| Age | Commit message (Collapse) | Author |
|---|
|
Force __builtin_constant_p to evaluate whether the argument to atomic_add
& atomic_sub is constant in the front-end before optimisations which
can lead GCC to output a call to __bad_increment_for_ia64_fetch_and_add().
See GCC bugzilla 83653.
Signed-off-by: Jakub Jelinek <jakub@redhat.com>
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull networking fixes from David Miller:
1) Fix BPF divides by zero, from Eric Dumazet and Alexei Starovoitov.
2) Reject stores into bpf context via st and xadd, from Daniel
Borkmann.
3) Fix a memory leak in TUN, from Cong Wang.
4) Disable RX aggregation on a specific troublesome configuration of
r8152 in a Dell TB16b dock.
5) Fix sw_ctx leak in tls, from Sabrina Dubroca.
6) Fix program replacement in cls_bpf, from Daniel Borkmann.
7) Fix uninitialized station_info structures in cfg80211, from Johannes
Berg.
8) Fix miscalculation of transport header offset field in flow
dissector, from Eric Dumazet.
9) Fix LPM tree leak on failure in mlxsw driver, from Ido Schimmel.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (29 commits)
ibmvnic: Fix IPv6 packet descriptors
ibmvnic: Fix IP offload control buffer
ipv6: don't let tb6_root node share routes with other node
ip6_gre: init dev->mtu and dev->hard_header_len correctly
mlxsw: spectrum_router: Free LPM tree upon failure
flow_dissector: properly cap thoff field
fm10k: mark PM functions as __maybe_unused
cfg80211: fix station info handling bugs
netlink: reset extack earlier in netlink_rcv_skb
can: af_can: canfd_rcv(): replace WARN_ONCE by pr_warn_once
can: af_can: can_rcv(): replace WARN_ONCE by pr_warn_once
bpf: mark dst unknown on inconsistent {s, u}bounds adjustments
bpf: fix cls_bpf on filter replace
Net: ethernet: ti: netcp: Fix inbound ping crash if MTU size is greater than 1500
tls: reset crypto_info when do_tls_setsockopt_tx fails
tls: return -EBUSY if crypto_info is already set
tls: fix sw_ctx leak
net/tls: Only attach to sockets in ESTABLISHED state
net: fs_enet: do not call phy_stop() in interrupts
r8152: disable RX aggregation on Dell TB16 dock
...
|
|
This adds support for volume up/down keys in the dts.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The generated assembler for the C fill RSB inline asm operations has
several issues:
- The C code sets up the loop register, which is then immediately
overwritten in __FILL_RETURN_BUFFER with the same value again.
- The C code also passes in the iteration count in another register, which
is not used at all.
Remove these two unnecessary operations. Just rely on the single constant
passed to the macro for the iterations.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: dave.hansen@intel.com
Cc: gregkh@linuxfoundation.org
Cc: torvalds@linux-foundation.org
Cc: arjan@linux.intel.com
Link: https://lkml.kernel.org/r/20180117225328.15414-1-andi@firstfloor.org
|
|
Since indirect jump instructions will be replaced by jump
to __x86_indirect_thunk_*, those jmp instruction must be
treated as an indirect jump. Since optprobe prohibits to
optimize probes in the function which uses an indirect jump,
it also needs to find out the function which jump to
__x86_indirect_thunk_* and disable optimization.
Add a check that the jump target address is between the
__indirect_thunk_start/end when optimizing kprobe.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/151629212062.10241.6991266100233002273.stgit@devbox
|
|
Mark __x86_indirect_thunk_* functions as blacklist for kprobes
because those functions can be called from anywhere in the kernel
including blacklist functions of kprobes.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/151629209111.10241.5444852823378068683.stgit@devbox
|
|
Introduce start/end markers of __x86_indirect_thunk_* functions.
To make it easy, consolidate .text.__x86.indirect_thunk.* sections
to one .text.__x86.indirect_thunk section and put it in the
end of kernel text section and adds __indirect_thunk_start/end
so that other subsystem (e.g. kprobes) can identify it.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/151629206178.10241.6828804696410044771.stgit@devbox
|
|
The machine check idtentry uses an indirect branch directly from the low
level code. This evades the speculation protection.
Replace it by a direct call into C code and issue the indirect call there
so the compiler can apply the proper speculation protection.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by:Borislav Petkov <bp@alien8.de>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Niced-by: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801181626290.1847@nanos
|
|
The clcd device is lacking an interrupt-parent property, which makes
the interrupt unusable and shows up as a warning with the latest
dtc version:
arch/arm/boot/dts/ste-nomadik-s8815.dtb: Warning (interrupts_property): Missing interrupt-parent for /amba/clcd@10120000
arch/arm/boot/dts/ste-nomadik-nhk15.dtb: Warning (interrupts_property): Missing interrupt-parent for /amba/clcd@10120000
I looked up the old board files and found that this interrupt has
the same irqchip as all the other on-chip device, it just needs one
extra line.
Fixes: 17470b7da11c ("ARM: dts: add the CLCD LCD display to the NHK15")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt
Pull "DTS changes to enable Ethernet on the Gemini boards" from Linus Walleij:
I realize it's late. Like really late. But Dmiller merged the ethernet
bindings and the driver for Gemini ethernet, and Gemini is all about
networking.
So for a late merge consideration here are the two patches giving
ethernet on Gemini, on top of what is already merged.
* tag 'gemini-dts-update-3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: Add ethernet to a bunch of platforms
ARM: dts: Add ethernet to the Gemini SoC
|
|
next/dt
Pull "mvebu dt64 for 4.16 (part 3)" from Gregory CLEMENT:
Fix for the CP110 dt de-duplication series
* tag 'mvebu-dt64-4.16-3' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: armada-80x0: Fix pinctrl compatible string
|
|
The DRM driver most notably, but also out of tree drivers (for now) like
the VPU or GPU drivers, are quite big consumers of large, contiguous memory
buffers. However, the sunxi_defconfig doesn't enable CMA in order to
mitigate that, which makes them almost unusable.
Enable it to make sure it somewhat works.
Cc: <stable@vger.kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Enable APEI EINJ for ARM64 to support the error injection.
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Acked-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Enable CONFIG_EDAC_GHES option for ARM64,so that the memory errors
are processed and reported to the user space.
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Acked-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Enable ACPI APEI MEMORY FAILURE option for ARM64,
so that memory errors will be handled.
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Acked-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
When booting a kernel without 52-bit PA support (e.g. a kernel with 4k
pages) on a system with 52-bit memory, the kernel will currently try to
use the 52-bit memory and crash. Fix this by ignoring any memory higher
than what the kernel supports.
Fixes: f77d281713d4 ("arm64: enable 52-bit physical address support")
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The POWER9 core supports a new feature: ASB_Notify which requires the
support of the Special Purpose Register: TIDR.
The ASB_Notify command, generated by the AFU, will attempt to
wake-up the host thread identified by the particular LPID:PID:TID.
This patch assign a unique TIDR (thread id) for the current thread which
will be used in the process element entry.
Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com>
Reviewed-by: Philippe Bergheaud <felix@linux.vnet.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Change the data type for the variable 'ncpu' in ppc_core_imc_cpu_offline(),
since cpumask_any_but() returns an 'int' value.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
In memory Collection (IMC) counter pmu driver controls the ucode's
execution state. At the system boot, IMC perf driver pause the ucode.
Ucode state is changed to "running" only when any of the nest units
are monitored or profiled using perf tool.
Nest units support only limited set of hardware counters and ucode is
always programmed in the "production mode" ("accumulation") mode. This
mode is configured to provide key performance metric data for most of
the nest units.
But ucode also supports other modes which would be used for "debug" to
drill down specific nest units. That is, ucode when switched to
"powerbus" debug mode (for example), will dynamically reconfigure the
nest counters to target only "powerbus" related events in the hardware
counters. This allows the IMC nest unit to focus on powerbus related
transactions in the system in more detail. At this point, production
mode events may or may not be counted.
IMC nest counters has both in-band (ucode access) and out of band
access to it. Since not all nest counter configurations are supported
by ucode, out of band tools are used to characterize other nest
counter configurations.
Patch provides an interface via "debugfs" to enable the switching of
ucode modes in the system. To switch ucode mode, one has to first
pause the microcode (imc_cmd), and then write the target mode value to
the "imc_mode" file.
Proposed Approach:
In the proposed approach, the function (export_imc_mode_and_cmd) which
creates the debugfs interface for imc mode and command is implemented
in opal-imc.c. Thus we can use imc_get_mem_addr() to get the homer
base address for each chip.
The interface to expose imc mode and command is required only if we
have nest pmu units registered. Employing the existing data structures
to track whether we have any nest units registered will require to
extend data from perf side to opal-imc.c. Instead an integer is
introduced to hold that information by counting successful nest unit
registration. Debugfs interface is removed based on the integer count.
Example for the interface:
$ ls /sys/kernel/debug/imc
imc_cmd_0 imc_cmd_8 imc_mode_0 imc_mode_8
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Remove the allocation of struct imc_events from imc_parse_event().
Instead pass imc_events as a parameter to imc_parse_event(), which is
a pointer to a slot in the array allocated in
update_events_in_group().
Reported-by: Dan Carpenter ("powerpc/perf: Fix a sizeof() typo so we allocate less memory")
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Factor out memory freeing part for attribute elements from
imc_common_cpuhp_mem_free().
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Remove the global variable 'thread_imc_pmu', since it is not used in the code.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
local_t is used for atomic modifications for per-CPU data, versus
re-entrant modifications via interrupts.
local_t read-modify-write atomic operations are currently implemented
with hardware atomics (larx/stcx), which are quite slow. This patch
implements them by masking all types of interrupts that may do local_t
operations ("standard" and perf interrupts).
Rusty's benchmark (https://lkml.org/lkml/2008/12/16/450) gives the
following timings for the local_t test, in nanoseconds per iteration:
larx/stcx irq+pmu disable
_inc 38 10
_add 38 10
_read 4 4
_add_return 38 10
There are still some interrupt types (system reset, machine check, and
watchdog), which can not safely use local_t operations, because they
are not masked.
An alternative approach was proposed, using a CR bit to mark a critical
section, which is tested in the interrupt return path, and would then
branch to a fixup handler (similar to exception fixups), which re-starts
the operation. The problem with this was the complexity of the fixup
handler and the latency of the slow path.
https://lists.ozlabs.org/pipermail/linuxppc-dev/2014-November/123024.html
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
powerpc implements local_t with atomic operations. There is already
an asm-generic implementation which does this using atomic_t.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
To support soft-masking of the performance monitor interrupt, a set of
new powerpc_local_irq_pmu_save() and powerpc_local_irq_restore()
functions are added. And powerpc_local_irq_save() implemented, by
adding a new irq_soft_mask manipulation function
irq_soft_mask_or_return().
Local_irq_pmu_* macros are provided to access these
powerpc_local_irq_pmu* functions which includes
trace_hardirqs_on|off() to match what we have in
include/linux/irqflags.h.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
New Kconfig is added "CONFIG_PPC_IRQ_SOFT_MASK_DEBUG" to add WARN_ON
to alert the invalid transitions. Also moved the code under the
CONFIG_TRACE_IRQFLAGS in arch_local_irq_restore() to new Kconfig.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
[mpe: Fix name of CONFIG option in change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Two new bit mask field "IRQ_DISABLE_MASK_PMU" is introduced to support
the masking of PMI and "IRQ_DISABLE_MASK_ALL" to aid interrupt masking
checking.
Couple of new irq #defs "PACA_IRQ_PMI" and "SOFTEN_VALUE_0xf0*" added
to use in the exception code to check for PMI interrupts.
In the masked_interrupt handler, for PMIs we reset the MSR[EE] and
return. In the __check_irq_replay(), replay the PMI interrupt by
calling performance_monitor_common handler.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
To support addition of "bitmask" to MASKABLE_* macros, factor out the
EXCPETION_PROLOG_1 macro.
Make it explicit the interrupt masking supported by a gievn interrupt
handler. Patch correspondingly extends the MASKABLE_* macros with an
addition's parameter. "bitmask" parameter is passed to SOFTEN_TEST
macro to decide on masking the interrupt.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Currently we use both EXCEPTION_PROLOG_1 and __EXCEPTION_PROLOG_1 in
the MASKABLE_* macros. As a cleanup, this patch makes MASKABLE_* to
use only __EXCEPTION_PROLOG_1. There is not logic change.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Rename the paca->soft_enabled to paca->irq_soft_mask as it is no
longer used as a flag for interrupt state, but a mask.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
"paca->soft_enabled" is used as a flag to mask some of interrupts.
Currently supported flags values and their details:
soft_enabled MSR[EE]
0 0 Disabled (PMI and HMI not masked)
1 1 Enabled
"paca->soft_enabled" is initialized to 1 to make the interripts as
enabled. arch_local_irq_disable() will toggle the value when
interrupts needs to disbled. At this point, the interrupts are not
actually disabled, instead, interrupt vector has code to check for the
flag and mask it when it occurs. By "mask it", it update interrupt
paca->irq_happened and return. arch_local_irq_restore() is called to
re-enable interrupts, which checks and replays interrupts if any
occured.
Now, as mentioned, current logic doesnot mask "performance monitoring
interrupts" and PMIs are implemented as NMI. But this patchset depends
on local_irq_* for a successful local_* update. Meaning, mask all
possible interrupts during local_* update and replay them after the
update.
So the idea here is to reserve the "paca->soft_enabled" logic. New
values and details:
soft_enabled MSR[EE]
1 0 Disabled (PMI and HMI not masked)
0 1 Enabled
Reason for the this change is to create foundation for a third mask
value "0x2" for "soft_enabled" to add support to mask PMIs. When
->soft_enabled is set to a value "3", PMI interrupts are mask and when
set to a value of "1", PMI are not mask. With this patch also extends
soft_enabled as interrupt disable mask.
Current flags are renamed from IRQ_[EN?DIS}ABLED to
IRQS_ENABLED and IRQS_DISABLED.
Patch also fixes the ptrace call to force the user to see the softe
value to be alway 1. Reason being, even though userspace has no
business knowing about softe, it is part of pt_regs. Like-wise in
signal context.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Minor cleanup to use helper function for manipulating
paca->soft_enabled variable.
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Add a new wrapper function, soft_enabled_set_return(), added to do the
paca->soft_enabled updates requiring a set-return.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Add a new wrapper function, soft_enabled_return(), added to return
paca->soft_enabled value.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Move set_soft_enabled() from powerpc/kernel/irq.c to asm/hw_irq.c, to
encourage updates to paca->soft_enabled done via these access
function. Add "memory" clobber to hint compiler since
paca->soft_enabled memory is the target here.
Renaming it as soft_enabled_set() will make namespaces works better as
prefix than a postfix when new soft_enabled manipulation functions are
introduced.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
In powerpc/64, the arch_local_irq_disable() function returns unsigned
long, which is not consistent with other architectures.
Move that set-return asm implementation into arch_local_irq_save(),
and make arch_local_irq_disable() return void, simplifying the
assembly.
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
arch_local_irq_disable is implemented strangely, with a temporary
output register being set to the desired soft_enabled value via an
immediate input, which is then used to store to memory. This is not
required, the immediate can be specified directly as a register input.
For simple cases at least, assembly is unchanged except register
mapping.
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Two #defines IRQS_ENABLED and IRQS_DISABLED are added to be used when
updating paca->soft_enabled. Replace the hardcoded values used when
updating paca->soft_enabled with IRQ_(EN|DIS)ABLED #define. No logic
change.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
We have always had softe in pt_regs, and accessible via PT_SOFTE, even
though it is not userspace state.
The value userspace sees should always be 1, because we should never
be in userspace with interrupts soft disabled.
In a subsequent patch we will be changing the semantics of the kernel
softe value, so hard wire the value to 1 to retain the existing
semantics. As far as we know nothing ever looks at it, but better safe
than sorry.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
[mpe: Split out of larger patch, write change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The recent changes to TLB handling broke the PS3 build:
arch/powerpc/include/asm/book3s/64/tlbflush.h:30: undefined reference to `.hash__tlbiel_all'
Fix it by adding an fallback version of tlbiel_all() for non-native
builds. It should never be called, due to checks in callers so it
calls BUG(). We should probably clean it up further but this will
suffice for now.
Fixes: d4748276ae14 ("powerpc/64s: Improve local TLB flush for boot and MCE on POWER9")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
ACPI redefines x86_init.pci.init when enabled. Though we still need special
treatment for MID platforms.
Move our specific callback to x86_init.pci.arch_init() and, by calling
acpi_noirq_set(), take back a control over IRQ assignment.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-acpi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180117173409.88136-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This adds a new ioctl, KVM_PPC_GET_CPU_CHAR, that gives userspace
information about the underlying machine's level of vulnerability
to the recently announced vulnerabilities CVE-2017-5715,
CVE-2017-5753 and CVE-2017-5754, and whether the machine provides
instructions to assist software to work around the vulnerabilities.
The ioctl returns two u64 words describing characteristics of the
CPU and required software behaviour respectively, plus two mask
words which indicate which bits have been filled in by the kernel,
for extensibility. The bit definitions are the same as for the
new H_GET_CPU_CHARACTERISTICS hypercall.
There is also a new capability, KVM_CAP_PPC_GET_CPU_CHAR, which
indicates whether the new ioctl is available.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
This works on top of the single escalation support. When in single
escalation, with this change, we will keep the escalation interrupt
disabled unless the VCPU is in H_CEDE (idle). In any other case, we
know the VCPU will be rescheduled and thus there is no need to take
escalation interrupts in the host whenever a guest interrupt fires.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
The prodded flag is only cleared at the beginning of H_CEDE,
so every time we have an escalation, we will cause the *next*
H_CEDE to return immediately.
Instead use a dedicated "irq_pending" flag to indicate that
a guest interrupt is pending for the VCPU. We don't reuse the
existing exception bitmap so as to avoid expensive atomic ops.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
That feature, provided by Power9 DD2.0 and later, when supported
by newer OPAL versions, allows us to sacrifice a queue (priority 7)
in favor of merging all the escalation interrupts of the queues
of a single VP into a single interrupt.
This reduces the number of host interrupts used up by KVM guests
especially when those guests use multiple priorities.
It will also enable a future change to control the masking of the
escalation interrupts more precisely to avoid spurious ones.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
Add details about enabled queues and escalation interrupts.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
This merges in the ppc-kvm topic branch of the powerpc tree to get
two patches which are prerequisites for the following patch series,
plus another patch which touches both powerpc and KVM code.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
For reference:
* https://www.kernel.org/doc/html/latest/doc-guide/kernel-doc.html#function-documentation
Fix non-fatal warning:
arch/mips/kernel/branch.c:418: warning: Excess function parameter 'returns' description in '__compute_return_epc_for_insn'
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Maciej W. Rozycki <macro@mips.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18031/
[jhogan@kernel.org: Expand subject slightly]
Signed-off-by: James Hogan <jhogan@kernel.org>
|
