summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2015-09-04mm: send one IPI per CPU to TLB flush all entries after unmapping pagesMel Gorman
An IPI is sent to flush remote TLBs when a page is unmapped that was potentially accesssed by other CPUs. There are many circumstances where this happens but the obvious one is kswapd reclaiming pages belonging to a running process as kswapd and the task are likely running on separate CPUs. On small machines, this is not a significant problem but as machine gets larger with more cores and more memory, the cost of these IPIs can be high. This patch uses a simple structure that tracks CPUs that potentially have TLB entries for pages being unmapped. When the unmapping is complete, the full TLB is flushed on the assumption that a refill cost is lower than flushing individual entries. Architectures wishing to do this must give the following guarantee. If a clean page is unmapped and not immediately flushed, the architecture must guarantee that a write to that linear address from a CPU with a cached TLB entry will trap a page fault. This is essentially what the kernel already depends on but the window is much larger with this patch applied and is worth highlighting. The architecture should consider whether the cost of the full TLB flush is higher than sending an IPI to flush each individual entry. An additional architecture helper called flush_tlb_local is required. It's a trivial wrapper with some accounting in the x86 case. The impact of this patch depends on the workload as measuring any benefit requires both mapped pages co-located on the LRU and memory pressure. The case with the biggest impact is multiple processes reading mapped pages taken from the vm-scalability test suite. The test case uses NR_CPU readers of mapped files that consume 10*RAM. Linear mapped reader on a 4-node machine with 64G RAM and 48 CPUs 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 159.62 ( 0.00%) 120.68 ( 24.40%) Ops lru-file-mmap-read-time_range 30.59 ( 0.00%) 2.80 ( 90.85%) Ops lru-file-mmap-read-time_stddv 6.70 ( 0.00%) 0.64 ( 90.38%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 581.00 611.43 System 5804.93 4111.76 Elapsed 161.03 122.12 This is showing that the readers completed 24.40% faster with 29% less system CPU time. From vmstats, it is known that the vanilla kernel was interrupted roughly 900K times per second during the steady phase of the test and the patched kernel was interrupts 180K times per second. The impact is lower on a single socket machine. 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 25.33 ( 0.00%) 20.38 ( 19.54%) Ops lru-file-mmap-read-time_range 0.91 ( 0.00%) 1.44 (-58.24%) Ops lru-file-mmap-read-time_stddv 0.28 ( 0.00%) 0.47 (-65.34%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 58.09 57.64 System 111.82 76.56 Elapsed 27.29 22.55 It's still a noticeable improvement with vmstat showing interrupts went from roughly 500K per second to 45K per second. The patch will have no impact on workloads with no memory pressure or have relatively few mapped pages. It will have an unpredictable impact on the workload running on the CPU being flushed as it'll depend on how many TLB entries need to be refilled and how long that takes. Worst case, the TLB will be completely cleared of active entries when the target PFNs were not resident at all. [sasha.levin@oracle.com: trace tlb flush after disabling preemption in try_to_unmap_flush] Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04x86, mm: trace when an IPI is about to be sentMel Gorman
When unmapping pages it is necessary to flush the TLB. If that page was accessed by another CPU then an IPI is used to flush the remote CPU. That is a lot of IPIs if kswapd is scanning and unmapping >100K pages per second. There already is a window between when a page is unmapped and when it is TLB flushed. This series increases the window so multiple pages can be flushed using a single IPI. This should be safe or the kernel is hosed already. Patch 1 simply made the rest of the series easier to write as ftrace could identify all the senders of TLB flush IPIS. Patch 2 tracks what CPUs potentially map a PFN and then sends an IPI to flush the entire TLB. Patch 3 tracks when there potentially are writable TLB entries that need to be batched differently Patch 4 increases SWAP_CLUSTER_MAX to further batch flushes The performance impact is documented in the changelogs but in the optimistic case on a 4-socket machine the full series reduces interrupts from 900K interrupts/second to 60K interrupts/second. This patch (of 4): It is easy to trace when an IPI is received to flush a TLB but harder to detect what event sent it. This patch makes it easy to identify the source of IPIs being transmitted for TLB flushes on x86. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04userfaultfd: activate syscallAndrea Arcangeli
This activates the userfaultfd syscall. [sfr@canb.auug.org.au: activate syscall fix] [akpm@linux-foundation.org: don't enable userfaultfd on powerpc] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04watchdog: rename watchdog_suspend() and watchdog_resume()Ulrich Obergfell
Rename watchdog_suspend() to lockup_detector_suspend() and watchdog_resume() to lockup_detector_resume() to avoid confusion with the watchdog subsystem and to be consistent with the existing name lockup_detector_init(). Also provide comment blocks to explain the watchdog_running and watchdog_suspended variables and their relationship. Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Don Zickus <dzickus@redhat.com> Cc: Ulrich Obergfell <uobergfe@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Stephane Eranian <eranian@google.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04watchdog: use suspend/resume interface in fixup_ht_bug()Ulrich Obergfell
Remove watchdog_nmi_disable_all() and watchdog_nmi_enable_all() since these functions are no longer needed. If a subsystem has a need to deactivate the watchdog temporarily, it should utilize the watchdog_suspend() and watchdog_resume() functions. [akpm@linux-foundation.org: fix build with CONFIG_LOCKUP_DETECTOR=m] Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Don Zickus <dzickus@redhat.com> Cc: Ulrich Obergfell <uobergfe@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Stephane Eranian <eranian@google.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04kernel/watchdog: move NMI function header declarations from watchdog.h to nmi.hGuenter Roeck
The kernel's NMI watchdog has nothing to do with the watchdog subsystem. Its header declarations should be in linux/nmi.h, not linux/watchdog.h. The code provided two sets of dummy functions if HARDLOCKUP_DETECTOR is not configured, one in the include file and one in kernel/watchdog.c. Remove the dummy functions from kernel/watchdog.c and use those from the include file. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: Stephane Eranian <eranian@google.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Don Zickus <dzickus@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04sh: use PFN_DOWN macroAlexander Kuleshov
Replace ((x) >> PAGE_SHIFT) with the predefined PFN_DOWN macro. Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05CRISv10: delete unused lib/dmacopy.cRabin Vincent
This file is never built. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jespern@axis.com>
2015-09-05CRISv10: delete unused lib/old_checksum.cRabin Vincent
This file is never built. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05CRIS: fix switch_mm() lockdep splatRabin Vincent
With lockdep support implemented on CRISv32, we get the following splat. switch_mm() can be called both from the scheduler() (with interrupts disabled) and from flush_old_exec (via activate_mm()), with interrupts enabled. Fix it by disabling interrupts in activate_mm(), similar to powerpc and hexagon. t====================================================== [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ] 3.19.0-08802-g20bc9f1-dirty #323 Not tainted ------------------------------------------------------ init/1 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: (mmu_context_lock){+.+...}, at: [<c0009290>] switch_mm+0x22/0xc6 and this task is already holding: (&rq->lock){-.-.-.}, at: [<c01a0756>] __schedule+0x5e/0x648 which would create a new lock dependency: (&rq->lock){-.-.-.} -> (mmu_context_lock){+.+...} but this new dependency connects a HARDIRQ-irq-safe lock: (&rq->lock){-.-.-.} ... which became HARDIRQ-irq-safe at: [<c002b03c>] scheduler_tick+0x28/0x5e [<c0007c6c>] timer_interrupt+0x4e/0x6a [<c0043ac4>] handle_irq_event_percpu+0x54/0x13c [<c004343c>] generic_handle_irq+0x2a/0x36 to a HARDIRQ-irq-unsafe lock: (mmu_context_lock){+.+...} ... which became HARDIRQ-irq-unsafe at: ... [<c0039e60>] __lock_acquire+0x8f8/0x1d9c [<c0009290>] switch_mm+0x22/0xc6 [<c009c260>] flush_old_exec+0x500/0x5d4 [<c00da4c6>] load_elf_phdrs+0x7a/0x84 [<c00dbdb0>] load_elf_binary+0x21c/0x13b4 [<c009cdb6>] do_execve+0x22/0x2c [<c001dcf2>] ____call_usermodehelper+0x0/0x154 [<c000581e>] ret_from_kernel_thread+0xe/0x14 other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(mmu_context_lock); local_irq_disable(); lock(&rq->lock); lock(mmu_context_lock); <Interrupt> lock(&rq->lock); *** DEADLOCK *** 1 lock held by init/1: #0: (&rq->lock){-.-.-.}, at: [<c01a0756>] __schedule+0x5e/0x648 Call Trace: [<c019fe9e>] printk+0x0/0x4e [<c00368f8>] print_shortest_lock_dependencies+0x0/0x15c [<c0048628>] print_stack_trace+0x0/0x88 [<c0038912>] __lock_is_held+0x3e/0x5e [<c003b894>] lock_acquire+0x8a/0xcc [<c01a50c4>] _raw_spin_lock+0x44/0x7a [<c0009290>] switch_mm+0x22/0xc6 [<c01a06f8>] __schedule+0x0/0x648 [<c01a0d76>] schedule+0x36/0x7c [<c0037d04>] trace_hardirqs_on+0x0/0x1e [<c0004e18>] do_work_pending+0x30/0xd4 [<c000591a>] _work_pending+0xe/0x12 Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05CRISv32: enable LOCKDEP_SUPPORTRabin Vincent
Now that we have stack tracing and irq flags tracing support, we can also enable lockdep support Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05CRIS: add STACKTRACE_SUPPORTRabin Vincent
Add stacktrace support, which is required for lockdep and tracing. The stack tracing simply looks at all kernel text symbols found on the stack, similar to the trap stack dumping code, which can also be converted to use this. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05CRISv32: annotate irq enable in idle loopRabin Vincent
Use a call to local_irq_enable() instead of incline asm so that the irqsoff latency tracer knows that interrupts are enabled here. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05CRISv32: add support for irqflags tracingRabin Vincent
Add support irqflags tracing, which is required for things like lockdep and ftrace. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05CRIS: UAPI: use generic types.hRabin Vincent
CRIS' types.h is functionally identical to the asm-generic version. Effective diff: +#ifndef _ASM_GENERIC_TYPES_H +#define _ASM_GENERIC_TYPES_H + #include <asm-generic/int-ll64.h> + +#endif Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05CRIS: UAPI: use generic shmbuf.hRabin Vincent
CRIS' shmbuf.h is equivalent to the asm-generic verison. Effective diff: -#ifndef _CRIS_SHMBUF_H -#define _CRIS_SHMBUF_H +#ifndef __ASM_GENERIC_SHMBUF_H +#define __ASM_GENERIC_SHMBUF_H + +#include <asm/bitsperlong.h> struct ipc64_perm shm_perm; size_t shm_segsz; __kernel_time_t shm_atime; +#if __BITS_PER_LONG != 64 unsigned long __unused1; +#endif __kernel_time_t shm_dtime; +#if __BITS_PER_LONG != 64 unsigned long __unused2; +#endif __kernel_time_t shm_ctime; +#if __BITS_PER_LONG != 64 unsigned long __unused3; +#endif __kernel_pid_t shm_cpid; __kernel_pid_t shm_lpid; - unsigned long shm_nattch; - unsigned long __unused4; - unsigned long __unused5; + __kernel_ulong_t shm_nattch; + __kernel_ulong_t __unused4; + __kernel_ulong_t __unused5; }; struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; + __kernel_ulong_t shmmax; + __kernel_ulong_t shmmin; + __kernel_ulong_t shmmni; + __kernel_ulong_t shmseg; + __kernel_ulong_t shmall; + __kernel_ulong_t __unused1; + __kernel_ulong_t __unused2; + __kernel_ulong_t __unused3; + __kernel_ulong_t __unused4; }; #endif Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05CRIS: UAPI: use generic msgbuf.hRabin Vincent
CRIS' msgbuf.h is equivalent to the asm-generic version. Effective diff: -#ifndef _CRIS_MSGBUF_H -#define _CRIS_MSGBUF_H - - +#ifndef __ASM_GENERIC_MSGBUF_H +#define __ASM_GENERIC_MSGBUF_H +#include <asm/bitsperlong.h> struct msqid64_ds { struct ipc64_perm msg_perm; __kernel_time_t msg_stime; +#if __BITS_PER_LONG != 64 unsigned long __unused1; +#endif __kernel_time_t msg_rtime; +#if __BITS_PER_LONG != 64 unsigned long __unused2; +#endif __kernel_time_t msg_ctime; +#if __BITS_PER_LONG != 64 unsigned long __unused3; - unsigned long msg_cbytes; - unsigned long msg_qnum; - unsigned long msg_qbytes; +#endif + __kernel_ulong_t msg_cbytes; + __kernel_ulong_t msg_qnum; + __kernel_ulong_t msg_qbytes; __kernel_pid_t msg_lspid; __kernel_pid_t msg_lrpid; - unsigned long __unused4; - unsigned long __unused5; + __kernel_ulong_t __unused4; + __kernel_ulong_t __unused5; }; #endif Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05CRIS: UAPI: use generic socket.hRabin Vincent
CRIS' socket.h is equivalent to the asm-generic version. Effective diff: -#ifndef _ASM_SOCKET_H -#define _ASM_SOCKET_H - - +#ifndef __ASM_GENERIC_SOCKET_H +#define __ASM_GENERIC_SOCKET_H #include <asm/sockios.h> #define SO_LINGER 13 #define SO_BSDCOMPAT 14 #define SO_REUSEPORT 15 +#ifndef SO_PASSCRED #define SO_PASSCRED 16 #define SO_PEERCRED 17 #define SO_RCVLOWAT 18 #define SO_SNDLOWAT 19 #define SO_RCVTIMEO 20 #define SO_SNDTIMEO 21 +#endif #define SO_SECURITY_AUTHENTICATION 22 Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05CRIS: UAPI: use generic sembuf.hRabin Vincent
CRIS's sembuf.h is equivalent to the asm-generic version. Effective diff: -#ifndef _CRIS_SEMBUF_H -#define _CRIS_SEMBUF_H +#ifndef __ASM_GENERIC_SEMBUF_H +#define __ASM_GENERIC_SEMBUF_H +#include <asm/bitsperlong.h> struct semid64_ds { struct ipc64_perm sem_perm; __kernel_time_t sem_otime; +#if __BITS_PER_LONG != 64 unsigned long __unused1; +#endif __kernel_time_t sem_ctime; +#if __BITS_PER_LONG != 64 unsigned long __unused2; +#endif unsigned long sem_nsems; unsigned long __unused3; unsigned long __unused4; Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05CRIS: UAPI: use generic sockios.hRabin Vincent
CRIS' sockios.h is equivalent to the asm-generic version. Effective diff: -#ifndef __ARCH_CRIS_SOCKIOS__ -#define __ARCH_CRIS_SOCKIOS__ +#ifndef __ASM_GENERIC_SOCKIOS_H +#define __ASM_GENERIC_SOCKIOS_H Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05CRIS: UAPI: use generic auxvec.hRabin Vincent
CRIS's auxvec.h is empty just like the asm-generic version. Effective diff: -#ifndef __ASMCRIS_AUXVEC_H -#define __ASMCRIS_AUXVEC_H +#ifndef __ASM_GENERIC_AUXVEC_H +#define __ASM_GENERIC_AUXVEC_H + Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05CRIS: UAPI: use generic headers via KbuildRabin Vincent
Use Kbuild magic to include the generic headers. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-04Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main pull request for the drm for 4.3. Nouveau is probably the biggest amount of changes in here, since it missed 4.2. Highlights below, along with the usual bunch of fixes. All stuff outside drm should have applicable acks. Highlights: - new drivers: freescale dcu kms driver - core: more atomic fixes disable some dri1 interfaces on kms drivers drop fb panic handling, this was just getting more broken, as more locking was required. new core fbdev Kconfig support - instead of each driver enable/disabling it struct_mutex cleanups - panel: more new panels cleanup Kconfig - i915: Skylake support enabled by default legacy modesetting using atomic infrastructure Skylake fixes GEN9 workarounds - amdgpu: Fiji support CGS support for amdgpu Initial GPU scheduler - off by default Lots of bug fixes and optimisations. - radeon: DP fixes misc fixes - amdkfd: Add Carrizo support for amdkfd using amdgpu. - nouveau: long pending cleanup to complete driver, fully bisectable which makes it larger, perfmon work more reclocking improvements maxwell displayport fixes - vmwgfx: new DX device support, supports OpenGL 3.3 screen targets support - mgag200: G200eW support G200e new revision support - msm: dragonboard 410c support, msm8x94 support, msm8x74v1 support yuv format support dma plane support mdp5 rotation initial hdcp - sti: atomic support - exynos: lots of cleanups atomic modesetting/pageflipping support render node support - tegra: tegra210 support (dc, dsi, dp/hdmi) dpms with atomic modesetting support - atmel: support for 3 more atmel SoCs new input formats, PRIME support. - dwhdmi: preparing to add audio support - rockchip: yuv plane support" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1369 commits) drm/amdgpu: rename gmc_v8_0_init_compute_vmid drm/amdgpu: fix vce3 instance handling drm/amdgpu: remove ib test for the second VCE Ring drm/amdgpu: properly enable VM fault interrupts drm/amdgpu: fix warning in scheduler drm/amdgpu: fix buffer placement under memory pressure drm/amdgpu/cz: fix cz_dpm_update_low_memory_pstate logic drm/amdgpu: fix typo in dce11 watermark setup drm/amdgpu: fix typo in dce10 watermark setup drm/amdgpu: use top down allocation for non-CPU accessible vram drm/amdgpu: be explicit about cpu vram access for driver BOs (v2) drm/amdgpu: set MEC doorbell range for Fiji drm/amdgpu: implement burst NOP for SDMA drm/amdgpu: add insert_nop ring func and default implementation drm/amdgpu: add amdgpu_get_sdma_instance helper function drm/amdgpu: add AMDGPU_MAX_SDMA_INSTANCES drm/amdgpu: add burst_nop flag for sdma drm/amdgpu: add count field for the SDMA NOP packet v2 drm/amdgpu: use PT for VM sync on unmap drm/amdgpu: make wait_event uninterruptible in push_job ...
2015-09-05CRIS: UAPI: fix elf.h exportRabin Vincent
CRIS userspace (uClibc for one) expects asm/elf.h to be exported but this header appears to have gone missing at some point. Move it to uapi/ and export it. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05CRIS: don't make asm/elf.h depend on asm/user.hRabin Vincent
We're going to export asm/elf.h; remove its dependencies on the non-exported asm/user.h and the unused asm/system.h include. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05CRIS: UAPI: fix ptrace.hRabin Vincent
The exported ptrace.h header on CRIS references an "arch" directory which does not exist. Fix this by having the variants in the same directory and including them conditionally, similar to other architectures. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05CRISv32: Squash compile warnings for axisflashmapJesper Nilsson
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05CRISv32: Add GPIO driver to the default configsJesper Nilsson
Fix a number of small issues visible when GPIO is enabled: - Correct missing default for !ETRAXFS in Kconfig - Remove information on number of bits for some Kconfigs related to the GPIO, they are different in ETRAX FS and ARTPEC-3 - Fix compile warning in ARTPEC-3 GPIO driver Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05CRISv32: ETRAX FS: Squash warnings in pinmux driverJesper Nilsson
Squash the followng warnings arch/cris/arch-v32/mach-fs/pinmux.c: In function 'crisv32_pinmux_alloc_fixed': arch/cris/arch-v32/mach-fs/pinmux.c:104:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] arch/cris/arch-v32/mach-fs/pinmux.c: In function 'crisv32_pinmux_dealloc_fixed': arch/cris/arch-v32/mach-fs/pinmux.c:238:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] arch/cris/arch-v32/mach-fs/pinmux.c: In function '__crisv32_pinmux_alloc': arch/cris/arch-v32/mach-fs/pinmux.c:49:1: warning: control reaches end of non-void function [-Wreturn-type] Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2015-09-05CRIS: Wire up missing syscallsChen Gang
The related warnings: CALL scripts/checksyscalls.sh <stdin>:1229:2: warning: #warning syscall sched_setattr not implemented [-Wcpp] <stdin>:1232:2: warning: #warning syscall sched_getattr not implemented [-Wcpp] <stdin>:1235:2: warning: #warning syscall renameat2 not implemented [-Wcpp] <stdin>:1238:2: warning: #warning syscall seccomp not implemented [-Wcpp] <stdin>:1241:2: warning: #warning syscall getrandom not implemented [-Wcpp] <stdin>:1244:2: warning: #warning syscall memfd_create not implemented [-Wcpp] <stdin>:1247:2: warning: #warning syscall bpf not implemented [-Wcpp] <stdin>:1250:2: warning: #warning syscall execveat not implemented [-Wcpp] Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Jesper Nilsson <jespern@axis.com>
2015-09-05CRISv32: allow CONFIG_DEBUG_BUGVERBOSERabin Vincent
Support for verbose BUG reporting already exists, but the HAVE flag that allows the option to be enabled is missing. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jespern@axis.com>
2015-09-05CRISv32: add unreachable() to BUG()Rabin Vincent
Add an unreachable() in the BUG() implementations, to get rid of several warnings similar to the one below: kernel/sched/core.c: In function 'pick_next_task': kernel/sched/core.c:2690:1: warning: control reaches end of non-void function [-Wreturn-type] Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jespern@axis.com>
2015-09-05cris: arch-v32: gpio: Use kzalloc instead of kmalloc/memsetChristophe Jaillet
Turn a kmalloc/memset into an equivalent kzalloc. Doing so also move the zero'ing of the memory outside of a mutex. Signed-off-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr> Signed-off-by: Jesper Nilsson <jespern@axis.com>
2015-09-04Merge tag 'pinctrl-v4.3-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.3 development cycle. Like with GPIO it's a lot of stuff. If my subsystems are any sign of the overall tempo of the kernel v4.3 will be a gigantic diff. [ It looks like 4.3 is calmer than 4.2 in most other subsystems, but we'll see - Linus ] Core changes: - It is possible configure groups in debugfs. - Consolidation of chained IRQ handler install/remove replacing all call sites where irq_set_handler_data() and irq_set_chained_handler() were done in succession with a combined call to irq_set_chained_handler_and_data(). This series was created by Thomas Gleixner after the problem was observed by Russell King. - Tglx also made another series of patches switching __irq_set_handler_locked() for irq_set_handler_locked() which is way cleaner. - Tglx also wrote a good bunch of patches to make use of irq_desc_get_xxx() accessors and avoid looking up irq_descs from IRQ numbers. The goal is to get rid of the irq number from the handlers in the IRQ flow which is nice. Driver feature enhancements: - Power management support for the SiRF SoC Atlas 7. - Power down support for the Qualcomm driver. - Intel Cherryview and Baytrail: switch drivers to use raw spinlocks in IRQ handlers to play nice with the realtime patch set. - Rework and new modes handling for Qualcomm SPMI-MPP. - Pinconf power source config for SH PFC. New drivers and subdrivers: - A new driver for Conexant Digicolor CX92755. - A new driver for UniPhier PH1-LD4, PH1-Pro4, PH1-sLD8, PH1-Pro5, ProXtream2 and PH1-LD6b SoC pin control support. - Reverse-egineered the S/PDIF settings for the Allwinner sun4i driver. - Support for Qualcomm Technologies QDF2xxx ARM64 SoCs - A new Freescale i.mx6ul subdriver. Cleanup: - Remove platform data support in a number of SH PFC subdrivers" * tag 'pinctrl-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (95 commits) pinctrl: at91: fix null pointer dereference pinctrl: mediatek: Implement wake handler and suspend resume pinctrl: mediatek: Fix multiple registration issue. pinctrl: sh-pfc: r8a7794: add USB pin groups pinctrl: at91: Use generic irq_{request,release}_resources() pinctrl: cherryview: Use raw_spinlock for locking pinctrl: baytrail: Use raw_spinlock for locking pinctrl: imx6ul: Remove .owner field pinctrl: zynq: Fix typos in smc0_nand_grp and smc0_nor_grp pinctrl: sh-pfc: Implement pinconf power-source param for voltage switching clk: rockchip: add pclk_pd_pmu to the list of rk3288 critical clocks pinctrl: sun4i: add spdif to pin description. pinctrl: atlas7: clear ugly branch statements for pull and drivestrength pinctrl: baytrail: Serialize all register access pinctrl: baytrail: Drop FSF mailing address pinctrl: rockchip: only enable gpio clock when it setting pinctrl/mediatek: fix spelling mistake in dev_err error message pinctrl: cherryview: Serialize all register access pinctrl: UniPhier: PH1-Pro5: add I2C ch6 pin-mux setting pinctrl: nomadik: reflect current input value ...
2015-09-04arm/arm64: KVM: Fix PSCI affinity info return value for non valid coresAlexander Spyridakis
If a guest requests the affinity info for a non-existing vCPU we need to properly return an error, instead of erroneously reporting an off state. Signed-off-by: Alexander Spyridakis <a.spyridakis@virtualopensystems.com> Signed-off-by: Alvise Rigo <a.rigo@virtualopensystems.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds
Pull tile updates from Chris Metcalf: "This includes secure computing support as well as miscellaneous minor improvements" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: correct some typos in opcode type names tile/vdso: emit a GNU hash as well tile: Remove finish_arch_switch tile: enable full SECCOMP support tile/time: Migrate to new 'set-state' interface
2015-09-04arm64: KVM: set {v,}TCR_EL2 RES1 bitsMark Rutland
Currently we don't set the RES1 bits of TCR_EL2 and VTCR_EL2 when configuring them, which could lead to unexpected behaviour when an architectural meaning is defined for those bits. Set the RES1 bits to avoid issues. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Suzuki Poulose <suzuki.poulose@arm.com> Cc: Will Deacon <will.deacon@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-04crypto: ghash-clmulni: specify context size for ghash async algorithmAndrey Ryabinin
Currently context size (cra_ctxsize) doesn't specified for ghash_async_alg. Which means it's zero. Thus crypto_create_tfm() doesn't allocate needed space for ghash_async_ctx, so any read/write to ctx (e.g. in ghash_async_init_tfm()) is not valid. Cc: stable@vger.kernel.org Signed-off-by: Andrey Ryabinin <aryabinin@odin.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-09-04Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: - Support for new architectural features introduced in ARMv8.1: * Privileged Access Never (PAN) to catch user pointer dereferences in the kernel * Large System Extension (LSE) for building scalable atomics and locks (depends on locking/arch-atomic from tip, which is included here) * Hardware Dirty Bit Management (DBM) for updating clean PTEs automatically - Move our PSCI implementation out into drivers/firmware/, where it can be shared with arch/arm/. RMK has also pulled this component branch and has additional patches moving arch/arm/ over. MAINTAINERS is updated accordingly. - Better BUG implementation based on the BRK instruction for trapping - Leaf TLB invalidation for unmapping user pages - Support for PROBE_ONLY PCI configurations - Various cleanups and non-critical fixes, including: * Always flush FP/SIMD state over exec() * Restrict memblock additions based on range of linear mapping * Ensure *(LIST_POISON) generates a fatal fault * Context-tracking syscall return no longer corrupts return value when not forced on. * Alternatives patching synchronisation/stability improvements * Signed sub-word cmpxchg compare fix (tickled by HAVE_CMPXCHG_LOCAL) * Force SMP=y * Hide direct DCC access from userspace * Fix EFI stub memory allocation when DRAM starts at 0x0 * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (92 commits) arm64: flush FP/SIMD state correctly after execve() arm64: makefile: fix perf_callchain.o kconfig dependency arm64: set MAX_MEMBLOCK_ADDR according to linear region size of/fdt: make memblock maximum physical address arch configurable arm64: Fix source code file path in comments arm64: entry: always restore x0 from the stack on syscall return arm64: mdscr_el1: avoid exposing DCC to userspace arm64: kconfig: Move LIST_POISON to a safe value arm64: Add __exception_irq_entry definition for function graph arm64: mm: ensure patched kernel text is fetched from PoU arm64: alternatives: ensure secondary CPUs execute ISB after patching arm64: make ll/sc __cmpxchg_case_##name asm consistent arm64: dma-mapping: Simplify pgprot handling arm64: restore cpu suspend/resume functionality ARM64: PCI: do not enable resources on PROBE_ONLY systems arm64: cmpxchg: truncate sub-word signed types before comparison arm64: alternative: put secondary CPUs into polling loop during patch arm64/Documentation: clarify wording regarding memory below the Image arm64: lse: fix lse cmpxchg code indentation arm64: remove redundant object file list ...
2015-09-04kbuild: Fix clang detectionMichal Marek
We cannot detect clang before including the arch Makefile, because that can set the default cross compiler. We also cannot detect clang after including the arch Makefile, because powerpc wants to know about clang. Solve this by using an deferred variable. This costs us a few shell invocations, but this is only a constant number. Reported-by: Behan Webster <behanw@converseincode.com> Reported-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michal Marek <mmarek@suse.com>
2015-09-03Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "This is the main pull request for 4.3 for MIPS. Here's the summary: Three fixes that didn't make 4.2-stable: - a -Os build might compile the kernel using the MIPS16 instruction set but the R2 optimized inline functions in <uapi/asm/swab.h> are implemented using 32-bit wide instructions which is invalid. - a build error in pgtable-bits.h for a particular kernel configuration. - accessing registers of the CM GCR might have been compiled to use 64 bit accesses but these registers are onl 32 bit wide. And also a few new bits: - move the ATH79 GPIO driver to drivers/gpio - the definition of IRQCHIP_DECLARE has moved to linux/irqchip.h, change ATH79 accordingly. - fix definition of pgprot_writecombine - add an implementation of dma_map_ops.mmap - fix alignment of quiet build output for vmlinuz link - BCM47xx: Use kmemdup rather than duplicating its implementation - Netlogic: Fix 0x0x prefixes of constants. - merge Bjorn Helgaas' series to remove most of the weak keywords from function declarations. - CP0 and CP1 registers are best considered treated as unsigned values to avoid large values from becoming negative values. - improve support for the MIPS GIC timer. - enable common clock framework for Malta and SEAD3. - a number of improvments and fixes to dump_tlb(). - document the MIPS TLB dump functionality in Magic SysRq. - Cavium Octeon CN68XX improvments. - NetLogic improvments. - irq: Use access helper irq_data_get_affinity_mask. - handle MSA unaligned accesses. - a number of R6-related math-emu fixes. - support for I6400. - improvments to MSA support. - add uprobes support. - move from deprecated __initcall to arch_initcall. - remove finish_arch_switch(). - IRQ cleanups by Thomas Gleixner. - migrate to new 'set-state' interface. - random small cleanups" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (148 commits) MIPS: UAPI: Fix unrecognized opcode WSBH/DSBH/DSHD when using MIPS16. MIPS: Fix alignment of quiet build output for vmlinuz link MIPS: math-emu: Remove unused handle_dsemul function declaration MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction MIPS: math-emu: Add support for the MIPS R6 CLASS FPU instruction MIPS: math-emu: Add support for the MIPS R6 RINT FPU instruction MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction MIPS: math-emu: Add support for the MIPS R6 SELNEZ FPU instruction MIPS: math-emu: Add support for the MIPS R6 SELEQZ FPU instruction MIPS: math-emu: Add support for the CMP.condn.fmt R6 instruction MIPS: inst.h: Add new MIPS R6 FPU opcodes MIPS: Octeon: Fix management port MII address on Kontron S1901 MIPS: BCM47xx: Use kmemdup rather than duplicating its implementation STAGING: Octeon: Use common helpers for determining interface and port MIPS: Octeon: Support interfaces 4 and 5 MIPS: Octeon: Set up 1:1 mapping between CN68XX PKO queues and ports MIPS: Octeon: Initialize CN68XX PKO STAGING: Octeon: Support CN68XX style WQE ...
2015-09-03Merge tag 'powerpc-4.3-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - support "hybrid" iommu/direct DMA ops for coherent_mask < dma_mask from Benjamin Herrenschmidt - EEH fixes for SRIOV from Gavin - introduce rtas_get_sensor_fast() for IRQ handlers from Thomas Huth - use hardware RNG for arch_get_random_seed_* not arch_get_random_* from Paul Mackerras - seccomp filter support from Michael Ellerman - opal_cec_reboot2() handling for HMIs & machine checks from Mahesh Salgaonkar - add powerpc timebase as a trace clock source from Naveen N. Rao - misc cleanups in the xmon, signal & SLB code from Anshuman Khandual - add an inline function to update POWER8 HID0 from Gautham R. Shenoy - fix pte_pagesize_index() crash on 4K w/64K hash from Michael Ellerman - drop support for 64K local store on 4K kernels from Michael Ellerman - move dma_get_required_mask() from pnv_phb to pci_controller_ops from Andrew Donnellan - initialize distance lookup table from drconf path from Nikunj A Dadhania - enable RTC class support from Vaibhav Jain - disable automatically blocked PCI config from Gavin Shan - add LEDs driver for PowerNV platform from Vasant Hegde - fix endianness issues in the HVSI driver from Laurent Dufour - kexec endian fixes from Samuel Mendoza-Jonas - fix corrupted pdn list from Gavin Shan - fix fenced PHB caused by eeh_slot_error_detail() from Gavin Shan - Freescale updates from Scott: Highlights include 32-bit memcpy/memset optimizations, checksum optimizations, 85xx config fragments and updates, device tree updates, e6500 fixes for non-SMP, and misc cleanup and minor fixes. - a ton of cxl updates & fixes: - add explicit precision specifiers from Rasmus Villemoes - use more common format specifier from Rasmus Villemoes - destroy cxl_adapter_idr on module_exit from Johannes Thumshirn - destroy afu->contexts_idr on release of an afu from Johannes Thumshirn - compile with -Werror from Daniel Axtens - EEH support from Daniel Axtens - plug irq_bitmap getting leaked in cxl_context from Vaibhav Jain - add alternate MMIO error handling from Ian Munsie - allow release of contexts which have been OPENED but not STARTED from Andrew Donnellan - remove use of macro DEFINE_PCI_DEVICE_TABLE from Vaishali Thakkar - release irqs if memory allocation fails from Vaibhav Jain - remove racy attempt to force EEH invocation in reset from Daniel Axtens - fix + cleanup error paths in cxl_dev_context_init from Ian Munsie - fix force unmapping mmaps of contexts allocated through the kernel api from Ian Munsie - set up and enable PSL Timebase from Philippe Bergheaud * tag 'powerpc-4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (140 commits) cxl: Set up and enable PSL Timebase cxl: Fix force unmapping mmaps of contexts allocated through the kernel api cxl: Fix + cleanup error paths in cxl_dev_context_init powerpc/eeh: Fix fenced PHB caused by eeh_slot_error_detail() powerpc/pseries: Cleanup on pci_dn_reconfig_notifier() powerpc/pseries: Fix corrupted pdn list powerpc/powernv: Enable LEDS support powerpc/iommu: Set default DMA offset in dma_dev_setup cxl: Remove racy attempt to force EEH invocation in reset cxl: Release irqs if memory allocation fails cxl: Remove use of macro DEFINE_PCI_DEVICE_TABLE powerpc/powernv: Fix mis-merge of OPAL support for LEDS driver powerpc/powernv: Reset HILE before kexec_sequence() powerpc/kexec: Reset secondary cpu endianness before kexec powerpc/hvsi: Fix endianness issues in the HVSI driver leds/powernv: Add driver for PowerNV platform powerpc/powernv: Create LED platform device powerpc/powernv: Add OPAL interfaces for accessing and modifying system LED states powerpc/powernv: Fix the log message when disabling VF cxl: Allow release of contexts which have been OPENED but not STARTED ...
2015-09-03Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM development updates from Russell King: "Included in this update: - moving PSCI code from ARM64/ARM to drivers/ - removal of some architecture internals from global kernel view - addition of software based "privileged no access" support using the old domains register to turn off the ability for kernel loads/stores to access userspace. Only the proper accessors will be usable. - addition of early fixup support for early console - re-addition (and reimplementation) of OMAP special interconnect barrier - removal of finish_arch_switch() - only expose cpuX/online in sysfs if hotpluggable - a number of code cleanups" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (41 commits) ARM: software-based priviledged-no-access support ARM: entry: provide uaccess assembly macro hooks ARM: entry: get rid of multiple macro definitions ARM: 8421/1: smp: Collapse arch_cpu_idle_dead() into cpu_die() ARM: uaccess: provide uaccess_save_and_enable() and uaccess_restore() ARM: mm: improve do_ldrd_abort macro ARM: entry: ensure that IRQs are enabled when calling syscall_trace_exit() ARM: entry: efficiency cleanups ARM: entry: get rid of asm_trace_hardirqs_on_cond ARM: uaccess: simplify user access assembly ARM: domains: remove DOMAIN_TABLE ARM: domains: keep vectors in separate domain ARM: domains: get rid of manager mode for user domain ARM: domains: move initial domain setting value to asm/domains.h ARM: domains: provide domain_mask() ARM: domains: switch to keeping domain value in register ARM: 8419/1: dma-mapping: harmonize definition of DMA_ERROR_CODE ARM: 8417/1: refactor bitops functions with BIT_MASK() and BIT_WORD() ARM: 8416/1: Feroceon: use of_iomap() to map register base ARM: 8415/1: early fixmap support for earlycon ...
2015-09-03Merge branch 'locking-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking and atomic updates from Ingo Molnar: "Main changes in this cycle are: - Extend atomic primitives with coherent logic op primitives (atomic_{or,and,xor}()) and deprecate the old partial APIs (atomic_{set,clear}_mask()) The old ops were incoherent with incompatible signatures across architectures and with incomplete support. Now every architecture supports the primitives consistently (by Peter Zijlstra) - Generic support for 'relaxed atomics': - _acquire/release/relaxed() flavours of xchg(), cmpxchg() and {add,sub}_return() - atomic_read_acquire() - atomic_set_release() This came out of porting qwrlock code to arm64 (by Will Deacon) - Clean up the fragile static_key APIs that were causing repeat bugs, by introducing a new one: DEFINE_STATIC_KEY_TRUE(name); DEFINE_STATIC_KEY_FALSE(name); which define a key of different types with an initial true/false value. Then allow: static_branch_likely() static_branch_unlikely() to take a key of either type and emit the right instruction for the case. To be able to know the 'type' of the static key we encode it in the jump entry (by Peter Zijlstra) - Static key self-tests (by Jason Baron) - qrwlock optimizations (by Waiman Long) - small futex enhancements (by Davidlohr Bueso) - ... and misc other changes" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits) jump_label/x86: Work around asm build bug on older/backported GCCs locking, ARM, atomics: Define our SMP atomics in terms of _relaxed() operations locking, include/llist: Use linux/atomic.h instead of asm/cmpxchg.h locking/qrwlock: Make use of _{acquire|release|relaxed}() atomics locking/qrwlock: Implement queue_write_unlock() using smp_store_release() locking/lockref: Remove homebrew cmpxchg64_relaxed() macro definition locking, asm-generic: Add _{relaxed|acquire|release}() variants for 'atomic_long_t' locking, asm-generic: Rework atomic-long.h to avoid bulk code duplication locking/atomics: Add _{acquire|release|relaxed}() variants of some atomic operations locking, compiler.h: Cast away attributes in the WRITE_ONCE() magic locking/static_keys: Make verify_keys() static jump label, locking/static_keys: Update docs locking/static_keys: Provide a selftest jump_label: Provide a self-test s390/uaccess, locking/static_keys: employ static_branch_likely() x86, tsc, locking/static_keys: Employ static_branch_likely() locking/static_keys: Add selftest locking/static_keys: Add a new static_key interface locking/static_keys: Rework update logic locking/static_keys: Add static_key_{en,dis}able() helpers ...
2015-09-04KVM: PPC: Book3S: Fix typo in top comment about lockingGreg Kurz
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2015-09-03x86/alternatives: Make optimize_nops() interrupt safe and syncedThomas Gleixner
Richard reported the following crash: [ 0.036000] BUG: unable to handle kernel paging request at 55501e06 [ 0.036000] IP: [<c0aae48b>] common_interrupt+0xb/0x38 [ 0.036000] Call Trace: [ 0.036000] [<c0409c80>] ? add_nops+0x90/0xa0 [ 0.036000] [<c040a054>] apply_alternatives+0x274/0x630 Chuck decoded: " 0: 8d 90 90 83 04 24 lea 0x24048390(%eax),%edx 6: 80 fc 0f cmp $0xf,%ah 9: a8 0f test $0xf,%al >> b: a0 06 1e 50 55 mov 0x55501e06,%al 10: 57 push %edi 11: 56 push %esi Interrupt 0x30 occurred while the alternatives code was replacing the initial 0x90,0x90,0x90 NOPs (from the ASM_CLAC macro) with the optimized version, 0x8d,0x76,0x00. Only the first byte has been replaced so far, and it makes a mess out of the insn decoding." optimize_nops() is buggy in two aspects: - It's not disabling interrupts across the modification - It's lacking a sync_core() call Add both. Fixes: 4fd4b6e5537c 'x86/alternatives: Use optimized NOPs for padding' Reported-and-tested-by: "Richard W.M. Jones" <rjones@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Richard W.M. Jones <rjones@redhat.com> Cc: Chuck Ebbert <cebbert.lkml@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1509031232340.15006@nanos Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Another merge window, another set of networking changes. I've heard rumblings that the lightweight tunnels infrastructure has been voted networking change of the year. But what do I know? 1) Add conntrack support to openvswitch, from Joe Stringer. 2) Initial support for VRF (Virtual Routing and Forwarding), which allows the segmentation of routing paths without using multiple devices. There are some semantic kinks to work out still, but this is a reasonably strong foundation. From David Ahern. 3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov. 4) Ignore route nexthops with a link down state in ipv6, just like ipv4. From Andy Gospodarek. 5) Remove spinlock from fast path of act_gact and act_mirred, from Eric Dumazet. 6) Document the DSA layer, from Florian Fainelli. 7) Add netconsole support to bcmgenet, systemport, and DSA. Also from Florian Fainelli. 8) Add Mellanox Switch Driver and core infrastructure, from Jiri Pirko. 9) Add support for "light weight tunnels", which allow for encapsulation and decapsulation without bearing the overhead of a full blown netdevice. From Thomas Graf, Jiri Benc, and a cast of others. 10) Add Identifier Locator Addressing support for ipv6, from Tom Herbert. 11) Support fragmented SKBs in iwlwifi, from Johannes Berg. 12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia. 13) Add BQL support to 3c59x driver, from Loganaden Velvindron. 14) Stop using a zero TX queue length to mean that a device shouldn't have a qdisc attached, use an explicit flag instead. From Phil Sutter. 15) Use generic geneve netdevice infrastructure in openvswitch, from Pravin B Shelar. 16) Add infrastructure to avoid re-forwarding a packet in software that was already forwarded by a hardware switch. From Scott Feldman. 17) Allow AF_PACKET fanout function to be implemented in a bpf program, from Willem de Bruijn" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits) netfilter: nf_conntrack: make nf_ct_zone_dflt built-in netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled net: fec: clear receive interrupts before processing a packet ipv6: fix exthdrs offload registration in out_rt path xen-netback: add support for multicast control bgmac: Update fixed_phy_register() sock, diag: fix panic in sock_diag_put_filterinfo flow_dissector: Use 'const' where possible. flow_dissector: Fix function argument ordering dependency ixgbe: Resolve "initialized field overwritten" warnings ixgbe: Remove bimodal SR-IOV disabling ixgbe: Add support for reporting 2.5G link speed ixgbe: fix bounds checking in ixgbe_setup_tc for 82598 ixgbe: support for ethtool set_rxfh ixgbe: Avoid needless PHY access on copper phys ixgbe: cleanup to use cached mask value ixgbe: Remove second instance of lan_id variable ixgbe: use kzalloc for allocating one thing flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c ixgbe: Remove unused PCI bus types ...
2015-09-03Merge branch 'devel-stable' into for-linusRussell King
Conflicts: drivers/perf/arm_pmu.c
2015-09-03Merge branches 'cleanup', 'fixes', 'misc', 'omap-barrier' and 'uaccess' into ↵Russell King
for-linus
2015-09-03Merge branch '4.2-fixes' into mips-for-linux-nextRalf Baechle