyu Hu, George Cherian, Viresh
Kumar).
- Drop memory allocation error messages from a few places in cpufreq
and cpuildle drivers (Markus Elfring)"
* tag 'pm-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (56 commits)
ACPI / PM: Fix keyboard wakeup from suspend-to-idle on ASUS UX331UA
cpufreq: CPPC: Use transition_delay_us depending transition_latency
PM / hibernate: Change message when writing to /sys/power/resume
PM / hibernate: Make passing hibernate offsets more friendly
cpuidle: poll_state: Avoid invoking local_clock() too often
PM: cpuidle/suspend: Add s2idle usage and time state attributes
cpuidle: Enable coupled cpuidle support on Exynos3250 platform
cpuidle: poll_state: Add time limit to poll_idle()
cpufreq: tegra186: Don't validate the frequency table twice
cpufreq: speedstep: Don't validate the frequency table twice
cpufreq: sparc: Don't validate the frequency table twice
cpufreq: sh: Don't validate the frequency table twice
cpufreq: sfi: Don't validate the frequency table twice
cpufreq: scpi: Don't validate the frequency table twice
cpufreq: sc520: Don't validate the frequency table twice
cpufreq: s3c24xx: Don't validate the frequency table twice
cpufreq: qoirq: Don't validate the frequency table twice
cpufreq: pxa: Don't validate the frequency table twice
cpufreq: ppc_cbe: Don't validate the frequency table twice
cpufreq: powernow: Don't validate the frequency table twice
...
|
|
The device tree code looks for CONFIG_CMDLINE_FORCE, but we were using
CONFIG_CMDLINE_OVERRIDE. It looks like this was just a hold over from
before our device tree conversion -- in fact, we'd already removed the
support for CONFIG_CMDLINE_OVERRIDE from our arch-specific code so it
didn't even work any more.
Thanks to Mortiz and Trung for finding the original bug, and for Michael
for suggeting a better fix.
CC: Trung Tran <trung.tran@ettus.com>
CC: Michael J Clark <mjc@sifive.com>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
This avoids a lot of -Wunused warnings such as:
====================
kernel/debug/debug_core.c: In function ‘kgdb_cpu_enter’:
./arch/sparc/include/asm/cmpxchg_64.h:55:22: warning: value computed is not used [-Wunused-value]
#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
./arch/sparc/include/asm/atomic_64.h:86:30: note: in expansion of macro ‘xchg’
#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
^~~~
kernel/debug/debug_core.c:508:4: note: in expansion of macro ‘atomic_xchg’
atomic_xchg(&kgdb_active, cpu);
^~~~~~~~~~~
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently powernv reboot and shutdown requests just leave secondaries
to do their own things. This is undesirable because they can trigger
any number of watchdogs while waiting for reboot, but also we don't
know what else they might be doing -- they might be causing trouble,
trampling memory, etc.
The opal scheduled flash update code already ran into watchdog problems
due to flashing taking a long time, and it was fixed with 2196c6f1ed
("powerpc/powernv: Return secondary CPUs to firmware before FW update"),
which returns secondaries to opal. It's been found that regular reboots
can take over 10 seconds, which can result in the hard lockup watchdog
firing,
reboot: Restarting system
[ 360.038896709,5] OPAL: Reboot request...
Watchdog CPU:0 Hard LOCKUP
Watchdog CPU:44 detected Hard LOCKUP other CPUS:16
Watchdog CPU:16 Hard LOCKUP
watchdog: BUG: soft lockup - CPU#16 stuck for 3s! [swapper/16:0]
This patch removes the special case for flash update, and calls
smp_send_stop in all cases before calling reboot/shutdown.
smp_send_stop could return CPUs to OPAL, the main reason not to is
that the request could come from a NMI that interrupts OPAL code,
so re-entry to OPAL can cause a number of problems. Putting
secondaries into simple spin loops improves the chances of a
successful reboot.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The hard lockup watchdog can fire under local_irq_disable
on platforms with irq soft masking.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Use the NMI IPI rather than smp_call_function for smp_send_stop.
Have stopped CPUs hard disable interrupts rather than just soft
disable.
This function is used in crash/panic/shutdown paths to bring other
CPUs down as quickly and reliably as possible, and minimizing their
potential to cause trouble.
Avoiding the Linux smp_call_function infrastructure and (if supported)
using true NMI IPIs makes this more robust.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The PSSCR value is not stored to PACA_REQ_PSSCR if the CPU does not
have the XER[SO] bug.
Fix this by storing up-front, outside the workaround code. The initial
test is not required because it is a slow path.
The workaround is made to depend on CONFIG_KVM_BOOK3S_HV_POSSIBLE, to
match pnv_power9_force_smt4_catch() where it is used. Drop the comment
on pnv_power9_force_smt4_catch() as it's no longer true.
Fixes: 7672691a08c8 ("powerpc/powernv: Provide a way to force a core into SMT4 mode")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
After migration the security feature flags might have changed (e.g.,
destination system with unpatched firmware), but some flags are not
set/clear again in init_cpu_char_feature_flags() because it assumes
the security flags to be the defaults.
Additionally, if the H_GET_CPU_CHARACTERISTICS hypercall fails then
init_cpu_char_feature_flags() does not run again, which potentially
might leave the system in an insecure or sub-optimal configuration.
So, just restore the security feature flags to the defaults assumed
by init_cpu_char_feature_flags() so it can set/clear them correctly,
and to ensure safe settings are in place in case the hypercall fail.
Fixes: f636c14790ea ("powerpc/pseries: Set or clear security feature flags")
Depends-on: 19887d6a28e2 ("powerpc: Move default security feature flags")
Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This moves the definition of the default security feature flags
(i.e., enabled by default) closer to the security feature flags.
This can be used to restore current flags to the default flags.
Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
flush_thread() calls __set_breakpoint() via set_debug_reg_defaults()
without checking ppc_breakpoint_available(). On Power8 or later CPUs
which have the DAWR feature disabled that will cause a write to the
DABR which is incorrect as those CPUs don't have a DABR.
Fix it two ways, by checking ppc_breakpoint_available() in
set_debug_reg_defaults(), and also by reworking __set_breakpoint() to
only write to DABR on Power7 or earlier.
Fixes: 9654153158d3 ("powerpc: Disable DAWR in the base POWER9 CPU features")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Rework the logic in __set_breakpoint()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
arch/powerpc/kvm/book3s_hv.c: In function ‘kvmppc_h_set_mode’:
arch/powerpc/kvm/book3s_hv.c:745:8: error: implicit declaration of function ‘ppc_breakpoint_available’
if (!ppc_breakpoint_available())
^~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 398e712c007f ("KVM: PPC: Book3S HV: Return error from h_set_mode(SET_DAWR) on POWER9")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Commit 8e0b634b1327 ("powerpc/64s: Do not allocate lppaca if we are
not virtualized") removed allocation of lppaca on bare metal
platforms. But with CONFIG_PPC_SPLPAR enabled, we still access the
lppaca on bare metal in some code paths.
Fix this but adding runtime checks for SPLPAR (shared processor LPAR).
Fixes: 8e0b634b1327 ("powerpc/64s: Do not allocate lppaca if we are not virtualized")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux
Pull removal of in-kernel calls to syscalls from Dominik Brodowski:
"System calls are interaction points between userspace and the kernel.
Therefore, system call functions such as sys_xyzzy() or
compat_sys_xyzzy() should only be called from userspace via the
syscall table, but not from elsewhere in the kernel.
At least on 64-bit x86, it will likely be a hard requirement from
v4.17 onwards to not call system call functions in the kernel: It is
better to use use a different calling convention for system calls
there, where struct pt_regs is decoded on-the-fly in a syscall wrapper
which then hands processing over to the actual syscall function. This
means that only those parameters which are actually needed for a
specific syscall are passed on during syscall entry, instead of
filling in six CPU registers with random user space content all the
time (which may cause serious trouble down the call chain). Those
x86-specific patches will be pushed through the x86 tree in the near
future.
Moreover, rules on how data may be accessed may differ between kernel
data and user data. This is another reason why calling sys_xyzzy() is
generally a bad idea, and -- at most -- acceptable in arch-specific
code.
This patchset removes all in-kernel calls to syscall functions in the
kernel with the exception of arch/. On top of this, it cleans up the
three places where many syscalls are referenced or prototyped, namely
kernel/sys_ni.c, include/linux/syscalls.h and include/linux/compat.h"
* 'syscalls-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux: (109 commits)
bpf: whitelist all syscalls for error injection
kernel/sys_ni: remove {sys_,sys_compat} from cond_syscall definitions
kernel/sys_ni: sort cond_syscall() entries
syscalls/x86: auto-create compat_sys_*() prototypes
syscalls: sort syscall prototypes in include/linux/compat.h
net: remove compat_sys_*() prototypes from net/compat.h
syscalls: sort syscall prototypes in include/linux/syscalls.h
kexec: move sys_kexec_load() prototype to syscalls.h
x86/sigreturn: use SYSCALL_DEFINE0
x86: fix sys_sigreturn() return type to be long, not unsigned long
x86/ioport: add ksys_ioperm() helper; remove in-kernel calls to sys_ioperm()
mm: add ksys_readahead() helper; remove in-kernel calls to sys_readahead()
mm: add ksys_mmap_pgoff() helper; remove in-kernel calls to sys_mmap_pgoff()
mm: add ksys_fadvise64_64() helper; remove in-kernel call to sys_fadvise64_64()
fs: add ksys_fallocate() wrapper; remove in-kernel calls to sys_fallocate()
fs: add ksys_p{read,write}64() helpers; remove in-kernel calls to syscalls
fs: add ksys_truncate() wrapper; remove in-kernel calls to sys_truncate()
fs: add ksys_sync_file_range helper(); remove in-kernel calls to syscall
kernel: add ksys_setsid() helper; remove in-kernel call to sys_setsid()
kernel: add ksys_unshare() helper; remove in-kernel calls to sys_unshare()
...
|
|
This cleans up the module support that was commited earlier to work with
what's actually emitted from our GCC port as it lands upstream. Most of
the work here is adding new relocations to the kernel.
There's some limitations on module loading imposed by the kernel:
* The kernel doesn't support linker relaxation, which is necessary to
support R_RISCV_ALIGN. In order to get reliable module building
you're going to need to a GCC that supports the new '-mno-relax',
which IIRC isn't going to be out until 8.1.0. It's somewhat unlikely
that R_RISCV_ALIGN will appear in a module even without '-mno-relax'
support, so issues shouldn't be common.
* There is no large code model for RISC-V, which means modules must be
loaded within a 32-bit signed offset of the kernel. We don't
currently have any mechanism for ensuring this memory remains free or
moving pages around, so issues here might be common.
I fixed a singcle merge conflict in arch/riscv/kernel/Makefile.
|
|
These fixes fall into three categories
* The definiton of __smp_{store_release,load_acquire}, which allow us to
emit a full fence when unnecessary.
* Fixes to avoid relying on the behavior of "*.aqrl" atomics, as those
are specified in the currently released RISC-V memory model draft in
a way that makes them useless for Linux. This might change in the
future, but now the code matches the memory model spec as it's written
so at least we're getting closer to something sane. The actual fix is
to delete the RISC-V specific atomics and drop back to generic
versions that use the new fences from above.
* Cleanups to our atomic macros, which are mostly non-functional
changes.
Unfortunately I haven't given these as thorough of a testing as I
probably should have, but I've poked through the code and they seem
generally OK.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pul removal of obsolete architecture ports from Arnd Bergmann:
"This removes the entire architecture code for blackfin, cris, frv,
m32r, metag, mn10300, score, and tile, including the associated device
drivers.
I have been working with the (former) maintainers for each one to
ensure that my interpretation was right and the code is definitely
unused in mainline kernels. Many had fond memories of working on the
respective ports to start with and getting them included in upstream,
but also saw no point in keeping the port alive without any users.
In the end, it seems that while the eight architectures are extremely
different, they all suffered the same fate: There was one company in
charge of an SoC line, a CPU microarchitecture and a software
ecosystem, which was more costly than licensing newer off-the-shelf
CPU cores from a third party (typically ARM, MIPS, or RISC-V). It
seems that all the SoC product lines are still around, but have not
used the custom CPU architectures for several years at this point. In
contrast, CPU instruction sets that remain popular and have actively
maintained kernel ports tend to all be used across multiple licensees.
[ See the new nds32 port merged in the previous commit for the next
generation of "one company in charge of an SoC line, a CPU
microarchitecture and a software ecosystem" - Linus ]
The removal came out of a discussion that is now documented at
https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
marking any ports as deprecated but remove them all at once after I
made sure that they are all unused. Some architectures (notably tile,
mn10300, and blackfin) are still being shipped in products with old
kernels, but those products will never be updated to newer kernel
releases.
After this series, we still have a few architectures without mainline
gcc support:
- unicore32 and hexagon both have very outdated gcc releases, but the
maintainers promised to work on providing something newer. At least
in case of hexagon, this will only be llvm, not gcc.
- openrisc, risc-v and nds32 are still in the process of finishing
their support or getting it added to mainline gcc in the first
place. They all have patched gcc-7.3 ports that work to some
degree, but complete upstream support won't happen before gcc-8.1.
Csky posted their first kernel patch set last week, their situation
will be similar
[ Palmer Dabbelt points out that RISC-V support is in mainline gcc
since gcc-7, although gcc-7.3.0 is the recommended minimum - Linus ]"
This really says it all:
2498 files changed, 95 insertions(+), 467668 deletions(-)
* tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits)
MAINTAINERS: UNICORE32: Change email account
staging: iio: remove iio-trig-bfin-timer driver
tty: hvc: remove tile driver
tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers
serial: remove tile uart driver
serial: remove m32r_sio driver
serial: remove blackfin drivers
serial: remove cris/etrax uart drivers
usb: Remove Blackfin references in USB support
usb: isp1362: remove blackfin arch glue
usb: musb: remove blackfin port
usb: host: remove tilegx platform glue
pwm: remove pwm-bfin driver
i2c: remove bfin-twi driver
spi: remove blackfin related host drivers
watchdog: remove bfin_wdt driver
can: remove bfin_can driver
mmc: remove bfin_sdh driver
input: misc: remove blackfin rotary driver
input: keyboard: remove bf54x driver
...
|
|
Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
Just fail on align type. Kernel modules loader didn't do relax
like linker, it is difficult to remove or migrate the code,
but the remnant nop instructions harm the performaace of module.
We expect the building module with the no-relax option.
Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
HI20 and LO12_I/LO12_S relocate the absolute address, the range of
offset must in 32-bit.
Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
For CALL_PLT, emit the plt entry only when offset is more than 32-bit.
For PCREL_LO12, it uses the location of corresponding HI20 to
get the address of external symbol. It should check the HI20 type
is the PCREL_HI20 or GOT_HI20, because sometime the location will
have two or more relocation types.
For example:
0: 00000797 auipc a5,0x0
0: R_RISCV_ALIGN *ABS*
0: R_RISCV_GOT_HI20 SYMBOL
4: 0007b783 ld a5,0(a5) # 0 <SYMBOL>
4: R_RISCV_PCREL_LO12_I .L0
4: R_RISCV_RELAX *ABS*
Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
Separate the function symbol address from .plt to .got.plt section.
The original plt entry has trampoline code with symbol address,
there is a 32-bit padding bwtween jar instruction and symbol address.
Extract the symbol address to .got.plt to reduce the module size.
Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
