summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2010-02-15omap2/3/4: serial: fix coding style indentaionvikram pandita
No logical code change Fix coding style indentaion as per checkpatch.pl Fix multi-line comment style reported by Nishanth Menon Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Cc: Nishanth Menon <nm@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3/4: gpmc: avoid section definitions on headersFelipe Balbi
trivial patch, no functional changes. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3/4: gpmc: kill compile warningFelipe Balbi
Get rid of the following warnings: arch/arm/mach-omap2/gpmc.c:550:30: warning: non-ANSI function declaration of function 'omap3_gpmc_save_context' arch/arm/mach-omap2/gpmc.c:581:33: warning: non-ANSI function declaration of function 'omap3_gpmc_restore_context' Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3/4: mailbox: kill compile warning in mailbox.cFelipe Balbi
Change %d to %ld to avoid the compile warning. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap1: mailbox: kill compile warningFelipe Balbi
use ioremap and remove unused variable to get rid of compile warnings. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap: McBSP: Use cache when modifying individual register bitsJanusz Krzysztofik
Change the way McBSP registers are updated: use cached values instead of relying upon those read back from the device. With this patch, I have finally managed to get rid of all random playback/recording hangups on my OMAP1510 based Amstrad Delta hardware. Before that, values read back from McBSP registers to be used for updating them happened to be errornous. From the hardware side, the issue appeared to be caused by a relatively high power requirements of an external USB adapter connected to the board's printer dedicated USB port. I think there is one important point that makes this patch worth of applying, apart from my hardware quality. With the current code, if it ever happens to any machine, no matter if OMAP1510 or newer, to read incorrect value from a McBSP register, this wrong value will get written back without any checking. That can lead to hardware damage if, for example, an input pin is turned into output as a result. Applies on top of patch 3 from this series: [PATCH v9 3/4] OMAP: McBSP: Introduce caching in register write operations Tested on OMAP1510 based Amstrad Delta using linux-omap for-next, commit fb7380d70e041e4b3892f6b19dff7efb609d15a4 (2.6.33-rc3+ dated 2010-01-11). Compile-tested with omap_3430sdp_defconfig. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap: McBSP: Introduce caching in register write operationsJanusz Krzysztofik
Determine cache size required per McBSP port at init time, based on processor type running on. Allocate space for storing cached copies of McBSP register values at port request. Modify omap_msbcp_write() function to update the cache with every register write operation. Modify omap_mcbsp_read() to support reading from cache or hardware. Update MCBSP_READ() macro for modified omap_mcbsp_read() function API. Introduce a new macro that reads from the cache. Tested on OMAP1510 based Amstrad Delta using linux-omap for-next, commit fb7380d70e041e4b3892f6b19dff7efb609d15a4 (2.6.33-rc3+ dated 2010-01-11). Compile-tested with: omap_perseus2_730_defconfig, omap_generic_1610_defconfig, omap_generic_2420_defconfig, omap_2430sdp_defconfig, omap_3430sdp_defconfig, omap_4430sdp_defconfig with CONFIG_OMAP_MCBSP=y selected. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap: McBSP: Modify macros/functions API for easy cache accessJanusz Krzysztofik
OMAP_MCBSP_READ()/_WRITE() macros and omap_mcbsp_read()/_write() functions accept McBSP register base address as an argument. In order to support caching, that must be replaced with an address of the omap_mcbsp structure that would provide addresses for both register AND cache access. Since OMAP_ prefix seems obvious in macro names, drop it off in order to minimize line wrapping throughout the file. Tested on OMAP1510 based Amstrad Delta using linux-omap for-next, commit fb7380d70e041e4b3892f6b19dff7efb609d15a4 (2.6.33-rc3+ dated 2010-01-11). Compile-tested with omap_3430sdp_defconfig. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap: McBSP: Use macros for all register read/write operationsJanusz Krzysztofik
There are several places where readw()/writew() functions are used instead of OMAP_MCBSP_READ()/WRITE() macros for manipulating McBSP registers. Replace them with macros to ensure consistent behaviour after caching is introduced. Tested on OMAP1510 based Amstrad Delta. Compile-tested with omap_3430sdp_defconfig. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap iommu: fix incorrect address for largepage 1st entryHiroshi DOYU
There was a potential risk that the following "memset" could override its range if a given address was not the 1st entry of a largepage. This is not the case for "iovmm". Reported-by: Hari Nagalla <hnagalla@ti.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Hari Nagalla <hnagalla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap: iommu: fix incorrect address for supersection 1st entryHiroshi DOYU
There was a potential risk that the following "memset" could override its range if a given address was not the 1st entry of a supersection. This is not the case for "iovmm". Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Hari Nagalla <hnagalla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap iommu: cleanup iommu page address mask and definitionsHiroshi DOYU
This is just a cleanup, but adds a few macros here, which can be used in the proceeding patches. Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap: convert boards to use physmap-flashLadislav Michl
Convert OMAP based boards to use physmap-flash. Refreshed against today's Linux omap kernel tree Cc: linux-mtd@lists.infradead.org Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3/4: Add omap4 into omap3_defconfigTony Lindgren
Add omap4 into omap3_defconfig. Note that this does not yet boot on omap4, but boots on omap2 and omap3. Also note that CONFIG_SMP does not currently work on uniprocessor ARMs. Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3/4: Fix mach-omap2/serial.c for multibootTony Lindgren
Initialize UART4 only for 3630 and 44xx. Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap: Fix gpio.c for multi-omap for omap4Tony Lindgren
Set up METHOD_GPIO_44XX instead of trying to use the METHOD_GPIO_24XX. Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap3/4: Fix compile for multi-omap for clkops_noncore_dpll_opsTony Lindgren
Rename clkops_noncore_dpll_ops for omap3 and omap4. Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3/4: Allow booting omap4 with multi-omap configurationTony Lindgren
Allow booting omap4 with multi-omap configuration. Tested only on omap2 and omap3, please somebody test on omap4 and ack. Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3/4: Clean up entry-macro.s for adding support for omap4 multibootTony Lindgren
Move defines around and set up handlers based on MULTI_OMAP2. Note that this will only allow compiling in omap4 with omap2 and omap3. It will not yet make omap4 boot with multi-omap. Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap4: Use get_irqnr_preambleTony Lindgren
Use get_irqnr_preamble Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3/4: Clean up defines for entry-macro.STony Lindgren
Define the irq base the same way as for omap2 and omap3, and start using get_irqnr_preamble. Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap: Move multi-omap ifdeffery into it's own header fileTony Lindgren
This way we can include it easily as needed also for .S files. Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3: Update omap3_defconfig to build in all the 2420 based boardsTony Lindgren
Note that booting 2420 depends on another patch posted earlier to not select CONFIG_CPU_32v6K if CONFIG_ARCH_OMAP2 is selected. Also note that we cannot add omap2430 in yet because of the different clock addresses compared to 2420. Also note that we cannot have CONFIG_CPU_32v6K=y in order to boot on 24xx. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3: Fix initcalls for multi-omapTony Lindgren
Otherwise the wrong initcalls can run. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3/4: Replace orred CONFIG_ARCH_OMAP2/3/4 with CONFIG_ARCH_OMAP2PLUSTony Lindgren
omap: Replace orred CONFIG_ARCH_OMAP2/3/4 with CONFIG_ARCH_OMAP2PLUS Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap3: Replace ARCH_OMAP34XX with ARCH_OMAP3Tony Lindgren
Replace ARCH_OMAP34XX with ARCH_OMAP3 Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2Tony Lindgren
Convert ARCH_OMAP24XX to ARCH_OMAP2 Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3/4: Fix mbox init for multi-omapTony Lindgren
Fix mbox init for multi-omap Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3/4: Fix omap2_map_common_io for multi-omapTony Lindgren
Fix omap2_map_common_io for multi-omap Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap: Fix dmtimer.c for multi-omap bootTony Lindgren
Fix dmtimer.c for multi-omap boot. Also remove legacy clk_enable/disable wrappers that are no longer needed. Note that the clock handling should be further improved to make use of the clock aliases. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3: Multiboot compile fixes to compile in omap2 and omap3Tony Lindgren
Allows compiling in omap2 and omap3. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3: Make get_irqnr_and_base common for mach-omap2 multibootTony Lindgren
Make get_irqnr_and_base common for mach-omap2 multiboot Thanks to a tip from Russell King <rmk+kernel@arm.linux.org.uk>, this also optimizes the code for non-multiboot configurations by using get_irqnr_preamble. Note that this will only work currently for 24xx and 34xx. Support for 44xx can be added later on for basic multiboot, and similar patch should be done for mach-omap1/entry-macro.S. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15Merge branch 'debug-ll' into omap-for-linusTony Lindgren
2010-02-15omap: Remove old DEBUG_LL serial port optionsTony Lindgren
These are no longer needed. Note that zoom boards should now set their own function in uncompress.h and debug-macro.S for the external UART. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap: Make uncompress code and DEBUG_LL code genericTony Lindgren
Define arch_decomp_setup() the same way as some other architectures do. Use arch_id to configure the debug uart based on the machine_is by storing it into the uart scratchpad register for DEBUG_LL code to use. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap: Clean the serial port definesTony Lindgren
This way we don't have conflicts with the defines with compiling in multiple omaps. Set the addresses for uarts in struct omap_globals for the early serial init code. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15ARM: dma-mapping: fix for speculative prefetchingRussell King
ARMv6 and ARMv7 CPUs can perform speculative prefetching, which makes DMA cache coherency handling slightly more interesting. Rather than being able to rely upon the CPU not accessing the DMA buffer until DMA has completed, we now must expect that the cache could be loaded with possibly stale data from the DMA buffer. Where DMA involves data being transferred to the device, we clean the cache before handing it over for DMA, otherwise we invalidate the buffer to get rid of potential writebacks. On DMA Completion, if data was transferred from the device, we invalidate the buffer to get rid of any stale speculative prefetches. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-By: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-02-15ARM: dma-mapping: remove dmac_clean_range and dmac_inv_rangeRussell King
These are now unused, and so can be removed. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-By: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-02-15ARM: dma-mapping: provide per-cpu type map/unmap functionsRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-By: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-02-15ARM: dma-mapping: simplify dma_cache_maint_pageRussell King
dma_cache_maint_contiguous is now simple enough to live inside dma_cache_maint_page, so move it there. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-By: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-02-15ARM: dma-mapping: move selection of page ops out of dma_cache_maint_contiguousRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-By: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-02-15ARM: dma-mapping: push buffer ownership down into dma-mapping.cRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-By: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-02-15ARM: dma-mapping: introduce the idea of buffer ownershipRussell King
The DMA API has the notion of buffer ownership; make it explicit in the ARM implementation of this API. This gives us a set of hooks to allow us to deal with CPU cache issues arising from non-cache coherent DMA. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-By: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-By: Jamie Iles <jamie@jamieiles.com>
2010-02-15OMAP: DSS2: DSI: export dsi_vc_enable_hs()Tomi Valkeinen
Rename and export dsi_vc_enable_hs() so that the display drivers can control the mode of the DSI link. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-15OMAP: DSS2: DSI: add helpers for DCS read/writeTomi Valkeinen
Add helper functions for most common DCS read and write operations. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-15sh: Fix up legacy PMB mode offset calculation.Paul Mundt
The change for fixing up sh64 inadvertently inverted the logic for legacy PMB, fix that back up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-15Merge branch 'sh/stable-updates'Paul Mundt
2010-02-15sh64: fix tracing of signals.Paul Mundt
This follows the parisc change to ensure that tracehook_signal_handler() is aware of when we are single-stepping in order to ptrace_notify() appropriately. While this was implemented for 32-bit SH, sh64 neglected to make use of TIF_SINGLESTEP when it was folded in with the 32-bit code, resulting in ptrace_notify() never being called. As sh64 uses all of the other abstractions already, this simply plugs in the thread flag in the appropriate enable/disable paths and fixes up the tracehook notification accordingly. With this in place, sh64 is brought in line with what 32-bit is already doing. Reported-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-14ARM: 5935/1: [U300] Fix the DMA configurationLinus Walleij
This fixes a few bugs in the DMA configuration for the COH 901 318 DMA engine used in U300. It also removes the directional parameter for each channel: separate DMA engine patches (submitted to the DMA engine maintainer) switches that mechanism over to using dynamic configuration of this, to handle bidirectional DMA channels. Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-14ARM: 5932/1: ux500: fix DEBUG_LL/earlyprintkRabin Vincent
Add a static mapping for the UART and correct its virtual address in debug-macro.S, to make DEBUG_LL/earlyprintk work. Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit (git 2.34.1) at 2025-09-15 09:54:55 +0000