| Age | Commit message (Collapse) | Author |
|---|
|
* for-next/kdump:
arm64: kdump: Support crashkernel=X fall back to reserve region above DMA zones
arm64: kdump: Provide default size when crashkernel=Y,low is not specified
|
|
* for-next/insn:
arm64:uprobe fix the uprobe SWBP_INSN in big-endian
arm64: insn: always inline hint generation
arm64: insn: simplify insn group identification
arm64: insn: always inline predicates
arm64: insn: remove aarch64_insn_gen_prefetch()
|
|
* for-next/ftrace:
ftrace: arm64: remove static ftrace
ftrace: arm64: move from REGS to ARGS
ftrace: abstract DYNAMIC_FTRACE_WITH_ARGS accesses
ftrace: rename ftrace_instruction_pointer_set() -> ftrace_regs_set_instruction_pointer()
ftrace: pass fregs to arch_ftrace_set_direct_caller()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull cpufreq ARM updates for 6.2 from Viresh Kumar:
"- Generalize of_perf_domain_get_sharing_cpumask phandle format (Hector
Martin).
- New cpufreq driver for Apple SoC CPU P-states (Hector Martin).
- Lots of Qualcomm cpufreq driver updates, that include CPU clock
provider support, generic cleanups or reorganization, fixed a
potential memleak and the return value of cpufreq_driver->get()
(Manivannan Sadhasivam, and Chen Hui).
- Few updates to Qualcomm cpufreq driver's DT bindings, that include
support for CPU clock provider, fixing missing cache related
properties, and support for QDU1000/QRU1000 (Manivannan Sadhasivam,
Rob Herring, and Melody Olvera).
- Add support for ti,am625 SoC and enable build of ti-cpufreq for
ARCH_K3 (Dave Gerlach, and Vibhore Vardhan).
- tegra186: Use flexible array to simplify memory allocation (Christophe
JAILLET)."
* tag 'cpufreq-arm-updates-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
dt-bindings: cpufreq: cpufreq-qcom-hw: Add QDU1000/QRU1000 cpufreq
cpufreq: tegra186: Use flexible array to simplify memory allocation
cpufreq: apple-soc: Add new driver to control Apple SoC CPU P-states
cpufreq: qcom-hw: Add CPU clock provider support
dt-bindings: cpufreq: cpufreq-qcom-hw: Add cpufreq clock provider
cpufreq: qcom-hw: Fix the frequency returned by cpufreq_driver->get()
cpufreq: qcom-hw: Fix memory leak in qcom_cpufreq_hw_read_lut()
arm64: dts: ti: k3-am625-sk: Add 1.4GHz OPP
cpufreq: ti: Enable ti-cpufreq for ARCH_K3
arm64: dts: ti: k3-am625: Introduce operating-points table
cpufreq: dt-platdev: Blacklist ti,am625 SoC
cpufreq: ti-cpufreq: Add support for AM625
dt-bindings: cpufreq: qcom: Add missing cache related properties
cpufreq: qcom-hw: Move soc_data to struct qcom_cpufreq
cpufreq: qcom-hw: Use cached dev pointer in probe()
cpufreq: qcom-hw: Allocate qcom_cpufreq_data during probe
cpufreq: qcom-hw: Remove un-necessary cpumask_empty() check
cpufreq: Generalize of_perf_domain_get_sharing_cpumask phandle format
|
|
* for-next/fpsimd:
arm64/fpsimd: Make kernel_neon_ API _GPL
|
|
* for-next/errata:
arm64: errata: Workaround possible Cortex-A715 [ESR|FAR]_ELx corruption
arm64: Add Cortex-715 CPU part definition
|
|
* for-next/dynamic-scs:
arm64: implement dynamic shadow call stack for Clang
scs: add support for dynamic shadow call stacks
arm64: unwind: add asynchronous unwind tables to kernel and modules
|
|
* for-next/cpufeature:
kselftest/arm64: Add SVE 2.1 to hwcap test
arm64/hwcap: Add support for SVE 2.1
kselftest/arm64: Add FEAT_RPRFM to the hwcap test
arm64/hwcap: Add support for FEAT_RPRFM
kselftest/arm64: Add FEAT_CSSC to the hwcap selftest
arm64/hwcap: Add support for FEAT_CSSC
arm64: Enable data independent timing (DIT) in the kernel
|
|
* for-next/asm-const:
arm64: alternative: constify alternative_has_feature_* argument
arm64: jump_label: mark arguments as const to satisfy asm constraints
|
|
The current walk_stackframe with FRAME_POINTER would stop unwinding at
ret_from_exception:
BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1518
in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 1, name: init
CPU: 0 PID: 1 Comm: init Not tainted 5.10.113-00021-g15c15974895c-dirty #192
Call Trace:
[<ffffffe0002038c8>] walk_stackframe+0x0/0xee
[<ffffffe000aecf48>] show_stack+0x32/0x4a
[<ffffffe000af1618>] dump_stack_lvl+0x72/0x8e
[<ffffffe000af1648>] dump_stack+0x14/0x1c
[<ffffffe000239ad2>] ___might_sleep+0x12e/0x138
[<ffffffe000239aec>] __might_sleep+0x10/0x18
[<ffffffe000afe3fe>] down_read+0x22/0xa4
[<ffffffe000207588>] do_page_fault+0xb0/0x2fe
[<ffffffe000201b80>] ret_from_exception+0x0/0xc
The optimization would help walk_stackframe cross the pt_regs frame and
get more backtrace of debug info:
BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1518
in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 1, name: init
CPU: 0 PID: 1 Comm: init Not tainted 5.10.113-00021-g15c15974895c-dirty #192
Call Trace:
[<ffffffe0002038c8>] walk_stackframe+0x0/0xee
[<ffffffe000aecf48>] show_stack+0x32/0x4a
[<ffffffe000af1618>] dump_stack_lvl+0x72/0x8e
[<ffffffe000af1648>] dump_stack+0x14/0x1c
[<ffffffe000239ad2>] ___might_sleep+0x12e/0x138
[<ffffffe000239aec>] __might_sleep+0x10/0x18
[<ffffffe000afe3fe>] down_read+0x22/0xa4
[<ffffffe000207588>] do_page_fault+0xb0/0x2fe
[<ffffffe000201b80>] ret_from_exception+0x0/0xc
[<ffffffe000613c06>] riscv_intc_irq+0x1a/0x72
[<ffffffe000201b80>] ret_from_exception+0x0/0xc
[<ffffffe00033f44a>] vma_link+0x54/0x160
[<ffffffe000341d7a>] mmap_region+0x2cc/0x4d0
[<ffffffe000342256>] do_mmap+0x2d8/0x3ac
[<ffffffe000326318>] vm_mmap_pgoff+0x70/0xb8
[<ffffffe00032638a>] vm_mmap+0x2a/0x36
[<ffffffe0003cfdde>] elf_map+0x72/0x84
[<ffffffe0003d05f8>] load_elf_binary+0x69a/0xec8
[<ffffffe000376240>] bprm_execve+0x246/0x53a
[<ffffffe00037786c>] kernel_execve+0xe8/0x124
[<ffffffe000aecdf2>] run_init_process+0xfa/0x10c
[<ffffffe000aece16>] try_to_run_init_process+0x12/0x3c
[<ffffffe000afa920>] kernel_init+0xb4/0xf8
[<ffffffe000201b80>] ret_from_exception+0x0/0xc
Here is the error injection test code for the above output:
drivers/irqchip/irq-riscv-intc.c:
static asmlinkage void riscv_intc_irq(struct pt_regs *regs)
{
unsigned long cause = regs->cause & ~CAUSE_IRQ_FLAG;
+ u32 tmp; __get_user(tmp, (u32 *)0);
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20221109064937.3643993-3-guoren@kernel.org
[Palmer: use SYM_CODE_*]
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The 'retp' is a pointer to the return address on the stack, so we
must pass the current return address pointer as the 'retp'
argument to ftrace_push_return_trace(). Not parent function's
return address on the stack.
Fixes: b785ec129bd9 ("riscv/ftrace: Add HAVE_FUNCTION_GRAPH_RET_ADDR_PTR support")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20221109064937.3643993-2-guoren@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
OnePlus One is a smartphone launched in 2014 and is based on the
Snapdragon 801 SoC (-AC variant).
Supported features:
* ADSP
* Charger
* Coincell charger
* Fuel gauge
* Internal storage
* Touchscreen
* UART
* USB
* Wifi/Bluetooth
Signed-off-by: Julian Goldsmith <julian@juliangoldsmith.com>
Co-developed-by: Oleg Chernovskiy <kanedias@keemail.me>
Signed-off-by: Oleg Chernovskiy <kanedias@keemail.me>
Co-developed-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221128172531.828660-2-luca@z3ntu.xyz
|
|
Rename "otg" label to "usb" to group it with other usb nodes and also
because "usb" makes more sense for a USB controller.
And now we can also better use the usb_hsX_phy labels instead of having
the ulpi -> phy@X structure in every dts.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221128171623.825572-1-luca@z3ntu.xyz
|
|
Use new qcom,msm8974pro compatible string instead of qcom,msm8974 to
clearly mark that the device is using the Pro version of the SoC.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221128131550.858724-2-dmitry.baryshkov@linaro.org
|
|
The node names should be generic and DT schema expects certain pattern:
qcom-ipq4018-ap120c-ac.dtb: leds: 'wlan2g', 'wlan5g' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221125144209.477328-2-krzysztof.kozlowski@linaro.org
|
|
Enable IMS in the domain init and allocation mapping code, but do not
enable it on the vector domain as discussed in various threads on LKML.
The interrupt remap domains can expand this setting like they do with
PCI multi MSI.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232327.022658817@linutronix.de
|
|
x86 MSI irqdomains can handle MSI-X allocation post MSI-X enable just out
of the box - on the vector domain and on the remapping domains,
Add the feature flag to the supported feature list
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232326.787373104@linutronix.de
|
|
and related code which is not longer required now that the interrupt remap
code has been converted to MSI parent domains.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232326.267353814@linutronix.de
|
|
Remove the global PCI/MSI irqdomain implementation and provide the required
MSI parent ops so the PCI/MSI code can detect the new parent and setup per
device domains.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232326.209212272@linutronix.de
|
|
Remove the global PCI/MSI irqdomain implementation and provide the required
MSI parent ops so the PCI/MSI code can detect the new parent and setup per
device domains.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232326.151226317@linutronix.de
|
|
Enable MSI parent domain support in the x86 vector domain and fixup the
checks in the iommu implementations to check whether device::msi::domain is
the default MSI parent domain. That keeps the existing logic to protect
e.g. devices behind VMD working.
The interrupt remap PCI/MSI code still works because the underlying vector
domain still provides the same functionality.
None of the other x86 PCI/MSI, e.g. XEN and HyperV, implementations are
affected either. They still work the same way both at the low level and the
PCI/MSI implementations they provide.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124232326.034672592@linutronix.de
|
|
The retries in load_ucode_intel_ap() were in place to support systems
with mixed steppings. Mixed steppings are no longer supported and there is
only one microcode image at a time. Any retries will simply reattempt to
apply the same image over and over without making progress.
[ bp: Zap the circumstantial reasoning from the commit message. ]
Fixes: 06b8534cb728 ("x86/microcode: Rework microcode loading")
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221129210832.107850-3-ashok.raj@intel.com
|
|
This is reported by kmemleak detector:
unreferenced object 0xff2000000403d000 (size 4096):
comm "kexec", pid 146, jiffies 4294900633 (age 64.792s)
hex dump (first 32 bytes):
7f 45 4c 46 02 01 01 00 00 00 00 00 00 00 00 00 .ELF............
04 00 f3 00 01 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000566ca97c>] kmemleak_vmalloc+0x3c/0xbe
[<00000000979283d8>] __vmalloc_node_range+0x3ac/0x560
[<00000000b4b3712a>] __vmalloc_node+0x56/0x62
[<00000000854f75e2>] vzalloc+0x2c/0x34
[<00000000e9a00db9>] crash_prepare_elf64_headers+0x80/0x30c
[<0000000067e8bf48>] elf_kexec_load+0x3e8/0x4ec
[<0000000036548e09>] kexec_image_load_default+0x40/0x4c
[<0000000079fbe1b4>] sys_kexec_file_load+0x1c4/0x322
[<0000000040c62c03>] ret_from_syscall+0x0/0x2
In elf_kexec_load(), a buffer is allocated via vzalloc() to store elf
headers. While it's not freed back to system when kdump kernel is
reloaded or unloaded, or when image->elf_header is successfully set and
then fails to load kdump kernel for some reason. Fix it by freeing the
buffer in arch_kimage_file_post_load_cleanup().
Fixes: 8acea455fafa ("RISC-V: Support for kexec_file on panic")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221104095658.141222-2-lihuafei1@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
This is reported by kmemleak detector:
unreferenced object 0xff60000082864000 (size 9588):
comm "kexec", pid 146, jiffies 4294900634 (age 64.788s)
hex dump (first 32 bytes):
d0 0d fe ed 00 00 12 ed 00 00 00 48 00 00 11 40 ...........H...@
00 00 00 28 00 00 00 11 00 00 00 02 00 00 00 00 ...(............
backtrace:
[<00000000f95b17c4>] kmemleak_alloc+0x34/0x3e
[<00000000b9ec8e3e>] kmalloc_order+0x9c/0xc4
[<00000000a95cf02e>] kmalloc_order_trace+0x34/0xb6
[<00000000f01e68b4>] __kmalloc+0x5c2/0x62a
[<000000002bd497b2>] kvmalloc_node+0x66/0xd6
[<00000000906542fa>] of_kexec_alloc_and_setup_fdt+0xa6/0x6ea
[<00000000e1166bde>] elf_kexec_load+0x206/0x4ec
[<0000000036548e09>] kexec_image_load_default+0x40/0x4c
[<0000000079fbe1b4>] sys_kexec_file_load+0x1c4/0x322
[<0000000040c62c03>] ret_from_syscall+0x0/0x2
In elf_kexec_load(), a buffer is allocated via kvmalloc() to store fdt.
While it's not freed back to system when kexec kernel is reloaded or
unloaded. Then memory leak is caused. Fix it by introducing riscv
specific function arch_kimage_file_post_load_cleanup(), and freeing the
buffer there.
Fixes: 6261586e0c91 ("RISC-V: Add kexec_file support")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Liao Chang <liaochang1@huawei.com>
Link: https://lore.kernel.org/r/20221104095658.141222-1-lihuafei1@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
It's truly a MSI only flag and for the upcoming per device MSI domains this
must be in the MSI flags so it can be set during domain setup without
exposing this quirk outside of x86.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124230313.454246167@linutronix.de
|
|
Merge arm64's sysreg repainting branch to avoid too many
ugly conflicts...
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/misc-6.2:
: .
: Misc fixes for 6.2:
:
: - Fix formatting for the pvtime documentation
:
: - Fix a comment in the VHE-specific Makefile
: .
KVM: arm64: Fix typo in comment
KVM: arm64: Fix pvtime documentation
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/pmu-unchained:
: .
: PMUv3 fixes and improvements:
:
: - Make the CHAIN event handling strictly follow the architecture
:
: - Add support for PMUv3p5 (64bit counters all the way)
:
: - Various fixes and cleanups
: .
KVM: arm64: PMU: Fix period computation for 64bit counters with 32bit overflow
KVM: arm64: PMU: Sanitise PMCR_EL0.LP on first vcpu run
KVM: arm64: PMU: Simplify PMCR_EL0 reset handling
KVM: arm64: PMU: Replace version number '0' with ID_AA64DFR0_EL1_PMUVer_NI
KVM: arm64: PMU: Make kvm_pmc the main data structure
KVM: arm64: PMU: Simplify vcpu computation on perf overflow notification
KVM: arm64: PMU: Allow PMUv3p5 to be exposed to the guest
KVM: arm64: PMU: Implement PMUv3p5 long counter support
KVM: arm64: PMU: Allow ID_DFR0_EL1.PerfMon to be set from userspace
KVM: arm64: PMU: Allow ID_AA64DFR0_EL1.PMUver to be set from userspace
KVM: arm64: PMU: Move the ID_AA64DFR0_EL1.PMUver limit to VM creation
KVM: arm64: PMU: Do not let AArch32 change the counters' top 32 bits
KVM: arm64: PMU: Simplify setting a counter to a specific value
KVM: arm64: PMU: Add counter_index_to_*reg() helpers
KVM: arm64: PMU: Only narrow counters that are not 64bit wide
KVM: arm64: PMU: Narrow the overflow checking when required
KVM: arm64: PMU: Distinguish between 64bit counter and 64bit overflow
KVM: arm64: PMU: Always advertise the CHAIN event
KVM: arm64: PMU: Align chained counter implementation with architecture pseudocode
arm64: Add ID_DFR0_EL1.PerfMon values for PMUv3p7 and IMP_DEF
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/mte-map-shared:
: .
: Update the MTE support to allow the VMM to use shared mappings
: to back the memslots exposed to MTE-enabled guests.
:
: Patches courtesy of Catalin Marinas and Peter Collingbourne.
: .
: Fix a number of issues with MTE, such as races on the tags
: being initialised vs the PG_mte_tagged flag as well as the
: lack of support for VM_SHARED when KVM is involved.
:
: Patches from Catalin Marinas and Peter Collingbourne.
: .
Documentation: document the ABI changes for KVM_CAP_ARM_MTE
KVM: arm64: permit all VM_MTE_ALLOWED mappings with MTE enabled
KVM: arm64: unify the tests for VMAs in memslots when MTE is enabled
arm64: mte: Lock a page for MTE tag initialisation
mm: Add PG_arch_3 page flag
KVM: arm64: Simplify the sanitise_mte_tags() logic
arm64: mte: Fix/clarify the PG_mte_tagged semantics
mm: Do not enable PG_arch_2 for all 64-bit architectures
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/pkvm-vcpu-state: (25 commits)
: .
: Large drop of pKVM patches from Will Deacon and co, adding
: a private vm/vcpu state at EL2, managed independently from
: the EL1 state. From the cover letter:
:
: "This is version six of the pKVM EL2 state series, extending the pKVM
: hypervisor code so that it can dynamically instantiate and manage VM
: data structures without the host being able to access them directly.
: These structures consist of a hyp VM, a set of hyp vCPUs and the stage-2
: page-table for the MMU. The pages used to hold the hypervisor structures
: are returned to the host when the VM is destroyed."
: .
KVM: arm64: Use the pKVM hyp vCPU structure in handle___kvm_vcpu_run()
KVM: arm64: Don't unnecessarily map host kernel sections at EL2
KVM: arm64: Explicitly map 'kvm_vgic_global_state' at EL2
KVM: arm64: Maintain a copy of 'kvm_arm_vmid_bits' at EL2
KVM: arm64: Unmap 'kvm_arm_hyp_percpu_base' from the host
KVM: arm64: Return guest memory from EL2 via dedicated teardown memcache
KVM: arm64: Instantiate guest stage-2 page-tables at EL2
KVM: arm64: Consolidate stage-2 initialisation into a single function
KVM: arm64: Add generic hyp_memcache helpers
KVM: arm64: Provide I-cache invalidation by virtual address at EL2
KVM: arm64: Initialise hypervisor copies of host symbols unconditionally
KVM: arm64: Add per-cpu fixmap infrastructure at EL2
KVM: arm64: Instantiate pKVM hypervisor VM and vCPU structures from EL1
KVM: arm64: Add infrastructure to create and track pKVM instances at EL2
KVM: arm64: Rename 'host_kvm' to 'host_mmu'
KVM: arm64: Add hyp_spinlock_t static initializer
KVM: arm64: Include asm/kvm_mmu.h in nvhe/mem_protect.h
KVM: arm64: Add helpers to pin memory shared with the hypervisor at EL2
KVM: arm64: Prevent the donation of no-map pages
KVM: arm64: Implement do_donate() helper for donating memory
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/parallel-faults:
: .
: Parallel stage-2 fault handling, courtesy of Oliver Upton.
: From the cover letter:
:
: "Presently KVM only takes a read lock for stage 2 faults if it believes
: the fault can be fixed by relaxing permissions on a PTE (write unprotect
: for dirty logging). Otherwise, stage 2 faults grab the write lock, which
: predictably can pile up all the vCPUs in a sufficiently large VM.
:
: Like the TDP MMU for x86, this series loosens the locking around
: manipulations of the stage 2 page tables to allow parallel faults. RCU
: and atomics are exploited to safely build/destroy the stage 2 page
: tables in light of multiple software observers."
: .
KVM: arm64: Reject shared table walks in the hyp code
KVM: arm64: Don't acquire RCU read lock for exclusive table walks
KVM: arm64: Take a pointer to walker data in kvm_dereference_pteref()
KVM: arm64: Handle stage-2 faults in parallel
KVM: arm64: Make table->block changes parallel-aware
KVM: arm64: Make leaf->leaf PTE changes parallel-aware
KVM: arm64: Make block->table PTE changes parallel-aware
KVM: arm64: Split init and set for table PTE
KVM: arm64: Atomically update stage 2 leaf attributes in parallel walks
KVM: arm64: Protect stage-2 traversal with RCU
KVM: arm64: Tear down unlinked stage-2 subtree after break-before-make
KVM: arm64: Use an opaque type for pteps
KVM: arm64: Add a helper to tear down unlinked stage-2 subtrees
KVM: arm64: Don't pass kvm_pgtable through kvm_pgtable_walk_data
KVM: arm64: Pass mm_ops through the visitor context
KVM: arm64: Stash observed pte value in visitor context
KVM: arm64: Combine visitor arguments into a context structure
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Return DBG_HOOK_ERROR if kprobes can not handle a BRK because it
fails to find a kprobe corresponding to the address.
Since arm64 kprobes uses stop_machine based text patching for removing
BRK, it ensures all running kprobe_break_handler() is done at that point.
And after removing the BRK, it removes the kprobe from its hash list.
Thus, if the kprobe_break_handler() fails to find kprobe from hash list,
there is a bug.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/166994753273.439920.6629626290560350760.stgit@devnote3
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Since arm64's do_page_fault() can handle the page fault correctly
than kprobe_fault_handler() according to the context, let it handle
the page fault instead of simply call fixup_exception() in the
kprobe_fault_handler().
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/166994752269.439920.4801339965959400456.stgit@devnote3
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Mark arch_stack_walk() as noinstr instead of notrace and inline functions
called from arch_stack_walk() as __always_inline so that user does not
put any instrumentations on it, because this function can be used from
return_address() which is used by lockdep.
Without this, if the kernel built with CONFIG_LOCKDEP=y, just probing
arch_stack_walk() via <tracefs>/kprobe_events will crash the kernel on
arm64.
# echo p arch_stack_walk >> ${TRACEFS}/kprobe_events
# echo 1 > ${TRACEFS}/events/kprobes/enable
kprobes: Failed to recover from reentered kprobes.
kprobes: Dump kprobe:
.symbol_name = arch_stack_walk, .offset = 0, .addr = arch_stack_walk+0x0/0x1c0
------------[ cut here ]------------
kernel BUG at arch/arm64/kernel/probes/kprobes.c:241!
kprobes: Failed to recover from reentered kprobes.
kprobes: Dump kprobe:
.symbol_name = arch_stack_walk, .offset = 0, .addr = arch_stack_walk+0x0/0x1c0
------------[ cut here ]------------
kernel BUG at arch/arm64/kernel/probes/kprobes.c:241!
PREEMPT SMP
Modules linked in:
CPU: 0 PID: 17 Comm: migration/0 Tainted: G N 6.1.0-rc5+ #6
Hardware name: linux,dummy-virt (DT)
Stopper: 0x0 <- 0x0
pstate: 600003c5 (nZCv DAIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : kprobe_breakpoint_handler+0x178/0x17c
lr : kprobe_breakpoint_handler+0x178/0x17c
sp : ffff8000080d3090
x29: ffff8000080d3090 x28: ffff0df5845798c0 x27: ffffc4f59057a774
x26: ffff0df5ffbba770 x25: ffff0df58f420f18 x24: ffff49006f641000
x23: ffffc4f590579768 x22: ffff0df58f420f18 x21: ffff8000080d31c0
x20: ffffc4f590579768 x19: ffffc4f590579770 x18: 0000000000000006
x17: 5f6b636174735f68 x16: 637261203d207264 x15: 64612e202c30203d
x14: 2074657366666f2e x13: 30633178302f3078 x12: 302b6b6c61775f6b
x11: 636174735f686372 x10: ffffc4f590dc5bd8 x9 : ffffc4f58eb31958
x8 : 00000000ffffefff x7 : ffffc4f590dc5bd8 x6 : 80000000fffff000
x5 : 000000000000bff4 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : ffff0df5845798c0 x0 : 0000000000000064
Call trace:
kprobes: Failed to recover from reentered kprobes.
kprobes: Dump kprobe:
.symbol_name = arch_stack_walk, .offset = 0, .addr = arch_stack_walk+0x0/0x1c0
------------[ cut here ]------------
kernel BUG at arch/arm64/kernel/probes/kprobes.c:241!
Fixes: 39ef362d2d45 ("arm64: Make return_address() use arch_stack_walk()")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/166994751368.439920.3236636557520824664.stgit@devnote3
Signed-off-by: Will Deacon <will@kernel.org>
|
|
* kvm-arm64/dirty-ring:
: .
: Add support for the "per-vcpu dirty-ring tracking with a bitmap
: and sprinkles on top", courtesy of Gavin Shan.
:
: This branch drags the kvmarm-fixes-6.1-3 tag which was already
: merged in 6.1-rc4 so that the branch is in a working state.
: .
KVM: Push dirty information unconditionally to backup bitmap
KVM: selftests: Automate choosing dirty ring size in dirty_log_test
KVM: selftests: Clear dirty ring states between two modes in dirty_log_test
KVM: selftests: Use host page size to map ring buffer in dirty_log_test
KVM: arm64: Enable ring-based dirty memory tracking
KVM: Support dirty ring in conjunction with bitmap
KVM: Move declaration of kvm_cpu_dirty_log_size() to kvm_dirty_ring.h
KVM: x86: Introduce KVM_REQ_DIRTY_RING_SOFT_FULL
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/52bit-fixes:
: .
: 52bit PA fixes, courtesy of Ryan Roberts. From the cover letter:
:
: "I've been adding support for FEAT_LPA2 to KVM and as part of that work have been
: testing various (84) configurations of HW, host and guest kernels on FVP. This
: has thrown up a couple of pre-existing bugs, for which the fixes are provided."
: .
KVM: arm64: Fix benign bug with incorrect use of VA_BITS
KVM: arm64: Fix PAR_TO_HPFAR() to work independently of PA_BITS.
KVM: arm64: Fix kvm init failure when mode!=vhe and VA_BITS=52.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
get_user_mapping_size() uses kvm's pgtable library to walk a user space
page table created by the kernel, and in doing so, passes metadata
that the library needs, including ia_bits, which defines the size of the
input address.
For the case where the kernel is compiled for 52 VA bits but runs on HW
that does not support LVA, it will fall back to 48 VA bits at runtime.
Therefore we must use vabits_actual rather than VA_BITS to get the true
address size.
This is benign in the current code base because the pgtable library only
uses it for error checking.
Fixes: 6011cf68c885 ("KVM: arm64: Walk userspace page tables to compute the THP mapping size")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221205114031.3972780-1-ryan.roberts@arm.com
|
|
We use uprobe in aarch64_be, which we found the tracee task would exit
due to SIGILL when we enable the uprobe trace.
We can see the replace inst from uprobe is not correct in aarch big-endian.
As in Armv8-A, instruction fetches are always treated as little-endian,
we should treat the UPROBE_SWBP_INSN as little-endian。
The test case is as following。
bash-4.4# ./mqueue_test_aarchbe 1 1 2 1 10 > /dev/null &
bash-4.4# cd /sys/kernel/debug/tracing/
bash-4.4# echo 'p:test /mqueue_test_aarchbe:0xc30 %x0 %x1' > uprobe_events
bash-4.4# echo 1 > events/uprobes/enable
bash-4.4#
bash-4.4# ps
PID TTY TIME CMD
140 ? 00:00:01 bash
237 ? 00:00:00 ps
[1]+ Illegal instruction ./mqueue_test_aarchbe 1 1 2 1 100 > /dev/null
which we debug use gdb as following:
bash-4.4# gdb attach 155
(gdb) disassemble send
Dump of assembler code for function send:
0x0000000000400c30 <+0>: .inst 0xa00020d4 ; undefined
0x0000000000400c34 <+4>: mov x29, sp
0x0000000000400c38 <+8>: str w0, [sp, #28]
0x0000000000400c3c <+12>: strb w1, [sp, #27]
0x0000000000400c40 <+16>: str xzr, [sp, #40]
0x0000000000400c44 <+20>: str xzr, [sp, #48]
0x0000000000400c48 <+24>: add x0, sp, #0x1b
0x0000000000400c4c <+28>: mov w3, #0x0 // #0
0x0000000000400c50 <+32>: mov x2, #0x1 // #1
0x0000000000400c54 <+36>: mov x1, x0
0x0000000000400c58 <+40>: ldr w0, [sp, #28]
0x0000000000400c5c <+44>: bl 0x405e10 <mq_send>
0x0000000000400c60 <+48>: str w0, [sp, #60]
0x0000000000400c64 <+52>: ldr w0, [sp, #60]
0x0000000000400c68 <+56>: ldp x29, x30, [sp], #64
0x0000000000400c6c <+60>: ret
End of assembler dump.
(gdb) info b
No breakpoints or watchpoints.
(gdb) c
Continuing.
Program received signal SIGILL, Illegal instruction.
0x0000000000400c30 in send ()
(gdb) x/10x 0x400c30
0x400c30 <send>: 0xd42000a0 0xfd030091 0xe01f00b9 0xe16f0039
0x400c40 <send+16>: 0xff1700f9 0xff1b00f9 0xe06f0091 0x03008052
0x400c50 <send+32>: 0x220080d2 0xe10300aa
(gdb) disassemble 0x400c30
Dump of assembler code for function send:
=> 0x0000000000400c30 <+0>: .inst 0xa00020d4 ; undefined
0x0000000000400c34 <+4>: mov x29, sp
0x0000000000400c38 <+8>: str w0, [sp, #28]
0x0000000000400c3c <+12>: strb w1, [sp, #27]
0x0000000000400c40 <+16>: str xzr, [sp, #40]
Signed-off-by: junhua huang <huang.junhua@zte.com.cn>
Link: https://lore.kernel.org/r/202212021511106844809@zte.com.cn
Signed-off-by: Will Deacon <will@kernel.org>
|
|
apply_alternatives_vdso(), __apply_alternatives_multi_stop() and
kernel_alternatives are not needed after booting, so mark the two
functions as __init and the var as __initconst.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20221202161859.2228-1-jszhang@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Fix the bogus masking when computing the period of a 64bit counter
with 32bit overflow. It really should be treated like a 32bit counter
for the purpose of the period.
Reported-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/Y4jbosgHbUDI0WF4@google.com
|
|
In xen_init_lock_cpu(), the @name has allocated new string by kasprintf(),
if bind_ipi_to_irqhandler() fails, it should be freed, otherwise may lead
to a memory leak issue, fix it.
Fixes: 2d9e1e2f58b5 ("xen: implement Xen-specific spinlocks")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20221123155858.11382-3-xiujianfeng@huawei.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
These local variables @{resched|pmu|callfunc...}_name saves the new
string allocated by kasprintf(), and when bind_{v}ipi_to_irqhandler()
fails, it goes to the @fail tag, and calls xen_smp_intr_free{_pv}() to
free resource, however the new string is not saved, which cause a memory
leak issue. fix it.
Fixes: 9702785a747a ("i386: move xen")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20221123155858.11382-2-xiujianfeng@huawei.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
This is needed to avoid having to parse the same device-tree
several times for a given device.
For this to work we need to install the xen_virtio_restricted_mem_acc
callback in Arm's xen_guest_init() which is same callback as x86's
PV and HVM modes already use and remove the manual assignment in
xen_setup_dma_ops(). Also we need to split the code to initialize
backend_domid into a separate function.
Prior to current patch we parsed the device-tree three times:
1. xen_setup_dma_ops()->...->xen_is_dt_grant_dma_device()
2. xen_setup_dma_ops()->...->xen_dt_grant_init_backend_domid()
3. xen_virtio_mem_acc()->...->xen_is_dt_grant_dma_device()
With current patch we parse the device-tree only once in
xen_virtio_restricted_mem_acc()->...->xen_dt_grant_init_backend_domid()
Other benefits are:
- Not diverge from x86 when setting up Xen grant DMA ops
- Drop several global functions
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20221025162004.8501-2-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Intel ICC -hotpatch inserts 2-byte "0x66 0x90" NOP at the start of each
function to reserve extra space for hot-patching, and currently it is not
possible to probe these functions because branch_setup_xol_ops() wrongly
rejects NOP with REP prefix as it treats them like word-sized branch
instructions.
Fixes: 250bbd12c2fe ("uprobes/x86: Refuse to attach uprobe to "word-sized" branch insns")
Reported-by: Seiji Nishikawa <snishika@redhat.com>
Suggested-by: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20221204173933.GA31544@redhat.com
|
|
Instead of just saying "Disabled" when MTRRs are disabled for any
reason, tell what is disabled and why.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20221205080433.16643-3-jgross@suse.com
|
|
With the decoupling of PAT and MTRR initialization, PAT will be used
even with MTRRs disabled. This seems to break booting up as TDX guest,
as the recommended sequence to set the PAT MSR across CPUs can't work
in TDX guests due to disabling caches via setting CR0.CD isn't allowed
in TDX mode.
This is an inconsistency in the Intel documentation between the SDM
and the TDX specification. For now handle TDX mode the same way as Xen
PV guest mode by just accepting the current PAT MSR setting without
trying to modify it.
[ bp: Align conditions for better readability. ]
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20221205080433.16643-2-jgross@suse.com
|
|
GRUB currently relies on the magic number in the image header of ARM and
arm64 EFI kernel images to decide whether or not the image in question
is a bootable kernel.
However, the purpose of the magic number is to identify the image as one
that implements the bare metal boot protocol, and so GRUB, which only
does EFI boot, is limited unnecessarily to booting images that could
potentially be booted in a non-EFI manner as well.
This is problematic for the new zboot decompressor image format, as it
can only boot in EFI mode, and must therefore not use the bare metal
boot magic number in its header.
For this reason, the strict magic number was dropped from GRUB, to
permit essentially any kind of EFI executable to be booted via the
'linux' command, blurring the line between the linux loader and the
chainloader.
So let's use the same field in the DOS header that RISC-V and arm64
already use for their 'bare metal' magic numbers to store a 'generic
Linux kernel' magic number, which can be used to identify bootable
kernel images in PE format which don't necessarily implement a bare
metal boot protocol in the same binary. Note that, in the context of
EFI, the MS-DOS header is only described in terms of the fields that it
shares with the hybrid PE/COFF image format, (i.e., the MS-DOS EXE magic
number at offset #0 and the PE header offset at byte offset #0x3c).
Since we aim for compatibility with EFI only, and not with MS-DOS or
MS-Windows, we can use the remaining space in the MS-DOS header however
we want.
Let's set the generic magic number for x86 images as well: existing
bootloaders already have their own methods to identify x86 Linux images
that can be booted in a non-EFI manner, and having the magic number in
place there will ease any future transitions in loader implementations
to merge the x86 and non-x86 EFI boot paths.
Note that 32-bit ARM already uses the same location in the header for a
different purpose, but the ARM support is already widely implemented and
the EFI zboot decompressor is not available on ARM anyway, so we just
disregard it here.
Acked-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The implementation of strscpy() is more robust and safer.
Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix oops in 32-bit BPF tail call tests
- Add missing declaration for machine_check_early_boot()
Thanks to Christophe Leroy and Naveen N. Rao.
* tag 'powerpc-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Add missing declaration for machine_check_early_boot()
powerpc/bpf/32: Fix Oops on tail call tests
|
|
Merge series from Mark Brown <broonie@kernel.org>:
The recently added pcm-test selftest has pointed out that systems with
the tda998x driver end up advertising that they support capture when in
reality as far as I can see the tda998x devices are transmit only. The
DAIs registered through hdmi-codec are bidirectional, meaning that for
I2S systems when combined with a typical bidrectional CPU DAI the
overall capability of the PCM is bidirectional. In most cases the I2S
links will clock OK but no useful audio will be returned which isn't so
bad but we should still not advertise the useless capability, and some
systems may notice problems for example due to pinmux management.
This is happening due to the hdmi-codec helpers not providing any
mechanism for indicating unidirectional audio so add one and use it in
the tda998x driver. It is likely other hdmi-codec users are also
affected but I don't have those systems to hand.
Mark Brown (2):
ASoC: hdmi-codec: Allow playback and capture to be disabled
drm: tda99x: Don't advertise non-existent capture support
drivers/gpu/drm/i2c/tda998x_drv.c | 2 ++
include/sound/hdmi-codec.h | 4 ++++
sound/soc/codecs/hdmi-codec.c | 30 +++++++++++++++++++++++++-----
3 files changed, 31 insertions(+), 5 deletions(-)
base-commit: f0c4d9fc9cc9462659728d168387191387e903cc
--
2.30.2
|
