summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2012-05-21blackfin: bf60x: pm: Add a debug option to calculate kernel wakeup time.Sonic Zhang
Display the total time when kernel resumes normal from standby or suspend to mem mode. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: bf60x: add wakeup source selectSteven Miao
Support select the wakeup source for power management on bf60x. Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: bf60x: make clock changeable in kernel menuconfigBob Liu
Add clock changeable support in kernel menuconfig for bf60x. Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin:mach-bf609: fix norflash for bf609-ezkitBob Liu
Set smc register to async flash protocol mode and use physmap driver instead of bfin-bf6xx. Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: mach-bf609: add can_wakeup to ethernet deviceBob Liu
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: remove redundant CONFIG_BF60x macroSonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: rotary: Add pm_wakeup flag to platform data structure.Sonic Zhang
Rotary can't be used as a wakeup source in all platform. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21bfin_gpio: fix bf548-ezkit kernel fail to bootSteven Miao
Fix bf548-ezkit kernel fail to boot when request peripheral pins. Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21bfin_dma: fix initcall return error in proc_dma_init()Steven Miao
Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21Blackfin: delete fork funcMike Frysinger
We don't implement fork() since we are no-mmu, so redirect it to the existing ENOSYS stub rather than adding a custom EINVAL one. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21Blackfin: fix unused clk var warningMike Frysinger
This is only used on BF60x code (so this patch should get squashed into the original one that added it). Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: SMP: pda: "next" field of blackfin_pda only used in SMP kernelSteven Miao
Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: GPIO: Implement more GPIO APIsSonic Zhang
Implement more GPIO APIs in case GPIOLIB is disabled. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: mach-common: ints-priority: fix compile errorBob Liu
IRQ_PINT4/PINT5 are not defined on !CONFIG_BF60x, this patch fix it. Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: bf60x: bfin_uart: Add more LCR bits masksSonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: license: Change ADI BSD licenseSonic Zhang
Change ADI BSD license to standart 3 clause BSD license for some blackfin arch code requested by ADI Legal. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: bf537-stamp: update board file for platform bfin_sport deviceAaron Wu
Blackfin sport driver has been rewrited update board file according. Signed-off-by: Aaron Wu <Aaron.Wu@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: bf60x: cleanup mem_map macroSteven Miao
Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: bf60x: fix compiling warningBob Liu
Fix several compiling warning for bf60x. Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: bf60x: add power management supportSteven Miao
Add bf60x cpu pm callbacks and change blackfin pm framework to support bf60x. Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: bf60x: add l2 ecc irq handlerBob Liu
bf60x support l2 hardware ecc error check, add panic when double bits ecc error happened. Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: twi: move twi bit mask macro to twi head fileSonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: bf60x: enable gptimer clock sourceSteven Miao
Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: add spi/sport3/ppi head file for bf60xScott Jiang
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: cplb: add support for bf60xBob Liu
Bf60x support big CPLB pages, this commit enable it. Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: mach-common: add sec support for bf60xSteven Miao
Add system event controller support for bf60x so that interrupt can be handled. Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: bf60x: add clock supportSteven Miao
Add clock support for bf60x. Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: add bf60x to current frameworkBob Liu
This patch added bf60x to current blackfin kernel framework. Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: mach-bf609: add machine filesSonic Zhang
Add machine files for bf60x including head files, Kconfig/Makefile and board file. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: asm: fix blackfin.h brokenBob Liu
do{...}while makes no sense in __ASSEMBLY__ code paths. now kernels fail to build: arch/blackfin/mach-bf561/atomic.S: Assembler messages: arch/blackfin/mach-bf561/atomic.S:48: Error: syntax error. Input text was do. arch/blackfin/mach-bf561/atomic.S:48: Error: arch/blackfin/mach-bf561/atomic.S:48: Error: syntax error. Input text was }. arch/blackfin/mach-bf561/atomic.S:48: Error: arch/blackfin/mach-bf561/atomic.S:53: Error: syntax error. Input text was do. arch/blackfin/mach-bf561/atomic.S:53: Error: arch/blackfin/mach-bf561/atomic.S:53: Error: syntax error. Input text was }. Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: configs: add SMP support back to BF561-EZKIT-SMP_defconfigBob Liu
SMP support was removed from BF561-EZKIT-SMP_defconfig in last commit by mistake, this patch add it back. Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2012-05-20sparc32: use flushi when run-time patching in per_cpu_patchSam Ravnborg
Davis S. Miller wrote: " The way we do that now is overkill. We only needed to use the MMU cache ops when we had sun4c around because sun4c lacked support for the "flush" instruction. But all sun4m and later chips have it so we can use it unconditionally. So in the per_cpu_patch() code, get rid of the cache ops invocation, and instead execute a "flush %reg" after each of the instruction patch assignments, where %reg is set to the address of the instruction that was stored into. Perhaps take the flushi() definition from asm/cacheflush_64.h and place it into asm/cacheflush.h, then you can simply use that. " Implemented as per suggestion. Moved run-time patching before we call paging_init(), so helper methods in paging_init() may utilise run-time patching too. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-20sparc32: fix cpuid_patch run-time patchingSam Ravnborg
We hang forever when trying to do run-time patching of instructions identified by the cpuid_patch section Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-20mfd: Remove confusing ab8500-i2c file and merge into ab8500-coreLee Jones
ab8500-i2c is used as core code to register the ab8500 device. After allocating ab8500 memory, it immediately calls into ab8500-core where the real initialisation takes place. This patch moves all core registration and memory allocation into the true ab8500-core file and removes ab8500-i2c completely. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20m68k: add a defconfig for the M5475EVB ColdFire with MMU boardGreg Ungerer
Add a default configuration for the newly supported ColdFire CPUs running with MMU enabled. This is based on Freescales own M5475EVB demo board. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: unaligned.h fix for M68000 coreLuis Alves
This patch fixes unaligned memory access for the 68000 core based cpu's. Some time ago, my cpu (68000) was raising address/bus error's when mounting cifs shares (didn't bother to debug it at the time). After developing the MMC/SD card driver I was having the same issue when mounting the vfat fs. I've traced the issue down to the 'unaligned.h' file. (I guess nobody has ever used unaligned.h back in the 68328 'era'. Signed-off-by: Luis Alves <ljalvs@gmail.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68k: merge the MMU and non-MMU versions of the arch dma codeGreg Ungerer
The majority of the m68k architecture dma code is the same, so merge the current separated files dma_no.c and dma_mm.c back into a single dma.c The main alloc and free routines are a little different, so we keep a single #ifdef based on CONFIG_MMU for them. All the other support functions are now identical. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-05-20m68knommu: reorganize the no-MMU cache flushing to match m68kGreg Ungerer
Introduce cache_push() and cache_clear() functions for the non-MMU m68k devices. With these in place we can more easily merge some of the common m68k arch code. In particular by reorganizing the __flush_cache_all() code and separating the cache push and clear functions it becomes trivial to implement the new cache_push() and cache_clear() functions. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-05-20m68knommu: move the 54xx platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 532x platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 5407 platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 5307 platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 528x platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 527x platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 5272 platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 5249 platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 523x platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 520x platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 5206 platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
generated by cgit (git 2.34.1) at 2025-10-02 17:04:34 +0000