| Age | Commit message (Collapse) | Author |
|---|
|
Select CONFIG_TOUCHSCREEN_MAX11801 so that we can have touchscreen
funtionality by default on Engicam i.CoreM6 Quad boards.
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
|
|
The best place to register the CPU cooling device is from the cpufreq
driver as we would know if all the resources are already available or
not. That's what is done for the cpufreq-dt.c driver as well.
The cpu-cooling driver for dbx500 platform was just (un)registering
with the thermal framework and that can be handled easily by the cpufreq
driver as well and in proper sequence as well.
Get rid of the cooling driver and its its users and manage everything
from the cpufreq driver instead.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
BCM7260 has the same UART base address as 7268, order the entries by
ascending chip number and alias the 7268 definition to the 7260
definition.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Due to the brcmstb SoC's memory map, we may have holes in the memory if
we don't populate the maximum amount of memory supported by e.g: the
first memory controller which spans either the first 1GiB or first 2GiB
of memory.
We need to select ARCH_HAS_HOLES_MEMORYMODEL in order to enable
CONFIG_HAVE_ARCH_PFN_VALID on platforms that have CONFIG_SPARSEMEM
enabled.
Signed-off-by: Danesh Petigara <danesh.petigara@broadcom.com>
[florian: Detailed commit message]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Some Host Controller hardware blocks, like the OHCI, EHCI and SDIO
controllers, have hardware blocks that are not capable of doing 64 bit
DMA. These host controllers fail on boards with >3GB of memory because
the memory above 3GB is located physically >= 0x100000000 and can only
be accessed using 64 DMA. The way Linux is currently configured for
BRCMSTB systems, the memory given to drivers for DMA through functions
like dma_alloc_coherent() comes from CMA memory and CMA memory is taken
from the top of physical memory. When these drivers get a DMA buffer
with an address >=0x100000000, they end up dropping the upper 32 bit of
the address causing the hardware to DMA to incorrect memory, typically
BMEM (custom memory carveout). This issue was discovered on a
BCM97449SSV_DDR4 system with 4GB or memory.
The fix is to enable CONFIG_ZONE_DMA. On ARM systems this makes sure
that all DMA memory is located within the first 32 bits of address
space.
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Per e-mail from Sergei Shtylyov, the DT spec dictates it should be
"okay" (although "ok" is also recognized). Thus, changing all "ok" to
"okay" in NS2 device tree files
Suggested-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Commit 09b871ffd4d8 (parisc: Define access_ok() as macro) missed to mark uaddr
as used, which then gives compiler warnings about unused variables.
Fix it by comparing uaddr to uaddr which then gets optimized away by the
compiler.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 09b871ffd4d8 ("parisc: Define access_ok() as macro")
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The previously submitted patch did not resolve the random segmentation
faults observed on the phantom buildd system. There are still
unresolved problems with the Debian 4.8 and 4.9 kernels on C8000.
The attached patch removes the flush of the offset map pages and does a
whole data cache flush for large ranges. No other arch flushes the
offset map in these routines as far as I can tell.
I have not observed any random segmentation faults on rp3440 in two
weeks of testing with 4.10.0 and 4.10.1.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The parisc kernel doesn't work with CONFIG_MODVERSIONS since the commit
71810db27c1c853b335675bee335d893bc3d324b. It can't load modules with the
error: "module unix: Unknown relocation: 41".
The commit changes __kcrctab from 64-bit valus to 32-bit values. The
assembler generates R_PARISC_SECREL32 secrel relocation for them and the
module loader doesn't support this relocation.
This patch adds the R_PARISC_SECREL32 relocation to the module loader.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- self-test failure of crc32c on powerpc
- regressions of ecb(aes) when used with xts/lrw in s5p-sss
- a number of bugs in the omap RNG driver
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: s5p-sss - Fix spinlock recursion on LRW(AES)
hwrng: omap - Do not access INTMASK_REG on EIP76
hwrng: omap - use devm_clk_get() instead of of_clk_get()
hwrng: omap - write registers after enabling the clock
crypto: s5p-sss - Fix completing crypto request in IRQ handler
crypto: powerpc - Fix initialisation of crc32c context
|
|
This was detected by allmodconfig, errors reported:
ERROR: "empty_zero_page" [net/ceph/libceph.ko] undefined!
ERROR: "__ucmpdi2" [lib/842/842_decompress.ko] undefined!
ERROR: "empty_zero_page" [fs/nfs/objlayout/objlayoutdriver.ko] undefined!
ERROR: "empty_zero_page" [fs/exofs/exofs.ko] undefined!
ERROR: "empty_zero_page" [fs/crypto/fscrypto.ko] undefined!
ERROR: "__ucmpdi2" [fs/btrfs/btrfs.ko] undefined!
ERROR: "pm_power_off" [drivers/regulator/act8865-regulator.ko] undefined!
ERROR: "__ucmpdi2" [drivers/media/i2c/adv7842.ko] undefined!
ERROR: "__clear_user" [drivers/md/dm-mod.ko] undefined!
ERROR: "__clear_user" [net/netfilter/x_tables.ko] undefined!
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
Was getting the following error with allmodconfig:
ERROR: "__get_user_bad" [lib/test_user_copy.ko] undefined!
This was simply a missing break statement, causing an unwanted fall
through.
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
When building allmodconfig this warning shows.
fs/ocfs2/file.c: In function 'ocfs2_file_write_iter':
./arch/openrisc/include/asm/cmpxchg.h:81:3: warning: value computed is
not used [-Wunused-value]
((typeof(*(ptr)))__xchg((unsigned long)(with), (ptr), sizeof(*(ptr))))
^
Applying the same patch logic that was done to the cmpxchg macro.
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
The Amlogic P212 reference design is used by other devices as well, such
as (for example) the Khadas VIM boards. Thus this patch adds and moves
all common entries from meson-gxl-s905x-p212.dts to a new, separate
meson-gxl-s905x-p212.dtsi (which can be re-used on boards such as the
Khadas VIM).
Support for all boards based on the P212 reference design includes:
- enabling IR support
- enabling the SAR ADC (SARADC_CH1 is connected to a resistor which
indicates the hardware revision, a similar design is found on the
Khadas VIM boards)
- all MMC controllers (which means that SDIO wifi, the SD card and the
eMMC are now supported)
- pwm_ef as dependency for the SDIO wifi modules
- uart_A which is connected to the bluetooth module (the bluetooth
module itself is not enabled yet due to missing devicetree bindings
for the Broadcom serial bluetooth devices)
- uart_AO is moved to the .dtsi (as all known devices use it as their
boot-console)
Specific to the P212 board:
- this also enables the CVBS connector (which is not available on the
Khadas VIM boards for example)
- Realtek based SDIO wifi (instead of Broadcom which most other devices
use)
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
The rdtgroup_kn_unlock waits for the last user to release and put its
node. But it's calling kernfs_put on the node which calls the
rdtgroup_kn_unlock, which might not be the group's directory node, but
another group's file node.
This race could be easily reproduced by running 2 instances
of following script:
mount -t resctrl resctrl /sys/fs/resctrl/
pushd /sys/fs/resctrl/
mkdir krava
echo "krava" > krava/schemata
rmdir krava
popd
umount /sys/fs/resctrl
It triggers the slub debug error message with following command
line config: slub_debug=,kernfs_node_cache.
Call kernfs_put on the group's node to fix it.
Fixes: 60cf5e101fd4 ("x86/intel_rdt: Add mkdir to resctrl file system")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Shaohua Li <shli@fb.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1489501253-20248-1-git-send-email-jolsa@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Pavel Machek reported the following warning on x86-32:
WARNING: kernel stack frame pointer at f50cdf98 in swapper/2:0 has bad value (null)
The warning is caused by the unwinder not realizing that it reached the
end of the stack, due to an unusual prologue which gcc sometimes
generates for aligned stacks. The prologue is based on a gcc feature
called the Dynamic Realign Argument Pointer (DRAP). It's almost always
enabled for aligned stacks when -maccumulate-outgoing-args isn't set.
This issue is similar to the one fixed by the following commit:
8023e0e2a48d ("x86/unwind: Adjust last frame check for aligned function stacks")
... but that fix was specific to x86-64.
Make the fix more generic to cover x86-32 as well, and also ensure that
the return address referred to by the frame pointer is a copy of the
original return address.
Fixes: acb4608ad186 ("x86/unwind: Create stack frames for saved syscall registers")
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/50d4924db716c264b14f1633037385ec80bf89d2.1489465609.git.jpoimboe@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
This can be const, and will need to be const when we start initializing
it from clkdm data.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
This is not used so let's remove it.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We are just iterating over the slave_ports lists, so we can
use list_for_each_entry() no problem.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We want to be able to dynamically allocate struct omap_hwmod_ocp_if and
struct omap_hwmod at device driver probe time based on .dts data.
Current setup with the linkspace using memblock_virt_alloc() makes
this tricky, so let's get rid of struct linkspace and directly set up
struct omap_hwmod_ocp_if as the master and slave lists.
As we are currently not using the master_ports either, let's remove it
too. And let's add the struct omap_hwmod_ocp_if node directly to the
slave_ports list.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We still get a build error in random configurations, after this has been
modified a few times:
In file included from include/linux/mm.h:68:0,
from include/linux/suspend.h:8,
from arch/x86/kernel/asm-offsets.c:12:
arch/x86/include/asm/pgtable.h:66:26: error: redefinition of 'native_pud_clear'
#define pud_clear(pud) native_pud_clear(pud)
My interpretation is that the build error comes from a typo in __PAGETABLE_PUD_FOLDED,
so fix that typo now, and remove the incorrect #ifdef around the native_pud_clear
definition.
Fixes: 3e761a42e19c ("mm, x86: fix HIGHMEM64 && PARAVIRT build config for native_pud_clear()")
Fixes: a00cc7d9dd93 ("mm, x86: add support for PUD-sized transparent hugepages")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Thomas Garnier <thgarnie@google.com>
Link: http://lkml.kernel.org/r/20170314121330.182155-1-arnd@arndb.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Commit 1b028f784e8c introduced two mmap() bases for 32-bit syscalls and for
64-bit syscalls. The mmap() code in x86 was modified to handle the
separation, but the patch series missed to update the hugetlb code.
As a consequence a 32bit application mapping a file on hugetlbfs uses the
64-bit mmap base for address space allocation, which fails.
Adjust the hugetlb mapping code to use the proper bases depending on the
syscall invocation mode (64-bit or compat).
[ tglx: Massaged changelog and switched from asm/compat.h to linux/compat.h ]
Fixes: commit 1b028f784e8c ("x86/mm: Introduce mmap_compat_base() for 32-bit mmap()")
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: 0x7f454c46@gmail.com
Cc: linux-mm@kvack.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: http://lkml.kernel.org/r/20170314114126.9280-1-dsafonov@virtuozzo.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
On some DDR controllers, compatible with the sama5d3 one,
the sequence to enter/exit/re-enter the self-refresh mode adds
more constrains than what is currently written in the at91_idle
driver. An actual access to the DDR chip is needed between exit
and re-enter of this mode which is somehow difficult to implement.
This sequence can completely hang the SoC. It is particularly
experienced on parts which embed a L2 cache if the code run
between IDLE calls fits in it...
Moreover, as the intention is to enter and exit pretty rapidly
from IDLE, the power-down mode is a good candidate.
So now we use power-down instead of self-refresh. As we can
simplify the code for sama5d3 compatible DDR controllers,
we instantiate a new sama5d3_ddr_standby() function.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: <stable@vger.kernel.org> # v4.1+
Fixes: 017b5522d5e3 ("ARM: at91: Add new binding for sama5d3-ddramc")
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
|
Updated sata node to add ecc register address and dma coherence
property.
Enable sata on ls1012a platforms as well.
Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
set_up_temporary_text_mapping() and relocate_restore_code() require
adjustments to handle additional page table level.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170313143309.16020-7-kirill.shutemov@linux.intel.com
[ Minor readability edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Modify vmalloc_fault() to handle additional page table level.
With 4-level paging, copying happens on p4d level, as we have pgd_none()
always false if p4d_t is folded.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170313143309.16020-6-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Add additional page table level handing. It's mostly mechanical.
The only quirk is that with p4d folded, 'pgd' is equal to 'p4d' in
kernel_ident_mapping_init(). The pgd entry has to point to the pud
page table in this case.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170313143309.16020-5-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Extend get_user_pages_fast() to handle an additional page table level.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170313143309.16020-4-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This patch only covers simple cases. Less trivial cases will be
converted with separate patches.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170313143309.16020-3-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This patch extends x86 headers to enable 5-level paging support.
It's still based on <asm-generic/5level-fixup.h>. We will get to the
point where we can have <asm-generic/pgtable-nop4d.h> later.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170313143309.16020-2-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Enable the qspi controller on sodia board and add the flash chip
(n25q512a).
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull some more powerpc fixes from Michael Ellerman:
"The main item is the addition of the Power9 Machine Check handler.
This was delayed to make sure some details were correct, and is as
minimal as possible.
The rest is small fixes, two for the Power9 PMU, two dealing with
obscure toolchain problems, two for the PowerNV IOMMU code (used by
VFIO), and one to fix a crash on 32-bit machines with macio devices
due to missing dma_ops.
Thanks to:
Alexey Kardashevskiy, Cyril Bur, Larry Finger, Madhavan Srinivasan,
Nicholas Piggin"
* tag 'powerpc-4.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: POWER9 machine check handler
powerpc/64s: allow machine check handler to set severity and initiator
powerpc/64s: fix handling of non-synchronous machine checks
powerpc/pmac: Fix crash in dma-mapping.h with NULL dma_ops
powerpc/powernv/ioda2: Update iommu table base on ownership change
powerpc/powernv/ioda2: Gracefully fail if too many TCE levels requested
selftests/powerpc: Replace stxvx and lxvx with stxvd2x/lxvd2x
powerpc/perf: Handle sdar_mode for marked event in power9
powerpc/perf: Fix perf_get_data_addr() for power9 DD1
powerpc/boot: Fix zImage TOC alignment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt
Base patches for Gemini device trees:
- Bindings for the platform.
- Device trees for everything that was available as board
files previously.
- New device tree for my target system SQ201.
- Device tree bindings for the watchdog. The driver was merged
to the watchdog subsystem so this was probably just missed
by the maintainer, and it is ACKed by Rob Herring.
* tag 'gemini-dts-base' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: add watchdog to the Gemini
watchdog: add DT bindings for Cortina Gemini
ARM: dts: add a devicetree for Wiliboard WBD-222
ARM: dts: add a devicetree for Wiliboard WBD-111
ARM: dts: add a devicetree for Teltonika RUT1xx
ARM: dts: add a devicetree for Raidsonic NAS IB-4220-B
ARM: dts: add device tree for Gemini SoC and SQ201
ARM: dts: add top-level DT bindings for Cortina Gemini
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/soc
This patchset:
- Converts the Gemini platform to device tree.
- Deletes all the board files.
- Fixes the prerequisities for a multiplatform boot and
switches to multiplatform.
* tag 'gemini-multiplat-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: gemini: convert to ARMv4 multiplatform
ARM: gemini: select ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR
ARM: gemini: switch to sparse IRQs
ARM: gemini: delete all boardfiles
ARM: gemini: DT for the Cortina Gemini SoC platforms
ARM: gemini: convert to MULTI_IRQ_HANDLER
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/arm64
Renesas ARM64 Based SoC Defconfig Updates for v4.12
* Enable SH Mobile I2C controller
* tag 'renesas-arm64-defconfig-for-v4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: defconfig: Enable SH Mobile I2C controller
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
The kernel doesn't boot with both PROFILE_ANNOTATED_BRANCHES=y and KASAN=y
options selected. With branch profiling enabled we end up calling
ftrace_likely_update() before kasan_early_init(). ftrace_likely_update() is
built with KASAN instrumentation, so calling it before kasan has been
initialized leads to crash.
Use DISABLE_BRANCH_PROFILING define to make sure that we don't call
ftrace_likely_update() from early code before kasan_early_init().
Fixes: ef7f0d6a6ca8 ("x86_64: add KASan support")
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: kasan-dev@googlegroups.com
Cc: Alexander Potapenko <glider@google.com>
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: lkp@01.org
Cc: Dmitry Vyukov <dvyukov@google.com>
Link: http://lkml.kernel.org/r/20170313163337.1704-1-aryabinin@virtuozzo.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fixes for omaps for v4.11-rc cycle:
- Fix smartreflex platform data regression where I accidentally
removed legacy platform data still in use
- Fix hypervisor mode for thumb2 kernel
- Fix misplaced tpic2810 to move it to right bus
- Enable INPUT_MOUSEDEV as a loadable module have mice working
- Fix use of gpio-key,wakeup and use wakeup-source instead as
this accidentally sneaked in during the merge window
- Fix error handling for onenand to properly return error
- Remove legacy gpmc-nand.c that's now dead code, this
also removes dependency to the MTD tree for further driver
changes
- Fix device node reference count errors for omap3 and
related to it also release device nodes after no longer
needed
* tag 'omap-for-v4.11/fixes-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Release device node after it is no longer needed.
ARM: OMAP2+: Fix device node reference counts
ARM: OMAP2+: Remove legacy gpmc-nand.c
ARM: OMAP2+: gpmc-onenand: propagate error on initialization failure
ARM: dts: am335x-pcm953: Fix legacy wakeup source binding
ARM: omap2plus_defconfig: Enable INPUT_MOUSEDEV as loadable modules
ARM: dts: am57xx-idk: tpic2810 is on I2C bus, not SPI
ARM: OMAP5 / DRA7: Fix HYP mode boot for thumb2 build
ARM: OMAP3: Fix smartreflex platform data regression
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
http://github.com/Broadcom/stblinux into fixes
This pull request contains Broadcom ARM-based SoC Device Tree fixes for 4.11,
please pull the following:
- Jon fixes the UART output on the Broadcom bcm953012k reference board by
using the proper clock reference instead of hard-coding the baud rate
- Jon also fixes the memory map on the bcm953012k reference board by using
the appropriate physical RAM start address
- Jon finally fixes the interrupt type for the Cortex A9 global and local
timers found in the BCM5301X SoC (Norsthar).
* tag 'arm-soc/for-4.11/devicetree-fixes' of http://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags
ARM: dts: BCM5301X: Fix memory start address
ARM: dts: BCM5301X: Fix UARTs on bcm953012k
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
This adds the AB8500 clocks to the device tree using the new
bindings from the clk subsystem, making audio work again.
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Intel Merrifield platform has a Basin Cove PMIC to handle in particular
power button events. Add necessary bits to enable it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170308112422.67533-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Intel Medfield may use common for Intel MID devices power sequence.
Remove unneded custom power off stub.
While here, remove function forward declaration.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170308112422.67533-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Move platform_setup call higher in initialization sequence so that it
could change kernel command line.
Check command line passed to simulator in ISS platform_stup and update
kernel command line if there's anything.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
There are three simcalls implemented by ISS and QEMU related to
argc/argv processing: SYS_iss_argc (get number of command line
arguments), SYS_iss_argv_size (get size of command line argument block)
and SYS_iss_set_argv (copy command line arguments to virtual guest
address).
Add definitions for these calls to iss/include/platform/simcall.h
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Drop commented out code, unused extern definition, extra blank lines.
Rewrite iss_panic_block initialization in C99 style.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
commit c0104d38a740 ("x86, apic: Unify identical register_lapic_address()
functions") renames acpi_register_lapic_address to register_lapic_address.
But acpi_register_lapic_address remains in a comment, and renaming it to
register_lapic_address is not suitable for this comment.
Remove acpi_register_lapic_address and rewrite the comment.
[ tglx: LAPIC address can be registered either by ACPI/MADT or MP info ]
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Cc: yinghai@kernel.org
Link: http://lkml.kernel.org/r/1488805690-5055-1-git-send-email-douly.fnst@cn.fujitsu.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The SET_APIC_ID() macro obfusates the code. Remove it to increase
readability and add a comment to the apic struct to document that the
callback is required on 64-bit.
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Link: http://lkml.kernel.org/r/1488971270-14359-1-git-send-email-douly.fnst@cn.fujitsu.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
ST's spec says the page size of 24C64 is 32 byte.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
Microchip's spec says the page size of 24LC128 is 64 byte.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
Remove the WARNING message associated with multiple NMI handlers as
there are at least two that are legitimate. These are the KGDB and the
UV handlers and both want to be called if the NMI has not been claimed
by any other NMI handler.
Use of the UNKNOWN NMI call chain dramatically lowers the NMI call rate
when high frequency NMI tools are in use, notably the perf tools. It is
required on systems that cannot sustain a high NMI call rate without
adversely affecting the system operation.
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Reviewed-by: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Russ Anderson <russ.anderson@hpe.com>
Cc: Frank Ramsay <frank.ramsay@hpe.com>
Cc: Tony Ernst <tony.ernst@hpe.com>
Link: http://lkml.kernel.org/r/20170307210841.730959611@asylum.americas.sgi.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
