summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2019-12-11arm64: dts: imx8mn-evk: enable usb1 and typec supportLi Jun
USB1 port has typec connector with power delivery support: - Dual data role: host and device. - Dual power role: source and sink, prefer power sink. Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11arm64: dts: imx8mn: Remove setting for IMX8MN_CLK_USB_CORE_REFLi Jun
Since IMX8MN_CLK_USB_CORE_REF is not used at all, so remove the setting for it. Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11arm64: dts: lx2160a: add RGMII phy nodesIoana Ciornei
Annotate the EMDIO1 node and describe the 2 AR8035 RGMII PHYs. Also, add phy-handles for dpmac17 and dpmac18 to its associated PHY. The MAC is not capable to add the needed RGMII delays, thus the "rgmii-id" phy-connection-type is used. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11arm64: dts: lx2160a: add emdio1 nodeIoana Ciornei
Add the External MDIO1 device node found in the WRIOP global memory region. This is needed for management of external PHYs. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11arm64: dts: ls1088a: Add QSPI support for NXP LS1088Ashish Kumar
Add QSPI node in dtsi(ls1088a), and dts(ls1088ardb, ls1088aqds) boards. Both ls1088ardb and ls1088aqds has two 64MB flash from SPANSION(s25fs512s). QUAD I/O is tested in case of read and single I/O is tested in case of write. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11arm64: dts: ls208x: Remove non-compatible driver device from qspi nodeAshish Kumar
Since device properties are different, so remove fsl, ls1021a-qspi. ls1021a-qspi is to be used only for Big-endian verion of QSPI controller Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11arm64: dts: ls1046a: Update QSPI node properties of ls1046ardbAshish Kumar
Update the compatibles to use jedec,spi-nor. Also update the max-frequency to 50MHz and spi-tx-bus-width to 1. Align the QSPI node with other similar boards like(ls1088ardb, ls1046afrwy) as per bindings. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11arm64: dts: ls1046a: Add QSPI node for ls1046afrwyKuldeep Singh
This board has a single 64MB mt25qu512a flash. QUAD I/O read and single I/O write is tested. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11arm64: dts: ls1028a: Add FlexSPI supportAshish Kumar
Add fspi node property for LS1028A SoC for FlexSPI driver. Property added for FlexSPI controller and for the connected slave device for the LS1028ARDB and LS1028AQDS target. RDB and QDS are having one SPI-NOR flash device, mt35xu02g connected at CS0. This flash device "mt35xu02g" is tested for octal read Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11ARM: configs: imx_v6_v7_defconfig: enable USB ACMPeter Chen
It is used for USB CDC ACM function. Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11ARM: dts: imx7ulp-com: Add initial support for i.MX7UP COM boardFabio Estevam
The Embedded Artists COM board is based on NXP i.MX7ULP. It has a BD70528 PMIC from Rohm with discrete DCDC powering option and improved current observability (compared to the existing NXP i.MX7ULP EVK). Add the initial support for the board. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-10ARM: dts: rockchip: Add brcm bluetooth for rk3288-veyronAbhishek Pandit-Subedi
This enables the Broadcom uart bluetooth driver on uart0 and gives it ownership of its gpios. In order to use this, you must enable the following kconfig options: - CONFIG_BT_HCIUART_BCM - CONFIG_SERIAL_DEV This is applicable to rk3288-veyron series boards that use the bcm43540 wifi+bt chips. As part of this change, also refactor the pinctrl across the various boards. All the boards using broadcom bluetooth shouldn't touch the bt_dev_wake pin. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20191127223909.253873-2-abhishekpandit@chromium.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-12-10sh: kgdb: Mark expected switch fall-throughsKuninori Morimoto
Mark switch cases where we are expecting to fall through. This patch fixes the following error: LINUX/arch/sh/kernel/kgdb.c: In function 'kgdb_arch_handle_exception': LINUX/arch/sh/kernel/kgdb.c:267:6: error: this statement may fall through [-Werror=implicit-fallthrough=] if (kgdb_hex2long(&ptr, &addr)) ^ LINUX/arch/sh/kernel/kgdb.c:269:2: note: here case 'D': ^~~~ Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-12-10ARM: dts: bcm283x: Fix critical trip pointStefan Wahren
During definition of the CPU thermal zone of BCM283x SoC family there was a misunderstanding of the meaning "criticial trip point" and the thermal throttling range of the VideoCore firmware. The latter one takes effect when the core temperature is at least 85 degree celsius or higher So the current critical trip point doesn't make sense, because the thermal shutdown appears before the firmware has a chance to throttle the ARM core(s). Fix these unwanted shutdowns by increasing the critical trip point to a value which shouldn't be reached with working thermal throttling. Fixes: 0fe4d2181cc4 ("ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-12-10ftrace: Fix function_graph tracer interaction with BPF trampolineAlexei Starovoitov
Depending on type of BPF programs served by BPF trampoline it can call original function. In such case the trampoline will skip one stack frame while returning. That will confuse function_graph tracer and will cause crashes with bad RIP. Teach graph tracer to skip functions that have BPF trampoline attached. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-12-10x86/Kconfig: Fix Kconfig indentationKrzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Cc: xen-devel@lists.xenproject.org Link: https://lkml.kernel.org/r/1574306470-10305-1-git-send-email-krzk@kernel.org
2019-12-10ARM: dts: msm8974-FP2: Introduce the wcnss remoteproc nodeLuca Weiss
Enable the remoteproc node and add the necessary pinctrl states. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20191104212302.105469-2-luca@z3ntu.xyz Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10ARM: dts: msm8974: Introduce the wcnss remoteproc nodeBjorn Andersson
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20191104212302.105469-1-luca@z3ntu.xyz Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10ARM: dts: qcom: msm8974: add interconnect nodesBrian Masney
Add interconnect nodes that's needed to support bus scaling. Signed-off-by: Brian Masney <masneyb@onstation.org> Link: https://lore.kernel.org/r/20191024103140.10077-5-masneyb@onstation.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10ARM: dts: qcom: msm8974: add ocmem nodeBrian Masney
Add ocmem node that is needed in order to support the GPU upstream. Signed-off-by: Brian Masney <masneyb@onstation.org> Link: https://lore.kernel.org/r/20191024103140.10077-4-masneyb@onstation.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10ARM: qcom_defconfig: add anx78xx HDMI bridge supportBrian Masney
Add the Analogix anx78xx driver so that the external display over HDMI can be used on Nexus 5 phones. Reviewed-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Brian Masney <masneyb@onstation.org> Link: https://lore.kernel.org/r/20191024103140.10077-3-masneyb@onstation.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10ARM: qcom_defconfig: add msm8974 interconnect supportBrian Masney
Add interconnect support for msm8974-based SoCs in order to support the GPU on this platform. Reviewed-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Brian Masney <masneyb@onstation.org> Link: https://lore.kernel.org/r/20191024103140.10077-2-masneyb@onstation.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10arm64: dts: qcom: setup PDC as the wakeup parent for TLMM on SDM845Lina Iyer
PDC always-on interrupt controller can detect certain GPIOs even when the TLMM interrupt controller is powered off. Link the PDC as TLMM's wakeup parent. Signed-off-by: Lina Iyer <ilina@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1573855915-9841-12-git-send-email-ilina@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10arm64: dts: qcom: add PDC interrupt controller for SDM845Lina Iyer
Add PDC interrupt controller device bindings for SDM845. Signed-off-by: Lina Iyer <ilina@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1573855915-9841-11-git-send-email-ilina@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10arm64: dts: qcom: msm8998: Fix tcsr syscon sizeJeffrey Hugo
The tcsr syscon region is really 0x40000 in size. We need access to the full region so that we can access the axi resets when managing the modem subsystem. Fixes: c7833949564e ("arm64: dts: qcom: msm8998: Add smem related nodes") Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Link: https://lore.kernel.org/r/20191107045948.4341-1-jeffrey.l.hugo@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10arm64: dts: qcom: msm8998: Add wifi nodeJeffrey Hugo
Add the wifi node and required reserved memory to enable the wlan hardware. Enable the wifi node in both the mtp and clamshell platforms after adding the relevant regulators for each platform. Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Link: https://lore.kernel.org/r/20191107043313.4055-3-jeffrey.l.hugo@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10arm64: dts: qcom: msm8998: Add anoc2 smmu nodeJeffrey Hugo
While there are several peripherals on the anoc2, most are not behind the smmu. However, the SoC integrated wlan block is behind the smmu, so we'll need to control the smmu inorder to enable wifi. Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Link: https://lore.kernel.org/r/20191107043313.4055-2-jeffrey.l.hugo@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10arm64: dts: sc7180: Add qupv3_0 and qupv3_1Roja Rani Yarubandi
Add QUP SE instances configuration for sc7180. Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20191108092824.9773-14-rnayak@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10arm64: dts: qcom: SC7180: Add node for rpmhcc clock driverTaniya Das
Add node for rpmhcc clock driver. Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20191108092824.9773-13-rnayak@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10arm64: dts: qcom: sc7180-idp: Add RPMh regulatorsKiran Gunda
Add the rpmh regulators for the sc7180 idp platform. This platform consists of PMIC PM6150 and PM6150l Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Link: https://lore.kernel.org/r/20191108092824.9773-12-rnayak@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10arm64: dts: qcom: pm6150: Add PM6150/PM6150L PMIC peripheralsKiran Gunda
Add PM6150/PM6150L peripherals such as PON, GPIOs, ADC and other PMIC infra modules. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20191108092824.9773-11-rnayak@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10arm64: dts: qcom: sc7180: Add SPMI PMIC arbiter deviceKiran Gunda
Add SPMI PMIC arbiter device to communicate with PMICs attached to SPMI bus. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20191108092824.9773-10-rnayak@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10arm64: dts: qcom: sc7180: Add pdc interrupt controllerMaulik Shah
Add pdc interrupt controller for sc7180 Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20191108092824.9773-9-rnayak@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10arm64: dts: qcom: sc7180: Add rpmh-rsc nodeMaulik Shah
Add device bindings for the application processor's rsc. The rsc contains the TCS that are used for communicating with the hardened resource accelerators on Qualcomm Technologies, Inc. (QTI) SoCs. Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20191108092824.9773-6-rnayak@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10arm64: dts: qcom: sc7180: Add cmd_db reserved areaMaulik Shah
Command_db provides mapping for resource key and address managed by remote processor. Add cmd_db reserved memory area. Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20191108092824.9773-5-rnayak@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10arm64: dts: sc7180: Add device node for apps_smmuVivek Gautam
Adding device node for APPS SMMU that is connected to devices such as display, video, usb, mmc, etc. on SC7180 chipset. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20191108092824.9773-4-rnayak@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10arm64: dts: sc7180: Add minimal dts/dtsi files for SC7180 socRajendra Nayak
Add skeletal sc7180 SoC dtsi and idp board dts files. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Co-developed-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Link: https://lore.kernel.org/r/20191108092824.9773-3-rnayak@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10arm64: dts: sdm845: thermal: Add critical interrupt supportAmit Kucheria
Register critical interrupts for each of the two tsens controllers Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/c536e9cdb448bbad3441f6580fa57f1f921fb580.1573499020.git.amit.kucheria@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10arm64: defconfig: enable PDC interrupt controller for Qualcomm SDM845Lina Iyer
Enable PDC interrupt controller for SDM845 devices. The interrupt controller can detect wakeup capable interrupts when the SoC is in a low power state. Signed-off-by: Lina Iyer <ilina@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1573855915-9841-13-git-send-email-ilina@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10arm64: defconfig: Enable Qualcomm watchdog driverBjorn Andersson
Enable the driver for the watchdog found in the application processor subsystem on most modern Qualcomm platforms. Tested-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10arm64: defconfig: Enable Qualcomm pseudo rngBjorn Andersson
Most Qualcomm platforms contain a pseudo random number generator hardware block. Enable the driver for this block and also enable the interface for exposing this to userspace. Tested-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10arm64: defconfig: Enable SN65DSI86 display bridgeJeffrey Hugo
This enables display on the Lenovo Yoga C630 by connecting the DSI output from the SoC to the eDP input of the panel. Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10arm64: defconfig: Enable QCA Bluetooth over UARTJeffrey Hugo
This enables Bluetooth on the Lenovo Yoga C630. Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10arm64: defconfig: Enable Qualcomm CPUfreq HW driverBjorn Andersson
The Qualcomm CPUfreq HW provides CPU voltage and frequency scaling on many modern Qualcomm SoCs. Enable the driver for this hardware block to enable this functionality on the SDM845 platform. Tested-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10arm64: defconfig: Enable Qualcomm socinfo driverBjorn Andersson
The Qualcomm socinfo driver provides SoC information to userspace using the standard soc interface as well as a number of debugfs entries. Enable this to allow certain user space tools to acquire this information, as well as getting developers access to the information in debugfs that is useful when reporting bugs. Tested-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10arm64: defconfig: Enable Qualcomm SPI and QSPI controllerBjorn Andersson
Enable the drivers for GENI SPI and QSPI controllers found on the Qualcomm SDM845 platform, among others. Tested-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10arm64: defconfig: Enable Qualcomm remoteproc dependenciesBjorn Andersson
Enable the the power domains, reset controllers and remote block device memory access drivers necessary to boot the Audio, Compute and Modem DSPs on Qualcomm SDM845. None of the power domains are system critical, but needs to be builtin as the driver core prohibits probe deferal past late initcall. Reviewed-by: Vinod Koul <vkoul@kernel.org> Tested-by: Alex Elder <elder@linaro.org> Tested-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10ARM: omap2plus_defconfig: Add back DEBUG_FSTony Lindgren
Commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency") removed select for DEBUG_FS but we still need it at least for enabling deeper idle states for the SoCs. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-10ARM: omap2plus_defconfig: enable NET_SWITCHDEVGrygorii Strashko
The TI_CPSW_SWITCHDEV definition in Kconfig was changed from "select NET_SWITCHDEV" to "depends on NET_SWITCHDEV", and therefore it is required to explicitelly enable NET_SWITCHDEV config option in omap2plus_defconfig. Fixes: 3727d259ddaf ("arm: omap2plus_defconfig: enable new cpsw switchdev driver") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-10ARM: dts: am335x-sancloud-bbe: fix phy modeMans Rullgard
The phy mode should be rgmii-id. For some reason, it used to work with rgmii-txid but doesn't any more. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit (git 2.34.1) at 2025-09-24 14:19:06 +0000