summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2021-01-22ARM: qcom_defconfig: Enable ARM PSCI supportManivannan Sadhasivam
Enable ARM Power State Coordination Interface (PSCI) support on Qualcomm platforms. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210118053853.56224-12-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: qcom_defconfig: Enable watchdog driverManivannan Sadhasivam
Enable watchdog driver for Qualcomm platforms. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210118053853.56224-11-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: qcom_defconfig: Enable RPMh regulatorManivannan Sadhasivam
Enable RPMh regulator for using with platforms like SDX55. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210118053853.56224-10-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: qcom_defconfig: Enable ARM SMMUManivannan Sadhasivam
Enable ARM SMMU driver for using with platforms like SDX55. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210118053853.56224-9-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: qcom_defconfig: Enable DWC3 controller and PHYsManivannan Sadhasivam
Enable DWC3 controller, QMP PHY and SNPS HS PHY for using with platforms like SDX55. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210118053853.56224-8-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22arm64: dts: qcom: Add missing "-thermal" suffix for thermal zonesManivannan Sadhasivam
The thermal devicetree binding requires the "-thermal" suffix for all thermal zones. Hence, add the missing suffix for PMIC based thermal zones. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210118051005.55958-8-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: dts: qcom: replace status value "ok" by "okay"Adrian Schmutzler
While the DT parser recognizes "ok" as a valid value for the "status" property, it is actually mentioned nowhere. Use the proper value "okay" instead, as done in the majority of files already. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Link: https://lore.kernel.org/r/20200830191643.20717-1-freifunk@adrianschmutzler.de [bjorn: Rebased and included fixup of sdx55-mtp] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: dts: qcom: add additional DT labels in qcom-ipq8064.dtsiAdrian Schmutzler
This adds some additional DT labels which are handy when referring to the nodes in derived DTS(I) files. It will also make the definitions more consistent, e.g. by adding gsbi2_serial and gsbi5_serial where we previously "only" had gsbi4_serial defined. While at it, add missing spaces after some DT labels and remove one useless empty line. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Link: https://lore.kernel.org/r/20200902165159.7733-1-freifunk@adrianschmutzler.de Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: dts: qcom: remove commented mmc-ddr-1_8v for sdcc3Adrian Schmutzler
This property appears to be commented out, so we can remove it as well. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Link: https://lore.kernel.org/r/20200902165159.7733-2-freifunk@adrianschmutzler.de Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: dts: qcom: add Alfa Network AP120C-ACRobert Marko
ALFA Network AP120C-AC is a dual-band ceiling AP, based on Qualcomm IPQ4018 + QCA8075 platform. Specification: - Qualcomm IPQ4018 (717 MHz) - 256 MB of RAM (DDR3) - 16 MB (SPI NOR) + 128 or 512 MB (SPI NAND) of flash - 2x Gbps Ethernet, with 802.3af PoE support in one port - 2T2R 2.4/5 GHz (IPQ4018), with ext. FEMs (QFE1952, QFE1922) - 3x U.FL connectors - 1x 1.8 dBi (Bluetooth) and 2x 3/5 dBi dual-band (Wi-Fi) antennas - Atmel/Microchip AT97SC3205T TPM module (I2C bus) - TI CC2540 Bluetooth LE module (USB 2.0 bus) - 1x button (reset) - 1x USB 2.0 - DC jack for main power input (12 V) - UART header available on PCB (2.0 mm pitch) This adds DTS for both the generic and custom Bit edition for Sartura. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Link: https://lore.kernel.org/r/20200909195640.3127341-4-robert.marko@sartura.hr Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: dts: qcom: add 8devices JalapenoRobert Marko
8devices Jalapeno is a dual-band SoM, based on Qualcomm IPQ4018 + QCA8072 platform. Specification: QCA IPQ4018, Quad core ARM v7 Cortex A7 717MHz 256 MB of DDR3 RAM 8 MB of SPI NOR flash 128 MB of Winbond SPI NAND flash WLAN1: Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2 WLAN2: Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2 ETH: Qualcomm Atheros QCA8072 Gigabit Switch (1 x LAN, 1 x WAN) Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Link: https://lore.kernel.org/r/20200909195640.3127341-3-robert.marko@sartura.hr Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: dts: qcom: ipq4019: add more labelsRobert Marko
Lets add labels to more commonly used nodes for easier modification in board DTS files. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Link: https://lore.kernel.org/r/20200909195640.3127341-2-robert.marko@sartura.hr Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: dts: qcom: ipq4019: add USB devicetree nodesJohn Crispin
Since we now have driver for the USB PHY, and USB controller is already supported by the DWC3 driver lets add the necessary nodes to DTSI. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200909163831.1894142-1-robert.marko@sartura.hr Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: dts: qcom: add prng definition to ipq806xJonathan McDowell
Add missing prng definition for ipq806x SoC Signed-off-by: Jonathan McDowell <noodles@earth.li> Link: https://lore.kernel.org/r/20200705142544.GA3389@earth.li Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: qcom_defconfig: Enable UBI file systemManivannan Sadhasivam
Enable UBI file system support. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210118053853.56224-7-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: qcom_defconfig: Enable MTD UBI driverManivannan Sadhasivam
Enable MTD UBI driver for using partitions on top of NAND flash in platforms like SDX55. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210118053853.56224-6-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: qcom_defconfig: Enable SMEM partition parserManivannan Sadhasivam
Enable Qcom SMEM partition parser driver to make use of the NAND partitions defined in Shared Memory (SMEM). Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210118053853.56224-5-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: qcom_defconfig: Enable SDX55 GCC driverManivannan Sadhasivam
Enable Qcom SDX55 GCC driver for clock support. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210118053853.56224-4-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: qcom_defconfig: Enable SDX55 pinctrl driverManivannan Sadhasivam
Enable the Qcom SDX55 pinctrl driver and also enable the PINCTRL_MSM driver explicitly since it is not selected by default directly. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210118053853.56224-3-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: qcom_defconfig: Enable RPMh driversManivannan Sadhasivam
Enable Qcom RPMh drivers for using it in platforms like SDX55. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210118053853.56224-2-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: dts: qcom: sdx55: Add pshold supportManivannan Sadhasivam
Add support for pshold block to drive pshold towards the PMIC, which is used to trigger a configurable event such as reboot or poweroff of the SDX55 platform. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210118051005.55958-7-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: dts: qcom: sdx55: Add Watchdog supportManivannan Sadhasivam
Enable Watchdog support for Application Processor Subsystem (APSS) block on SDX55 platform. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210118051005.55958-6-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: dts: qcom: sdx55-mtp: Enable USB3 and PHY supportManivannan Sadhasivam
Enable the support for USB3 controller, QMP PHY and HS PHY on SDX55 MTP. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210118051005.55958-4-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: dts: qcom: sdx55: Add USB3 and PHY supportManivannan Sadhasivam
Add devicetree nodes for enabling USB3 controller, Qcom QMP PHY and SNPS HS PHY on SDX55. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210118051005.55958-3-manivannan.sadhasivam@linaro.org [bjorn: Added missing #power-domain-cells to &gcc] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-22ARM: mstar: Unify common parts of BreadBee boards into a dtsiDaniel Palmer
The BreadBee and the BreadBee Crust are the same PCB with a different SoC mounted. There are two top level dts to handle this. To avoid deduplicating the parts that are more related to the PCB than the SoC (i.e. the voltage regs and LEDs) add a common dtsi that can be included in both top level dts. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Link: https://lore.kernel.org/r/20201224020354.2212037-1-daniel@0x0f.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-22arm64: kprobes: Fix Uexpected kernel BRK exception at EL1Qais Yousef
I was hitting the below panic continuously when attaching kprobes to scheduler functions [ 159.045212] Unexpected kernel BRK exception at EL1 [ 159.053753] Internal error: BRK handler: f2000006 [#1] PREEMPT SMP [ 159.059954] Modules linked in: [ 159.063025] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.11.0-rc4-00008-g1e2a199f6ccd #56 [rt-app] <notice> [1] Exiting.[ 159.071166] Hardware name: ARM Juno development board (r2) (DT) [ 159.079689] pstate: 600003c5 (nZCv DAIF -PAN -UAO -TCO BTYPE=--) [ 159.085723] pc : 0xffff80001624501c [ 159.089377] lr : attach_entity_load_avg+0x2ac/0x350 [ 159.094271] sp : ffff80001622b640 [rt-app] <notice> [0] Exiting.[ 159.097591] x29: ffff80001622b640 x28: 0000000000000001 [ 159.105515] x27: 0000000000000049 x26: ffff000800b79980 [ 159.110847] x25: ffff00097ef37840 x24: 0000000000000000 [ 159.116331] x23: 00000024eacec1ec x22: ffff00097ef12b90 [ 159.121663] x21: ffff00097ef37700 x20: ffff800010119170 [rt-app] <notice> [11] Exiting.[ 159.126995] x19: ffff00097ef37840 x18: 000000000000000e [ 159.135003] x17: 0000000000000001 x16: 0000000000000019 [ 159.140335] x15: 0000000000000000 x14: 0000000000000000 [ 159.145666] x13: 0000000000000002 x12: 0000000000000002 [ 159.150996] x11: ffff80001592f9f0 x10: 0000000000000060 [ 159.156327] x9 : ffff8000100f6f9c x8 : be618290de0999a1 [ 159.161659] x7 : ffff80096a4b1000 x6 : 0000000000000000 [ 159.166990] x5 : ffff00097ef37840 x4 : 0000000000000000 [ 159.172321] x3 : ffff000800328948 x2 : 0000000000000000 [ 159.177652] x1 : 0000002507d52fec x0 : ffff00097ef12b90 [ 159.182983] Call trace: [ 159.185433] 0xffff80001624501c [ 159.188581] update_load_avg+0x2d0/0x778 [ 159.192516] enqueue_task_fair+0x134/0xe20 [ 159.196625] enqueue_task+0x4c/0x2c8 [ 159.200211] ttwu_do_activate+0x70/0x138 [ 159.204147] sched_ttwu_pending+0xbc/0x160 [ 159.208253] flush_smp_call_function_queue+0x16c/0x320 [ 159.213408] generic_smp_call_function_single_interrupt+0x1c/0x28 [ 159.219521] ipi_handler+0x1e8/0x3c8 [ 159.223106] handle_percpu_devid_irq+0xd8/0x460 [ 159.227650] generic_handle_irq+0x38/0x50 [ 159.231672] __handle_domain_irq+0x6c/0xc8 [ 159.235781] gic_handle_irq+0xcc/0xf0 [ 159.239452] el1_irq+0xb4/0x180 [ 159.242600] rcu_is_watching+0x28/0x70 [ 159.246359] rcu_read_lock_held_common+0x44/0x88 [ 159.250991] rcu_read_lock_any_held+0x30/0xc0 [ 159.255360] kretprobe_dispatcher+0xc4/0xf0 [ 159.259555] __kretprobe_trampoline_handler+0xc0/0x150 [ 159.264710] trampoline_probe_handler+0x38/0x58 [ 159.269255] kretprobe_trampoline+0x70/0xc4 [ 159.273450] run_rebalance_domains+0x54/0x80 [ 159.277734] __do_softirq+0x164/0x684 [ 159.281406] irq_exit+0x198/0x1b8 [ 159.284731] __handle_domain_irq+0x70/0xc8 [ 159.288840] gic_handle_irq+0xb0/0xf0 [ 159.292510] el1_irq+0xb4/0x180 [ 159.295658] arch_cpu_idle+0x18/0x28 [ 159.299245] default_idle_call+0x9c/0x3e8 [ 159.303265] do_idle+0x25c/0x2a8 [ 159.306502] cpu_startup_entry+0x2c/0x78 [ 159.310436] secondary_start_kernel+0x160/0x198 [ 159.314984] Code: d42000c0 aa1e03e9 d42000c0 aa1e03e9 (d42000c0) After a bit of head scratching and debugging it turned out that it is due to kprobe handler being interrupted by a tick that causes us to go into (I think another) kprobe handler. The culprit was kprobe_breakpoint_ss_handler() returning DBG_HOOK_ERROR which leads to the Unexpected kernel BRK exception. Reverting commit ba090f9cafd5 ("arm64: kprobes: Remove redundant kprobe_step_ctx") seemed to fix the problem for me. Further analysis showed that kcb->kprobe_status is set to KPROBE_REENTER when the error occurs. By teaching kprobe_breakpoint_ss_handler() to handle this status I can no longer reproduce the problem. Fixes: ba090f9cafd5 ("arm64: kprobes: Remove redundant kprobe_step_ctx") Signed-off-by: Qais Yousef <qais.yousef@arm.com> Acked-by: Will Deacon <will@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Link: https://lore.kernel.org/r/20210122110909.3324607-1-qais.yousef@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-01-22Merge tag 'at91-dt-5.12' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt AT91 DT for 5.12: - removing a property never documented nor used - adding i2c recovery GPI for one more board * tag 'at91-dt-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sama5d2: remove atmel,wakeup-type references ARM: dts: at91-sama5d27_wlsom1: add i2c recovery Link: https://lore.kernel.org/r/20210122145056.171283-1-nicolas.ferre@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-22Merge tag 'at91-defconfig-5.12' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig AT91 defconfig for 5.12: - remove ATMEL_TCLIB as the driver was deleted * tag 'at91-defconfig-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: configs: multi_{v5,v7}: remove ATMEL_TCLIB ARM: configs: at91: remove ATMEL_TCLIB Link: https://lore.kernel.org/r/20210122144638.170565-1-nicolas.ferre@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-22ARM: multi_v7_defconfig: Enable Actions Semi platform and driversManivannan Sadhasivam
The support for Actions Semi ARM32 platform has matured enough in the mainline. So let's enable it in multi_v7_defconfig along with the relevant drivers. The platform can now boot a distro from eMMC or uSD without any out of tree patch. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210121061447.26517-1-manivannan.sadhasivam@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-22Merge tag 'socfpga_dts_update_for_v5.12' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA DTS updates for v5.12 - Add DTS file for eASIC N5X platform - Use generic ngpios in GPIO entries - Add PMU node for Arria10 * tag 'socfpga_dts_update_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: dts: arria10: add PMU node arm64: dts: n5x: Add support for Intel's eASIC N5X platform arm64: dts: socfpga: Use generic "ngpios" rather than "snps,nr-gpios" Link: https://lore.kernel.org/r/20210120012334.25730-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-22MIPS: make kgdb depend on FPU supportArnd Bergmann
kgdb fails to build when the FPU support is disabled: arch/mips/kernel/kgdb.c: In function 'dbg_set_reg': arch/mips/kernel/kgdb.c:147:35: error: 'struct thread_struct' has no member named 'fpu' 147 | memcpy((void *)&current->thread.fpu.fcr31, mem, | ^ arch/mips/kernel/kgdb.c:155:34: error: 'struct thread_struct' has no member named 'fpu' 155 | memcpy((void *)&current->thread.fpu.fpr[fp_reg], mem, This is only relevant for CONFIG_EXPERT=y, so disallowing it in Kconfig is an easier workaround than fixing it properly. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-22MIPS: jazz: always allow little-endian buildsArnd Bergmann
The kernel test robot keeps reporting the same bug when it shows up in new files after random unrelated patches: In file included from arch/mips/include/uapi/asm/byteorder.h:13, from arch/mips/include/asm/bitops.h:20, from include/linux/bitops.h:26, from include/linux/kernel.h:12, from include/linux/clk.h:13, from drivers/base/regmap/regmap-mmio.c:7: include/linux/byteorder/big_endian.h:8:2: warning: #warning inconsistent configuration, needs CONFIG_CPU_BIG_ENDIAN [-Wcpp] 8 | #warning inconsistent configuration, needs CONFIG_CPU_BIG_ENDIAN | ^~~~~~~ drivers/base/regmap/regmap-mmio.c: In function 'regmap_mmio_gen_context': >> drivers/base/regmap/regmap-mmio.c:274:2: error: duplicate case value 274 | case REGMAP_ENDIAN_NATIVE: | ^~~~ drivers/base/regmap/regmap-mmio.c:246:2: note: previously used here 246 | case REGMAP_ENDIAN_NATIVE: The problem is that some randconfig builds end up on the MIPS jazz platform with neither CONFIG_CPU_BIG_ENDIAN nor CONFIG_CPU_LITTLE_ENDIAN because no specific machine is selected. As it turns out, all jazz machines support little-endian kernels, so this can simply be allowed globally. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-22arm64: dts: ti: k3: mmc: fix dtbs_check warningsGrygorii Strashko
Now the dtbs_check produces below warnings sdhci@4f80000: clock-names:0: 'clk_ahb' was expected sdhci@4f80000: clock-names:1: 'clk_xin' was expected $nodename:0: 'sdhci@4f80000' does not match '^mmc(@.*)?$' Fix above warnings by updating mmc DT definitions to follow sdhci-am654.yaml bindings: - rename sdhci dt nodes to 'mmc@' - swap clk_xin/clk_ahb clocks, the clk_ahb clock expected to be defined first Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Suman Anna <s-anna@ti.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20210115193016.5581-1-grygorii.strashko@ti.com
2021-01-22ARM: dts: at91: sama5d2: remove atmel,wakeup-type referencesClaudiu Beznea
atmel,wakeup-type DT property is not referenced anywhere in the current and previous version of the code thus remove it. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Nicolas Ferre <nferre@kernel.org> Link: https://lore.kernel.org/r/1609845525-10766-1-git-send-email-claudiu.beznea@microchip.com
2021-01-22ARM: dts: at91-sama5d27_wlsom1: add i2c recoveryNicolas Ferre
Add the i2c gpio pinctrls to support the i2c bus recovery on this board. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lore.kernel.org/r/20210117183558.5369-1-nicolas.ferre@microchip.com
2021-01-22MIPS: Make definitions of MIPSInst_FMA_{FUNC,FMTM} consistent with MIPS64 manualTiezhu Yang
The kernel definitions of MIPSInst_FMA_FUNC and MIPSInst_FMA_FFMT are not consistent with MADD.fmt, NMADD.fmt and NMSUB.fmt in the MIPS64 manual [1], the field func is bit 5..3 and fmt is bit 2..0, fix them. Otherwise there exists error when add new instruction simulation. [1] https://www.mips.com/?do-download=the-mips64-instruction-set-v6-06 Reported-by: Ming Wang <wangming01@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-22mips: Add N64 machine typeLauri Kasanen
Add support for the Nintendo 64. Signed-off-by: Lauri Kasanen <cand@gmx.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-22Revert "MIPS: Remove unused R4300 CPU support"Lauri Kasanen
This reverts commit f9065b54d437c4660e3d974ad9ce5188c068cd76. We're adding Nintendo 64 support, so the VR4300 is no longer unused. Signed-off-by: Lauri Kasanen <cand@gmx.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-22MIPS: mm: Add prototype for function __update_cacheYanteng Si
This commit adds a prototype to fix error at W=1: arch/mips/mm/cache.c:129:6: error: no previous prototype for '__update_cache' [-Werror=missing-prototypes] Signed-off-by: Yanteng Si <siyanteng@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-01-22MIPS: mm: abort uaccess retries upon fatal signalThomas Bogendoerfer
When there's a fatal signal pending, MIPS's do_page_fault() implementation returns. The intent is that we'll return to the faulting userspace instruction, delivering the signal on the way. However, if we take a fatal signal during fixing up a uaccess, this results in a return to the faulting kernel instruction, which will be instantly retried, resulting in the same fault being taken forever. As the task never reaches userspace, the signal is not delivered, and the task is left unkillable. While the task is stuck in this state, it can inhibit the forward progress of the system. To avoid this, we must ensure that when a fatal signal is pending, we apply any necessary fixup for a faulting kernel instruction. Thus we will return to an error path, and it is up to that code to make forward progress towards delivering the fatal signal. [ Description taken from commit 746a272e4414 ("ARM: 8692/1: mm: abort uaccess retries upon fatal signal") ] Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Mark Rutland <mark.rutland@arm.com>
2021-01-22arch: mips: Remove CONFIG_OPROFILE supportViresh Kumar
The "oprofile" user-space tools don't use the kernel OPROFILE support any more, and haven't in a long time. User-space has been converted to the perf interfaces. Remove the old oprofile's architecture specific support. Suggested-by: Christoph Hellwig <hch@infradead.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Robert Richter <rric@kernel.org> Acked-by: William Cohen <wcohen@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2021-01-22arch: microblaze: Remove CONFIG_OPROFILE supportViresh Kumar
The "oprofile" user-space tools don't use the kernel OPROFILE support any more, and haven't in a long time. User-space has been converted to the perf interfaces. Remove the old oprofile's architecture specific support. Suggested-by: Christoph Hellwig <hch@infradead.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Robert Richter <rric@kernel.org> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: William Cohen <wcohen@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2021-01-22arch: ia64: Remove rest of perfmon supportViresh Kumar
Perfmon support (used by oprofile earlier) was removed by commit ecf5b72d5f66 ("ia64: Remove perfmon") earlier, but it missed few files to remove/update. Clean it up. Suggested-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Robert Richter <rric@kernel.org> Acked-by: William Cohen <wcohen@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2021-01-22arch: ia64: Remove CONFIG_OPROFILE supportViresh Kumar
The "oprofile" user-space tools don't use the kernel OPROFILE support any more, and haven't in a long time. User-space has been converted to the perf interfaces. Also note that ia64 supports oprofile but not perf and profiling shouldn't be working anyway currently. Remove the old oprofile's architecture specific support. Suggested-by: Christoph Hellwig <hch@infradead.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Robert Richter <rric@kernel.org> Acked-by: William Cohen <wcohen@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2021-01-22arch: hexagon: Don't select HAVE_OPROFILEViresh Kumar
The "oprofile" user-space tools don't use the kernel OPROFILE support any more, and haven't in a long time. User-space has been converted to the perf interfaces. Don't select HAVE_OPROFILE for hexagon anymore. Suggested-by: Christoph Hellwig <hch@infradead.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Robert Richter <rric@kernel.org> Acked-by: Brian Cain <bcain@codeaurora.org> Acked-by: William Cohen <wcohen@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2021-01-22arch: arc: Remove CONFIG_OPROFILE supportViresh Kumar
The "oprofile" user-space tools don't use the kernel OPROFILE support any more, and haven't in a long time. User-space has been converted to the perf interfaces. Remove the old oprofile's architecture specific support. Suggested-by: Christoph Hellwig <hch@infradead.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Robert Richter <rric@kernel.org> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: William Cohen <wcohen@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2021-01-22arch: arm: Remove CONFIG_OPROFILE supportViresh Kumar
The "oprofile" user-space tools don't use the kernel OPROFILE support any more, and haven't in a long time. User-space has been converted to the perf interfaces. Remove the old oprofile's architecture specific support. Suggested-by: Christoph Hellwig <hch@infradead.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Robert Richter <rric@kernel.org> Acked-by: William Cohen <wcohen@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2021-01-22arch: alpha: Remove CONFIG_OPROFILE supportViresh Kumar
The "oprofile" user-space tools don't use the kernel OPROFILE support any more, and haven't in a long time. User-space has been converted to the perf interfaces. Remove the old oprofile's architecture specific support. Suggested-by: Christoph Hellwig <hch@infradead.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Robert Richter <rric@kernel.org> Acked-by: William Cohen <wcohen@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2021-01-21arm64: dts: qcom: sdm845: kill IPA modem-remoteproc propertyAlex Elder
The "modem-remoteproc" property is no longer required for the IPA driver, so get rid of it. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-21arm64: dts: qcom: sc7180: kill IPA modem-remoteproc propertyAlex Elder
The "modem-remoteproc" property is no longer required for the IPA driver, so get rid of it. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-23 03:19:56 +0000