| Age | Commit message (Collapse) | Author |
|---|
|
Some headers are not necessary, remove them and sort includes.
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
We need the fixes in here and this resolves a merge issue with
drivers/usb/gadget/udc/bdc/Kconfig.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iwamatsu/linux-visconti into arm/dt
Visconti device tree updates for 5.11
- Add watchdog support for TMPV7708 SoC
- Add entries for Toshiba Visconti5 watchdog driver
* tag 'visconti-arm-dt-for-v5.11-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/iwamatsu/linux-visconti:
arm64: dts: visconti: Add watchdog support for TMPV7708 SoC
MAINTAINERS: Add entries for Toshiba Visconti5 watchdog driver
Link: https://lore.kernel.org/r/20210125003357.yd72y4f5vcdnvhnr@toshiba.co.jp
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Enable MMC on the Falcon board.
Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com>
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
[wsa: double checked, rebased, slightly improved, moved to falcon-cpu]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210125075845.3864-3-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add a device node for MMC.
Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com>
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
[wsa: double checked & rebased]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210125075845.3864-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Define the generic parts of the HSCIF[0-3] device nodes.
Signed-off-by: Linh Phung <linh.phung.jy@renesas.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Link: https://lore.kernel.org/r/20210121110008.15894-4-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
SCIF0 has been enabled by the firmware, so it worked already. Still, add
the proper nodes to make it work in any case.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210121110008.15894-3-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
This is the result of multiple patches taken from the BSP, combined,
rebased, and properly sorted. SCIF0 gets DMA properties, other SCIFs are
entirely new.
Signed-off-by: Linh Phung <linh.phung.jy@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210121110008.15894-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210121100619.5653-5-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Define the generic parts of Ethernet-AVB device nodes. Only AVB0 was
tested because it was the only port with a PHY on current hardware.
Signed-off-by: Tho Vu <tho.vu.wh@renesas.com>
[wsa: double checked, rebased, added "internal-delay" properties]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210121100619.5653-4-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210121095420.5023-4-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add I2C devicetree description to V3U
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
[wsa: rebased and double checked]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210121095420.5023-3-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Some SDHI instances are solely used for eMMC. Disable SD and SDIO
for faster initialization.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Adam Ford <aford173@gmail.com> (beacon)
Link: https://lore.kernel.org/r/20210119133322.87289-1-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
We may lose edge interrupts for gpio banks other than the first gpio
bank as they are not always powered. Instead, we must use the padconf
interrupt as that is always powered.
Note that we still also use the gpio for reading the pin state as that
can't be done with the padconf device.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
In accordance with the DWC USB3 bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
named.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
|
|
Syonpsys IP cores are supposed to be defined with "snps" vendor-prefix.
Use it instead of the deprecated "synopsys" one.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
Backmerge v5.11-rc5 into drm-next to clean up a bunch of conflicts we are dragging around.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Pickup fixes that went upstream already in order to resolve conflicts in
litex_soc_ctrl.c between 5.11 fixes that went upstream and the
or1k-5.12-updates linux-next queue.
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
Replace the gendisk pointer in struct bio with a pointer to the newly
improved struct block device. From that the gendisk can be trivially
accessed with an extra indirection, but it also allows to directly
look up all information related to partition remapping.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add watchdog node in TMPV7708's dtsi, and tmpv7708-rm-mbrc boards's
dts.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
|
|
Pull arch/sh updates from Rich Felker:
"Cleanup and warning fixes"
* tag 'sh-for-5.11' of git://git.libc.org/linux-sh:
sh/intc: Restore devm_ioremap() alignment
sh: mach-sh03: remove duplicate include
arch: sh: remove duplicate include
sh: Drop ARCH_NR_GPIOS definition
sh: Remove unused HAVE_COPY_THREAD_TLS macro
sh: remove CONFIG_IDE from most defconfig
sh: mm: Convert to DEFINE_SHOW_ATTRIBUTE
sh: intc: Convert to DEFINE_SHOW_ATTRIBUTE
arch/sh: hyphenate Non-Uniform in Kconfig prompt
sh: dma: fix kconfig dependency for G2_DMA
|
|
Merge misc fixes from Andrew Morton:
"18 patches.
Subsystems affected by this patch series: mm (pagealloc, memcg, kasan,
memory-failure, and highmem), ubsan, proc, and MAINTAINERS"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
MAINTAINERS: add a couple more files to the Clang/LLVM section
proc_sysctl: fix oops caused by incorrect command parameters
powerpc/mm/highmem: use __set_pte_at() for kmap_local()
mips/mm/highmem: use set_pte() for kmap_local()
mm/highmem: prepare for overriding set_pte_at()
sparc/mm/highmem: flush cache and TLB
mm: fix page reference leak in soft_offline_page()
ubsan: disable unsigned-overflow check for i386
kasan, mm: fix resetting page_alloc tags for HW_TAGS
kasan, mm: fix conflicts with init_on_alloc/free
kasan: fix HW_TAGS boot parameters
kasan: fix incorrect arguments passing in kasan_add_zero_shadow
kasan: fix unaligned address is unhandled in kasan_remove_zero_shadow
mm: fix numa stats for thp migration
mm: memcg: fix memcg file_dirty numa stat
mm: memcg/slab: optimize objcg stock draining
mm: fix initialization of struct page for holes in memory layout
x86/setup: don't remove E820_TYPE_RAM for pfn 0
|
|
The original PowerPC highmem mapping function used __set_pte_at() to
denote that the mapping is per CPU. This got lost with the conversion
to the generic implementation.
Override the default map function.
Link: https://lkml.kernel.org/r/20210112170411.281464308@linutronix.de
Fixes: 47da42b27a56 ("powerpc/mm/highmem: Switch to generic kmap atomic")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
set_pte_at() on MIPS invokes update_cache() which might recurse into
kmap_local().
Use set_pte() like the original MIPS highmem implementation did.
Link: https://lkml.kernel.org/r/20210112170411.187513575@linutronix.de
Fixes: a4c33e83bca1 ("mips/mm/highmem: Switch to generic kmap atomic")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Paul Cercueil <paul@crapouillou.net>
Reported-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm/highmem: Fix fallout from generic kmap_local
conversions".
The kmap_local conversion wreckaged sparc, mips and powerpc as it missed
some of the details in the original implementation.
This patch (of 4):
The recent conversion to the generic kmap_local infrastructure failed to
assign the proper pre/post map/unmap flush operations for sparc.
Sparc requires cache flush before map/unmap and tlb flush afterwards.
Link: https://lkml.kernel.org/r/20210112170136.078559026@linutronix.de
Link: https://lkml.kernel.org/r/20210112170410.905976187@linutronix.de
Fixes: 3293efa97807 ("sparc/mm/highmem: Switch to generic kmap atomic")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Correct the marking of kthreads which are supposed to run on a
specific, single CPU vs such which are affine to only one CPU, mark
per-cpu workqueue threads as such and make sure that marking
"survives" CPU hotplug. Fix CPU hotplug issues with such kthreads.
- A fix to not push away tasks on CPUs coming online.
- Have workqueue CPU hotplug code use cpu_possible_mask when breaking
affinity on CPU offlining so that pending workers can finish on newly
arrived onlined CPUs too.
- Dump tasks which haven't vacated a CPU which is currently being
unplugged.
- Register a special scale invariance callback which gets called on
resume from RAM to read out APERF/MPERF after resume and thus make
the schedutil scaling governor more precise.
* tag 'sched_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Relax the set_cpus_allowed_ptr() semantics
sched: Fix CPU hotplug / tighten is_per_cpu_kthread()
sched: Prepare to use balance_push in ttwu()
workqueue: Restrict affinity change to rescuer
workqueue: Tag bound workers with KTHREAD_IS_PER_CPU
kthread: Extract KTHREAD_IS_PER_CPU
sched: Don't run cpu-online with balance_push() enabled
workqueue: Use cpu_possible_mask instead of cpu_active_mask to break affinity
sched/core: Print out straggler tasks in sched_cpu_dying()
x86: PM: Register syscore_ops for scale invariance
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add a new Intel model number for Alder Lake
- Differentiate which aspects of the FPU state get saved/restored when
the FPU is used in-kernel and fix a boot crash on K7 due to early
MXCSR access before CR4.OSFXSR is even set.
- A couple of noinstr annotation fixes
- Correct die ID setting on AMD for users of topology information which
need the correct die ID
- A SEV-ES fix to handle string port IO to/from kernel memory properly
* tag 'x86_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add another Alder Lake CPU to the Intel family
x86/mmx: Use KFPU_387 for MMX string operations
x86/fpu: Add kernel_fpu_begin_mask() to selectively initialize state
x86/topology: Make __max_die_per_package available unconditionally
x86: __always_inline __{rd,wr}msr()
x86/mce: Remove explicit/superfluous tracing
locking/lockdep: Avoid noinstr warning for DEBUG_LOCKDEP
locking/lockdep: Cure noinstr fail
x86/sev: Fix nonistr violation
x86/entry: Fix noinstr fail
x86/cpu/amd: Set __max_die_per_package on AMD
x86/sev-es: Handle string port IO to kernel memory properly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a bad interaction between the scv handling and the fallback L1D
flush, which could lead to user register corruption. Only affects
people using scv (~no one) on machines with old firmware that are
missing the L1D flush.
- Two small selftest fixes.
Thanks to Eirik Fuller, Libor Pechacek, Nicholas Piggin, Sandipan Das,
and Tulio Magno Quites Machado Filho.
* tag 'powerpc-5.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: fix scv entry fallback flush vs interrupt
selftests/powerpc: Only test lwm/stmw on big endian
selftests/powerpc: Fix exit status of pkey tests
|
|
Patch series "mm: fix initialization of struct page for holes in memory layout", v3.
Commit 73a6e474cb37 ("mm: memmap_init: iterate over memblock regions
rather that check each PFN") exposed several issues with the memory map
initialization and these patches fix those issues.
Initially there were crashes during compaction that Qian Cai reported
back in April [1]. It seemed back then that the problem was fixed, but
a few weeks ago Andrea Arcangeli hit the same bug [2] and there was an
additional discussion at [3].
[1] https://lore.kernel.org/lkml/8C537EB7-85EE-4DCF-943E-3CC0ED0DF56D@lca.pw
[2] https://lore.kernel.org/lkml/20201121194506.13464-1-aarcange@redhat.com
[3] https://lore.kernel.org/mm-commits/20201206005401.qKuAVgOXr%akpm@linux-foundation.org
This patch (of 2):
The first 4Kb of memory is a BIOS owned area and to avoid its allocation
for the kernel it was not listed in e820 tables as memory. As the result,
pfn 0 was never recognised by the generic memory management and it is not
a part of neither node 0 nor ZONE_DMA.
If set_pfnblock_flags_mask() would be ever called for the pageblock
corresponding to the first 2Mbytes of memory, having pfn 0 outside of
ZONE_DMA would trigger
VM_BUG_ON_PAGE(!zone_spans_pfn(page_zone(page), pfn), page);
Along with reserving the first 4Kb in e820 tables, several first pages are
reserved with memblock in several places during setup_arch(). These
reservations are enough to ensure the kernel does not touch the BIOS area
and it is not necessary to remove E820_TYPE_RAM for pfn 0.
Remove the update of e820 table that changes the type of pfn 0 and move
the comment describing why it was done to trim_low_memory_range() that
reserves the beginning of the memory.
Link: https://lkml.kernel.org/r/20210111194017.22696-2-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This implements the missing mount_setattr() syscall. While the new mount
api allows to change the properties of a superblock there is currently
no way to change the properties of a mount or a mount tree using file
descriptors which the new mount api is based on. In addition the old
mount api has the restriction that mount options cannot be applied
recursively. This hasn't changed since changing mount options on a
per-mount basis was implemented in [1] and has been a frequent request
not just for convenience but also for security reasons. The legacy
mount syscall is unable to accommodate this behavior without introducing
a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND |
MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost
mount. Changing MS_REC to apply to the whole mount tree would mean
introducing a significant uapi change and would likely cause significant
regressions.
The new mount_setattr() syscall allows to recursively clear and set
mount options in one shot. Multiple calls to change mount options
requesting the same changes are idempotent:
int mount_setattr(int dfd, const char *path, unsigned flags,
struct mount_attr *uattr, size_t usize);
Flags to modify path resolution behavior are specified in the @flags
argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW,
and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to
restrict path resolution as introduced with openat2() might be supported
in the future.
The mount_setattr() syscall can be expected to grow over time and is
designed with extensibility in mind. It follows the extensible syscall
pattern we have used with other syscalls such as openat2(), clone3(),
sched_{set,get}attr(), and others.
The set of mount options is passed in the uapi struct mount_attr which
currently has the following layout:
struct mount_attr {
__u64 attr_set;
__u64 attr_clr;
__u64 propagation;
__u64 userns_fd;
};
The @attr_set and @attr_clr members are used to clear and set mount
options. This way a user can e.g. request that a set of flags is to be
raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in
@attr_set while at the same time requesting that another set of flags is
to be lowered such as removing noexec from a mount tree by specifying
MOUNT_ATTR_NOEXEC in @attr_clr.
Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0,
not a bitmap, users wanting to transition to a different atime setting
cannot simply specify the atime setting in @attr_set, but must also
specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that
MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set
can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in
@attr_clr.
The @propagation field lets callers specify the propagation type of a
mount tree. Propagation is a single property that has four different
settings and as such is not really a flag argument but an enum.
Specifically, it would be unclear what setting and clearing propagation
settings in combination would amount to. The legacy mount() syscall thus
forbids the combination of multiple propagation settings too. The goal
is to keep the semantics of mount propagation somewhat simple as they
are overly complex as it is.
The @userns_fd field lets user specify a user namespace whose idmapping
becomes the idmapping of the mount. This is implemented and explained in
detail in the next patch.
[1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount")
Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com
Cc: David Howells <dhowells@redhat.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
Extend some inode methods with an additional user namespace argument. A
filesystem that is aware of idmapped mounts will receive the user
namespace the mount has been marked with. This can be used for
additional permission checking and also to enable filesystems to
translate between uids and gids if they need to. We have implemented all
relevant helpers in earlier patches.
As requested we simply extend the exisiting inode method instead of
introducing new ones. This is a little more code churn but it's mostly
mechanical and doesnt't leave us with additional inode methods.
Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
When file attributes are changed most filesystems rely on the
setattr_prepare(), setattr_copy(), and notify_change() helpers for
initialization and permission checking. Let them handle idmapped mounts.
If the inode is accessed through an idmapped mount map it into the
mount's user namespace. Afterwards the checks are identical to
non-idmapped mounts. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.
Helpers that perform checks on the ia_uid and ia_gid fields in struct
iattr assume that ia_uid and ia_gid are intended values and have already
been mapped correctly at the userspace-kernelspace boundary as we
already do today. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
interrupt
When an asynchronous interrupt calls irq_exit, it checks for softirqs
that may have been created, and runs them. Running softirqs enables
local irqs, which can replay pending interrupts causing recursion in
replay_soft_interrupts. This abridged trace shows how this can occur:
! NIP replay_soft_interrupts
LR interrupt_exit_kernel_prepare
Call Trace:
interrupt_exit_kernel_prepare (unreliable)
interrupt_return
--- interrupt: ea0 at __rb_reserve_next
NIP __rb_reserve_next
LR __rb_reserve_next
Call Trace:
ring_buffer_lock_reserve
trace_function
function_trace_call
ftrace_call
__do_softirq
irq_exit
timer_interrupt
! replay_soft_interrupts
interrupt_exit_kernel_prepare
interrupt_return
--- interrupt: ea0 at arch_local_irq_restore
This can not be prevented easily, because softirqs must not block hard
irqs, so it has to be dealt with.
The recursion is bounded by design in the softirq code because softirq
replay disables softirqs and loops around again to check for new
softirqs created while it ran, so that's not a problem.
However it does mess up interrupt replay state, causing superfluous
interrupts when the second replay_soft_interrupts clears a pending
interrupt, leaving it still set in the first call in the 'happened'
local variable.
Fix this by not caching a copy of irqs_happened across interrupt
handler calls.
Fixes: 3282a3da25bd ("powerpc/64: Implement soft interrupt replay in C")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210123061244.2076145-1-npiggin@gmail.com
|
|
Hyp code used the hyp_symbol_addr helper to force PC-relative addressing
because absolute addressing results in kernel VAs due to the way hyp
code is linked. This is not true anymore, so remove the helper and
update all of its users.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210105180541.65031-9-dbrazdil@google.com
|
|
Storing a function pointer in hyp now generates relocation information
used at early boot to convert the address to hyp VA. The existing
alternative-based conversion mechanism is therefore obsolete. Remove it
and simplify its users.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210105180541.65031-8-dbrazdil@google.com
|
|
Hyp code uses absolute addressing to obtain a kimg VA of a small number
of kernel symbols. Since the kernel now converts constant pool addresses
to hyp VAs, this trick does not work anymore.
Change the helpers to convert from hyp VA back to kimg VA or PA, as
needed and rework the callers accordingly.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210105180541.65031-7-dbrazdil@google.com
|
|
KVM nVHE code runs under a different VA mapping than the kernel, hence
so far it avoided using absolute addressing because the VA in a constant
pool is relocated by the linker to a kernel VA (see hyp_symbol_addr).
Now the kernel has access to a list of positions that contain a kimg VA
but will be accessed only in hyp execution context. These are generated
by the gen-hyprel build-time tool and stored in .hyp.reloc.
Add early boot pass over the entries and convert the kimg VAs to hyp VAs.
Note that this requires for .hyp* ELF sections to be mapped read-write
at that point.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210105180541.65031-6-dbrazdil@google.com
|
|
Add a post-processing step to compilation of KVM nVHE hyp code which
calls a custom host tool (gen-hyprel) on the partially linked object
file (hyp sections' names prefixed).
The tool lists all R_AARCH64_ABS64 data relocations targeting hyp
sections and generates an assembly file that will form a new section
.hyp.reloc in the kernel binary. The new section contains an array of
32-bit offsets to the positions targeted by these relocations.
Since these addresses of those positions will not be determined until
linking of `vmlinux`, each 32-bit entry carries a R_AARCH64_PREL32
relocation with addend <section_base_sym> + <r_offset>. The linker of
`vmlinux` will therefore fill the slot accordingly.
This relocation data will be used at runtime to convert the kernel VAs
at those positions to hyp VAs.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210105180541.65031-5-dbrazdil@google.com
|
|
Generating hyp relocations will require referencing positions at a given
offset from the beginning of hyp sections. Since the final layout will
not be determined until the linking of `vmlinux`, modify the hyp linker
script to insert a symbol at the first byte of each hyp section to use
as an anchor. The linker of `vmlinux` will place the symbols together
with the sections.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210105180541.65031-4-dbrazdil@google.com
|
|
We will need to recognize pointers in .rodata specific to hyp, so
establish a .hyp.rodata ELF section. Merge it with the existing
.hyp.data..ro_after_init as they are treated the same at runtime.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210105180541.65031-3-dbrazdil@google.com
|
|
So far hyp-init.S created a .hyp.idmap.text section directly, without
relying on the hyp linker script to prefix its name. Change it to create
.idmap.text and add a HYP_SECTION entry to hyp.lds.S. This way all .hyp*
sections go through the linker script and can be instrumented there.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210105180541.65031-2-dbrazdil@google.com
|
|
The max_mapnr is the number of PFNs, not absolute PFN offset.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Fixes: d0d8aae64566 ("RISC-V: Set maximum number of mapped pages correctly")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.11, round 2:
- Fix pcf2127 reset for imx7d-flex-concentrator board.
- Fix i.MX6 suspend with Thumb-2 kernel.
- Fix ethernet-phy address issue on imx6qdl-sr-som board.
- Fix GPIO3 `gpio-ranges` on i.MX8MP.
- Select SOC_BUS for IMX_SCU driver to fix build issue.
* tag 'imx-fixes-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
firmware: imx: select SOC_BUS to fix firmware build
arm64: dts: imx8mp: Correct the gpio ranges of gpio3
ARM: dts: imx6qdl-sr-som: fix some cubox-i platforms
ARM: imx: build suspend-imx6.S with arm instruction set
ARM: dts: imx7d-flex-concentrator: fix pcf2127 reset
Link: https://lore.kernel.org/r/20210119091949.GD4356@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Fix the node names for the MMC/SD card controller to conform
to the standard node name mmc@..
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210122222038.2888747-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt
Ux500 DTS updates for the v5.12 kernel cycle:
- A new DTS file for the Samsung GT-I9070 (Janice)
- Fix up ADC channel name attributes
- Add charger interrupts
- Add thermistors to the HREF boards
- Remove the non-existing AB8505 HW ADC IRQ
- Push down the VMMCI setting to each board
- Add the die temperature channel to teh AB8505
- Fix up the MMC host names to follow the standard
naming convention
* tag 'ux500-dts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: Fix up MMC host node names
ARM: dts: ux500: Add die temperature to AB8505
ARM: dts: ux500: Push VMMCI down to each tree
ARM: dts: ux500: Remove the GPADC HW IRQ
ARM: dts: ux500: Add thermistors to the HREF
ARM: dts: ux500: Add interrupts to charger
ARM: dts: ux500: Fix channel names attributes
ARM: dts: ux500: Add a device tree for Janice
Link: https://lore.kernel.org/r/CACRpkdbn=P63V9aEO2wKu2DwvVUcbjwCEV_JvKwWZ0netT75ig@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add a non-empty dma-ranges so that DMA address translation happens.
Fixes: 2013a4b684b6 ("arm64: dts: broadcom: clear the warnings caused by empty dma-ranges")
Signed-off-by: Bharat Gooty <bharat.gooty@broadcom.com>
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Correctly mask out bits 63:60 in a kernel tag check fault address
(specified as unknown by the architecture). Previously they were just
zeroed but for kernel pointers they need to be all ones.
- Fix a panic (unexpected kernel BRK exception) caused by kprobes being
reentered due to an interrupt.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kprobes: Fix Uexpected kernel BRK exception at EL1
kasan, arm64: fix pointer tags in KASAN reports
|
|
The standard mandates that these nodes be named
mmc@... not sdi_foo@...
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Enable Command DB driver to query the shared system resources on
platforms using RPMh such as SDX55.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118053853.56224-14-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Enable RPMh power domain driver to support power-domains on platforms
like SDX55.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118053853.56224-13-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
