summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2019-07-02KVM: nVMX: list VMX MSRs in KVM_GET_MSR_INDEX_LISTPaolo Bonzini
This allows userspace to know which MSRs are supported by the hypervisor. Unfortunately userspace must resort to tricks for everything except MSR_IA32_VMX_VMFUNC (which was just added in the previous patch). One possibility is to use the feature control MSR, which is tied to nested VMX as well and is present on all KVM versions that support feature MSRs. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-02KVM: nVMX: allow setting the VMFUNC controls MSRPaolo Bonzini
Allow userspace to set a custom value for the VMFUNC controls MSR, as long as the capabilities it advertises do not exceed those of the host. Fixes: 27c42a1bb ("KVM: nVMX: Enable VMFUNC for the L1 hypervisor", 2017-08-03) Reviewed-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-02KVM: nVMX: include conditional controls in /dev/kvm KVM_GET_MSRSPaolo Bonzini
Some secondary controls are automatically enabled/disabled based on the CPUID values that are set for the guest. However, they are still available at a global level and therefore should be present when KVM_GET_MSRS is sent to /dev/kvm. Fixes: 1389309c811 ("KVM: nVMX: expose VMX capabilities for nested hypervisors to userspace", 2018-02-26) Reviewed-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-02ARM: davinci: da830-evm: fix GPIO lookup for OHCIBartosz Golaszewski
The fixed regulator driver doesn't specify any con_id for gpio lookup so it must be NULL in the table entry. Fixes: 274e4c336192 ("ARM: davinci: da830-evm: add a fixed regulator for ohci-da8xx") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-07-02ARM: davinci: omapl138-hawk: add missing regulator constraints for OHCIBartosz Golaszewski
We need to enable status changes for the fixed power supply for the USB controller. Fixes: 1d272894ec4f ("ARM: davinci: omapl138-hawk: add a fixed regulator for ohci-da8xx") Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-07-02ARM: davinci: da830-evm: add missing regulator constraints for OHCIBartosz Golaszewski
We need to enable status changes for the fixed power supply for the USB controller. Fixes: 274e4c336192 ("ARM: davinci: da830-evm: add a fixed regulator for ohci-da8xx") Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-07-02s390: ap: kvm: Enable PQAP/AQIC facility for the guestPierre Morel
AP Queue Interruption Control (AQIC) facility gives the guest the possibility to control interruption for the Cryptographic Adjunct Processor queues. Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com> Acked-by: Harald Freudenberger <freude@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Halil Pasic <pasic@linux.ibm.com> [ Modified while picking: we may not expose STFLE facility 65 unconditionally because AIV is a pre-requirement.] Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-02s390: ap: kvm: add PQAP interception for AQICPierre Morel
We prepare the interception of the PQAP/AQIC instruction for the case the AQIC facility is enabled in the guest. First of all we do not want to change existing behavior when intercepting AP instructions without the SIE allowing the guest to use AP instructions. In this patch we only handle the AQIC interception allowed by facility 65 which will be enabled when the complete interception infrastructure will be present. We add a callback inside the KVM arch structure for s390 for a VFIO driver to handle a specific response to the PQAP instruction with the AQIC command and only this command. But we want to be able to return a correct answer to the guest even there is no VFIO AP driver in the kernel. Therefor, we inject the correct exceptions from inside KVM for the case the callback is not initialized, which happens when the vfio_ap driver is not loaded. We do consider the responsibility of the driver to always initialize the PQAP callback if it defines queues by initializing the CRYCB for a guest. If the callback has been setup we call it. If not we setup an answer considering that no queue is available for the guest when no callback has been setup. Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com> Acked-by: Harald Freudenberger <freude@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-02s390/unwind: cleanup unused READ_ONCE_TASK_STACKVasily Gorbik
Kasan instrumentation of backchain unwinder stack reads is disabled completely and simply uses READ_ONCE_NOCHECK now. READ_ONCE_TASK_STACK macro is unused and could be removed. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-02s390/kasan: avoid false positives during stack unwindVasily Gorbik
Avoid kasan false positive when current task is interrupted in-between stack frame allocation and backchain write instructions leaving new stack frame backchain invalid. In particular if backchain is 0 the unwinder tries to read pt_regs from the stack and might hit kasan poisoned bytes, leading to kasan "stack-out-of-bounds" report. Disable kasan instrumentation of unwinder stack reads, since this limitation couldn't be handled otherwise with current backchain unwinder implementation. Fixes: 78c98f907413 ("s390/unwind: introduce stack unwind API") Reported-by: Julian Wiedmann <jwi@linux.ibm.com> Tested-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-02powerpc/64s/exception: remove bad stack branchNicholas Piggin
The bad stack test in interrupt handlers has a few problems. For performance it is taken in the common case, which is a fetch bubble and a waste of i-cache. For code development and maintainence, it requires yet another stack frame setup routine, and that constrains all exception handlers to follow the same register save pattern which inhibits future optimisation. Remove the test/branch and replace it with a trap. Teach the program check handler to use the emergency stack for this case. This does not result in quite so nice a message, however the SRR0 and SRR1 of the crashed interrupt can be seen in r11 and r12, as is the original r1 (adjusted by INT_FRAME_SIZE). These are the most important parts to debugging the issue. The original r9-12 and cr0 is lost, which is the main downside. kernel BUG at linux/arch/powerpc/kernel/exceptions-64s.S:847! Oops: Exception in kernel mode, sig: 5 [#1] BE SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted NIP: c000000000009108 LR: c000000000cadbcc CTR: c0000000000090f0 REGS: c0000000fffcbd70 TRAP: 0700 Not tainted MSR: 9000000000021032 <SF,HV,ME,IR,DR,RI> CR: 28222448 XER: 20040000 CFAR: c000000000009100 IRQMASK: 0 GPR00: 000000000000003d fffffffffffffd00 c0000000018cfb00 c0000000f02b3166 GPR04: fffffffffffffffd 0000000000000007 fffffffffffffffb 0000000000000030 GPR08: 0000000000000037 0000000028222448 0000000000000000 c000000000ca8de0 GPR12: 9000000002009032 c000000001ae0000 c000000000010a00 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: c0000000f00322c0 c000000000f85200 0000000000000004 ffffffffffffffff GPR24: fffffffffffffffe 0000000000000000 0000000000000000 000000000000000a GPR28: 0000000000000000 0000000000000000 c0000000f02b391c c0000000f02b3167 NIP [c000000000009108] decrementer_common+0x18/0x160 LR [c000000000cadbcc] .vsnprintf+0x3ec/0x4f0 Call Trace: Instruction dump: 996d098a 994d098b 38610070 480246ed 48005518 60000000 38200000 718a4000 7c2a0b78 3821fd00 41c20008 e82d0970 <0981fd00> f92101a0 f9610170 f9810178 Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/tm: update comment about interrupt re-entrancyNicholas Piggin
Since the system reset interrupt began to use its own stack, and machine check interrupts have done so for some time, r1 can be changed without clearing MSR[RI], provided no other interrupts (including SLB misses) are taken. MSR[RI] does have to be cleared when using SCRATCH0, however. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: move SET_SCRATCH0 into EXCEPTION_PROLOG_0Nicholas Piggin
No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: denorm handler use standard scratch save macroNicholas Piggin
Although the 0x1500 interrupt only applies to bare metal, it is better to just use the standard macro for scratch save. Runtime code path remains unchanged (due to instruction patching). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: machine check use standard macros to save dar/dsisrNicholas Piggin
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: add dar and dsisr options to exception macroNicholas Piggin
Some exception entry requires DAR and/or DSISR to be saved into the paca exception save area. Add options to the standard exception macros for these. Generated code changes slightly due to code structure. - 554: a6 02 72 7d mfdsisr r11 - 558: a8 00 4d f9 std r10,168(r13) - 55c: b0 00 6d 91 stw r11,176(r13) + 554: a8 00 4d f9 std r10,168(r13) + 558: a6 02 52 7d mfdsisr r10 + 55c: b0 00 4d 91 stw r10,176(r13) Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: use common macro for windupNicholas Piggin
No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: shuffle windup code aroundNicholas Piggin
Restore all SPRs and CR up-front, these are longer latency instructions. Move register restore around to maximise pairs of adjacent loads (e.g., restore r0 next to r1). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: simplify hmi windup codeNicholas Piggin
Duplicate the hmi windup code for both cases, rather than to put a special case branch in the middle of it. Remove unused label. This helps with later code consolidation. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: move machine check windup in_mce handlingNicholas Piggin
Move in_mce decrement earlier before registers are restored (but still after RI=0). This helps with later consolidation. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: windup use r9 consistently to restore SPRsNicholas Piggin
Trivial code change, r3->r9. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: mtmsrd L=1 cleanupNicholas Piggin
All supported 64s CPUs support mtmsrd L=1 instruction, so a cleanup can be made in sreset and mce handlers. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: avoid SPR RAW scoreboard stall in real mode entryNicholas Piggin
Move SPR reads ahead of writes. Real mode entry that is not a KVM guest is rare these days, but bad practice propagates. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: clean up system call entryNicholas Piggin
syscall / hcall entry unnecessarily differs between KVM and non-KVM builds. Move the SMT priority instruction to the same location (after INTERRUPT_TO_KERNEL). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: move paca save area offsets into exception-64s.SNicholas Piggin
No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: remove pointless EXCEPTION_PROLOG macro indirectionNicholas Piggin
No generated code change. Final vmlinux is changed only due to change in bug table line numbers. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: generate regs clear instructions using .reptNicholas Piggin
No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: fix indenting irregularitiesNicholas Piggin
Generally, macros that result in instructions being expanded are indented by a tab, and those that don't have no indent. Fix the obvious cases that go contrary to style. No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: use a gas macro for system call handler codeNicholas Piggin
No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: remove unused BRANCH_TO_COMMONNicholas Piggin
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: remove __BRANCH_TO_KVMNicholas Piggin
No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: move head-64.h code to exception-64s.S where it is usedNicholas Piggin
No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: move exception-64s.h code to exception-64s.S where it ↵Nicholas Piggin
is used No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: move KVM related code togetherNicholas Piggin
No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: remove STD_EXCEPTION_COMMON variantsNicholas Piggin
These are only called in one place each. No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: move EXCEPTION_PROLOG_2* to a more logical placeNicholas Piggin
No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: improve 0x500 handler codeNicholas Piggin
After the previous cleanup, it becomes possible to consolidate some common code outside the runtime alternate patching. Also remove unused labels. This results in some code change, but unchanged runtime instruction sequence. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: unwind exception-64s.h macrosNicholas Piggin
Many of these macros just specify 1-4 lines which are only called a few times each at most, and often just once. Remove this indirection. No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: Move EXCEPTION_COMMON additions into callersNicholas Piggin
More cases of code insertion via macros that does not add a great deal. All the additions have to be specified in the macro arguments, so they can just as well go after the macro. No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: Move EXCEPTION_COMMON handler and return branches ↵Nicholas Piggin
into callers The aim is to reduce the amount of indirection it takes to get through the exception handler macros, particularly where it provides little code sharing. No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: Make EXCEPTION_PROLOG_0 a gas macro for consistency ↵Nicholas Piggin
with others No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: KVM handler can set the HSRR trap bitNicholas Piggin
Move the KVM trap HSRR bit into the KVM handler, which can be conditionally applied when hsrr parameter is set. No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: merge KVM handler and skip variantsNicholas Piggin
Conditionally expand the skip case if it is specified. No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: consolidate maskable and non-maskable prologsNicholas Piggin
Conditionally expand the soft-masking test if a mask is passed in. No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: remove the "extra" macro parameterNicholas Piggin
Rather than pass in the soft-masking and KVM tests via macro that is passed to another macro to expand it, switch to usig gas macros and conditionally expand the soft-masking and KVM tests. The system reset with its idle test is open coded as it is a one-off. No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: fix sreset KVM test codeNicholas Piggin
The sreset handler KVM test theoretically should not depend on P7. In practice KVM now only supports P7 and up so no real bug fix, but this change is made now so the quirk is not propagated through cleanup patches. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: move and tidy EXCEPTION_PROLOG_2 variantsNicholas Piggin
- Re-name the macros to _REAL and _VIRT suffixes rather than no and _RELON suffix. - Move the macro definitions together in the file. - Move RELOCATABLE ifdef inside the _VIRT macro. Further consolidation between variants does not buy much here. No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: consolidate EXCEPTION_PROLOG_2 with _NORI variantNicholas Piggin
Switch to a gas macro that conditionally expands the RI clearing instruction. No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: remove H concatenation for EXC_HV variantsNicholas Piggin
Replace all instances of this with gas macros that test the hsrr parameter and use the appropriate register names / labels. No generated code change. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Remove extraneous 2nd check for 0xea0 in SOFTEN_TEST] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02powerpc/64s/exception: Remove unused SOFTEN_VALUE_0x980Michael Ellerman
Remove SOFTEN_VALUE_0x980, it's been unused since commit dabe859ec636 ("powerpc: Give hypervisor decrementer interrupts their own handler") (Sep 2012). Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit (git 2.34.1) at 2025-09-29 19:12:01 +0000