| Age | Commit message (Collapse) | Author |
|---|
|
USB_VBUS is a controlled by a Silergy SY6288CCAC-GP 2A Power
Distribution Switch. The name of it's enable GPIO signal is USB_PWR_EN.
VCC5V is supplied by the main power input called PWR_5V_STB. The name of
it's enable GPIO signal is 3V3_5V_EN.
VCC3V3, VCC_DDR3_1V5 and VCCK (the CPU power supply) each use a separate
Silergy SY8089AAC-GP 2A step down regulator. They are all supplied by the
board's main 5V. VCC3V3 and VCC_DDR3_1V5 are fixed regulators while the
voltage of VCCK can be changed by changing it's feedback voltage via
PWM_C.
VCC1V8 is an ABLIC S-1339D18-M5001-GP fixed voltage regulator which is
supplied by VCC3V3.
VCC_RTC is a Global Mixed-mode Technology Inc. G918T12U-GP LDO which. It
is supplied by either VCC3V3 (when the board is powered) or the RTC coin
cell battery.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
The INTR32 pin of the IP101GR Ethernet PHY is routed to the GPIOH_3 pad
on the SoC.
Enable the interrupt function of the PHY's INTR32 pin to switch it from
it's default "receive error" mode to "interrupt pin" mode.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
SAR ADC enabled channel 8 can be used to measure the chip temperature.
This can be made available to the hwmon subsystem by using iio-hwmon.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
SAR ADC enabled channel 8 can be used to measure the chip temperature.
This can be made available to the hwmon subsystem by using iio-hwmon.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
SAR ADC enabled channel 8 can be used to measure the chip temperature.
This can be made available to the hwmon subsystem by using iio-hwmon.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
The SAR ADC can measure the chip temperature of the SoC. This only
works if the chip is calibrated and if the calibration data is written
to the correct registers. The calibration data is stored in the upper
two bytes of eFuse offset 0x1f4.
This adds the eFuse cell for the temperature calibration data and
passes it to the SAR ADC. We also need to pass the HHI sysctrl node to
the SAR ADC because the 4th TSC (temperature sensor calibration
coefficient) bit is stored in the HHI region (unlike bits [3:0] which
are stored directly inside the SAR ADC's register area).
On boards that have the SAR ADC enabled channel 8 can be used to
measure the chip temperature.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
The SAR ADC can measure the chip temperature of the SoC. This only
works if the chip is calibrated and if the calibration data is written
to the correct registers. The calibration data is stored in the upper
two bytes of eFuse offset 0x1f4.
This adds the eFuse cell for the temperature calibration data and
passes it to the SAR ADC. We also need to pass the HHI sysctrl node to
the SAR ADC because the 4th TSC (temperature sensor calibration
coefficient) bit is stored in the HHI region (unlike bits [3:0] which
are stored directly inside the SAR ADC's register area).
On boards that have the SAR ADC enabled channel 8 can be used to
measure the chip temperature.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
The SAR ADC on Meson8m2 is slightly different compared to Meson8. The
ADC functionality is identical but the calibration of the internal
thermal sensor is different.
Use the Meson8m2 specific compatible so the temperature sensor is
calibrated correctly on boards using the Meson8m2 SoC.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
The clock controller on Meson8/Meson8m2 and Meson8b is part of a
register region called "HHI". This register area contains more
functionality than just a clock controller:
- the clock controller
- some reset controller bits
- temperature sensor calibration data (on Meson8b and Meson8m2 only)
- HDMI controller
Allow access to this HHI register area as "system controller". Also
migrate the Meson8 and Meson8b clock controllers to this new node.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
According to the Odroid-C1+ schematics the Ethernet TXD1 signal is
routed to GPIOH_5 and the TXD0 signal is routed to GPIOH_6.
The public S805 datasheet shows that TXD0 can be routed to DIF_2_P and
TXD1 can be routed to DIF_2_N instead.
The pin groups eth_txd0_0 (GPIOH_6) and eth_txd0_1 (DIF_2_P) are both
configured as Ethernet TXD0 and TXD1 data lines in meson8b.dtsi. At the
same time eth_txd1_0 (GPIOH_5) and eth_txd1_1 (DIF_2_N) are configured
as TXD0 and TXD1 data lines as well.
This results in a bad Ethernet receive performance. Presumably this is
due to the eth_txd0 and eth_txd1 signal being routed to the wrong pins.
As a result of that data can only be transmitted on eth_txd2 and
eth_txd3. However, I have no scope to fully confirm this assumption.
The vendor u-boot sources for Odroid-C1 use the following Ethernet
pinmux configuration:
SET_CBUS_REG_MASK(PERIPHS_PIN_MUX_6, 0x3f4f);
SET_CBUS_REG_MASK(PERIPHS_PIN_MUX_7, 0xf00000);
This translates to the following pin groups in the mainline kernel:
- register 6 bit 0: eth_rxd1 (DIF_0_P)
- register 6 bit 1: eth_rxd0 (DIF_0_N)
- register 6 bit 2: eth_rx_dv (DIF_1_P)
- register 6 bit 3: eth_rx_clk (DIF_1_N)
- register 6 bit 6: eth_tx_en (DIF_3_P)
- register 6 bit 8: eth_ref_clk (DIF_3_N)
- register 6 bit 9: eth_mdc (DIF_4_P)
- register 6 bit 10: eth_mdio_en (DIF_4_N)
- register 6 bit 11: eth_tx_clk (GPIOH_9)
- register 6 bit 12: eth_txd2 (GPIOH_8)
- register 6 bit 13: eth_txd3 (GPIOH_7)
- register 7 bit 20: eth_txd0_0 (GPIOH_6)
- register 7 bit 21: eth_txd1_0 (GPIOH_5)
- register 7 bit 22: eth_rxd3 (DIF_2_P)
- register 7 bit 23: eth_rxd2 (DIF_2_N)
Drop the eth_txd0_1 and eth_txd1_1 groups from eth_rgmii_pins to fix the
Ethernet transmit performance on Odroid-C1. Also add the eth_rxd2 and
eth_rxd3 groups so we don't rely on the bootloader to set them up.
iperf3 statistics before this change:
- transmitting from Odroid-C1: 741 Mbits/sec (0 retries)
- receiving on Odroid-C1: 199 Mbits/sec (1713 retries)
iperf3 statistics after this change:
- transmitting from Odroid-C1: 667 Mbits/sec (0 retries)
- receiving on Odroid-C1: 750 Mbits/sec (0 retries)
Fixes: b96446541d8390 ("ARM: dts: meson8b: extend ethernet controller description")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Emiliano Ingrassia <ingrassia@epigenesys.com>
Cc: Linus Lüssing <linus.luessing@c0d3.blue>
Tested-by: Emiliano Ingrassia <ingrassia@epigenesys.com>
Reviewed-by: Emiliano Ingrassia <ingrassia@epigenesys.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
__cmpxchg_small erroneously uses u8 for load comparison which can
be either char or short. This patch changes the local variable to
u32 which is sufficiently sized, as the loaded value is already
masked and shifted appropriately. Using an integer size avoids
any unnecessary canonicalization from use of non native widths.
This patch is part of a series that adapts the MIPS small word
atomics code for xchg and cmpxchg on short and char to RISC-V.
Cc: RISC-V Patches <patches@groups.riscv.org>
Cc: Linux RISC-V <linux-riscv@lists.infradead.org>
Cc: Linux MIPS <linux-mips@linux-mips.org>
Signed-off-by: Michael Clark <michaeljclark@mac.com>
[paul.burton@mips.com:
- Fix varialble typo per Jonas Gorski.
- Consolidate load variable with other declarations.]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: 3ba7f44d2b19 ("MIPS: cmpxchg: Implement 1 byte & 2 byte cmpxchg()")
Cc: stable@vger.kernel.org # v4.13+
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 bug fixes from Martin Schwidefsky:
- Fix specification exception on z196 during ap probe
- A fix for suspend-to-disk, the VMAP stack patch broke the
swsusp_arch_suspend function
- The EMC CKD ioctl of the dasd driver needs an additional size check
for user space data
- Revert an incorrect patch for the PCI base code that removed a bit
lock that turned out to be required after all
* tag 's390-5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
Revert "s390/pci: remove bit_lock usage in interrupt handler"
s390/zcrypt: fix specification exception on z196 during ap probe
s390/dasd: fix using offset into zero size array error
s390/suspend: fix stack setup in swsusp_arch_suspend
|
|
User space tools which do automated task placement need information
about AVX-512 usage of tasks, because AVX-512 usage could cause core
turbo frequency drop and impact the running task on the sibling CPU.
The XSAVE hardware structure has bits that indicate when valid state
is present in registers unique to AVX-512 use. Use these bits to
indicate when AVX-512 has been in use and add per-task AVX-512 state
timestamp tracking to context switch.
Well-written AVX-512 applications are expected to clear the AVX-512
state when not actively using AVX-512 registers, so the tracking
mechanism is imprecise and can theoretically miss AVX-512 usage during
context switch. But it has been measured to be precise enough to be
useful under real-world workloads like tensorflow and linpack.
If higher precision is required, suggest user space tools to use the
PMU-based mechanisms in combination.
Signed-off-by: Aubrey Li <aubrey.li@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: aubrey.li@intel.com
Link: http://lkml.kernel.org/r/20190117183822.31333-1-aubrey.li@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
When facility.76 MSAX3 is present for the guest we must issue a validity
interception if the CRYCBD is not valid.
The bit CRYCBD.31 is an effective field and tested at each guest level
and has for effect to mask the facility.76
It follows that if CRYCBD.31 is clear and AP is not in use we do not
have to test the CRYCBD validatity even if facility.76 is present in the
host.
Fixes: 6ee74098201b ("KVM: s390: vsie: allow CRYCB FORMAT-0")
Cc: stable@vger.kernel.org
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reported-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <1549876849-32680-1-git-send-email-pmorel@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Thomas noticed that the new arch/x86/include/asm/cpu_device_id.h header is
a train-wreck that didn't incorporate review feedback like not using __u8
in kernel-only headers.
While at it also fix all the *other* problems this header has:
- Use canonical names for the header guards. It's inexplicable why a non-standard
guard was used.
- Don't define the header guard to 1. Plus annotate the closing #endif as done
absolutely every other header. Again, an inexplicable source of noise.
- Move the kernel API calls provided by this header next to each other, there's
absolutely no reason to have them spread apart in the header.
- Align the INTEL_CPU_DESC() macro initializations vertically, this is easier to
read and it's also the canonical style.
- Actually name the macro arguments properly: instead of 'mod, step, rev',
spell out 'model, stepping, revision' - it's not like we have a lack of
characters in this header.
- Actually make arguments macro-safe - again it's inexplicable why it wasn't
done properly to begin with.
Quite amazing how many problems a 41 lines header can contain.
This kind of code quality is unacceptable, and it slipped through the
review net of 2 developers and 2 maintainers, including myself, until
Thomas noticed it. :-/
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Vince (and later on Ravi) reported crashes in the BTS code during
fuzzing with the following backtrace:
general protection fault: 0000 [#1] SMP PTI
...
RIP: 0010:perf_prepare_sample+0x8f/0x510
...
Call Trace:
<IRQ>
? intel_pmu_drain_bts_buffer+0x194/0x230
intel_pmu_drain_bts_buffer+0x160/0x230
? tick_nohz_irq_exit+0x31/0x40
? smp_call_function_single_interrupt+0x48/0xe0
? call_function_single_interrupt+0xf/0x20
? call_function_single_interrupt+0xa/0x20
? x86_schedule_events+0x1a0/0x2f0
? x86_pmu_commit_txn+0xb4/0x100
? find_busiest_group+0x47/0x5d0
? perf_event_set_state.part.42+0x12/0x50
? perf_mux_hrtimer_restart+0x40/0xb0
intel_pmu_disable_event+0xae/0x100
? intel_pmu_disable_event+0xae/0x100
x86_pmu_stop+0x7a/0xb0
x86_pmu_del+0x57/0x120
event_sched_out.isra.101+0x83/0x180
group_sched_out.part.103+0x57/0xe0
ctx_sched_out+0x188/0x240
ctx_resched+0xa8/0xd0
__perf_event_enable+0x193/0x1e0
event_function+0x8e/0xc0
remote_function+0x41/0x50
flush_smp_call_function_queue+0x68/0x100
generic_smp_call_function_single_interrupt+0x13/0x30
smp_call_function_single_interrupt+0x3e/0xe0
call_function_single_interrupt+0xf/0x20
</IRQ>
The reason is that while event init code does several checks
for BTS events and prevents several unwanted config bits for
BTS event (like precise_ip), the PERF_EVENT_IOC_PERIOD allows
to create BTS event without those checks being done.
Following sequence will cause the crash:
If we create an 'almost' BTS event with precise_ip and callchains,
and it into a BTS event it will crash the perf_prepare_sample()
function because precise_ip events are expected to come
in with callchain data initialized, but that's not the
case for intel_pmu_drain_bts_buffer() caller.
Adding a check_period callback to be called before the period
is changed via PERF_EVENT_IOC_PERIOD. It will deny the change
if the event would become BTS. Plus adding also the limit_period
check as well.
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20190204123532.GA4794@krava
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Enable various options in the defconfigs of both i386 and x86_64
that could do with some test coverage in automated testing. Note
that these options are typically enabled by distros as well.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
APEI's Generic Hardware Error Source structures do not describe
whether the SDEI event is shared or private, as this information is
discoverable via the API.
GHES needs to know whether an event is normal or critical to avoid
sharing locks or fixmap entries, but GHES shouldn't have to know about
the SDEI API.
Add a helper to register the GHES using the appropriate normal or
critical callback.
Signed-off-by: James Morse <james.morse@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Linux 5.0-rc6
|
|
We need the debugfs fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the char-misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The 'write' parameter is unused in gup_fast_permitted() so remove it.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20190210223424.13934-1-ira.weiny@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
A microcode patch is also needed for Goldmont while counter freezing
feature is enabled. Otherwise, there will be some issues, e.g. PMI lost.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bp@alien8.de
Link: https://lkml.kernel.org/r/1549319013-4522-5-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Clean up counter freezing quirk to use the new facility to check for
min microcode revisions.
Rename the counter freezing quirk related functions. Because other
platforms, e.g. Goldmont, also needs to call the quirk.
Only check the boot CPU, assuming models and features are consistent
over all CPUs.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bp@alien8.de
Link: https://lkml.kernel.org/r/1549319013-4522-4-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Clean up SNB PEBS quirk to use the new facility to check for min
microcode revisions.
Only check the boot CPU, assuming models and features are consistent
over all CPUs.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bp@alien8.de
Link: https://lkml.kernel.org/r/1549319013-4522-3-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
KVM added a workaround for PEBS events leaking into guests with
commit:
26a4f3c08de4 ("perf/x86: disable PEBS on a guest entry.")
This uses the VT entry/exit list to add an extra disable of the
PEBS_ENABLE MSR.
Intel also added a fix for this issue to microcode updates on
Haswell/Broadwell/Skylake.
It turns out using the MSR entry/exit list makes VM exits
significantly slower. The list is only needed for disabling
PEBS, because the GLOBAL_CTRL change gets optimized by
KVM into changing the VMCS.
Check for the microcode updates that have the microcode
fix for leaking PEBS, and disable the extra entry/exit list
entry for PEBS_ENABLE. In addition we always clear the
GLOBAL_CTRL for the PEBS counter while running in the guest,
which is enough to make them never fire at the wrong
side of the host/guest transition.
The overhead for VM exits with the filtering active with the patch is
reduced from 8% to 4%.
The microcode patch has already been merged into future platforms.
This patch is one-off thing. The quirks is used here.
For other old platforms which doesn't have microcode patch and quirks,
extra disable of the PEBS_ENABLE MSR is still required.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bp@alien8.de
Link: https://lkml.kernel.org/r/1549319013-4522-2-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
For bug workarounds or checks, it is useful to check for specific
microcode revisions.
Add a new generic function to match the CPU with stepping.
Add the other function to check the min microcode revisions for
the matched CPU.
A new table format is introduced to facilitate the quirk to
fill the related information.
This does not change the existing x86_cpu_id because it's an ABI
shared with modules, and also has quite different requirements,
as in no wildcards, but everything has to be matched exactly.
Originally-by: Andi Kleen <ak@linux.intel.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: eranian@google.com
Link: https://lkml.kernel.org/r/1549319013-4522-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The peripheral bus on the i.MX8MQ is still limited to 32bits, so
we need to declare the usable range for device DMA operations, as
the DRAM will extend across the 32bit boundary if more than 3GB
are installed.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Fix page fault handling code to fixup r16-r18 registers.
Before the patch code had off-by-two registers bug.
This bug caused overwriting of ps,pc,gp registers instead
of fixing intended r16,r17,r18 (see `struct pt_regs`).
More details:
Initially Dmitry noticed a kernel bug as a failure
on strace test suite. Test passes unmapped userspace
pointer to io_submit:
```c
#include <err.h>
#include <unistd.h>
#include <sys/mman.h>
#include <asm/unistd.h>
int main(void)
{
unsigned long ctx = 0;
if (syscall(__NR_io_setup, 1, &ctx))
err(1, "io_setup");
const size_t page_size = sysconf(_SC_PAGESIZE);
const size_t size = page_size * 2;
void *ptr = mmap(NULL, size, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
if (MAP_FAILED == ptr)
err(1, "mmap(%zu)", size);
if (munmap(ptr, size))
err(1, "munmap");
syscall(__NR_io_submit, ctx, 1, ptr + page_size);
syscall(__NR_io_destroy, ctx);
return 0;
}
```
Running this test causes kernel to crash when handling page fault:
```
Unable to handle kernel paging request at virtual address ffffffffffff9468
CPU 3
aio(26027): Oops 0
pc = [<fffffc00004eddf8>] ra = [<fffffc00004edd5c>] ps = 0000 Not tainted
pc is at sys_io_submit+0x108/0x200
ra is at sys_io_submit+0x6c/0x200
v0 = fffffc00c58e6300 t0 = fffffffffffffff2 t1 = 000002000025e000
t2 = fffffc01f159fef8 t3 = fffffc0001009640 t4 = fffffc0000e0f6e0
t5 = 0000020001002e9e t6 = 4c41564e49452031 t7 = fffffc01f159c000
s0 = 0000000000000002 s1 = 000002000025e000 s2 = 0000000000000000
s3 = 0000000000000000 s4 = 0000000000000000 s5 = fffffffffffffff2
s6 = fffffc00c58e6300
a0 = fffffc00c58e6300 a1 = 0000000000000000 a2 = 000002000025e000
a3 = 00000200001ac260 a4 = 00000200001ac1e8 a5 = 0000000000000001
t8 = 0000000000000008 t9 = 000000011f8bce30 t10= 00000200001ac440
t11= 0000000000000000 pv = fffffc00006fd320 at = 0000000000000000
gp = 0000000000000000 sp = 00000000265fd174
Disabling lock debugging due to kernel taint
Trace:
[<fffffc0000311404>] entSys+0xa4/0xc0
```
Here `gp` has invalid value. `gp is s overwritten by a fixup for the
following page fault handler in `io_submit` syscall handler:
```
__se_sys_io_submit
...
ldq a1,0(t1)
bne t0,4280 <__se_sys_io_submit+0x180>
```
After a page fault `t0` should contain -EFALUT and `a1` is 0.
Instead `gp` was overwritten in place of `a1`.
This happens due to a off-by-two bug in `dpf_reg()` for `r16-r18`
(aka `a0-a2`).
I think the bug went unnoticed for a long time as `gp` is one
of scratch registers. Any kernel function call would re-calculate `gp`.
Dmitry tracked down the bug origin back to 2.1.32 kernel version
where trap_a{0,1,2} fields were inserted into struct pt_regs.
And even before that `dpf_reg()` contained off-by-one error.
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: linux-alpha@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reported-and-reviewed-by: "Dmitry V. Levin" <ldv@altlinux.org>
Cc: stable@vger.kernel.org # v2.1.32+
Bug: https://bugs.gentoo.org/672040
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Matt Turner <mattst88@gmail.com>
|
|
Eiger machine vector definition has nr_irqs 128, and working 2.6.26
boot shows SCSI getting IRQ-s 64 and 65. Current kernel boot fails
because Symbios SCSI fails to request IRQ-s and does not find the disks.
It has been broken at least since 3.18 - the earliest I could test with
my gcc-5.
The headers have moved around and possibly another order of defines has
worked in the past - but since 128 seems to be correct and used, fix
arch/alpha/include/asm/irq.h to have NR_IRQS=128 for Eiger.
This fixes 4.19-rc7 boot on my Force Flexor A264 (Eiger subarch).
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Matt Turner <mattst88@gmail.com>
|
|
It's needed to properly reboot the i.MX8MQ EVK board.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This is needed to boot correctly from eMMC on the i.MX8MQ EVK board.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add the node for the ARM Performance Monitor Units.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add RTC support for i.MX8MQ.
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Tested-by: Chris Spencer <christopher.spencer@sea.co.uk>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable the Freescale/NXP QuadSPI controller with a proper pinctrl set on
the i.MX8MQ EVK board.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add a node for the Freescale/NXP QuadSPI controller and extend the AIPS3
memory range to accommodate the QuadSPI-memory region.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for the three ECSPI ports present on i.MX8MQ.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable driver support of NXP FlexSPI controller.
Signed-off-by: Yogesh Narayan Gaur <yogeshnarayan.gaur@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable all the i.MX8MQ configs necessary to boot.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable basic drivers for imx8qxp booting up support:
SCU firmware, Mailbox(MU), SCU Power Domain/Pinctrl/Clock,
Uart, MMC, FEC.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This patch enables CONFIG_RTC_DRV_IMX_SC as module by default.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add the stmpe-adc DT node as found on Toradex iMX6 modules
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add missing devicetree compatibles for the following LS1021A based
boards:
ls1021a-moxa-uc-8410a.dts
ls1021a-qds.dts
ls1021a-twr.dts
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
A valid WEIM range configuration must specify range entries for
all four chip selects. This fixes an error on boot:
imx-weim: probe of 21b8000.weim failed with error -22
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The Phytec phyBOARD Segin is i.MX6 based SBC, available with either an
i.MX6UL or i.MX6ULL SOM and various add-on boards.
The following adds support for the "Full Featured" version of the Segin,
which is provided with the i.MX6UL SOM and the PEB-EVAL-01 evaluation
module.
Its hardware specifications are:
* 512MB DDR3 memory
* 512MB NAND flash
* Dual 10/100 Ethernet
* USB Host and USB OTG
* RS232
* MicroSD external storage
* Audio, RS232, I2C, SPI, CAN headers
* Further I/O options via A/V and Expansion headers
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Since commit d2d0ad2aec4a ("i2c: imx: use open drain for recovery
GPIO") GPIO lib expects this GPIO to be configured as open drain.
Make sure we define this GPIO as open drain in the device tree.
This gets rid of the following warning:
gpio-81 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Note that currently the i.MX pinctrl driver does not support
enabling open drain directly, so this patch has no effect in
practice. Open drain is enabled by the fixed pinmux entry.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
esdhc0 is connected to an eMMC, so it is safe to pass the "no-sdio"/"no-sd"
properties.
esdhc1 is wired to a standard SD socket, so pass the "no-sdio" property.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
