| Age | Commit message (Collapse) | Author |
|---|
|
Memory events (mem-loads and mem-stores) currently use the threshold
event selection as issue to finish. Power10 supports issue to complete
as part of thresholding which is more appropriate for mem-loads and
mem-stores. Hence fix the event code for memory events to use issue
to complete.
Fixes: a64e697cef23 ("powerpc/perf: power10 Performance Monitoring support")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1614840015-1535-1-git-send-email-atrajeev@linux.vnet.ibm.com
|
|
Sampled Instruction Event Register (SIER) field [46:48] identifies the
sampled instruction type. ISA v3.1 says value of 0b111 for this field as
reserved, but in POWER10 it denotes LARX/STCX type which will hopefully
be fixed in ISA v3.1 update.
Patch fixes the functions to handle type value 7 for CPU_FTR_ARCH_31.
Fixes: a64e697cef23 ("powerpc/perf: power10 Performance Monitoring support")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Avoid reading mmcra until necessary, use early return to deindent if block]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1614858937-1485-1-git-send-email-atrajeev@linux.vnet.ibm.com
|
|
irq_create_strict_mappings() is a poor way to allow the use of
a linear IRQ domain as a legacy one. Let's be upfront about
it and use a legacy domain when appropriate.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210406093557.1073423-3-maz@kernel.org
|
|
GIC CPU interfaces versions predating GIC v4.1 were not built to
accommodate vINTID within the vSGI range; as reported in the GIC
specifications (8.2 "Changes to the CPU interface"), it is
CONSTRAINED UNPREDICTABLE to deliver a vSGI to a PE with
ID_AA64PFR0_EL1.GIC < b0011.
Check the GIC CPUIF version by reading the SYS_ID_AA64_PFR0_EL1.
Disable vSGIs if a CPUIF version < 4.1 is detected to prevent using
vSGIs on systems where they may misbehave.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210317100719.3331-2-lorenzo.pieralisi@arm.com
|
|
The only stepping of Broadwell Xeon parts is stepping 1. Fix the
relevant isolation_ucodes[] entry, which previously enumerated
stepping 2.
Although the original commit was characterized as an optimization, it
is also a workaround for a correctness issue.
If a PMI arrives between kvm's call to perf_guest_get_msrs() and the
subsequent VM-entry, a stale value for the IA32_PEBS_ENABLE MSR may be
restored at the next VM-exit. This is because, unbeknownst to kvm, PMI
throttling may clear bits in the IA32_PEBS_ENABLE MSR. CPUs with "PEBS
isolation" don't suffer from this issue, because perf_guest_get_msrs()
doesn't report the IA32_PEBS_ENABLE value.
Fixes: 9b545c04abd4f ("perf/x86/kvm: Avoid unnecessary work in guest filtering")
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Peter Shier <pshier@google.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/20210422001834.1748319-1-jmattson@google.com
|
|
[ 0.000000] ioremap() called early from find_legacy_serial_ports+0x3cc/0x474. Use early_ioremap() instead
find_legacy_serial_ports() is called early from setup_arch(), before
paging_init(). vmalloc is not available yet, ioremap shouldn't be
used that early.
Use early_ioremap() and switch to a regular ioremap() later.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/103ed8ee9e5973c958ec1da2d0b0764f69395d01.1618925560.git.christophe.leroy@csgroup.eu
|
|
At the time being, the fixmap area is defined at the top of
the address space or just below KASAN.
This definition is not valid for PPC64.
For PPC64, use the top of the I/O space.
Because of circular dependencies, it is not possible to include
asm/fixmap.h in asm/book3s/64/pgtable.h , so define a fixed size
AREA at the top of the I/O space for fixmap and ensure during
build that the size is big enough.
Fixes: 265c3491c4bc ("powerpc: Add support for GENERIC_EARLY_IOREMAP")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0d51620eacf036d683d1a3c41328f69adb601dc0.1618925560.git.christophe.leroy@csgroup.eu
|
|
On a kernel config with ALTIVEC=y and PPC_FPU not set/enabled,
there are build errors:
drivers/cpufreq/pmac32-cpufreq.c:262:2: error: implicit declaration of function 'enable_kernel_fp' [-Werror,-Wimplicit-function-declaration]
enable_kernel_fp();
../arch/powerpc/lib/sstep.c: In function 'do_vec_load':
../arch/powerpc/lib/sstep.c:637:3: error: implicit declaration of function 'put_vr' [-Werror=implicit-function-declaration]
637 | put_vr(rn, &u.v);
| ^~~~~~
../arch/powerpc/lib/sstep.c: In function 'do_vec_store':
../arch/powerpc/lib/sstep.c:660:3: error: implicit declaration of function 'get_vr'; did you mean 'get_oc'? [-Werror=implicit-function-declaration]
660 | get_vr(rn, &u.v);
| ^~~~~~
In theory ALTIVEC is independent of PPC_FPU but in practice nobody
is going to build such a machine, so make ALTIVEC require PPC_FPU
by selecting it.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210421210647.20836-1-rdunlap@infradead.org
|
|
FA_DUMP (Firmware Assisted Dump) is a powerpc only feature that should
be enabled in our defconfig to get some build / test coverage.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210420042209.1641634-1-mpe@ellerman.id.au
|
|
opal_mpipl_query_tag() takes a pointer to a 64-bit value, which firmware
writes a value to. As OPAL is traditionally big endian this value will
be big endian.
This can be confirmed by looking at the implementation in skiboot:
static uint64_t opal_mpipl_query_tag(enum opal_mpipl_tags tag, __be64 *tag_val)
{
...
*tag_val = cpu_to_be64(opal_mpipl_tags[tag]);
return OPAL_SUCCESS;
}
Fix the declaration to annotate that the value is big endian.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210421125402.1955013-2-mpe@ellerman.id.au
|
|
Sparse says:
arch/powerpc/kernel/fadump.c:48:16: warning: symbol 'fadump_kobj' was not declared. Should it be static?
arch/powerpc/kernel/fadump.c:55:27: warning: symbol 'crash_mrange_info' was not declared. Should it be static?
arch/powerpc/kernel/fadump.c:61:27: warning: symbol 'reserved_mrange_info' was not declared. Should it be static?
arch/powerpc/kernel/fadump.c:83:12: warning: symbol 'fadump_cma_init' was not declared. Should it be static?
And indeed none of them are used outside this file, they can all be made
static. Also fadump_kobj needs to be moved inside the ifdef where it's
used.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210421125402.1955013-1-mpe@ellerman.id.au
|
|
Commit 941432d00768 ("arm64: dts: allwinner: Drop non-removable from
SoPine/LTS SD card") enabled the card detect GPIO for the SOPine module,
along the way with the Pine64-LTS, which share the same base .dtsi.
This was based on the observation that the Pine64-LTS has as "push-push"
SD card socket, and that the schematic mentions the card detect GPIO.
After having received two reports about failing SD card access with that
patch, some more research and polls on that subject revealed that there
are at least two different versions of the Pine64-LTS out there:
- On some boards (including mine) the card detect pin is "stuck" at
high, regardless of an microSD card being inserted or not.
- On other boards the card-detect is working, but is active-high, by
virtue of an explicit inverter circuit, as shown in the schematic.
To cover all versions of the board out there, and don't take any chances,
let's revert the introduction of the active-low CD GPIO, but let's use
the broken-cd property for the Pine64-LTS this time. That should avoid
regressions and should work for everyone, even allowing SD card changes
now.
The SOPine card detect has proven to be working, so let's keep that
GPIO in place.
Fixes: 941432d00768 ("arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD card")
Reported-by: Michael Weiser <michael.weiser@gmx.de>
Reported-by: Daniel Kulesz <kuleszdl@posteo.org>
Suggested-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Michael Weiser <michael.weiser@gmx.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210414104740.31497-1-andre.przywara@arm.com
|
|
Fix "fallthrough" warnings in microblaze memcpy/memset/memmove
library functions.
CC arch/microblaze/lib/memcpy.o
../arch/microblaze/lib/memcpy.c: In function 'memcpy':
../arch/microblaze/lib/memcpy.c:70:4: warning: this statement may fall through [-Wimplicit-fallthrough=]
70 | --c;
../arch/microblaze/lib/memcpy.c:71:3: note: here
71 | case 2:
../arch/microblaze/lib/memcpy.c:73:4: warning: this statement may fall through [-Wimplicit-fallthrough=]
73 | --c;
../arch/microblaze/lib/memcpy.c:74:3: note: here
74 | case 3:
../arch/microblaze/lib/memcpy.c:178:10: warning: this statement may fall through [-Wimplicit-fallthrough=]
178 | *dst++ = *src++;
../arch/microblaze/lib/memcpy.c:179:2: note: here
179 | case 2:
../arch/microblaze/lib/memcpy.c:180:10: warning: this statement may fall through [-Wimplicit-fallthrough=]
180 | *dst++ = *src++;
../arch/microblaze/lib/memcpy.c:181:2: note: here
181 | case 1:
CC arch/microblaze/lib/memset.o
../arch/microblaze/lib/memset.c: In function 'memset':
../arch/microblaze/lib/memset.c:71:4: warning: this statement may fall through [-Wimplicit-fallthrough=]
71 | --n;
../arch/microblaze/lib/memset.c:72:3: note: here
72 | case 2:
../arch/microblaze/lib/memset.c:74:4: warning: this statement may fall through [-Wimplicit-fallthrough=]
74 | --n;
../arch/microblaze/lib/memset.c:75:3: note: here
75 | case 3:
CC arch/microblaze/lib/memmove.o
../arch/microblaze/lib/memmove.c: In function 'memmove':
../arch/microblaze/lib/memmove.c:92:4: warning: this statement may fall through [-Wimplicit-fallthrough=]
92 | --c;
../arch/microblaze/lib/memmove.c:93:3: note: here
93 | case 2:
../arch/microblaze/lib/memmove.c:95:4: warning: this statement may fall through [-Wimplicit-fallthrough=]
95 | --c;
../arch/microblaze/lib/memmove.c:96:3: note: here
96 | case 1:
../arch/microblaze/lib/memmove.c:203:10: warning: this statement may fall through [-Wimplicit-fallthrough=]
203 | *--dst = *--src;
../arch/microblaze/lib/memmove.c:204:2: note: here
204 | case 3:
../arch/microblaze/lib/memmove.c:205:10: warning: this statement may fall through [-Wimplicit-fallthrough=]
205 | *--dst = *--src;
../arch/microblaze/lib/memmove.c:206:2: note: here
206 | case 2:
../arch/microblaze/lib/memmove.c:207:10: warning: this statement may fall through [-Wimplicit-fallthrough=]
207 | *--dst = *--src;
../arch/microblaze/lib/memmove.c:208:2: note: here
208 | case 1:
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Michal Simek <monstr@monstr.eu>
Link: https://lore.kernel.org/r/20210421022041.10689-1-rdunlap@infradead.org
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
|
check
Hibernation fails on a system in fips mode because md5 is used for the e820
integrity check and is not available. Use crc32 instead.
The check is intended to detect whether the E820 memory map provided
by the firmware after cold boot unexpectedly differs from the one that
was in use when the hibernation image was created. In this case, the
hibernation image cannot be restored, as it may cover memory regions
that are no longer available to the OS.
A non-cryptographic checksum such as CRC-32 is sufficient to detect such
inadvertent deviations.
Fixes: 62a03defeabd ("PM / hibernate: Verify the consistent of e820 memory map by md5 digest")
Reviewed-by: Eric Biggers <ebiggers@google.com>
Tested-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Chris von Recklinghausen <crecklin@redhat.com>
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When probe_kernel_read_inst() was created, there was no good place to
put it, so a file called lib/inst.c was dedicated for it.
Since then, probe_kernel_read_inst() has been renamed
copy_inst_from_kernel_nofault(). And mm/maccess.h didn't exist at that
time. Today, mm/maccess.h is related to copy_from_kernel_nofault().
Move copy_inst_from_kernel_nofault() into mm/maccess.c
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9655d8957313906b77b8db5700a0e33ce06f45e5.1618405715.git.christophe.leroy@csgroup.eu
|
|
When probe_kernel_read_inst() was created, it was to mimic
probe_kernel_read() function.
Since then, probe_kernel_read() has been renamed
copy_from_kernel_nofault().
Rename probe_kernel_read_inst() into copy_inst_from_kernel_nofault().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b783d1f7cdb8914992384a669a2af57051b6bdcf.1618405715.git.christophe.leroy@csgroup.eu
|
|
We have two independant versions of probe_kernel_read_inst(), one for
PPC32 and one for PPC64.
The PPC32 is identical to the first part of the PPC64 version.
The remaining part of PPC64 version is not relevant for PPC32, but
not contradictory, so we can easily have a common function with
the PPC64 part opted out via a IS_ENABLED(CONFIG_PPC64).
The only need is to add a version of ppc_inst_prefix() for PPC32.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f7b9dfddef3b3760182c7e5466356c121a293dc9.1618405715.git.christophe.leroy@csgroup.eu
|
|
Its name comes from former probe_user_read() function.
That function is now called copy_from_user_nofault().
probe_user_read_inst() uses copy_from_user_nofault() to read only
a few bytes. It is suboptimal.
It does the same as get_user_inst() but in addition disables
page faults.
But on the other hand, it is not used for the time being. So remove it
for now. If one day it is really needed, we can give it a new name
more in line with today's naming, and implement it using get_user_inst()
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5f6f82572242a59bfee1e19a71194d8f7ef5fca4.1618405715.git.christophe.leroy@csgroup.eu
|
|
If the target of a function call is within 32 Mbytes distance, use a
standard function call with 'bl' instead of the 'lis/ori/mtlr/blrl'
sequence.
In the first pass, no memory has been allocated yet and the code
position is not known yet (image pointer is NULL). This pass is there
to calculate the amount of memory to allocate for the EBPF code, so
assume the 4 instructions sequence is required, so that enough memory
is allocated.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/74944a1e3e5cfecc141e440a6ccd37920e186b70.1618227846.git.christophe.leroy@csgroup.eu
|
|
Re-implement BPF_ALU64 | BPF_{LSH/RSH/ARSH} | BPF_X with branchless
implementation copied from misc_32.S.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/03167350b05b2fe8b741e53363ee37709d0f878d.1618227846.git.christophe.leroy@csgroup.eu
|
|
Replace <<== by <<=
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/34d12a4f75cb8b53a925fada5e7ddddd3b145203.1618227846.git.christophe.leroy@csgroup.eu
|
|
wrtspr() is a function to write an arbitrary value in a special
register. It is used on 8xx to write to SPRN_NRI, SPRN_EID and
SPRN_EIE. Writing any value to one of those will play with MSR EE
and MSR RI regardless of that value.
r0 is used many places in the generated code and using r0 for
that creates an unnecessary dependency of this instruction with
preceding ones using r0 in a few places in vmlinux.
r2 is most likely the most stable register as it contains the
pointer to 'current'.
Using r2 instead of r0 avoids that unnecessary dependency.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/69f9968f4b592fefda55227f0f7430ea612cc950.1611299687.git.christophe.leroy@csgroup.eu
|
|
When we hit an UE while using machine check safe copy routines,
ignore_event flag is set and the event is ignored by mce handler,
And the flag is also saved for defered handling and printing of
mce event information, But as of now saving of this flag is done
on checking if the effective address is provided or physical address
is calculated, which is not right.
Save ignore_event flag regardless of whether the effective address is
provided or physical address is calculated.
Without this change following log is seen, when the event is to be
ignored.
[ 512.971365] MCE: CPU1: machine check (Severe) UE Load/Store [Recovered]
[ 512.971509] MCE: CPU1: NIP: [c0000000000b67c0] memcpy+0x40/0x90
[ 512.971655] MCE: CPU1: Initiator CPU
[ 512.971739] MCE: CPU1: Unknown
[ 512.972209] MCE: CPU1: machine check (Severe) UE Load/Store [Recovered]
[ 512.972334] MCE: CPU1: NIP: [c0000000000b6808] memcpy+0x88/0x90
[ 512.972456] MCE: CPU1: Initiator CPU
[ 512.972534] MCE: CPU1: Unknown
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Reviewed-by: Santosh Sivaraj <santosh@fossix.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210407045816.352276-1-ganeshgr@linux.ibm.com
|
|
For that, create a 32 bits version of patch_imm64_load_insns()
and create a patch_imm_load_insns() which calls
patch_imm32_load_insns() on PPC32 and patch_imm64_load_insns()
on PPC64.
Adapt optprobes_head.S for PPC32. Use PPC_LL/PPC_STL macros instead
of raw ld/std, opt out things linked to paca and use stmw/lmw to
save/restore registers.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bad58c66859b2a475c0ad516b53164ae3b4853cd.1618927318.git.christophe.leroy@csgroup.eu
|
|
In order to simplify use on PPC32, change ppc_inst_as_u64()
into ppc_inst_as_ulong() that returns the 32 bits instruction
on PPC32.
Will be used when porting OPTPROBES to PPC32.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/22cadf29620664b600b82026d2a72b8b23351777.1618927318.git.christophe.leroy@csgroup.eu
|
|
This patch makes use of trap types in irq.c
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f7f8c9f98c33eaea316755c7fef150d1d77e047d.1618847273.git.christophe.leroy@csgroup.eu
|
|
This patch makes use of trap types in head_book3s_32.S
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bd80ace67757f489fc4ecdb76dd1a71511daba94.1618847273.git.christophe.leroy@csgroup.eu
|
|
This patch makes use of trap types in head_8xx.S
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e1147287bf6f2fb0693048fe8db0298c7870e419.1618847273.git.christophe.leroy@csgroup.eu
|
|
As of today, if the DDW is big enough to fit (1 << MAX_PHYSMEM_BITS)
it's possible to use direct DMA mapping even with pmem region.
But, if that happens, the window size (len) is set to (MAX_PHYSMEM_BITS
- page_shift) instead of MAX_PHYSMEM_BITS, causing a pagesize times
smaller DDW to be created, being insufficient for correct usage.
Fix this so the correct window size is used in this case.
Fixes: bf6e2d562bbc4 ("powerpc/dma: Fallback to dma_ops when persistent memory present")
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210420045404.438735-1-leobras.c@gmail.com
|
|
There may be a kernel panic on the Haswell server and the Broadwell
server, if the snbep_pci2phy_map_init() return error.
The uncore_extra_pci_dev[HSWEP_PCI_PCU_3] is used in the cpu_init() to
detect the existence of the SBOX, which is a MSR type of PMON unit.
The uncore_extra_pci_dev is allocated in the uncore_pci_init(). If the
snbep_pci2phy_map_init() returns error, perf doesn't initialize the
PCI type of the PMON units, so the uncore_extra_pci_dev will not be
allocated. But perf may continue initializing the MSR type of PMON
units. A null dereference kernel panic will be triggered.
The sockets in a Haswell server or a Broadwell server are identical.
Only need to detect the existence of the SBOX once.
Current perf probes all available PCU devices and stores them into the
uncore_extra_pci_dev. It's unnecessary.
Use the pci_get_device() to replace the uncore_extra_pci_dev. Only
detect the existence of the SBOX on the first available PCU device once.
Factor out hswep_has_limit_sbox(), since the Haswell server and the
Broadwell server uses the same way to detect the existence of the SBOX.
Add some macros to replace the magic number.
Fixes: 5306c31c5733 ("perf/x86/uncore/hsw-ep: Handle systems with only two SBOXes")
Reported-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lkml.kernel.org/r/1618521764-100923-1-git-send-email-kan.liang@linux.intel.com
|
|
from arch/mips/kernel/head.S we know that use a0~a3 for fw_arg0~fw_arg3
there is some code from head.S:
LONG_S a0, fw_arg0 # firmware arguments
LONG_S a1, fw_arg1
LONG_S a2, fw_arg2
LONG_S a3, fw_arg3
Signed-off-by: xiaochuan mao <maoxiaochuan@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
We already check the high part of the divident against zero to avoid the
costly DIVU instruction in that case, needed to reduce the high part of
the divident, so we may well check against the divisor instead and set
the high part of the quotient to zero right away. We need to treat the
high part the divident in that case though as the remainder that would
be calculated by the DIVU instruction we avoided.
This has passed correctness verification with test_div64 and reduced the
module's average execution time down to 1.0445s and 0.2619s from 1.0668s
and 0.2629s respectively for an R3400 CPU @40MHz and a 5Kc CPU @160MHz.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Our current MIPS platform `__div64_32' handler is inactive, because it
is incorrectly only enabled for 64-bit configurations, for which generic
`do_div' code does not call it anyway.
The handler is not suitable for being called from there though as it
only calculates 32 bits of the quotient under the assumption the 64-bit
divident has been suitably reduced. Code for such reduction used to be
there, however it has been incorrectly removed with commit c21004cd5b4c
("MIPS: Rewrite <asm/div64.h> to work with gcc 4.4.0."), which should
have only updated an obsoleted constraint for an inline asm involving
$hi and $lo register outputs, while possibly wiring the original MIPS
variant of the `do_div' macro as `__div64_32' handler for the generic
`do_div' implementation
Correct the handler as follows then:
- Revert most of the commit referred, however retaining the current
formatting, except for the final two instructions of the inline asm
sequence, which the original commit missed. Omit the original 64-bit
parts though.
- Rename the original `do_div' macro to `__div64_32'. Use the combined
`x' constraint referring to the MD accumulator as a whole, replacing
the original individual `h' and `l' constraints used for $hi and $lo
registers respectively, of which `h' has been obsoleted with GCC 4.4.
Update surrounding code accordingly.
We have since removed support for GCC versions before 4.9, so no need
for a special arrangement here; GCC has supported the `x' constraint
since forever anyway, or at least going back to 1991.
- Rename the `__base' local variable in `__div64_32' to `__radix' to
avoid a conflict with a local variable in `do_div'.
- Actually enable this code for 32-bit rather than 64-bit configurations
by qualifying it with BITS_PER_LONG being 32 instead of 64. Include
<asm/bitsperlong.h> for this macro rather than <linux/types.h> as we
don't need anything else.
- Finally include <asm-generic/div64.h> last rather than first.
This has passed correctness verification with test_div64 and reduced the
module's average execution time down to 1.0668s and 0.2629s from 2.1529s
and 0.5647s respectively for an R3400 CPU @40MHz and a 5Kc CPU @160MHz.
For a reference 64-bit `do_div' code where we have the DDIVU instruction
available to do the whole calculation right away averages at 0.0660s for
the latter CPU.
Fixes: c21004cd5b4c ("MIPS: Rewrite <asm/div64.h> to work with gcc 4.4.0.")
Reported-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # v2.6.30+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
This patch replaces the "open-coded" -pg compile flag with a CC_FLAGS_FTRACE
makefile variable which architectures can override if a different option
should be used for code generation.
Signed-off-by: zhaoxiao <zhaoxiao@uniontech.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
This mostly reverts commit 99bca615d895 ("MIPS: pci-legacy: use generic
pci_enable_resources"). Fixes regressions such as:
ata_piix 0000:00:0a.1: can't enable device: BAR 0 [io 0x01f0-0x01f7] not
claimed
ata_piix: probe of 0000:00:0a.1 failed with error -22
The only changes from the strict revert are to fix checkpatch errors:
ERROR: spaces required around that '=' (ctx:VxV)
#33: FILE: arch/mips/pci/pci-legacy.c:252:
+ for (idx=0; idx < PCI_NUM_RESOURCES; idx++) {
^
ERROR: do not use assignment in if condition
#67: FILE: arch/mips/pci/pci-legacy.c:284:
+ if ((err = pcibios_enable_resources(dev, mask)) < 0)
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Current ebpf disassembly buffer size of 64 is too small. E.g. this line
takes 65 bytes:
01fffff8005822e: ec8100ed8065\tclgrj\t%r8,%r1,8,001fffff80058408\n\0
Double the buffer size like it is done for the kernel disassembly buffer.
Fixes the following KASAN finding:
UG: KASAN: stack-out-of-bounds in print_fn_code+0x34c/0x380
Write of size 1 at addr 001fff800ad5f970 by task test_progs/853
CPU: 53 PID: 853 Comm: test_progs Not tainted
5.12.0-rc7-23786-g23457d86b1f0-dirty #19
Hardware name: IBM 3906 M04 704 (LPAR)
Call Trace:
[<0000000cd8e0538a>] show_stack+0x17a/0x1668
[<0000000cd8e2a5d8>] dump_stack+0x140/0x1b8
[<0000000cd8e16e74>] print_address_description.constprop.0+0x54/0x260
[<0000000cd75a8698>] kasan_report+0xc8/0x130
[<0000000cd6e26da4>] print_fn_code+0x34c/0x380
[<0000000cd6ea0f4e>] bpf_int_jit_compile+0xe3e/0xe58
[<0000000cd72c4c88>] bpf_prog_select_runtime+0x5b8/0x9c0
[<0000000cd72d1bf8>] bpf_prog_load+0xa78/0x19c0
[<0000000cd72d7ad6>] __do_sys_bpf.part.0+0x18e/0x768
[<0000000cd6e0f392>] do_syscall+0x12a/0x220
[<0000000cd8e333f8>] __do_syscall+0x98/0xc8
[<0000000cd8e54834>] system_call+0x6c/0x94
1 lock held by test_progs/853:
#0: 0000000cd9bf7460 (report_lock){....}-{2:2}, at:
kasan_report+0x96/0x130
addr 001fff800ad5f970 is located in stack of task test_progs/853 at
offset 96 in frame:
print_fn_code+0x0/0x380
this frame has 1 object:
[32, 96) 'buffer'
Memory state around the buggy address:
001fff800ad5f800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
001fff800ad5f880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>001fff800ad5f900: 00 00 f1 f1 f1 f1 00 00 00 00 00 00 00 00 f3 f3
^
001fff800ad5f980: f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 00 00
001fff800ad5fa00: 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 00 00
Cc: <stable@vger.kernel.org>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
A review of the code showed, that this function which is exposed
within the whole kernel should do a parameter check for the
amount of bytes requested. If this requested bytes is too high
an unsigned int overflow could happen causing this function to
try to memcpy a really big memory chunk.
This is not a security issue as there are only two invocations
of this function from arch/s390/include/asm/archrandom.h and both
are not exposed to userland.
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
There is not a consistent pattern for checking Hyper-V hypercall status.
Existing code uses a number of variants. The variants work, but a consistent
pattern would improve the readability of the code, and be more conformant
to what the Hyper-V TLFS says about hypercall status.
Implemented new helper functions hv_result(), hv_result_success(), and
hv_repcomp(). Changed the places where hv_do_hypercall() and related variants
are used to use the helper functions.
Signed-off-by: Joseph Salisbury <joseph.salisbury@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1618620183-9967-2-git-send-email-joseph.salisbury@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
This patch makes no functional changes. It simply moves hv_do_rep_hypercall()
out of arch/x86/include/asm/mshyperv.h and into asm-generic/mshyperv.h
hv_do_rep_hypercall() is architecture independent, so it makes sense that it
should be in the architecture independent mshyperv.h, not in the x86-specific
mshyperv.h.
This is done in preperation for a follow up patch which creates a consistent
pattern for checking Hyper-V hypercall status.
Signed-off-by: Joseph Salisbury <joseph.salisbury@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1618620183-9967-1-git-send-email-joseph.salisbury@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Commit in Fixes: added support for kexec-ing a kernel on panic using a
new system call. As part of it, it does prepare a memory map for the new
kernel.
However, while doing so, it wrongly accesses memory it has not
allocated: it accesses the first element of the cmem->ranges[] array in
memmap_exclude_ranges() but it has not allocated the memory for it in
crash_setup_memmap_entries(). As KASAN reports:
BUG: KASAN: vmalloc-out-of-bounds in crash_setup_memmap_entries+0x17e/0x3a0
Write of size 8 at addr ffffc90000426008 by task kexec/1187
(gdb) list *crash_setup_memmap_entries+0x17e
0xffffffff8107cafe is in crash_setup_memmap_entries (arch/x86/kernel/crash.c:322).
317 unsigned long long mend)
318 {
319 unsigned long start, end;
320
321 cmem->ranges[0].start = mstart;
322 cmem->ranges[0].end = mend;
323 cmem->nr_ranges = 1;
324
325 /* Exclude elf header region */
326 start = image->arch.elf_load_addr;
(gdb)
Make sure the ranges array becomes a single element allocated.
[ bp: Write a proper commit message. ]
Fixes: dd5f726076cc ("kexec: support for kexec on panic using new system call")
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Young <dyoung@redhat.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/725fa3dc1da2737f0f6188a1a9701bead257ea9d.camel@gmx.de
|
|
The variable st is being assigned a value that is never read and
it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Denis Efremov <efremov@linux.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20210415130020.1959951-1-colin.king@canonical.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
On s390 each PCI device has a user-defined ID (UID) exposed under
/sys/bus/pci/devices/<dev>/uid. This ID was designed to serve as the PCI
device's primary index and to match the device within Linux to the
device configured in the hypervisor. To serve as a primary identifier
the UID must be unique within the Linux instance, this is guaranteed by
the platform if and only if the UID Uniqueness Checking flag is set
within the CLP List PCI Functions response.
In this sense the UID serves an analogous function as the SMBIOS
instance number or ACPI index exposed as the "index" respectively
"acpi_index" device attributes and used by e.g. systemd to set interface
names. As s390 does not use and will likely never use ACPI nor SMBIOS
there is no conflict and we can just expose the UID under the "index"
attribute whenever UID Uniqueness Checking is active and get systemd's
interface naming support for free.
Link: https://lore.kernel.org/lkml/20210412135905.1434249-1-schnelle@linux.ibm.com/
Acked-by: Viktor Mihajlovski <mihajlov@linux.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Narendra K <narendra_k@dell.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt
BMC device tree updates for 5.13, round two
- Fixes to the first pull request for Rainier
- Small changes for Rainier, EthanolX and Tiogapass
* tag 'bmc-5.13-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: aspeed: tiogapass: add hotplug controller
ARM: dts: aspeed: amd-ethanolx: Enable all used I2C busses
ARM: dts: aspeed: Rainier: Update to pass 2 hardware
ARM: dts: aspeed: Rainier 1S4U: Fix fan nodes
ARM: dts: aspeed: Rainier: Fix humidity sensor bus address
ARM: dts: aspeed: Rainier: Fix PCA9552 on bus 8
Link: https://lore.kernel.org/r/CACPK8XeJdHmxyJn43Ju5hmxJ7+rJgHmx=ANFaL17YUmp+gOtJg@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The !CONFIG_KEXEC_CORE code in arch/x86/platform/uv/uv_nmi.c was unused, untested
and didn't even build for 7 years. Since we fixed this by requiring X86_UV to
depend on CONFIG_KEXEC_CORE, remove the (now) dead code.
Also move the uv_nmi_kexec_failed definition back up to where the other file-scope
global variables are defined.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Mike Travis <travis@sgi.com>
Cc: linux-kernel@vger.kernel.org
|
|
When KEXEC is disabled, the UV build fails:
arch/x86/platform/uv/uv_nmi.c:875:14: error: ‘uv_nmi_kexec_failed’ undeclared (first use in this function)
Since uv_nmi_kexec_failed is only defined in the KEXEC_CORE #ifdef branch,
this code cannot ever have been build tested:
if (main)
pr_err("UV: NMI kdump: KEXEC not supported in this kernel\n");
atomic_set(&uv_nmi_kexec_failed, 1);
Nor is this use possible in uv_handle_nmi():
atomic_set(&uv_nmi_kexec_failed, 0);
These bugs were introduced in this commit:
d0a9964e9873: ("x86/platform/uv: Implement simple dump failover if kdump fails")
Which added the uv_nmi_kexec_failed assignments to !KEXEC code, while making the
definition KEXEC-only - apparently without testing the !KEXEC case.
Instead of complicating the #ifdef maze, simplify the code by requiring X86_UV
to depend on KEXEC_CORE. This pattern is present in other architectures as well.
( We'll remove the untested, 7 years old !KEXEC complications from the file in a
separate commit. )
Fixes: d0a9964e9873: ("x86/platform/uv: Implement simple dump failover if kdump fails")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Mike Travis <travis@sgi.com>
Cc: linux-kernel@vger.kernel.org
|
|
The changes to add KUAP support with the hash MMU broke booting of KVM
PR guests. The symptom is no visible progress of the guest, or possibly
just "SLOF" being printed to the qemu console.
Host code is still executing, but breaking into xmon might show a stack
trace such as:
__might_fault+0x84/0xe0 (unreliable)
kvm_read_guest+0x1c8/0x2f0 [kvm]
kvmppc_ld+0x1b8/0x2d0 [kvm]
kvmppc_load_last_inst+0x50/0xa0 [kvm]
kvmppc_exit_pr_progint+0x178/0x220 [kvm_pr]
kvmppc_handle_exit_pr+0x31c/0xe30 [kvm_pr]
after_sprg3_load+0x80/0x90 [kvm_pr]
kvmppc_vcpu_run_pr+0x104/0x260 [kvm_pr]
kvmppc_vcpu_run+0x34/0x48 [kvm]
kvm_arch_vcpu_ioctl_run+0x340/0x450 [kvm]
kvm_vcpu_ioctl+0x2ac/0x8c0 [kvm]
sys_ioctl+0x320/0x1060
system_call_exception+0x160/0x270
system_call_common+0xf0/0x27c
Bisect points to commit b2ff33a10c8b ("powerpc/book3s64/hash/kuap:
Enable kuap on hash"), but that's just the commit that enabled KUAP with
hash and made the bug visible.
The root cause seems to be that KVM PR is creating kernel mappings that
don't use the correct key, since we switched to using key 3.
We have a helper for adding the right key value, however it's designed
to take a pteflags variable, which the KVM code doesn't have. But we can
make it work by passing 0 for the pteflags, and tell it explicitly that
it should use the kernel key.
With that changed guests boot successfully.
Fixes: d94b827e89dc ("powerpc/book3s64/kuap: Use Key 3 for kernel mapping with hash translation")
Cc: stable@vger.kernel.org # v5.11+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210419120139.1455937-1-mpe@ellerman.id.au
|
|
RCU complains about us calling printk() from an offline CPU:
=============================
WARNING: suspicious RCU usage
5.12.0-rc7-02874-g7cf90e481cb8 #1 Not tainted
-----------------------------
kernel/locking/lockdep.c:3568 RCU-list traversed in non-reader section!!
other info that might help us debug this:
RCU used illegally from offline CPU!
rcu_scheduler_active = 2, debug_locks = 1
no locks held by swapper/0/0.
stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc7-02874-g7cf90e481cb8 #1
Call Trace:
dump_stack+0xec/0x144 (unreliable)
lockdep_rcu_suspicious+0x124/0x144
__lock_acquire+0x1098/0x28b0
lock_acquire+0x128/0x600
_raw_spin_lock_irqsave+0x6c/0xc0
down_trylock+0x2c/0x70
__down_trylock_console_sem+0x60/0x140
vprintk_emit+0x1a8/0x4b0
vprintk_func+0xcc/0x200
printk+0x40/0x54
pseries_cpu_offline_self+0xc0/0x120
arch_cpu_idle_dead+0x54/0x70
do_idle+0x174/0x4a0
cpu_startup_entry+0x38/0x40
rest_init+0x268/0x388
start_kernel+0x748/0x790
start_here_common+0x1c/0x614
Which happens because by the time we get to rtas_stop_self() we are
already offline. In addition the message can be spammy, and is not that
helpful for users, so remove it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210418135413.1204031-1-mpe@ellerman.id.au
|
|
We have some interesting code in our Makefile to define _TASK_CPU, based
on awk'ing the value out of asm-offsets.h. It exists to circumvent some
circular header dependencies that prevent us from referring to
task_struct in the relevant code. See the comment around _TASK_CPU in
smp.h for more detail.
Maybe one day we can come up with a better solution, but for now we can
at least limit that logic to 32-bit, because it's not needed for 64-bit.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210418131641.1186227-1-mpe@ellerman.id.au
|
|
Currently, neither the vio_bus or vio_driver structures provide support
for a shutdown() routine.
Add support for shutdown() by allowing drivers to provide a
implementation via function pointer in their vio_driver struct and
provide a proper implementation in the driver template for the vio_bus
that calls a vio drivers shutdown() if defined.
In the case that no shutdown() is defined by a vio driver and a kexec is
in progress we implement a big hammer that calls remove() to ensure no
further DMA for the devices is possible.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210402001325.939668-1-tyreld@linux.ibm.com
|
|
PERF_SAMPLE_WEIGHT_STRUCT
Performance Monitoring Unit (PMU) registers in powerpc provides
information on cycles elapsed between different stages in the
pipeline. This can be used for application tuning. On ISA v3.1
platform, this information is exposed by sampling registers.
Patch adds kernel support to capture two of the cycle counters
as part of perf sample using the sample type:
PERF_SAMPLE_WEIGHT_STRUCT.
The power PMU function 'get_mem_weight' currently uses 64 bit weight
field of perf_sample_data to capture memory latency. But following the
introduction of PERF_SAMPLE_WEIGHT_TYPE, weight field could contain
64-bit or 32-bit value depending on the architexture support for
PERF_SAMPLE_WEIGHT_STRUCT. Patches uses WEIGHT_STRUCT to expose the
pipeline stage cycles info. Hence update the ppmu functions to work for
64-bit and 32-bit weight values.
If the sample type is PERF_SAMPLE_WEIGHT, use the 64-bit weight field.
if the sample type is PERF_SAMPLE_WEIGHT_STRUCT, memory subsystem
latency is stored in the low 32bits of perf_sample_weight structure.
Also for CPU_FTR_ARCH_31, capture the two cycle counter information in
two 16 bit fields of perf_sample_weight structure.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1616425047-1666-2-git-send-email-atrajeev@linux.vnet.ibm.com
|
