summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2009-12-01[ARM] pxa/saar: set default WLED output currentHaojian Zhuang
Set default WLED output current in saar. Otherwise, LCD backlight won't be effective. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01pxafb: add transparency field to pxafb_mode_info structPieter Grimmerink
This allows to select either RGB565 (transparency 0) or RGBT555 (transparency 1) from the mode info Signed-off-by: Pieter Grimmerink <p.grimmerink@inepro.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: Blackfin: fix SMP build error in start_thread() Blackfin: fix memset in smp_send_reschedule() and -stop() Blackfin: fix typo in ptrace poking Blackfin: check for anomaly 05000475 Blackfin: work around testset anomaly 05000477 Blackfin: update anomaly lists Blackfin: fix cache Kconfig typo Blackfin: fix suspend/resume failure with some on-chip ROMs
2009-11-30Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] Update mach-types ARM: 5793/1: ARM: Check put_user fail in do_signal when enable OABI_COMPAT MAINTAINERS: add maintainer information for AMBA primecell drivers [ARM] pxa/spitz: fix compile regression on spitz ARM: PNX4008: i2c-pnx: use the same dev_id for request_irq and free_irq [ARM] pxa/cpufreq: fix index assignments for end marker ARM: PNX4008: fix watchdog device driver name [ARM] kmap: fix build errors with DEBUG_HIGHMEM enabled
2009-11-30Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Fix DEBUG_HIGHMEM build break from d4515646699
2009-12-01powerpc: Fix DEBUG_HIGHMEM build break from d4515646699Becky Bruce
Code was added to mm/higmem.c that depends on several kmap types that powerpc does not support. We add dummy invalid definitions for KM_NMI, KM_NM_PTE, and KM_IRQ_PTE. According to list discussion, this fix should not be needed anymore starting with 2.6.33. The code is commented to this effect so hopefully we will remember to remove this. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-11-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sunsu: Use sunserial_console_termios() in sunsu_console_setup(). sunsu: Pass true 'ignore_line' to console match when RSC or LOM console. serial: suncore: Fix RSC/LOM handling in sunserial_console_termios(). serial: suncore: Add 'ignore_line' argument to sunserial_console_match(). sunsu: Fix detection of SU ports which are RSC console or control. sunsab: Do not set sunsab_reg.cons right before registering minors. sparc64: Fix definition of VMEMMAP_SIZE.
2009-11-30Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Enable ACPI PDC handshake for VIA/Centaur CPUs
2009-11-30arch/alpha/kernel: Add kmalloc NULL testsJulia Lawall
Check that the result of kmalloc is not NULL before passing it to other functions. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression *x; identifier f; constant char *C; @@ x = \(kmalloc\|kcalloc\|kzalloc\)(...); ... when != x == NULL when != x != NULL when != (x || ...) ( kfree(x) f(...,C,...,x,...) | *f(...,x,...) | *x->f ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Matt Turner <mattst88@gmail.com>
2009-11-30arch/alpha/kernel/sys_ruffian.c: Use DIV_ROUND_CLOSESTJulia Lawall
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d but is perhaps more readable. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ @depends on haskernel@ expression x,__divisor; @@ - (((x) + ((__divisor) / 2)) / (__divisor)) + DIV_ROUND_CLOSEST(x,__divisor) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Matt Turner <mattst88@gmail.com>
2009-11-30x86: Fix a section mismatch in arch/x86/kernel/setup.cHelight.Xu
copy_edd() should be __init. warning msg: WARNING: vmlinux.o(.text+0x7759): Section mismatch in reference from the function copy_edd() to the variable .init.data:boot_params The function copy_edd() references the variable __initdata boot_params. This is often because copy_edd lacks a __initdata annotation or the annotation of boot_params is wrong. Signed-off-by: ZhenwenXu <helight.xu@gmail.com> LKML-Reference: <4B139F8F.4000907@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-11-30parisc: fix unwind with recent gcc versionsHelge Deller
kernel unwinding is broken with gcc >= 4.x. Part of the problem is that binutils seems very sensitive to where the unwind information is stored. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-11-30sh: ms7724se: Add runtime PM support for FSIKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-30Merge branch 'mxc-nand' of git://git.pengutronix.de/git/imx/linux-2.6David Woodhouse
2009-11-30mtd: Add bad block table overrides to Davinci NAND driverMark A. Greer
The existing NAND infrastructure allows the default main and mirror bad block tables to be overridden in nand_default_bbt(). However, the davinci_nand driver does not support this. Add that support by adding fields to the davinci driver's platform data so platform code can pass in their own bbt's and make the davinci_nand driver honor them. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> CC: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-11-30mtd: s3c2410: propagate nand options from the platform dataBen Dooks
Update the nand information passed to the core from the platform data to setup the initial option value, so that flags such as NAND_SCAN_SILENT_NODEV can pass through. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-11-30mx35: add usb gadget support in mx35pdk.cHarro Haan
Signed-off-by: Harro Haan <hrhaan@yahoo.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-30mx35: register usb_ahb clock in clock-imx35.cHarro Haan
Signed-off-by: Harro Haan <hrhaan@yahoo.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-30sh: Improve kfr2r09 serial port setup codeMagnus Damm
This patch improves the serial port communication quality of port YC401 on the KFR2R09 board. With this fix serial console is fine at 115200 - up and down keys now work as expected. Thanks to Hirohide Yamasaki for this fix. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-30sh: Break out SuperH PFC codeMagnus Damm
This file breaks out the SuperH PFC code from arch/sh/kernel/gpio.c + arch/sh/include/asm/gpio.h to drivers/sh/pfc.c + include/linux/sh_pfc.h. Similar to the INTC stuff. The non-SuperH specific file location makes it possible to share the code between multiple architectures. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-30sh: Move KEYSC header fileMagnus Damm
This patch moves the KEYSC header file from the SuperH specific asm directory to a place where it can be shared by multiple architectures. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-30sh: convert /proc/cpu/aligmnent, /proc/cpu/kernel_alignment to seq_fileAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-30sh: Add CPG save/restore code for sh7724 R-standbyMagnus Damm
Add sh7724 code to save and restore CPG state during R-standby. Only CPG registers IRDACLKCR and SPUCLKCR require software save and restore. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-30sh: Add SDHI power control support to EcovecMagnus Damm
This patch adds support for SDHI power control to the Ecovec board. Platform data and power control callbacks for SDHI0 and SDHI1 are added. Power is by default off. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-30sh: mach-ecovec24: modify address mapKuninori Morimoto
ecovec24 board expect address map 2 instead of map 1 Signed-off-by: Mizukawa Tatsuo <mizukawa.tatsuo@renesas.com> Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-28x86: Use -maccumulate-outgoing-args for sane mcount prologuesThomas Gleixner
commit 746357d (x86: Prevent GCC 4.4.x (pentium-mmx et al) function prologue wreckage) uses -mtune=generic to work around the function prologue problem with mcount on -march=pentium-mmx and others. Jakub pointed out that we can use -maccumulate-outgoing-args instead which is selected by -mtune=generic and prevents the problem without losing the -march specific optimizations. Pointed-out-by: Jakub Jelinek <jakub@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable@kernel.org
2009-11-28ARM: 5834/1: ARM: U8500 integrate to ARM architectureSrinidhi Kasagar
This hooks the U8500 support into the ARM kbuild system. This integration also enables SMP and its helper functions for U8500 platform Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-28ARM: 5833/1: ARM nomadik: enable U8500 for common platformSrinidhi Kasagar
Enable U8500 architecture to get access to the common code shared across various ST-Ericsson's machines like nomadik. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-28ARM: 5832/1: ARM: U8500 Makefile.bootSrinidhi Kasagar
The Makefile.boot for the U8500 platform Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-28ARM: 5831/1: ARM: U8500 core machine supportSrinidhi Kasagar
Adds core support for the ST-Ericsson U8500 platform. It supports memory mappings, binds to the existing modules like GIC, SCU, TWD and local timers and sets up the infrastructure for the secondary core. Reviewed-by: Alessandro Rubini <rubini@unipv.it> Reviewed-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-28ARM: 5830/1: ARM: U8500 clock frameworkSrinidhi Kasagar
Adds basic clock framework to the U8500 platform. Currently it just uses the clock lookup table and add the each entry to the clkdevice. More complex clock management to follow soon Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-28ARM: 5829/1: ARM: U8500 register definitionsSrinidhi Kasagar
Adds register definitions, shared peripheral interrupt numbers (SHPI) and IO mappings for the U8500 core support. SHPI are assigned to [160:32] where first 32 interrupts are reserved. Reviewed-by: Alessandro Rubin <rubini@unipv.it> Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-28ARM: 5786/1: Introduce plat-nomadik, MTU code re-organizationSrinidhi Kasagar
Introduce the plat-nomadik folder for ST-Ericsson machines including the existing nomadik 8815 architecture. This also moves the existing MTU (MultiTimerUnit) of nomadik 8815 to the proposed plat-nomadik and adds HAS_MTU. The patch has been re-based to 2.6.32-rc6 Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Alessandro Rubini <rubini@unipv.it> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-27sparc64: Faster early-boot framebuffer console.David S. Miller
Borrow the powerpc bootx text console driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-27RTC: let Dove soc select the rtc-mv driver.Saeed Bishara
Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-27ARM: Add Tauros2 L2 cache controller supportLennert Buytenhek
Support for the Tauros2 L2 cache controller as used with the PJ1 and PJ4 CPUs. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-27ARM: add base support for Marvell Dove SoCSaeed Bishara
The Marvell Dove (88AP510) is a high-performance, highly integrated, low power SoC with high-end ARM-compatible processor (known as PJ4), graphics processing unit, high-definition video decoding acceleration hardware, and a broad range of peripherals. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-27collie: support pda_power driverThomas Kunze
This add the pda-power platform device to collie.
2009-11-27collie: convert to gpiolib for ucb1x00Thomas Kunze
Only the parts used for collie_battery are converted. The rest will be cleaned up later.
2009-11-27add gpiolib support to ucb1x00Thomas Kunze
The old access methods to the gpios will be removed when all users has been converted. (mainly ucb1x00-ts)
2009-11-27SA1100: make gpio_to_irq and reverse a macroThomas Kunze
The function can't be used for static initialisations so convert them to macros.
2009-11-27collie: prepare for gpiolib useThomas Kunze
prefix gpio definitions for direct register access with '_' so we can use the other names for gpio_request & co
2009-11-27collie: fix scoop convesion to new apiThomas Kunze
2009-11-27x86: hpet: Make WARN_ON understandableThomas Gleixner
Andrew complained rightly that the WARN_ON in hpet_next_event() is confusing and the code comment not really helpful. Change it to WARN_ONCE and print the reason in clear text. Change the comment to explain what kind of hardware wreckage we deal with. Pointed-out-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Venki Pallipadi <venkatesh.pallipadi@intel.com>
2009-11-27x86/amd-iommu: Remove amd_iommu_pd_tableJoerg Roedel
The data that was stored in this table is now available in dev->archdata.iommu. So this table is not longer necessary. This patch removes the remaining uses of that variable and removes it from the code. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-11-27x86/amd-iommu: Move reset_iommu_command_buffer out of locked codeJoerg Roedel
This patch removes the ugly contruct where the iommu->lock must be released while before calling the reset_iommu_command_buffer function. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-11-27x86/amd-iommu: Cleanup DTE flushing codeJoerg Roedel
This patch cleans up the code to flush device table entries in the IOMMU. With this chance the driver can get rid of the iommu_queue_inv_dev_entry() function. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-11-27x86/amd-iommu: Introduce iommu_flush_device() functionJoerg Roedel
This patch adds a function to flush a DTE entry for a given struct device and replaces iommu_queue_inv_dev_entry calls with this function where appropriate. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-11-27x86/amd-iommu: Cleanup attach/detach_device codeJoerg Roedel
This patch cleans up the attach_device and detach_device paths and fixes reference counting while at it. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-11-27x86/amd-iommu: Keep devices per domain in a listJoerg Roedel
This patch introduces a list to each protection domain which keeps all devices associated with the domain. This can be used later to optimize certain functions and to completly remove the amd_iommu_pd_table. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
generated by cgit (git 2.34.1) at 2025-09-22 05:01:53 +0000