summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2014-03-26MIPS: Add MIPS P5600 PRid and cputype identifiersJames Hogan
Add a Processor ID and CPU type for the MIPS P5600 core. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6407/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: Save/restore MSA context around signalsPaul Burton
This patch extends sigcontext in order to hold the most significant 64 bits of each vector register in addition to the MSA control & status register. The least significant 64 bits are already saved as the scalar FP context. This makes things a little awkward since the least & most significant 64 bits of each vector register are not contiguous in memory. Thus the copy_u & insert instructions are used to transfer the values of the most significant 64 bits via GP registers. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6533/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: Warn if vector register partitioning is implementedPaul Burton
No current systems implementing MSA include support for vector register partitioning which makes it somewhat difficult to implement support for it in the kernel. Thus for the moment the kernel includes no such support. However if the kernel were to be run on a system which implemented register partitioning then it would not function correctly, mishandling MSA disabled exceptions. Print a warning if run on a system with vector register partitioning implemented to indicate this problem should it occur. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6494/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: Dumb MSA FP exception handlerPaul Burton
This patch adds a simple handler for MSA FP exceptions which delivers a SIGFPE to the running task. In the future it should probably be extended to re-execute the instruction with the MSACSR.NX bit set in order to generate results for any elements which did not cause an exception before delivering the SIGFPE signal. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6432/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: Basic MSA context switching supportPaul Burton
This patch adds support for context switching the MSA vector registers. These 128 bit vector registers are aliased with the FP registers - an FP register accesses the least significant bits of the vector register with which it is aliased (ie. the register with the same index). Due to both this & the requirement that the scalar FPU must be 64-bit (FR=1) if enabled at the same time as MSA the kernel will enable MSA & scalar FP at the same time for tasks which use MSA. If we restore the MSA vector context then we might as well enable the scalar FPU since the reason it was left disabled was to allow for lazy FP context restoring - but we just restored the FP context as it's a subset of the vector context. If we restore the FP context and have previously used MSA then we have to restore the whole vector context anyway (see comment in enable_restore_fp_context for details) so similarly we might as well enable MSA. Thus if a task does not use MSA then it will continue to behave as without this patch - the scalar FP context will be saved & restored as usual. But if a task executes an MSA instruction then it will save & restore the vector context forever more. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6431/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: Detect the MSA ASEPaul Burton
This patch adds support for probing the MSAP bit within the Config3 register in order to detect the presence of the MSA ASE. Presence of the ASE will be indicated in /proc/cpuinfo. The value of the MSA implementation register will be displayed at boot to aid debugging and verification of a correct setup, as is done for the FPU. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6430/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: Add MSA register definitions & accessPaul Burton
This patch introduces definitions for the MSA control registers and functions which allow access to both the control & vector registers. If the toolchain being used to build the kernel includes support for MSA then this patch will make use of that support & use MSA instructions directly. However toolchain support for MSA is very new & far from a point where it can be reasonably expected that everyone building the kernel uses a toolchain with support. Thus fallbacks using .word assembler directives are also provided for now as a temporary measure. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6429/ Patchwork: https://patchwork.linux-mips.org/patch/6607/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: Don't assume 64-bit FP registers for context switchPaul Burton
When saving or restoring scalar FP context we want to access the least significant 64 bits of each FP register. When the FP registers are 64 bits wide that is trivially the start of the registers value in memory. However when the FP registers are wider this equivalence will no longer be true for big endian systems. Define a new set of offset macros for the least significant 64 bits of each saved FP register within thread context, and make use of them when saving and restoring scalar FP context. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6428/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: Don't assume 64-bit FP registers for FP regsetPaul Burton
When we want to access 64-bit FP register values we can only treat consecutive registers as being consecutive in memory when the width of an FP register equals 64 bits. This assumption will not remain true once MSA support is introduced, so provide a code path which copies each 64 bit FP register value in turn when the width of an FP register differs from 64 bits. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6427/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: Don't assume 64-bit FP registers for dump_{,task_}fpuPaul Burton
This code assumed that saved FP registers are 64 bits wide, an assumption which will no longer be true once MSA is introduced. This patch modifies the code to copy the lower 64 bits of each register in turn, which is safe for any FP register width >= 64 bits. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6425/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: Clear upper bits of FP registers on emulator writesPaul Burton
The upper bits of an FP register are architecturally defined as unpredictable following an instructions which only writes the lower bits. The prior behaviour of the kernel is to leave them unmodified. This patch modifies that to clear the upper bits to zero. This is what the MSA architecture reference manual specifies should happen for its wider registers and is still permissible for scalar FP instructions given the bits unpredictability there. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: sergei.shtylyov@cogentembedded.com Patchwork: https://patchwork.linux-mips.org/patch/6435/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: Replace hardcoded 32 with NUM_FPU_REGS in ptracePaul Burton
NUM_FPU_REGS just makes it clearer what's going on, rather than the magic hard coded 32. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6424/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: Don't require FPU on sigcontext setup/restorePaul Burton
When a task which has used the FPU at some point in its past takes a signal the kernel would previously always require the task to take ownership of the FPU whilst setting up or restoring from the sigcontext. That means that if the task has not used the FPU within this timeslice then the kernel would enable the FPU, restore the task's FP context into FPU registers and then save them into the sigcontext. This seems inefficient, and if the signal handler doesn't use FP then enabling the FPU & the extra memory accesses are entirely wasted work. This patch modifies the sigcontext setup & restore code to copy directly between the tasks saved FP context & the sigcontext for any tasks which have used FP in the past but are not currently the FPU owner (ie. have not used FP in this timeslice). Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Qais Yousef <qais.yousef@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6423/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: Move & rename fpu_emulator_{save,restore}_contextPaul Burton
These functions aren't directly related to the FPU emulator at all, they simply copy between a thread's saved context & a sigcontext. Thus move them to the appropriate signal files & rename them accordingly. This makes it clearer that the functions don't require the FPU emulator in any way. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Qais Yousef <qais.yousef@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6422/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: Update outdated commentPaul Burton
The hard-coded offsets mentioned in this comment seem to not exist anymore, so remove mention of them from the comment. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Qais Yousef <qais.yousef@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6421/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: Simplify FP context accessPaul Burton
This patch replaces the fpureg_t typedef with a "union fpureg" enabling easier access to 32 & 64 bit values. This allows the access macros used in cp1emu.c to be simplified somewhat. It will also make it easier to expand the width of the FP registers as will be done in a future patch in order to support the 128 bit registers introduced with MSA. No behavioural change is intended by this patch. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Qais Yousef <qais.yousef@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6532/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: Select HAVE_ARCH_SECCOMP_FILTERMarkos Chandras
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6401/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: seccomp: Handle indirect system calls (o32)Markos Chandras
When userland uses syscall() to perform an indirect system call the actually system call that needs to be checked by the filter is on the first argument. The kernel code needs to handle this case by looking at the original syscall number in v0 and if it's NR_syscall, then it needs to examine the first argument to identify the real system call that will be executed. Similarly, we need to 'virtually' shift the syscall() arguments so the syscall_get_arguments() function can fetch the correct arguments for the indirect system call. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6404/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: kernel: scalls: Skip the syscall if denied by the seccomp filterMarkos Chandras
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6399/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: ptrace: Move away from secure_computing_strictMarkos Chandras
MIPS now has the infrastructure for dynamic seccomp-bpf filtering Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6400/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: asm: thread_info: Add _TIF_SECCOMP flagMarkos Chandras
Add _TIF_SECCOMP flag to _TIF_WORK_SYSCALL_ENTRY to indicate that the system call needs to be checked against a seccomp filter. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6405/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: asm: syscall: Define syscall_get_archMarkos Chandras
This effectively renames __syscall_get_arch to syscall_get_arch and implements a compatible interface for the seccomp API. The seccomp code (kernel/seccomp.c) expects a syscall_get_arch function to be defined for every architecture, so we drop the leading underscores from the existing function. This also makes use of the 'task' argument to determine the type the process instead of assuming the process has the same characteristics as the kernel it's running on. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6398/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: asm: syscall: Add the syscall_rollback functionMarkos Chandras
The syscall_rollback function is used by seccomp-bpf but it was never added for MIPS. It doesn't need to do anything as none of the registers are clobbered if the system call has been denied by the seccomp filter. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6403/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: Deprecate CONFIG_MIPS_CMPPaul Burton
CONFIG_MIPS_CPS is a better option for systems where it is supported, which as far as I am aware should be all systems where CONFIG_MIPS_CMP could provide any value (ie. where there are multiple cores for YAMON to bring up). This option is therefore deprecated, and marked as such. It is left intact for the time being in order to provide a fallback should someone find a system where CONFIG_MIPS_CPS will not function (ie. where the reset vector cannot be moved), and should be removed entirely in the future assuming that does not happen. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6369/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: MIPS_CMP should depend upon !SMTC, not upon SMVPPaul Burton
Commit f55afb0969cc "MIPS: Clean up MIPS MT and CMP configuration options." introduced a dependency upon MIPS_MT_SMP (ie. SMVP) for the MIPS_CMP (ie. CMP framework support) Kconfig option. It did not specify why, and that dependency is bogus. It is perfectly valid to have a multi-core system with the YAMON bootloader but without MT support - an example of this would be any multi-core proAptiv bitstream running on a Malta. Forcing MT support to be enabled in a kernel for such a system is incorrect. I suspect that the dependency was actually meant to reflect the fact that YAMON will only bind 1 TC per VPE on an MT system, and only describe those 1:1 TC:VPE pairs as CPUs through the AMON interface. Thus an SMTC kernel makes little sense on a system using MIPS_CMP, and the Kconfig dependencies should reflect that rather than introducing the bogus SMVP dependency. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6368/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: More helpful CONFIG_MIPS_CMP label, help textPaul Burton
The prior help text introduced in commit f55afb0969cc "MIPS: Clean up MIPS MT and CMP configuration options." reads as though this option enables the kernel to make use of the CM hardware, which is not true. What it actually does is allow the kernel to interact with the YAMON bootloader which actually interacts with the CM hardware to bring up secondary cores. Re-introduce the word "framework" which that commit removed to avoid misleading people. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6367/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: Remove gcmpregs.hPaul Burton
This header was used only by Malta but is used no longer. Remove it. It was also included unnecessarily in irq-gic.c, so that include is also removed. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6366/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: Malta: Allow use of MIPS CPS SMP implementationPaul Burton
This patch simply attempts to register the MIPS Coherent Processing System SMP implementation when it is enabled. If registering that fails for some reason (like the Kconfig option being disabled or a lack of hardware support) then we fall back to the same SMP implementations as before. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6365/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: Malta: Probe CPC when supportedPaul Burton
When CPC support is compiled into the kernel (ie. CONFIG_MIPS_CPC=y), probe the CPC on boot for Malta in order to allow any users of the CPC to detect its presence & function correctly. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6363/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: Malta: Make use of generic CM supportPaul Burton
Remove the Malta-specific CM probe code and instead make use of the newly added generic CM code. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6364/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: Coherent Processing System SMP implementationPaul Burton
This patch introduces a new SMP implementation for systems implementing the MIPS Coherent Processing System architecture. The kernel will make use of the Coherence Manager, Cluster Power Controller & Global Interrupt Controller in order to detect, bring up & make use of other cores in the system. SMTC is not supported, so only a single TC per VPE in the system is used. That is, this option enables an SMVP style setup but across multiple cores. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6362/ Patchwork: https://patchwork.linux-mips.org/patch/6611/ Patchwork: https://patchwork.linux-mips.org/patch/6651/ Patchwork: https://patchwork.linux-mips.org/patch/6652/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: Add cpu_vpe_id macroPaul Burton
The vpe_id field of struct cpuinfo_mips is only present when one of CONFIG_MIPS_MT_{SMP,SMTC} is enabled. That means that any code accessing which may compile without MT is currently forced to use an #ifdef. Instead this patch provides an accessor macro, #ifdef'd appropriately to prevent further #ifdef's elsewhere. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6646/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26net: Rename skb->rxhash to skb->hashTom Herbert
The packet hash can be considered a property of the packet, not just on RX path. This patch changes name of rxhash and l4_rxhash skbuff fields to be hash and l4_hash respectively. This includes changing uses of the field in the code which don't call the access functions. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-26x86, efi: Abstract x86 efi_early callsMatt Fleming
The ARM EFI boot stub doesn't need to care about the efi_early infrastructure that x86 requires in order to do mixed mode thunking. So wrap everything up in an efi_call_early() macro. This allows x86 to do the necessary indirection jumps to call whatever firmware interface is necessary (native or mixed mode), but also allows the ARM folks to mask the fact that they don't support relocation in the boot stub and need to pass 'sys_table_arg' to every function. [ hpa: there are no object code changes from this patch ] Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/20140326091011.GB2958@console-pimps.org Cc: Roy Franz <roy.franz@linaro.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-03-26KVM: PPC: Book3S HV: Fix KVM hang with CONFIG_KVM_XICS=nAnton Blanchard
I noticed KVM is broken when KVM in-kernel XICS emulation (CONFIG_KVM_XICS) is disabled. The problem was introduced in 48eaef05 (KVM: PPC: Book3S HV: use xics_wake_cpu only when defined). It used CONFIG_KVM_XICS to wrap xics_wake_cpu, where CONFIG_PPC_ICP_NATIVE should have been used. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: stable@vger.kernel.org Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Scott Wood <scottwood@freescale.com>
2014-03-26KVM: PPC: Book3S: Introduce hypervisor call H_GET_TCELaurent Dufour
This introduces the H_GET_TCE hypervisor call, which is basically the reverse of H_PUT_TCE, as defined in the Power Architecture Platform Requirements (PAPR). The hcall H_GET_TCE is required by the kdump kernel, which uses it to retrieve TCEs set up by the previous (panicked) kernel. Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2014-03-26KVM: PPC: Book3S HV: Fix incorrect userspace exit on ioeventfd writeGreg Kurz
When the guest does an MMIO write which is handled successfully by an ioeventfd, ioeventfd_write() returns 0 (success) and kvmppc_handle_store() returns EMULATE_DONE. Then kvmppc_emulate_mmio() converts EMULATE_DONE to RESUME_GUEST_NV and this causes an exit from the loop in kvmppc_vcpu_run_hv(), causing an exit back to userspace with a bogus exit reason code, typically causing userspace (e.g. qemu) to crash with a message about an unknown exit code. This adds handling of RESUME_GUEST_NV in kvmppc_vcpu_run_hv() in order to fix that. For generality, we define a helper to check for either of the return-to-guest codes we use, RESUME_GUEST and RESUME_GUEST_NV, to make it easy to check for either and provide one place to update if any other return-to-guest code gets defined in future. Since it only affects Book3S HV for now, the helper is added to the kvm_book3s.h header file. We use the helper in two places in kvmppc_run_core() as well for future-proofing, though we don't see RESUME_GUEST_NV in either place at present. [paulus@samba.org - combined 4 patches into one, rewrote description] Suggested-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2014-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: Documentation/devicetree/bindings/net/micrel-ks8851.txt net/core/netpoll.c The net/core/netpoll.c conflict is a bug fix in 'net' happening to code which is completely removed in 'net-next'. In micrel-ks8851.txt we simply have overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-25x86, vdso, build: Don't rebuild 32-bit vdsos on every makeAndy Lutomirski
vdso32/vclock_gettime.o was confusing kbuild. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Cc: Stefani Seibold <stefani@seibold.net> Link: http://lkml.kernel.org/r/d741449340642213744dd659471a35bb970a0c4c.1395789923.git.luto@amacapital.net Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-03-26ARM: sun7i/sun6i: dts: Add NMI irqchip supportCarlo Caione
This patch adds DTS entries for NMI controller as child of GIC. Signed-off-by: Carlo Caione <carlo@caione.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-sunxi@googlegroups.com Cc: mark.rutland@arm.com Cc: hdegoede@redhat.com Acked-by: maxime.ripard@free-electrons.com Link: http://lkml.kernel.org/r/1395256879-8475-3-git-send-email-carlo@caione.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-25Merge remote-tracking branches 'asoc/fix/cs42l51', 'asoc/fix/cs42l52', ↵Mark Brown
'asoc/fix/cs42l73', 'asoc/fix/rcar', 'asoc/fix/spear' and 'asoc/fix/tegra' into asoc-linus
2014-03-25x86, vdso: Actually discard the .discard sectionsH. Peter Anvin
The .discard/.discard.* sections are used to generate intermediate results for the assembler (effectively "test assembly".) The output is waste and should not be retained. Cc: Stefani Seibold <stefani@seibold.net> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/n/tip-psizrnant8x3nrhbgvq2vekr@git.kernel.org
2014-03-25ARM: davinci: da850: update SATA AHCI supportBartlomiej Zolnierkiewicz
Update SATA AHCI support to make use of the new ahci_da850 host driver (instead of the generic ahci_platform one) and remove deprecated ahci_platform_data code. Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-03-25x86: hpet: Use proper destructor for delayed workThomas Gleixner
destroy_timer_on_stack() is hardly the right thing for a delayed work. We leak a tracking object for the work itself when DEBUG_OBJECTS is enabled. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/20140323141940.034005322@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-25Merge tag 'kvm-s390-20140325' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-next 3 fixes - memory leak on certain SIGP conditions - wrong size for idle bitmap (always too big) - clear local interrupts on initial CPU reset 1 performance improvement - improve performance with many guests on certain workloads
2014-03-25KVM: s390: clear local interrupts at cpu initial resetJens Freimann
Empty list of local interrupts when vcpu goes through initial reset to provide a clean state Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-03-25KVM: s390: Fix possible memory leak in SIGP functionsThomas Huth
When kvm_get_vcpu() returned NULL for the destination CPU in __sigp_emergency() or __sigp_external_call(), the memory for the "inti" structure was not released anymore. This patch fixes this issue by moving the check for !dst_vcpu before the kzalloc() call. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-03-25KVM: s390: fix calculation of idle_mask array sizeJens Freimann
We need BITS_TO_LONGS, not sizeof(long) to calculate the correct size. idle_mask is a bitmask, each bit representing the state of a cpu. The desired outcome is an array of unsigned long fields that can fit KVM_MAX_VCPUS bits. We should not use sizeof(long) which returnes the size in bytes, but BITS_TO_LONGS Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-03-25KVM: s390: randomize sca addressChristian Borntraeger
We allocate a page for the 2k sca, so lets use the space to improve hit rate of some internal cpu caches. No need to change the freeing of the page, as this will shift away the page offset bits anyway. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
2014-03-25Revert "xen: properly account for _PAGE_NUMA during xen pte translations"David Vrabel
This reverts commit a9c8e4beeeb64c22b84c803747487857fe424b68. PTEs in Xen PV guests must contain machine addresses if _PAGE_PRESENT is set and pseudo-physical addresses is _PAGE_PRESENT is clear. This is because during a domain save/restore (migration) the page table entries are "canonicalised" and uncanonicalised". i.e., MFNs are converted to PFNs during domain save so that on a restore the page table entries may be rewritten with the new MFNs on the destination. This canonicalisation is only done for PTEs that are present. This change resulted in writing PTEs with MFNs if _PAGE_PROTNONE (or _PAGE_NUMA) was set but _PAGE_PRESENT was clear. These PTEs would be migrated as-is which would result in unexpected behaviour in the destination domain. Either a) the MFN would be translated to the wrong PFN/page; b) setting the _PAGE_PRESENT bit would clear the PTE because the MFN is no longer owned by the domain; or c) the present bit would not get set. Symptoms include "Bad page" reports when munmapping after migrating a domain. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: <stable@vger.kernel.org> [3.12+]
generated by cgit (git 2.34.1) at 2025-09-30 18:34:48 +0000