| Age | Commit message (Collapse) | Author |
|---|
|
The pincontrol for sd card detection is currently missing.
Add it.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20231119130351.112261-6-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add support for the Powkiddy RK2023. The Powkiddy RK2023 is a handheld
gaming device with a 3.5 inch screen powered by the Rockchip RK3566
SoC. The device looks physically different from the Powkiddy RGB30,
but is functionally identical except for the panel.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20231117202536.1387815-7-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The Powkiddy RGB30 device is similar to the Anbernic RGxx3 series,
however there are several differences which require deleting nodes in
order to properly define the hardware. This was deemed unacceptable
for the RK2023, so instead create a common include file for the
Powkiddy RGB30 and the Powkiddy RK2023. The only notable difference
between these Powkiddy devices are the panel in use, the device
name, and the PLL_VPLL frequency necessary to support the different
panels.
Since the RK2023 was released on the market first, name the common
include file after it.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20231117202536.1387815-6-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add text explaining what they do.
No functional changes.
Closes: https://lore.kernel.org/oe-kbuild-all/202311130104.9xKAKzke-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/202311130104.9xKAKzke-lkp@intel.com
|
|
Add SDHI1 to RZ/G3S Smarc Carrier-II board. This is connected to a uSD
interface. Although Vccq doesn't cross the boundary of SoM it has
been added to RZ/G3S Smarc Carrier-II dtsi to have all the bits related to
SDHI1 in a single place. At the moment SoM is used only with RZ/G3S Smarc
Carrier-II board.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231016105344.294096-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add SDHI2 to RZ/G3S Smarc SoM. SDHI2 pins are multiplexed with SCIF1,
SSI0, IRQ0, IRQ1. The selection b/w SDHI2 and SCIF1, SSI0, IRQ0, IRQ1
is done with a switch button. To be able to select b/w these a
compilation flag has been added (SW_SD2_EN) at the moment being
instantiated to select SDHI2.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231016105344.294096-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Ignore invalid x2APIC entries in order to not waste per-CPU data
- Fix a back-to-back signals handling scenario when shadow stack is in
use
- A documentation fix
- Add Kirill as TDX maintainer
* tag 'x86_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/acpi: Ignore invalid x2APIC entries
x86/shstk: Delay signal entry SSP write until after user accesses
x86/Documentation: Indent 'note::' directive for protocol version number note
MAINTAINERS: Add Intel TDX entry
|
|
Add interrupt support for ethernet phy subnode.
Add PB8 definition to macb0 pinctrl.
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Link: https://lore.kernel.org/r/20231109131149.46397-3-mihai.sain@microchip.com
[claudiu.beznea: s/at91/microchip in commit title to match dts directory]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add interrupt support for ethernet phy subnode.
Add PB8 definition to macb0 pinctrl.
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Link: https://lore.kernel.org/r/20231109131149.46397-2-mihai.sain@microchip.com
[claudiu.beznea: s/at91/microchip in commit title to match dts directory]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
In non secure mode, soc_pm.data.mode is set when entering pm in
at91_pm_begin(). This value is used (not only) to determine if the system
is going into slow clock mode (at91_suspend_entering_slow_clock()). This
function is called from various drivers to check this and act accordingly.
If not set, the driver might enter an incorrect suspend mode. When using
secure suspend mode, at91_pm_begin() is not called and thus
soc_pm.data.mode is not set. Since when using secure suspend, only one
suspend mode is supported, set this value directly in
at91_pm_secure_init().
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Thomas Perrot <thomas.perrot@bootlin.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20231020130219.1255937-1-thomas.perrot@bootlin.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"On parisc we still sometimes need writeable stacks, e.g. if programs
aren't compiled with gcc-14. To avoid issues with the upcoming
systemd-254 we therefore have to disable prctl(PR_SET_MDWE) for now
(for parisc only).
The other two patches are minor: a bugfix for the soft power-off on
qemu with 64-bit kernel and prefer strscpy() over strlcpy():
- Fix power soft-off on qemu
- Disable prctl(PR_SET_MDWE) since parisc sometimes still needs
writeable stacks
- Use strscpy instead of strlcpy in show_cpuinfo()"
* tag 'parisc-for-6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
prctl: Disable prctl(PR_SET_MDWE) on parisc
parisc/power: Fix power soft-off when running on qemu
parisc: Replace strlcpy() with strscpy()
|
|
The current emac setting is not suitable for Orange Pi Zero 3,
move it back to Orange Pi Zero 2 DT. Also update phy mode and
delay values for emac on Orange Pi Zero 3.
With these changes, Ethernet now looks stable.
Fixes: 322bf103204b ("arm64: dts: allwinner: h616: Split Orange Pi Zero 2 DT")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20231029074009.7820-2-amadeus@jmu.edu.cn
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
The Orange Pi Zero 2W is a board based on the Allwinner H618 SoC.
It uses the RaspberryPi Zero form factor, with an optional expansion
board, connected via an FPC connector, to provide more connectors.
The base board features:
- Allwinner H618 SoC (quad Cortex-A53 cores, with 1MB L2 cache)
- 1, 2 or 4GB of LPDDR4 DRAM
- SD card socket
- two USB-C sockets, one UFP, one DFP
- HDMI connector
- (yet unsupported) WiFi module
- 16 MiB SPI flash
- power supply via the UFP USB-C port
The FPC connector provides access to two more USB host ports, Fast
Ethernet, some GPIOs, Audio Line out and the IR receiver pin.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20231020145706.705420-3-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
strlcpy() reads the entire source buffer first. This read may exceed
the destination size limit. This is both inefficient and can lead
to linear read overflows if a source string is not NUL-terminated[1].
Additionally, it returns the size of the source string, not the
resulting size of the destination string. In an effort to remove strlcpy()
completely[2], replace strlcpy() here with strscpy().
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [1]
Link: https://github.com/KSPP/linux/issues/89 [2]
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Azeem Shaikh <azeemshaikh38@gmail.com>
Cc: linux-parisc@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Thirteen hotfixes. Seven are cc:stable and the remainder pertain to
post-6.6 issues or aren't considered suitable for backporting"
* tag 'mm-hotfixes-stable-2023-11-17-14-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: more ptep_get() conversion
parisc: fix mmap_base calculation when stack grows upwards
mm/damon/core.c: avoid unintentional filtering out of schemes
mm: kmem: drop __GFP_NOFAIL when allocating objcg vectors
mm/damon/sysfs-schemes: handle tried region directory allocation failure
mm/damon/sysfs-schemes: handle tried regions sysfs directory allocation failure
mm/damon/sysfs: check error from damon_sysfs_update_target()
mm: fix for negative counter: nr_file_hugepages
selftests/mm: add hugetlb_fault_after_madv to .gitignore
selftests/mm: restore number of hugepages
selftests: mm: fix some build warnings
selftests: mm: skip whole test instead of failure
mm/damon/sysfs: eliminate potential uninitialized variable warning
|
|
tl;dr: The num_digits() function has a theoretical overflow issue.
But it doesn't affect any actual in-tree users. Fix it by using
a larger type for one of the local variables.
Long version:
There is an overflow in variable m in function num_digits when val
is >= 1410065408 which leads to the digit calculation loop to
iterate more times than required. This results in either more
digits being counted or in some cases (for example where val is
1932683193) the value of m eventually overflows to zero and the
while loop spins forever).
Currently the function num_digits is currently only being used for
small values of val in the SMP boot stage for digit counting on the
number of cpus and NUMA nodes, so the overflow is never encountered.
However it is useful to fix the overflow issue in case the function
is used for other purposes in the future. (The issue was discovered
while investigating the digit counting performance in various
kernel helper functions rather than any real-world use-case).
The simplest fix is to make m a long long, the overhead in
multiplication speed for a long long is very minor for small values
of val less than 10000 on modern processors. The alternative
fix is to replace the multiplication with a constant division
by 10 loop (this compiles down to an multiplication and shift)
without needing to make m a long long, but this is slightly slower
than the fix in this commit when measured on a range of x86
processors).
[ dhansen: subject and changelog tweaks ]
Fixes: 646e29a1789a ("x86: Improve the printout of the SMP bootup CPU table")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20231102174901.2590325-1-colin.i.king%40gmail.com
|
|
The x86 SHA-256 module contains four implementations: SSSE3, AVX, AVX2,
and SHA-NI. Commit 1c43c0f1f84a ("crypto: x86/sha - load modules based
on CPU features") made the module be autoloaded when SSSE3, AVX, or AVX2
is detected. The omission of SHA-NI appears to be an oversight, perhaps
because of the outdated file-level comment. This patch fixes this,
though in practice this makes no difference because SSSE3 is a subset of
the other three features anyway. Indeed, sha256_ni_transform() executes
SSSE3 instructions such as pshufb.
Reviewed-by: Roxana Nicolescu <roxana.nicolescu@canonical.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The x86 SHA-1 module contains four implementations: SSSE3, AVX, AVX2,
and SHA-NI. Commit 1c43c0f1f84a ("crypto: x86/sha - load modules based
on CPU features") made the module be autoloaded when SSSE3, AVX, or AVX2
is detected. The omission of SHA-NI appears to be an oversight, perhaps
because of the outdated file-level comment. This patch fixes this,
though in practice this makes no difference because SSSE3 is a subset of
the other three features anyway. Indeed, sha1_ni_transform() executes
SSSE3 instructions such as pshufb.
Reviewed-by: Roxana Nicolescu <roxana.nicolescu@canonical.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The same as the Sierra Forest, the Grand Ridge supports core C1/C6 and
module C6. But it doesn't support pkg C6 residency counter.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231116142245.1233485-4-kan.liang@linux.intel.com
|
|
A new module C6 Residency Counter is introduced in the Sierra Forest.
The scope of the new counter is module (A cluster of cores shared L2
cache). Create a brand new cstate_module PMU to profile the new counter.
The only differences between the new cstate_module PMU and the existing
cstate PMU are the scope and events.
Regarding the choice of the new cstate_module PMU name, the current
naming rule of a cstate PMU is "cstate_" + the scope of the PMU. The
scope of the PMU is the cores shared L2. On SRF, Intel calls it
"module", while the internal Linux sched code calls it "cluster". The
"cstate_module" is used as the new PMU name, because
- The Cstate PMU driver is a Intel specific driver. It doesn't impact
other ARCHs. The name makes it consistent with the documentation.
- The "cluster" mainly be used by the scheduler developer, while the
user of cstate PMU is more likely a researcher reading HW docs and
optimizing power.
- In the Intel's SDM, the "cluster" has a different meaning/scope for
topology. Using it will mislead the end users.
Besides the module C6, the core C1/C6 and pkg C6 residency counters are
supported in the Sierra Forest as well.
Suggested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231116142245.1233485-3-kan.liang@linux.intel.com
|
|
Intel cstate PMU driver will invoke the topology_cluster_cpumask() to
retrieve the CPU mask of a cluster. A modpost error is triggered since
the symbol cpu_clustergroup_mask is not exported.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231116142245.1233485-2-kan.liang@linux.intel.com
|
|
The events of the cstate_core and cstate_pkg PMU have the same format.
They both need to create a "events" group (with empty attrs). The
attr_groups can be shared.
Remove the dedicated attr_groups for each cstate PMU. Use the shared
cstate_attr_groups to replace.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231116142245.1233485-1-kan.liang@linux.intel.com
|
|
A recent submission [1] from Rob has added additionalProperties: false
to the interrupt-controller child node of RISC-V cpus, highlighting that
the new cv1800b DT has been incorrectly using #address-cells.
It has no child nodes, so #address-cells is not needed. Remove it.
Link: https://patchwork.kernel.org/project/linux-riscv/patch/20230915201946.4184468-1-robh@kernel.org/ [1]
Fixes: c3dffa879cca ("riscv: dts: sophgo: add initial CV1800B SoC device tree")
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Add support for the EVB1 analog audio to its devicetree. Only
the headphone has been tested, since I don't have matching
peripherals to test headset or speakers.
I also didn't manage to record sound from the onboard microphone,
but that also fails with the vendor kernel. Thus I assume the
microphone on my board is fried.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20231109184453.108676-2-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The expected name by the binding at this position is "msg" and the SoC's
manual also calls the interrupt in question "msg", so fix the rk356x dtsi
to use the correct name.
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20231114153834.934978-1-heiko@sntech.de
|
|
Expand the reg size for the vdec node to include cache/performance
registers the rkvdec driver writes to. Also add missing clocks to the
related power-domain.
Fixes: cbd7214402ec ("arm64: dts: rockchip: Define the rockchip Video Decoder node on rk3399")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20231105233630.3927502-10-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Expand the reg size for the vdec node to include cache/performance
registers the rkvdec driver writes to.
Fixes: 17408c9b119d ("arm64: dts: rockchip: Add vdec support for RK3328")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20231105233630.3927502-9-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Matoro reported various userspace crashes on the parisc platform with kernel
6.6 and bisected it to commit 3033cd430768 ("parisc: Use generic mmap top-down
layout and brk randomization").
That commit switched parisc to use the common infrastructure to calculate
mmap_base, but missed that the mmap_base() function takes care for
architectures where the stack grows downwards only.
Fix the mmap_base() calculation to include the stack-grows-upwards case
and thus fix the userspace crashes on parisc.
Link: https://lkml.kernel.org/r/ZVH2qeS1bG7/1J/l@p100
Fixes: 3033cd430768 ("parisc: Use generic mmap top-down layout and brk randomization")
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: matoro <matoro_mailinglist_kernel@matoro.tk>
Tested-by: matoro <matoro_mailinglist_kernel@matoro.tk>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The camera node has both unit address and children within the same bus
mapping, thus needs proper ranges property to fix dtc W=1 warnings:
Warning (unit_address_vs_reg): /soc/camera@fa600000: node has a unit name, but no reg or ranges property
Warning (simple_bus_reg): /soc/camera@fa600000: missing or empty reg/ranges property
Subtract 0xfa600000 from all its children nodes. No functional impact
expected.
Link: https://lore.kernel.org/r/20230722121719.150094-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The camera node has both unit address and children within the same bus
mapping, thus needs proper ranges property to fix dtc W=1 warnings:
Warning (unit_address_vs_reg): /soc/camera@11800000: node has a unit name, but no reg or ranges property
Warning (simple_bus_reg): /soc/camera@11800000: missing or empty reg/ranges property
Subtract 0x11800000 from all its children nodes. No functional impact
expected.
Link: https://lore.kernel.org/r/20230722121719.150094-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Devicetree for the FIMC IS camera included duplicated PMU node as its
child. This is not a correct representation of the hardware. Mapping
the PMU (Power Management Unit) IO memory should be via syscon-like
phandle (samsung,pmu-syscon, already used for other drivers), not by
duplicating "pmu" Devicetree node inside the FIMC IS.
The change is not compatible with older Linux kernel, which does not
parse samsung,pmu-syscon property.
Link: https://lore.kernel.org/r/20230722121719.150094-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
mce_device_create() is called only from mce_cpu_online() which in turn
will be called iff MCA support is available. That is, at the time of
mce_device_create() call it's guaranteed that MCA support is available.
No need to duplicate this check so remove it.
[ bp: Massage commit message. ]
Signed-off-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231107165529.407349-1-nik.borisov@suse.com
|
|
ExynosAutov9 SADK board has 3 keys to test external GPIO interrupt.
To support this, add 3 gpio-key(Wakeup, Volume Down, Volume Up) node.
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Link: https://lore.kernel.org/r/20231027040338.63088-1-jaewon02.kim@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
ExynosAutov9 reuses several devices from older designs, thus historically
we kept the old (block's) compatible only. This works fine and there is
no bug here, however guidelines expressed in
Documentation/devicetree/bindings/writing-bindings.rst state that:
1. Compatibles should be specific.
2. We should add new compatibles in case of bugs or features.
Add compatibles specific to ExynosAutov9 in front of all old-SoC-like
compatibles. This will also help reviews of new code using existing
DTS as template. No functional impact on Linux drivers behavior.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20231108104343.24192-18-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Exynos850 reuses several devices from older designs, thus historically
we kept the old (block's) compatible only. This works fine and there is
no bug here, however guidelines expressed in
Documentation/devicetree/bindings/writing-bindings.rst state that:
1. Compatibles should be specific.
2. We should add new compatibles in case of bugs or features.
Add compatibles specific to Exynos850 in front of all old-SoC-like
compatibles. This will also help reviews of new code using existing
DTS as template. No functional impact on Linux drivers behavior.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20231108104343.24192-17-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Exynos7885 reuses several devices from older designs, thus historically
we kept the old (block's) compatible only. This works fine and there is
no bug here, however guidelines expressed in
Documentation/devicetree/bindings/writing-bindings.rst state that:
1. Compatibles should be specific.
2. We should add new compatibles in case of bugs or features.
Add compatibles specific to Exynos7885 in front of all old-SoC-like
compatibles. This will also help reviews of new code using existing
DTS as template. No functional impact on Linux drivers behavior.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20231108104343.24192-16-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Exynos7 reuses several devices from older designs, thus historically
we kept the old (block's) compatible only. This works fine and there is
no bug here, however guidelines expressed in
Documentation/devicetree/bindings/writing-bindings.rst state that:
1. Compatibles should be specific.
2. We should add new compatibles in case of bugs or features.
Add compatibles specific to Exynos7 in front of all old-SoC-like
compatibles. This will also help reviews of new code using existing
DTS as template. No functional impact on Linux drivers behavior.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20231108104343.24192-15-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Exynos5433 reuses several devices from older designs, thus historically
we kept the old (block's) compatible only. This works fine and there is
no bug here, however guidelines expressed in
Documentation/devicetree/bindings/writing-bindings.rst state that:
1. Compatibles should be specific.
2. We should add new compatibles in case of bugs or features.
Add compatibles specific to Exynos5433 in front of all old-SoC-like
compatibles. This will also help reviews of new code using existing
DTS as template. No functional impact on Linux drivers behavior.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20231108104343.24192-14-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Avoid conflicts, base on fixes.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
|
|
When the CMMA state needs to be reset, the no-dat bit also needs to be
reset. Failure to do so could cause issues in the guest, since the
guest expects the bit to be cleared after a reset.
Cc: <stable@vger.kernel.org>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Message-ID: <20231109123624.37314-1-imbrenda@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
When the host invalidates a guest page, it will also check if the page
was used to map the prefix of any guest CPUs, in which case they are
stopped and marked as needing a prefix refresh. Upon starting the
affected CPUs again, their prefix pages are explicitly faulted in and
revalidated if they had been invalidated. A bit in the PGSTEs indicates
whether or not a page might contain a prefix. The bit is allowed to
overindicate. Pages above 2G are skipped, because they cannot be
prefixes, since KVM runs all guests with MSO = 0.
The same applies for nested guests (VSIE). When the host invalidates a
guest page that maps the prefix of the nested guest, it has to stop the
affected nested guest CPUs and mark them as needing a prefix refresh.
The same PGSTE bit used for the guest prefix is also used for the
nested guest. Pages above 2G are skipped like for normal guests, which
is the source of the bug.
The nested guest runs is the guest primary address space. The guest
could be running the nested guest using MSO != 0. If the MSO + prefix
for the nested guest is above 2G, the check for nested prefix will skip
it. This will cause the invalidation notifier to not stop the CPUs of
the nested guest and not mark them as needing refresh. When the nested
guest is run again, its prefix will not be refreshed, since it has not
been marked for refresh. This will cause a fatal validity intercept
with VIR code 37.
Fix this by removing the check for 2G for nested guests. Now all
invalidations of pages with the notify bit set will always scan the
existing VSIE shadow state descriptors.
This allows to catch invalidations of nested guest prefix mappings even
when the prefix is above 2G in the guest virtual address space.
Fixes: a3508fbe9dc6 ("KVM: s390: vsie: initial support for nested virtualization")
Tested-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-ID: <20231102153549.53984-1-imbrenda@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Device tree node names should not use vendor prefix, they contain a
generic name of the device. Drop the qcom, prefix from the SSBI node
name.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230928110309.1212221-37-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Device tree node names should not use vendor prefix, they contain a
generic name of the device. Drop the qcom, prefix from the SSBI node
name.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230928110309.1212221-36-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use generic `adc-channel@N' node names for board-specific ADC channels
(routed to MPP pins) to follow the schema.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230928110309.1212221-35-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Since keypad is used only by some devices, disable it by default and enable explicitly.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230928110309.1212221-34-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The vph-pwr and boost regulators (even if they are unified by design)
are not a property of SoC, so move them to board files.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230928110309.1212221-33-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The set of regulators available over the RPM requests is not a property
of the SoC. The only msm8960 board file (qcom-msm8960-cdp) also defines
this node together with the compatible string. Drop the useless device
node.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230928110309.1212221-32-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The set of regulators available over the RPM requests is not a property
of the SoC. Move them to board files.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230928110309.1212221-31-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The set of regulators available over the RPM requests is not a property
of the SoC. Move them to board files.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230928110309.1212221-30-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The set of regulators available over the RPM requests is not a property
of the SoC. Move them to board files.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230928110309.1212221-29-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
