summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2020-07-22Merge tag 'samsung-soc-5.9' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc Samsung mach/soc changes for v5.9 1. Restore big.LITTLE cpuidle support on Exynos542x boards. 2. Cleanups and minor fixes. * tag 'samsung-soc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: s3c24xx: Replace HTTP links with HTTPS ones ARM: s3c24xx: leds: Convert to use GPIO descriptors ARM: exynos: MCPM: Restore big.LITTLE cpuidle support ARM: exynos: clear L310_AUX_CTRL_FULL_LINE_ZERO in default l2c_aux_val Link: https://lore.kernel.org/r/20200721180900.13844-4-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'imx-drivers-5.9' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers i.MX drivers change for 5.9: - Update SCU irq code to call pm_system_wakeup() in general MU IRQ handler, so that system can be waked up when MU IRQ arrives. - Move i.MX SCU soc driver into imx firmware folder to get it initialized from i.MX SCU firmware driver. - Clean up soc-imx-scu driver a bit by using devm_kasprintf(). - Correct postfix setting for cm40 power domain in scu-pd driver. - Add resource management support for IMX_SCU firmware driver. - Add more cm4 resources to i.MX SCU power domain driver. - Select ARM_GIC_V3 from SOC_IMX8M for being able to use GICv3 driver in AARCH32 mode Linux on AARCH64 hardware. * tag 'imx-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: select ARM_GIC_V3 for i.MX8M firmware: imx: Move i.MX SCU soc driver into imx firmware folder firmware: imx: scu-pd: add more cm4 resources firmware: imx: add resource management api firmware: imx: scu-pd: fix cm40 power domain soc: imx: scu: use devm_kasprintf firmware: imx: make sure MU irq can wake up system from suspend mode Link: https://lore.kernel.org/r/20200720085536.24138-1-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22soc: samsung: exynos-regulator-coupler: Add simple voltage coupler for ↵Marek Szyprowski
Exynos5800 Add a simple custom voltage regulator coupler for Exynos5800 SoCs, which require coupling between "vdd_arm" and "vdd_int" regulators. This coupler ensures that the voltage values don't go below the bootloader-selected operation point during the boot process until the clients set their constraints. It is achieved by assuming minimal voltage value equal to the current value if no constraints are set. This also ensures proper voltage balancing if any of the client driver is missing. The balancing code comes from the regulator/core.c with the additional logic for handling regulators without client constraints applied added. Link: https://lore.kernel.org/r/20200721180900.13844-5-krzk@kernel.org Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22arm64: dts: sparx5: Add pinctrl supportLars Povlsen
This add pinctrl support to the Microchip Sparx5 SoC. Link: https://lore.kernel.org/r/20200615133242.24911-5-lars.povlsen@microchip.com Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22arm64: dts: sparx5: Add basic cpu supportLars Povlsen
This adds the basic DT structure for the Microchip Sparx5 SoC, and the reference boards, pcb125, pcb134 and pcb135. The two latter have a NAND vs a eMMC centric variant (as a mount option). Link: https://lore.kernel.org/r/20200615133242.24911-4-lars.povlsen@microchip.com Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22arm64: sparx5: Add support for Microchip 2xA53 SoCLars Povlsen
This adds support for the Microchip Sparx5 ARMv8-based SoC family of TSN-capable gigabit switches. Link: https://lore.kernel.org/r/20200615133242.24911-3-lars.povlsen@microchip.com Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22ARM: dts: mmp3-dell-ariel: Enable the GPULubomir Rintel
Enable the 2D (GC300) and the 3D (GC2000) GPUs cores. Link: https://lore.kernel.org/r/20200718205019.184927-14-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22ARM: dts: mmp3: Add the GPULubomir Rintel
There's a GC2000 3D core accompanied by a GC300 2D core. Link: https://lore.kernel.org/r/20200718205019.184927-13-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22ARM: dts: mmp2-olpc-xo-1-75: Enable the GPULubomir Rintel
Enable the 3D + 2D (GC860) GPU core. Link: https://lore.kernel.org/r/20200718205019.184927-12-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22ARM: dts: mmp2: Add the GPULubomir Rintel
There's a GC860 2D + 3D core. Link: https://lore.kernel.org/r/20200718205019.184927-11-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22ARM: dts: mmp2-olpc-xo-1-75: Enable audio supportLubomir Rintel
This enables the audio SRAM, DMA engine, I2S interface, and codec, hooks them together and adds a audio-graph-card instance. It also removes the jack gpios from the gpio-keys instance, because the audio jack driver registers an input device. Link: https://lore.kernel.org/r/20200718205019.184927-10-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22ARM: dts: mmp2: Add SSPA nodesLubomir Rintel
There are two I2S-capable audio serial port blocks. Link: https://lore.kernel.org/r/20200718205019.184927-9-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22ARM: dts: mmp2: Add Audio Clock controllerLubomir Rintel
This device generates the audio codec master clock and bit clock. Link: https://lore.kernel.org/r/20200718205019.184927-8-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22ARM: dts: mmp2: Add DMA nodesLubomir Rintel
There is a 16-channel peripheral DMA controller along with two-channel audio DMA engines. Link: https://lore.kernel.org/r/20200718205019.184927-7-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22ARM: dts: mmp2: Add Audio SRAMLubomir Rintel
This memory is region is where the two-channel audio DMA can pump sound samples into the SSPA's internal FIFO. Link: https://lore.kernel.org/r/20200718205019.184927-6-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22ARM: dts: mmp2: Extend the MPMU reg rangeLubomir Rintel
The ACGR register is at the offset of 0x1024, beyond the 4k originally assigned to the MPMU range. Link: https://lore.kernel.org/r/20200718205019.184927-5-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22ARM: dts: mmp2: Add #power-domain-cells to /clocksLubomir Rintel
The power management unit, described by the soc_clocks node, controls the power to the peripherals by the means of power domains with a single cell -- the domain number. Link: https://lore.kernel.org/r/20200718205019.184927-4-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22ARM: dts: mmp2-olpc-xo-1-75: Delete #address-cells from ssp3Lubomir Rintel
On the XO-1.75, this node represents a bus interface that operates in slave mode and thus is only able to accommodate a single subnode; no address cells are necessary. The Documentation/devicetree/bindings/spi/spi-controller.yaml binding prefers that we drop the property instead of setting it to zero. This fixes a DT validation error: arch/arm/boot/dts/mmp2-olpc-xo-1-75.dt.yaml: spi@d4037000: { ... } is valid under each of {'required': ['spi-slave']}, {'required': ['#address-cells']} We also need to drop #size-cells: arch/arm/boot/dts/mmp2-olpc-xo-1-75.dt.yaml: spi@d4037000: '#address-cells' is a dependency of '#size-cells' Link: https://lore.kernel.org/r/20200718205019.184927-3-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22ARM: dts: mmp2-olpc-xo-1-75: Fix camera I2C node validationLubomir Rintel
mmp2-olpc-xo-1-75.dt.yaml: camera_i2c: $nodename:0: 'camera_i2c' does not match '^i2c(@.*)?' mmp2-olpc-xo-1-75.dt.yaml: camera_i2c: 'sda-gpios' is a required property mmp2-olpc-xo-1-75.dt.yaml: camera_i2c: 'scl-gpios' is a required property The "gpios" property actually was documented as deprecated, but got dropped in commit 0175ce4a58d6 ("dt-bindings: i2c: Convert i2c-gpio binding to json-schema"). It's probably best kept forgotten though. Link: https://lore.kernel.org/r/20200718205019.184927-2-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'ux500-dts-for-v5.9-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt Ux500 DTS changes for the v5.9 kernel series: - Add touchkey to the Samsung Golden. - Fix up the supply nodes for the AB8500 PWM devices. - Fix up the cache controller node names. - Fix the Samsing Skomer accelerometer mounting matrix. * tag 'ux500-dts-for-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: dts: ux500-skomer: Correct accel mounting matrix ARM: dts: ste: Align L2 cache-controller nodename with dtschema ARM: dts: ux500: Supply nodes for the other 2 AB8500 PWM devices ARM: dts: ux500: samsung-golden: Add touchkey Link: https://lore.kernel.org/r/CACRpkdZZgZ1LeOK5zFj5Z6Mh=RVz37hZ-7Z4DQNGC1uaiEVTeA@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'stm32-dt-for-v5.9-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.9, round 1 Highlights: ---------- MCU part: -Enable stmpe811 on stm32f429 -Enable l3gd20-gyro on stm32f429 -Enable panel-ilitek-9341 on stm32f429 -Fixes for yaml validation (leds, nodes names, remove useless bindings ...) -Add stm32xxx compatibles for syscon nodes MPU part: -Add support for usb role switch to dwc2 -Add stm32xxx compatibles for syscon nodes -Update uart4 pin configuration for low power mode used by dkx and ed1 ST boards -Fix uart nodes ordering and uart7_pins_a comments -Add the support of uart instances available on STM32MP157 boards: - usart3 on stm32mp157c-ev1, stm32mp157a-dk1, and stm32mp157c-dk2 - uart7 on stm32mp157a-dk1 and stm32mp157c-dk2 - usart2 on stm32mp157c-dk2 -Configure I2C5 on stm32mp15 DK boards * tag 'stm32-dt-for-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (38 commits) ARM: dts: stm32: enable usb-role-switch on USB OTG on stm32mp15xx-dkx ARM: dts: stm32: Add compatibles for syscon for stm32mp151 ARM: dts: stm32: Add compatibles for syscon for stm32h743 ARM: dts: stm32: Add compatibles for syscon for stm32f746 ARM: dts: stm32: Add compatibles for syscon for stm32f426 dt-bindings: arm: stm32: Add compatibles for syscon nodes ARM: dts: stm32: Fix spi4 pins in stm32mp15-pinctrl ARM: dts: stm32: configure i2c5 support on stm32mp15xx-dkx ARM: dts: stm32: add usart2 node to stm32mp157c-dk2 ARM: dts: stm32: add uart7 support to stm32mp15xx-dkx boards ARM: dts: stm32: add usart3 node to stm32mp157c-ev1 ARM: dts: stm32: add usart3 node to stm32mp15xx-dkx boards ARM: dts: stm32: add usart2, usart3 and uart7 pins in stm32mp15-pinctrl ARM: dts: stm32: cosmetic updates in stm32mp15-pinctrl ARM: dts: stm32: fix uart7_pins_a comments in stm32mp15-pinctrl ARM: dts: stm32: fix uart nodes ordering in stm32mp15-pinctrl ARM: dts: stm32: Update UART4 pin states on stm32mp15xx-dkx ARM: dts: stm32: Update pin states for uart4 on stm32mp157c-ed1 ARM: dts: stm32: update uart4 pin configuration for low power on stm32mp157 dt-bindings: usb: dwc2: Fix issues for stm32mp15x SoC ... Link: https://lore.kernel.org/r/8a9bb27b-fc08-126a-11f7-01354e8577e1@st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'samsung-dt64-5.9' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM64 changes for v5.9 1. Enable UFS (Universal Flash Storage) on Exynos7 Espresso board. 2. Fix silent hang after boot off Exynos7 Espresso board. 3. Minor DTS fixes and adjustments with dtschema. * tag 'samsung-dt64-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: Add unit address to soc node and move thermal zones on Exynos7 arm64: dts: exynos: Add unit address to soc node on Exynos5433 arm64: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings arm64: dts: exynos: Keep LDO12 always-on on Espresso arm64: dts: exynos: Fix silent hang after boot on Espresso arm64: dts: exynos: Remove generic arm,armv8-pmuv3 compatible arm64: dts: exynos: Describe PWM interrupts on Exynos7 arm64: dts: exynos: Add UFS node to Exynos7 Link: https://lore.kernel.org/r/20200721180900.13844-3-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'samsung-dt-5.9' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.9 1. Enable Bluetooth on Artik5 (Exynos3250). 2. Enable accelerometer on Aries boards (Samsung Galaxy S family, S5Pv210); multiple fixes. 3. Fix highest frequencies on Exynos5800. 4. Fix rare USB instability on Odroid XU3 family (Exynos5422). 5. Minor DTS fixes and adjustments with dtschema. * tag 'samsung-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Replace HTTP links with HTTPS ones ARM: dts: exynos: Disable frequency scaling for FSYS bus on Odroid XU3 family ARM: dts: exynos: Define fixed regulators in root node for consistency in SMDK5420 ARM: dts: exynos: Define fixed regulators in root node for consistency in Arndale ARM: dts: exynos: Define fixed regulators in root node for consistency in Origen ARM: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings ARM: dts: exynos: Fix missing empty reg/ranges property regulators on Trats ARM: dts: exynos: Align L2 cache-controller nodename with dtschema ARM: dts: s5pv210: Correct BCM4329 bluetooth node ARM: dts: s5pv210: Add BMA023 accelerometer support to Aries ARM: dts: s5pv210: Add support for GP2A light sensor on Aries ARM: dts: s5pv210: Correct fuelgauge definition on Aries ARM: dts: s5pv210: Add interrupt-controller property to gph3 ARM: dts: exynos: Enable Bluetooth support for Artik5 board ARM: dts: exynos: Extend all Exynos5800 A15's OPPs with max voltage data Link: https://lore.kernel.org/r/20200721180900.13844-2-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'qcom-dts-for-5.9' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM dts updates for v5.9 Add QFPROM and ethernet for ipq8064 and a new DTS for the MikroTik RB3011 using the same platform. * tag 'qcom-dts-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: add qfprom definition to ipq806x ARM: dts: qcom: Add MikroTik RB3011 ARM: dts: qcom: add ethernet definitions to ipq8064 Link: https://lore.kernel.org/r/20200721045032.3430395-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'qcom-arm64-for-5.9' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 DT updates for v5.9 For SM8250 this adds the main pinctrl/gpio block (TLMM), I2C and SPI controllers, the CPU subsytem watchdog, inter-processor signalling controller (IPCC), always-on power/clock controller (AOSS), inter-processor state machine (SMP2P), defines remoteproc controls for audio, compute and sensor processors and base definition for the PM8009 PMIC. It also does fix up a few minor issues from the initial merge of the platform support. SC7180 and SDM845 gains interconnect paths and performance tables defined for display, QUP, QSPI, SDHC and CPUs. SC7180 gains WiFi support and some cleanups related to the modem remoteproc. SDM845 gains inline crypto engine support for UFS, LAB/IBB regulators for powering display panels, remoteproc relocation debug support SM8150 gains USB controller support and the two related PHYs, as well as thermal zones and throttling support. IPQ8074 gains USB and SDHCI support. MSM8916 is being cleaned up, gains interconnect providers and Samsung A2015 gains accelerometer and magnetometer support. MSM8994 gains PSCI, SDHCI, SPMI support, I2C, SPI, UART gains DMA support and the DTS files are cleaned up. The SDM630 platform DTS is at last merged and initial support for Sony Xperia 10, 10 Plus, XA2, XA2 Plus and XA2 Ultra is added. * tag 'qcom-arm64-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (66 commits) arm64: dts: qcom: pmi8998: Add nodes for LAB and IBB regulators arm64: dts: sc7180: Add DSI and MDP OPP tables and power-domains arm64: dts: sdm845: Add DSI and MDP OPP tables and power-domains arm64: dts: qcom: sc7180: Move the fixed-perm property to SoC dtsi arm64: dts: qcom: msm8916-samsung-a2015: Add accelerometer/magnetometer arm64: dts: qcom: msm8916: Use higher I2C drive-strength only on DB410c arm64: dts: qcom: msm8916: Simplify pinctrl configuration arm64: dts: msm8916-samsung/longcheer: Move pinctrl/regulators to end of file arm64: dts: qcom: sm8250: Drop tcsr_mutex syscon arm64: dts: qcom: sc7180: Add missing properties for Wifi node arm64: dts: qcom: Fix WiFi supplies on sc7180-idp arm64: dts: sdm845: add Inline Crypto Engine registers and clock arm64: dts: sc7180: Add sdhc opps and power-domains arm64: dts: sdm845: Add sdhc opps and power-domains arm64: dts: sc7180: Add OPP table for all qup devices arm64: dts: sdm845: Add OPP table for all qup devices arm64: dts: sc7180: Add qspi opps and power-domains arm64: dts: sdm845: Add qspi opps and power-domains arm64: dts: qcom: sdm845: Add cpu OPP tables arm64: dts: qcom: sc7180: Drop the unused non-MSA SID ... Link: https://lore.kernel.org/r/20200721044934.3430084-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'hisi-arm64-dt-for-5.9' of git://github.com/hisilicon/linux-hisi ↵Arnd Bergmann
into arm/dt ARM64: DT: Hisilicon SoCs DT updates for 5.9 - Refactor hi6220-hikey dts to use phandles for overriding nodes - Align UART node name to fix dtschema validator warnings for hi6220 - Add basic usb gadget support on hikey960 - Update adv7533 nodes to meet with the binding for hikey and hikey960 * tag 'hisi-arm64-dt-for-5.9' of git://github.com/hisilicon/linux-hisi: arm64: dts: hisilicon: hikey: fixes to comply with adi, adv7533 DT binding dts: hi3660: Add support for basic usb gadget on Hikey960 arm64: dts: hisilicon: Align UART nodename with dtschema arm64: dts: hisilicon: Use phandles for overriding nodes in hi6220 Link: https://lore.kernel.org/r/5F165E8E.3030503@hisilicon.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'hisi-arm32-dt-for-5.9' of git://github.com/hisilicon/linux-hisi ↵Arnd Bergmann
into arm/dt ARM: DT: Hisilicon ARM32 SoCs updates for v5.9 - Update L2 cache controller nodes to fix dtschema validator warnings for hi3620 and hix5hd2 * tag 'hisi-arm32-dt-for-5.9' of git://github.com/hisilicon/linux-hisi: ARM: dts: hisilicon: Align L2 cache-controller nodename with dtschema Link: https://lore.kernel.org/r/5F165FA1.2030301@hisilicon.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'sunxi-dt-for-5.9-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Our usual number of patches to improve the Allwinner Device Tree support, including: - CPUFreq / Thermal throttling support for the H5 - Touchscreen support for the Pinephone - New boards: PinePhone v1.2 * tag 'sunxi-dt-for-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h5: bananapi-m2-plus-v1.2: Tie in CPU OPPs arm64: dts: allwinner: h5: libretech-all-h3-cc: Tie in CPU OPPs arm64: dts: allwinner: h5: Add CPU Operating Performance Points table arm64: dts: allwinner: h5: Add trip and cooling maps to CPU thermal zones arm64: dts: allwinner: h5: Add clock to CPU cores ARM: dts: sunxi: bananapi-m2-plus-v1.2: Fix CPU supply voltages ARM: dts: sunxi: bananapi-m2-plus-v1.2: Add regulator supply to all CPU cores ARM: dts: sunxi: libretech-all-h3-cc: Add regulator supply to all CPU cores arm64: dts: sun50i-pinephone: dldo4 must not be >= 1.8V arm64: dts: allwinner: Add support for PinePhone revision 1.2 dt-bindings: arm: sunxi: Add PinePhone 1.2 bindings arm64: dts: sun50i-a64-pinephone: Add touchscreen support arm64: dts: sun50i-a64-pinephone: Enable LCD support on PinePhone ARM: dts: orange-pi-zero-plus2: add leds configuration ARM: dts: orange-pi-zero-plus2: enable USB OTG port Link: https://lore.kernel.org/r/fa48ffcb-3404-41bb-b065-a16717cf5688.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'versatile-for-v5.9' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into arm/dt Versatile DTS changes for the v5.9 kernel cycle, essentially just a single patch fixing up the node names for schema. * tag 'versatile-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM: dts: arm-realview: Align L2 cache-controller nodename with dtschema Link: https://lore.kernel.org/r/CACRpkdbkM9ZmuG2FnBmO7upcJfnqq2oSLDCFDXC5b3K+dtps9Q@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'imx-dt64-5.9' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm64 device tree update for 5.9: - Update i.MX8M OCOTP device node name to match .yaml schema. - Add ftm_alarm0 device support for layerscape SoCs. - Add DSPI controller support for lx2160a device. - A series from Peng Fan to add aliases for various devices on i.MX8 SoCs. - Add Hantro G1/G2 VPU device support for imx8mq. - Add more thermal zone support for ls1028a, ls1043a and ls1046a. - Other small random changes. * tag 'imx-dt64-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (26 commits) arm64: dts: lx2160a-rdb: fix shunt-resistor value arm64: dts: ls1028a-qds: Add DSPI flash nodes arm64: dts: lx2160a: Increase configuration space size arm64: dts: zii-ultra: update MDIO speed and preamble arm64: dts: ls1043a: update USB nodes status to match board config arm64: dts: imx8mn-evk: add pca9450 for i.mx8mn-evk board arm64: dts: imx8mp: add ddr pmu device node arm64: dts: ls1043a: add more thermal zone support arm64: dts: ls1046a: add more thermal zone support arm64: dts: layerscape: add ftm_alarm0 node arm64: dts: ls1028a: Add ftm_alarm0 DT node arm64: dts: lx2160a: add ftm_alarm0 DT node arm64: dts: lx2160a: add DT node for all DSPI controller arm64: dts: lx2160a: add dspi controller DT nodes arm64: dts: imx8mp: Add fallback compatible to ocotp node arm64: dts: imx8qxp: Add ethernet alias arm64: dts: imx8qxp: add i2c aliases arm64: dts: imx8qxp: add alias for lsio MU arm64: dts: imx8m: add mu node arm64: dts: imx8m: change ocotp node name on i.MX8M SoCs ... Link: https://lore.kernel.org/r/20200720085536.24138-4-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'imx-dt-5.9' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX device tree update for 5.9: - New board support: Protonic PRTI6Q/WD2/VT7/RVT and MYiR MYS-6ULX SBC. - Update IIM, OCOTP and SD/MMC device node name to match .yaml bindings. - Make tempmon node as child of anatop node according to hardware architecture. - The vf610-zii device update: configure fiber port to 1000BaseX, add switch watchdog, MDIO speed and preamble. - A series from Fabio Estevam to update imx6qdl-sabresd and imx6q-tbs2910 for using MDIO node and reset-assert-us. - Align L2 cache-controller device node name with .yaml schema. - Enable SATA support for imx6qp-sabreauto and imx6qp-sabresd board. - A series of patches from Shengjiu Wang to enable various audio support on i.MX6 devices. - Add Gateworks System Controller support for imx6qdl-gw devices. - Change default #pwm-cells setting to <3> in the SoC dtsi files. - Other small random changes. * tag 'imx-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (43 commits) ARM: dts: vf610-zii-ssmb-spu3: Add node for switch watchdog ARM: dts: vf610-zii-ssmb-dtu: Add no-sdio/no-sd properties ARM: dts: imx6q-tbs2910: Pass reset-assert-us ARM: dts: imx6q-tbs2910: Add an mdio node ARM: dts: imx6qdl-sabresd: Pass reset-assert-us ARM: dts: imx6qdl-sabresd: Add an mdio node ARM: dts: imx6qdl-gw: add Gateworks System Controller support ARM: dts: imx6ull: add MYiR MYS-6ULX SBC ARM: dts: vf610-zii-spb4: Add node for switch watchdog ARM: dts: colibri-imx6: remove pinctrl-names orphan ARM: dts: imx: default to #pwm-cells = <3> in the SoC dtsi files ARM: dts: vf610-zii-scu4-aib: Configure fibre ports to 1000BaseX ARM: dts: vf610-zii-dev-rev-c: Configure fiber port to 1000BaseX ARM: dts: ZII: update MDIO speed and preamble ARM: dts: vfxxx: Add node for CAAM ARM: dts: imx6qp-sabresd: enable sata ARM: dts: imx6qp-sabreauto: enable sata ARM: dts: add Protonic RVT board ARM: dts: add Protonic VT7 board ARM: dts: add Protonic WD2 board ... Link: https://lore.kernel.org/r/20200720085536.24138-3-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'socfpga_dts_update_for_v5.9' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA DTS updates for v5.9 - Populate clock entries for Agilex platform - Add "reset-names" to SPI entries - Add Maxim max1619 temperature sensor to Arria10 devkit * tag 'socfpga_dts_update_for_v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: dts: socfpga: add the temperature sensor to the Arria10 devkit arm: dts: socfpga: add reset-names to spi node arm64: dts: agilex: add nand clocks arm64: dts: agilex: populate clock dts entries for Intel SoCFPGA Agilex Link: https://lore.kernel.org/r/20200719011804.15599-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'imx-fixes-5.8-3' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.8, round 3: - A couple of FEC2 phy-mode fixes on imx6sx-sabreauto and imx6sx-sdb board. - One fix on imx6qdl-icore pin muxing to get USB OTG_ID and SD card detect work correctly. * tag 'imx-fixes-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6qdl-icore: Fix OTG_ID pin and sdcard detect ARM: dts: imx6sx-sabreauto: Fix the phy-mode on fec2 ARM: dts: imx6sx-sdb: Fix the phy-mode on fec2 Link: https://lore.kernel.org/r/20200720040148.GA20462@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'sunxi-fixes-for-5.8-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Two fixes for the Allwinner SoCs, one to relax the CMA allocation ranges that were failing on older SoCs and one to fix Cedrus on the H6. * tag 'sunxi-fixes-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h6: Fix Cedrus IOMMU usage ARM: dts sunxi: Relax a bit the CMA pool allocation range Link: https://lore.kernel.org/r/e24f0608-6a4f-4163-b99e-a5f48e796184.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'imx-defconfig-5.9' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig i.MX defconfig update for 5.9: - Enable PCA9450 regulator driver in arm64 defconfig. - Enable RV8803 RTC and FSL_SAI audio support in arm64 defconfig to make it useful for Kontron sl28 boards. - Enable i.MX8MM clock and pinctrl driver in imx_v6_v7_defconfig to get AARCH32 mode kernel work on AARCH64 hardware. * tag 'imx-defconfig-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx_v6_v7_defconfig: Support i.MX8MM arm64: defconfig: enable RTC and audio support on Kontron sl28 boards arm64: defconfig: add pca9450 pmic driver Link: https://lore.kernel.org/r/20200720085536.24138-5-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'qcom-arm64-defconfig-for-5.9' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig Qualcomm ARM64 defconfig updates for v5.9 Enable the Qualcomm RPM power-domain, RTC and IPCC drivers, the SDM845 video clock controller driver and the SM8250 TLMM pinctrl driver. * tag 'qcom-arm64-defconfig-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: defconfig: Enable Qualcomm IPCC driver arm64: defconfig: Enable Qualcomm SM8250 pinctrl driver arm64: defconfig: Add CONFIG_QCOM_RPMPD arm64: defconfig: Enable the PM8xxx RTC driver arm64: defconfig: Enable SDM845 video clock controller Link: https://lore.kernel.org/r/20200721044848.3429874-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-07-21 The following pull-request contains BPF updates for your *net-next* tree. We've added 46 non-merge commits during the last 6 day(s) which contain a total of 68 files changed, 4929 insertions(+), 526 deletions(-). The main changes are: 1) Run BPF program on socket lookup, from Jakub. 2) Introduce cpumap, from Lorenzo. 3) s390 JIT fixes, from Ilya. 4) teach riscv JIT to emit compressed insns, from Luke. 5) use build time computed BTF ids in bpf iter, from Yonghong. ==================== Purely independent overlapping changes in both filter.h and xdp.h Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22arm64: dts: rockchip: Add PCIe for RockPI N10Jagan Teki
This patch adds support to enable PCIe for RockPI N10. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20200720110230.367985-3-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-07-22ARM: dts: rockchip: Add HDMI out for RockPI N8/N10Jagan Teki
This patch adds support to enable HDMI out for N10 and N8 combinations SBCs. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Link: https://lore.kernel.org/r/20200720110230.367985-2-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-07-22ARM: dts: rockchip: Add USB for RockPI N8/N10Jagan Teki
Radxa dalang carrier board has 2x USB 2.0 and 1x USB 3.0 ports. This patch adds support to enable all these USB ports for N10 and N8 combinations SBCs. Note that the USB 3.0 port on RockPI N8 combination works as USB 2.0 OTG since it is driven from RK3288. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20200720110230.367985-1-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-07-22ARM: dts: rockchip: Add usb host0 ohci node for rk3288Jagan Teki
rk3288 and rk3288w have a usb host0 ohci controller. Although rk3288 ohci doesn't actually work on hardware, but rk3288w ohci can work well. So add usb host0 ohci node in rk3288 dtsi and boards can then enable it if supported. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Cc: William Wu <william.wu@rock-chips.com> Link: https://lore.kernel.org/r/20200720105846.367776-1-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-07-22Merge tag 'media/v5.8-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media into master Pull media fixes from Mauro Carvalho Chehab: "A series of fixes for the upcoming atomisp driver. They solve issues when probing atomisp on devices with multiple cameras and get rid of warnings when built with W=1. The diffstat is a bit long, as this driver has several abstractions. The patches that solved the issues with W=1 had to get rid of some duplicated code (there used to have 2 versions of the same code, one for ISP2401 and another one for ISP2400). As this driver is not in 5.7, such changes won't cause regressions" * tag 'media/v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (38 commits) Revert "media: atomisp: keep the ISP powered on when setting it" media: atomisp: fix mask and shift operation on ISPSSPM0 media: atomisp: move system_local consts into a C file media: atomisp: get rid of version-specific system_local.h media: atomisp: move global stuff into a common header media: atomisp: remove non-used 32-bits consts at system_local media: atomisp: get rid of some unused static vars media: atomisp: Fix error code in ov5693_probe() media: atomisp: Replace trace_printk by pr_info media: atomisp: Fix __func__ style warnings media: atomisp: fix help message for ISP2401 selection media: atomisp: i2c: atomisp-ov2680.c: fixed a brace coding style issue. media: atomisp: make const arrays static, makes object smaller media: atomisp: Clean up non-existing folders from Makefile media: atomisp: Get rid of ACPI specifics in gmin_subdev_add() media: atomisp: Provide Gmin subdev as parameter to gmin_subdev_add() media: atomisp: Use temporary variable for device in gmin_subdev_add() media: atomisp: Refactor PMIC detection to a separate function media: atomisp: Deduplicate return ret in gmin_i2c_write() media: atomisp: Make pointer to PMIC client global ...
2020-07-22s390/time: improve comparison for tod steeringHeiko Carstens
It doesn't make sense to add zero shifted by 15. It's still zero. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-22s390/time: select CLOCKSOURCE_VALIDATE_LAST_CYCLEHeiko Carstens
The value returned by read_tod_clock() will overflow on September 17th 2042. To avoid that system time jumps back select CLOCKSOURCE_VALIDATE_LAST_CYCLE which enables a sanity check in order to prevent negative "delta" values. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-22s390/time: use CLOCKSOURCE_MASKHeiko Carstens
Make use of CLOCKSOURCE_MASK instead of open-coding it. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-22powerpc/64s: system call support for scv/rfscv instructionsNicholas Piggin
Add support for the scv instruction on POWER9 and later CPUs. For now this implements the zeroth scv vector 'scv 0', as identical to 'sc' system calls, with the exception that LR is not preserved, nor are volatile CR registers, and error is not indicated with CR0[SO], but by returning a negative errno. rfscv is implemented to return from scv type system calls. It can not be used to return from sc system calls because those are defined to preserve LR. getpid syscall throughput on POWER9 is improved by 26% (428 to 318 cycles), largely due to reducing mtmsr and mtspr. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Fix ppc64e build] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200611081203.995112-3-npiggin@gmail.com
2020-07-22powerpc/64s/exception: treat NIA below __end_interrupts as soft-maskedNicholas Piggin
The scv instruction causes an interrupt which can enter the kernel with MSR[EE]=1, thus allowing interrupts to hit at any time. These must not be taken as normal interrupts, because they come from MSR[PR]=0 context, and yet the kernel stack is not yet set up and r13 is not set to the PACA). Treat this as a soft-masked interrupt regardless of the soft masked state. This does not affect behaviour yet, because currently all interrupts are taken with MSR[EE]=0. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200611081203.995112-2-npiggin@gmail.com
2020-07-22arm64: s/AMEVTYPE/AMEVTYPERVladimir Murzin
Activity Monitor Event Type Registers are named as AMEVTYPER{0,1}<n> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20200721091259.102756-1-vladimir.murzin@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-07-22powerpc/perf: BHRB control to disable BHRB logic when not usedAthira Rajeev
PowerISA v3.1 has few updates for the Branch History Rolling Buffer(BHRB). BHRB disable is controlled via Monitor Mode Control Register A (MMCRA) bit, namely "BHRB Recording Disable (BHRBRD)". This field controls whether BHRB entries are written when BHRB recording is enabled by other bits. This patch implements support for this BHRB disable bit. By setting 0b1 to this bit will disable the BHRB and by setting 0b0 to this bit will have BHRB enabled. This addresses backward compatibility (for older OS), since this bit will be cleared and hardware will be writing to BHRB by default. This patch addresses changes to set MMCRA (BHRBRD) at boot for power10 (there by the core will run faster) and enable this feature only on runtime ie, on explicit need from user. Also save/restore MMCRA in the restore path of state-loss idle state to make sure we keep BHRB disabled if it was not enabled on request at runtime. Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1594996707-3727-12-git-send-email-atrajeev@linux.vnet.ibm.com
2020-07-22powerpc/perf: Add Power10 BHRB filter support for ↵Athira Rajeev
PERF_SAMPLE_BRANCH_IND_CALL/COND PowerISA v3.1 introduce filtering support for PERF_SAMPLE_BRANCH_IND_CALL/COND. The patch adds BHRB filter support for "ind_call" and "cond" in power10_bhrb_filter_map(). Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1594996707-3727-11-git-send-email-atrajeev@linux.vnet.ibm.com
generated by cgit (git 2.34.1) at 2025-09-16 05:01:04 +0000