summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2019-10-04arm64: dts: rockchip: fix Rockpro64 RK808 interrupt lineHugh Cole-Baker
Fix the pinctrl and interrupt specifier for RK808 to use GPIO3_B2. On the Rockpro64 schematic [1] page 16, it shows GPIO3_B2 used for the interrupt line PMIC_INT_L from the RK808, and there's a note which translates as: "PMU termination GPIO1_C5 changed to this". Tested by setting an RTC wakealarm and checking /proc/interrupts counters. Without this patch, neither the rockchip_gpio_irq counter for the RK808, nor the RTC alarm counter increment when the alarm time is reached. With this patch, both interrupt counters increment by 1 as expected. [1] http://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf Fixes: e4f3fb490967 ("arm64: dts: rockchip: add initial dts support for Rockpro64") Signed-off-by: Hugh Cole-Baker <sigmaris@gmail.com> Link: https://lore.kernel.org/r/20190921131457.36258-1-sigmaris@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-10-03ARM: omap2plus_defconfig: Fix selected panels after generic panel changesTony Lindgren
The old omapdrm panels got removed for v5.4 in favor of generic panels, and the Kconfig options changed. Let's update omap2plus_defconfig accordingly so the same panels are still enabled. Cc: Jyri Sarha <jsarha@ti.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-03Merge tag 'omap-for-v5.4/fixes-rc1-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.4-rc cycle Here are fixes for omaps to deal with few regressions, and to fix more boot time errors and warnings: - The recent ti-sysc interconnect target module driver changes had incorrect clock bits for both clocks and dts that cause warnings - For omap3-gta04, gpio changes caused the LCD to break a while back, and after discussing things the right fix is to set spi-cs-high - Recent omapdrm changes to use generic panels caused tfp410 to be disabled as we now must enable the generic support for it in defconfig - Recent omapdrm and backlight changes also finally made droid4 LCD to work, so let's enable it in the defconfig it can be used out of the box. This is not strictly a fix, but we still also have the older CONFIG_MFD_TI_LMU options available so this cuts down the confusion for trying to guess which display and which backlight is needed - Recent ti-sysc interconnect target module changes need the gpio module disabled on some boards, but this now needs to happen at the module level, not at the gpio driver level - Recent changes to probe system timers with ti-sysc caused warnings about mismatch in syconfig registers, so let's configure the option for RESET_STATUS as available in the TRMs - Recent changes to probe LCDC with ti-sysc caused warnings about mismatch in sysconfig registers, so let's configure the missing idlemodes for both platform data and dts as documented in TRMs - Since we moved mach-omap2 to probe with device tree, we've been getting voltage controller warnings. Turns out this code is no longer needed, so let's just remove omap2_set_init_voltage() to get rid of the pointless warnings - Configure am4372 dispc memory bandwidth to avoid underflow errors * tag 'omap-for-v5.4/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am4372: Set memory bandwidth limit for DISPC ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage() ARM: OMAP2+: Add missing LCDC midlemode for am335x ARM: OMAP2+: Fix missing reset done flag for am3 and am43 ARM: dts: Fix gpio0 flags for am335x-icev2 ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules ARM: omap2plus_defconfig: Enable DRM_TI_TFP410 DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again ARM: dts: Fix wrong clocks for dra7 mcasp clk: ti: dra7: Fix mcasp8 clock bits Link: https://lore.kernel.org/r/pull-1570040410-308159@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-03KVM: nVMX: Fix consistency check on injected exception error codeSean Christopherson
Current versions of Intel's SDM incorrectly state that "bits 31:15 of the VM-Entry exception error-code field" must be zero. In reality, bits 31:16 must be zero, i.e. error codes are 16-bit values. The bogus error code check manifests as an unexpected VM-Entry failure due to an invalid code field (error number 7) in L1, e.g. when injecting a #GP with error_code=0x9f00. Nadav previously reported the bug[*], both to KVM and Intel, and fixed the associated kvm-unit-test. [*] https://patchwork.kernel.org/patch/11124749/ Reported-by: Nadav Amit <namit@vmware.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-03Merge tag 'kvmarm-fixes-5.4-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm fixes for 5.4, take #1 - Remove the now obsolete hyp_alternate_select construct - Fix the TRACE_INCLUDE_PATH macro in the vgic code
2019-10-03KVM: x86: omit absent pmu MSRs from MSR listPaolo Bonzini
INTEL_PMC_MAX_GENERIC is currently 32, which exceeds the 18 contiguous MSR indices reserved by Intel for event selectors. Since some machines actually have MSRs past the reserved range, these may survive the filtering of msrs_to_save array and would be rejected by KVM_GET/SET_MSR. To avoid this, cut the list to whatever CPUID reports for the host's architectural PMU. Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com> Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Jim Mattson <jmattson@google.com> Fixes: e2ada66ec418 ("kvm: x86: Add Intel PMU MSRs to msrs_to_save[]", 2019-08-21) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-02mips: Loongson: Fix the link time qualifier of 'serial_exit()'Christophe JAILLET
'exit' functions should be marked as __exit, not __init. Fixes: 85cc028817ef ("mips: make loongsoon serial driver explicitly modular") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: chenhc@lemote.com Cc: ralf@linux-mips.org Cc: jhogan@kernel.org Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: kernel-janitors@vger.kernel.org
2019-10-02MIPS: init: Prevent adding memory before PHYS_OFFSETThomas Bogendoerfer
On some SGI machines (IP28 and IP30) a small region of memory is mirrored to pyhsical address 0 for exception vectors while rest of the memory is reachable at a higher physical address. ARC PROM marks this region as reserved, but with commit a94e4f24ec83 ("MIPS: init: Drop boot_mem_map") this chunk is used, when searching for start of ram, which breaks at least IP28 and IP30 machines. To fix this add_region_memory() checks for start address < PHYS_OFFSET and ignores these chunks. Fixes: a94e4f24ec83 ("MIPS: init: Drop boot_mem_map") Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2019-10-02MIPS: init: Fix reservation of memory between PHYS_OFFSET and mem startThomas Bogendoerfer
Fix calculation of the size for reserving memory between PHYS_OFFSET and real memory start. Fixes: a94e4f24ec83 ("MIPS: init: Drop boot_mem_map") Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2019-10-02MIPS: VDSO: Fix build for binutils < 2.25Paul Burton
Versions of binutils prior to 2.25 are unable to link our VDSO due to an unsupported R_MIPS_PC32 relocation generated by the ".word _start - ." line of the inline asm in get_vdso_base(). As such, the intent is that when building with binutils older than 2.25 we don't build code for gettimeofday() & friends in the VDSO that rely upon get_vdso_base(). Commit 24640f233b46 ("mips: Add support for generic vDSO") converted us to using generic VDSO infrastructure, and as part of that the gettimeofday() functionality moved to a new vgettimeofday.c file. The check for binutils < 2.25 wasn't updated to handle this new filename, and so it continues trying to remove the old unused filename from the build. The end result is that we try to include the gettimeofday() code in builds that will fail to link. Fix this by updating the binutils < 2.25 case to remove vgettimeofday.c from obj-vdso-y, rather than gettimeofday.c. Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: 24640f233b46 ("mips: Add support for generic vDSO") Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: linux-mips@vger.kernel.org
2019-10-02MIPS: VDSO: Remove unused gettimeofday.cPaul Burton
arch/mips/vdso/gettimeofday.c has been unused since commit 24640f233b46 ("mips: Add support for generic vDSO"). Remove the dead code. Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: 24640f233b46 ("mips: Add support for generic vDSO") Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: linux-mips@vger.kernel.org
2019-10-02MIPS: Wire up clone3 syscallPaul Burton
Wire up the new clone3 syscall for MIPS, using save_static_function() to generate a wrapper that saves registers $s0-$s7 prior to invoking the generic sys_clone3 function just like we do for plain old clone. Tested atop 64r6el_defconfig using o32, n32 & n64 builds of the simple test program from: https://lore.kernel.org/lkml/20190716130631.tohj4ub54md25dys@brauner.io/ Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Christian Brauner <christian@brauner.io> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: linux-mips@vger.kernel.org
2019-10-02MIPS: octeon: Include required header; fix octeon ethernet buildPaul Burton
Commit 171a9bae68c7 ("staging/octeon: Allow test build on !MIPS") moved the inclusion of a bunch of headers by various files in the Octeon ethernet driver into a common header, but in doing so it changed the order in which those headers are included. Prior to the referenced commit drivers/staging/octeon/ethernet.c included asm/octeon/cvmx-pip.h before asm/octeon/cvmx-ipd.h, which makes use of the CVMX_PIP_SFT_RST definition pulled in by the former. After commit 171a9bae68c7 ("staging/octeon: Allow test build on !MIPS") we pull in asm/octeon/cvmx-ipd.h first & builds fail with: In file included from drivers/staging/octeon/octeon-ethernet.h:27, from drivers/staging/octeon/ethernet.c:22: arch/mips/include/asm/octeon/cvmx-ipd.h: In function 'cvmx_ipd_free_ptr': arch/mips/include/asm/octeon/cvmx-ipd.h:330:27: error: storage size of 'pip_sft_rst' isn't known union cvmx_pip_sft_rst pip_sft_rst; ^~~~~~~~~~~ arch/mips/include/asm/octeon/cvmx-ipd.h:331:36: error: 'CVMX_PIP_SFT_RST' undeclared (first use in this function); did you mean 'CVMX_CIU_SOFT_RST'? pip_sft_rst.u64 = cvmx_read_csr(CVMX_PIP_SFT_RST); ^~~~~~~~~~~~~~~~ CVMX_CIU_SOFT_RST arch/mips/include/asm/octeon/cvmx-ipd.h:331:36: note: each undeclared identifier is reported only once for each function it appears in arch/mips/include/asm/octeon/cvmx-ipd.h:330:27: warning: unused variable 'pip_sft_rst' [-Wunused-variable] union cvmx_pip_sft_rst pip_sft_rst; ^~~~~~~~~~~ make[4]: *** [scripts/Makefile.build:266: drivers/staging/octeon/ethernet.o] Error 1 make[3]: *** [scripts/Makefile.build:509: drivers/staging/octeon] Error 2 Fix this by having asm/octeon/cvmx-ipd.h include the asm/octeon/cvmx-pip-defs.h header that it is reliant upon, rather than requiring its users to pull in that header before it. Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: 171a9bae68c7 ("staging/octeon: Allow test build on !MIPS") Cc: David S. Miller <davem@davemloft.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: linux-mips@vger.kernel.org Cc: David S . Miller <davem@davemloft.net> Cc: Matthew Wilcox <willy@infradead.org>
2019-10-02xen/efi: have a common runtime setup functionJuergen Gross
Today the EFI runtime functions are setup in architecture specific code (x86 and arm), with the functions themselves living in drivers/xen as they are not architecture dependent. As the setup is exactly the same for arm and x86 move the setup to drivers/xen, too. This at once removes the need to make the single functions global visible. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> [boris: "Dropped EXPORT_SYMBOL_GPL(xen_efi_runtime_setup)"] Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2019-10-01arm: xen: mm: use __GPF_DMA32 for arm64Peng Fan
arm64 shares some code under arch/arm/xen, including mm.c. However ZONE_DMA is removed by commit ad67f5a6545("arm64: replace ZONE_DMA with ZONE_DMA32"). So add a check if CONFIG_ZONE_DMA32 is enabled use __GFP_DMA32. Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2019-10-01riscv: Fix memblock reservation for device tree blobAlbert Ou
This fixes an error with how the FDT blob is reserved in memblock. An incorrect physical address calculation exposed the FDT header to unintended corruption, which typically manifested with of_fdt_raw_init() faulting during late boot after fdt_totalsize() returned a wrong value. Systems with smaller physical memory sizes more frequently trigger this issue, as the kernel is more likely to allocate from the DMA32 zone where bbl places the DTB after the kernel image. Commit 671f9a3e2e24 ("RISC-V: Setup initial page tables in two stages") changed the mapping of the DTB to reside in the fixmap area. Consequently, early_init_fdt_reserve_self() cannot be used anymore in setup_bootmem() since it relies on __pa() to derive a physical address, which does not work with dtb_early_va that is no longer a valid kernel logical address. The reserved[0x1] region shows the effect of the pointer underflow resulting from the __pa(initial_boot_params) offset subtraction: [ 0.000000] MEMBLOCK configuration: [ 0.000000] memory size = 0x000000001fe00000 reserved size = 0x0000000000a2e514 [ 0.000000] memory.cnt = 0x1 [ 0.000000] memory[0x0] [0x0000000080200000-0x000000009fffffff], 0x000000001fe00000 bytes flags: 0x0 [ 0.000000] reserved.cnt = 0x2 [ 0.000000] reserved[0x0] [0x0000000080200000-0x0000000080c2dfeb], 0x0000000000a2dfec bytes flags: 0x0 [ 0.000000] reserved[0x1] [0xfffffff080100000-0xfffffff080100527], 0x0000000000000528 bytes flags: 0x0 With the fix applied: [ 0.000000] MEMBLOCK configuration: [ 0.000000] memory size = 0x000000001fe00000 reserved size = 0x0000000000a2e514 [ 0.000000] memory.cnt = 0x1 [ 0.000000] memory[0x0] [0x0000000080200000-0x000000009fffffff], 0x000000001fe00000 bytes flags: 0x0 [ 0.000000] reserved.cnt = 0x2 [ 0.000000] reserved[0x0] [0x0000000080200000-0x0000000080c2dfeb], 0x0000000000a2dfec bytes flags: 0x0 [ 0.000000] reserved[0x1] [0x0000000080e00000-0x0000000080e00527], 0x0000000000000528 bytes flags: 0x0 Fixes: 671f9a3e2e24 ("RISC-V: Setup initial page tables in two stages") Signed-off-by: Albert Ou <aou@eecs.berkeley.edu> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-10-01RISC-V: Clear load reservations while restoring hart contextsPalmer Dabbelt
This is almost entirely a comment. The bug is unlikely to manifest on existing hardware because there is a timeout on load reservations, but manifests on QEMU because there is no timeout. Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-10-01MIPS: cpu-bugs64: Mark inline functions as __always_inlineJiaxun Yang
Commit ac7c3e4ff401 ("compiler: enable CONFIG_OPTIMIZE_INLINING forcibly") allows compiler to uninline functions marked as 'inline'. Leading to section mismatch in this case. Since we're using const variables to pass assembly flags, 'inline's can't be dropped. So we simply mark them as __always_inline. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: linux-mips@vger.kernel.org [paul.burton@mips.com: - Annotate these functions with __init, even if it only serves to inform human readers when the code can be used. - Drop the __always_inline from check_daddi() & check_daddiu() which don't use arguments as immediates in inline asm. - Rewrap the commit message.] Signed-off-by: Paul Burton <paul.burton@mips.com>
2019-10-01ARM: xen: unexport HYPERVISOR_platform_op functionStefano Stabellini
HYPERVISOR_platform_op() is an inline function and should not be exported. Since commit 15bfc2348d54 ("modpost: check for static EXPORT_SYMBOL* functions"), this causes a warning: WARNING: "HYPERVISOR_platform_op" [vmlinux] is a static EXPORT_SYMBOL_GPL Instead, export the underlying function called by the static inline: HYPERVISOR_platform_op_raw. Fixes: 15bfc2348d54 ("modpost: check for static EXPORT_SYMBOL* functions") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2019-10-01x86: Use the correct SPDX License Identifier in headersNishad Kamdar
Correct the SPDX License Identifier format in a couple of headers. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Waiman Long <longman@redhat.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/697848ff866ade29e78e872525d7a3067642fd37.1555427420.git.nishadkamdar@gmail.com
2019-10-01ARM: dts: ux500: Fix up the CPU thermal zoneLinus Walleij
This fixes up the default ux500 CPU thermal zone: - Set polling delay to 0 and explain why - Set passive polling delay to 250 - Remove restrictions from the CPU cooling device, we should use all cpufreq steps to cool down if needed. Link: https://lore.kernel.org/r/20191001074628.8122-1-linus.walleij@linaro.org Fixes: b786a05f6ce4 ("ARM: dts: ux500: Update thermal zone") Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-01kvm: vmx: Limit guest PMCs to those supported on the hostJim Mattson
KVM can only virtualize as many PMCs as the host supports. Limit the number of generic counters and fixed counters to the number of corresponding counters supported on the host, rather than to INTEL_PMC_MAX_GENERIC and INTEL_PMC_MAX_FIXED, respectively. Note that INTEL_PMC_MAX_GENERIC is currently 32, which exceeds the 18 contiguous MSR indices reserved by Intel for event selectors. Since the existing code relies on a contiguous range of MSR indices for event selectors, it can't possibly work for more than 18 general purpose counters. Fixes: f5132b01386b5a ("KVM: Expose a version 2 architectural PMU to a guests") Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Marc Orr <marcorr@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-01crypto: arm/aes-ce - add dependency on AES libraryArd Biesheuvel
The ARM accelerated AES driver depends on the new AES library for its non-SIMD fallback so express this in its Kconfig declaration. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-10-01crypto: arm/aes-ce - build for v8 architecture explicitlyArd Biesheuvel
The NEON/Crypto Extensions based AES implementation for 32-bit ARM can be built in a kernel that targets ARMv6 CPUs and higher, even though the actual code will not be able to run on that generation, but it allows for a portable image to be generated that can will use the special instructions only when they are available. Since those instructions are part of a FPU profile rather than a CPU profile, we don't override the architecture in the assembler code, and most of the scalar code is simple enough to be ARMv6 compatible. However, that changes with commit c61b1607ed4fbbf2, which introduces calls to the movw/movt instructions, which are v7+ only. So override the architecture in the .S file to armv8-a, which matches the architecture specification in the crypto-neon-fp-armv8 FPU specificier that we already using. Note that using armv7-a here may trigger an issue with the upcoming Clang 10 release, which no longer permits .arch/.fpu combinations it views as incompatible. Reported-by: kbuild test robot <lkp@intel.com> Fixes: c61b1607ed4fbbf2 ("crypto: arm/aes-ce - implement ciphertext stealing ...") Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-10-01arm64/sve: Fix wrong free for task->thread.sve_stateMasayoshi Mizuma
The system which has SVE feature crashed because of the memory pointed by task->thread.sve_state was destroyed by someone. That is because sve_state is freed while the forking the child process. The child process has the pointer of sve_state which is same as the parent's because the child's task_struct is copied from the parent's one. If the copy_process() fails as an error on somewhere, for example, copy_creds(), then the sve_state is freed even if the parent is alive. The flow is as follows. copy_process p = dup_task_struct => arch_dup_task_struct *dst = *src; // copy the entire region. : retval = copy_creds if (retval < 0) goto bad_fork_free; : bad_fork_free: ... delayed_free_task(p); => free_task => arch_release_task_struct => fpsimd_release_task => __sve_free => kfree(task->thread.sve_state); // free the parent's sve_state Move child's sve_state = NULL and clearing TIF_SVE flag to arch_dup_task_struct() so that the child doesn't free the parent's one. There is no need to wait until copy_process() to clear TIF_SVE for dst, because the thread flags for dst are initialized already by copying the src task_struct. This change simplifies the code, so get rid of comments that are no longer needed. As a note, arm64 used to have thread_info on the stack. So it would not be possible to clear TIF_SVE until the stack is initialized. From commit c02433dd6de3 ("arm64: split thread_info from task stack"), the thread_info is part of the task, so it should be valid to modify the flag from arch_dup_task_struct(). Cc: stable@vger.kernel.org # 4.15.x- Fixes: bc0ee4760364 ("arm64/sve: Core task context handling") Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Reported-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Suggested-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Tested-by: Julien Grall <julien.grall@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-10-01arm64: errata: Update stale commentThierry Reding
Commit 73f381660959 ("arm64: Advertise mitigation of Spectre-v2, or lack thereof") renamed the caller of the install_bp_hardening_cb() function but forgot to update a comment, which can be confusing when trying to follow the code flow. Fixes: 73f381660959 ("arm64: Advertise mitigation of Spectre-v2, or lack thereof") Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-10-01s390/qdio: clarify size of the QIB parm areaJulian Wiedmann
The QIB parm area is 128 bytes long. Current code consistently misuses an _entirely unrelated_ QDIO constant, merely because it has the same value. Stop doing so. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Reviewed-by: Jens Remus <jremus@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-10-01s390/cpumf: Fix indentation in sampling device driverThomas Richter
Fix indentation in the s390 CPU Measuement Facility sampling device dirver. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-10-01s390/cpumsf: Check for CPU Measurement samplingThomas Richter
s390 IBM z15 introduces a check if the CPU Mesurement Facility sampling is temporarily unavailable. If this is the case return -EBUSY and abort the setup of CPU Measuement facility sampling. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-10-01s390/cpumf: Use consistant debug print formatThomas Richter
Use consistant debug print format of the form variable blank value. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-10-01xen/efi: Set nonblocking callbacksRoss Lagerwall
Other parts of the kernel expect these nonblocking EFI callbacks to exist and crash when running under Xen. Since the implementations of xen_efi_set_variable() and xen_efi_query_variable_info() do not take any locks, use them for the nonblocking callbacks too. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-10-01kbuild: remove ar-option and KBUILD_ARFLAGSMasahiro Yamada
Commit 40df759e2b9e ("kbuild: Fix build with binutils <= 2.19") introduced ar-option and KBUILD_ARFLAGS to deal with old binutils. According to Documentation/process/changes.rst, the current minimal supported version of binutils is 2.21 so you can assume the 'D' option is always supported. Not only GNU ar but also llvm-ar supports it. With the 'D' option hard-coded, there is no more user of ar-option or KBUILD_ARFLAGS. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com>
2019-09-30arm64: dts: Fix gpio to pinmux mappingRayagonda Kokatanur
There are total of 151 non-secure gpio (0-150) and four pins of pinmux (91, 92, 93 and 94) are not mapped to any gpio pin, hence update same in DT. Fixes: 8aa428cc1e2e ("arm64: dts: Add pinctrl DT nodes for Stingray SOC") Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-09-30MIPS: dts: ar9331: fix interrupt-controller sizeOleksij Rempel
It is two registers each of 4 byte. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2019-09-30MIPS: Loongson64: Fix boot failure after dropping boot_mem_mapHuacai Chen
From commit a94e4f24ec83 ("MIPS: init: Drop boot_mem_map") onwards, add_memory_region() is handled by memblock_add()/memblock_reserve() directly and all bootmem API should be converted to memblock API. Otherwise it will lead to boot failure, especially in the NUMA case because add_memory_region lose the node_id information. Fixes: a94e4f24ec836c8984f83959 ("MIPS: init: Drop boot_mem_map") Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> [paul.burton@mips.com: - Invert node_id check to de-indent the switch statement & avoid lines over 80 characters. - Fixup commit reference in commit message.] Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-mips@vger.kernel.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: Huacai Chen <chenhuacai@gmail.com>
2019-09-30arm64: dts: allwinner: a64: sopine-baseboard: Add PHY regulator delayJernej Skrabec
It turns out that sopine-baseboard needs same fix as pine64-plus for ethernet PHY. Here too Realtek ethernet PHY chip needs additional power on delay to properly initialize. Datasheet mentions that chip needs 30 ms to be properly powered on and that it needs some more time to be initialized. Fix that by adding 100ms ramp delay to regulator responsible for powering PHY. Note that issue was found out and fix tested on pine64-lts, but it's basically the same as sopine-baseboard, only layout and connectors differ. Fixes: bdfe4cebea11 ("arm64: allwinner: a64: add Ethernet PHY regulator for several boards") Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-09-30arm64: dts: allwinner: a64: Drop PMU nodeVasily Khoruzhick
Looks like PMU in A64 is broken, it generates no interrupts at all and as result 'perf top' shows no events. Tested on Pine64-LTS. Fixes: 34a97fcc71c2 ("arm64: dts: allwinner: a64: Add PMU node") Cc: Harald Geyer <harald@ccbib.org> Cc: Jared D. McNeill <jmcneill@NetBSD.org> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Emmanuel Vadot <manu@FreeBSD.org> Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-09-30arm64: dts: allwinner: a64: pine64-plus: Add PHY regulator delayJernej Skrabec
Depending on kernel and bootloader configuration, it's possible that Realtek ethernet PHY isn't powered on properly. According to the datasheet, it needs 30ms to power up and then some more time before it can be used. Fix that by adding 100ms ramp delay to regulator responsible for powering PHY. Fixes: 94dcfdc77fc5 ("arm64: allwinner: pine64-plus: Enable dwmac-sun8i") Suggested-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-09-30arm64/ARM: configs: Change CONFIG_REMOTEPROC from m to yKeerthy
Commit 6334150e9a36 ("remoteproc: don't allow modular build") changes CONFIG_REMOTEPROC to a boolean from a tristate config option which inhibits all defconfigs marking CONFIG_REMOTEPROC as a module in compiling the remoteproc and dependent config options. So fix the configs to have CONFIG_REMOTEPROC built in. Link: https://lore.kernel.org/r/20190920075946.13282-5-j-keerthy@ti.com Fixes: 6334150e9a36 ("remoteproc: don't allow modular build") Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Will Deacon <will@kernel.org> [olof: Fixed up all 4 occurrances in this one commit] Signed-off-by: Olof Johansson <olof@lixom.net>
2019-09-30Merge tag 'csky-for-linus-5.4-rc1' of git://github.com/c-sky/csky-linuxLinus Torvalds
Pull csky updates from Guo Ren: "This round of csky subsystem just some fixups: - Fix mb() synchronization problem - Fix dma_alloc_coherent with PAGE_SO attribute - Fix cache_op failed when cross memory ZONEs - Optimize arch_sync_dma_for_cpu/device with dma_inv_range - Fix ioremap function losing - Fix arch_get_unmapped_area() implementation - Fix defer cache flush for 610 - Support kernel non-aligned access - Fix 610 vipt cache flush mechanism - Fix add zero_fp fixup perf backtrace panic - Move static keyword to the front of declaration - Fix csky_pmu.max_period assignment - Use generic free_initrd_mem() - entry: Remove unneeded need_resched() loop" * tag 'csky-for-linus-5.4-rc1' of git://github.com/c-sky/csky-linux: csky: Move static keyword to the front of declaration csky: entry: Remove unneeded need_resched() loop csky: Fixup csky_pmu.max_period assignment csky: Fixup add zero_fp fixup perf backtrace panic csky: Use generic free_initrd_mem() csky: Fixup 610 vipt cache flush mechanism csky: Support kernel non-aligned access csky: Fixup defer cache flush for 610 csky: Fixup arch_get_unmapped_area() implementation csky: Fixup ioremap function losing csky: Optimize arch_sync_dma_for_cpu/device with dma_inv_range csky/dma: Fixup cache_op failed when cross memory ZONEs csky: Fixup dma_alloc_coherent with PAGE_SO attribute csky: Fixup mb() synchronization problem
2019-09-30Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "A few fixes that have trickled in through the merge window: - Video fixes for OMAP due to panel-dpi driver removal - Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7 - Fixing arch version on ASpeed ast2500 - Two fixes for reset handling on ARM SCMI" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: aspeed: ast2500 is ARMv6K reset: reset-scmi: add missing handle initialisation firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle() ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux ARM: dts: am3517-evm: Fix missing video ARM: dts: logicpd-torpedo-baseboard: Fix missing video ARM: omap2plus_defconfig: Fix missing video bus: ti-sysc: Fix handling of invalid clocks bus: ti-sysc: Fix clock handling for no-idle quirks
2019-09-30kvm: x86, powerpc: do not allow clearing largepages debugfs entryPaolo Bonzini
The largepages debugfs entry is incremented/decremented as shadow pages are created or destroyed. Clearing it will result in an underflow, which is harmless to KVM but ugly (and could be misinterpreted by tools that use debugfs information), so make this particular statistic read-only. Cc: kvm-ppc@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-30ARM: dts: am4372: Set memory bandwidth limit for DISPCPeter Ujfalusi
Set memory bandwidth limit to filter out resolutions above 720p@60Hz to avoid underflow errors due to the bandwidth needs of higher resolutions. am43xx can not provide enough bandwidth to DISPC to correctly handle 'high' resolutions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-09-30csky: Move static keyword to the front of declarationKrzysztof Wilczynski
Move the static keyword to the front of declaration of csky_pmu_of_device_ids, and resolve the following compiler warning that can be seen when building with warnings enabled (W=1): arch/csky/kernel/perf_event.c:1340:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Guo Ren <guoren@kernel.org>
2019-09-30csky: entry: Remove unneeded need_resched() loopValentin Schneider
Since the enabling and disabling of IRQs within preempt_schedule_irq() is contained in a need_resched() loop, we don't need the outer arch code loop. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Guo Ren <guoren@kernel.org>
2019-09-30csky: Fixup csky_pmu.max_period assignmentMao Han
The csky_pmu.max_period has type u64, and BIT() can only return 32 bits unsigned long on C-SKY. The initialization for max_period will be incorrect when count_width is bigger than 32. Use BIT_ULL() Signed-off-by: Mao Han <han_mao@c-sky.com> Signed-off-by: Guo Ren <ren_guo@c-sky.com>
2019-09-30csky: Fixup add zero_fp fixup perf backtrace panicGuo Ren
We need set fp zero to let backtrace know the end. The patch fixup perf callchain panic problem, because backtrace didn't know what is the end of fp. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Reported-by: Mao Han <han_mao@c-sky.com>
2019-09-30csky: Use generic free_initrd_mem()Mike Rapoport
The csky implementation of free_initrd_mem() is an open-coded version of free_reserved_area() without poisoning. Remove it and make csky use the generic version of free_initrd_mem(). Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Guo Ren <guoren@kernel.org>
2019-09-29Merge tag 'fixes-5.4-merge-window' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omap variants Few fixes for ti-sysc interconnect target module driver for no-idle quirks that caused nfsroot to fail on some dra7 boards. And let's fixes to get LCD working again for logicpd board that got broken a while back with removal of panel-dpi driver. We need to now use generic CONFIG_DRM_PANEL_SIMPLE instead. * tag 'fixes-5.4-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle() ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux ARM: dts: am3517-evm: Fix missing video ARM: dts: logicpd-torpedo-baseboard: Fix missing video ARM: omap2plus_defconfig: Fix missing video bus: ti-sysc: Fix handling of invalid clocks bus: ti-sysc: Fix clock handling for no-idle quirks Link: https://lore.kernel.org/r/pull-1568819401-72461@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-09-29Merge tag 'libnvdimm-fixes-5.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm More libnvdimm updates from Dan Williams: - Complete the reworks to interoperate with powerpc dynamic huge page sizes - Fix a crash due to missed accounting for the powerpc 'struct page'-memmap mapping granularity - Fix badblock initialization for volatile (DRAM emulated) pmem ranges - Stop triggering request_key() notifications to userspace when NVDIMM-security is disabled / not present - Miscellaneous small fixups * tag 'libnvdimm-fixes-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm/region: Enable MAP_SYNC for volatile regions libnvdimm: prevent nvdimm from requesting key when security is disabled libnvdimm/region: Initialize bad block for volatile namespaces libnvdimm/nfit_test: Fix acpi_handle redefinition libnvdimm/altmap: Track namespace boundaries in altmap libnvdimm: Fix endian conversion issues  libnvdimm/dax: Pick the right alignment default when creating dax devices powerpc/book3s64: Export has_transparent_hugepage() related functions.
generated by cgit (git 2.34.1) at 2025-09-30 19:21:30 +0000