summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2012-02-02ARM: 7308/1: vfp: flush thread hwstate before copying ptrace registersWill Deacon
If we are context switched whilst copying into a thread's vfp_hard_struct then the partial copy may be corrupted by the VFP context switching code (see "ARM: vfp: flush thread hwstate before restoring context from sigframe"). This patch updates the ptrace VFP set code so that the thread state is flushed before the copy, therefore disabling VFP and preventing corruption from occurring. Cc: stable <stable@vger.kernel.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-02ARM: 7307/1: vfp: fix ptrace regset modification raceDave Martin
In a preemptible kernel, vfp_set() can be preempted, causing the hardware VFP context to be switched while the thread vfp state is being read and modified. This leads to a race condition which can cause the thread vfp state to become corrupted if lazy VFP context save occurs due to preemption in between the time thread->vfpstate is read and the time the modified state is written back. This may occur if preemption occurs during the execution of a ptrace() call which modifies the VFP register state of a thread. Such instances should be very rare in most realistic scenarios -- none has been reported, so far as I am aware. Only uniprocessor systems should be affected, since VFP context save is not currently lazy in SMP kernels. The problem was introduced by my earlier patch migrating to use regsets to implement ptrace. This patch does a vfp_sync_hwstate() before reading thread->vfpstate, to make sure that the thread's VFP state is not live in the hardware registers while the registers are modified. Thanks to Will Deacon for spotting this. Cc: stable <stable@vger.kernel.org> Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-02ARM: 7306/1: vfp: flush thread hwstate before restoring context from sigframeWill Deacon
Following execution of a signal handler, we currently restore the VFP context from the ucontext in the signal frame. This involves copying from the user stack into the current thread's vfp_hard_struct and then flushing the new data out to the hardware registers. This is problematic when using a preemptible kernel because we could be context switched whilst updating the vfp_hard_struct. If the current thread has made use of VFP since the last context switch, the VFP notifier will copy from the hardware registers into the vfp_hard_struct, overwriting any data that had been partially copied by the signal code. Disabling preemption across copy_from_user calls is a terrible idea, so instead we move the VFP thread flush *before* we update the vfp_hard_struct. Since the flushing is performed lazily, this has the effect of disabling VFP and clearing the CPU's VFP state pointer, therefore preventing the thread from being updated with stale data on the next context switch. Cc: stable <stable@vger.kernel.org> Tested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-02Revert "ARM: 7304/1: ioremap: fix boundary check when reusing static mapping"Russell King
This reverts commit 3c424f359898aff48c3d5bed608ac706f8a528c3. Joachim Eastwood reports: | "ARM: 7304/1: ioremap: fix boundary check when reusing static mapping" | Commit: 3c424f359898aff48c3d5bed608ac706f8a528c3 in Linus master | | Breaks booting on my custom AT91RM9200 board. | There isn't any error messages or anything that indicates what goes | wrong it just stops after; Uncompressing Linux... done, booting the | kernel. | | Reverting it makes my board boot again. and further debugging reveals: ioremap: pfn=fffff phys=fffff000 offset=400 size=1000 ioremap: area c3ffdfc0: phys_addr=200000 pfn=200 size=4000 ioremap: found: addr fef74000 => fed73000 => fed73400 Clearly, an area for pfn 0x200, 16K can't ever satisfy a request for pfn 0xfffff. This happens because the changed if statement becomes: if (0x00200 > 0xfffff || 0xfffff000 + 0x400 + 0x1000-1 > 0x00200000 + 0x4000-1) and therefore: if (0x00200 > 0xfffff || 0x000003ff > 0x00203fff) The if condition fails, and so we _believe_ that the SRAM mapping fits our request. Clearly that's totally bogus. Moreover, the original premise of the 'fix' patch was wrong: | The condition checking boundaries of the requested and existing | mappings didn't take in-page offset into consideration though, | which lead to obscure and hard to debug problems when requested | mapping crossed end of the static one. as the code immediately above this loop does: size = PAGE_ALIGN(offset + size); so 'size' already contains the requested offset into the page. So, revert the broken 'fix'. Acked-by: Nicolas Pitre <nico@linaro.org>
2012-02-02lib: Fix multiple definitions of clz_tabDavid Miller
Both sparc 32-bit's software divide assembler and MPILIB provide clz_tab[] with identical contents. Break it out into a seperate object file and select it when SPARC32 or MPILIB is set. Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: James Morris <jmorris@namei.org>
2012-02-01ARM: mach-shmobile: both USB DMAC instances on sh7372 are slave-onlyGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-01KVM: do not #GP on perf MSR writes when vPMU is disabledGleb Natapov
Return to behaviour perf MSR had before introducing vPMU in case vPMU is disabled. Some guests access those registers unconditionally and do not expect it to fail. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-02-01KVM: x86: fix missing checks in syscall emulationStephan Bärwolf
On hosts without this patch, 32bit guests will crash (and 64bit guests may behave in a wrong way) for example by simply executing following nasm-demo-application: [bits 32] global _start SECTION .text _start: syscall (I tested it with winxp and linux - both always crashed) Disassembly of section .text: 00000000 <_start>: 0: 0f 05 syscall The reason seems a missing "invalid opcode"-trap (int6) for the syscall opcode "0f05", which is not available on Intel CPUs within non-longmodes, as also on some AMD CPUs within legacy-mode. (depending on CPU vendor, MSR_EFER and cpuid) Because previous mentioned OSs may not engage corresponding syscall target-registers (STAR, LSTAR, CSTAR), they remain NULL and (non trapping) syscalls are leading to multiple faults and finally crashs. Depending on the architecture (AMD or Intel) pretended by guests, various checks according to vendor's documentation are implemented to overcome the current issue and behave like the CPUs physical counterparts. [mtosatti: cleanup/beautify code] Signed-off-by: Stephan Baerwolf <stephan.baerwolf@tu-ilmenau.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-02-01KVM: x86: extend "struct x86_emulate_ops" with "get_cpuid"Stephan Bärwolf
In order to be able to proceed checks on CPU-specific properties within the emulator, function "get_cpuid" is introduced. With "get_cpuid" it is possible to virtually call the guests "cpuid"-opcode without changing the VM's context. [mtosatti: cleanup/beautify code] Signed-off-by: Stephan Baerwolf <stephan.baerwolf@tu-ilmenau.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-01-31sh: use the the PCI channels's io_map_baseMichael S. Tsirkin
commit 43db595e8b5d78ce5ad2feab719814a76e3ad2e5 (sh: switch to GENERIC_PCI_IOMAP) failed to take into account the PCI channels's io_map_base for mapping IO BARs. This also caused a new warning on sh. Fix this, without re-introducing code duplication, by setting NO_GENERIC_PCI_IOPORT_MAP and supplying a sh-specific __pci_ioport_map. Reported-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-01-31mips: use the the PCI controller's io_map_baseMichael S. Tsirkin
commit eab90291d35438bcebf7c3dc85be66d0f24e3002 (mips: switch to GENERIC_PCI_IOMAP) failed to take into account the PCI controller's io_map_base for mapping IO BARs. This also caused a new warning on mips. Fix this, without re-introducing code duplication, by setting NO_GENERIC_PCI_IOPORT_MAP and supplying a mips-specific __pci_ioport_map. Reported-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-01-31Merge branch 'perf/urgent' into perf/coreIngo Molnar
We cherry-picked 3 commits into perf/urgent, merge them back to allow conflict-free work on those files. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-31Revert "microblaze: Add topology init"Michal Simek
This reverts commit d761f0c521868e59cd0bc59159cbdb4686fe210d. Patch: "cpu: Register a generic CPU device on architectures that currently do not" (sha1: 9f13a1fd452f11c18004ba2422a6384b424ec8a9) selects GENERIC_CPU_DEVICES for Microblaze which register cpu. My patch was done in the same time that's why cpu was registered twice which caused this warning log: ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xb0/0xdc() sysfs: cannot create duplicate filename '/devices/system/cpu/cpu0' Modules linked in: ... Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-01-31ARM: EXYNOS: Correct M-5MOLS sensor clock frequency on Universal C210 boardSylwester Nawrocki
In order to keep the sensor's master clock frequency in valid range when FIMC parent clock is xusbxti, the specified frequency must be exactly 24MHZ, otherwise it's being set to too low value due to rounding. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-01-31ARM: EXYNOS: Correct framebuffer window size on Nuri boardSylwester Nawrocki
The real LCD resolution on Nuri is 1024x600, not 1280x800. This change fixes the color distortion (green shadows) on half of the screen. Also increase framebuffer virtual size for display panning support. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-01-30ARM: devicetree: Add .dtb files to arch/arm/boot/.gitignoreDave Martin
Compiled device tree blobs shouldn't be committed in the kernel tree, so ideally git should ignore them. This patch will enable ignoring of any .dtb files which appear in arch/arm/boot/ Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-01-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: [S390] dasd: revalidate server for new pathgroup [S390] dasd: revert LCU optimization [S390] cleanup entry point definition
2012-01-30Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
* 'next' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: generic atomic64 support
2012-01-30x86/reboot: Remove VersaLogic Menlow reboot quirkMichael D Labriola
This commit removes the reboot quirk originally added by commit e19e074 ("x86: Fix reboot problem on VersaLogic Menlow boards"). Testing with a VersaLogic Ocelot (VL-EPMs-21a rev 1.00 w/ BIOS 6.5.102) revealed the following regarding the reboot hang problem: - v2.6.37 reboot=bios was needed. - v2.6.38-rc1: behavior changed, reboot=acpi is needed, reboot=kbd and reboot=bios results in system hang. - v2.6.38: VersaLogic patch (e19e074 "x86: Fix reboot problem on VersaLogic Menlow boards") was applied prior to v2.6.38-rc7. This patch sets a quirk for VersaLogic Menlow boards that forces the use of reboot=bios, which doesn't work anymore. - v3.2: It seems that commit 660e34c ("x86: Reorder reboot method preferences") changed the default reboot method to acpi prior to v3.0-rc1, which means the default behavior is appropriate for the Ocelot. No VersaLogic quirk is required. The Ocelot board used for testing can successfully reboot w/out having to pass any reboot= arguments for all 3 current versions of the BIOS. Signed-off-by: Michael D Labriola <michael.d.labriola@gmail.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Michael D Labriola <mlabriol@gdeb.com> Cc: Kushal Koolwal <kushalkoolwal@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/87vcnub9hu.fsf@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-30x86/reboot: Skip DMI checks if reboot set by userMichael D Labriola
Skip DMI checks for vendor specific reboot quirks if the user passed in a reboot= arg on the command line - we should never override user choices. Signed-off-by: Michael D Labriola <michael.d.labriola@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Michael D Labriola <mlabriol@gdeb.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/87wr8ab9od.fsf@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-29Merge branch 'fixes' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: arch/arm/mach-omap2/smartreflex.c: add missing iounmap ARM: OMAP2+: arch/arm/mach-omap2/devices.c: introduce missing kfree ARM: OMAP: fix MMC2 loopback clock handling ARM: OMAP: fix erroneous mmc2 clock change on mmc3 setup ARM: OMAP2+: GPMC: fix device size setup ARM: OMAP2+: timer: Fix crash due to wrong arg to __omap_dm_timer_read_counter ARM: OMAP3: hwmod data: register dss hwmods after dss_core ARM: OMAP2/3: PRM: fix missing plat/irqs.h build breakage ARM: OMAP2+: io: fix compilation breakage on 2420-only configs ARM: OMAP4: hwmod data: Add names for DMIC memory address space ARM: OMAP3: hwmod data: add SYSC_HAS_ENAWAKEUP for dispc ARM: OMAP2+: hwmod data: split omap2/3 dispc hwmod class ARM: OMAP2: fix regulator warnings ARM: OMAP2: fix omap3 touchbook kconfig warning i2c: OMAP: Fix OMAP1 build error
2012-01-29Merge branch 'fixes' of git://gitorious.org/linux-davinci/linux-davinci into ↵Olof Johansson
fixes * 'fixes' of git://gitorious.org/linux-davinci/linux-davinci: ARM: davinci: update mdio bus name ARM: davinci: DA850: remove non-existing pll1_sysclk4-7 clocks
2012-01-28Merge branch 'stable/for-linus-fixes-3.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/for-linus-fixes-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/granttable: Disable grant v2 for HVM domains. x86: xen: size struct xen_spinlock to always fit in arch_spinlock_t
2012-01-28Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm: (31 commits) ARM: 7304/1: ioremap: fix boundary check when reusing static mapping ARM: 7301/1: Rename the T() macro to TUSER() to avoid namespace conflicts ARM: 7299/1: ftrace: clear zero bit in reported IPs for Thumb-2 ARM: 7298/1: realview: fix mapping of MPCore private memory region PCMCIA: fix sa1111 oops on remove ARM: 7288/1: mach-sa1100: add missing module_init() call ARM: 7297/1: smp_twd: make sure timer is stopped before registering it ARM: 7296/1: proc-v7.S: remove HARVARD_CACHE preprocessor guards ARM: 7295/1: cortex-a7: move proc_info out of !CONFIG_ARM_LPAE block ARM: 7293/1: logical_cpu_map: decouple CPU mapping from SMP ARM: 7291/1: cache: assume 64-byte L1 cachelines for ARMv7 CPUs ARM: 7290/1: vmlinux.lds.S: align the exception fixup table to a 4-byte boundary ARM: 7289/1: vmlinux.lds.S: do not hardcode cacheline size as 32 bytes MFD: ucb1x00-ts: fix resume failure MFD: ucb1x00-core: fix gpiolib direction_output handling MFD: ucb1x00-core: fix missing restore of io output data on resume MFD: mcp-core: fix mcp_priv() to be more type safe MFD: mcp-core: fix complaints from the genirq layer Revert "ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp bus." Revert "ARM: sa1100: Refactor mcp-sa11x0 to use platform resources." ... Fix up conflict due to arch/arm/mach-mx5/Kconfig having been merged into mach-imx5 (commit 784a90c0a7d8: "ARM i.MX: Merge i.MX5 support into mach-imx"), but the ARM_L1_CACHE_SHIFT_6 entry was moved to be driven by the CPU_V7 logic from it in the old location in rmk's branch (commit a092f2b15399: "ARM: 7291/1: cache: assume 64-byte L1 cachelines for ARMv7 CPUs").
2012-01-28Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc arm-soc fixes for 3.3-rc: AT91 needed reset fixes which resulted in some minor code refactoring, it also adds a feature-removal for one of their platforms for 3.4. The USB patches have been acked by Greg K-H. i.MX and ux500 both have some minor fixes, nothing controversial. * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arch/arm/mach-imx/mach-mx53_ard.c: add missing iounmap ARM: imx: iomux-v1.h: Fix build error due to __init annotation ARM: at91: Fix at91sam9g45 and at91cap9 reset ARM: at91: make rstc soc independent ARM: at91: introduce AT91_SAM9_ALT_RESET to select the at91sam9 alternative reset ARM: at91: merge at91cap9_ddrsdr.h in at91sam9_ddrsdr.h ARM: at91: fix cap9 ddrsdr register ARM/USB: at91/ohci-at91: rename vbus_pin_inverted to vbus_pin_active_low USB: at91: fix clk_get error handling ARM: at91: removal of CAP9 SoC family ARM: at91: fix at91rm9200 soc subtype handling mach-ux500: no MMC_CAP_SD_HIGHSPEED on Snowball mach-ux500: enable ARM errata 764369 mach-ux500: do not override outer.inv_all mach-ux500: musb: now musb is always in OTG mode ARM: imx6: add missing twd_clk for imx6q clock
2012-01-28x86/dumpstack: Remove unneeded check in dump_trace()Dan Carpenter
Smatch complains that we have some inconsistent NULL checking. If "task" were NULL then it would lead to a NULL dereference later. We can remove this test because earlier on in the function we have: if (!task) task = current; Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Clemens Ladisch <clemens@ladisch.de> Link: http://lkml.kernel.org/r/20120128105246.GA25092@elgon.mountain Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-27ARM: 7304/1: ioremap: fix boundary check when reusing static mappingPawel Moll
Since commit 576d2f2525612ecb5af029a76f21f22a3b82563d "ARM: add generic ioremap optimization by reusing static mappings" ioremap() is trying to reuse existing static mapping when possible. The condition checking boundaries of the requested and existing mappings didn't take in-page offset into consideration though, which lead to obscure and hard to debug problems when requested mapping crossed end of the static one. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-27ARM: davinci: update mdio bus nameSekhar Nori
Commit 5a05a8200a4359ef2bfe9094c137dee35cfdd516 ("davinci_emac: use an unique MDIO bus name") introduced during the v3.3 merge window updated the davinci mdio bus name to make it unique. Update the bus name in board files which use DaVinci MDIO bus to match the new name. Without this PHY is not detected with error like: PHY 0:01 not found net eth0: could not connect to phy 0:01 Tested on DM365 and DA850 EVMs. Cc: Florian Fainelli <florian@openwrt.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-01-27Merge commit 'v3.3-rc1' into stable/for-linus-fixes-3.3Konrad Rzeszutek Wilk
* commit 'v3.3-rc1': (9775 commits) Linux 3.3-rc1 x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits qnx4: don't leak ->BitMap on late failure exits qnx4: reduce the insane nesting in qnx4_checkroot() qnx4: di_fname is an array, for crying out loud... KEYS: Permit key_serial() to be called with a const key pointer keys: fix user_defined key sparse messages ima: fix cred sparse warning uml: fix compile for x86-64 MPILIB: Add a missing ENOMEM check tpm: fix (ACPI S3) suspend regression nvme: fix merge error due to change of 'make_request_fn' fn type xen: using EXPORT_SYMBOL requires including export.h gpio: tps65910: Use correct offset for gpio initialization acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec intel_idle: Split up and provide per CPU initialization func ACPI processor: Remove unneeded variable passed by acpi_processor_hotadd_init V2 tg3: Fix single-vector MSI-X code openvswitch: Fix multipart datapath dumps. ipv6: fix per device IP snmp counters ...
2012-01-27Merge branch 'perf/fast' into perf/coreIngo Molnar
Merge reason: Lets ready it for v3.4 Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-27Merge branches 'sh/urgent' and 'sh/platform-updates' into sh-latestPaul Mundt
2012-01-26Merge branch 'imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6 into ↵Olof Johansson
fixes * 'imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6: arch/arm/mach-imx/mach-mx53_ard.c: add missing iounmap ARM: imx: iomux-v1.h: Fix build error due to __init annotation
2012-01-26Merge branch 'fixes-for-arm-soc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into fixes * 'fixes-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: mach-ux500: no MMC_CAP_SD_HIGHSPEED on Snowball mach-ux500: enable ARM errata 764369 mach-ux500: do not override outer.inv_all mach-ux500: musb: now musb is always in OTG mode
2012-01-26Merge branch 'imx6/fixes' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson
into fixes * 'imx6/fixes' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: imx6: add missing twd_clk for imx6q clock
2012-01-27ARM: SAMSUNG: Fix missing api-change from subsys_interface changeHeiko Stuebner
Commit 4a858cfc9a (arm: convert sysdev_class to a regular subsystem) converted the samsung sysdevs into subsys_interface instances. While the original add-function only had a (struct sys_device *) parameter, the dev_add from subsys_interface needs (struct device *, struct subsys_interface *) leading to "initialized from incompatible pointer type" warnings. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-01-27ARM: EXYNOS: Fix "warning: initialization from incompatible pointer type"Jonghwan Choi
Fix the wrong function prototype. Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-01-27sh: add platform_device for SPI1 in setup-sh7757Shimoda, Yoshihiro
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-27sh: modify resource for SPI0 in setup-sh7757Shimoda, Yoshihiro
The new spi-sh driver decodes the IORESOURCE_MEM_TYPE_MASK. So, the resource needs the IORESOURCE_MEM_32BIT. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-27ARM: S5PV210: Fix the name of exynos4_clk_hdmiphy_ctrl() for S5PV210Kukjin Kim
Should be s5pv210_clk_hdmiphy_ctrl() in mach-s5pv210/. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-01-27sh: se7724: fix compile breakageGuennadi Liakhovetski
Fix compilation breakage arch/sh/boards/mach-se/7724/setup.c:182: error: 'V4L2_PIX_FMT_RGB565' undeclared here (not in a function) make[3]: *** [arch/sh/boards/mach-se/7724/setup.o] Error 1 caused by commit "fbdev: sh_mobile_lcdc: Support FOURCC-based format API" Also add other missing headers, even if compilation currently succeeds because of their indirect inclusion via other headers. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-27ARM: EXYNOS: Remove build warning without enabling PMKukjin Kim
Fixed following build warning with exynos4_defconfig. arch/arm/mach-exynos/clock.c:33: warning: 'exynos4_clock_save' defined but not used arch/arm/mach-exynos/clock-exynos4210.c:35: warning: 'exynos4210_clock_save' defined but not used arch/arm/mach-exynos/clock-exynos4212.c:35: warning: 'exynos4212_clock_save' defined but not used Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-01-27ARM: SAMSUNG: Fix platform data setup for I2C adapter 0Sylwester Nawrocki
The common static default_i2c_data structure gets bus_num set by each s3c_i2c?_set_platdata() call, except for s3c_i2c0_set_platdata(). Thus if for instance s3c_i2c1_set_platdata() is called prior to s3c_i2c0_set_platdata() the I2C0 controller has bus_num set to wrong value of 1, i.e. the one from previous set_platdata call. Fix this by also setting bus_num for I2C0. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-01-27ARM: EXYNOS: fix non-SMP builds for EXYNOS4Marek Szyprowski
This patch fixes the following build issue, which happens only if SMP has been disabled: arch/arm/mach-exynos/built-in.o: In function `exynos4_pm_resume': arch/arm/mach-exynos/pm.c:387: undefined reference to `scu_enable' Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-01-27ARM: S3C6410: Use device names for both I2C clocksMark Brown
When the S3C64xx CPUs were converted to clkdev mappings were added for the I2C controllers on them. On S3C6410 a device name is specified for I2C controller 1 but not for controller 0 which makes the code less robust as we'll falsely return the clock for controller 0 if there's an error in the request for controller 1. Improve things by registering a device name for controller 0 as well. Due to the fact that we change the numbering for controller 0 depending on if we've registered controller 1 this requires an ifdef to choose the name. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-01-27ARM: S3C64XX: Make s3c64xx_init_uarts() staticMark Brown
Now that it's in common.c it's not used in multiple source files. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-01-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc32: forced setting of mode of sun4m per-cpu timers
2012-01-26Merge branch 'omap_fixes_a_3.3rc' of git://git.pwsan.com/linux-2.6 into fixesTony Lindgren
2012-01-26ARM: OMAP2+: arch/arm/mach-omap2/smartreflex.c: add missing iounmapJulia Lawall
Add missing iounmap in error handling code, in a case where the function already preforms iounmap on some other execution path. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e; statement S,S1; int ret; @@ e = \(ioremap\|ioremap_nocache\)(...) ... when != iounmap(e) if (<+...e...+>) S ... when any when != iounmap(e) *if (...) { ... when != iounmap(e) return ...; } ... when any iounmap(e); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-01-26ARM: OMAP2+: arch/arm/mach-omap2/devices.c: introduce missing kfreeJulia Lawall
pdata needs to be freed before leaving the function in an error case. A simplified version of the semantic match that finds the problem is as follows: (http://coccinelle.lip6.fr) // <smpl> @r exists@ local idexpression x; statement S; identifier f1; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } x->f1 ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-01-26ARM: OMAP: fix MMC2 loopback clock handlingGrazvydas Ignotas
Currently MMC2 setup code can only enable loopback clock and relies on reset value for boards that need to have it disabled. This causes a problem with certain bootloaders that always enable that clock, resulting with unwanted bootloader dependencies. Fix this by making it disable the clock if board data says so. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit (git 2.34.1) at 2025-09-12 13:02:46 +0000