| Age | Commit message (Collapse) | Author |
|---|
|
On POWER9, when userspace reads the value of the DPDES register on a
vCPU, it is possible for 0 to be returned although there is a doorbell
interrupt pending for the vCPU. This can lead to a doorbell interrupt
being lost across migration. If the guest kernel uses doorbell
interrupts for IPIs, then it could malfunction because of the lost
interrupt.
This happens because a newly-generated doorbell interrupt is signalled
by setting vcpu->arch.doorbell_request to 1; the DPDES value in
vcpu->arch.vcore->dpdes is not updated, because it can only be updated
when holding the vcpu mutex, in order to avoid races.
To fix this, we OR in vcpu->arch.doorbell_request when reading the
DPDES value.
Cc: stable@vger.kernel.org # v4.13+
Fixes: 579006944e0d ("KVM: PPC: Book3S HV: Virtualize doorbell facility on POWER9")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
|
|
When we are running multiple vcores on the same physical core, they
could be from different VMs and so it is possible that one of the
VMs could have its arch.mmu_ready flag cleared (for example by a
concurrent HPT resize) when we go to run it on a physical core.
We currently check the arch.mmu_ready flag for the primary vcore
but not the flags for the other vcores that will be run alongside
it. This adds that check, and also a check when we select the
secondary vcores from the preempted vcores list.
Cc: stable@vger.kernel.org # v4.14+
Fixes: 38c53af85306 ("KVM: PPC: Book3S HV: Fix exclusion between HPT resizing and other HPT updates")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
The __rw_yield and __spin_yield locks only pertain to SPLPAR mode.
Rename them to make this relationship obvious.
Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190813031314.1828-3-cmr@informatik.wtf
|
|
Determining if a processor is in shared processor mode is not a constant
so don't hide it behind a #define.
Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190813031314.1828-2-cmr@informatik.wtf
|
|
Optimise LOAD_REG_IMMEDIATE_SYM() using a temporary register to
parallelise operations.
It reduces the path from 5 to 3 instructions.
Suggested-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bad41ed02531bb0382420cbab50a0d7153b71767.1566311636.git.christophe.leroy@c-s.fr
|
|
LOAD_MSR_KERNEL() and LOAD_REG_IMMEDIATE() are doing the same thing
in the same way. Drop LOAD_MSR_KERNEL()
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8f04a6df0bc8949517fd8236d50c15008ccf9231.1566311636.git.christophe.leroy@c-s.fr
|
|
Today LOAD_REG_IMMEDIATE() is a basic #define which loads all
parts on a value into a register, including the parts that are NUL.
This means always 2 instructions on PPC32 and always 5 instructions
on PPC64. And those instructions cannot run in parallele as they are
updating the same register.
Ex: LOAD_REG_IMMEDIATE(r1,THREAD_SIZE) in head_64.S results in:
3c 20 00 00 lis r1,0
60 21 00 00 ori r1,r1,0
78 21 07 c6 rldicr r1,r1,32,31
64 21 00 00 oris r1,r1,0
60 21 40 00 ori r1,r1,16384
Rewrite LOAD_REG_IMMEDIATE() with GAS macro in order to skip
the parts that are NUL.
Rename existing LOAD_REG_IMMEDIATE() as LOAD_REG_IMMEDIATE_SYM()
and use that one for loading value of symbols which are not known
at compile time.
Now LOAD_REG_IMMEDIATE(r1,THREAD_SIZE) in head_64.S results in:
38 20 40 00 li r1,16384
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d60ce8dd3a383c7adbfc322bf1d53d81724a6000.1566311636.git.christophe.leroy@c-s.fr
|
|
ioremap does things differently depending on whether
SLAB is available or not at different levels.
Try to separate the early path from the beginning.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3acd2dbe04b04f111475e7a59f2b6f2ab9b95ab6.1566309263.git.christophe.leroy@c-s.fr
|
|
PPC32 and PPC64 are doing the same once SLAB is available.
Create a do_ioremap() function that calls get_vm_area and
do the mapping.
For PPC64, we add the 4K PFN hack sanity check to __ioremap_caller()
in order to avoid using __ioremap_at(). Other checks in __ioremap_at()
are irrelevant for __ioremap_caller().
On PPC64, VM area is allocated in the range [ioremap_bot ; IOREMAP_END]
On PPC32, VM area is allocated in the range [VMALLOC_START ; VMALLOC_END]
Lets define IOREMAP_START is ioremap_bot for PPC64, and alias
IOREMAP_START/END to VMALLOC_START/END on PPC32
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/42e7e36ad32e0fdf76692426cc642799c9f689b8.1566309263.git.christophe.leroy@c-s.fr
|
|
book3s64's ioremap_range() is almost same as fallback ioremap_range(),
except that it calls radix__ioremap_range() when radix is enabled.
radix__ioremap_range() is also very similar to the other ones, expect
that it calls ioremap_page_range when slab is available.
PPC32 __ioremap_caller() have a loop doing the same thing as
ioremap_range() so use it on PPC32 as well.
Lets keep only one version of ioremap_range() which calls
ioremap_page_range() on all platforms when slab is available.
At the same time, drop the nid parameter which is not used.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4b1dca7096b01823b101be7338983578641547f1.1566309263.git.christophe.leroy@c-s.fr
|
|
Create ioremap_32.c and ioremap_64.c and move respective ioremap
functions out of pgtable_32.c and pgtable_64.c
In the meantime, fix a few comments and changes a printk() to
pr_warn(). Also fix a few oversplitted lines.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b5c8b02ccefd4ede64c61b53cf64fb5dacb35740.1566309263.git.christophe.leroy@c-s.fr
|
|
Drop multiple definitions of ioremap_bot and make one common to
all subarches.
Only CONFIG_PPC_BOOK3E_64 had a global static init value for
ioremap_bot. Now ioremap_bot is set in early_init_mmu_global().
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/920eebfd9f36f14c79d1755847f5bf7c83703bdd.1566309262.git.christophe.leroy@c-s.fr
|
|
Both ioremap_prot() are idenfical, move them into ioremap.c
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0b3eb0e0f1490a99fd6c983e166fb8946233f151.1566309262.git.christophe.leroy@c-s.fr
|
|
ioremap(), ioremap_wc() and ioremap_coherent() are now identical on
PPC32 and PPC64 as iowa_is_active() will always return false on
PPC32. Move them into a new common location called ioremap.c
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6223803ce024d6ab4dfaa919f44098aed5b4bc33.1566309262.git.christophe.leroy@c-s.fr
|
|
ppc_md.ioremap() is only used for I/O workaround on CELL platform,
so indirect function call can be avoided.
This patch reworks the io-workaround and ioremap() functions to
use the global 'io_workaround_inited' flag for the activation
of io-workaround.
When CONFIG_PPC_IO_WORKAROUNDS or CONFIG_PPC_INDIRECT_MMIO are not
selected, the I/O workaround ioremap() voids and the global flag is
not used.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5fa3ef069fbd0f152512afaae19e7a60161454cf.1566309262.git.christophe.leroy@c-s.fr
|
|
__ioremap() is not used anymore, drop it.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ccc439f481a0884e00a6be1bab44bab2a4477fea.1566309262.git.christophe.leroy@c-s.fr
|
|
ppc_md.iounmap() is never set, drop it.
Once ppc_md.iounmap() is gone, iounmap() remains the only user of
__iounmap() and iounmap() does nothing else than calling __iounmap().
So drop iounmap() and make __iounmap() the new iounmap().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d73ba92bb7a387cc58cc34666d7f5158a45851b0.1566309262.git.christophe.leroy@c-s.fr
|
|
__ioremap() is similar to ioremap_prot() except that ioremap_prot()
does a few sanity changes in addition.
The flags used by PS3 are not impacted by those changes so for
PS3 both functions are equivalent.
At the same time, drop parts of the comment that have been invalid
since commit e58e87adc8bf ("powerpc/mm: Update _PAGE_KERNEL_RO")
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/36bff5d875ff562889c5e12dab63e5d7c5d1fbd8.1566309262.git.christophe.leroy@c-s.fr
|
|
The on chip memory allocator is entirely unused in the kernel tree.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7b1668941ad1041d08b19167030868de5840b153.1566309262.git.christophe.leroy@c-s.fr
|
|
Book3E doesn't have SPRN_SPURR/SPRN_PURR.
Activating ARCH_HAS_SCALED_CPUTIME is just wasting CPU time.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/linuxppc/issues/issues/171
Link: https://lore.kernel.org/r/a8b567c569aa521a7cf1beb061d43d79070e850c.1566492229.git.christophe.leroy@c-s.fr
|
|
Add support for disabling the kernel implemented spectre v2 mitigation
(count cache flush on context switch) via the nospectre_v2 and
mitigations=off cmdline options.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190524024647.381-1-cmr@informatik.wtf
|
|
functions
There are some POWER9 machines where the OPAL firmware does not support
the OPAL_XIVE_GET_QUEUE_STATE and OPAL_XIVE_SET_QUEUE_STATE calls.
The impact of this is that a guest using XIVE natively will not be able
to be migrated successfully. On the source side, the get_attr operation
on the KVM native device for the KVM_DEV_XIVE_GRP_EQ_CONFIG attribute
will fail; on the destination side, the set_attr operation for the same
attribute will fail.
This adds tests for the existence of the OPAL get/set queue state
functions, and if they are not supported, the XIVE-native KVM device
is not created and the KVM_CAP_PPC_IRQ_XIVE capability returns false.
Userspace can then either provide a software emulation of XIVE, or
else tell the guest that it does not have a XIVE controller available
to it.
Cc: stable@vger.kernel.org # v5.2+
Fixes: 3fab2d10588e ("KVM: PPC: Book3S HV: XIVE: Activate XIVE exploitation mode")
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
The xtensa free_initrd_mem() verifies that initrd is mapped and then
frees its memory using free_reserved_area().
The initrd is considered mapped when its memory was successfully reserved
with mem_reserve().
Resetting initrd_start to 0 in case of mem_reserve() failure allows to
switch to generic free_initrd_mem() implementation.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Message-Id: <1563977432-8376-1-git-send-email-rppt@linux.ibm.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
H_PUT_TCE_INDIRECT handlers receive a page with up to 512 TCEs from
a guest. Although we verify correctness of TCEs before we do anything
with the existing tables, there is a small window when a check in
kvmppc_tce_validate might pass and right after that the guest alters
the page of TCEs, causing an early exit from the handler and leaving
srcu_read_lock(&vcpu->kvm->srcu) (virtual mode) or lock_rmap(rmap)
(real mode) locked.
This fixes the bug by jumping to the common exit code with an appropriate
unlock.
Cc: stable@vger.kernel.org # v4.11+
Fixes: 121f80ba68f1 ("KVM: PPC: VFIO: Add in-kernel acceleration for VFIO")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
RPM clock controller has parent as xo, so specify that in DT node for
rpmhcc
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add i.MX8MQ system counter node to enable timer-imx-sysctr
broadcast timer driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Add i.MX8MM system counter node to enable timer-imx-sysctr
broadcast timer driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Although APIC initialization will typically clear out the LDR before
setting it, the APIC cleanup code should reset the LDR.
This was discovered with a 32-bit KVM guest jumping into a kdump
kernel. The stale bits in the LDR triggered a bug in the KVM APIC
implementation which caused the destination mapping for VCPUs to be
corrupted.
Note that this isn't intended to paper over the KVM APIC bug. The kernel
has to clear the LDR when resetting the APIC registers except when X2APIC
is enabled.
This lacks a Fixes tag because missing to clear LDR goes way back into pre
git history.
[ tglx: Made x2apic_enabled a function call as required ]
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190826101513.5080-3-bsd@redhat.com
|
|
Legacy apic init uses bigsmp for smp systems with 8 and more CPUs. The
bigsmp APIC implementation uses physical destination mode, but it
nevertheless initializes LDR and DFR. The LDR even ends up incorrectly with
multiple bit being set.
This does not cause a functional problem because LDR and DFR are ignored
when physical destination mode is active, but it triggered a problem on a
32-bit KVM guest which jumps into a kdump kernel.
The multiple bits set unearthed a bug in the KVM APIC implementation. The
code which creates the logical destination map for VCPUs ignores the
disabled state of the APIC and ends up overwriting an existing valid entry
and as a result, APIC calibration hangs in the guest during kdump
initialization.
Remove the bogus LDR/DFR initialization.
This is not intended to work around the KVM APIC bug. The LDR/DFR
ininitalization is wrong on its own.
The issue goes back into the pre git history. The fixes tag is the commit
in the bitkeeper import which introduced bigsmp support in 2003.
git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Fixes: db7b9e9f26b8 ("[PATCH] Clustered APIC setup for >8 CPU systems")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190826101513.5080-2-bsd@redhat.com
|
|
With recent ti-sysc driver changes, we can probe most devices with device
tree data only and drop the custom "ti,hwmods" property.
We have already added the related device tree data earlier, and have
already dropped the platform data. But we have been still dynamically
allocating the platform data based on "ti,hwmods" property. With recent
ti-sysc driver changes this is no longer needed.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
With recent ti-sysc driver changes, we can probe most devices with device
tree data only and drop the custom "ti,hwmods" property.
We have already added the related device tree data earlier, and have
already dropped the platform data. But we have been still dynamically
allocating the platform data based on "ti,hwmods" property. With recent
ti-sysc driver changes this is no longer needed.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
With recent ti-sysc driver changes, we can probe most devices with device
tree data only and drop the custom "ti,hwmods" property.
We have already added the related device tree data earlier, and have
already dropped the platform data. But we have been still dynamically
allocating the platform data based on "ti,hwmods" property. With recent
ti-sysc driver changes this is no longer needed.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
With recent ti-sysc driver changes, we can probe most devices with device
tree data only and drop the custom "ti,hwmods" property.
We have already added the related device tree data earlier, and have
already dropped the platform data. But we have been still dynamically
allocating the platform data based on "ti,hwmods" property. With recent
ti-sysc driver changes this is no longer needed.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
With recent ti-sysc driver changes, we can probe most devices with device
tree data only and drop the custom "ti,hwmods" property.
Let's drop the legacy platform data and custom "ti,hwmods" property. We
want to do this in a single patch as the "ti,hwmods" property is used to
allocate platform data dynamically that we no longer want to do.
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
With recent ti-sysc driver changes, we can probe most devices with device
tree data only and drop the custom "ti,hwmods" property.
Let's drop the legacy platform data and custom "ti,hwmods" property. We
want to do this in a single patch as the "ti,hwmods" property is used to
allocate platform data dynamically that we no longer want to do.
Cc: Vignesh R <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
This adds support for an optional extra interrupt cell to specify edge
vs level triggered. It is backward compatible with dts files with only
one cell, and will default to level-triggered in such a case.
Note that I had to make a change to idu_irq_set_affinity as well, as
this function was setting the interrupt type to "level" unconditionally,
since this was the only type supported previously.
Signed-off-by: Mischa Jonker <mischa.jonker@synopsys.com>
Reviewed-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
A null pointer would be passed to a call of the function "kfree" directly
after a call of the function "kzalloc" failed at one place.
Remove this superfluous function call.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
<generated/ti-pm-asm-offsets.h> is only generated and included by
arch/arm/mach-omap2/, so it does not need to reside in the globally
visible include/generated/.
I renamed it to arch/arm/mach-omap2/pm-asm-offsets.h since the prefix
'ti-' is just redundant in mach-omap2/.
My main motivation of this change is to avoid the race condition for
the parallel build (-j) when CONFIG_IKHEADERS is enabled.
When it is enabled, all the headers under include/ are archived into
kernel/kheaders_data.tar.xz and exposed in the sysfs.
In the parallel build, we have no idea in which order files are built.
- If ti-pm-asm-offsets.h is built before kheaders_data.tar.xz,
the header will be included in the archive. Probably nobody will
use it, but it is harmless except that it will increase the archive
size needlessly.
- If kheaders_data.tar.xz is built before ti-pm-asm-offsets.h,
the header will not be included in the archive. However, in the next
build, the archive will be re-generated to include the newly-found
ti-pm-asm-offsets.h. This is not nice from the build system point
of view.
- If ti-pm-asm-offsets.h and kheaders_data.tar.xz are built at the
same time, the corrupted header might be included in the archive,
which does not look nice either.
This commit fixes the race.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Based on Tony Lindgren's work for omap34xx, this patch applies the same
functionality to the AM3517.
The following can be tested via sysfs with the following to ensure the SGX
module gets enabled and disabled properly:
0x00010201
Bus error
Cc: Filip Matijević <filip.matijevic.pz@gmail.com>
Cc: "H. Nikolaus Schaller" <hns@goldelico.com>
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Cc: moaz korena <moaz@korena.xyz>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Cc: Philipp Rossak <embed3d@gmail.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
[tony@atomide.com: updated subject, dropped rstctrl info]
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Looks like omap34xx OCP registers are not readable unlike on omap36xx.
We use SGX revision register instead of the OCP revision register for
34xx and do not configure any SYSCONFIG register unlike for 36xx.
I've tested that the interconnect target module enables and idles
just fine with PM runtime control via sys:
# echo on > $(find /sys -name control | grep \/5000); rwmem 0x5000fe10
# rwmem 0x50000014 # SGX revision register on 36xx
0x50000014 = 0x00010205
# echo auto > $(find /sys -name control | grep \/5000)
# rwmem 0x5000fe00
And when idled, it will produce "Bus error" as expected.
Cc: Adam Ford <aford173@gmail.com>
Cc: Filip Matijević <filip.matijevic.pz@gmail.com>
Cc: "H. Nikolaus Schaller" <hns@goldelico.com>
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Cc: moaz korena <moaz@korena.xyz>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Cc: Philipp Rossak <embed3d@gmail.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Adam Ford <aford173@gmail.com> #logicpd-torpedo-37xx-devkit
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
I've tested that the interconnect target module enables and idles
just fine when probed with ti-sysc with PM runtime control via sys:
# echo on > $(find /sys -name control | grep \/5600)
# rwmem 0x5600fe00 # OCP Revision
0x5600fe00 = 0x40000000
# echo auto > $(find /sys -name control | grep \/5600)
# rwmem 0x5600fe10
# rwmem 0x56000024
Cc: Adam Ford <aford173@gmail.com>
Cc: Filip Matijević <filip.matijevic.pz@gmail.com>
Cc: "H. Nikolaus Schaller" <hns@goldelico.com>
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Cc: moaz korena <moaz@korena.xyz>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Cc: Philipp Rossak <embed3d@gmail.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
I've tested that the interconnect target module enables and idles
just fine when probed with ti-sysc with PM runtime control via sys:
# echo on > $(find /sys -name control | grep \/5601)
# rwmem 0x56000024
0x56000024 = 0x00010200 # SGX540 CORE_REVISION
# echo auto > $(find /sys -name control | grep \/5601)
# rwmem 0x56000024
And when idled, it will produce "Bus error" as expected.
Cc: Adam Ford <aford173@gmail.com>
Cc: Filip Matijević <filip.matijevic.pz@gmail.com>
Cc: "H. Nikolaus Schaller" <hns@goldelico.com>
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Cc: moaz korena <moaz@korena.xyz>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Cc: Philipp Rossak <embed3d@gmail.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's configure the related dts data based on what we have
defined in the legacy platform data.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the custom ti,hwmods dts property. We have already
dropped the platform data earlier and have been allocating it
dynamically.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe cpsw with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property for am3 and am4.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Cc: Keerthy <j-keerthy@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We can now probe cpsw with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property for am3 and am4.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Cc: Keerthy <j-keerthy@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
In preparation for dropping legacy platform data and custom ti,hwmods
property, we need to make functional clock available for mdio for the
SoCs so the the mdio driver can find it.
The mdio hardware currently relies on a mdio_hwmod to manage the clock
for omap variants. This is wrong though as there are no separate
sysconfig registers for mdio. All the cpsw related components are just
children of the gmac module.
Note that since mdio is a child of cpsw, just doing pm_runtime_get()
in the mdio driver enables the clock. However, since mdio is also used
by davinci that does not implement runtime PM, let's just add the fck
for now.
Also note that am437x mdio already has a clock, let's update it to
not use the legacy clock naming to unify things further.
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Cc: Keerthy <j-keerthy@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
