summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2011-07-20ARM: EXYNOS4: Support system level power down configurationJaecheol Lee
EXYNOS4 supports 3 different system level power down mode by PMU (Power Management Unit). Each power down mode need to configure many PMU registers with different value. This patch supports function to configure PMU registers with pre-defined values in PMU code. This function may be used by PM code and AFTR/LPA support driver. Signed-off-by: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: EXYNOS4: Add SPDIF for SMDKV310Naveen Krishna Chatradhi
This patch adds spdif to the machine supported device list for SMDKV310. Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: EXYNOS4: Add support Core1 Power On/Off with hotplug in/outJungHi Min
To insert the code for power on/off with pmu control to support hotplug in/out core1 As for hotplug.c, the codes for core1 to be hotplug in/out is inserted. As for regs-pmu.h, S5P_CORE_LOCAL_PWR_EN is defined. As for platsmp.c, the codes for core1 to be powered on is inserted. Signed-off-by: JungHi Min <junghi.min@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: EXYNOS4: Add chained enrty/exit function to uart interrupt handlerChanghwan Youn
This patch adds chained IRQ enter/exit functions to uart interrupt handler in order to function correctly on primary controllers with different methods of flow control. Signed-off-by: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: EXYNOS4: Remove clock event timers using ARM private timersChanghwan Youn
External GIC cannot support PPI (Private Peripheral Interrupt) for ARM private timers. Thus MCT should be selected as clock event timers by default. Signed-off-by: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: EXYNOS4: Add support external GICChanghwan Youn
For full support of power modes, this patch adds implementation external GIC on EXYNOS4. External GIC of Exynos4 cannot support register banking so several interrupt related code for CPU1 should be different from that of CPU0. Signed-off-by: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: GIC: move gic_chip_data structure declaration to headerChanghwan Youn
Since Samsung EXYNOS4210 cannot support register banking in GIC, so needs to update CPU interface base address. The 'gic_chip_data' is used for it, this patch moves gic_chip_data structure declaraton to arch/arm/include/asm/hardware/gic.h to use it. Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: EXYNOS4: set the affinity of mct1 interrupt using IRQ_MCT_L1Changhwan Youn
IRQ_MCT_L1 is connected directly to GIC in external GIC mapping, while in internal GIC mapping, it is connected to GIC through interrupt combiner. Therfore the affinity for mct1 event timer interrupt should be changed through IRQ_MCT_L1. Signed-off-by: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: EXYNOS4: modify interrupt mappings for external GICChanghwan Youn
To support external GIC needs to update mapping of interrupt number. This patch modifies it for external GIC and accordingly removes the unused code. Signed-off-by: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: EXYNOS4: Add external GIC io memory mappingChanghwan Youn
This patch adds external GIC io memory mapping to support external GIC on EXYNOS4. Signed-off-by: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: EXYNOS4: Enable SATA on SMDKV310Inderpal Singh
Adds device definition to enable SATA on SMDKV310 Signed-off-by: Inderpal Singh <inderpal.s@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: EXYNOS4: Add qt602240 touch screen device on Universal_C210Marek Szyprowski
This patch adds definitions to enable support for qt602240 touch screen driver for Universal C210 board. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: EXYNOS4: Add MCS Touchkey device on Universal_C210Marek Szyprowski
This patch adds definitions to enable support for MCS Touchkey driver for Universal C210 board. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: EXYNOS4: Add FIMC device on Universal_C210Marek Szyprowski
This patch adds definitions to enable support for s5p-fimc driver for Universal C210 board. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: S5P: Added selection DEV_PWM for HRTKukjin Kim
Basically, the SAMSUNG_DEV_PWM is required to use s5p-time.c for HRT. Reported-by: Marek Szyprowski<m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: EXYNOS4: Fix compilation breakMarek Szyprowski
The patch "ARM: SAMSUNG: Add support for pre-sleep/post-restore gpio control" broke compilation on Exynos4 platform with power management enabled. This patch adds missing stubs that fixes this issue. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: SAMSUNG: Add support for pre-sleep/post-restore gpio controlBen Dooks
Add a callback so that per-arch can do pre-sleep and post-resume gpio configuration so that for the S3C64XX, the GPIO configuration is restored before the sleep mode is cleared. For the S3C64XX case, it means that the GPIOs get set back to normal operation after the restore code puts the original configurations back in after the Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: S3C64XX: Ensure VIC based IRQs can be resumed fromBen Dooks
Any interrupts based off either of the onboard VICs cannot be resumed from any more as it seems set_irq_wake() is now checking the error code returned from the low level handlers and not setting the wake-state on the interrupt if this fails. Ensure that we make the interrupts we can resume from available on the VIC and then do a pre-sleep mask of all the VIC interrupts as the wakeup is handled by a seperate block. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: S5PV210: Add clkdev supportThomas Abraham
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: S5PC100: Add clkdev supportThomas Abraham
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: S5P64X0: Add clkdev supportThomas Abraham
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: S3C64XX: Add clkdev supportThomas Abraham
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: S3C24XX: Add clkdev supportThomas Abraham
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20ARM: SAMSUNG: Add clkdev infrastructureThomas Abraham
The struct clk definition for Samsung platforms is extended to include a instance of struct clk_lookup and a device name. When clocks are registered using s3c24xx_register_clock function, the dev_id, con_id and clk members are initialized with information from the struct clk instance and struct clk_lookup member is registered. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20switch do_spufs_create() to user_path_create(), fix double-unlockAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-19Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: davinci: DM365 EVM: fix video input mux bits ARM: davinci: Check for NULL return from irq_alloc_generic_chip arm: davinci: Fix low level gpio irq handlers' argument
2011-07-19Merge branch 'cross-platform/clkdev' into next/cross-platformArnd Bergmann
2011-07-19ARM: Consolidate the clkdev header filesKyungmin Park
Now most of ARM machines has the alsmot same __clk_get/put() macro So place it at the arch/arm/include/asm/clkdev.h and remove the reduntant header files But some machines don't have the same form as above. It can use the machince specific clkdev file by HAVE_MACH_CLKDEV config Now there are only 3 caese. 1) define the clk structure with clkdev macro => Need to move clk structure to proper header file arch/arm/mach-versatile/include/mach/clkdev.h arch/arm/mach-realview/include/mach/clkdev.h arch/arm/mach-vexpress/include/mach/clkdev.h arch/arm/mach-integrator/include/mach/clkdev.h 2) export the __clk_get/put function at clock.c arch/arm/mach-shmobile/include/mach/clkdev.h 3) demuxing the clk source arch/arm/mach-u300/include/mach/clkdev.h Acked-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-07-19ARM: Tegra: Seaboard: Fix I2C bus numbering for ADT7461Stephen Warren
Bus number 4 doesn't exist in the mainline kernel. The device is attached to bus number 3. (In the ChromeOS kernel, one of the I2C busses is split in two with a mux, this pushing all later busses to a higher bus number. In this case, 4 is the correct bus number for the ADT7461). Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-07-19ARM: Tegra: Trimslice: Tri-state DAP3 pinmuxStephen Warren
DAP3 is used for a bunch of GPIOs. Not tri-stating the pins means audio signals get sent out there, and this ends up resetting USB and breaking SDHCI too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-07-19ARM: 7000/1: LPAE: Use long long printk format for displaying the pudCatalin Marinas
Currently using just long but this is not enough for the LPAE format (64-bit entries). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-19ARM: 6999/1: head, zImage: Always Enter the kernel in ARM stateDave Martin
Currently, the documented kernel entry requirements are not explicit about whether the kernel should be entered in ARM or Thumb, leading to an ambiguitity about how to enter Thumb-2 kernels. As a result, the kernel is reliant on the zImage decompressor to enter the kernel proper in the correct instruction set state. This patch changes the boot entry protocol for head.S and Image to be the same as for zImage: in all cases, the kernel is now entered in ARM. Documentation/arm/Booting is updated to reflect this new policy. A different rule will be needed for Cortex-M class CPUs as and when support for those lands in mainline, since these CPUs don't support the ARM instruction set at all: a note is added to the effect that the kernel must be entered in Thumb on such systems. Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-19ARM: btc: avoid invalidating the branch target cache on kernel TLB maintanenceRussell King
Kernel space needs very little in the way of BTC maintanence as most mappings which are created and destroyed are non-executable, and so could never enter the instruction stream. The case which does warrant BTC maintanence is when a module is loaded. This creates a new executable mapping, but at that point the pages have not been initialized with code and data, so at that point they contain unpredictable information. Invalidating the BTC at this stage serves little useful purpose. Before we execute module code, we call flush_icache_range(), which deals with the BTC maintanence requirements. This ensures that we have a BTC maintanence operation before we execute code via the newly created mapping. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-19davinci: DM365 EVM: fix video input mux bitsJon Povey
Video input mux settings for tvp7002 and imager inputs were swapped. Comment was correct. Tested on EVM with tvp7002 input. Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk> Acked-by: Manjunath Hadli <manjunath.hadli@ti.com> Cc: stable@kernel.org Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-07-19ARM: davinci: Check for NULL return from irq_alloc_generic_chipTodd Poynor
Avoid NULL dereference of irq_alloc_generic_chip return in low memory conditions. Signed-off-by: Todd Poynor <toddpoynor@google.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-07-19powerpc: Exporting boot_cpuid_physAndrew Gabbasov
Kernel loadable module can use hard_smp_processor_id() if building with SMP kernel. In order to make it work for UP kernels too, boot_cpuid_phys symbol (which is what hard_smp_processor_id() macro resolves to in non-SMP configuration) must be exported. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-19powerpc: Add CFAR to oops outputMichael Neuling
Now we have the CFAR saved add it to the oops output. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-19powerpc/irq: Quieten irq mapping printksAnton Blanchard
HFI creates interrupts each time a window is setup. This results in a lot of messages in the kernel log buffer: irq: irq 199007 on host null mapped to virtual irq 351 This box has over 3500 of them, causing more important kernel messages to be overwritten. We can get at this information via debugfs now so we may as well turn it into a pr_debug. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-19powerpc: Enable lockup and hung task detectors in pseries and ppc64 defeconfigsAnton Blanchard
As a result of changes to Kconfig files, we no longer enable the lockup and hung task detectors. Both are very light weight and provide useful information in the event of a hang, so reenable them. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-19powerpc: Add mpt2sas driver to pseries and ppc64 defconfigAnton Blanchard
Add mpt2sas driver to pseries and ppc64 defconfig. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-19powerpc: Disable IRQs off tracer in ppc64 defconfigAnton Blanchard
The IRQs off tracer enables mcount which has a big impact on performance. Disable it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-19powerpc: Sync pseries and ppc64 defconfigsAnton Blanchard
The pseries defconfig had a number of drivers enabled and we may as well add them to the ppc64 defconfig. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-19powerpc/pseries/hvconsole: Fix dropped console outputAnton Blanchard
Return -EAGAIN when we get H_BUSY back from the hypervisor. This makes the hvc console driver retry, avoiding dropped printks. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: <stable@kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-19powerpc/kdump: Fix timeout in crash_kexec_wait_realmodeMichael Neuling
The existing code it pretty ugly. How about we clean it up even more like this? From: Anton Blanchard <anton@samba.org> We check for timeout expiry in the outer loop, but we also need to check it in the inner loop or we can lock up forever waiting for a CPU to hit real mode. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: <stable@kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-19powerpc/mm: Fix output of total_ram.Tony Breeds
On 32bit platforms that support >= 4GB memory total_ram was truncated. This creates a confusing printk: Top of RAM: 0x100000000, Total RAM: 0x0 Fix that: Top of RAM: 0x100000000, Total RAM: 0x100000000 Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-19powerpc: Correct annotations of pmu registration functionsDmitry Eremin-Solenikov
This fixes the following warning: WARNING: arch/powerpc/kernel/built-in.o(.text+0x29768): Section mismatch in reference from the function .register_power_pmu() to the function .cpuinit.text:.power_pmu_notifier() The function .register_power_pmu() references the function __cpuinit .power_pmu_notifier(). This is often because .register_power_pmu lacks a __cpuinit annotation or the annotation of .power_pmu_notifier is wrong. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-19powerpc: Remove redundant set_fs(USER_DS)Mathias Krause
The address limit is already set in flush_old_exec() so this set_fs(USER_DS) is redundant. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-18xen/multicall: move *idx fields to start of mc_bufferJeremy Fitzhardinge
The CPU would prefer small offsets. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2011-07-18xen/multicall: special-case singleton hypercallsJeremy Fitzhardinge
Singleton calls seem to end up being pretty common, so just directly call the hypercall rather than going via multicall. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2011-07-18xen/multicalls: add unlikely around slowpath in __xen_mc_entry()Jeremy Fitzhardinge
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
generated by cgit (git 2.34.1) at 2025-09-15 06:41:29 +0000