summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2010-02-27MIPS: Alchemy: Fix warnings in DB1x00 / PB1000 / PB1550 board setup codeFlorian Fainelli
This patch fixes warnings due to potentially unused variables in board setup code or mixed variables declaration and code (forbidden by ISO C90). Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: remove unused SYS area structureManuel Lauss
Nothing in-tree uses it, so get rid of it. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: get rid of superfluous UART definitionsManuel Lauss
Remove unused uart bit definitions and base macros. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: prom_putchar is board dependentManuel Lauss
This patch replaces the general alchemy prom_putchar() implementation in favor of board-specific versions: The UART where the output of prom_putchar is directed to really depends on the board, the current implementation hardcodes this on a per-SoC basis which is just wrong. So a generic uart tx function is provided in the alchemy headers, and the boards can provide their own prom_putchar with custom destination uart, and all in-kernel alchemy boards support early printk. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: change dbdma to accept physical memory addressesManuel Lauss
DMA can only be done from physical addresses; move the "virt_to_phys" source/destination buffer address translation from the dbdma queueing functions (since the hardware can only DMA to/from physical addresses) to their respective users. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: remove dbdma compat macrosManuel Lauss
Remove dbdma compat macros, move remaining users over to default queueing functions and -flags. (Queueing function signature has changed in order to give a build failure instead of silent functional changes due to the no longer implicitly specified DDMA_FLAGS_IE flag) Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: reduce size of irq dispatcherManuel Lauss
By replacing an extra do_IRQ with a goto, the assembly shrinks from 260 to 212 bytes (gcc-4.3.4). Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: Stop IRQ name sharingManuel Lauss
Eliminate the sharing of IRQ names among the differenct Alchemy variants. IRQ numbers need no longer be hidden behind a CONFIG_SOC_AU1XXX symbol: step 1 in my quest to make the Alchemy code less reliant on a hardcoded subtype. This patch also renames the GPIO irq number constants. It's really an interrupt line, NOT a GPIO number! Code which relied on certain irq numbers to have the same name across all supported cpu subtypes is changed to determine current cpu subtype at runtime; in some places this isn't possible so a "compat" symbol is used. Run-tested on DB1200. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: Simple cpu subtype detectorManuel Lauss
Extract the alchemy chip variant from c0_prid register. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/14/ Patchwork: http://patchwork.linux-mips.org/patch/707/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: higher priority for system timer.Manuel Lauss
Raise RTCMATCH2 interrupt priority in case it is used as the system timer tick. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: Remove USB_DEV_REQ_INT prioritization hackManuel Lauss
The Alchemy hardware provides a method to prioritize interrupts on a controller by assigning them to a differenct core request line. Assign usb device request interrupt to IC0 Request 0 (which has highest priority in the core and the dispatcher) and others to Request 1. The explicit check for usb device request occurrence should be obsolete now. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: XXS1500 PCMCIA driver rewriteManuel Lauss
Rewritten XXS1500 PCMCIA socket driver, standalone (doesn't depend on au1000_generic.c) and added carddetect IRQ support. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Florian Fainelli <florian@openwrt.org> Cc: Linux-PCMCIA <linux-pcmcia@lists.infradead.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: devboards: wire up new PCMCIA driver.Manuel Lauss
Register the PCMCIA driver on all boards supported by it, get rid of now-unused pcmcia macros in the board headers (and subsequently empty pb1100/pb1500 ones). Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: PCMCIA: new socket driver for Au1000 demoboards.Manuel Lauss
New PCMCIA socket driver for all Db/Pb1xxx boards (except Pb1000), which replaces au1000_db1x00.c and (most of) au1000_pb1x00.c. Notable improvements: - supports Db1000, DB/PB1100/1500/1550/1200. - support for carddetect and statuschange IRQs. - pcmcia socket mem/io/attr areas and irqs passed through platform resource information. - doesn't freeze system during card insertion/ejection like the one it replaces. - boardtype is automatically detected using BCSR ID register. Run-tested on the DB1200. Cc: Linux-PCMCIA <linux-pcmcia@lists.infradead.org> Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: remove board_init_irq() function.Manuel Lauss
remove board_init_irq(): On all in-kernel boards it is sufficient to initialize board interrupts in an arch_initcall by using the default linux irq functions. Some small irqmap.c files have been folded into board_setup files. Run-tested on DB1200; compile-tested on all other affected boards. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: devboards: factor out PB1200 IRQ cascade code.Manuel Lauss
Move the PB1200 IRQ cascade code out to the BCSR support code: upcoming DB1300 support can use it too. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: devboard register abstractionManuel Lauss
All Alchemy development boards have external CPLDs with a few registers in them. They all share an identical register layout with only a few minor differences (except the PB1000) in bit functions and base addresses. This patch - adds a primitive facility to initialize and use these external registers, - replaces all occurrences of bcsr->xxx accesses with calls to the new functions (the pb1200 cascade irq handling code is special). - collects BCSR register information scattered throughout the board headers in a central place. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Fix build error for uncompressed non-plain vmlinux kernelsRalf Baechle
Seen on rm200_defconfig for example: CC arch/mips/boot/compressed/decompress.o /home/ralf/src/linux/upstream-linus/arch/mips/boot/compressed/decompress.c: In function ‘decompress_kernel’: /home/ralf/src/linux/upstream-linus/arch/mips/boot/compressed/decompress.c:116: error: implicit declaration of function ‘decompress’ make[3]: *** [arch/mips/boot/compressed/decompress.o] Error 1 make[2]: *** [vmlinuz.ecoff] Error 2 make[1]: *** [sub-make] Error 2 make: *** [all] Error 2 Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27x86: apic: Fix mismerge, add arch_probe_nr_irqs() againIngo Molnar
Merge commit aef55d4922 mis-merged io_apic.c so we lost the arch_probe_nr_irqs() method. This caused subtle boot breakages (udev confusion likely due to missing drivers) with certain configs. Cc: H. Peter Anvin <hpa@zytor.com> Cc: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <20100207210250.GB8256@jenkins.home.ifup.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-27x86: Enable NMI on all cpus on UVRuss Anderson
Enable NMI on all cpus in UV system and add an NMI handler to dump_stack on each cpu. By default on x86 all the cpus except the boot cpu have NMI masked off. This patch enables NMI on all cpus in UV system and adds an NMI handler to dump_stack on each cpu. This way if a system hangs we can NMI the machine and get a backtrace from all the cpus. Version 2: Use x86_platform driver mechanism for nmi init, per Ingo's suggestion. Version 3: Clean up Ingo's nits. Signed-off-by: Russ Anderson <rja@sgi.com> LKML-Reference: <20100226164912.GA24439@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-27Merge branch 'tracing/core' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into tracing/core
2010-02-26Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (362 commits) V4L-DVB: cx88-dvb: remove extra attribution for core V4L/DVB: v4l: soc_camera: fix bound checking of mbus_fmt[] index V4L/DVB: Add support for SMT7020 to cx88 V4L/DVB: radio-si470x: Use UTF-8 encoding on a comment V4L/DVB: MAINTAINERS: Telegent tlg2300 section fix V4L/DVB: gspca_stv06xx: Add support for camera button V4L/DVB: gspca_ov519: add support for the button on ov511 based cams V4L/DVB: gspca_ov519: Add support for the button on ov518 based cams V4L/DVB: gspca_ov519: add support for the button on ov519 based cams V4L/DVB: gspca_main: Fix a compile error when CONFIG_INPUT is not set V4L/DVB: gspca_main: some input error handling fixes V4L/DVB: gspca_main: Allow use of input device creation code for non int. inputs V4L/DVB: gspca_pac7302: much improved exposure control V4L/DVB: gspca_sonixb: Make sonixb driver handle pas106 and pas202 cameras V4L/DVB: gspca_sonixb: pas106: fixup bright ctrl and add gain and exposure ctrls V4L/DVB: Documentation: gspca.txt: update known mr97310a cams V4L/DVB: gspca_mr97310a: add support for the Sakar 1638x CyberPix V4L/DVB: gscpa_sonixb: limit ov7630 max framerate at 640x480 V4L/DVB: gspca_sonixb: pas202: fixup brightness ctrl and add gain and exposure ctrls V4L/DVB: gscpa_sonixb: Differentiate between sensors with a coarse and fine expo ctrl ...
2010-02-26Merge branch 'kmemcheck-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6 * 'kmemcheck-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: kmemcheck: Test the full object in kmemcheck_is_obj_initialized()
2010-02-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/xfs-viptLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/xfs-vipt: xfs: fix xfs to work with Virtually Indexed architectures sh: add mm API for DMA to vmalloc/vmap areas arm: add mm API for DMA to vmalloc/vmap areas parisc: add mm API for DMA to vmalloc/vmap areas mm: add coherence API for DMA to vmalloc/vmap areas
2010-02-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (187 commits) sh: remove dead LED code for migo-r and ms7724se sh: ecovec build fix for CONFIG_I2C=n sh: ecovec r-standby support sh: ms7724se r-standby support sh: SH-Mobile R-standby register save/restore clocksource: Fix up a registration/IRQ race in the sh drivers. sh: ms7724: modify scan_timing for KEYSC sh: ms7724: Add sh_sir support sh: mach-ecovec24: Add sh_sir support sh: wire up SET/GET_UNALIGN_CTL. sh: allow alignment fault mode to be configured at kernel boot. sh: sh7724: Update FSI/SPU2 clock sh: always enable sh7724 vpu_clk and set to 166MHz on Ecovec sh: add sh7724 kick callback to clk_div4_table sh: introduce struct clk_div4_table sh: clock-cpg div4 set_rate() shift fix sh: Turn on speculative return for SH7785 and SH7786 sh: Merge legacy and dynamic PMB modes. sh: Use uncached I/O helpers in PMB setup. sh: Provide uncached I/O helpers. ...
2010-02-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (31 commits) crypto: aes_generic - Fix checkpatch errors crypto: fcrypt - Fix checkpatch errors crypto: ecb - Fix checkpatch errors crypto: des_generic - Fix checkpatch errors crypto: deflate - Fix checkpatch errors crypto: crypto_null - Fix checkpatch errors crypto: cipher - Fix checkpatch errors crypto: crc32 - Fix checkpatch errors crypto: compress - Fix checkpatch errors crypto: cast6 - Fix checkpatch errors crypto: cast5 - Fix checkpatch errors crypto: camellia - Fix checkpatch errors crypto: authenc - Fix checkpatch errors crypto: api - Fix checkpatch errors crypto: anubis - Fix checkpatch errors crypto: algapi - Fix checkpatch errors crypto: blowfish - Fix checkpatch errors crypto: aead - Fix checkpatch errors crypto: ablkcipher - Fix checkpatch errors crypto: pcrypt - call the complete function on error ...
2010-02-26omap2: Initialize Menelaus and MMC for N8X0Tony Lindgren
Initialize MMC for N8X0 Based on an earlier patches from Nokia released kernel sources at: http://repository.maemo.org/pool/os2008/free/source/k/kernel-source-rx-34/ Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-26[S390] time: remove unused codeHeiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26[S390] correct vdso version stringMartin Schwidefsky
The glibc vdso code for s390 uses the version string 2.6.29, the kernel uses the version string 2.6.26. No wonder the vdso code is never used. The first kernel version to contain the vdso code is 2.6.29 which makes this the correct version. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26[S390] add support for compressed kernelsMartin Schwidefsky
Add the "bzImage" compile target and the necessary code to generate compressed kernel images. The old style uncompressed "image" target is preserved, a simple make will build them both. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26[S390] codepage conversion of kernel parameter lineMartin Schwidefsky
Move the ebcdic to ascii conversion of the kernel parameter line from head.S to early.c and convert the assembler code to C. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26[S390] add z9-ec/z10 instruction to kernel disassemblerMartin Schwidefsky
Add the instruction of the z9-ec and z10 machines to the kernel disassembler. Add the missing "ptff" instruction of z9-109 and the missing "sqd" of g5. Remove useless comments with instruction examples from format table. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26[S390] use kprobes_built_in() in mm/fault codeHeiko Carstens
Use kprobes_built_in() to avoid ifdefs like most other architectures do. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26[S390] bug: use relative pointers in bug table entriesHeiko Carstens
Reduces the size of the bug table entries by 50% on 64bit kernels. Saves around 30kb on a defconfig kernel. s390 version of b93a531e "allow bug table entries to use relative pointers (and use it on x86-64)". Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26[S390] Cleanup struct _lowcore usage and defines.Heiko Carstens
Use asm offsets to make sure the offset defines to struct _lowcore and its layout don't get out of sync. Also add a BUILD_BUG_ON() which checks that the size of the structure is sane. And while being at it change those sites which use odd casts to access the current lowcore. These should use S390_lowcore instead. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26[S390] free_initmem: reduce code duplicationHeiko Carstens
free_initmem() and free_initrd_mem() are nearly identical. So make them call a common function. Also fixes a bug: if the initrd wouldn't start on a page boundary also memory after the initrd would be initialized with the poison value. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26[S390] Replace ENOTSUPP usage with EOPNOTSUPPHeiko Carstens
ENOTSUPP is not supposed to leak to userspace so lets just use EOPNOTSUPP everywhere. Doesn't fix a bug, but makes future reviews easier. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26[S390] spinlock: check virtual cpu running statusGerald Schaefer
This patch introduces a new function that checks the running status of a cpu in a hypervisor. This status is not virtualized, so the check is only correct if running in an LPAR. On acquiring a spinlock, if the cpu holding the lock is scheduled by the hypervisor, we do a busy wait on the lock. If it is not scheduled, we yield over to that cpu. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26[S390] sysinfo: fix SYSIB 3,2,2 structureHeiko Carstens
The size of the field that contains the description block count is only four bits instead of eight bits. The first four bits are reserved but this might change and break. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26[S390] add MACHINE_IS_LPAR flagMartin Schwidefsky
Introduce the MACHINE_IS_LPAR flag for code that should only be executed if Linux is running in an LPAR. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26[S390] qdio: optimize cache line usage of struct qdio_irqJan Glauber
Remove a memset hack that relied on the internal layout of the qdio_irq struct and move the per device statistics data into an own cache line to avoid cache line bashing between the inbound and the outbound queue tasklets. Also reduce the number of allocated queues from 32 to 4 which is the current maximum. That saves a cache line in struct qdio_irq. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26[S390] smp: rework sigp codeHeiko Carstens
Rename signal_processor* functions to sigp*. Add raw variants of each version, so we can get rid of the hacks played in smp code which establish temporary cpu logical mappings so they could call the sigp functions. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26[S390] smp: always reboot on cpu 0Heiko Carstens
Always reboot on logical cpu 0. This makes sure that the IPL cpu is always the same and usually avoids strange numbering schemes between physical and logical cpus. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26[S390] smp: rename and add lowcore definesHeiko Carstens
Rename __LC_RESTART_PSW to __LC_RST_NEW_PSW, add a define for the missing 32 bit variant and the missing old PSWs. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26[S390] zfcpdump: remove cross arch dump supportHeiko Carstens
Remove support to be able to dump 31 bit systems with a 64 bit dumper. This is mostly useless since no distro ships 31 bit kernels together with a 64 bit dumper. We also get rid of a bit of hacky code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26[S390] use inline assembly contraints available with gcc 3.3.3Martin Schwidefsky
Drop support to compile the kernel with gcc versions older than 3.3.3. This allows us to use the "Q" inline assembly contraint on some more inline assemblies without duplicating a lot of complex code (e.g. __xchg and __cmpxchg). The distinction for older gcc versions can be removed which saves a few lines and simplifies the code. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26[S390] cio: fix storage key handlingHeiko Carstens
Some parts of cio do not shift PAGE_DEFAULT_KEY correctly and end up with an incorrect key in their data structures. Since the default key is zero this doesn't really matter. However if somebody would use key-controlled protection for debugging purposes it would be quite helpful if all of this would work as expected. Also remove a stale declaration. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26[S390] cio: wait for channel reportSebastian Ott
To fetch a pending channel report word (crw) we use a kernel thread which triggers stcrw and sleeps on a semaphore. The s390 machine check handler uses crw_handle_channel_report to handle one crw if needed. This patch replaces the semaphore with a waitqueue (to block the kernel thread) and an atomic_t (to count the number of pending requests). By this we achieve the ability to force this thread to check for a pending crw (independent on when it is triggered by the machine check handler) and wait for this action to finish. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26[S390] uaccess: implement strict user copy checksHeiko Carstens
Same as on x86 and sparc, besides the fact that enabling the option will just emit compile time warnings instead of errors. Keeps allyesconfig kernels compiling. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-26Pull misc2634 into release branchTony Luck
generated by cgit (git 2.34.1) at 2025-09-14 04:24:57 +0000