| Age | Commit message (Collapse) | Author |
|---|
|
Pull microblaze updates from Michal Simek:
"Clean up PCI support which was pretty much copied and pasted from
PowerPC long time ago for one custom platform which is not available
for years.
Also, the Xilinx/AMD PCIe team tested Microblaze with IP cores also
used on ARM SOCs and clean up Microblaze code"
* tag 'microblaze-v6.2' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze/PCI: Moving PCI iounmap and dependent code
microblaze/PCI: Remove support for Xilinx PCI host bridge
microblaze/PCI: Remove unused pci_iobar_pfn() and et al declarations
microblaze/PCI: Remove unused sys_pciconfig_iobase() and et al declaration
microblaze/PCI: Remove unused pci_address_to_pio() conversion of CPU address to I/O port
microblaze/PCI: Remove unused PCI Indirect ops
microblaze/PCI: Remove unused PCI BIOS resource allocation
microblaze/PCI: Remove unused allocation & free of PCI host bridge structure
microblaze/PCI: Remove unused device tree parsing for a host bridge resources
microblaze/PCI: Remove unused PCI legacy IO's access on a bus
microblaze/PCI: Remove unused PCI bus scan if configured as a host
microblaze/PCI: Remove Null PCI config access unused functions
microblaze/PCI: Remove unused early_read_config_byte() et al declarations
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Drop unregister syscore from hyperv_cleanup to avoid hang (Gaurav
Kohli)
- Clean up panic path for Hyper-V framebuffer (Guilherme G. Piccoli)
- Allow IRQ remapping to work without x2apic (Nuno Das Neves)
- Fix comments (Olaf Hering)
- Expand hv_vp_assist_page definition (Saurabh Sengar)
- Improvement to page reporting (Shradha Gupta)
- Make sure TSC clocksource works when Linux runs as the root partition
(Stanislav Kinsburskiy)
* tag 'hyperv-next-signed-20221208' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Remove unregister syscore call from Hyper-V cleanup
iommu/hyper-v: Allow hyperv irq remapping without x2apic
clocksource: hyper-v: Add TSC page support for root partition
clocksource: hyper-v: Use TSC PFN getter to map vvar page
clocksource: hyper-v: Introduce TSC PFN getter
clocksource: hyper-v: Introduce a pointer to TSC page
x86/hyperv: Expand definition of struct hv_vp_assist_page
PCI: hv: update comment in x86 specific hv_arch_irq_unmask
hv: fix comment typo in vmbus_channel/low_latency
drivers: hv, hyperv_fb: Untangle and refactor Hyper-V panic notifiers
video: hyperv_fb: Avoid taking busy spinlock on panic path
hv_balloon: Add support for configurable order free page reporting
mm/page_reporting: Add checks for page_reporting_order param
|
|
Palmer Dabbelt <palmer@rivosinc.com> says:
This contains a pair of cleanups that depend on a fix that has already
landed upstream.
* b4-shazam-merge:
RISC-V: Add some comments about the shadow and overflow stacks
RISC-V: Align the shadow stack
riscv: fix race when vmap stack overflow
Link: https://lore.kernel.org/r/20221130023515.20217-1-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
It took me a while to page all this back in when trying to review the
recent spin_shadow_stack, so I figured I'd just write up some comments.
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20221130023515.20217-2-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The standard RISC-V ABIs all require 16-byte stack alignment. We're
only calling that one function on the shadow stack so I doubt it'd
result in a real issue, but might as well keep this lined up.
Fixes: 31da94c25aea ("riscv: add VMAP_STACK overflow detection")
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20221130023515.20217-1-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- SLOB deprecation and SLUB_TINY
The SLOB allocator adds maintenance burden and stands in the way of
API improvements [1]. Deprecate it by renaming the config option (to
make users notice) to CONFIG_SLOB_DEPRECATED with updated help text.
SLUB should be used instead as SLAB will be the next on the removal
list.
Based on reports from a riscv k210 board with 8MB RAM, add a
CONFIG_SLUB_TINY option to minimize SLUB's memory usage at the
expense of scalability. This has resolved the k210 regression [2] so
in case there are no others (that wouldn't be resolvable by further
tweaks to SLUB_TINY) plan is to remove SLOB in a few cycles.
Existing defconfigs with CONFIG_SLOB are converted to
CONFIG_SLUB_TINY.
- kmalloc() slub_debug redzone improvements
A series from Feng Tang that builds on the tracking or requested size
for kmalloc() allocations (for caches with debugging enabled) added
in 6.1, to make redzone checks consider the requested size and not
the rounded up one, in order to catch more subtle buffer overruns.
Includes new slub_kunit test.
- struct slab fields reordering to accomodate larger rcu_head
RCU folks would like to grow rcu_head with debugging options, which
breaks current struct slab layout's assumptions, so reorganize it to
make this possible.
- Miscellaneous improvements/fixes:
- __alloc_size checking compiler workaround (Kees Cook)
- Optimize and cleanup SLUB's sysfs init (Rasmus Villemoes)
- Make SLAB compatible with PROVE_RAW_LOCK_NESTING (Jiri Kosina)
- Correct SLUB's percpu allocation estimates (Baoquan He)
- Re-enableS LUB's run-time failslab sysfs control (Alexander Atanasov)
- Make tools/vm/slabinfo more user friendly when not run as root (Rong Tao)
- Dead code removal in SLUB (Hyeonggon Yoo)
* tag 'slab-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (31 commits)
mm, slob: rename CONFIG_SLOB to CONFIG_SLOB_DEPRECATED
mm, slub: don't aggressively inline with CONFIG_SLUB_TINY
mm, slub: remove percpu slabs with CONFIG_SLUB_TINY
mm, slub: split out allocations from pre/post hooks
mm/slub, kunit: Add a test case for kmalloc redzone check
mm/slub, kunit: add SLAB_SKIP_KFENCE flag for cache creation
mm, slub: refactor free debug processing
mm, slab: ignore SLAB_RECLAIM_ACCOUNT with CONFIG_SLUB_TINY
mm, slub: don't create kmalloc-rcl caches with CONFIG_SLUB_TINY
mm, slub: lower the default slub_max_order with CONFIG_SLUB_TINY
mm, slub: retain no free slabs on partial list with CONFIG_SLUB_TINY
mm, slub: disable SYSFS support with CONFIG_SLUB_TINY
mm, slub: add CONFIG_SLUB_TINY
mm, slab: ignore hardened usercopy parameters when disabled
slab: Remove special-casing of const 0 size allocations
slab: Clean up SLOB vs kmalloc() definition
mm/sl[au]b: rearrange struct slab fields to allow larger rcu_head
mm/migrate: make isolate_movable_page() skip slab pages
mm/slab: move and adjust kernel-doc for kmem_cache_alloc
mm/slub, percpu: correct the calculation of early percpu allocation size
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Add NMI-safe SRCU reader API. It uses atomic_inc() instead of
this_cpu_inc() on strong load-store architectures.
- Introduce new console_list_lock to synchronize a manipulation of the
list of registered consoles and their flags.
This is a first step in removing the big-kernel-lock-like behavior of
console_lock(). This semaphore still serializes console->write()
calbacks against:
- each other. It primary prevents potential races between early
and proper console drivers using the same device.
- suspend()/resume() callbacks and init() operations in some
drivers.
- various other operations in the tty/vt and framebufer
susbsystems. It is likely that console_lock() serializes even
operations that are not directly conflicting with the
console->write() callbacks here. This is the most complicated
big-kernel-lock aspect of the console_lock() that will be hard
to untangle.
- Introduce new console_srcu lock that is used to safely iterate and
access the registered console drivers under SRCU read lock.
This is a prerequisite for introducing atomic console drivers and
console kthreads. It will reduce the complexity of serialization
against normal consoles and console_lock(). Also it should remove the
risk of deadlock during critical situations, like Oops or panic, when
only atomic consoles are registered.
- Check whether the console is registered instead of enabled on many
locations. It was a historical leftover.
- Cleanly force a preferred console in xenfb code instead of a dirty
hack.
- A lot of code and comment clean ups and improvements.
* tag 'printk-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (47 commits)
printk: htmldocs: add missing description
tty: serial: sh-sci: use setup() callback for early console
printk: relieve console_lock of list synchronization duties
tty: serial: kgdboc: use console_list_lock to trap exit
tty: serial: kgdboc: synchronize tty_find_polling_driver() and register_console()
tty: serial: kgdboc: use console_list_lock for list traversal
tty: serial: kgdboc: use srcu console list iterator
proc: consoles: use console_list_lock for list iteration
tty: tty_io: use console_list_lock for list synchronization
printk, xen: fbfront: create/use safe function for forcing preferred
netconsole: avoid CON_ENABLED misuse to track registration
usb: early: xhci-dbc: use console_is_registered()
tty: serial: xilinx_uartps: use console_is_registered()
tty: serial: samsung_tty: use console_is_registered()
tty: serial: pic32_uart: use console_is_registered()
tty: serial: earlycon: use console_is_registered()
tty: hvc: use console_is_registered()
efi: earlycon: use console_is_registered()
tty: nfcon: use console_is_registered()
serial_core: replace uart_console_enabled() with uart_console_registered()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zx2c4/linux
Pull unsigned-char conversion from Jason Donenfeld:
"Enable -funsigned-char and fix code affected by that flag.
During the 6.1 cycle, several patches already made it into the tree,
which were for code that was already broken on at least one
architecture, where the naked char had a different sign than the code
author anticipated, or were part of some bug fix for an existing bug
that this initiative unearthed.
These 6.1-era fixes are:
648060902aa3 ("MIPS: pic32: treat port as signed integer")
5c26159c97b3 ("ipvs: use explicitly signed chars")
e6cb8769452e ("wifi: airo: do not assign -1 to unsigned char")
937ec9f7d5f2 ("staging: rtl8192e: remove bogus ssid character sign test")
677047383296 ("misc: sgi-gru: use explicitly signed char")
50895a55bcfd ("ALSA: rme9652: use explicitly signed char")
ee03c0f200eb ("ALSA: au88x0: use explicitly signed char")
835bed1b8395 ("fbdev: sisfb: use explicitly signed char")
50f19697dd76 ("parisc: Use signed char for hardware path in pdc.h")
66063033f77e ("wifi: rt2x00: use explicitly signed or unsigned types")
Regarding patches in this pull:
- There is one patch in this pull that should have made it to you
during 6.1 ("media: stv0288: use explicitly signed char"), but the
maintainer was MIA during the cycle, so it's in here instead.
- Two patches fix single architecture code affected by unsigned char
("perf/x86: Make struct p4_event_bind::cntr signed array" and
"sparc: sbus: treat CPU index as integer"), while one patch fixes
an unused typedef, in case it's ever used in the future ("media:
atomisp: make hive_int8 explictly signed").
- Finally, there's the change to actually enable -funsigned-char
("kbuild: treat char as always unsigned") and then the removal of
some no longer useful !__CHAR_UNSIGNED__ selftest code ("lib:
assume char is unsigned").
The various fixes were found with a combination of diffing objdump
output, a large variety of Coccinelle scripts, and plain old grep. In
the end, things didn't seem as bad as I feared they would. But of
course, it's also possible I missed things.
However, this has been in linux-next for basically an entire cycle
now, so I'm not overly worried. I've also been daily driving this on
my laptop for all of 6.1. Still, this series, and the ones sent for
6.1 don't total in quantity to what I thought it'd be, so I will be on
the lookout for breakage.
We could receive a few reports that are quickly fixable. Hopefully we
won't receive a barrage of reports that would result in a revert. And
just maybe we won't receive any reports at all and nobody will even
notice. Knock on wood"
* tag 'unsigned-char-6.2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/zx2c4/linux:
lib: assume char is unsigned
kbuild: treat char as always unsigned
media: atomisp: make hive_int8 explictly signed
media: stv0288: use explicitly signed char
sparc: sbus: treat CPU index as integer
perf/x86: Make struct p4_event_bind::cntr signed array
|
|
Now that kmmio uses rcu_read_lock_sched_notrace() there's no reason to
call preempt_disable() as the read_lock_sched_notrace() already does that
and is redundant.
This also removes the preempt_enable_no_resched() as the "no_resched()"
portion was bogus as there's no reason to do that.
Link: https://lkml.kernel.org/r/20221212103703.7129cc5d@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "x86@kernel.org" <x86@kernel.org>
Cc: Karol Herbst <karolherbst@gmail.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Documentation updates. This is the second in a series from an ongoing
review of the RCU documentation.
- Miscellaneous fixes.
- Introduce a default-off Kconfig option that depends on RCU_NOCB_CPU
that, on CPUs mentioned in the nohz_full or rcu_nocbs boot-argument
CPU lists, causes call_rcu() to introduce delays.
These delays result in significant power savings on nearly idle
Android and ChromeOS systems. These savings range from a few percent
to more than ten percent.
This series also includes several commits that change call_rcu() to a
new call_rcu_hurry() function that avoids these delays in a few
cases, for example, where timely wakeups are required. Several of
these are outside of RCU and thus have acks and reviews from the
relevant maintainers.
- Create an srcu_read_lock_nmisafe() and an srcu_read_unlock_nmisafe()
for architectures that support NMIs, but which do not provide
NMI-safe this_cpu_inc(). These NMI-safe SRCU functions are required
by the upcoming lockless printk() work by John Ogness et al.
- Changes providing minor but important increases in torture test
coverage for the new RCU polled-grace-period APIs.
- Changes to torturescript that avoid redundant kernel builds, thus
providing about a 30% speedup for the torture.sh acceptance test.
* tag 'rcu.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (49 commits)
net: devinet: Reduce refcount before grace period
net: Use call_rcu_hurry() for dst_release()
workqueue: Make queue_rcu_work() use call_rcu_hurry()
percpu-refcount: Use call_rcu_hurry() for atomic switch
scsi/scsi_error: Use call_rcu_hurry() instead of call_rcu()
rcu/rcutorture: Use call_rcu_hurry() where needed
rcu/rcuscale: Use call_rcu_hurry() for async reader test
rcu/sync: Use call_rcu_hurry() instead of call_rcu
rcuscale: Add laziness and kfree tests
rcu: Shrinker for lazy rcu
rcu: Refactor code a bit in rcu_nocb_do_flush_bypass()
rcu: Make call_rcu() lazy to save power
rcu: Implement lockdep_rcu_enabled for !CONFIG_DEBUG_LOCK_ALLOC
srcu: Debug NMI safety even on archs that don't require it
srcu: Explain the reason behind the read side critical section on GP start
srcu: Warn when NMI-unsafe API is used in NMI
arch/s390: Add ARCH_HAS_NMI_SAFE_THIS_CPU_OPS Kconfig option
arch/loongarch: Add ARCH_HAS_NMI_SAFE_THIS_CPU_OPS Kconfig option
rcu: Fix __this_cpu_read() lockdep warning in rcu_force_quiescent_state()
rcu-tasks: Make grace-period-age message human-readable
...
|
|
Merge cpufreq changes for 6.2-rc1:
- Generalize of_perf_domain_get_sharing_cpumask phandle format (Hector
Martin).
- Add new cpufreq driver for Apple SoC CPU P-states (Hector Martin).
- Update Qualcomm cpufreq driver, including:
* CPU clock provider support,
* Generic cleanups or reorganization.
* Potential memleak fix.
* Fix of the return value of cpufreq_driver->get().
(Manivannan Sadhasivam, Chen Hui).
- Update Qualcomm cpufreq driver's DT bindings, including:
* Support for CPU clock provider.
* Missing cache-related properties fixes.
* Support for QDU1000/QRU1000.
(Manivannan Sadhasivam, Rob Herring, Melody Olvera).
- Add support for ti,am625 SoC and enable build of ti-cpufreq for
ARCH_K3 (Dave Gerlach, and Vibhore Vardhan).
- Use flexible array to simplify memory allocation in the tegra186
cpufreq driver (Christophe JAILLET).
- Convert cpufreq statistics code to use sysfs_emit_at() (ye xingchen).
- Allow intel_pstate to use no-HWP mode on Sapphire Rapids (Giovanni
Gherdovich).
- Add missing pci_dev_put() to the amd_freq_sensitivity cpufreq driver
(Xiongfeng Wang).
- Initialize the kobj_unregister completion before calling
kobject_init_and_add() in the cpufreq core code (Yongqiang Liu).
- Defer setting boost MSRs in the ACPI cpufreq driver (Stuart Hayes,
Nathan Chancellor).
- Make intel_pstate accept initial EPP value of 0x80 (Srinivas
Pandruvada).
- Make read-only array sys_clk_src in the SPEAr cpufreq driver static
(Colin Ian King).
- Make array speeds in the longhaul cpufreq driver static (Colin Ian
King).
- Use str_enabled_disabled() helper in the ACPI cpufreq driver (Andy
Shevchenko).
- Drop a reference to CVS from cpufreq documentation (Conghui Wang).
* pm-cpufreq: (30 commits)
cpufreq: Remove CVS version control contents from documentation
cpufreq: stats: Convert to use sysfs_emit_at() API
cpufreq: ACPI: Only set boost MSRs on supported CPUs
dt-bindings: cpufreq: cpufreq-qcom-hw: Add QDU1000/QRU1000 cpufreq
cpufreq: tegra186: Use flexible array to simplify memory allocation
cpufreq: intel_pstate: Add Sapphire Rapids support in no-HWP mode
cpufreq: amd_freq_sensitivity: Add missing pci_dev_put()
cpufreq: Init completion before kobject_init_and_add()
cpufreq: apple-soc: Add new driver to control Apple SoC CPU P-states
cpufreq: qcom-hw: Add CPU clock provider support
dt-bindings: cpufreq: cpufreq-qcom-hw: Add cpufreq clock provider
cpufreq: qcom-hw: Fix the frequency returned by cpufreq_driver->get()
cpufreq: ACPI: Remove unused variables 'acpi_cpufreq_online' and 'ret'
cpufreq: qcom-hw: Fix memory leak in qcom_cpufreq_hw_read_lut()
arm64: dts: ti: k3-am625-sk: Add 1.4GHz OPP
cpufreq: ti: Enable ti-cpufreq for ARCH_K3
arm64: dts: ti: k3-am625: Introduce operating-points table
cpufreq: dt-platdev: Blacklist ti,am625 SoC
cpufreq: ti-cpufreq: Add support for AM625
dt-bindings: cpufreq: qcom: Add missing cache related properties
...
|
|
Merge ACPI changes related to device enumeration, device object
managenet, operation region handling, table parsing and sysfs
interface:
- Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device
enumeration code (Giulio Benetti).
- Change the return type of the ACPI driver remove callback to void and
update its users accordingly (Dawei Li).
- Add general support for FFH address space type and implement the low-
level part of it for ARM64 (Sudeep Holla).
- Fix stale comments in the ACPI tables parsing code and make it print
more messages related to MADT (Hanjun Guo, Huacai Chen).
- Replace invocations of generic library functions with more kernel-
specific counterparts in the ACPI sysfs interface (Christophe JAILLET,
Xu Panda).
* acpi-scan:
ACPI: scan: substitute empty_zero_page with helper ZERO_PAGE(0)
* acpi-bus:
ACPI: FFH: Silence missing prototype warnings
ACPI: make remove callback of ACPI driver void
ACPI: bus: Fix the _OSC capability check for FFH OpRegion
arm64: Add architecture specific ACPI FFH Opregion callbacks
ACPI: Implement a generic FFH Opregion handler
* acpi-tables:
ACPI: tables: Fix the stale comments for acpi_locate_initial_tables()
ACPI: tables: Print CORE_PIC information when MADT is parsed
* acpi-sysfs:
ACPI: sysfs: use sysfs_emit() to instead of scnprintf()
ACPI: sysfs: Use kstrtobool() instead of strtobool()
|
|
Merge ACPICA changes, including bug fixes and cleanups as well as support
for some recently defined data structures, for 6.2-rc1:
- Make acpi_ex_load_op() match upstream implementation (Rafael Wysocki).
- Add support for loong_arch-specific APICs in MADT (Huacai Chen).
- Add support for fixed PCIe wake event (Huacai Chen).
- Add EBDA pointer sanity checks (Vit Kabele).
- Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele).
- Add CCEL table support to both compiler/disassembler (Kuppuswamy
Sathyanarayanan).
- Add a couple of new UUIDs to the known UUID list (Bob Moore).
- Add support for FFH Opregion special context data (Sudeep Holla).
- Improve warning message for "invalid ACPI name" (Bob Moore).
- Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT table
(Alison Schofield).
- Prepare IORT support for revision E.e (Robin Murphy).
- Finish support for the CDAT table (Bob Moore).
- Fix error code path in acpi_ds_call_control_method() (Rafael Wysocki).
- Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li Zetao).
- Update the version of the ACPICA code in the kernel (Bob Moore).
* acpica:
ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()
ACPICA: Fix error code path in acpi_ds_call_control_method()
ACPICA: Update version to 20221020
ACPICA: Add utcksum.o to the acpidump Makefile
Revert "LoongArch: Provisionally add ACPICA data structures"
ACPICA: Finish support for the CDAT table
ACPICA: IORT: Update for revision E.e
ACPICA: Add CXL 3.0 structures (CXIMS & RDPAS) to the CEDT table
ACPICA: Improve warning message for "invalid ACPI name"
ACPICA: Add support for FFH Opregion special context data
ACPICA: Add a couple of new UUIDs to the known UUID list
ACPICA: iASL: Add CCEL table to both compiler/disassembler
ACPICA: Do not touch VGA memory when EBDA < 1ki_b
ACPICA: Check that EBDA pointer is in valid memory
ACPICA: Events: Support fixed PCIe wake event
ACPICA: MADT: Add loong_arch-specific APICs support
ACPICA: Make acpi_ex_load_op() match upstream
|
|
The feature of minimizing overhead of struct page associated with each
HugeTLB page is implemented on x86_64. However, the infrastructure of
this feature is already there, so just select ARCH_WANT_HUGETLB_PAGE_
OPTIMIZE_VMEMMAP is enough to enable this feature for LoongArch.
Link: https://lkml.kernel.org/r/20221027125253.3458989-5-chenhuacai@loongson.cn
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Min Zhou <zhoumin@loongson.cn>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Will Deacon <will@kernel.org>
Cc: Xuefeng Li <lixuefeng@loongson.cn>
Cc: Xuerui Wang <kernel@xen0n.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Generalise vmemmap_populate_hugepages() so ARM64 & X86 & LoongArch can
share its implementation.
Link: https://lkml.kernel.org/r/20221027125253.3458989-4-chenhuacai@loongson.cn
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Min Zhou <zhoumin@loongson.cn>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Xuefeng Li <lixuefeng@loongson.cn>
Cc: Xuerui Wang <kernel@xen0n.name>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add sparse memory vmemmap support for LoongArch. SPARSEMEM_VMEMMAP uses a
virtually mapped memmap to optimise pfn_to_page and page_to_pfn
operations. This is the most efficient option when sufficient kernel
resources are available.
Link: https://lkml.kernel.org/r/20221027125253.3458989-3-chenhuacai@loongson.cn
Signed-off-by: Min Zhou <zhoumin@loongson.cn>
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Will Deacon <will@kernel.org>
Cc: Xuefeng Li <lixuefeng@loongson.cn>
Cc: Xuerui Wang <kernel@xen0n.name>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/sparse-vmemmap: Generalise helpers and enable for
LoongArch", v14.
This series is in order to enable sparse-vmemmap for LoongArch. But
LoongArch cannot use generic helpers directly because MIPS&LoongArch need
to call pgd_init()/pud_init()/pmd_init() when populating page tables. So
we adjust the prototypes of p?d_init() to make generic helpers can call
them, then enable sparse-vmemmap with generic helpers, and to be further,
generalise vmemmap_populate_hugepages() for ARM64, X86 and LoongArch.
This patch (of 4):
We are preparing to add sparse vmemmap support to LoongArch. MIPS and
LoongArch need to call pgd_init()/pud_init()/pmd_init() when populating
page tables, so adjust their prototypes to make generic helpers can call
them.
NIOS2 declares pmd_init() but doesn't use, just remove it to avoid build
errors.
Link: https://lkml.kernel.org/r/20221027125253.3458989-1-chenhuacai@loongson.cn
Link: https://lkml.kernel.org/r/20221027125253.3458989-2-chenhuacai@loongson.cn
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Will Deacon <will@kernel.org>
Cc: Xuefeng Li <lixuefeng@loongson.cn>
Cc: Xuerui Wang <kernel@xen0n.name>
Cc: Min Zhou <zhoumin@loongson.cn>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Some 32-bit configurations don't pull in the spin_begin/end/relax
definitions. Fix is to restore a lost include.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 84990b169557 ("powerpc/qspinlock: add mcs queueing for contended waiters")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/oe-kbuild-all/202212050224.i7uh9fOh-lkp@intel.com
Link: https://lore.kernel.org/r/20221208123225.1566113-1-npiggin@gmail.com
|
|
The mmiotrace tracer is "special". The purpose is to help reverse engineer
binary drivers by removing the memory allocated by the driver and when the
driver goes to access it, a fault occurs, the mmiotracer will record what
the driver was doing and then do the work on its behalf by single stepping
through the process.
But to achieve this ability, it must do some special things. One is to
take the rcu_read_lock() when the fault occurs, and then release it in the
breakpoint that is single stepping. This makes lockdep unhappy, as it
changes the state of RCU from within an exception that is not contained in
that exception, and we get a nasty splat from lockdep.
Instead, switch to rcu_read_lock_sched_notrace() as the RCU sched variant
has the same grace period as normal RCU. This is basically the same as
rcu_read_lock() but does not make lockdep complain about it.
Note, the preempt_disable() is still needed as it uses preempt_enable_no_resched().
Link: https://lore.kernel.org/linux-trace-kernel/20221209134144.04f33626@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Karol Herbst <karolherbst@gmail.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Pull ARM fix from Russell King:
"One further ARM fix for 6.1 from Wang Kefeng, fixing up the handling
for kfence faults"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9278/1: kfence: only handle translation faults
|
|
Use pr_info() and similar when possible. No functional change intended.
Link: https://lore.kernel.org/r/20221209205131.GA1726524@bhelgaas
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Add missing word in the log message:
- ... so future kernels can this automatically
+ ... so future kernels can do this automatically
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20221208190341.1560157-5-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
|
|
These messages:
clipped [mem size 0x00000000 64bit] to [mem size 0xfffffffffffa0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff]
aren't as useful as they could be because (a) the resource is often
IORESOURCE_UNSET, so we print the size instead of the start/end and (b) we
print the available resource even if it is empty after removing the E820
entry.
Print the available space by hand to avoid the IORESOURCE_UNSET problem and
only if it's non-empty. No functional change intended.
Link: https://lore.kernel.org/r/20221208190341.1560157-4-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
|
|
Firmware can use EfiMemoryMappedIO to request that MMIO regions be mapped
by the OS so they can be accessed by EFI runtime services, but should have
no other significance to the OS (UEFI r2.10, sec 7.2). However, most
bootloaders and EFI stubs convert EfiMemoryMappedIO regions to
E820_TYPE_RESERVED entries, which prevent Linux from allocating space from
them (see remove_e820_regions()).
Some platforms use EfiMemoryMappedIO entries for PCI MMCONFIG space and PCI
host bridge windows, which means Linux can't allocate BAR space for
hot-added devices.
Remove large EfiMemoryMappedIO regions from the E820 map to avoid this
problem.
Leave small (< 256KB) EfiMemoryMappedIO regions alone because on some
platforms, these describe non-window space that's included in host bridge
_CRS. If we assign that space to PCI devices, they don't work. On the
Lenovo X1 Carbon, this leads to suspend/resume failures.
The previous solution to the problem of allocating BARs in these regions
was to add pci_crs_quirks[] entries to disable E820 checking for these
machines (see d341838d776a ("x86/PCI: Disable E820 reserved region clipping
via quirks")):
Acer DMI_PRODUCT_NAME Spin SP513-54N
Clevo DMI_BOARD_NAME X170KM-G
Lenovo DMI_PRODUCT_VERSION *IIL*
Florent reported the BAR allocation issue on the Clevo NL4XLU. We could
add another quirk for the NL4XLU, but I hope this generic change can solve
it for many machines without having to add quirks.
This change has been tested on Clevo X170KM-G (Konrad) and Lenovo Ideapad
Slim 3 (Matt) and solves the problem even when overriding the existing
quirks by booting with "pci=use_e820".
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216565 Clevo NL4XLU
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206459#c78 Clevo X170KM-G
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1868899 Ideapad Slim 3
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2029207 X1 Carbon
Link: https://lore.kernel.org/r/20221208190341.1560157-2-helgaas@kernel.org
Reported-by: Florent DELAHAYE <kernelorg@undead.fr>
Tested-by: Konrad J Hambrick <kjhambrick@gmail.com>
Tested-by: Matt Hansen <2lprbe78@duck.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
|
|
The mmiotrace tracer is "special". The purpose is to help reverse engineer
binary drivers by removing the memory allocated by the driver and when the
driver goes to access it, a fault occurs, the mmiotracer will record what
the driver was doing and then do the work on its behalf by single stepping
through the process.
But to achieve this ability, it must do some special things. One is it
needs to grab a lock while in the breakpoint handler. This is considered
an NMI state, and then lockdep warns that the lock is being held in both
an NMI state (really a breakpoint handler) and also in normal context.
As the breakpoint/NMI state only happens when the driver is accessing
memory, there's no concern of a race condition against the setup and
tear-down of mmiotracer.
To make lockdep and mmiotrace work together, convert the locks used in the
breakpoint handler into arch_spin_lock().
Link: https://lkml.kernel.org/r/20221206191229.656244029@goodmis.org
Link: https://lore.kernel.org/lkml/20221201213126.620b7dd3@gandalf.local.home/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Karol Herbst <karolherbst@gmail.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Andrew Jones <ajones@ventanamicro.com> says:
This series is a collection of cleanups for alternative-macros.h with
the main motivation being that adding new ALTERNATIVE_3, ALTERNATIVE_4,
... will be possible without lots of bloat.
* b4-shazam-merge:
riscv: Don't duplicate _ALTERNATIVE_CFG* macros
riscv: alternatives: Drop the underscores from the assembly macro names
riscv: alternatives: Don't name unused macro parameters
riscv: Don't duplicate __ALTERNATIVE_CFG in __ALTERNATIVE_CFG_2
Link: https://lore.kernel.org/r/20221129150053.50464-1-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Andrew Jones <ajones@ventanamicro.com> says:
When a DT puts zicbom in the isa string, but does not provide a block
size, ALT_CMO_OP() will attempt to do cache operations on address
zero since the start address will be ANDed with zero. We can't simply
BUG() in riscv_init_cbom_blocksize() when we fail to find a block
size because the failure will happen before logging works, leaving
users to scratch their heads as to why the boot hung. Instead, ensure
Zicbom is disabled and output an error which will hopefully alert
people that the DT needs to be fixed. While at it, add a check that
the block size is a power-of-2 too.
* b4-shazam-merge:
RISC-V: Ensure Zicbom has a valid block size
RISC-V: Introduce riscv_isa_extension_check
RISC-V: Improve use of isa2hwcap[]
Link: https://lore.kernel.org/r/20221129143447.49714-1-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When a DT puts zicbom in the isa string, but does not provide a block
size, ALT_CMO_OP() will attempt to do cache operations on address
zero since the start address will be ANDed with zero. We can't simply
BUG() in riscv_init_cbom_blocksize() when we fail to find a block
size because the failure will happen before logging works, leaving
users to scratch their heads as to why the boot hung. Instead, ensure
Zicbom is disabled and output an error which will hopefully alert
people that the DT needs to be fixed. While at it, add a check that
the block size is a power-of-2 too.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20221129143447.49714-4-ajones@ventanamicro.com
[Palmer: base on 5c20a3a9df19 ("RISC-V: Fix compilation without RISCV_ISA_ZICBOM"]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Currently any isa extension found in the isa string is set in the
isa bitmap. An isa extension set in the bitmap indicates that the
extension is present and may be used (a.k.a is enabled). However,
when an extension cannot be used due to missing dependencies or
errata it should not be added to the bitmap. Introduce a function
where additional checks may be placed in order to determine if an
extension should be enabled or not.
Note, the checks may simply indicate an issue with the DT, but,
since extensions may be used in early boot, it's not always possible
to simply produce an error at the point the issue is determined.
It's best to keep the extension disabled and produce an error.
No functional change intended, as the function is only introduced
and always returns true. A later patch will provide checks for an
isa extension.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20221129143447.49714-3-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Improve isa2hwcap[] by removing it from static storage, as
riscv_fill_hwcap() is only called once, and by reducing its size
from 256 bytes to 26. The latter improvement is possible because
isa2hwcap[] will never be indexed with capital letters and we can
precompute the offsets from 'a'.
No functional change intended.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20221129143447.49714-2-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Reduce clutter by only defining the _ALTERNATIVE_CFG* macros once,
rather than once for assembly and once for C. To do that, we need to
add __ALTERNATIVE_CFG* macros to the assembly side, but those are
one-liners. Also take the opportunity to do a bit of reformatting,
taking full advantage of the fact checkpatch gives us 100 char lines.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221129150053.50464-5-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The underscores aren't needed because there isn't anything already
named without them and the _CFG extension. This is a bit of a cleanup
by itself, but the real motivation is for a coming patch which would
otherwise need to add two more underscores to these macro names,
i.e. ____ALTERNATIVE_CFG, and that'd be gross.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221129150053.50464-4-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Without CONFIG_RISCV_ALTERNATIVE only the first parameter of the
ALTERNATIVE macros is needed. Use ... for the rest to cut down on
clutter. While there, fix a couple space vs. tab issues.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221129150053.50464-3-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Build __ALTERNATIVE_CFG_2 by adding on to __ALTERNATIVE_CFG rather
than duplicating it.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221129150053.50464-2-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Avoid flooding kernel log with warnings.
Fixes: 2c0756d306c2 ("MIPS: OCTEON: warn if deprecated link status is being used")
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Check clk for NULL before calling clk_enable_unlocked where clk
is dereferenced. There is such check in other implementations
of clk_enable.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: e7300d04bd08 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs.")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Modify the best_map_size function to give map_size many times instead
of only once, so a memory region can be mapped by both PMD_SIZE and
PAGE_SIZE.
Signed-off-by: Qinglin Pan <panqinglin2020@iscas.ac.cn>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20221128023643.329091-1-panqinglin2020@iscas.ac.cn
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fix from Arnd Bergmann:
"One more last minute revert for a boot regression that was found on
the popular colibri-imx7"
* tag 'soc-fixes-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
Revert "ARM: dts: imx7: Fix NAND controller size-cells"
|
|
After someone reported a bug report with a failed modification due to the
expected value not matching what was found, it came to my attention that
the ftrace_expected is no longer set when that happens. This makes for
debugging the issue a bit more difficult.
Set ftrace_expected to the expected code before calling ftrace_bug, so
that it shows what was expected and why it failed.
Link: https://lore.kernel.org/all/CA+wXwBQ-VhK+hpBtYtyZP-NiX4g8fqRRWithFOHQW-0coQ3vLg@mail.gmail.com/
Link: https://lore.kernel.org/linux-trace-kernel/20221209105247.01d4e51d@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "x86@kernel.org" <x86@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 768ae4406a5c ("x86/ftrace: Use text_poke()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Recently, ld.lld moved from '--undefined-version' to
'--no-undefined-version' as the default, which breaks building the vDSO
when CONFIG_X86_SGX is not set:
ld.lld: error: version script assignment of 'LINUX_2.6' to symbol '__vdso_sgx_enter_enclave' failed: symbol not defined
__vdso_sgx_enter_enclave is only included in the vDSO when
CONFIG_X86_SGX is set. Only export it if it will be present in the final
object, which clears up the error.
Fixes: 8466436952017 ("x86/vdso: Implement a vDSO for Intel SGX enclave call")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1756
Link: https://lore.kernel.org/r/20221109000306.1407357-1-nathan@kernel.org
|
|
Use the frame_push and frame_pop macros to set up the stack frame so
that return address protections will be enabled automically when
configured.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the frame_push and frame_pop macros to set up the stack frame so
that return address protections will be enabled automically when
configured.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the frame_push and frame_pop macros to create the stack frames in
the AES chaining mode wrappers so that they will get PAC and/or shadow
call stack protection when configured.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the frame_push and frame_pop macros consistently to create the stack
frame, so that we will get PAC and/or shadow call stack handling as well
when enabled.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.2
- Enable the per-vcpu dirty-ring tracking mechanism, together with an
option to keep the good old dirty log around for pages that are
dirtied by something other than a vcpu.
- Switch to the relaxed parallel fault handling, using RCU to delay
page table reclaim and giving better performance under load.
- Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping
option, which multi-process VMMs such as crosvm rely on.
- Merge the pKVM shadow vcpu state tracking that allows the hypervisor
to have its own view of a vcpu, keeping that state private.
- Add support for the PMUv3p5 architecture revision, bringing support
for 64bit counters on systems that support it, and fix the
no-quite-compliant CHAIN-ed counter support for the machines that
actually exist out there.
- Fix a handful of minor issues around 52bit VA/PA support (64kB pages
only) as a prefix of the oncoming support for 4kB and 16kB pages.
- Add/Enable/Fix a bunch of selftests covering memslots, breakpoints,
stage-2 faults and access tracking. You name it, we got it, we
probably broke it.
- Pick a small set of documentation and spelling fixes, because no
good merge window would be complete without those.
As a side effect, this tag also drags:
- The 'kvmarm-fixes-6.1-3' tag as a dependency to the dirty-ring
series
- A shared branch with the arm64 tree that repaints all the system
registers to match the ARM ARM's naming, and resulting in
interesting conflicts
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These are fixes, but due to the possible early boot fallout they're
going in the merge window to get a bit more time to bake on linux-next.
* b4-shazam-merge
riscv: Move cast inside kernel_mapping_[pv]a_to_[vp]a
riscv: Fix crash during early errata patching
Link: https://lore.kernel.org/r/20221126060920.65009-1-samuel@sholland.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Before commit 44c922572952 ("RISC-V: enable XIP"), these macros cast
their argument to unsigned long. That commit moved the cast after an
assignment to an unsigned long variable, rendering it ineffectual.
Move the cast back, so we can remove the cast at each call site.
Reviewed-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221126060920.65009-2-samuel@sholland.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The patch function for the T-Head PBMT errata calls __pa_symbol() before
relocation. This crashes when CONFIG_DEBUG_VIRTUAL is enabled, because
__pa_symbol() forwards to __phys_addr_symbol(), and __phys_addr_symbol()
checks against the absolute kernel start/end address.
Fix this by checking against the kernel map instead of a symbol address.
Fixes: a35707c3d850 ("riscv: add memory-type errata for T-Head")
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221126060920.65009-1-samuel@sholland.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Support build the zstd compressed Image.zst. Similar as other
compressed formats, the Image.zst is not self-decompressing and
the bootloader still needs to handle decompression before
launching the kernel image.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20221123150257.3108-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
