summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2017-02-10x86/mm/ptdump: Fix soft lockup in page table walkerAndrey Ryabinin
CONFIG_KASAN=y needs a lot of virtual memory mapped for its shadow. In that case ptdump_walk_pgd_level_core() takes a lot of time to walk across all page tables and doing this without a rescheduling causes soft lockups: NMI watchdog: BUG: soft lockup - CPU#3 stuck for 23s! [swapper/0:1] ... Call Trace: ptdump_walk_pgd_level_core+0x40c/0x550 ptdump_walk_pgd_level_checkwx+0x17/0x20 mark_rodata_ro+0x13b/0x150 kernel_init+0x2f/0x120 ret_from_fork+0x2c/0x40 I guess that this issue might arise even without KASAN on huge machines with several terabytes of RAM. Stick cond_resched() in pgd loop to fix this. Reported-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Alexander Potapenko <glider@google.com> Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20170210095405.31802-1-aryabinin@virtuozzo.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-02-10x86/tsc: Make the TSC ADJUST sanitizing work for tsc_reliableThomas Gleixner
When the TSC is marked reliable then the synchronization check is skipped, but that also skips the TSC ADJUST sanitizing code. So on a machine with a wreckaged BIOS the TSC deviation between CPUs might go unnoticed. Let the TSC adjust sanitizing code run unconditionally and just skip the expensive synchronization checks when TSC is marked reliable. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Olof Johansson <olof@lixom.net> Link: http://lkml.kernel.org/r/20170209151231.491189912@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-02-10x86/tsc: Avoid the large time jump when sanitizing TSC ADJUSTThomas Gleixner
Olof reported that on a machine which has a BIOS wreckaged TSC the timestamps in dmesg are making a large jump because the TSC value is jumping forward after resetting the TSC ADJUST register to a sane value. This can be avoided by calling the TSC ADJUST saniziting function before initializing the per cpu sched clock machinery. That takes the offset into account and avoid the time jump. What cannot be avoided is that the 'Firmware Bug' warnings on the secondary CPUs are printed with the large time offsets because it would be too much effort and ugly hackery to print those warnings into a buffer and emit them after the adjustemt on the starting CPUs. It's a firmware bug and should be fixed in firmware. The weird timestamps are collateral damage and just illustrate the sillyness of the BIOS folks: [ 0.397445] smp: Bringing up secondary CPUs ... [ 0.402100] x86: Booting SMP configuration: [ 0.406343] .... node #0, CPUs: #1 [1265776479.930667] [Firmware Bug]: TSC ADJUST differs: Reference CPU0: -2978888639075328 CPU1: -2978888639183101 [1265776479.944664] TSC ADJUST synchronize: Reference CPU0: 0 CPU1: -2978888639183101 [ 0.508119] #2 [1265776480.032346] [Firmware Bug]: TSC ADJUST differs: Reference CPU0: -2978888639075328 CPU2: -2978888639183677 [1265776480.044192] TSC ADJUST synchronize: Reference CPU0: 0 CPU2: -2978888639183677 [ 0.607643] #3 [1265776480.131874] [Firmware Bug]: TSC ADJUST differs: Reference CPU0: -2978888639075328 CPU3: -2978888639184530 [1265776480.143720] TSC ADJUST synchronize: Reference CPU0: 0 CPU3: -2978888639184530 [ 0.707108] smp: Brought up 1 node, 4 CPUs [ 0.711271] smpboot: Total of 4 processors activated (21698.88 BogoMIPS) Reported-by: Olof Johansson <olof@lixom.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170209151231.411460506@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-02-10powerpc/pseries: Fix typo in parameter descriptionWei Yongjun
Fix typo in "hotplug_delay" parameter description. This allows modinfo to match the help text to the parameter. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-10powerpc/kprobes: Remove kprobe_exceptions_notify()Naveen N. Rao
... as the generic weak variant will do. Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-10powerpc/ftrace: Fix confusing help text for DISABLE_MPROFILE_KERNELAnton Blanchard
The final paragraph of the help text is reversed. We want to enable this option by default, and disable it if the toolchain has a working -mprofile-kernel. Fixes: 8c50b72a3b4f ("powerpc/ftrace: Add Kconfig & Make glue for mprofile-kernel") Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-10powerpc/powernv: Fix opal_exit tracepoint opcodeMichael Ellerman
Currently the opal_exit tracepoint usually shows the opcode as 0: <idle>-0 [047] d.h. 635.654292: opal_entry: opcode=63 <idle>-0 [047] d.h. 635.654296: opal_exit: opcode=0 retval=0 kopald-1209 [019] d... 636.420943: opal_entry: opcode=10 kopald-1209 [019] d... 636.420959: opal_exit: opcode=0 retval=0 This is because we incorrectly load the opcode into r0 before calling __trace_opal_exit(), whereas it expects the opcode in r3 (first function parameter). In fact we are leaving the retval in r3, so opcode and retval will always show the same value. Instead load the opcode into r3, resulting in: <idle>-0 [040] d.h. 636.618625: opal_entry: opcode=63 <idle>-0 [040] d.h. 636.618627: opal_exit: opcode=63 retval=0 Fixes: c49f63530bb6 ("powernv: Add OPAL tracepoints") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-10powerpc: Add a prototype for mcount() so it can be versionedMichael Ellerman
Currently we get a warning that _mcount() can't be versioned: WARNING: EXPORT symbol "_mcount" [vmlinux] version generation failed, symbol will not be versioned. Add a prototype to asm-prototypes.h to fix it. The prototype is not really correct, mcount() is not a normal function, it has a special ABI. But for the purpose of versioning it doesn't matter. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-10powerpc: Drop GPL from of_node_to_nid() export to match other archesShailendra Singh
The generic implementation of of_node_to_nid() is EXPORT_SYMBOL, added in commit 298535c00a2c ("of, numa: Add NUMA of binding implementation."). The powerpc implementation added in commit 953039c8df7b ("[PATCH] powerpc: Allow devices to register with numa topology") is EXPORT_SYMBOL_GPL. This creates an inconsistency for of_node_to_nid() callers across architectures. Update the powerpc implementation to be exported consistently with the generic implementation. Signed-off-by: Shailendra Singh <shailendras@nvidia.com> Reviewed-by: Andy Ritger <aritger@nvidia.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-10powerpc/kprobes: Optimize kprobe in kretprobe_trampoline()Anju T
Kprobe placed on the kretprobe_trampoline() during boot time can be optimized, since the instruction at probe point is a 'nop'. Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-10powerpc/kprobes: Implement OptprobesAnju T
Current infrastructure of kprobe uses the unconditional trap instruction to probe a running kernel. Optprobe allows kprobe to replace the trap with a branch instruction to a detour buffer. Detour buffer contains instructions to create an in memory pt_regs. Detour buffer also has a call to optimized_callback() which in turn call the pre_handler(). After the execution of the pre-handler, a call is made for instruction emulation. The NIP is determined in advanced through dummy instruction emulation and a branch instruction is created to the NIP at the end of the trampoline. To address the limitation of branch instruction in POWER architecture, detour buffer slot is allocated from a reserved area. For the time being, 64KB is reserved in memory for this purpose. Instructions which can be emulated using analyse_instr() are the candidates for optimization. Before optimization ensure that the address range between the detour buffer allocated and the instruction being probed is within +/- 32MB. Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-10powerpc/kprobes: Fixes for kprobe_lookup_name() on BENaveen N. Rao
Fix two issues with kprobes.h on BE which were exposed with the optprobes work: - one, having to do with a missing include for linux/module.h for MODULE_NAME_LEN -- this didn't show up previously since the only users of kprobe_lookup_name were in kprobes.c, which included linux/module.h through other headers, and - two, with a missing const qualifier for a local variable which ends up referring a string literal. Again, this is unique to how kprobe_lookup_name is being invoked in optprobes.c Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-10powerpc: Add helper to check if offset is within relative branch rangeAnju T
To permit the use of relative branch instruction in powerpc, the target address has to be relatively nearby, since the address is specified in an immediate field (24 bit filed) in the instruction opcode itself. Here nearby refers to 32MB on either side of the current instruction. This patch verifies whether the target address is within +/- 32MB range or not. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-10powerpc/bpf: Introduce __PPC_SH64()Naveen N. Rao
Introduce __PPC_SH64() as a 64-bit variant to encode shift field in some of the shift and rotate instructions operating on double-words. Convert some of the BPF instruction macros to use the same. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-10powerpc/pseries: Automatically resize HPT for memory hot add/removeDavid Gibson
We've now implemented code in the pseries platform to use the new PAPR interface to allow resizing the hash page table (HPT) at runtime. This patch uses that interface to automatically attempt to resize the HPT when memory is hot added or removed. This tries to always keep the HPT at a reasonable size for our current memory size. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-10powerpc/pseries: Advertise HPT resizing support via CASDavid Gibson
The hypervisor needs to know a guest is capable of using the HPT resizing PAPR extension in order to make full advantage of it for memory hotplug. If the hypervisor knows the guest is HPT resize aware, it can size the initial HPT based on the initial guest RAM size, relying on the guest to resize the HPT when more memory is hot-added. Without this, the hypervisor must size the HPT for the maximum possible guest RAM, which can lead to a huge waste of space if the guest never actually expends to that maximum size. This patch advertises the guest's support for HPT resizing via the ibm,client-architecture-support OF interface. We use bit 5 of byte 6 of option vector 5 for this purpose, as defined in the PAPR ACR "HPT resizing option". Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Reviewed-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-10powerpc/pseries: Add support for hash table resizingDavid Gibson
This adds support for using two hypercalls to change the size of the main hash page table while running as a PAPR guest. For now these hypercalls are only in experimental qemu versions. The interface is two part: first H_RESIZE_HPT_PREPARE is used to allocate and prepare the new hash table. This may be slow, but can be done asynchronously. Then, H_RESIZE_HPT_COMMIT is used to switch to the new hash table. This requires that no CPUs be concurrently updating the HPT, and so must be run under stop_machine(). This also adds a debugfs file which can be used to manually control HPT resizing or testing purposes. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Paul Mackerras <paulus@samba.org> [mpe: Rename the debugfs file to "hpt_order"] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-09ARM: orion: remove unused wnr854t_switch_plat_dataArnd Bergmann
The other instances of this structure got removed along with the MDIO device change, but this one was left behind and needs to be removed as well: arch/arm/mach-orion5x/wnr854t-setup.c:109:44: error: 'wnr854t_switch_plat_data' defined but not used [-Werror=unused-variable] static struct dsa_platform_data __initdata wnr854t_switch_plat_data = { Fixes: 575e93f7b5e6 ("ARM: orion: Register DSA switch as a MDIO device") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09Merge OPP material for v4.11 to satisfy dependencies.Rafael J. Wysocki
2017-02-09Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "A couple more fixes for 4.10: - fix addressing the short regset write issue (Dave Martin) - fix for LPAE systems which leave a pending imprecise data abort before entering the kernel (Alexander Sverdlin)" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8643/3: arm/ptrace: Preserve previous registers for short regset write ARM: 8642/1: LPAE: catch pending imprecise abort on unmask
2017-02-09arm64: head.S: Enable EL1 (host) access to SPE when entered at EL2Will Deacon
The SPE architecture requires each exception level to enable access to the SPE controls for the exception level below it, since additional context-switch logic may be required to handle the buffer safely. This patch allows EL1 (host) access to the SPE controls when entered at EL2. Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-02-09arm64: add ARCH_THUNDER2 to defconfigJayachandran C
This will allow the default kernel build to boot on Cavium ThunderX2 CN99XX processors. Signed-off-by: Jayachandran C <jnair@caviumnetworks.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-02-09arm64: add THUNDER2 processor familyJayachandran C
Add support for ThunderX2 CN99XX arm64 server processors. Introduce a new arm64 platform config option ARCH_THUNDER2 for these processors. Signed-off-by: Jayachandran C <jnair@caviumnetworks.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-02-09KVM: x86: hide KVM_HC_CLOCK_PAIRING on 32 bitArnd Bergmann
The newly added hypercall doesn't work on x86-32: arch/x86/kvm/x86.c: In function 'kvm_pv_clock_pairing': arch/x86/kvm/x86.c:6163:6: error: implicit declaration of function 'kvm_get_walltime_and_clockread';did you mean 'kvm_get_time_scale'? [-Werror=implicit-function-declaration] This adds an #ifdef around it, matching the one around the related functions that are also only implemented on 64-bit systems. Fixes: 55dd00a73a51 ("KVM: x86: add KVM_HC_CLOCK_PAIRING hypercall") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-09Merge tag 'mvebu-dt64-4.11-3' of git://git.infradead.org/linux-mvebu into ↵Arnd Bergmann
next/dt64 Pull "mvebu dt for 4.11 (part 3)" from Gregory CLEMENT: adjust name of sd-mmc-gop clock in sysco for Armada 7K/8K * tag 'mvebu-dt64-4.11-3' of git://git.infradead.org/linux-mvebu: arm64: dts: marvell: adjust name of sd-mmc-gop clock in syscon
2017-02-09Merge tag 'qcom-arm64-for-4.11-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt64 Pull "Qualcomm ARM64 Updates for v4.11 Part 2" from Andy Gross: * Add CoreSight nodes for MSM8916 * tag 'qcom-arm64-for-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: arm64: dts: qcom: Add msm8916 CoreSight components
2017-02-09Merge tag 'sunxi-dt64-for-4.11' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt64 Pull "Allwinner arm64 changes for 4.11" from Maxime Ripard: Some patches related the arm64 Allwinner SoCs, most notably: - Support for the MMC - Suport for the USB and mUSB controllers - New boards: Bananapi M64 * tag 'sunxi-dt64-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: arm64: allwinner: add BananaPi-M64 support arm64: allwinner: a64: add UART1 pin nodes arm64: allwinner: pine64: add MMC support arm64: allwinner: a64: Increase the MMC max frequency arm64: allwinner: a64: Add MMC pinctrl nodes arm64: allwinner: a64: Add MMC nodes arm64: dts: allwinner: Remove no longer used pinctrl/sun4i-a10.h header arm64: dts: enable the MUSB controller of Pine64 in host-only mode arm64: dts: add MUSB node to Allwinner A64 dtsi arm64: dts: allwinner: enable EHCI1, OHCI1 and USB PHY nodes in Pine64 arm64: dts: allwinner: sort the nodes in sun50i-a64-pine64.dts arm64: dts: allwinner: add USB1-related nodes of Allwinner A64
2017-02-09Merge tag 'kvmarm-for-4.11' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD kvmarm updates for 4.11 - GICv3 save restore - Cache flushing fixes - MSI injection fix for GICv3 ITS - Physical timer emulation support
2017-02-09arm64: use is_vmalloc_addrMiles Chen
To is_vmalloc_addr() to check if an address is a vmalloc address instead of checking VMALLOC_START and VMALLOC_END manually. Signed-off-by: Miles Chen <miles.chen@mediatek.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-02-09m68k: Delete an unnecessary variable assignment in sys_cacheflush()Markus Elfring
Delete an assignment for the local variable "ret" in an if branch because it was initialised by the same value. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2017-02-09m68k/mac: Clean up interrupt debug macros and printk statementsFinn Thain
Mac interrupt code has been debugged. The Penguin deficiencies that still cause unhandled interrupts aren't fixable here. Besides, interrupts are fast and frequent and these printk statements were never really useful IMO. Remove them. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2017-02-09m68k/mac: Remove SHUTUP_SONIC interrupt hackFinn Thain
In macints.c there is some startup code which disables the SONIC interrupt in an attempt to avoid an unhandled slot interrupt, which would be fatal. This only works on those machines where the SONIC device is on-board. When the mac_sonic driver is built-in, there's little point in doing this, because the device will be initialized a few seconds later anyway. But when mac_sonic is a module, the window for an unhandled interrupt is longer. Either way, we've already run the gauntlet for 5 or 10 seconds by the time we get around to disabling this particular device. It's only by sheer luck that we got this far. Really, this is too little too late. The general problem of unhandled early interrupts also affects other devices on other models. There are better ways to resolve this problem. 1) When using the Penguin bootloader, boot Mac OS with extensions disabled (by holding down the shift key at startup or by use of the Extensions Manager control panel). The Penguin docs already contain this advice, as it is always effective. 2) Have the Penguin bootloader disable the device. It already attempts to disable slot interrupts. But since some hardware cannot mask slot interrupts, Penguin should probably close the relevant device drivers. 3) Use Emile instead of Penguin. AFAIK the boot ROM never enables network device interrupts and hence they don't need to be disabled. Remove this hack. It requires maintenance and it doesn't solve the problem. It improves the odds for a few models, but so does setting CONFIG_MAC_SONIC=y. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2017-02-09m68k/mac: Improve NMI handlerFinn Thain
mac_nmi_handler() is useless in its present form and locks up my PowerBook 180. Let's throw out the dead code and make it do something useful: print a register dump and a stack trace. mac_debug_handler() is also dead code. Remove it along with its static data. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2017-02-09m68k/defconfig: Update defconfigs for v4.10-rc1Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2017-02-09m68k/mac: Remove unneeded linux/miscdevice.h includeCorentin Labbe
arch/m68k/mac/misc.c does not use any miscdevice so the inclusion of linux/miscdevice.h is unnecessary. This patch remove this unnecessary include. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2017-02-09arm64: use linux/sizes.h for constantsMiles Chen
Use linux/size.h to improve code readability. Signed-off-by: Miles Chen <miles.chen@mediatek.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-02-09KVM: PPC: Book 3S: Fix error return in kvm_vm_ioctl_create_spapr_tce()Wei Yongjun
Fix to return error code -ENOMEM from the memory alloc error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-02-09powerpc/pseries: Add hypercall wrappers for hash page table resizingDavid Gibson
This adds the hypercall numbers and wrapper functions for the hash page table resizing hypercalls. These hypercall numbers are defined in the PAPR ACR "HPT resizing option". It also adds a new firmware feature flag to track the presence of the HPT resizing calls. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-09powerpc/powernv: Properly set "host-ipi" on IPIsBenjamin Herrenschmidt
Otherwise KVM will fail to pass them through to the host Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-09powerpc/powernv: Fix CPU hotplug to handle waking on HVIBenjamin Herrenschmidt
The IPIs come in as HVI not EE, so we need to test the appropriate SRR1 bits. The encoding is such that it won't have false positives on P7 and P8 so we can just test it like that. We also need to handle the icp-opal variant of the flush. Fixes: d74361881f0d ("powerpc/xics: Add ICP OPAL backend") Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-09powerpc/mm/radix: Update ERAT flushes when invalidating TLBBenjamin Herrenschmidt
Three tiny changes to the ERAT flushing logic: First don't make it depend on DD1. It hasn't been decided yet but we might run DD2 in a mode that also requires explicit flushes for performance reasons so make it unconditional. We also add a missing isync, and finally remove the flush from _tlbiel_va as it is only necessary for congruence-class invalidations (PID, LPID and full TLB), not targetted invalidations. Fixes: 96ed1fe511a8 ("powerpc/mm/radix: Invalidate ERAT on tlbiel for POWER9 DD1") Cc: stable@vger.kernel.org # v4.9+ Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-08Revert "x86/ioapic: Restore IO-APIC irq_chip retrigger callback"Linus Torvalds
This reverts commit 020eb3daaba2857b32c4cf4c82f503d6a00a67de. Gabriel C reports that it causes his machine to not boot, and we haven't tracked down the reason for it yet. Since the bug it fixes has been around for a longish time, we're better off reverting the fix for now. Gabriel says: "It hangs early and freezes with a lot RCU warnings. I bisected it down to : > Ruslan Ruslichenko (1): > x86/ioapic: Restore IO-APIC irq_chip retrigger callback Reverting this one fixes the problem for me.. The box is a PRIMERGY TX200 S5 , 2 socket , 2 x E5520 CPU(s) installed" and Ruslan and Thomas are currently stumped. Reported-and-bisected-by: Gabriel C <nix.or.die@gmail.com> Cc: Ruslan Ruslichenko <rruslich@cisco.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org # for the backport of the original commit Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-09MIPS: BMIPS: enable CPUfreqMarkus Mayer
Enable all applicable CPUfreq options. Signed-off-by: Markus Mayer <mmayer@broadcom.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-09BMIPS: Enable prerequisites for CPUfreq in MIPS Kconfig.Markus Mayer
Turn on CPU_SUPPORTS_CPUFREQ and MIPS_EXTERNAL_TIMER for BMIPS. Signed-off-by: Markus Mayer <mmayer@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-09MIPS: BMIPS: Update defconfigMarkus Mayer
Ran "make savedefconfig" to bring bmips_stb_defconfig up to date. Signed-off-by: Markus Mayer <mmayer@broadcom.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-09powerpc/opal-lpc: Remove unneeded includeBenjamin Herrenschmidt
We don't need asm/xics.h Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-09powerpc/opal-irqchip: Use interrupt names if presentBenjamin Herrenschmidt
Recent versions of OPAL can provide names for the various OPAL interrupts, so let's use them. This also modernises the code that fetches the interrupt array to use the helpers provided by the generic code instead of hand-parsing the property. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Free irqs on error, check allocation of names, consolidate error handling, whitespace.] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-09powerpc/powernv: Display the correct error info for CAPP errors.Mahesh Salgaonkar
On some CAPP errors we see console messages that prints unknown HMIs for which CAPI recovery is in progress. This patch fixes this by printing correct error info for HMI generated due to CAPP recovery. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Tested-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-09powerpc/powernv: Add XHCI and USB storage to defconfigMichael Neuling
These are common on bare metal machines, so put them in the defconfig. This adds 216KB to the vmlinux size Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-09powerpc/64: Include bpf/bcc related config options in defconfigsNaveen N. Rao
Specifically: - CONFIG_BPF_SYSCALL - CONFIG_NET_SCHED - CONFIG_NET_CLS_BPF - CONFIG_NET_CLS_ACT - CONFIG_NET_ACT_BPF - CONFIG_CGROUP_BPF - CONFIG_UPROBE_EVENT ... in pseries, ppc64 and powernv defconfigs. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit (git 2.34.1) at 2025-09-12 23:27:53 +0000