summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2014-11-19ARM: shmobile: r8a7790: add DMA nodes for IICWolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: kzm9g-reference dts: Add labels for the LEDsGeert Uytterhoeven
The LEDs on the kzm9g board are labeled using upper-case characters. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: koelsch dts: Add labels for the LEDsGeert Uytterhoeven
The LEDs on the koelsch board are labeled using upper-case characters. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: sh73a0 dtsi: Add SoC-specific IIC compatible propertiesGeert Uytterhoeven
The IIC nodes used the generic compatible properties only. This causes the driver to fail when using Standard Speed, as the operational clock is driven by the 104 MHz HP clock: i2c-sh_mobile e6820000.i2c: timing values out of range: L/H=0x208/0x1bf i2c-sh_mobile: probe of e6820000.i2c failed with error -22 Add the SoC-specific compatible property to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: r8a73a4 dtsi: Add SoC-specific IIC compatible propertiesGeert Uytterhoeven
The IIC nodes used the generic compatible properties only. This may cause the driver to fail when using Standard Speed on IIC masters where the operational clock is driven by the 130 MHz HP clock. Add the SoC-specific compatible property to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: koelsch: Sound DMA support via DVC on DTSKuninori Morimoto
DMA transfer uses DVC DMA DMApp [MEM] -> [SRC] -> [DVC] -> [SSIU] -> [SSI] DMA DMApp [MEM] <- [DVC] <- [SRC] <- [SSIU] <- [SSI] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: koelsch: Sound DMA support via SRC on DTSKuninori Morimoto
DMA transfer to/from SRC DMA DMApp [MEM] -> [SRC] -> [SSIU] -> [SSI] DMA DMApp [MEM] <- [SRC] <- [SSIU] <- [SSI] Current sound driver is supporting SSI/SRC random connection. So, this patch is tring SSI0 -> SRC2 SSI1 <- SRC3 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: koelsch: Sound DMA support via BUSIF on DTSKuninori Morimoto
DMA transfer to/from SSIU DMA [MEM] -> [SSIU] -> [SSI] DMA [MEM] <- [SSIU] <- [SSI] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: koelsch: Sound DMA support on DTSKuninori Morimoto
DMA transfer to/from SSI DMA [MEM] -> [SSI] DMA [MEM] <- [SSI] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: koelsch: Sound PIO support on DTSKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: koelsch: fixup I2C2 clock frequencyKuninori Morimoto
Current Koelsch I2C2 has 400kHz settings, but, ak4643 audio codec chip which is connected to I2C2 can't work such frequency. Fixup I2C2 clock frequency to 100kHz. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: lager: Sound DMA support via DVC on DTSKuninori Morimoto
DMA transfer uses DVC DMA DMApp [MEM] -> [SRC] -> [DVC] -> [SSIU] -> [SSI] DMA DMApp [MEM] <- [DVC] <- [SRC] <- [SSIU] <- [SSI] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: lager: Sound DMA support via SRC on DTSKuninori Morimoto
DMA transfer to/from SRC DMA DMApp [MEM] -> [SRC] -> [SSIU] -> [SSI] DMA DMApp [MEM] <- [SRC] <- [SSIU] <- [SSI] Current sound driver is supporting SSI/SRC random connection. So, this patch is tring SSI0 -> SRC2 SSI1 <- SRC3 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: lager: Sound DMA support via BUSIF on DTSKuninori Morimoto
DMA transfer to/from SSIU DMA [MEM] -> [SSIU] -> [SSI] DMA [MEM] <- [SSIU] <- [SSI] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: lager: Sound DMA support on DTSKuninori Morimoto
DMA transfer to/from SSI DMA [MEM] -> [SSI] DMA [MEM] <- [SSI] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: lager: Sound PIO support on DTSKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-19ARM: shmobile: lager: fixup IIC2 clock frequencyKuninori Morimoto
Current Lager IIC2 is using default clock frequency, but, ak4643 audio codec chip needs 100kHz This patch clarifies IIC2 clock frequency as 100kHz. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-18ARM: dts: berlin: enable USB on the Google ChromecastSebastian Hesselbarth
Enable usb1 on Google Chromecast which is connected to micro-USB plug used for external power supply, too. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-11-18ARM: dts: berlin: add BG2CD nodes for USB supportSebastian Hesselbarth
Adds nodes describing the Marvell Berlin BG2CD USB PHY and USB. The BG2CD SoC has 2 USB ChipIdea controllers, with usb0 host-only and usb1 dual-role capable. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-11-18ARM: dts: Berlin: enable USB on the BG2Q DMPAntoine Tenart
Enable the 2 available USB PHY and USB nodes on the Marvell Berlin BG2Q DMP. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-11-18ARM: dts: berlin: add BG2Q nodes for USB supportAntoine Tenart
Adds nodes describing the Marvell Berlin BG2Q USB PHY and USB. The BG2Q SoC has 3 USB host controller, compatible with ChipIdea. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-11-18ARM: berlin: do not select RESET_CONTROLLERAntoine Tenart
RESET_CONTROLLER is meant to be user-selectable. To respect that, do not select it automatically when using ARCH_BERLIN. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-11-18PPC: bpf_jit_comp: Unify BPF_MOD | BPF_X and BPF_DIV | BPF_XDenis Kirjanov
Reduce duplicated code by unifying BPF_ALU | BPF_MOD | BPF_X and BPF_ALU | BPF_DIV | BPF_X CC: Alexei Starovoitov<alexei.starovoitov@gmail.com> CC: Daniel Borkmann<dborkman@redhat.com> CC: Philippe Bergheaud<felix@linux.vnet.ibm.com> Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-18x86, kaslr: Handle Gold linker for finding bss/brkKees Cook
When building with the Gold linker, the .bss and .brk areas of vmlinux are shown as consecutive instead of having the same file offset. Allow for either state, as long as things add up correctly. Fixes: e6023367d779 ("x86, kaslr: Prevent .bss from overlaping initrd") Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Junjie Mao <eternal.n08@gmail.com> Link: http://lkml.kernel.org/r/20141118001604.GA25045@www.outflux.net Cc: stable@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-18x86, mm: Set NX across entire PMD at bootKees Cook
When setting up permissions on kernel memory at boot, the end of the PMD that was split from bss remained executable. It should be NX like the rest. This performs a PMD alignment instead of a PAGE alignment to get the correct span of memory. Before: ---[ High Kernel Mapping ]--- ... 0xffffffff8202d000-0xffffffff82200000 1868K RW GLB NX pte 0xffffffff82200000-0xffffffff82c00000 10M RW PSE GLB NX pmd 0xffffffff82c00000-0xffffffff82df5000 2004K RW GLB NX pte 0xffffffff82df5000-0xffffffff82e00000 44K RW GLB x pte 0xffffffff82e00000-0xffffffffc0000000 978M pmd After: ---[ High Kernel Mapping ]--- ... 0xffffffff8202d000-0xffffffff82200000 1868K RW GLB NX pte 0xffffffff82200000-0xffffffff82e00000 12M RW PSE GLB NX pmd 0xffffffff82e00000-0xffffffffc0000000 978M pmd [ tglx: Changed it to roundup(_brk_end, PMD_SIZE) and added a comment. We really should unmap the reminder along with the holes caused by init,initdata etc. but thats a different issue ] Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Wang Nan <wangnan0@huawei.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20141114194737.GA3091@www.outflux.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-18x86, microcode: Update BSPs microcode on resumeBorislav Petkov
In the situation when we apply early microcode but do *not* apply late microcode, we fail to update the BSP's microcode on resume because we haven't initialized the uci->mc microcode pointer. So, in order to alleviate that, we go and dig out the stashed microcode patch during early boot. It is basically the same thing that is done on the APs early during boot so do that too here. Tested-by: alex.schnaidt@gmail.com Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=88001 Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: <stable@vger.kernel.org> # v3.9 Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/20141118094657.GA6635@pd.tnic Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-18s390/irq: use irq 0Sebastian Ott
Irq 0 is currently unused on s390. Since there is no reason to do this start counting at the beginning and gain an additional irq. Also correctly report the smallest usable irq number for dynamic allocation. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-11-18s390/io: add ioport_map stubsFrank Blaschka
add ioport_map stubs to make vfio build on s390. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-11-18arm64/mm: Remove hack in mmap randomize layoutYann Droneaud
Since commit 8a0a9bd4db63 ('random: make get_random_int() more random'), get_random_int() returns a random value for each call, so comment and hack introduced in mmap_rnd() as part of commit 1d18c47c735e ('arm64: MMU fault handling and page table management') are incorrects. Commit 1d18c47c735e seems to use the same hack introduced by commit a5adc91a4b44 ('powerpc: Ensure random space between stack and mmaps'), latter copied in commit 5a0efea09f42 ('sparc64: Sharpen address space randomization calculations.'). But both architectures were cleaned up as part of commit fa8cbaaf5a68 ('powerpc+sparc64/mm: Remove hack in mmap randomize layout') as hack is no more needed since commit 8a0a9bd4db63. So the present patch removes the comment and the hack around get_random_int() on AArch64's mmap_rnd(). Cc: David S. Miller <davem@davemloft.net> Cc: Anton Blanchard <anton@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-11-18ARM: dts: meson: add I2C controller nodesBeniamino Galvani
Add nodes for I2C controllers A,B,AO, which are available in both Meson6 and Meson8. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Carlo Caione <carlo@caione.org>
2014-11-18ARM: common: edma: add suspend resume hookDaniel Mack
This patch makes the edma driver resume correctly after suspend. Tested on an AM33xx platform with cyclic audio streams and omap_hsmmc. All information can be reconstructed by already known runtime information. As we now use some functions that were previously only used from __init context, annotations had to be dropped. [nm@ti.com: added error handling for runtime + suspend_late/early_resume] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Daniel Mack <zonque@gmail.com> Tested-by: Joel Fernandes <joelf@ti.com> Acked-by: Joel Fernandes <joelf@ti.com> [nsekhar@ti.com: remove unneeded pm_runtime_get_sync() from resume] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2014-11-18ARM: davinci: Remove redundant castsRasmus Villemoes
These casts to char* are unnecessary and slightly confusing, since both operands actually have type const char*. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2014-11-18ARM: davinci: Use standard logging stylesJoe Perches
Convert printks to pr_<level> and pr_warning to pr_warn. Other miscellanea: o Coalesce formats o Realign arguments o Use %s, __func__ instead of embedded function names o Add pr_fmt to mityomapl138 and mux Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2014-11-18ARM: meson: DTS: enable L2 cacheBeniamino Galvani
This enables the L2 cache controller available in Amlogic SoCs. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Carlo Caione <carlo@caione.org>
2014-11-18ARM: dts: add dtsi for Amlogic Meson8 SoCsBeniamino Galvani
This adds a dtsi for Amlogic Meson8 SoCs. It differs from the Meson6 dtsi for the number of Cortex-A9 cores (4 vs 2) and for the frequency of clk81. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Carlo Caione <carlo@caione.org>
2014-11-18ARM: meson: enable L2 cacheBeniamino Galvani
This enables the L2 cache controller available in Amlogic SoCs. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Carlo Caione <carlo@caione.org>
2014-11-18ARM: meson: add meson8 supportBeniamino Galvani
Add a MACH_MESON8 symbol and add "amlogic,meson8" to the list of compatible strings for the Meson DT machine to support devices based on the Meson8 family of SoCs. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Carlo Caione <carlo@caione.org>
2014-11-18DTS: meson: Add forgotten compatible in board DTSCarlo Caione
The board DTS is missing the machine compatible. Signed-off-by: Carlo Caione <carlo@caione.org>
2014-11-18ARM: multi_v7_defconfig: Enable stih415/6 usb2 phy driver.Peter Griffin
This driver is used by the ehci / ohci usb controllers on stih415/6 SoCs. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-11-18ARM: multi_v7_defconfig: Enable st ohci and ehci HCD drivers.Peter Griffin
Enable the ehci and ohci drivers in the multi_v7_defconfig so that the USB controllers on stih41x work by default. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-11-18ARM: STi: DT: STiH416: Change miphy356 node name to phy@fe382000Peter Griffin
Following Arnds review comments, update the miphy365 to follow the common convention of naming the phy node names as phy@addr. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-11-18ARM: STi: DT: STih407: STih410: Add clk_ignore_unused to kernel bootargsPeter Griffin
At the moment we don't take a reference on some core interconnect clocks which means when CCF turns off unused clocks the SoC will hang. As a temp soltuion we will boot with clk_ignore_unused parameter for all b2120 boards. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-11-18ARM: STi: DT: STiH410: Add STiH410 SoC and b2120 board support.Peter Griffin
The STiH410 is an advanced multi-HD AVC processor with 3D graphics acceleration and 1.5-GHz ARM Cortex-A9 SMP CPU part of the stih407 family. It has wide connectivity including USB 3.0, PCI-e, SATA and gigabit ethernet. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-11-18ARM: STi: DT: STih407: Abstract common dt nodes into shared files.Peter Griffin
The stih410 soc which will be added in the following commit is very similar to the stih407, to enable maximum re-use of the dt files this commit abstracts the common parts into a shared dt file stihxxx-b2120 for the board, and also a shared file stih407-family.dtsi for the SoC. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-11-18ARM: STi: DT: STiH410: Add pinctl config for usb controllers.Peter Griffin
This patch adds the required pin configiguration for the extra usb controllers found on the stih410 device. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-11-18ARM: STi: DT: STiH416: Add DT nodes for the ehci and ohci usb controllers.Peter Griffin
This patch adds the DT nodes for the 4 usb ehci and ohci usb controllers on the stih416 SoC. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-11-18ARM: STi: DT: STiH416: Add DT node for the stih415/6 usb2 phyPeter Griffin
This usb picophy is found on stih415/6 SoC. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-11-18ARM: STi: DT: STiH416: Add pinctl setup for usb controllers.Peter Griffin
This patch adds the required pin config for all usb controllers on the stih416. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-11-18powerpc/iommu: Rename iommu_[un]map_sg functionsJoerg Roedel
The IOMMU-API gained support for a new iommu_map_sg function. This causes compile failures on powerpc because the function name is already globally used there. This patch renames adds a ppc_ prefix to these functions to solve the compile problem. Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-11-18kvm: x86: vmx: remove MMIO_MAX_GENTiejun Chen
MMIO_MAX_GEN is the same as MMIO_GEN_MASK. Use only one. Signed-off-by: Tiejun Chen <tiejun.chen@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-16 02:06:22 +0000