summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2013-07-19perf, kvm: Support the in_tx/in_tx_cp modifiers in KVM arch perfmon emulation v5Andi Kleen
[KVM maintainers: The underlying support for this is in perf/core now. So please merge this patch into the KVM tree.] This is not arch perfmon, but older CPUs will just ignore it. This makes it possible to do at least some TSX measurements from a KVM guest v2: Various fixes to address review feedback v3: Ignore the bits when no CPUID. No #GP. Force raw events with TSX bits. v4: Use reserved bits for #GP v5: Remove obsolete argument Acked-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-19arm64: use common reboot infrastructureMarc Zyngier
Commit 7b6d864b48d9 (reboot: arm: change reboot_mode to use enum reboot_mode) changed the way reboot is handled on arm, which has a direct impact on arm64 as we share the reset driver on the VE platform. The obvious fix is to move arm64 to use the same infrastructure. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> [catalin.marinas@arm.com: removed reboot_mode = REBOOT_HARD default setting] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-07-19arm64: mm: don't treat user cache maintenance faults as writesWill Deacon
On arm64, cache maintenance faults appear as data aborts with the CM bit set in the ESR. The WnR bit, usually used to distinguish between faulting loads and stores, always reads as 1 and (slightly confusingly) the instructions are treated as reads by the architecture. This patch fixes our fault handling code to treat cache maintenance faults in the same way as loads. Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-07-19arm64: add '#ifdef CONFIG_COMPAT' for aarch32_break_handler()Chen Gang
If 'COMPAT' not defined, aarch32_break_handler() cannot pass compiling, and it can work independent with 'COMPAT', so remove dummy definition. The related error: arch/arm64/kernel/debug-monitors.c:249:5: error: redefinition of ‘aarch32_break_handler’ In file included from arch/arm64/kernel/debug-monitors.c:29:0: /root/linux-next/arch/arm64/include/asm/debug-monitors.h:89:12: note: previous definition of ‘aarch32_break_handler’ was here Signed-off-by: Chen Gang <gang.chen@asianux.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-07-19arm64: Only enable local interrupts after the CPU is marked onlineCatalin Marinas
There is a slight chance that (timer) interrupts are triggered before a secondary CPU has been marked online with implications on softirq thread affinity. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Kirill Tkhai <tkhai@yandex.ru>
2013-07-19MIPS: kvm: Kconfig: Drop HAVE_KVM dependency from VIRTUALIZATIONMarkos Chandras
Virtualization does not always need KVM capabilities so drop the dependency. The KVM symbol already depends on HAVE_KVM. Fixes the following problem on a randconfig: warning: (REMOTEPROC && RPMSG) selects VIRTUALIZATION which has unmet direct dependencies (HAVE_KVM) warning: (REMOTEPROC && RPMSG) selects VIRTUALIZATION which has unmet direct dependencies (HAVE_KVM) Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5443/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-19Merge branch 'omap-for-v3.11/dt-fixes' into omap-for-v3.11/fixesTony Lindgren
2013-07-19um: remove dead codeRichard Weinberger
"me" is not used. Signed-off-by: Richard Weinberger <richard@nod.at>
2013-07-19um: siginfo cleanupRichard Weinberger
Currently we use both struct siginfo and siginfo_t. Let's use struct siginfo internally to avoid ongoing compiler warning. We are allowed to do so because struct siginfo and siginfo_t are equivalent. Signed-off-by: Richard Weinberger <richard@nod.at>
2013-07-19MIPS: Octeon: Fix DT pruning bug with pip portsFaidon Liambotis
During the pruning of the device tree octeon_fdt_pip_iface() is called for each PIP interface and every port up to the port count is removed from the device tree. However, the count was set to the return value of cvmx_helper_interface_enumerate() which doesn't actually return the count but just returns zero on success. This effectively removed *all* ports from the tree. Use cvmx_helper_ports_on_interface() instead to fix this. This successfully restores the 3 ports of my ERLite-3 and fixes the "kernel assigns random MAC addresses" issue. Signed-off-by: Faidon Liambotis <paravoid@debian.org> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5587/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-19uml: Fix which_tmpdir failure when /dev/shm is a symlink, and in other edge ↵Tristan Schmelcher
cases which_tmpdir did the wrong thing if /dev/shm was a symlink (e.g., to /run/shm), if there were multiple mounts on top of each other, if the mount(s) were obscured by a later mount, or if /dev/shm was a prefix of another mount point. This fixes these cases. Applies to 3.9.6. Signed-off-by: Tristan Schmelcher <tschmelcher@google.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2013-07-19um: Fix wait_stub_done() error handlingRichard Weinberger
If we die within a stub handler we only way to reliable kill the (obviously) dying uml guest process is killing it's host twin on the host side. Signed-off-by: Richard Weinberger <richard@nod.at>
2013-07-19um: Mark stub pages mapping with VM_PFNMAPRichard Weinberger
Ensure that a process cannot destroy his stub pages with using MADV_DONTNEED and friends. Reported-by: toralf.foerster@gmx.de Signed-off-by: Richard Weinberger <richard@nod.at>
2013-07-19um: Fix return value of strnlen_user()Richard Weinberger
In case of an error it must not return -EFAULT. Return 0 like all other archs do. Reported-by: toralf.foerster@gmx.de Signed-off-by: Richard Weinberger <richard@nod.at>
2013-07-19MIPS: KVM: Mark KVM_GUEST (T&E KVM) as BROKEN_ON_SMPJames Hogan
Make KVM_GUEST depend on BROKEN_ON_SMP so that it cannot be enabled with SMP. SMP kernels use ll/sc instructions for an atomic section in the tlb fill handler, with a tlbp instruction contained in the middle. This cannot be emulated with trap & emulate KVM because the tlbp instruction traps and the eret to return to the guest code clears the LLbit which makes the sc instruction always fail. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Sanjay Lal <sanjayl@kymasys.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5588/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-19MIPS: tlbex: fix broken build in v3.11-rc1Aaro Koskinen
Commit 6ba045f9fbdafb48da42aa8576ea7a3980443136 (MIPS: Move generated code to .text for microMIPS) deleted tlbmiss_handler_setup_pgd_array, but some references were not converted. Fix that to enable building a MIPS kernel. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Jayachandran C. <jchandra@broadcom.com> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5589/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-19MIPS: Netlogic: Add XLP PIC irqdomainJayachandran C
Add a legacy irq domain for the XLP PIC interrupts. This will be used when interrupts are assigned from the device tree. This change is required after commit c5cdc67 "irqdomain: Remove temporary MIPS workaround code". Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Cc: Jayachandran C <jchandra@broadcom.com> Patchwork: https://patchwork.linux-mips.org/patch/5597/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-19MIPS: Netlogic: Fix USB block's coherent DMA maskGanesan Ramalingam
The on-chip USB controller on Netlogic XLP does not suppport DMA beyond 32-bit physical address. Set the coherent_dma_mask of the USB in its PCI fixup to support this. Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Jayachandran C. <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5596/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-19MIPS: tlbex: Fix typo in r3000 tlb store handlerTony Wu
commit 6ba045f (MIPS: Move generated code to .text for microMIPS) causes a panic at boot. The handler builder should test against handle_tlbs_end, not handle_tlbs. Signed-off-by: Tony Wu <tung7970@gmail.com> Acked-by: Jayachandran C. <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5600/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-19MIPS: BMIPS: Fix thinko to release slave TP from resetFlorian Fainelli
Commit 4df715aa ["MIPS: BMIPS: support booting from physical CPU other than 0"] introduced a thinko which will prevents slave CPUs from being released from reset on systems where we boot from TP0. The problem is that we are checking whether the slave CPU logical CPU map is 0, which is never true for systems booting from TP0, so we do not release the slave TP from reset and we are just stuck. Fix this by properly checking that the CPU we intend to boot really is the physical slave CPU (logical and physical value being 1). Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: blogic@openwrt.org Cc: jogo@openwrt.org Cc: cernekee@gmail.com Cc: Florian Fainelli <florian@openwrt.org> Patchwork: https://patchwork.linux-mips.org/patch/5598/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-19kprobes/x86: Remove unused text_poke_smp() and text_poke_smp_batch() functionsMasami Hiramatsu
Since introducing the text_poke_bp() for all text_poke_smp*() callers, text_poke_smp*() are now unused. This patch basically reverts: 3d55cc8a058e ("x86: Add text_poke_smp for SMP cross modifying code") 7deb18dcf047 ("x86: Introduce text_poke_smp_batch() for batch-code modifying") and related commits. This patch also fixes a Kconfig dependency issue on STOP_MACHINE in the case of CONFIG_SMP && !CONFIG_MODULE_UNLOAD. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jiri Kosina <jkosina@suse.cz> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jason Baron <jbaron@akamai.com> Cc: yrl.pp-manager.tt@hitachi.com Cc: Borislav Petkov <bpetkov@suse.de> Link: http://lkml.kernel.org/r/20130718114753.26675.18714.stgit@mhiramat-M0-7522 Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-07-19kprobes/x86: Use text_poke_bp() instead of text_poke_smp*()Masami Hiramatsu
Use text_poke_bp() for optimizing kprobes instead of text_poke_smp*(). Since the number of kprobes is usually not so large (<100) and text_poke_bp() is much lighter than text_poke_smp() [which uses stop_machine()], this just stops using batch processing. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jiri Kosina <jkosina@suse.cz> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jason Baron <jbaron@akamai.com> Cc: yrl.pp-manager.tt@hitachi.com Cc: Borislav Petkov <bpetkov@suse.de> Link: http://lkml.kernel.org/r/20130718114750.26675.9174.stgit@mhiramat-M0-7522 Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-07-19kprobes/x86: Remove an incorrect comment about int3 in NMI/MCEMasami Hiramatsu
Remove a comment about an int3 issue in NMI/MCE, since commit: 3f3c8b8c4b2a ("x86: Add workaround to NMI iret woes") already fixed that. Keeping this incorrect comment can mislead developers. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jiri Kosina <jkosina@suse.cz> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jason Baron <jbaron@akamai.com> Cc: yrl.pp-manager.tt@hitachi.com Cc: Borislav Petkov <bpetkov@suse.de> Link: http://lkml.kernel.org/r/20130718114747.26675.84110.stgit@mhiramat-M0-7522 Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-07-19Merge branch 'x86/jumplabel' into perf/coreIngo Molnar
Upcoming kprobes patches rely on the int3 code-patching machinery introduced by: fd4363fff3d9 x86: Introduce int3 (breakpoint)-based instruction patching Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-07-19Merge tag 'perf-core-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: * Add missing 'finished_round' event forwarding in 'perf inject', from Adrian Hunter. * Assorted tidy ups, from Adrian Hunter. * Fall back to sysfs event names when parsing fails, from Andi Kleen. * List pmu events in perf list, from Andi Kleen. * Cleanup some memory allocation/freeing uses, from David Ahern. * Add option to collapse undesired parts of call graph, from Greg Price. * Prep work for multi perf data file storage, from Jiri Olsa. * Add support for more than two files comparision in 'perf diff', from Jiri Olsa * A few more 'perf test' improvements, from Jiri Olsa * libtraceevent cleanups, from Namhyung Kim. * Remove odd build stall in 'perf sched' by moving a large struct initialization from a local variable to a global one, from Namhyung Kim. * Add support for callchains in the gtk UI, from Namhyung Kim. * Do not apply symfs for an absolute vmlinux path, fix from Namhyung Kim. * Use default include path notation for libtraceevent, from Robert Richter. * Fix 'make tools/perf', from Robert Richter. * Make Power7 events available, from Runzhen Wang. * Add --objdump option to 'perf top', from Sukadev Bhattiprolu. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-07-18Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "Trying again to get the fixes queue, including the fixed IDT alignment patch. The UEFI patch is by far the biggest issue at hand: it is currently causing quite a few machines to boot. Which is sad, because the only reason they would is because their BIOSes touch memory that has already been freed. The other major issue is that we finally have tracked down the root cause of a significant number of machines failing to suspend/resume" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Make sure IDT is page aligned x86, suspend: Handle CPUs which fail to #GP on RDMSR x86/platform/ce4100: Add header file for reboot type Revert "UEFI: Don't pass boot services regions to SetVirtualAddressMap()" efivars: check for EFI_RUNTIME_SERVICES
2013-07-18ARM: msm: dts: Fix the gpio register address for msm8960Rohit Vaswani
Fix the the gpio reg address for the device tree entry. Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2013-07-18Merge branch 'cpuinit_phase2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux Pull phase two of __cpuinit removal from Paul Gortmaker: "With the __cpuinit infrastructure removed earlier, this group of commits only removes the function/data tagging that was done with the various (now no-op) __cpuinit related prefixes. Now that the dust has settled with yesterday's v3.11-rc1, there hopefully shouldn't be any new users leaking back in tree, but I think we can leave the harmless no-op stubs there for a release as a courtesy to those who still have out of tree stuff and weren't paying attention. Although the commits are against the recent tag to allow for minor context refreshes for things like yesterday's v3.11-rc1~ slab content, the patches have been largely unchanged for weeks, aside from such trivial updates. For detail junkies, the largely boring and mostly irrelevant history of the patches can be viewed at: http://git.kernel.org/cgit/linux/kernel/git/paulg/cpuinit-delete.git If nothing else, I guess it does at least demonstrate the level of involvement required to shepherd such a treewide change to completion. This is the same repository of patches that has been applied to the end of the daily linux-next branches for the past several weeks" * 'cpuinit_phase2' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (28 commits) block: delete __cpuinit usage from all block files drivers: delete __cpuinit usage from all remaining drivers files kernel: delete __cpuinit usage from all core kernel files rcu: delete __cpuinit usage from all rcu files net: delete __cpuinit usage from all net files acpi: delete __cpuinit usage from all acpi files hwmon: delete __cpuinit usage from all hwmon files cpufreq: delete __cpuinit usage from all cpufreq files clocksource+irqchip: delete __cpuinit usage from all related files x86: delete __cpuinit usage from all x86 files score: delete __cpuinit usage from all score files xtensa: delete __cpuinit usage from all xtensa files openrisc: delete __cpuinit usage from all openrisc files m32r: delete __cpuinit usage from all m32r files hexagon: delete __cpuinit usage from all hexagon files frv: delete __cpuinit usage from all frv files cris: delete __cpuinit usage from all cris files metag: delete __cpuinit usage from all metag files tile: delete __cpuinit usage from all tile files sh: delete __cpuinit usage from all sh files ...
2013-07-18ARM: at91/DT: at91sam9x5ek: fix USB host property to enable port CNicolas Ferre
Device Tree "num-ports" property of USB host node has to be set to maximum number of ports available. The possibility to activate a particular port is done by specifying the proper gpio configuration for its vbus. This patch fixes the USB host node by configuring the 3 ports available on the product and letting "port A" available for USB gadget usage. Reported-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Bo Shen <voice.shen@atmel.com>
2013-07-18s390/kdump: Allow copy_oldmem_page() copy to virtual memoryMichael Holzheu
The kdump mmap patch series (git commit 83086978c63afd7c73e1c) changed the requirements for copy_oldmem_page(). Now this function is used for copying to virtual memory. So implement vmalloc support for the s390 version of copy_oldmem_page(). Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-07-18s390/bpf,jit: add pkt_type supportHeiko Carstens
s390 version of 3b58908a "x86: bpf_jit_comp: add pkt_type support". Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2013-07-18s390/bpf,jit: address randomize and write protect jit codeHeiko Carstens
This is the s390 variant of 314beb9b "x86: bpf_jit_comp: secure bpf jit against spraying attacks". With this change the whole jit code and literal pool will be write protected after creation. In addition the start address of the jit code won't be always on a page boundary anymore. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-07-18s390/bpf,jit: use generic jit dumperHeiko Carstens
This is the s390 backend of 79617801 "filter: bpf_jit_comp: refactor and unify BPF JIT image dump output". Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-07-18s390/bpf,jit: call module_free() from any contextHeiko Carstens
The workqueue workaround is no longer needed. Same as 5199dfe531 "sparc: bpf_jit_comp: can call module_free() from any context". Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-07-18KVM: nVMX: Set segment infomation of L1 when L2 exitsArthur Chunqi Li
When L2 exits to L1, segment infomations of L1 are not set correctly. According to Intel SDM 27.5.2(Loading Host Segment and Descriptor Table Registers), segment base/limit/access right of L1 should be set to some designed value when L2 exits to L1. This patch fixes this. Signed-off-by: Arthur Chunqi Li <yzt356@gmail.com> Reviewed-by: Gleb Natapov <gnatapov@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-18remove sched notifier for cross-cpu migrationsMarcelo Tosatti
Linux as a guest on KVM hypervisor, the only user of the pvclock vsyscall interface, does not require notification on task migration because: 1. cpu ID number maps 1:1 to per-CPU pvclock time info. 2. per-CPU pvclock time info is updated if the underlying CPU changes. 3. that version is increased whenever underlying CPU changes. Which is sufficient to guarantee nanoseconds counter is calculated properly. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-07-18KVM: nVMX: Fix read/write to MSR_IA32_FEATURE_CONTROLNadav Har'El
Fix read/write to IA32_FEATURE_CONTROL MSR in nested environment. This patch simulate this MSR in nested_vmx and the default value is 0x0. BIOS should set it to 0x5 before VMXON. After setting the lock bit, write to it will cause #GP(0). Another QEMU patch is also needed to handle emulation of reset and migration. Reset to vCPU should clear this MSR and migration should reserve value of it. This patch is based on Nadav's previous commit. http://permalink.gmane.org/gmane.comp.emulators.kvm.devel/88478 Signed-off-by: Nadav Har'El <nyh@math.technion.ac.il> Signed-off-by: Arthur Chunqi Li <yzt356@gmail.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-07-18KVM: x86: Drop useless castMathias Krause
Void pointers don't need no casting, drop it. Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-07-18KVM: VMX: Use proper types to access const arraysMathias Krause
Use a const pointer type instead of casting away the const qualifier from const arrays. Keep the pointer array on the stack, nonetheless. Making it static just increases the object size. Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-07-18KVM: nVMX: Set success rflags when emulate VMXON/VMXOFF in nested virtArthur Chunqi Li
Set rflags after successfully emulateing VMXON/VMXOFF in VMX. Signed-off-by: Arthur Chunqi Li <yzt356@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-18KVM: nVMX: Change location of 3 functions in vmx.cArthur Chunqi Li
Move nested_vmx_succeed/nested_vmx_failInvalid/nested_vmx_failValid ahead of handle_vmon to eliminate double declaration in the same file Signed-off-by: Arthur Chunqi Li <yzt356@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-18KVM: x86: Avoid zapping mmio sptes twice for generation wraparoundTakuya Yoshikawa
Now that kvm_arch_memslots_updated() catches every increment of the memslots->generation, checking if the mmio generation has reached its maximum value is enough. Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-18KVM: Introduce kvm_arch_memslots_updated()Takuya Yoshikawa
This is called right after the memslots is updated, i.e. when the result of update_memslots() gets installed in install_new_memslots(). Since the memslots needs to be updated twice when we delete or move a memslot, kvm_arch_commit_memory_region() does not correspond to this exactly. In the following patch, x86 will use this new API to check if the mmio generation has reached its maximum value, in which case mmio sptes need to be flushed out. Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Acked-by: Alexander Graf <agraf@suse.de> Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-18KVM: s390: use cookies for ioeventfdCornelia Huck
Make use of cookies for the virtio ccw notification hypercall to speed up lookup of devices on the io bus. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> [Small fix to a comment. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-18KVM: MMU: avoid fast page fault fixing mmio page faultXiao Guangrong
Currently, fast page fault incorrectly tries to fix mmio page fault when the generation number is invalid (spte.gen != kvm.gen). It then returns to guest to retry the fault since it sees the last spte is nonpresent. This causes an infinite loop. Since fast page fault only works for direct mmu, the issue exists when 1) tdp is enabled. It is only triggered only on AMD host since on Intel host the mmio page fault is recognized as ept-misconfig whose handler call fault-page path with error_code = 0 2) guest paging is disabled. Under this case, the issue is hardly discovered since paging disable is short-lived and the sptes will be invalid after memslot changed for 150 times Fix it by filtering out MMIO page faults in page_fault_can_be_fast. Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-17MIPS: Delete dead invocation of exception_exit().Ralf Baechle
panic() doesn't return so this call was useless. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reported-by: Alexander Sverdlin <alexander.sverdlin@nsn.com>
2013-07-16x86: Make jump_label use int3-based patchingJiri Kosina
Make jump labels use text_poke_bp() for text patching instead of text_poke_smp(), avoiding the need for stop_machine(). Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1307121120250.29788@pobox.suse.cz Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-07-16x86: Introduce int3 (breakpoint)-based instruction patchingJiri Kosina
Introduce a method for run-time instruction patching on a live SMP kernel based on int3 breakpoint, completely avoiding the need for stop_machine(). The way this is achieved: - add a int3 trap to the address that will be patched - sync cores - update all but the first byte of the patched range - sync cores - replace the first byte (int3) by the first byte of replacing opcode - sync cores According to http://lkml.indiana.edu/hypermail/linux/kernel/1001.1/01530.html synchronization after replacing "all but first" instructions should not be necessary (on Intel hardware), as the syncing after the subsequent patching of the first byte provides enough safety. But there's not only Intel HW out there, and we'd rather be on a safe side. If any CPU instruction execution would collide with the patching, it'd be trapped by the int3 breakpoint and redirected to the provided "handler" (which would typically mean just skipping over the patched region, acting as "nop" has been there, in case we are doing nop -> jump and jump -> nop transitions). Ftrace has been using this very technique since 08d636b ("ftrace/x86: Have arch x86_64 use breakpoints instead of stop machine") for ages already, and jump labels are another obvious potential user of this. Based on activities of Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> a few years ago. Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1307121102440.29788@pobox.suse.cz Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-07-16x86, bitops: Change bitops to be native operand sizeH. Peter Anvin
Change the bitops operation to be naturally "long", i.e. 63 bits on the 64-bit kernel. Additional bugs are likely to crop up in the future. We already have bugs which machines with > 16 TiB of memory in a single node, as can happen if memory is interleaved. The x86 bitop operations take a signed index, so using an unsigned type is not an option. Jim Kukunas measured the effect of this patch on kernel size: it adds 2779 bytes to the allyesconfig kernel. Some of that probably could be elided by replacing the inline functions with macros which select the 32-bit type if the index is a 32-bit value, something like: In that case we could also use "Jr" constraints for the 64-bit version. However, this would more than double the amount of code for a relatively small gain. Note that we can't use ilog2() for _BITOPS_LONG_SHIFT, as that causes a recursive header inclusion problem. The change to constant_test_bit() should both generate better code and give correct result for negative bit indicies. As previously written the compiler had to generate extra code to create the proper wrong result for negative values. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Jim Kukunas <james.t.kukunas@intel.com> Link: http://lkml.kernel.org/n/tip-z61ofiwe90xeyb461o72h8ya@git.kernel.org
2013-07-16x86: Make sure IDT is page alignedKees Cook
Since the IDT is referenced from a fixmap, make sure it is page aligned. Merge with 32-bit one, since it was already aligned to deal with F00F bug. Since bss is cleared before IDT setup, it can live there. This also moves the other *_idt_table variables into common locations. This avoids the risk of the IDT ever being moved in the bss and having the mapping be offset, resulting in calling incorrect handlers. In the current upstream kernel this is not a manifested bug, but heavily patched kernels (such as those using the PaX patch series) did encounter this bug. The tables other than idt_table technically do not need to be page aligned, at least not at the current time, but using a common declaration avoids mistakes. On 64 bits the table is exactly one page long, anyway. Signed-off-by: Kees Cook <keescook@chromium.org> Link: http://lkml.kernel.org/r/20130716183441.GA14232@www.outflux.net Reported-by: PaX Team <pageexec@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-10-01 11:48:24 +0000