summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2009-01-21x86: set %fs to __KERNEL_PERCPU unconditionally for x86_32Brian Gerst
Impact: cleanup %fs is currently set to __KERNEL_DS at boot, and conditionally switched to __KERNEL_PERCPU for secondary cpus. Instead, initialize GDT_ENTRY_PERCPU to the same attributes as GDT_ENTRY_KERNEL_DS and set %fs to __KERNEL_PERCPU unconditionally. Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-21x86: fix percpu_write with 64-bit constantsBrian Gerst
Impact: slightly better code generation for percpu_to_op() The processor will sign-extend 32-bit immediate values in 64-bit operations. Use the 'e' constraint ("32-bit signed integer constant, or a symbolic reference known to fit that range") for 64-bit constants. Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-21x86: clean up gdt_page definitionBrian Gerst
Impact: cleanup && more compact percpu area layout with future changes Move 64-bit GDT to page-aligned section and clean up comment formatting. Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-21x86: update canary handling during switchTejun Heo
Impact: cleanup In switch_to(), instead of taking offset to irq_stack_union.stack, make it a proper percpu access using __percpu_arg() and per_cpu_var(). Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-21[ARM] pxa: stop and disable IRQ for each DMA channels at startupEric Miao
Some broken bootloaders will leave the DMA channel state unclean, which we should really initialize correctly here. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-01-20powerpc/40x: Update PowerPC 40x defconfigsJosh Boyer
Update the 40x defconfigs for 2.6.29-rc2 Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-01-20x86: remove byte locksJiri Kosina
Impact: cleanup Remove byte locks implementation, which was introduced by Jeremy in 8efcbab6 ("paravirt: introduce a "lock-byte" spinlock implementation"), but turned out to be dead code that is not used by any in-kernel virtualization guest (Xen uses its own variant of spinlocks implementation and KVM is not planning to move to byte locks). Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20powerpc/85xx: Fix typo in mpc8572ds dtsKumar Gala
The localbus node flash had a minor typo for a read-only property. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-20powerpc/44x: Warp patches for the new NDFC driverSean MacLennan
Convert the Warp platform to use the newly merged NDFC driver - warp.dts changed to work with ndfc - warp-nand.c no longer needed - removed obsolete rev A support from cuboot-warp.c Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-01-20powerpc/4xx: DTS: Add Add'l SDRAM0 Compatible and Interrupt InfoGrant Erickson
Added additional information for type and compatibility strings and interrupt information to the SDRAM0 memory-controller device tree nodes for AMCC PowerPC 405EX[r]-based boards to facilitate binding with the new "ibm,sdram-4xx-ddr2" EDAC memory controller adapter driver. Signed-off-by: Grant Erickson <gerickson@nuovations.com> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-01-20x86: optimise x86's do_page_fault (C entry point for the page fault path)Nick Piggin
Impact: cleanup, restructure code to improve assembly gcc isn't _all_ that smart about spilling registers to stack or reusing stack slots, even with branch annotations. do_page_fault contained a lot of functionality, so split unlikely paths into their own functions, and mark them as noinline just to be sure. I consider this actually to be somewhat of a cleanup too: the main function now contains about half the number of lines so the normal path is easier to read, while the error cases are also nicely split away. Also, ensure the order of arguments to functions is always the same: regs, addr, error_code. This can reduce code size a tiny bit, and just looks neater too. And add a couple of branch annotations. Before: do_page_fault: subq $360, %rsp #, After: do_page_fault: subq $56, %rsp #, bloat-o-meter: add/remove: 8/0 grow/shrink: 0/1 up/down: 2222/-1680 (542) function old new delta __bad_area_nosemaphore - 506 +506 no_context - 474 +474 vmalloc_fault - 424 +424 spurious_fault - 358 +358 mm_fault_error - 272 +272 bad_area_access_error - 89 +89 bad_area - 89 +89 bad_area_nosemaphore - 10 +10 do_page_fault 2464 784 -1680 Yes, the total size increases by 542 bytes, due to the extra function calls. But these will very rarely be called (except for vmalloc_fault) in a normal workload. Importantly, do_page_fault is less than 1/3rd it's original size, and touches far less stack. Existing gotos and branch hints did move a lot of the infrequently used text out of the fastpath, but that's even further improved after this patch. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20Merge commit 'v2.6.29-rc2' into x86/mmIngo Molnar
2009-01-20x86, cpumask: fix tlb flush raceIngo Molnar
Impact: fix bootup crash The cpumask is now passed in as a reference to mm->cpu_vm_mask, not on the stack - hence it is not constant anymore during the TLB flush. That way it could race and some static sanity checks would trigger: [ 238.154287] ------------[ cut here ]------------ [ 238.156039] kernel BUG at arch/x86/kernel/tlb_32.c:130! [ 238.156039] invalid opcode: 0000 [#1] SMP [ 238.156039] last sysfs file: /sys/class/net/eth2/address [ 238.156039] Modules linked in: [ 238.156039] [ 238.156039] Pid: 6493, comm: ifup-eth Not tainted (2.6.29-rc2-tip #1) P4DC6 [ 238.156039] EIP: 0060:[<c0118f87>] EFLAGS: 00010202 CPU: 2 [ 238.156039] EIP is at native_flush_tlb_others+0x35/0x158 [ 238.156039] EAX: c0ef972c EBX: f6143301 ECX: 00000000 EDX: 00000000 [ 238.156039] ESI: f61433a8 EDI: f6143200 EBP: f34f3e00 ESP: f34f3df0 [ 238.156039] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 238.156039] Process ifup-eth (pid: 6493, ti=f34f2000 task=f399ab00 task.ti=f34f2000) [ 238.156039] Stack: [ 238.156039] ffffffff f61433a8 ffffffff f6143200 f34f3e18 c0118e9c 00000000 f6143200 [ 238.156039] f61433a8 f5bec738 f34f3e28 c0119435 c2b5b830 f6143200 f34f3e34 c01c2dc3 [ 238.156039] bffd9000 f34f3e60 c01c3051 00000000 ffffffff f34f3e4c 00000000 00000071 [ 238.156039] Call Trace: [ 238.156039] [<c0118e9c>] ? flush_tlb_others+0x52/0x5b [ 238.156039] [<c0119435>] ? flush_tlb_mm+0x7f/0x8b [ 238.156039] [<c01c2dc3>] ? tlb_finish_mmu+0x2d/0x55 [ 238.156039] [<c01c3051>] ? exit_mmap+0x124/0x170 [ 238.156039] [<c013e965>] ? mmput+0x40/0xf5 [ 238.156039] [<c01e4788>] ? flush_old_exec+0x640/0x94b [ 238.156039] [<c01ddb4e>] ? fsnotify_access+0x37/0x39 [ 238.156039] [<c01e3435>] ? kernel_read+0x39/0x4b [ 238.156039] [<c021bc8a>] ? load_elf_binary+0x4a1/0x11bb [ 238.156039] [<c01c0af9>] ? might_fault+0x51/0x9c [ 238.156039] [<c010a2cc>] ? paravirt_read_tsc+0x20/0x4f [ 238.156039] [<c010a406>] ? native_sched_clock+0x5d/0x60 [ 238.156039] [<c01e2fda>] ? search_binary_handler+0xab/0x2c4 [ 238.156039] [<c021b7e9>] ? load_elf_binary+0x0/0x11bb [ 238.156039] [<c04ae9a5>] ? _raw_read_unlock+0x21/0x46 [ 238.156039] [<c021b7e9>] ? load_elf_binary+0x0/0x11bb [ 238.156039] [<c01e2fe1>] ? search_binary_handler+0xb2/0x2c4 [ 238.156039] [<c01e4076>] ? do_execve+0x21c/0x2ee [ 238.156039] [<c01029b7>] ? sys_execve+0x51/0x8c [ 238.156039] [<c0103eaf>] ? sysenter_do_call+0x12/0x43 Fix it by not assuming that the cpumask is constant. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20Merge branch 'tj-percpu' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc into core/percpu
2009-01-19sparc64: Fix DAX handling via userspace access from kernel.David S. Miller
If we do a userspace access from kernel mode, and get a data access exception, we need to check the exception table just like a normal fault does. The spitfire DAX handler was doing this, but such logic was missing from the sun4v DAX code. Reported-by: Dennis Gilmore <dgilmore@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-19sparc64: Annotate sparc64 specific syscalls with SYSCALL_DEFINEx()David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-19[CVE-2009-0029] sparc: Enable syscall wrappers for 64-bitChristian Borntraeger
sparc64 needs sign-extended function parameters. We have to enable the system call wrappers. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20x86: remove pda.hBrian Gerst
Impact: cleanup Signed-off-by: Brian Gerst <brgerst@gmail.com>
2009-01-20x86: move stack_canary into irq_stackBrian Gerst
Impact: x86_64 percpu area layout change, irq_stack now at the beginning Now that the PDA is empty except for the stack canary, it can be removed. The irqstack is moved to the start of the per-cpu section. If the stack protector is enabled, the canary overlaps the bottom 48 bytes of the irqstack. tj: * updated subject * dropped asm relocation of irq_stack_ptr * updated comments a bit * rebased on top of stack canary changes Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-20x86: rework __per_cpu_load adjustmentsBrian Gerst
Impact: cleanup Use cpu_number to determine if the adjustment is necessary. Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-20x86: remove pda_init()Brian Gerst
Impact: cleanup Copy the code to cpu_init() to satisfy the requirement that the cpu be reinitialized. Remove all other calls, since the segments are already initialized in head_64.S. Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-20x86: conditionalize stack canary handling in hot pathTejun Heo
Impact: no unnecessary stack canary swapping during context switch There's no point in moving stack_canary around during context switch if it's not enabled. Conditionalize it. Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-20x86: cleanup stack protectorTejun Heo
Impact: cleanup Make the following cleanups. * remove duplicate comment from boot_init_stack_canary() which fits better in the other place - cpu_idle(). * move stack_canary offset check from __switch_to() to boot_init_stack_canary(). Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-20x86: remove kernel_physical_mapping_init() from init sectionGary Hade
Impact: fix crash with memory hotplug enabled kernel_physical_mapping_init() is called during memory hotplug so it does not belong in the init section. If the kernel is built with CONFIG_DEBUG_SECTION_MISMATCH=y on the make command line, arch/x86/mm/init_64.c is compiled with the -fno-inline-functions-called-once gcc option defeating inlining of kernel_physical_mapping_init() within init_memory_mapping(). When kernel_physical_mapping_init() is not inlined it is placed in the .init.text section according to the __init in it's current declaration. A later call to kernel_physical_mapping_init() during a memory hotplug operation encounters an int3 trap because the .init.text section memory has been freed. This patch eliminates the crash caused by the int3 trap by moving the non-inlined kernel_physical_mapping_init() from .init.text to .meminit.text. Signed-off-by: Gary Hade <garyhade@us.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-20fix: crash: IP: __bitmap_intersects+0x48/0x73Ingo Molnar
-tip testing found this crash: > [ 35.258515] calling acpi_cpufreq_init+0x0/0x127 @ 1 > [ 35.264127] BUG: unable to handle kernel NULL pointer dereference at (null) > [ 35.267554] IP: [<ffffffff80478092>] __bitmap_intersects+0x48/0x73 > [ 35.267554] PGD 0 > [ 35.267554] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c is still broken: there's no allocation of the variable mask, so we pass in an uninitialized cmd.mask field to drv_read(), which then passes it to the scheduler which then crashes ... Switch it over to the much simpler constant-cpumask-pointers approach. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19i.MX31: Image Processing Unit DMA and IRQ driversGuennadi Liakhovetski
i.MX3x SoCs contain an Image Processing Unit, consisting of a Control Module (CM), Display Interface (DI), Synchronous Display Controller (SDC), Asynchronous Display Controller (ADC), Image Converter (IC), Post-Filter (PF), Camera Sensor Interface (CSI), and an Image DMA Controller (IDMAC). CM contains, among other blocks, an Interrupt Generator (IG) and a Clock and Reset Control Unit (CRCU). This driver serves IDMAC and IG. They are supported over dmaengine and irq-chip APIs respectively. IDMAC is a specialised DMA controller, its DMA channels cannot be used for general-purpose operations, even though it might be possible to configure a memory-to-memory channel for memcpy operation. This driver will not work with generic dmaengine clients, clients, wishing to use it must use respective wrapper structures, they also must specify which channels they require, as channels are hard-wired to specific IPU functions. Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-19cpufreq: use work_on_cpu in acpi-cpufreq.c for drv_read and drv_writeMike Travis
Impact: use new work_on_cpu function to reduce stack usage Replace the saving of current->cpus_allowed and set_cpus_allowed_ptr() with a work_on_cpu function for drv_read() and drv_write(). Basically converts do_drv_{read,write} into "work_on_cpu" functions that are now called by drv_read and drv_write. Note: This patch basically reverts 50c668d6 which reverted 7503bfba, now that the work_on_cpu() function is more stable. Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Tested-by: Dieter Ries <clip2@gmx.de> Tested-by: Maciej Rutecki <maciej.rutecki@gmail.com> Cc: Dave Jones <davej@redhat.com> Cc: <cpufreq@vger.kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19sparc64: Initialize FHC/CLOCK LED platform_device 'id' field correctly.David S. Miller
There is only one clock board, so use -1 as the 'id' so we get just the base name as the LED device name string. There are multiple FHC boards potentially in a system so use the board number as the 'id' value for that case. Reported-by: Meelis Roos <mroos@linux.ee> Tested-by: Meelis Roos <mroos@linux.ee> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-19x86: fully honor "nolapic", fixIngo Molnar
Impact: build fix Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-18x86: Remove never-called arch_setup_msi_irq()Michael Ellerman
Since commit 75c46fa, "x64, x2apic/intr-remap: MSI and MSI-X support for interrupt remapping infrastructure", x86 has had an implementation of arch_setup_msi_irqs(). That implementation does not call arch_setup_msi_irq(), instead it calls setup_irq(). No other x86 code calls arch_setup_msi_irq(). That leaves only arch_setup_msi_irqs() in drivers/pci/msi.c, but that routine is overridden by the x86 version of arch_setup_msi_irqs(). So arch_setup_msi_irq() is dead code, remove it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-01-19[ARM] pxa: make more SSCR0 bit definitions visible on multiple processorsEric Miao
The only exclusive definitions are SSCR0_SCR and SSCR0_SerClkDiv(), loosen that exclusive #ifdef .. #else .. #endif to allow other definitions to be visible when slected multiple processors. This helps to pass the building of pxa-ssp.c. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-01-19[ARM] pxa: fix missing of __REG() definition for ac97 registers accessEric Miao
This currently happens for 'drivers/input/touch/mainstone-wm97xx.c'. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-01-19[ARM] pxa: fix NAND and MMC clock initialization for pxa3xxMike Rapoport
After commit 8c3abc7d903df492a7394b0adae4349d9a381aaf ("[ARM] pxa: convert to clkdev and match clocks by struct device where possible") get_clk in pxa3xx_nand fails with -ENOENT. Apparently, clk_get in pxamci will also fail for MCI2 on PXA310. The 'clk_find' and therefore 'clk_get' require driver to supply both 'dev_id' and 'con_id' if they are not NULL in the 'strcut clk_lookup', but neither pxa3xx_nand nor pxamci supply 'con_id'. This patch sets 'con_id' to NULL in NAND clock and MCI2 clock registration. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-01-18x86: fix section mismatch warnings in kernel/setup_percpu.cLeonardo Potenza
The function setup_cpu_local_masks() has been marked __init, in order to remove the following section mismatch messages: WARNING: vmlinux.o(.text+0x3c2c7): Section mismatch in reference from the function setup_cpu_local_masks() to the function .init.text:alloc_bootmem_cpumask_var() The function setup_cpu_local_masks() references the function __init alloc_bootmem_cpumask_var(). This is often because setup_cpu_local_masks lacks a __init annotation or the annotation of alloc_bootmem_cpumask_var is wrong. WARNING: vmlinux.o(.text+0x3c2d3): Section mismatch in reference from the function setup_cpu_local_masks() to the function .init.text:alloc_bootmem_cpumask_var() The function setup_cpu_local_masks() references the function __init alloc_bootmem_cpumask_var(). This is often because setup_cpu_local_masks lacks a __init annotation or the annotation of alloc_bootmem_cpumask_var is wrong. WARNING: vmlinux.o(.text+0x3c2df): Section mismatch in reference from the function setup_cpu_local_masks() to the function .init.text:alloc_bootmem_cpumask_var() The function setup_cpu_local_masks() references the function __init alloc_bootmem_cpumask_var(). This is often because setup_cpu_local_masks lacks a __init annotation or the annotation of alloc_bootmem_cpumask_var is wrong. WARNING: vmlinux.o(.text+0x3c2eb): Section mismatch in reference from the function setup_cpu_local_masks() to the function .init.text:alloc_bootmem_cpumask_var() The function setup_cpu_local_masks() references the function __init alloc_bootmem_cpumask_var(). This is often because setup_cpu_local_masks lacks a __init annotation or the annotation of alloc_bootmem_cpumask_var is wrong. Signed-off-by: Leonardo Potenza <lpotenza@inwind.it> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-18x86: put trigger in to detect mismatched apic versionsMike Travis
Impact: add debug warning Fire off one message if two apic's discovered with different apic versions. (this code is only called during CPU init) The goal of this is to pave the way of the removal of the apic_version[] array. We dont expect any apic version incompatibilities in the x86 landscape of systems [if so we dont handle them very well and probably never will handle deep apic version assymetries well], but it's prudent to have a debug check for one kernel cycle nevertheless. Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-18x86, rdc321x: remove/move leftover filesIngo Molnar
Impact: cleanup Move/remove leftover RDC321 files. Now that it's not a subarch anymore, arch/x86/mach-rdc321x and arch/x86/include/asm/mach-rdc321x/ are not needed. One include file was still in use: rdc321x_defs.h, move that to the generic x86 asm header directory. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-18Merge branch 'core/percpu' into stackprotectorIngo Molnar
Conflicts: arch/x86/include/asm/pda.h arch/x86/include/asm/system.h Also, moved include/asm-x86/stackprotector.h to arch/x86/include/asm. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-19x86-64: Use absolute displacements for per-cpu accesses.Brian Gerst
Accessing memory through %gs should not use rip-relative addressing. Adding a P prefix for the argument tells gcc to not add (%rip) to the memory references. Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-19x86-64: Move isidle from PDA to per-cpu.Brian Gerst
tj: s/isidle/is_idle/ Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-19x86-64: Move nodenumber from PDA to per-cpu.Brian Gerst
tj: * s/nodenumber/node_number/ * removed now unused pda variable from pda_init() Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-19x86-64: Move irqcount from PDA to per-cpu.Brian Gerst
tj: s/irqcount/irq_count/ Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-19x86-64: Move oldrsp from PDA to per-cpu.Brian Gerst
tj: * in asm-offsets_64.c, pda.h inclusion shouldn't be removed as pda is still referenced in the file * s/oldrsp/old_rsp/ Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-19x86-64: Move kernelstack from PDA to per-cpu.Brian Gerst
Also clean up PER_CPU_VAR usage in xen-asm_64.S tj: * remove now unused stack_thread_info() * s/kernelstack/kernel_stack/ * added FIXME comment in xen-asm_64.S Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-19x86-64: Move current task from PDA to per-cpu and consolidate with 32-bit.Brian Gerst
Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-19x86-64: Move cpu number from PDA to per-cpu and consolidate with 32-bit.Brian Gerst
tj: moved cpu_number definition out of CONFIG_HAVE_SETUP_PER_CPU_AREA for voyager. Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-19x86-64: Convert exception stacks to per-cpuBrian Gerst
Move the exception stacks to per-cpu, removing specific allocation code. Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-19x86-64: Convert irqstacks to per-cpuBrian Gerst
Move the irqstackptr variable from the PDA to per-cpu. Make the stacks themselves per-cpu, removing some specific allocation code. Add a seperate flag (is_boot_cpu) to simplify the per-cpu boot adjustments. tj: * sprinkle some underbars around. * irq_stack_ptr is not used till traps_init(), no reason to initialize it early. On SMP, just leaving it NULL till proper initialization in setup_per_cpu_areas() works. Dropped is_boot_cpu and early irq_stack_ptr initialization. * do DECLARE/DEFINE_PER_CPU(char[IRQ_STACK_SIZE], irq_stack) instead of (char, irq_stack[IRQ_STACK_SIZE]). Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-19x86-64: Move TLB state from PDA to per-cpu and consolidate with 32-bit.Brian Gerst
Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-19x86-64: Move irq stats from PDA to per-cpu and consolidate with 32-bit.Brian Gerst
Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-17sparc64: fix modpost failureSam Ravnborg
Previously PeeCeeI.o was a library but it was always pulled in due to insw and friends being exported (at least for a modular kernel). But this resulted in modpost failures if there where no in-kernel users because then insw & friends were not linked in. Fix this by including PeeCeeI.o in the kernel unconditionally. The only drawback for this solution is that a nonmodular kernel will always include insw & friends no matter if they are in use or not. Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-24 08:40:50 +0000