| Age | Commit message (Collapse) | Author |
|---|
|
Currently, there are three static keys in the resctrl file system:
rdt_mon_enable_key and rdt_alloc_enable_key indicate if the monitoring
feature and the allocation feature are enabled, respectively. The
rdt_enable_key is enabled when either the monitoring feature or the
allocation feature is enabled.
If no monitoring feature is present (either hardware doesn't support a
monitoring feature or the feature is disabled by the kernel command line
option "rdt="), rdt_enable_key is still enabled but rdt_mon_enable_key
is disabled.
MBM is a monitoring feature. The MBM overflow handler intends to
check if the monitoring feature is not enabled for fast return.
So check the rdt_mon_enable_key in it instead of the rdt_enable_key as
former is the more accurate check.
[ bp: Massage commit message. ]
Fixes: e33026831bdb ("x86/intel_rdt/mbm: Handle counter overflow")
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/1576094705-13660-1-git-send-email-xiaochen.shen@intel.com
|
|
New Zhaoxin family 7 CPUs are not affected by the SWAPGS vulnerability. So
mark these CPUs in the cpu vulnerability whitelist accordingly.
Signed-off-by: Tony W Wang-oc <TonyWWang-oc@zhaoxin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/1579227872-26972-3-git-send-email-TonyWWang-oc@zhaoxin.com
|
|
New Zhaoxin family 7 CPUs are not affected by SPECTRE_V2. So define a
separate cpu_vuln_whitelist bit NO_SPECTRE_V2 and add these CPUs to the cpu
vulnerability whitelist.
Signed-off-by: Tony W Wang-oc <TonyWWang-oc@zhaoxin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/1579227872-26972-2-git-send-email-TonyWWang-oc@zhaoxin.com
|
|
/proc/cpuinfo currently reports Hardware Lock Elision (HLE) feature to
be present on boot cpu even if it was disabled during the bootup. This
is because cpuinfo_x86->x86_capability HLE bit is not updated after TSX
state is changed via the new MSR IA32_TSX_CTRL.
Update the cached HLE bit also since it is expected to change after an
update to CPUID_CLEAR bit in MSR IA32_TSX_CTRL.
Fixes: 95c5824f75f3 ("x86/cpu: Add a "tsx=" cmdline option with TSX disabled by default")
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Neelima Krishnan <neelima.krishnan@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/2529b99546294c893dfa1c89e2b3e46da3369a59.1578685425.git.pawan.kumar.gupta@linux.intel.com
|
|
In validating the checksumming results of the new routine, I sadly
neglected to test its not-checksumming results. Thus it slipped through
that the one case where @buff is already dword-aligned and @len = 0
manages to defeat the tail-masking logic and behave as if @len = 8.
For a zero length it doesn't make much sense to deference @buff anyway,
so just add an early return (which has essentially zero impact on
performance).
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The Denali NAND controller IP has separate reset control for the
controller core and registers.
Add the reset-names, and one more phandle accordingly. This is the
approved DT-binding.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
The Denali NAND controller IP has separate reset control for the
controller core and registers.
Add the reset-names, and one more phandle accordingly. This is the
approved DT-binding.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
The function name suggests that this is a boolean checking whether the
architecture asks for an update of the VDSO data, but it works the other
way round. To spare further confusion invert the logic.
Fixes: 44f57d788e7d ("timekeeping: Provide a generic update_vsyscall() implementation")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200114185946.656652824@linutronix.de
|
|
That bit is documented in TLFS 5.0c as follows:
Setting the polling bit will have the effect of unmasking an
interrupt source, except that an actual interrupt is not generated.
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20191222233404.1629-1-wei.liu@kernel.org
|
|
When CONFIG_PROC_FS is disabled, the compiler warns about an unused
variable:
arch/x86/kernel/apic/x2apic_uv_x.c: In function 'uv_setup_proc_files':
arch/x86/kernel/apic/x2apic_uv_x.c:1546:8: error: unused variable 'name' [-Werror=unused-variable]
char *name = hubless ? "hubless" : "hubbed";
Simplify the code so this variable is no longer needed.
Fixes: 8785968bce1c ("x86/platform/uv: Add UV Hubbed/Hubless Proc FS Files")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191212140419.315264-1-arnd@arndb.de
|
|
The kernel stashes the current task struct in sp_el0 so that this can be
acquired consistently/cheaply when required. When we take an exception
from EL0 we have to:
1) stash the original sp_el0 value
2) find the current task
3) update sp_el0 with the current task pointer
Currently steps #1 and #2 occur in one place, and step #3 a while later.
As the value of sp_el0 is immaterial between these points, let's move
them together to make the code clearer and minimize ifdeffery. This
necessitates moving the comment for MDSCR_EL1.SS.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
For most of the exception entry code, <foo>_handler() is the first C
function called from the entry assembly in entry-common.c, and external
functions handling the bulk of the logic are called do_<foo>().
For consistency, apply this scheme to el0_svc_handler and
el0_svc_compat_handler, renaming them to do_el0_svc and
do_el0_svc_compat respectively.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Almost all functions in entry-common.c are marked notrace, with
el1_undef and el1_inv being the only exceptions. We appear to have done
this on the assumption that there were no exception registers that we
needed to snapshot, and thus it was safe to run trace code that might
result in further exceptions and clobber those registers.
However, until we inherit the DAIF flags, our irq flag tracing is stale,
and this discrepancy could set off warnings in some configurations. For
example if CONFIG_DEBUG_LOCKDEP is selected and a trace function calls
into any flag-checking locking routines. Given we don't expect to
trigger el1_undef or el1_inv unless something is already wrong, any
irqflag warnigns are liable to mask the information we'd actually care
about.
Let's keep things simple and mark el1_undef and el1_inv as notrace.
Developers can trace do_undefinstr and bad_mode if they really want to
monitor these cases.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
These days arm64 kernels are always SMP, and thus smp_dmb is an
overly-long way of writing dmb. Naturally, no-one uses it.
Remove the unused macro.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
We haven't needed the inherit_daif macro since commit:
ed3768db588291dd ("arm64: entry: convert el1_sync to C")
... which converted all callers to C and the local_daif_inherit
function.
Remove the unused macro.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently, the arm64 __cpu_setup has hard-coded constants for the memory
attributes that go into the MAIR_EL1 register. Define proper macros in
asm/sysreg.h and make use of them in proc.S.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The "silver" KRYO3XX and KRYO4XX CPU cores are not affected by Spectre
variant 2. Add them to spectre_v2 safe list to correct the spurious
ARM_SMCCC_ARCH_WORKAROUND_1 warning and vulnerability status reported
under sysfs.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
[will: tweaked commit message to remove stale mention of "gold" cores]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The PCIe Root Port driver for CPU Complex PCIe Root Ports are not
loaded on SNR.
The device ID for SNR PCIe3 unit is used by both uncore driver and the
PCIe Root Port driver. If uncore driver is loaded, the PCIe Root Port
driver never be probed.
Remove the PCIe3 unit for SNR for now. The support for PCIe3 unit will
be added later separately.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200116200210.18937-2-kan.liang@linux.intel.com
|
|
An Oops during the boot is found on some SNR machines. It turns out
this is because the snr_uncore_imc_freerunning_events[] array was
missing an end-marker.
Fixes: ee49532b38dd ("perf/x86/intel/uncore: Add IMC uncore support for Snow Ridge")
Reported-by: Like Xu <like.xu@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Like Xu <like.xu@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200116200210.18937-1-kan.liang@linux.intel.com
|
|
The IMC uncore support is missed for E3-1585 v5 CPU.
Intel Xeon E3 V5 Family has Sky Lake CPU.
Add the PCI ID of IMC for Intel Xeon E3 V5 Family.
Reported-by: Rosales-fernandez, Carlos <carlos.rosales-fernandez@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Rosales-fernandez, Carlos <carlos.rosales-fernandez@intel.com>
Link: https://lkml.kernel.org/r/1578687311-158748-1-git-send-email-kan.liang@linux.intel.com
|
|
Arm64 has a more optimized spinning loop (atomic_cond_read_acquire)
using wfe for spinlock that can boost performance of sibling threads
by putting the current cpu to a wait state that is broken only when
the monitored variable changes or an external event happens.
OSQ has a more complicated spinning loop. Besides the lock value, it
also checks for need_resched() and vcpu_is_preempted(). The check for
need_resched() is not a problem as it is only set by the tick interrupt
handler. That will be detected by the spinning cpu right after iret.
The vcpu_is_preempted() check, however, is a problem as changes to the
preempt state of of previous node will not affect the wait state. For
ARM64, vcpu_is_preempted is not currently defined and so is a no-op.
Will has indicated that he is planning to para-virtualize wfe instead
of defining vcpu_is_preempted for PV support. So just add a comment in
arch/arm64/include/asm/spinlock.h to indicate that vcpu_is_preempted()
should not be defined as suggested.
On a 2-socket 56-core 224-thread ARM64 system, a kernel mutex locking
microbenchmark was run for 10s with and without the patch. The
performance numbers before patch were:
Running locktest with mutex [runtime = 10s, load = 1]
Threads = 224, Min/Mean/Max = 316/123,143/2,121,269
Threads = 224, Total Rate = 2,757 kop/s; Percpu Rate = 12 kop/s
After patch, the numbers were:
Running locktest with mutex [runtime = 10s, load = 1]
Threads = 224, Min/Mean/Max = 334/147,836/1,304,787
Threads = 224, Total Rate = 3,311 kop/s; Percpu Rate = 15 kop/s
So there was about 20% performance improvement.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200113150735.21956-1-longman@redhat.com
|
|
Description of hardware operation
---------------------------------
The core AMD PMU has a 4-bit wide per-cycle increment for each
performance monitor counter. That works for most events, but
now with AMD Family 17h and above processors, some events can
occur more than 15 times in a cycle. Those events are called
"Large Increment per Cycle" events. In order to count these
events, two adjacent h/w PMCs get their count signals merged
to form 8 bits per cycle total. In addition, the PERF_CTR count
registers are merged to be able to count up to 64 bits.
Normally, events like instructions retired, get programmed on a single
counter like so:
PERF_CTL0 (MSR 0xc0010200) 0x000000000053ff0c # event 0x0c, umask 0xff
PERF_CTR0 (MSR 0xc0010201) 0x0000800000000001 # r/w 48-bit count
The next counter at MSRs 0xc0010202-3 remains unused, or can be used
independently to count something else.
When counting Large Increment per Cycle events, such as FLOPs,
however, we now have to reserve the next counter and program the
PERF_CTL (config) register with the Merge event (0xFFF), like so:
PERF_CTL0 (msr 0xc0010200) 0x000000000053ff03 # FLOPs event, umask 0xff
PERF_CTR0 (msr 0xc0010201) 0x0000800000000001 # rd 64-bit cnt, wr lo 48b
PERF_CTL1 (msr 0xc0010202) 0x0000000f004000ff # Merge event, enable bit
PERF_CTR1 (msr 0xc0010203) 0x0000000000000000 # wr hi 16-bits count
The count is widened from the normal 48-bits to 64 bits by having the
second counter carry the higher 16 bits of the count in its lower 16
bits of its counter register.
The odd counter, e.g., PERF_CTL1, is programmed with the enabled Merge
event before the even counter, PERF_CTL0.
The Large Increment feature is available starting with Family 17h.
For more details, search any Family 17h PPR for the "Large Increment
per Cycle Events" section, e.g., section 2.1.15.3 on p. 173 in this
version:
https://www.amd.com/system/files/TechDocs/56176_ppr_Family_17h_Model_71h_B0_pub_Rev_3.06.zip
Description of software operation
---------------------------------
The following steps are taken in order to support reserving and
enabling the extra counter for Large Increment per Cycle events:
1. In the main x86 scheduler, we reduce the number of available
counters by the number of Large Increment per Cycle events being
scheduled, tracked by a new cpuc variable 'n_pair' and a new
amd_put_event_constraints_f17h(). This improves the counter
scheduler success rate.
2. In perf_assign_events(), if a counter is assigned to a Large
Increment event, we increment the current counter variable, so the
counter used for the Merge event is removed from assignment
consideration by upcoming event assignments.
3. In find_counter(), if a counter has been found for the Large
Increment event, we set the next counter as used, to prevent other
events from using it.
4. We perform steps 2 & 3 also in the x86 scheduler fastpath, i.e.,
we add Merge event accounting to the existing used_mask logic.
5. Finally, we add on the programming of Merge event to the
neighbouring PMC counters in the counter enable/disable{_all}
code paths.
Currently, software does not support a single PMU with mixed 48- and
64-bit counting, so Large increment event counts are limited to 48
bits. In set_period, we zero-out the upper 16 bits of the count, so
the hardware doesn't copy them to the even counter's higher bits.
Simple invocation example showing counting 8 FLOPs per 256-bit/%ymm
vaddps instruction executed in a loop 100 million times:
perf stat -e cpu/fp_ret_sse_avx_ops.all/,cpu/instructions/ <workload>
Performance counter stats for '<workload>':
800,000,000 cpu/fp_ret_sse_avx_ops.all/u
300,042,101 cpu/instructions/u
Prior to this patch, the reported SSE/AVX FLOPs retired count would
be wrong.
[peterz: lots of renames and edits to the code]
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
AMD Family 17h processors and above gain support for Large Increment
per Cycle events. Unfortunately there is no CPUID or equivalent bit
that indicates whether the feature exists or not, so we continue to
determine eligibility based on a CPU family number comparison.
For Large Increment per Cycle events, we add a f17h-and-compatibles
get_event_constraints_f17h() that returns an even counter bitmask:
Large Increment per Cycle events can only be placed on PMCs 0, 2,
and 4 out of the currently available 0-5. The only currently
public event that requires this feature to report valid counts
is PMCx003 "Retired SSE/AVX Operations".
Note that the CPU family logic in amd_core_pmu_init() is changed
so as to be able to selectively add initialization for features
available in ranges of backward-compatible CPU families. This
Large Increment per Cycle feature is expected to be retained
in future families.
A side-effect of assigning a new get_constraints function for f17h
disables calling the old (prior to f15h) amd_get_event_constraints
implementation left enabled by commit e40ed1542dd7 ("perf/x86: Add perf
support for AMD family-17h processors"), which is no longer
necessary since those North Bridge event codes are obsoleted.
Also fix a spelling mistake whilst in the area (calulating ->
calculating).
Fixes: e40ed1542dd7 ("perf/x86: Add perf support for AMD family-17h processors")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191114183720.19887-2-kim.phillips@amd.com
|
|
Comet Lake supports the same RAPL counters like Kaby Lake and Skylake.
After this, on CML machine the energy counters appear in perf list.
Signed-off-by: Harry Pan <harry.pan@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191227171944.1.Id6f3ab98474d7d1dba5b95390b24e0a67368d364@changeid
|
|
Add power-domains entry for smmu, so that the it is accessible as long
as the driver is active. Without this device shutdown is throwing the
below warning:
"[ 44.736348] arm-smmu-v3 36600000.smmu: failed to clear cr0"
Reported-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
|
|
The MCU System control module support is added to the device tree to allow
drivers to access to their System control module registers.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
|
|
Add IRQ line for IO expander present on wkup_i2c bus on AM654 EVM
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
|
|
AM654 SoC has two Cadence OSPI controller instances under Flash
subsystem (FSS). Add DT nodes for the same.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
|
|
Enable I2Cs, ADCs, OSPIs and UFS peripherals present on J721e.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
|
|
Implement the H_SVM_INIT_ABORT hcall which the Ultravisor can use to
abort an SVM after it has issued the H_SVM_INIT_START and before the
H_SVM_INIT_DONE hcalls. This hcall could be used when Ultravisor
encounters security violations or other errors when starting an SVM.
Note that this hcall is different from UV_SVM_TERMINATE ucall which
is used by HV to terminate/cleanup an VM that has becore secure.
The H_SVM_INIT_ABORT basically undoes operations that were done
since the H_SVM_INIT_START hcall - i.e page-out all the VM pages back
to normal memory, and terminate the SVM.
(If we do not bring the pages back to normal memory, the text/data
of the VM would be stuck in secure memory and since the SVM did not
go secure, its MSR_S bit will be clear and the VM wont be able to
access its pages even to do a clean exit).
Based on patches and discussion with Paul Mackerras, Ram Pai and
Bharata Rao.
Signed-off-by: Ram Pai <linuxram@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
Add 'skip_page_out' parameter to kvmppc_uvmem_drop_pages() so the
callers can specify whetheter or not to skip paging out pages. This
will be needed in a follow-on patch that implements H_SVM_INIT_ABORT
hcall.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
Given that in kvm_create_vm() there is:
kvm->mm = current->mm;
And that on every kvm_*_ioctl we have:
if (kvm->mm != current->mm)
return -EIO;
I see no reason to keep using current->mm instead of kvm->mm.
By doing so, we would reduce the use of 'global' variables on code, relying
more in the contents of kvm struct.
Signed-off-by: Leonardo Bras <leonardo@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
Given that in kvm_create_vm() there is:
kvm->mm = current->mm;
And that on every kvm_*_ioctl we have:
if (kvm->mm != current->mm)
return -EIO;
I see no reason to keep using current->mm instead of kvm->mm.
By doing so, we would reduce the use of 'global' variables on code, relying
more in the contents of kvm struct.
Signed-off-by: Leonardo Bras <leonardo@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
Fixes gcc '-Wunused-but-set-variable' warning:
arch/powerpc/kvm/emulate_loadstore.c: In function kvmppc_emulate_loadstore:
arch/powerpc/kvm/emulate_loadstore.c:87:6: warning: variable ra set but not used [-Wunused-but-set-variable]
arch/powerpc/kvm/emulate_loadstore.c: In function kvmppc_emulate_loadstore:
arch/powerpc/kvm/emulate_loadstore.c:87:10: warning: variable rs set but not used [-Wunused-but-set-variable]
arch/powerpc/kvm/emulate_loadstore.c: In function kvmppc_emulate_loadstore:
arch/powerpc/kvm/emulate_loadstore.c:87:14: warning: variable rt set but not used [-Wunused-but-set-variable]
They are not used since commit 2b33cb585f94 ("KVM: PPC: Reimplement
LOAD_FP/STORE_FP instruction mmio emulation with analyse_instr() input")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"I've been sitting on these longer than I meant, so the patch count is
a bit higher than ideal for this part of the release. There's also
some reverts of double-applied patches that brings the diffstat up a
bit.
With that said, the biggest changes are:
- Revert of duplicate i2c device addition on two Aspeed (BMC)
Devicetrees.
- Move of two device nodes that got applied to the wrong part of the
tree on ASpeed G6.
- Regulator fix for Beaglebone X15 (adding 12/5V supplies)
- Use interrupts for keys on Amlogic SM1 to avoid missed polls
In addition to that, there is a collection of smaller DT fixes:
- Power supply assignment fixes for i.MX6
- Fix of interrupt line for magnetometer on i.MX8 Librem5 devkit
- Build fixlets (selects) for davinci/omap2+
- More interrupt number fixes for Stratix10, Amlogic SM1, etc.
- ... and more similar fixes across different platforms
And some non-DT stuff:
- optee fix to register multiple shared pages properly
- Clock calculation fixes for MMP3
- Clock fixes for OMAP as well"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits)
MAINTAINERS: Add myself as the co-maintainer for Actions Semi platforms
ARM: dts: imx7: Fix Toradex Colibri iMX7S 256MB NAND flash support
ARM: dts: imx6sll-evk: Remove incorrect power supply assignment
ARM: dts: imx6sl-evk: Remove incorrect power supply assignment
ARM: dts: imx6sx-sdb: Remove incorrect power supply assignment
ARM: dts: imx6qdl-sabresd: Remove incorrect power supply assignment
ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL
ARM: omap2plus: select RESET_CONTROLLER
ARM: davinci: select CONFIG_RESET_CONTROLLER
ARM: dts: aspeed: rainier: Fix fan fault and presence
ARM: dts: aspeed: rainier: Remove duplicate i2c busses
ARM: dts: aspeed: tacoma: Remove duplicate flash nodes
ARM: dts: aspeed: tacoma: Remove duplicate i2c busses
ARM: dts: aspeed: tacoma: Fix fsi master node
ARM: dts: aspeed-g6: Fix FSI master location
ARM: dts: mmp3: Fix the TWSI ranges
clk: mmp2: Fix the order of timer mux parents
ARM: mmp: do not divide the clock rate
arm64: dts: rockchip: Fix IR on Beelink A1
optee: Fix multi page dynamic shm pool alloc
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
More dts changes for omaps for v5.6 merge window
Add basic support for first generation Amazon omap3-echo. This got
applied rather late as we discussed how to deal with SoC variants
with some accelerators unaccessible, and eventually ended up setting
up few more SoC specific dtsi files. Eventually we'll need to also
detect the disabled accelerators on driver init, but more patching
is needed for that.
* tag 'omap-for-v5.6/dt-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Add omap3-echo
ARM: dts: Add dtsi files for AM3703, AM3715 and DM3725
Link: https://lore.kernel.org/r/pull-1579200367-372444@atomide.com-4
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc
SMC related changes for omaps for v5.6 merge window
A series of changes to use optee SMC calls if optee is initialized by
the bootloader. Based on the discussions on LAKML in mailing list thread
"arm_smccc_smc as generic smc interface?" we don't want to add more quirk
handling to arm_smccc_smc() and want to handle it locally instead.
* tag 'omap-for-v5.6/soc-smc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: sleep43xx: Call secure suspend/resume handlers
ARM: OMAP2+: Use ARM SMC Calling Convention when OP-TEE is available
ARM: OMAP2+: Introduce check for OP-TEE in omap_secure_init()
ARM: OMAP2+: Add omap_secure_init callback hook for secure initialization
Link: https://lore.kernel.org/r/pull-1579200367-372444@atomide.com-2
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Since the Actions Semi platform has been enabled in defconfig, let's
also enable the relevant device drivers there.
Link: https://lore.kernel.org/r/20200114084348.25659-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Remove fixed clock and source common clock for UART controllers.
Link: https://lore.kernel.org/r/20200114040311.6599-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Add clock controller support for Bitmain BM1880 SoC.
Link: https://lore.kernel.org/r/20200114040311.6599-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt
ARM: dts: Amlogic updates for v5.6
- add DDR clock controller
- GPU OPP updates
* tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson8b: use the actual frequency for the GPU's 364MHz OPP
ARM: dts: meson8: use the actual frequency for the GPU's 182.1MHz OPP
ARM: dts: meson8b: fix the clock controller compatible string
ARM: dts: meson8b: add the DDR clock controller
ARM: dts: meson8: add the DDR clock controller
ARM: dts: meson: provide the XTAL clock using a fixed-clock
dt-bindings: clock: meson8b: add the clock inputs
dt-bindings: clock: add the Amlogic Meson8 DDR clock controller binding
Link: https://lore.kernel.org/r/7hwo9udi7m.fsf@baylibre.com
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt
arm64: dts: Amlogic updates for v5.6
- new boards: libretech-pc (S912 and S905D versions)
- new board: Videostrong KII Pro
- A1: add reset controller
* tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: meson: add audio fifo depths
arm64: dts: meson: add libretech-pc boards support
dt-bindings: arm: amlogic: add libretech-pc bindings
arm64: dts: meson: gxl: add i2c C pins
arm64: dts: meson-sm1: add video decoder compatible
arm64: dts: meson-g12-common: add video decoder node
arm64: dts: meson-gxbb: add support for Videostrong KII Pro
dt-bindings: arm: amlogic: add Videostrong KII Pro bindings
dt-bindings: Add vendor prefix for Videostrong
arm64: dts: meson: a1: add pinctrl controller support
arm64: dts: meson: add reset controller for Meson-A1 SoC
Link: https://lore.kernel.org/r/7hsgkidi3k.fsf@baylibre.com
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM dts updates for v5.6
* Add SAW L2 nodes to boot secondary cpus on IPQ40xx
* Fix remaining IRQ_TYPE_NONE on APQ8084
* Update tsens node to new style
* Add modem remoteproc node to MSM8974
* Move ADSP SMD edge into ADSP remoteproc node for MSM8974
* Add and enable wireless communication subsystem on MSM8974 and Fairphone 2
* Add MSM8974 interconnect provider nodes
* Add MSM8974 OCMEM node
* tag 'qcom-dts-for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: Add nodes for SMP boot in IPQ40xx
ARM: dts: qcom: apq8084: Remove all instances of IRQ_TYPE_NONE
ARM: dts: qcom: apq8084: Change tsens definition to new style
ARM: dts: msm8974: Move ADSP smd edge to ADSP PIL
ARM: dts: msm8974: Add modem remoteproc node
ARM: dts: msm8974-FP2: Introduce the wcnss remoteproc node
ARM: dts: msm8974: Introduce the wcnss remoteproc node
ARM: dts: qcom: msm8974: add interconnect nodes
ARM: dts: qcom: msm8974: add ocmem node
Link: https://lore.kernel.org/r/20200113204448.GE3325@yoga
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM defconfig updates for v5.6
* Enable anx78xx HDMI bridge driver
* Enable MSM8974 interconnect provider driver
* tag 'qcom-defconfig-for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: qcom_defconfig: add anx78xx HDMI bridge support
ARM: qcom_defconfig: add msm8974 interconnect support
Link: https://lore.kernel.org/r/20200113204313.GC3325@yoga
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DT updates for v5.6
* Align SDM845 firmware paths with linux-firmware
* Make WiFi work on Dragonboard845c
* Wire up wakeup controller for SDM845
* Critical thermal interrupt support for SDM845, MSM8996 and MSM8998
* Enable UFS for SM8150
* Add remoteproc enablers and nodes for SM8150
* Add CPUfreq for SM8150
* Add RPMH power-domain node for SM8150
* Cleanup and refactor MSM8996 dts structure
* Add initial Inforce Computing IFC6640 dts
* Increase MSM8996 core voltage
* Fix MSM8996 USB phy settings
* Add missing alias for BLSP UART in MSM8998 MTP
* Add remoteproc nodes for ADSP, modem and sensor core for MSM8998
* Enable WiFI for MSM8998
* Introduce the SC7180 platform and the IDP development board
* Add CPUfreq, QUPs, USB, remoteproc etc for SC7180
* Enable USB OTG for Dragonboard 410c
* Add vibrator motor node for PM8916
* Properly specify APCS clocks for MSM8916
* Add CPR and HFPLL for QCS404
* Enable full CPUfreq (with AVS) for QCS404
* tag 'qcom-arm64-for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (88 commits)
arm64: dts: qcom: sdm845: move gpu zap nodes to per-device dts
arm64: dts: qcom: sm8150: Hard code rpmhpd constants
arm64: dts: apq8096-db820c: Fix VDD core voltage
arm64: dts: qcom: qcs404-evb: Set vdd_apc regulator in high power mode
arm64: dts: qcom: msm8998-mtp: Add alias for blsp1_uart3
arm64: dts: qcom: sc7180: Add critical interrupt and cooling maps for TSENS in SC7180
arm64: dts: qcom: msm8996: Fix venus iommu nodename error
arm64: dts: qcom: sdm845: add the ufs reset
arm64: dts: qcom: sm8150: Fix UFS phy register size
arm64: dts: qcom: sm8150-mtp: Add UFS gpio reset
arm64: dts: qcom: qcs404: Add CPR and populate OPP table
arm64: dts: qcom: qcs404: Add DVFS support
arm64: dts: qcom: qcs404: Add the clocks for APCS mux/divider
arm64: dts: qcom: qcs404: Add HFPLL node
arm64: dts: qcom: msm8916: Add the clocks for the APCS mux/divider
arm64: dts: qcom: sc7180: Add rpmh power-domain node
arm64: dts: pm8004: Add SPMI regulator and add phandles to lsids
arm64: dts: msm8998: thermal: Add critical interrupt support
arm64: dts: msm8996: thermal: Add critical interrupt support
arm64: dts: qcom: db845c: Move remoteproc firmware to sdm845
...
Link: https://lore.kernel.org/r/20200113204225.GB3325@yoga
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM64 defconfig updates for v5.6
* Enable NVMEM and OSM CPUfreq drivers
* Enable CPR driver
* Enable HFPLL driver
* Enable ATH10k SNOC driver
* Enable PMIC thermal driver
* Enable wakeup controller driver
* Enable watchdog driver
* Enable PRNG driver
* Enable SN65DSI86 DSI to DisplayPort bridge driver
* Enable QCA Bluetooth driver
* Enable Qualcomm SoCinfo driver
* Enable SPI and QSPI drivers
* Enable drivers providing remoteproc dependencies
* tag 'qcom-arm64-defconfig-for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: enable CONFIG_ARM_QCOM_CPUFREQ_NVMEM
arm64: defconfig: enable CONFIG_QCOM_CPR
arm64: defconfig: Enable HFPLL
arm64: defconfig: Enable ATH10K_SNOC
arm64: defconfig: Enable QCOM PMIC thermal
arm64: defconfig: enable PDC interrupt controller for Qualcomm SDM845
arm64: defconfig: Enable Qualcomm watchdog driver
arm64: defconfig: Enable Qualcomm pseudo rng
arm64: defconfig: Enable SN65DSI86 display bridge
arm64: defconfig: Enable QCA Bluetooth over UART
arm64: defconfig: Enable Qualcomm CPUfreq HW driver
arm64: defconfig: Enable Qualcomm socinfo driver
arm64: defconfig: Enable Qualcomm SPI and QSPI controller
arm64: defconfig: Enable Qualcomm remoteproc dependencies
Link: https://lore.kernel.org/r/20200113204130.GA3325@yoga
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/soc
AT91 SoC for 5.5
- Document new SoC: sam9x60
- rework sam9x60 Kconfig option
* tag 'at91-5.6-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: Documentation: add sam9x60 product and datasheet
ARM: at91: pm: use of_device_id array to find the proper shdwc node
ARM: at91: pm: use SAM9X60 PMC's compatible
ARM: debug-ll: select DEBUG_AT91_RM9200_DBGU for sam9x60
drivers: soc: atmel: select POWER_RESET_AT91_SAMA5D2_SHDWC for sam9x60
power: reset: Kconfig: select POWER_RESET_AT91_RESET for sam9x60
drivers: soc: atmel: move sam9x60 under its own config flag
ARM: at91: pm: move SAM9X60's PM under its own SoC config flag
ARM: at91: Kconfig: add config flag for SAM9X60 SoC
ARM: at91: Kconfig: add sam9x60 pll config flag
Link: https://lore.kernel.org/r/20200113161612.GA1358903@piout.net
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig
AT91 defconfig for 5.6
- Add sam9x60 to at91_dt_defconfig
* tag 'at91-5.6-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: configs: at91: enable config flags for sam9x60 SoC
ARM: configs: at91: use savedefconfig
Link: https://lore.kernel.org/r/20200113161033.GA1358651@piout.net
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 DT for 5.6
- Fix sama5d3 peripheral clock rate range
- New boards: Overkiz Smartikz and Kizbox Mini, Microchip SAMA5D27
wlsom1-ek
- sama5d2 sdmcc fixes
* tag 'at91-5.6-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama5d3: define clock rate range for tcb1
ARM: dts: at91: sama5d3: fix maximum peripheral clock rates
ARM: dts: at91: nattis 2: remove unnecessary include
ARM: dts: at91: add smartkiz support and a common kizboxmini dtsi file
dt-bindings: arm: at91: Document Kizboxmini and Smartkiz boards binding
ARM: dts: at91: rearrange kizbox dts using aliases nodes
ARM: dts: at91: sama5d27_som1_ek: add the microchip,sdcal-inverted on sdmmc0
ARM: dts: at91: Reenable UART TX pull-ups
ARM: dts: at91: sama5d2: set the sdmmc gclk frequency
ARM: dts: at91: sama5d27_som1_ek: add i2c filters properties
ARM: dts: at91: sama5d27_wlsom1: add SAMA5D27 wlsom1 and wlsom1-ek
dt-bindings: ARM: at91: Document SAMA5D27 WLSOM1 and Evaluation Kit
ARM: dts: at91: sama5d2: mark secumod as a GPIO controller
ARM: dts: at91: sama5d2: disable pwm0 by default
Link: https://lore.kernel.org/r/20200113155423.GA1357189@piout.net
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt
mt8173:
- add dynamic power coefficient to the cpu clusters
- add jpeg decoder node
mt8183:
- add node for the Global Command Engine (gce)
- add reset cells to the infracfg node
* tag 'v5.5-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm64: dts: mt8183: add reset-cells in infracfg
arm64: dts: mt8173: add Mediatek JPEG Codec
arm64: dts: add gce node for mt8183
arm64: dts: mt8173: Add dynamic power node.
Link: https://lore.kernel.org/r/46c1a244-3f74-8069-6600-8ced02775677@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
|
