| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 CPUID cleanup from Borislav Petkov:
"Assign a dedicated feature word to a CPUID leaf which is widely used"
* tag 'x86_cpu_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpufeatures: Assign dedicated feature word for CPUID_0x8000001F[EAX]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 FPU updates from Borislav Petkov:
"x86 fpu usage optimization and cleanups:
- make 64-bit kernel code which uses 387 insns request a x87 init
(FNINIT) explicitly when using the FPU
- misc cleanups"
* tag 'x86_fpu_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu/xstate: Use sizeof() instead of a constant
x86/fpu/64: Don't FNINIT in kernel_fpu_begin()
x86/fpu: Make the EFI FPU calling convention explicit
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode cleanup from Borislav Petkov:
"Make the driver init function static again"
* tag 'x86_microcode_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Make microcode_init() static
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 misc updates from Borislav Petkov:
- Complete the MSR write filtering by applying it to the MSR ioctl
interface too.
- Other misc small fixups.
* tag 'x86_misc_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/MSR: Filter MSR writes through X86_IOC_WRMSR_REGS ioctl too
selftests/fpu: Fix debugfs_simple_attr.cocci warning
selftests/x86: Use __builtin_ia32_read/writeeflags
x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirk
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm cleanups from Borislav Petkov:
- PTRACE_GETREGS/PTRACE_PUTREGS regset selection cleanup
- Another initial cleanup - more to follow - to the fault handling
code.
- Other minor cleanups and corrections.
* tag 'x86_mm_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/{fault,efi}: Fix and rename efi_recover_from_page_fault()
x86/fault: Don't run fixups for SMAP violations
x86/fault: Don't look for extable entries for SMEP violations
x86/fault: Rename no_context() to kernelmode_fixup_or_oops()
x86/fault: Bypass no_context() for implicit kernel faults from usermode
x86/fault: Split the OOPS code out from no_context()
x86/fault: Improve kernel-executing-user-memory handling
x86/fault: Correct a few user vs kernel checks wrt WRUSS
x86/fault: Document the locking in the fault_signal_pending() path
x86/fault/32: Move is_f00f_bug() to do_kern_addr_fault()
x86/fault: Fold mm_fault_error() into do_user_addr_fault()
x86/fault: Skip the AMD erratum #91 workaround on unaffected CPUs
x86/fault: Fix AMD erratum #91 errata fixup for user code
x86/Kconfig: Remove HPET_EMULATE_RTC depends on RTC
x86/asm: Fixup TASK_SIZE_MAX comment
x86/ptrace: Clean up PTRACE_GETREGS/PTRACE_PUTREGS regset selection
x86/vm86/32: Remove VM86_SCREEN_BITMAP support
x86: Remove definition of DEBUG
x86/entry: Remove now unused do_IRQ() declaration
x86/mm: Remove duplicate definition of _PAGE_PAT_LARGE
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 paravirt updates from Borislav Petkov:
"Part one of a major conversion of the paravirt infrastructure to our
kernel patching facilities and getting rid of the custom-grown ones"
* tag 'x86_paravirt_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pv: Rework arch_local_irq_restore() to not use popf
x86/xen: Drop USERGS_SYSRET64 paravirt call
x86/pv: Switch SWAPGS to ALTERNATIVE
x86/xen: Use specific Xen pv interrupt entry for DF
x86/xen: Use specific Xen pv interrupt entry for MCE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Borislav Petkov:
- Convert geode drivers to look up the LED controls from a GPIO machine
descriptor table.
- Remove arch/x86/platform/goldfish as it is not used by the android
emulator anymore.
* tag 'x86_platform_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform/geode: Convert alix LED to GPIO machine descriptor
x86/platform/geode: Convert geode LED to GPIO machine descriptor
x86/platform/geode: Convert net5501 LED to GPIO machine descriptor
x86/platform: Retire arch/x86/platform/goldfish
x86/platform/intel-mid: Convert comma to semicolon
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV-ES fix from Borislav Petkov:
"Do not unroll string I/O for SEV-ES guests because they support it"
* tag 'x86_seves_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev-es: Do not unroll string I/O for SEV-ES guests
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SGX fixes from Borislav Petkov:
"Random small fixes which missed the initial SGX submission. Also, some
procedural clarifications"
* tag 'x86_sgx_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Add Dave Hansen as reviewer for INTEL SGX
x86/sgx: Drop racy follow_pfn() check
MAINTAINERS: Fix the tree location for INTEL SGX patches
x86/sgx: Fix the return type of sgx_init()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Ard Biesheuvel via Borislav Petkov:
"A few cleanups left and right, some of which were part of a initrd
measured boot series that needs some more work, and so only the
cleanup patches have been included for this release"
* tag 'efi-next-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/arm64: Update debug prints to reflect other entropy sources
efi: x86: clean up previous struct mm switching
efi: x86: move mixed mode stack PA variable out of 'efi_scratch'
efi/libstub: move TPM related prototypes into efistub.h
efi/libstub: fix prototype of efi_tcg2_protocol::get_event_log()
efi/libstub: whitespace cleanup
efi: ia64: move IA64-only declarations to new asm/efi.h header
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- move therm_throt.c to the thermal framework, where it belongs.
- identify CPUs which miss to enter the broadcast handler, as an
additional debugging aid.
* tag 'ras_updates_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
thermal: Move therm_throt there from x86/mce
x86/mce: Get rid of mcheck_intel_therm_init()
x86/mce: Make mce_timed_out() identify holdout CPUs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann:
"After the last release contained a surprising amount of new 32-bit
machines, this time two thirds of the code changes are for 64-bit.
The usual updates to existing files include:
- Device tree compiler warning fixes for Berlin, Renesas, SoCFPGA,
nomadik, stm32, Allwinner, TI Keystone
- Support for additional devices on existing machines on Renesas,
SoCFPGA, at91, hisilicon, OMAP, Tegra, TI K3, Allwinner, Broadcom,
ux500, Mediatek, Marvell Armada, Marvell MMP, ZynqMP, AMLogic,
Qualcomm, i.MX, Layerscape, Actions, ASpeed, Toshiba
- Cleanups and minor fixes for Renesas, at91, mstar, ux500, Samsung,
stm32, Tegra, Broadcom, Mediatek, Marvell MMP, AMLogic, Qualcomm,
i.MX, Rockchip, ASpeed, Zynq
Only three new SoCs this time, but a number of boards across:
Renesas:
- Two Beacon EmbeddedWorks boards (RZ/G2H and RZ/G2N based)
Intel SoCFPGA:
- eASIC N5X board (N5X)
ST-Ericsson Ux500:
- Samsung GT-I9070 (Janice) phone (u8500)
TI OMAP:
- MYIR Tech Limited development board (AM335X)
Allwinner/sunxi:
- SL631 Action Camera (V3)
- PineTab Early Adopter tablet (A64)
Broadcom:
- BCM4906 networking chip
- Netgear R8000P router (BCM4906)
AMLogic:
- Hardkernel ODROID-HC4 development board (SM1)
- Beelink GS-King-X TV Box (S922X)
Qualcomm:
- Snapdragon 888 / SM8350 high-end phone SoC
- Qualcomm SDX55 5G modem as standalone SoC
- Snapdragon MTP reference board (SM8350)
- Snapdragon MTP reference board (SDX55)
- Sony Kitakami phones: Xperia Z3+/Z4/Z5 (APQ8094)
- Alcatel Idol 3 phone (MSM8916)
- ASUS Zenfone 2 Laser phone (MSM8916)
- BQ Aquaris X5 aka Longcheer L8910 phone (MSM8916)
- OnePlus6 phone (SDM845)
- OnePlus6T phone (SDM845)
- Alfa Network AP120C-AC access point (IPQ4018)
NXP i.MX6 (32-bit):
- Plymovent BAS base system controller for filter systems (imx6dl)
- Protonic MVT industrial touchscreen terminals (imx6dl)
- Protonic PRTI6G reference board (imx6ul)
- Kverneland UT1, UT1Q, UT1P, TGO agricultural terminals (imx6q/dl/qp)
NXP i.MX8 (64-bit)
- Beacon i.MX8M Nano development kit (imx8mn)
- Boundary Devices i.MX8MM Nitrogen SBC (imx8mm)
- Gateworks Venice i.MX 8M Mini Development Kits (imx8mm)
- phyBOARD-Pollux-i.MX8MP (imx8mp)
- Purism Librem5 Evergreen phone (imx8mp)
- Kontron SMARC-sAL28 system-on-module(imx8mp)
Rockchip:
- NanoPi M4B Single-board computer (RK3399)
- Radxa Rock Pi E router SBC (RK3328)
ASpeed:
- Ampere Mt. Jade, a BMC for an x86 server (AST2500)
- IBM Everest, a BMC for a Power10 server (AST2600)
- Supermicro x11spi, a BMC for an ARM server (AST2500)
Zynq:
- Ebang EBAZ4205, FPGA board (Zynq-7000)
- ZynqMP zcu104 revC reference platform (ZynqMP)"
* tag 'arm-dt-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (584 commits)
ARM: dts: aspeed: align GPIO hog names with dtschema
ARM: dts: aspeed: fix PCA95xx GPIO expander properties on Portwell
dt-bindings: spi: zynq: Convert Zynq QSPI binding to yaml
arm: dts: visconti: Add DT support for Toshiba Visconti5 GPIO driver
ARM: dts: aspeed: ast2600evb: Add enable ehci and uhci
ARM: dts: aspeed: mowgli: Add i2c rtc device
ARM: dts: aspeed: amd-ethanolx: Enable secondary LPC snooping address
dt-bindings: arm: xilinx: Add missing Zturn boards
ARM: dts: ebaz4205: add pinctrl entries for switches
ARM: dts: add Ebang EBAZ4205 device tree
dt-bindings: arm: add Ebang EBAZ4205 board
dt-bindings: add ebang vendor prefix
ARM: dts: aspeed: Add Everest BMC machine
ARM: dts: aspeed: inspur-fp5280g2: Add ipsps1 driver
ARM: dts: aspeed: inspur-fp5280g2: Add GPIO line names
ARM: dts: aspeed: Add Supermicro x11spi BMC machine
ARM: dts: aspeed: g220a: Fix some gpio
ARM: dts: aspeed: g220a: Enable ipmb
ARM: dts: aspeed: rainier: Add eMMC clock phase compensation
ARM: dts: aspeed: Add LCLK to lpc-snoop
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"As usual, a number of additional device drivers that were added to the
kernel are now enabled in the respective configuration files.
A few of the files get updated to match the current Kconfig files for
removed or renamed options"
* tag 'arm-defconfig-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
ARM: configs: sama5_defconfig: add QSPI driver
ARM: configs: at91_dt_defconfig: add ov7740 module
ARM: configs: at91_dt_defconfig: add useful helper options
ARM: configs: at91: DT/ATAG defconfig modifications
ARM: configs: sama5_defconfig: update and remove unneeded options
ARM: configs: at91: enable drivers for sam9x60
arm64: defconfig: Enable RT5659
arm64: configs: Support DEVAPC on MediaTek platforms
arm64: configs: Support pwrap on Mediatek MT6779 platform
arm64: defconfig: Enable PF8x00 as builtin
ARM: multi_v7_defconfig: add STM32 CEC support
arm64: defconfig: Enable vibra-pwm
ARM: omap2plus_defconfig: Update for dropped options
ARM: omap2plus_defconfig: Update for moved options
ARM: multi_v7_defconfig: Enable nvmem's rmem driver
arm64: defconfig: Enable nvmem's rmem driver
ARM: multi_v7_defconfig: Enable support for the ADC thermal sensor
ARM: qcom_defconfig: Enable Command DB driver
ARM: qcom_defconfig: Enable RPMh power domain driver
ARM: qcom_defconfig: Enable ARM PSCI support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"This is mostly 32-bit code for SoC platforms, and looks smaller than
any such branch I remember from previous kernels, as most of this is
now handled in other subsystems for modern platforms:
- Minor bugfixes and Kconfig updates for Tegra, Broadcom, i.MX,
Renesas, and Samsung
- Updates to the MAINTAINERS listing for Actions, OMAP, and Samsung
- Samsung SoC driver updates to make them loadable modules"
* tag 'arm-soc-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: arm: samsung: include S3C headers in platform entry
MAINTAINERS: Add linux-actions ML for Actions Semi Arch
ARM: s3c: irq-s3c24xx: staticize local functions
ARM: s3c: irq-s3c24xx: include headers for missing declarations
ARM: s3c: fix fiq for clang IAS
ARM: imx: Remove unused IMX_GPIO_NR() macro
soc: renesas: rcar-sysc: Mark device node OF_POPULATED after init
ARM: OMAP2+: fix spellint typo
MAINTAINERS: Update address for OMAP GPMC driver
soc: renesas: rcar-sysc: Use readl_poll_timeout_atomic()
ARM: bcm: Select BRCMSTB_L2_IRQ for bcm2835
ARM: brcmstb: Add debug UART entry for 72116
ARM: tegra: Don't enable unused PLLs on resume from suspend
soc: samsung: pm_domains: Convert to regular platform driver
soc: samsung: exynos-chipid: correct helpers __init annotation
ARM: mach-imx: imx6ul: Print SOC revision on boot
ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup
soc: samsung: exynos-chipid: convert to driver and merge exynos-asv
soc: samsung: exynos-asv: handle reading revision register error
soc: samsung: exynos-asv: don't defer early on not-supported SoCs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform removals from Arnd Bergmann:
"There are a lot of platforms that have not seen any interesting code
changes in the past five years or more.
I made a list and asked around which ones are no longer in use, and
received confirmation about six ARM platforms and the TI C6x
architecture that have all reached the end of their life upstream,
with no known users remaining:
- efm32 - added in 2011, first Cortex-M, no notable changes after 2013
- picoxcell - added in 2011, abandoned after 2012 acquisition
- prima2 - added in 20111, no notable changes since 2015
- tango - added in 2015, sporadic changes until 2017, but abandoned
- u300 - added in 2009, no notable changes since 2013
- zx - added in 2015 for both 32, 2017 for 64 bit, no notable changes
- arch/c6x - added in 2011, but work stalled soon after that
A number of other platforms on the original list turned out to still
have users. In some cases there are out-of-tree patches and users that
plan to contribute them in the future, in other cases the code is
complete and works reliably"
Link: https://lore.kernel.org/lkml/CAK8P3a2DZ8xQp7R=H=wewHnT2=a_=M53QsZOueMVEf7tOZLKNg@mail.gmail.com/
* tag 'arm-platform-removal-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: remove u300 platform
ARM: remove tango platform
ARM: remove zte zx platform
ARM: remove sirf prima2/atlas platforms
c6x: remove architecture
MAINTAINERS: Remove deleted platform efm32
ARM: drop efm32 platform
ARM: Remove PicoXcell platform support
ARM: dts: Remove PicoXcell platforms
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are only two left-over remaining non-urgent ARM SoC bug fixes:
- A build fix for the Atmel SAM9 platform to allow building with the
clang integrated assembler
- A DT fix for ethernet on Intel SoCFPGA, this has been broken since
it was added in v5.4"
* tag 'arm-fixes-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: at91: use proper asm syntax in pm_suspend
arm64: dts: agilex: fix phy interface bit shift for gmac1 and gmac2
|
|
Pull networking updates from David Miller:
"Here is what we have this merge window:
1) Support SW steering for mlx5 Connect-X6Dx, from Yevgeny Kliteynik.
2) Add RSS multi group support to octeontx2-pf driver, from Geetha
Sowjanya.
3) Add support for KS8851 PHY. From Marek Vasut.
4) Add support for GarfieldPeak bluetooth controller from Kiran K.
5) Add support for half-duplex tcan4x5x can controllers.
6) Add batch skb rx processing to bcrm63xx_enet, from Sieng Piaw
Liew.
7) Rework RX port offload infrastructure, particularly wrt, UDP
tunneling, from Jakub Kicinski.
8) Add BCM72116 PHY support, from Florian Fainelli.
9) Remove Dsa specific notifiers, they are unnecessary. From Vladimir
Oltean.
10) Add support for picosecond rx delay in dwmac-meson8b chips. From
Martin Blumenstingl.
11) Support TSO on xfrm interfaces from Eyal Birger.
12) Add support for MP_PRIO to mptcp stack, from Geliang Tang.
13) Support BCM4908 integrated switch, from Rafał Miłecki.
14) Support for directly accessing kernel module variables via module
BTF info, from Andrii Naryiko.
15) Add DASH (esktop and mobile Architecture for System Hardware)
support to r8169 driver, from Heiner Kallweit.
16) Add rx vlan filtering to dpaa2-eth, from Ionut-robert Aron.
17) Add support for 100 base0x SFP devices, from Bjarni Jonasson.
18) Support link aggregation in DSA, from Tobias Waldekranz.
19) Support for bitwidse atomics in bpf, from Brendan Jackman.
20) SmartEEE support in at803x driver, from Russell King.
21) Add support for flow based tunneling to GTP, from Pravin B Shelar.
22) Allow arbitrary number of interconnrcts in ipa, from Alex Elder.
23) TLS RX offload for bonding, from Tariq Toukan.
24) RX decap offklload support in mac80211, from Felix Fietkou.
25) devlink health saupport in octeontx2-af, from George Cherian.
26) Add TTL attr to SCM_TIMESTAMP_OPT_STATS, from Yousuk Seung
27) Delegated actionss support in mptcp, from Paolo Abeni.
28) Support receive timestamping when doin zerocopy tcp receive. From
Arjun Ray.
29) HTB offload support for mlx5, from Maxim Mikityanskiy.
30) UDP GRO forwarding, from Maxim Mikityanskiy.
31) TAPRIO offloading in dsa hellcreek driver, from Kurt Kanzenbach.
32) Weighted random twos choice algorithm for ipvs, from Darby Payne.
33) Fix netdev registration deadlock, from Johannes Berg.
34) Various conversions to new tasklet api, from EmilRenner Berthing.
35) Bulk skb allocations in veth, from Lorenzo Bianconi.
36) New ethtool interface for lane setting, from Danielle Ratson.
37) Offload failiure notifications for routes, from Amit Cohen.
38) BCM4908 support, from Rafał Miłecki.
39) Support several new iwlwifi chips, from Ihab Zhaika.
40) Flow drector support for ipv6 in i40e, from Przemyslaw Patynowski.
41) Support for mhi prrotocols, from Loic Poulain.
42) Optimize bpf program stats.
43) Implement RFC6056, for better port randomization, from Eric
Dumazet.
44) hsr tag offloading support from George McCollister.
45) Netpoll support in qede, from Bhaskar Upadhaya.
46) 2005/400g speed support in bonding 3ad mode, from Nikolay
Aleksandrov.
47) Netlink event support in mptcp, from Florian Westphal.
48) Better skbuff caching, from Alexander Lobakin.
49) MRP (Media Redundancy Protocol) offloading in DSA and a few
drivers, from Horatiu Vultur.
50) mqprio saupport in mvneta, from Maxime Chevallier.
51) Remove of_phy_attach, no longer needed, from Florian Fainelli"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1766 commits)
octeontx2-pf: Fix otx2_get_fecparam()
cteontx2-pf: cn10k: Prevent harmless double shift bugs
net: stmmac: Add PCI bus info to ethtool driver query output
ptp: ptp_clockmatrix: clean-up - parenthesis around a == b are unnecessary
ptp: ptp_clockmatrix: Simplify code - remove unnecessary `err` variable.
ptp: ptp_clockmatrix: Coding style - tighten vertical spacing.
ptp: ptp_clockmatrix: Clean-up dev_*() messages.
ptp: ptp_clockmatrix: Remove unused header declarations.
ptp: ptp_clockmatrix: Add alignment of 1 PPS to idtcm_perout_enable.
ptp: ptp_clockmatrix: Add wait_for_sys_apll_dpll_lock.
net: stmmac: dwmac-sun8i: Add a shutdown callback
net: stmmac: dwmac-sun8i: Minor probe function cleanup
net: stmmac: dwmac-sun8i: Use reset_control_reset
net: stmmac: dwmac-sun8i: Remove unnecessary PHY power check
net: stmmac: dwmac-sun8i: Return void from PHY unpower
r8169: use macro pm_ptr
net: mdio: Remove of_phy_attach()
net: mscc: ocelot: select PACKING in the Kconfig
net: re-solve some conflicts after net -> net-next merge
net: dsa: tag_rtl4_a: Support also egress tags
...
|
|
These plt* and .text.ftrace_trampoline sections specified for arm64 have
non-zero addressses. Non-zero section addresses in a relocatable ELF would
confuse GDB when it tries to compute the section offsets and it ends up
printing wrong symbol addresses. Therefore, set them to zero, which mirrors
the change in commit 5d8591bc0fba ("module: set ksymtab/kcrctab* section
addresses to 0x0").
Reported-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Shaoying Xu <shaoyi@amazon.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210216183234.GA23876@amazon.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
in function create_dtb(), if fdt_open_into() fails, we need to vfree
buf before return.
Fixes: 52b2a8af7436 ("arm64: kexec_file: load initrd and device-tree")
Cc: stable@vger.kernel.org # v5.0
Signed-off-by: qiuguorui1 <qiuguorui1@huawei.com>
Link: https://lore.kernel.org/r/20210218125900.6810-1-qiuguorui1@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The Spectre-v4 workaround is re-configured when resuming from suspend,
as the firmware may have re-enabled the mitigation despite the user
previously asking for it to be disabled.
Enabling or disabling the workaround can result in an undefined
instruction exception on CPUs which implement PSTATE.SSBS but only allow
it to be configured by adjusting the SPSR on exception return. We handle
this by installing an 'undef hook' which effectively emulates the access.
Installing this hook requires us to take a couple of spinlocks both to
avoid corrupting the internal list of hooks but also to ensure that we
don't run into an unhandled exception. Unfortunately, when resuming from
suspend, we haven't yet called rcu_idle_exit() and so lockdep gets angry
about "suspicious RCU usage". In doing so, it tries to print a warning,
which leads it to get even more suspicious, this time about itself:
| rcu_scheduler_active = 2, debug_locks = 1
| RCU used illegally from extended quiescent state!
| 1 lock held by swapper/0:
| #0: (logbuf_lock){-.-.}-{2:2}, at: vprintk_emit+0x88/0x198
|
| Call trace:
| dump_backtrace+0x0/0x1d8
| show_stack+0x18/0x24
| dump_stack+0xe0/0x17c
| lockdep_rcu_suspicious+0x11c/0x134
| trace_lock_release+0xa0/0x160
| lock_release+0x3c/0x290
| _raw_spin_unlock+0x44/0x80
| vprintk_emit+0xbc/0x198
| vprintk_default+0x44/0x6c
| vprintk_func+0x1f4/0x1fc
| printk+0x54/0x7c
| lockdep_rcu_suspicious+0x30/0x134
| trace_lock_acquire+0xa0/0x188
| lock_acquire+0x50/0x2fc
| _raw_spin_lock+0x68/0x80
| spectre_v4_enable_mitigation+0xa8/0x30c
| __cpu_suspend_exit+0xd4/0x1a8
| cpu_suspend+0xa0/0x104
| psci_cpu_suspend_enter+0x3c/0x5c
| psci_enter_idle_state+0x44/0x74
| cpuidle_enter_state+0x148/0x2f8
| cpuidle_enter+0x38/0x50
| do_idle+0x1f0/0x2b4
Prevent these splats by running __cpu_suspend_exit() with RCU watching.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Suggested-by: "Paul E . McKenney" <paulmck@kernel.org>
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Fixes: c28762070ca6 ("arm64: Rewrite Spectre-v4 mitigation code")
Cc: <stable@vger.kernel.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210218140346.5224-1-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Remove several exports from the MMU that are no longer necessary.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210213005015.1651772-15-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Drop kvm_mmu_slot_largepage_remove_write_access() and refactor its sole
caller to use kvm_mmu_slot_remove_write_access(). Remove the now-unused
slot_handle_large_level() and slot_handle_all_level() helpers.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210213005015.1651772-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Stop setting dirty bits for MMU pages when dirty logging is disabled for
a memslot, as PML is now completely disabled when there are no memslots
with dirty logging enabled.
This means that spurious PML entries will be created for memslots with
dirty logging disabled if at least one other memslot has dirty logging
enabled. However, spurious PML entries are already possible since
dirty bits are set only when a dirty logging is turned off, i.e. memslots
that are never dirty logged will have dirty bits cleared.
In the end, it's faster overall to eat a few spurious PML entries in the
window where dirty logging is being disabled across all memslots.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210213005015.1651772-13-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Currently, if enable_pml=1 PML remains enabled for the entire lifetime
of the VM irrespective of whether dirty logging is enable or disabled.
When dirty logging is disabled, all the pages of the VM are manually
marked dirty, so that PML is effectively non-operational. Setting
the dirty bits is an expensive operation which can cause severe MMU
lock contention in a performance sensitive path when dirty logging is
disabled after a failed or canceled live migration.
Manually setting dirty bits also fails to prevent PML activity if some
code path clears dirty bits, which can incur unnecessary VM-Exits.
In order to avoid this extra overhead, dynamically enable/disable PML
when dirty logging gets turned on/off for the first/last memslot.
Signed-off-by: Makarand Sonare <makarandsonare@google.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210213005015.1651772-12-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a sanity check in kvm_mmu_slot_apply_flags to assert that the
LOG_DIRTY_PAGES flag is indeed being toggled, and explicitly rely on
that holding true when zapping collapsible SPTEs. Manipulating the
CPU dirty log (PML) and write-protection also relies on this assertion,
but that's not obvious in the current code.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210213005015.1651772-11-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Drop the facade of KVM's PML logic being vendor specific and move the
bits that aren't truly VMX specific into common x86 code. The MMU logic
for dealing with PML is tightly coupled to the feature and to VMX's
implementation, bouncing through kvm_x86_ops obfuscates the code without
providing any meaningful separation of concerns or encapsulation.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210213005015.1651772-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Store the vendor-specific dirty log size in a variable, there's no need
to wrap it in a function since the value is constant after
hardware_setup() runs.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210213005015.1651772-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Expand the comment about need to use write-protection for nested EPT
when PML is enabled to clarify that the tagging is a nop when PML is
_not_ enabled. Without the clarification, omitting the PML check looks
wrong at first^Wfifth glance.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210213005015.1651772-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Unconditionally disable PML in vmcs02, KVM emulates PML purely in the
MMU, e.g. vmx_flush_pml_buffer() doesn't even try to copy the L2 GPAs
from vmcs02's buffer to vmcs12. At best, enabling PML is a nop. At
worst, it will cause vmx_flush_pml_buffer() to record bogus GFNs in the
dirty logs.
Initialize vmcs02.GUEST_PML_INDEX such that PML writes would trigger
VM-Exit if PML was somehow enabled, skip flushing the buffer for guest
mode since the index is bogus, and freak out if a PML full exit occurs
when L2 is active.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210213005015.1651772-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When zapping SPTEs in order to rebuild them as huge pages, use the new
helper that computes the max mapping level to detect whether or not a
SPTE should be zapped. Doing so avoids zapping SPTEs that can't
possibly be rebuilt as huge pages, e.g. due to hardware constraints,
memslot alignment, etc...
This also avoids zapping SPTEs that are still large, e.g. if migration
was canceled before write-protected huge pages were shattered to enable
dirty logging. Note, such pages are still write-protected at this time,
i.e. a page fault VM-Exit will still occur. This will hopefully be
addressed in a future patch.
Sadly, TDP MMU loses its const on the memslot, but that's a pervasive
problem that's been around for quite some time.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210213005015.1651772-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pass the memslot to the rmap callbacks, it will be used when zapping
collapsible SPTEs to verify the memslot is compatible with hugepages
before zapping its SPTEs.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210213005015.1651772-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Factor out the logic for determining the maximum mapping level given a
memslot and a gpa. The helper will be used when zapping collapsible
SPTEs when disabling dirty logging, e.g. to avoid zapping SPTEs that
can't possibly be rebuilt as hugepages.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210213005015.1651772-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
HugeTLB pages
Zap SPTEs that are backed by ZONE_DEVICE pages when zappings SPTEs to
rebuild them as huge pages in the TDP MMU. ZONE_DEVICE huge pages are
managed differently than "regular" pages and are not compound pages.
Likewise, PageTransCompoundMap() will not detect HugeTLB, so switch
to PageCompound().
This matches the similar check in kvm_mmu_zap_collapsible_spte.
Cc: Ben Gardon <bgardon@google.com>
Fixes: 14881998566d ("kvm: x86/mmu: Support disabling dirty logging for the tdp MMU")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210213005015.1651772-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Currently, we do local TLB flush on every MM switch. This is very harsh on
performance because we are forcing page table walks after every MM switch.
This patch implements ASID allocator for assigning an ASID to a MM context.
The number of ASIDs are limited in HW so we create a logical entity named
CONTEXTID for assigning to MM context. The lower bits of CONTEXTID are ASID
and upper bits are VERSION number. The number of usable ASID bits supported
by HW are detected at boot-time by writing 1s to ASID bits in SATP CSR.
We allocate new CONTEXTID on first MM switch for a MM context where the
ASID is allocated from an ASID bitmap and VERSION is provide by an atomic
counter. At time of allocating new CONTEXTID, if we run out of available
ASIDs then:
1. We flush the ASID bitmap
2. Increment current VERSION atomic counter
3. Re-allocate ASID from ASID bitmap
4. Flush TLB on all CPUs
5. Try CONTEXTID re-assignment on all CPUs
Please note that we don't use ASID #0 because it is used at boot-time by
all CPUs for initial MM context. Also, newly created context is always
assigned CONTEXTID #0 (i.e. VERSION #0 and ASID #0) which is an invalid
context in our implementation.
Using above approach, we have virtually infinite CONTEXTIDs on-top-of
limited number of HW ASIDs. This approach is inspired from ASID allocator
used for Linux ARM/ARM64 but we have adapted it for RISC-V. Overall, this
ASID allocator helps us reduce rate of local TLB flushes on every CPU
thereby increasing performance.
This patch is tested on QEMU virt machine, Spike and SiFive Unleashed
board. On QEMU virt machine, we see some (3-5% approx) performance
improvement with SW emulated TLBs provided by QEMU. Unfortunately,
the ASID bits of the SATP CSR are not implemented on Spike and SiFive
Unleashed board so we don't see any change in performance. On real HW
having all ASID bits implemented, the performance gains will be much
more due improved sharing of TLB among different processes.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Remove a superfluous semicolon after function definition.
Signed-off-by: Chengyang Fan <cy.fan@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Neither of these are actually correct: the instruction stream is defined
(for versions of the ISA manual newer than 2.2) as a stream of 16-bit
little-endian parcels, which is different than just being little-endian.
In theory we should represent this as a type, but we don't have any
concrete plans for the big endian stuff so it doesn't seem worth the
time -- we've got variants of this all over the place.
Instead I'm just dropping the unnecessary type conversion, which is a
NOP on LE systems but causes an sparse error as the types are all mixed
up.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Acked-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Add the pinctrl-k210.c pinctrl driver for the Canaan Kendryte K210
field programmable IO array (FPIOA) to allow configuring the SoC pin
functions. The K210 has 48 programmable pins which can take any of 256
possible functions.
This patch is inspired from the k210 pinctrl driver for the u-boot
project and contains many direct contributions from Sean Anderson.
The MAINTAINERS file is updated, adding the entry "CANAAN/KENDRYTE K210
SOC FPIOA DRIVER" with myself listed as maintainer for this driver.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
"kerne" -> "kernel"
Signed-off-by: WenZhang <zhangwen@yulong.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
It references to x86/s390 architecture.
So, it doesn't map the early shadow page to cover VMALLOC space.
Prepopulate top level page table for the range that would otherwise be
empty.
lower levels are filled dynamically upon memory allocation while
booting.
Signed-off-by: Nylon Chen <nylon7@andestech.com>
Signed-off-by: Nick Hu <nickhu@andestech.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Covert to the generic reserve_initrd_mem() function.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Sometimes, especially in a production system we may not want to
use a "smart bootloader" like u-boot to load kernel, ramdisk and
device tree from a filesystem on eMMC, but rather load the kernel
from a NAND partition and just run it as soon as we can, and in
this case it is convenient to have device tree compiled into the
kernel binary. Since this case is not limited to MMU-less systems,
let's support it for these which have MMU enabled too.
While at it, provide __dtb_start as a parameter to setup_vm() in
BUILTIN_DTB case, so we don't have to duplicate BUILTIN_DTB specific
processing in MMU-enabled and MMU-disabled versions of setup_vm().
Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
If there is a initramfs linked into the kernel which will be
freed later on there is free memory somewhere between _etext
and _end, thus using _end for min_low_pfn is not correct.
This may lead to issues in dma_capable when checking
'min(addr, end) < phys_to_dma(dev, PFN_PHYS(min_low_pfn)))'
as the address addr might be below min_low_pfn. Picked
find_limits from architecture arm for applying min_low_pfn and
max_low_pfn. Maybe using _etext for min_low_pfn would be
fine too.
Signed-off-by: Andreas Oetken <andreas.oetken@siemens.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
|
|
The tls pointer must be pushed on the stack prior to calling nios2_clone
as it is the 5th function argument. Prior handling of the tls pointer was
done inside former called function copy_thread_tls using the r8 register
from the current_pt_regs directly. This was a bad design and resulted in
the current bug introduced in 04bd52fb.
Fixes: 04bd52fb ("nios2: enable HAVE_COPY_THREAD_TLS, switch to kernel_clone_args")
Signed-off-by: Andreas Oetken <andreas.oetken@siemens.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
We need to take the mmap lock around find_vma() and subsequent use of the
VMA. Otherwise, we can race with concurrent operations like munmap(), which
can lead to use-after-free accesses to freed VMAs.
Fixes: 1000197d8013 ("nios2: System calls handling")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
|
|
Fix several of the same warning by using a GCC statement expression
(extension):
../arch/sparc/include/asm/cmpxchg_32.h:28:22: warning: value computed is not used [-Wunused-value]
28 | #define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
Passes sparc32 allmodconfig with no xchg warnings.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When userspace calls mprotect() to enable ADI on an address range,
do_mprotect_pkey() calls arch_validate_prot() to validate new
protection flags. arch_validate_prot() for sparc looks at the first
VMA associated with address range to verify if ADI can indeed be
enabled on this address range. This has two issues - (1) Address
range might cover multiple VMAs while arch_validate_prot() looks at
only the first VMA, (2) arch_validate_prot() peeks at VMA without
holding mmap lock which can result in race condition.
arch_validate_flags() from commit c462ac288f2c ("mm: Introduce
arch_validate_flags()") allows for VMA flags to be validated for all
VMAs that cover the address range given by user while holding mmap
lock. This patch updates sparc code to move the VMA check from
arch_validate_prot() to arch_validate_flags() to fix above two
issues.
Suggested-by: Jann Horn <jannh@google.com>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Khalid Aziz <khalid.aziz@oracle.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fixes coccicheck warning:
/arch/sparc/mm/srmmu.c:354:42-43: WARNING comparing pointer to 0
Avoid pointer type value compared to 0.
Reported-by: Tosk Robot <tencent_os_robot@tencent.com>
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix Sparc build when CONFIG_PROC_FS is not enabled.
Fixes this build error:
arch/sparc/kernel/led.c:107:30: error: 'led_proc_ops' defined but not used [-Werror=unused-const-variable=]
107 | static const struct proc_ops led_proc_ops = {
| ^~~~~~~~~~~~
cc1: all warnings being treated as errors
Fixes: 97a32539b956 ("proc: convert everything to "struct proc_ops"")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Lars Kotthoff <metalhead@metalhead.ws>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The page has just been allocated, so its refcount is 1. free_unref_page()
is for use on pages which have a zero refcount. Use __free_page()
like the other implementations of pte_alloc_one().
Fixes: 1ae9ae5f7df7 ("sparc: handle pgtable_page_ctor() fail")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently COMPAT on SPARC64 selects COMPAT_BINFMT_ELF unconditionally,
even when BINFMT_ELF is not enabled. This causes a kconfig warning.
Instead, just select COMPAT_BINFMT_ELF if BINFMT_ELF is enabled.
This builds cleanly with no kconfig warnings.
WARNING: unmet direct dependencies detected for COMPAT_BINFMT_ELF
Depends on [n]: COMPAT [=y] && BINFMT_ELF [=n]
Selected by [y]:
- COMPAT [=y] && SPARC64 [=y]
Fixes: 26b4c912185a ("sparc,sparc64: unify Kconfig files")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
