| Age | Commit message (Collapse) | Author |
|---|
|
Wherever possible, replace constructs that match either
generic_handle_irq(irq_find_mapping()) or
generic_handle_irq(irq_linear_revmap()) to a single call to
generic_handle_domain_irq().
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Wherever possible, replace constructs that match either
generic_handle_irq(irq_find_mapping()) or
generic_handle_irq(irq_linear_revmap()) to a single call to
generic_handle_domain_irq().
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
When this platform was relatively new in November 2011, with early BIOS
revisions, a reboot quirk was added in commit 6be30bb7d750 ("x86/reboot:
Blacklist Dell OptiPlex 990 known to require PCI reboot")
However, this quirk (and several others) are open-ended to all BIOS
versions and left no automatic expiry if/when the system BIOS fixed the
issue, meaning that nobody is likely to come along and re-test.
What is really problematic with using PCI reboot as this quirk does, is
that it causes this platform to do a full power down, wait one second,
and then power back on. This is less than ideal if one is using it for
boot testing and/or bisecting kernels when legacy rotating hard disks
are installed.
It was only by chance that the quirk was noticed in dmesg - and when
disabled it turned out that it wasn't required anymore (BIOS A24), and a
default reboot would work fine without the "harshness" of power cycling the
machine (and disks) down and up like the PCI reboot does.
Doing a bit more research, it seems that the "newest" BIOS for which the
issue was reported[1] was version A06, however Dell[2] seemed to suggest
only up to and including version A05, with the A06 having a large number of
fixes[3] listed.
As is typical with a new platform, the initial BIOS updates come frequently
and then taper off (and in this case, with a revival for CPU CVEs); a
search for O990-A<ver>.exe reveals the following dates:
A02 16 Mar 2011
A03 11 May 2011
A06 14 Sep 2011
A07 24 Oct 2011
A10 08 Dec 2011
A14 06 Sep 2012
A16 15 Oct 2012
A18 30 Sep 2013
A19 23 Sep 2015
A20 02 Jun 2017
A23 07 Mar 2018
A24 21 Aug 2018
While it's overkill to flash and test each of the above, it would seem
likely that the issue was contained within A0x BIOS versions, given the
dates above and the dates of issue reports[4] from distros. So rather than
just throw out the quirk entirely, limit the scope to just those early BIOS
versions, in case people are still running systems from 2011 with the
original as-shipped early A0x BIOS versions.
[1] https://lore.kernel.org/lkml/1320373471-3942-1-git-send-email-trenn@suse.de/
[2] https://www.dell.com/support/kbdoc/en-ca/000131908/linux-based-operating-systems-stall-upon-reboot-on-optiplex-390-790-990-systems
[3] https://www.dell.com/support/home/en-ca/drivers/driversdetails?driverid=85j10
[4] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/768039
Fixes: 6be30bb7d750 ("x86/reboot: Blacklist Dell OptiPlex 990 known to require PCI reboot")
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210530162447.996461-4-paul.gortmaker@windriver.com
|
|
Fixes the following kernel-doc warnings:
arch/x86/power/cpu.c:76: warning: Function parameter or
member 'ctxt' not described in '__save_processor_state'
arch/x86/power/cpu.c:192: warning: Function parameter or
member 'ctxt' not described in '__restore_processor_state'
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210618022421.1595596-1-libaokun1@huawei.com
|
|
The code that handles the early fdt mapping is hard to read and does not
create the same mapping size depending on the kernel:
- for 64-bit, 2 PMD entries are used which amounts to a 4MB mapping
- for 32-bit, 2 PGDIR entries are used which amounts to a 8MB mapping
So keep using 2 PMD entries for 64-bit and use only one PGD entry for
32-bit needed to cover 4MB. Move that into a new function called
create_fdt_early_page_table which, using the same naming as
create_kernel_page_table.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
__PAGETABLE_PMD_FOLDED defines a 2-level page table that is only used in
32-bit kernel, so there is no need to check for CONFIG_64BIT in #ifndef
__PAGETABLE_PMD_FOLDED and vice-versa.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
This allows to simplify the code and make it more readable.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
The kernel must always be mapped using PMD_SIZE, and this is already the
case, this just simplifies create_kernel_page_table.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
va_kernel_pa_offset was only used for 64-bit as the kernel mapping lies
in the linear mapping for 32-bit kernel and then only the offset between
the PAGE_OFFSET and the kernel load address is needed.
But this distinction complexifies the code with #ifdefs and especially
with a separate definition of the address conversions macros.
Simplify the code by defining this variable for both 32-bit and 64-bit.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
The current test in kernel_mapping_va_to_pa only applies when
CONFIG_XIP_KERNEL is set, so use IS_ENABLED to optimize this macro at
compile-time in standard kernels that do not require this test.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-By: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Fix the error code returned by __pkvm_host_share_hyp() when the
host attempts to share with EL2 a page that has already been shared with
another entity.
Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210811173630.2536721-1-qperret@google.com
|
|
Use obj-y to clean up Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Message-Id: <20210811163731.186125-4-masahiroy@kernel.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
All of arch/xtensa/platforms/*/ have Makefile. You do not need to
check the presence of Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Message-Id: <20210811163731.186125-3-masahiroy@kernel.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
None of arch/xtensa/variants/*/ has Makefile, so 'buildvar' is always
empty.
Perhaps, downstream variant code might be dropped in, but given the
fact that none of upstream variants builds anything in their variant
directory, I doubt this is needed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Message-Id: <20210811163731.186125-2-masahiroy@kernel.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
These are not used in any of subdirectories.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Message-Id: <20210811163731.186125-1-masahiroy@kernel.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Move strlen call inside the if block that checks string pointer for NULL.
While at it also fix the following coccicheck warning:
./arch/xtensa/platforms/iss/console.c:204:10-11: WARNING comparing
pointer to 0.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Track which IRQs have been served at each level to make sure that no IRQ
is served more than once while other IRQs at the same level are pending.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
XTENSA should only select HAVE_FUTEX_CMPXCHG when FUTEX is
set/enabled. This prevents a kconfig warning.
WARNING: unmet direct dependencies detected for HAVE_FUTEX_CMPXCHG
Depends on [n]: FUTEX [=n]
Selected by [y]:
- XTENSA [=y] && !MMU [=n]
Fixes: d951ba21b959 ("xtensa: nommu: select HAVE_FUTEX_CMPXCHG")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: linux-xtensa@linux-xtensa.org
Message-Id: <20210526070337.28130-1-rdunlap@infradead.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
resctrl_arch_get_config() has no return, but does pass a single value
back via one of its arguments.
Return the value instead.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210811163831.14917-1-james.morse@arm.com
|
|
resctrl uses struct rdt_resource to describe the available hardware
resources. The domains of the CDP aliases share a single ctrl_val[]
array. The only differences between the struct rdt_hw_resource aliases
is the name and conf_type.
The name from struct rdt_hw_resource is visible to user-space. To
support another architecture, as many user-visible details should be
handled in the filesystem parts of the code that is common to all
architectures. The name and conf_type go together.
Remove conf_type and the CDP aliases. When CDP is supported and enabled,
schemata_list_create() can create two schemata using the single
resource, generating the CODE/DATA suffix to the schema name itself.
This allows the alloc_ctrlval_array() and complications around free()ing
the ctrl_val arrays to be removed.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-25-james.morse@arm.com
|
|
resctrl_arch_update_domains() specifies the one closid that has been
modified and needs copying to the hardware.
resctrl_arch_update_domains() takes a struct rdt_resource and a closid
as arguments, but copies all the staged configurations for that closid
into the ctrl_val[] array.
resctrl_arch_update_domains() is called once per schema, but once the
resources and domains are merged, the second call of a L2CODE/L2DATA
pair will find no staged configurations, as they were previously
applied. The msr_param of the first call only has one index, so would
only have update the hardware for the last staged configuration.
To avoid a second round of IPIs when changing L2CODE and L2DATA in one
go, expand the range of the msr_param if multiple staged configurations
are found.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-24-james.morse@arm.com
|
|
When CDP is enabled, rdt_cdp_peer_get() finds the alternative
CODE/DATA resource and returns the alternative domain. This is used
to determine if bitmaps overlap when there are aliased entries
in the two struct rdt_hw_resources.
Now that the ctrl_val[] used by the CODE/DATA resources is the same,
the search for an alternate resource/domain is not needed.
Replace rdt_cdp_peer_get() with resctrl_peer_type(), which returns
the alternative type. This can be passed to resctrl_arch_get_config()
with the same resource and domain.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-23-james.morse@arm.com
|
|
Each struct rdt_hw_resource has its own ctrl_val[] array. When CDP is
enabled, two resources are in use, each with its own ctrl_val[] array
that holds half of the configuration used by hardware. One uses the odd
slots, the other the even. rdt_cdp_peer_get() is the helper to find the
alternate resource, its domain, and corresponding entry in the other
ctrl_val[] array.
Once the CDP resources are merged there will be one struct
rdt_hw_resource and one ctrl_val[] array for each hardware resource.
This will include changes to rdt_cdp_peer_get(), making it hard to
bisect any issue.
Merge the ctrl_val[] arrays for three CODE/DATA/NONE resources first.
Doing this before merging the resources temporarily complicates
allocating and freeing the ctrl_val arrays. Add a helper to allocate
the ctrl_val array, that returns the value on the L2 or L3 resource if
it already exists. This gets removed once the resources are merged, and
there really is only one ctrl_val[] array.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-22-james.morse@arm.com
|
|
resctrl uses cbm_idx() to map a closid to an index in the configuration
array. This is based on a multiplier and offset that are held in the
resource.
To merge the resources, the resctrl arch code needs to calculate the
index from something else, as there will only be one resource.
Decide based on the staged configuration type. This makes the static
mult and offset parameters redundant.
[ bp: Remove superfluous brackets in get_config_index() ]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-21-james.morse@arm.com
|
|
When resctrl comes to copy the CAT MSR values from the ctrl_val[] array
into hardware, it applies an offset adjustment based on the type of
the resource. CODE and DATA resources have their closid mapped into an
odd/even range. This mapping is based on a property of the resource.
This happens once the new control value has been written to the ctrl_val[]
array. Once the CDP resources are merged, there will only be a single
property that needs to cover both odd/even mappings to the single
ctrl_val[] array. The offset adjustment must be applied before the new
value is written to the array.
Move the logic from cat_wrmsr() to resctrl_arch_update_domains(). The
value provided to apply_config() is now an index in the array, not the
closid. The parameters provided via struct msr_param are now indexes
too. As resctrl's use of closid is a u32, struct msr_param's type is
changed to match.
With this, the CODE and DATA resources only use the odd or even
indexes in the array. This allows the temporary num_closid/2 fixes in
domain_setup_ctrlval() and reset_all_ctrls() to be removed.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-20-james.morse@arm.com
|
|
The CODE and DATA resources report a num_closid that is half the actual
size supported by the hardware. This behaviour is visible to user-space
when CDP is enabled.
The CODE and DATA resources have their own ctrlval arrays which are
half the size of the underlying hardware because num_closid was already
adjusted. One holds the odd configurations values, the other even.
Before the CDP resources can be merged, the 'half the closids' behaviour
needs to be implemented by schemata_list_create(), but this causes the
ctrl_val[] array to be full sized.
Remove the logic from the architecture specific rdt_get_cdp_config()
setup, and add it to schemata_list_create(). Functions that walk all the
configurations, such as domain_setup_ctrlval() and reset_all_ctrls(),
take num_closid directly from struct rdt_hw_resource also have
to halve num_closid as only the lower half of each array is in
use. domain_setup_ctrlval() and reset_all_ctrls() both copy struct
rdt_hw_resource's num_closid to a struct msr_param. Correct the value
here.
This is temporary as a subsequent patch will merge all three ctrl_val[]
arrays such that when CDP is in use, the CODA/DATA layout in the array
matches the hardware. reset_all_ctrls()'s loop over the whole of
ctrl_val[] is not touched as this is harmless, and will be required as
it is once the resources are merged.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-19-james.morse@arm.com
|
|
The ctrl_val[] array for a struct rdt_hw_resource only holds
configurations of one type. The type is implicit.
Once the CDP resources are merged, the ctrl_val[] array will hold all
the configurations for the hardware resource. When a particular type of
configuration is needed, it must be specified explicitly.
Pass the expected type from the schema into resctrl_arch_get_config().
Nothing uses this yet, but once a single ctrl_val[] array is used for
the three struct rdt_hw_resources that share hardware, the type will be
used to return the correct configuration value from the shared array.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-18-james.morse@arm.com
|
|
Functions like show_doms() reach into the architecture's private
structure to retrieve the configuration from the struct rdt_hw_resource.
The hardware configuration may look completely different to the
values resctrl gets from user-space. The staged configuration and
resctrl_arch_update_domains() allow the architecture to convert or
translate these values.
Resctrl shouldn't read or write the ctrl_val[] values directly. Add
a helper to read the current configuration. This will allow another
architecture to scale the bitmaps if necessary, and possibly use
controls that don't take the user-space control format at all.
Of the remaining functions that access ctrl_val[] directly,
apply_config() is part of the architecture-specific code, and is
called via resctrl_arch_update_domains(). reset_all_ctrls() will be an
architecture specific helper.
update_mba_bw() manipulates both ctrl_val[], mbps_val[] and the
hardware. The mbps_val[] that matches the mba_sc state of the resource
is changed, but the other is left unchanged. Abstracting this is the
subject of later patches that affect set_mba_sc() too.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-17-james.morse@arm.com
|
|
Even though ID_AA64MMFR0.PARANGE reports 52 bit PA size support, it cannot
be enabled as guest IPA size on 4K or 16K page size configurations. Hence
kvm_ipa_limit must be restricted to 48 bits. This change achieves required
IPA capping.
Before the commit c9b69a0cf0b4 ("KVM: arm64: Don't constrain maximum IPA
size based on host configuration"), the problem here would have been just
latent via PHYS_MASK_SHIFT (which earlier in turn capped kvm_ipa_limit),
which remains capped at 48 bits on 4K and 16K configs.
Cc: Marc Zyngier <maz@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: kvmarm@lists.cs.columbia.edu
Cc: linux-kernel@vger.kernel.org
Fixes: c9b69a0cf0b4 ("KVM: arm64: Don't constrain maximum IPA size based on host configuration")
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1628680275-16578-1-git-send-email-anshuman.khandual@arm.com
|
|
update_domains() merges the staged configuration changes into the arch
codes configuration array. Rename to make it clear it is part of the
arch code interface to resctrl.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-16-james.morse@arm.com
|
|
Streamline the Stage-2 TGRAN value extraction from ID_AA64MMFR0 register by
adding a page size agnostic ID_AA64MMFR0_TGRAN_2_SHIFT. This is similar to
the existing Stage-1 TGRAN shift i.e ID_AA64MMFR0_TGRAN_SHIFT.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: kvmarm@lists.cs.columbia.edu
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1628569782-30213-1-git-send-email-anshuman.khandual@arm.com
|
|
Before the CDP resources can be merged, struct rdt_domain will need an
array of struct resctrl_staged_config, one per type of configuration.
Use the type as an index to the array to ensure that a schema
configuration string can't specify the same domain twice. This will
allow two schemata to apply configuration changes to one resource.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-15-james.morse@arm.com
|
|
ID_AA64DFR0_PMUVER_IMP_DEF which indicate implementation defined PMU, never
actually gets used although there are '0xf' instances scattered all around.
Just do the macro replacement to improve readability.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: linux-perf-users@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: kvmarm@lists.cs.columbia.edu
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
When configuration changes are made, the new value is written to struct
rdt_domain's new_ctrl field and the have_new_ctrl flag is set. Later
new_ctrl is copied to hardware by a call to update_domains().
Once the CDP resources are merged, there will be one new_ctrl field in
use by two struct resctrl_schema requiring a per-schema IPI to copy the
value to hardware.
Move new_ctrl and have_new_ctrl into a new struct resctrl_staged_config.
Before the CDP resources can be merged, struct rdt_domain will need an
array of these, one per type of configuration. Using the type as an
index to the array will ensure that a schema configuration string can't
specify the same domain twice.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-14-james.morse@arm.com
|
|
resctrl 'info' directories and schema parsing use the schema name.
This lives in the struct rdt_resource, and is specified by the
architecture code.
Once the CDP resources are merged, there will only be one resource (and
one name) in use by two schemata. To allow the CDP CODE/DATA property to
be the type of configuration the schema uses, the name should also be
per-schema.
Add a name field to struct resctrl_schema, and use this wherever
the schema name is exposed (or read from) user-space. Calculating
max_name_width for padding the schemata file also moves as this is
visible to user-space. As the names in struct rdt_resource already
include the CDP information, schemata_list_create() copies them.
schemata_list_create() includes the length of the CDP suffix when
calculating max_name_width in preparation for CDP resources being
merged.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-13-james.morse@arm.com
|
|
Whether CDP is enabled for a hardware resource like the L3 cache can be
found by inspecting the alloc_enabled flags of the L3CODE/L3DATA struct
rdt_hw_resources, even if they aren't in use.
Once these resources are merged, the flags can't be compared. Whether
CDP is enabled needs tracking explicitly. If another architecture is
emulating CDP the behaviour may not be per-resource. 'cdp_capable' needs
to be visible to resctrl, even if its not in use, as this affects the
padding of the schemata table visible to user-space.
Add cdp_enabled to struct rdt_hw_resource and cdp_capable to struct
rdt_resource. Add resctrl_arch_set_cdp_enabled() to let resctrl enable
or disable CDP on a resource. resctrl_arch_get_cdp_enabled() lets it
read the current state.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-12-james.morse@arm.com
|
|
struct pseudo_lock_region points to the rdt_resource.
Once the resources are merged, this won't be unique. The resource name
is moving into the schema, so that the filesystem portions of resctrl can
generate it.
Swap pseudo_lock_region's rdt_resource pointer for a schema pointer.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-11-james.morse@arm.com
|
|
Once the CDP resources are merged, there will be two struct
resctrl_schema for one struct rdt_resource. CDP becomes a type of
configuration that belongs to the schema.
Helpers like rdtgroup_cbm_overlaps() need access to the schema to query
the configuration (or configurations) based on schema properties.
Change these functions to take a struct schema instead of the struct
rdt_resource. All the modified functions are part of the filesystem code
that will move to /fs/resctrl once it is possible to support a second
architecture.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-10-james.morse@arm.com
|
|
To initialise struct resctrl_schema's num_closid, schemata_list_create()
reaches into the architectures private structure to retrieve num_closid
from the struct rdt_hw_resource. The 'half the closids' behaviour should
be part of the filesystem parts of resctrl that are the same on any
architecture. struct resctrl_schema's num_closid should include any
correction for CDP.
Having two properties called num_closid is likely to be confusing when
they have different values.
Add a helper to read the resource's num_closid from the arch code.
This should return the number of closid that the resource supports,
regardless of whether CDP is in use. Once the CDP resources are merged,
schemata_list_create() can apply the correction itself.
Using a type with an obvious size for the arch helper means changing the
type of num_closid to u32, which matches the type already used by struct
rdtgroup.
reset_all_ctrls() does not use resctrl_arch_get_num_closid(), even
though it sets up a structure for modifying the hardware. This function
will be part of the architecture code, the maximum closid should be the
maximum value the hardware has, regardless of the way resctrl is using
it. All the uses of num_closid in core.c are naturally part of the
architecture specific code.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-9-james.morse@arm.com
|
|
Struct resctrl_schema holds properties that vary with the style of
configuration that resctrl applies to a resource. There are already
two values for the hardware's num_closid, depending on whether the
architecture presents the L3 or L3CODE/L3DATA resources.
As the way CDP changes the number of control groups that resctrl can
create is part of the user-space interface, it should be managed by the
filesystem parts of resctrl. This allows the architecture code to only
describe the value the hardware supports.
Add num_closid to resctrl_schema. This is the value seen by the
filesystem, which may be different to the maximum value described by the
arch code when CDP is enabled.
These functions operate on the num_closid value that is exposed to
user-space:
* rdtgroup_parse_resource()
* rdtgroup_schemata_show()
* rdt_num_closids_show()
* closid_init()
Change them to use the schema value instead. schemata_list_create() sets
this value, and reaches into the architecture-specific structure to get
the value. This will eventually be replaced with a helper.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-8-james.morse@arm.com
|
|
When parsing a schema configuration value from user-space, resctrl walks
the architectures rdt_resources_all[] array to find a matching struct
rdt_resource.
Once the CDP resources are merged there will be one resource in use
by two schemata. Anything walking rdt_resources_all[] on behalf of a
user-space request should walk the list of struct resctrl_schema
instead.
Change the users of for_each_alloc_enabled_rdt_resource() to walk the
schema instead. Schemata were only created for alloc_enabled resources
so these two lists are currently equivalent.
schemata_list_create() and rdt_kill_sb() are ignored. The first
creates the schema list, and will eventually loop over the resource
indexes using an arch helper to retrieve the resource. rdt_kill_sb()
will eventually make use of an arch 'reset everything' helper.
After the filesystem code is moved, rdtgroup_pseudo_locked_in_hierarchy()
remains part of the x86 specific hooks to support pseudo lock. This
code walks each domain, and still does this after the separate resources
are merged.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-7-james.morse@arm.com
|
|
The names of resources are used for the schema name presented to
user-space. The name used is rooted in a structure provided by the
architecture code because the names are different when CDP is enabled.
x86 implements this by swapping between two sets of resource structures
based on their alloc_enabled flag. The type of configuration in-use is
encoded in the name (and cbm_idx_offset).
Once the CDP behaviour is moved into the parts of resctrl that will
move to /fs/, there will be two struct resctrl_schema for one struct
rdt_resource. The schema describes the type of configuration being
applied to the resource. The name of the schema should be generated
by resctrl, base on the type of configuration. To do this struct
resctrl_schema needs to store the type of configuration in use for a
schema.
Create an enum resctrl_conf_type describing the options, and add it to
struct resctrl_schema. The underlying resources are still separate, as
cbm_idx_offset is still in use.
Temporarily label all the entries in rdt_resources_all[] and copy that
value to struct resctrl_schema. Copying the value ensures there is no
mismatch while the filesystem parts of resctrl are modified to use the
schema. Once the resources are merged, the filesystem code can assign
this value based on the schema being created.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-6-james.morse@arm.com
|
|
Many of resctrl's per-schema files return a value from struct
rdt_resource, which they take as their 'priv' pointer.
Moving properties that resctrl exposes to user-space into the core 'fs'
code, (e.g. the name of the schema), means some of the functions that
back the filesystem need the schema struct (to where the properties are
moved), but currently take struct rdt_resource. For example, once the
CDP resources are merged, struct rdt_resource no longer reflects all the
properties of the schema.
For the info dirs that represent a control, the information needed
will be accessed via struct resctrl_schema, as this is how the resource
is being used. For the monitors, its still struct rdt_resource as the
monitors aren't described as schema.
This difference means the type of the private pointers varies between
control and monitor info dirs.
Change the 'priv' pointer to point to struct resctrl_schema for
the per-schema files that represent a control. The type can be
determined from the fflags field. If the flags are RF_MON_INFO, its
a struct rdt_resource. If the flags are RF_CTRL_INFO, its a struct
resctrl_schema. No entry in res_common_files[] has both flags.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lkml.kernel.org/r/20210728170637.25610-5-james.morse@arm.com
|
|
The __pkvm_create_mappings() function is no longer used outside of
nvhe/mm.c, make it static.
Signed-off-by: Quentin Perret <qperret@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210809152448.1810400-22-qperret@google.com
|
|
The host kernel is currently able to change EL2 stage-1 mappings without
restrictions thanks to the __pkvm_create_mappings() hypercall. But in a
world where the host is no longer part of the TCB, this clearly poses a
problem.
To fix this, introduce a new hypercall to allow the host to share a
physical memory page with the hypervisor, and remove the
__pkvm_create_mappings() variant. The new hypercall implements
ownership and permission checks before allowing the sharing operation,
and it annotates the shared page in the hypervisor stage-1 and host
stage-2 page-tables.
Signed-off-by: Quentin Perret <qperret@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210809152448.1810400-21-qperret@google.com
|
|
Refactor the hypervisor stage-1 locking in nVHE protected mode to expose
a new pkvm_create_mappings_locked() function. This will be used in later
patches to allow walking and changing the hypervisor stage-1 without
releasing the lock.
Signed-off-by: Quentin Perret <qperret@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210809152448.1810400-20-qperret@google.com
|
|
Now that we mark memory owned by the hypervisor in the host stage-2
during __pkvm_init(), we no longer need to rely on the host to
explicitly mark the hyp sections later on.
Remove the __pkvm_mark_hyp() hypercall altogether.
Signed-off-by: Quentin Perret <qperret@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210809152448.1810400-19-qperret@google.com
|
|
As the hypervisor maps the host's .bss and .rodata sections in its
stage-1, make sure to tag them as shared in hyp and host page-tables.
But since the hypervisor relies on the presence of these mappings, we
cannot let the host in complete control of the memory regions -- it
must not unshare or donate them to another entity for example. To
prevent this, let's transfer the ownership of those ranges to the
hypervisor itself, and share the pages back with the host.
Signed-off-by: Quentin Perret <qperret@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210809152448.1810400-18-qperret@google.com
|
|
Introduce helper functions in the KVM stage-2 and stage-1 page-table
manipulation library allowing to retrieve the enum kvm_pgtable_prot of a
PTE. This will be useful to implement custom walkers outside of
pgtable.c.
Signed-off-by: Quentin Perret <qperret@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210809152448.1810400-17-qperret@google.com
|
|
Introduce a helper usable in nVHE protected mode to check whether a
physical address is in a RAM region or not.
Signed-off-by: Quentin Perret <qperret@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210809152448.1810400-16-qperret@google.com
|
