| Age | Commit message (Collapse) | Author |
|---|
|
We had assumed that SAL firmware would return an error if it didn't
understand extended config space. Unfortunately, the SAL on the SGI 750
doesn't do that, it panics the machine. So, condition the extended PCI
config space accesses on SAL revision 3.2.
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Tested-by: Brad Spengler <spender@grsecurity.net>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
struct sn_hwperf_ioctl_args member arg (u64) cannot be less than 0.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
Registers are not saved anywhere when INIT comes during fsys mode and
we cannot know what happened when we investigate vmcore captured by
kdump. This patch adds new function finish_pt_regs() so registers can
be saved in such a case.
Signed-off-by: Takao Indoh <indou.takao@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
* git://git.infradead.org/~dwmw2/iommu-2.6.32:
x86: Move pci_iommu_init to rootfs_initcall()
Run pci_apply_final_quirks() sooner.
Mark pci_apply_final_quirks() __init rather than __devinit
Rename pci_init() to pci_apply_final_quirks(), move it to quirks.c
intel-iommu: Yet another BIOS workaround: Isoch DMAR unit with no TLB space
intel-iommu: Decode (and ignore) RHSA entries
intel-iommu: Make "Unknown DMAR structure" message more informative
|
|
Remove the <plat/audio.h> include from arch/arm/plat-s3c/include/plat/audio.h
as it provides nothing to the current kernel and is not in any future plans
for the system.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
Extend the sh_eth driver to allow passing the mac address
using the platform data structure. This to simplify board
setup code.
Signed-off-by: Magnus Damm <damm@opensource.se>
Tested-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The clock name for the watchdog devices was not set consistently
with mx21 on these platforms, resulting in the reset not to work.
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
Fix pcm037_eet compilation with the new imx SPI driver by unifying
platform device names.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
mxc_iomux_v3_init() is defined in arch/arm/plat-mxc/iomux-v3.c, which is
not linked for i.MX31 and produces an undefined reference error. Fix this
by building the offending code only for i.MX35.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
We have to use mxc_gpio_mode() for the card detection pin
instead of mxc_gpio_setup_multiple_pins() because the latter
does a gpio_request() and thus a later gpio_request() fails.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
|
|
This cribs the x86 implementation of ftrace_nmi_enter() and friends to
make ftrace_modify_code() NMI safe, particularly on SMP configurations.
For additional notes on the problems involved, see the comment below
ftrace_call_replace().
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
|
|
With lots of virtual devices it's easy to generate a lot of
events and chew up the kernel IRQ stack.
Reported-by: hyl <heyongli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This approach is the first baby step towards solving many of the
structural problems the x86 MCE logging code is having today:
- It has a private ring-buffer implementation that has a number
of limitations and has been historically fragile and buggy.
- It is using a quirky /dev/mcelog ioctl driven ABI that is MCE
specific. /dev/mcelog is not part of any larger logging
framework and hence has remained on the fringes for many years.
- The MCE logging code is still very unclean partly due to its ABI
limitations. Fields are being reused for multiple purposes, and
the whole message structure is limited and x86 specific to begin
with.
All in one, the x86 tree would like to move away from this private
implementation of an event logging facility to a broader framework.
By using perf events we gain the following advantages:
- Multiple user-space agents can access MCE events. We can have an
mcelog daemon running but also a system-wide tracer capturing
important events in flight-recorder mode.
- Sampling support: the kernel and the user-space call-chain of MCE
events can be stored and analyzed as well. This way actual patterns
of bad behavior can be matched to precisely what kind of activity
happened in the kernel (and/or in the app) around that moment in
time.
- Coupling with other hardware and software events: the PMU can track a
number of other anomalies - monitoring software might chose to
monitor those plus the MCE events as well - in one coherent stream of
events.
- Discovery of MCE sources - tracepoints are enumerated and tools can
act upon the existence (or non-existence) of various channels of MCE
information.
- Filtering support: we just subscribe to and act upon the events we
are interested in. Then even on a per event source basis there's
in-kernel filter expressions available that can restrict the amount
of data that hits the event channel.
- Arbitrary deep per cpu buffering of events - we can buffer 32
entries or we can buffer as much as we want, as long as we have
the RAM.
- An NMI-safe ring-buffer implementation - mappable to user-space.
- Built-in support for timestamping of events, PID markers, CPU
markers, etc.
- A rich ABI accessible over system call interface. Per cpu, per task
and per workload monitoring of MCE events can be done this way. The
ABI itself has a nice, meaningful structure.
- Extensible ABI: new fields can be added without breaking tooling.
New tracepoints can be added as the hardware side evolves. There's
various parsers that can be used.
- Lots of scheduling/buffering/batching modes of operandi for MCE
events. poll() support. mmap() support. read() support. You name it.
- Rich tooling support: even without any MCE specific extensions added
the 'perf' tool today offers various views of MCE data: perf report,
perf stat, perf trace can all be used to view logged MCE events and
perhaps correlate them to certain user-space usage patterns. But it
can be used directly as well, for user-space agents and policy action
in mcelog, etc.
With this we hope to achieve significant code cleanup and feature
improvements in the MCE code, and we hope to be able to drop the
/dev/mcelog facility in the end.
This patch is just a plain dumb dump of mce_log() records to
the tracepoints / perf events framework - a first proof of
concept step.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <4AD42A0D.7050104@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Merge reason: we were on an -rc1 base, merge up to -rc4.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This adds return_address.c to the -pg exclusion list, as this is the
building block for CALLER_ADDRx we do not want to profile this.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
|
|
Merge reason: Pick up tracing/filters fix from the urgent queue,
we will queue up dependent patches.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Bastian Blank reported a boot crash with stackprotector enabled,
and debugged it back to edx register corruption.
For historical reasons irq enable/disable/save/restore had special
calling sequences to make them more efficient. With the more
recent introduction of higher-level and more general optimisations
this is no longer necessary so we can just use the normal PVOP_
macros.
This fixes some residual bugs in the old implementations which left
edx liable to inadvertent clobbering. Also, fix some bugs in
__PVOP_VCALLEESAVE which were revealed by actual use.
Reported-by: Bastian Blank <bastian@waldi.eu.org>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
Cc: Xen-devel <xen-devel@lists.xensource.com>
LKML-Reference: <4AD3BC9B.7040501@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Meaning receive multiple messages, reducing the number of syscalls and
net stack entry/exit operations.
Next patches will introduce mechanisms where protocols that want to
optimize this operation will provide an unlocked_recvmsg operation.
This takes into account comments made by:
. Paul Moore: sock_recvmsg is called only for the first datagram,
sock_recvmsg_nosec is used for the rest.
. Caitlin Bestler: recvmmsg now has a struct timespec timeout, that
works in the same fashion as the ppoll one.
If the underlying protocol returns a datagram with MSG_OOB set, this
will make recvmmsg return right away with as many datagrams (+ the OOB
one) it has received so far.
. Rémi Denis-Courmont & Steven Whitehouse: If we receive N < vlen
datagrams and then recvmsg returns an error, recvmmsg will return
the successfully received datagrams, store the error and return it
in the next call.
This paves the way for a subsequent optimization, sk_prot->unlocked_recvmsg,
where we will be able to acquire the lock only at batch start and end, not at
every underlying recvmsg call.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There was namespace overlap due to a rename i did - this caused
the following build warning, reported by Stephen Rothwell against
linux-next x86_64 allmodconfig:
arch/x86/kernel/cpu/perf_event.c: In function 'intel_get_event_idx':
arch/x86/kernel/cpu/perf_event.c:1445: warning: 'event_constraint' is used uninitialized in this function
This is a real bug not just a warning: fix it by renaming the
global event-constraints table pointer to 'event_constraints'.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Stephane Eranian <eranian@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091013144223.369d616d.sfr@canb.auug.org.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This enables us to build the dwarf unwinder both with modules enabled and
disabled in addition to reducing code size in the latter case. The
helpers are also consolidated, and modified to resemble the BUG module
helpers.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
|
|
This splits out the unwinder implementation and adds a new
return_address() abstraction modelled after the ARM code. The DWARF
unwinder is tied in to this, returning NULL otherwise in the case of
being unable to support arbitrary depths.
This enables us to get correct behaviour with the unwinder enabled,
as well as disabling the arbitrary depth support when frame pointers are
enabled, as arbitrary depths with __builtin_return_address() are not
supported regardless.
With this abstraction it's also possible to layer on a simplified
implementation with frame pointers in the event that the unwinder isn't
enabled, although this is left as a future exercise.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
|
|
|
|
Sync up with latest core changes in the syscalls tracing area:
- tracing: Map syscall name to number (syscall_name_to_nr())
- tracing: Call arch_init_ftrace_syscalls at boot
- tracing: add support tracepoint ids (set_syscall_{enter,exit}_id())
Taken from the s390 change.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
|
|
|
|
This too follows the ARM change, given that the issue at hand applies to
all platforms that implement lazy D-cache writeback.
This fixes up the case when a page mapping disappears between the
flush_dcache_page() call (when PG_dcache_dirty is set for the page) and
the update_mmu_cache() call -- such as in the case of swap cache being
freed early. This kills off the mapping test in update_mmu_cache() and
switches to simply testing for PG_dcache_dirty.
Reported-by: Nitin Gupta <ngupta@vflare.org>
Reported-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
|
|
This follows the ARM change, as SH had all of the same issues:
Make die() better match x86:
- add printing of the last accessed sysfs file
- ensure console_verbose() is called under the lock
- ensure we panic outside of oops_exit()
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
|
|
|
|
The way to obtain a kernel-mode stack pointer from a struct pt_regs in
32-bit mode is "subtle": the stack doesn't actually contain the stack
pointer, but rather the location where it would have been marks the
actual previous stack frame. For clarity, use kernel_stack_pointer()
instead of coding this weirdness explicitly.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
|
|
The way to obtain a kernel-mode stack pointer from a struct
pt_regs in 32-bit mode is "subtle": the stack doesn't actually
contain the stack pointer, but rather the location where it would
have been marks the actual previous stack frame. For clarity, use
kernel_stack_pointer() instead of coding this weirdness
explicitly.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
|
|
The way to obtain a kernel-mode stack pointer from a struct pt_regs in
32-bit mode is "subtle": the stack doesn't actually contain the stack
pointer, but rather the location where it would have been marks the
actual previous stack frame. For clarity, use kernel_stack_pointer()
instead of coding this weirdness explicitly.
Furthermore, user_mode() is only valid when the process is known to
not run in V86 mode. Use the safer user_mode_vm() instead.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
The way to obtain a kernel-mode stack pointer from a struct pt_regs in
32-bit mode is "subtle": the stack doesn't actually contain the stack
pointer, but rather the location where it would have been marks the
actual previous stack frame. For clarity, use kernel_stack_pointer()
instead of coding this weirdness explicitly.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Add interleaved NUMA emulation support
This patch interleaves emulated nodes over the system's physical
nodes. This is required for interleave optimizations since
mempolicies, for example, operate by iterating over a nodemask and
act without knowledge of node distances. It can also be used for
testing memory latencies and NUMA bugs in the kernel.
There're a couple of ways to do this:
- divide the number of emulated nodes by the number of physical
nodes and allocate the result on each physical node, or
- allocate each successive emulated node on a different physical
node until all memory is exhausted.
The disadvantage of the first option is, depending on the asymmetry
in node capacities of each physical node, emulated nodes may
substantially differ in size on a particular physical node compared
to another.
The disadvantage of the second option is, also depending on the
asymmetry in node capacities of each physical node, there may be
more emulated nodes allocated on a single physical node as another.
This patch implements the second option; we sacrifice the
possibility that we may have slightly more emulated nodes on a
particular physical node compared to another in lieu of node size
asymmetry.
[ Note that "node capacity" of a physical node is not only a
function of its addressable range, but also is affected by
subtracting out the amount of reserved memory over that range.
NUMA emulation only deals with available, non-reserved memory
quantities. ]
We ensure there is at least a minimal amount of available memory
allocated to each node. We also make sure that at least this
amount of available memory is available in ZONE_DMA32 for any node
that includes both ZONE_DMA32 and ZONE_NORMAL.
This patch also cleans the emulation code up by no longer passing
the statically allocated struct bootnode array among the various
functions. This init.data array is not allocated on the stack since
it may be very large and thus it may be accessed at file scope.
The WARN_ON() for nodes_cover_memory() when faking proximity
domains is removed since it relies on successive nodes always
having greater start addresses than previous nodes; with
interleaving this is no longer always true.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Ankita Garg <ankita@in.ibm.com>
Cc: Len Brown <len.brown@intel.com>
LKML-Reference: <alpine.DEB.1.00.0909251519150.14754@chino.kir.corp.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This is the counterpart to "x86: export k8 physical topology" for
SRAT. It is not as invasive because the acpi code already seperates
node setup into detection and registration steps, with the
exception of registering e820 active regions in
acpi_numa_memory_affinity_init(). This is now moved to
acpi_scan_nodes() if NUMA emulation is disabled or deferred.
acpi_numa_init() now returns a value which specifies whether an
underlying SRAT was located. If so, that topology can be used by
the emulation code to interleave emulated nodes over physical nodes
or to register the nodes for ACPI.
acpi_get_nodes() may now be used to export the srat physical
topology of the machine for NUMA emulation.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Ankita Garg <ankita@in.ibm.com>
Cc: Len Brown <len.brown@intel.com>
LKML-Reference: <alpine.DEB.1.00.0909251518580.14754@chino.kir.corp.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
To eventually interleave emulated nodes over physical nodes, we
need to know the physical topology of the machine without actually
registering it. This does the k8 node setup in two parts:
detection and registration. NUMA emulation can then used the
physical topology detected to setup the address ranges of emulated
nodes accordingly. If emulation isn't used, the k8 nodes are
registered as normal.
Two formals are added to the x86 NUMA setup functions: `acpi' and
`k8'. These represent whether ACPI or K8 NUMA has been detected;
both cannot be true at the same time. This specifies to the NUMA
emulation code whether an underlying physical NUMA topology exists
and which interface to use.
This patch deals solely with separating the k8 setup path into
Northbridge detection and registration steps and leaves the ACPI
changes for a subsequent patch. The `acpi' formal is added here,
however, to avoid touching all the header files again in the next
patch.
This approach also ensures emulated nodes will not span physical
nodes so the true memory latency is not misrepresented.
k8_get_nodes() may now be used to export the k8 physical topology
of the machine for NUMA emulation.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Ankita Garg <ankita@in.ibm.com>
Cc: Len Brown <len.brown@intel.com>
LKML-Reference: <alpine.DEB.1.00.0909251518400.14754@chino.kir.corp.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Convert all printk's in arch/x86/mm/k8topology_64.c to use
pr_info() or pr_err() appropriately.
Adds log levels for messages currently lacking them.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Ankita Garg <ankita@in.ibm.com>
Cc: Len Brown <len.brown@intel.com>
LKML-Reference: <alpine.DEB.1.00.0909251517440.14754@chino.kir.corp.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The branch profiling creates very complex code for each if
statement, to the point that gcc has trouble even analyzing
something as simple as
if (count > 5)
count = 5;
This then means that causing an error on code that gcc cannot
analyze for copy_from_user() and co is not very productive.
This patch excludes the strict copy checks in the case of branch
profiling being enabled.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20091006070452.5e1fc119@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Create a new socket level option to report number of queue overflows
Recently I augmented the AF_PACKET protocol to report the number of frames lost
on the socket receive queue between any two enqueued frames. This value was
exported via a SOL_PACKET level cmsg. AFter I completed that work it was
requested that this feature be generalized so that any datagram oriented socket
could make use of this option. As such I've created this patch, It creates a
new SOL_SOCKET level option called SO_RXQ_OVFL, which when enabled exports a
SOL_SOCKET level cmsg that reports the nubmer of times the sk_receive_queue
overflowed between any two given frames. It also augments the AF_PACKET
protocol to take advantage of this new feature (as it previously did not touch
sk->sk_drops, which this patch uses to record the overflow count). Tested
successfully by me.
Notes:
1) Unlike my previous patch, this patch simply records the sk_drops value, which
is not a number of drops between packets, but rather a total number of drops.
Deltas must be computed in user space.
2) While this patch currently works with datagram oriented protocols, it will
also be accepted by non-datagram oriented protocols. I'm not sure if thats
agreeable to everyone, but my argument in favor of doing so is that, for those
protocols which aren't applicable to this option, sk_drops will always be zero,
and reporting no drops on a receive queue that isn't used for those
non-participating protocols seems reasonable to me. This also saves us having
to code in a per-protocol opt in mechanism.
3) This applies cleanly to net-next assuming that commit
977750076d98c7ff6cbda51858bb5a5894a9d9ab (my af packet cmsg patch) is reverted
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Latest kernel has a kernel panic in booting on i386 machine when
profile=2 setting in cmdline. It is due to 'sp' being incorrect in
profile_pc().
BUG: unable to handle kernel NULL pointer dereference at 00000246
IP: [<c01288b6>] profile_pc+0x2a/0x48
*pde = 00000000
Oops: 0000 [#1] SMP
This differs from the original version by Alex Shi in that we use the
kernel_stack_pointer() inline already defined in <asm/ptrace.h> for
this purpose, instead of #ifdef.
Originally-by: Alex Shi <alex.shi@intel.com>
Cc: "Chen, Tim C" <tim.c.chen@intel.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
On ARM, update_mmu_cache() does dcache flush for a page only if
it has a kernel mapping (page_mapping(page) != NULL). The correct
behavior would be to force the flush based on dcache_dirty bit only.
One of the cases where present logic would be a problem is when
a RAM based block device[1] is used as a swap disk. In this case,
we would have in-memory data corruption as shown in steps below:
do_swap_page()
{
- Allocate a new page (if not already in swap cache)
- Issue read from swap disk
- Block driver issues flush_dcache_page()
- flush_dcache_page() simply sets PG_dcache_dirty bit and does not
actually issue a flush since this page has no user space mapping yet.
- Now, if swap disk is almost full, this newly read page is removed
from swap cache and corrsponding swap slot is freed.
- Map this page anonymously in user space.
- update_mmu_cache()
- Since this page does not have kernel mapping (its not in page/swap
cache and is mapped anonymously), it does not issue dcache flush
even if dcache_dirty bit is set by flush_dcache_page() above.
<user now gets stale data since dcache was never flushed>
}
Same problem exists on mips too.
[1] example:
- brd (RAM based block device)
- ramzswap (RAM based compressed swap device)
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Move the handling of truncated %rip from an iret fault to the fault
entry path.
This allows x86-64 to use the standard search_extable() function.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <1255357103-5418-1-git-send-email-brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Move the trampoline and accessors back out of .cpuinit.* for the
case of 64-bits+ACPI_SLEEP.
This solves s2ram hangs reported in:
http://bugzilla.kernel.org/show_bug.cgi?id=14279
Reported-and-bisected-by: Christian Casteyde <casteyde.christian@free.fr>
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: <bugzilla-daemon@bugzilla.kernel.org>
Cc: "Andrew Morton" <akpm@linux-foundation.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
We want this to happen after the PCI quirks, which are now running at
the very end of the fs_initcalls.
This works around the BIOS problems which were originally addressed by
commit db8be50c4307dac2b37305fc59c8dc0f978d09ea ('USB: Work around BIOS
bugs by quiescing USB controllers earlier'), which was reverted in
commit d93a8f829fe1d2f3002f2c6ddb553d12db420412.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
|
|
MTRR and PAT support (which got added to CPUs over 10 years ago)
are no longer really optional in that more and more things are
depending on PAT just working, including various drivers and newer
versions of X. (to not even speak of MTRR)
Having this as a regular config option just no longer makes sense.
This patch relegates CONFIG_X86_PAT to the EMBEDDED category so
ultra-embedded can still disable it if they really need to.
Also-Suggested-by: Roland Dreier <rdreier@cisco.com>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
LKML-Reference: <20091011103302.62bded41@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
this_cpu_inc/dec reduces the number of instructions needed.
Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Add an atomic notifier which ensures proper locking when conveying
MCE info to EDAC for decoding. The actual notifier call overrides a
default, negative priority notifier.
Note: make sure we register the default decoder only once since
mcheck_init() runs on each CPU.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <20091003065752.GA8935@liondog.tnic>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Thanks to tip form ARM folks and Russell King.
If flush_dcache_page() occurs on a swapin it will have a mapping
and we'll try to defer the flush by setting the dirty bit.
But when it hits update_dcache_page() we won't flush because the
page won't have a mapping any more. So remove the mapping
requirement in flush_dcache().
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PXA27x Errata #37 implies system will hang when switching into or out of
half turbo (HT bit in CLKCFG) mode, workaround this by not using it.
Signed-off-by: Dennis O'Brien <dennis.obrien@eqware.net>
Cc: stable-2.6.31 <stable@kernel.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
|
|
Currently the irq_type field of the csb726_lan_config structure is
initialized twice. The value in the first case,
SMSC911X_IRQ_POLARITY_ACTIVE_LOW, is normally stored in the irq_polarity
field, so I have renamed the field in the first initialization to that.
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
|
