summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2021-01-07arm64: Move PSTATE.TCO setting to separate functionsCatalin Marinas
For consistency with __uaccess_{disable,enable}_hw_pan(), move the PSTATE.TCO setting into dedicated __uaccess_{disable,enable}_tco() functions. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com>
2021-01-07arm64: dts: imx8mn: Fix duplicate node nameShengjiu Wang
Error log: sysfs: cannot create duplicate filename '/bus/platform/devices/30000000.bus' The spba bus name is duplicate with aips bus name. Refine spba bus name to fix this issue. Fixes: 970406eaef3a ("arm64: dts: imx8mn: Enable Asynchronous Sample Rate Converter") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-06sh: mach-sh03: remove duplicate includeWang Qing
Remove duplicate header which is included twice. Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: Rich Felker <dalias@libc.org>
2021-01-06arch: sh: remove duplicate includeWang Qing
Remove duplicate header which is included twice. Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: Rich Felker <dalias@libc.org>
2021-01-06sh: Drop ARCH_NR_GPIOS definitionAndy Shevchenko
The default by generic header is the same, hence drop unnecessary definition. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rich Felker <dalias@libc.org>
2021-01-06sh: Remove unused HAVE_COPY_THREAD_TLS macroJinyang He
Fixes: e1cc9d8d596e ("sh: switch to copy_thread_tls()") Signed-off-by: Jinyang He <hejinyang@loongson.cn> Signed-off-by: Rich Felker <dalias@libc.org>
2021-01-06sh: remove CONFIG_IDE from most defconfigChristoph Hellwig
Remove CONFIG_IDE from defconfigs that did not actually select chipset drivers, and switch ones that have libata drivers to libata. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Rich Felker <dalias@libc.org>
2021-01-06sh: mm: Convert to DEFINE_SHOW_ATTRIBUTEQinglang Miao
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Rich Felker <dalias@libc.org>
2021-01-06arch/sh: hyphenate Non-Uniform in Kconfig promptRandy Dunlap
Hyphenate Non-Uniform in the NUMA kconfig prompt. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: linux-sh@vger.kernel.org Cc: Jiri Kosina <trivial@kernel.org> Signed-off-by: Rich Felker <dalias@libc.org>
2021-01-06sh: dma: fix kconfig dependency for G2_DMANecip Fazil Yildiran
When G2_DMA is enabled and SH_DMA is disabled, it results in the following Kbuild warning: WARNING: unmet direct dependencies detected for SH_DMA_API Depends on [n]: SH_DMA [=n] Selected by [y]: - G2_DMA [=y] && SH_DREAMCAST [=y] The reason is that G2_DMA selects SH_DMA_API without depending on or selecting SH_DMA while SH_DMA_API depends on SH_DMA. When G2_DMA was first introduced with commit 40f49e7ed77f ("sh: dma: Make G2 DMA configurable."), this wasn't an issue since SH_DMA_API didn't have such dependency, and this way was the only way to enable it since SH_DMA_API was non-visible. However, later SH_DMA_API was made visible and dependent on SH_DMA with commit d8902adcc1a9 ("dmaengine: sh: Add Support SuperH DMA Engine driver"). Let G2_DMA depend on SH_DMA_API instead to avoid Kbuild issues. Fixes: d8902adcc1a9 ("dmaengine: sh: Add Support SuperH DMA Engine driver") Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com> Signed-off-by: Rich Felker <dalias@libc.org>
2021-01-06x86/mtrr: Correct the range check before performing MTRR type lookupsYing-Tsun Huang
In mtrr_type_lookup(), if the input memory address region is not in the MTRR, over 4GB, and not over the top of memory, a write-back attribute is returned. These condition checks are for ensuring the input memory address region is actually mapped to the physical memory. However, if the end address is just aligned with the top of memory, the condition check treats the address is over the top of memory, and write-back attribute is not returned. And this hits in a real use case with NVDIMM: the nd_pmem module tries to map NVDIMMs as cacheable memories when NVDIMMs are connected. If a NVDIMM is the last of the DIMMs, the performance of this NVDIMM becomes very low since it is aligned with the top of memory and its memory type is uncached-minus. Move the input end address change to inclusive up into mtrr_type_lookup(), before checking for the top of memory in either mtrr_type_lookup_{variable,fixed}() helpers. [ bp: Massage commit message. ] Fixes: 0cc705f56e40 ("x86/mm/mtrr: Clean up mtrr_type_lookup()") Signed-off-by: Ying-Tsun Huang <ying-tsun.huang@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20201215070721.4349-1-ying-tsun.huang@amd.com
2021-01-06x86/hyperv: check cpu mask after interrupt has been disabledWei Liu
We've observed crashes due to an empty cpu mask in hyperv_flush_tlb_others. Obviously the cpu mask in question is changed between the cpumask_empty call at the beginning of the function and when it is actually used later. One theory is that an interrupt comes in between and a code path ends up changing the mask. Move the check after interrupt has been disabled to see if it fixes the issue. Signed-off-by: Wei Liu <wei.liu@kernel.org> Cc: stable@kernel.org Link: https://lore.kernel.org/r/20210105175043.28325-1-wei.liu@kernel.org Reviewed-by: Michael Kelley <mikelley@microsoft.com>
2021-01-06powerpc: Handle .text.{hot,unlikely}.* in linker scriptNathan Chancellor
Commit eff8728fe698 ("vmlinux.lds.h: Add PGO and AutoFDO input sections") added ".text.unlikely.*" and ".text.hot.*" due to an LLVM change [1]. After another LLVM change [2], these sections are seen in some PowerPC builds, where there is a orphan section warning then build failure: $ make -skj"$(nproc)" \ ARCH=powerpc CROSS_COMPILE=powerpc64le-linux-gnu- LLVM=1 O=out \ distclean powernv_defconfig zImage.epapr ld.lld: warning: kernel/built-in.a(panic.o):(.text.unlikely.) is being placed in '.text.unlikely.' ... ld.lld: warning: address (0xc000000000009314) of section .text is not a multiple of alignment (256) ... ERROR: start_text address is c000000000009400, should be c000000000008000 ERROR: try to enable LD_HEAD_STUB_CATCH config option ERROR: see comments in arch/powerpc/tools/head_check.sh ... Explicitly handle these sections like in the main linker script so there is no more build failure. [1]: https://reviews.llvm.org/D79600 [2]: https://reviews.llvm.org/D92493 Fixes: 83a092cf95f2 ("powerpc: Link warning for orphan sections") Cc: stable@vger.kernel.org Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://github.com/ClangBuiltLinux/linux/issues/1218 Link: https://lore.kernel.org/r/20210104205952.1399409-1-natechancellor@gmail.com
2021-01-05arch/arc: add copy_user_page() to <asm/page.h> to fix build error on ARCRandy Dunlap
fs/dax.c uses copy_user_page() but ARC does not provide that interface, resulting in a build error. Provide copy_user_page() in <asm/page.h>. ../fs/dax.c: In function 'copy_cow_page_dax': ../fs/dax.c:702:2: error: implicit declaration of function 'copy_user_page'; did you mean 'copy_to_user_page'? [-Werror=implicit-function-declaration] Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: linux-snps-arc@lists.infradead.org Cc: Dan Williams <dan.j.williams@intel.com> #Acked-by: Vineet Gupta <vgupta@synopsys.com> # v1 Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jan Kara <jack@suse.cz> Cc: linux-fsdevel@vger.kernel.org Cc: linux-nvdimm@lists.01.org #Reviewed-by: Ira Weiny <ira.weiny@intel.com> # v2 Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2021-01-05Merge tag 'arc-5.11-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta: "Things are quieter on upstreaming front as we are mostly focusing on ARCv3/ARC64 port. This contains just build system updates from Masahiro Yamada" * tag 'arc-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: build: use $(READELF) instead of hard-coded readelf ARC: build: remove unneeded extra-y ARC: build: move symlink creation to arch/arc/Makefile to avoid race ARC: build: add boot_targets to PHONY ARC: build: add uImage.lzma to the top-level target ARC: build: remove non-existing bootpImage from KBUILD_IMAGE
2021-01-05x86/sev-es: Fix SEV-ES OUT/IN immediate opcode vc handlingPeter Gonda
The IN and OUT instructions with port address as an immediate operand only use an 8-bit immediate (imm8). The current VC handler uses the entire 32-bit immediate value but these instructions only set the first bytes. Cast the operand to an u8 for that. [ bp: Massage commit message. ] Fixes: 25189d08e5168 ("x86/sev-es: Add support for handling IOIO exceptions") Signed-off-by: Peter Gonda <pgonda@google.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: David Rientjes <rientjes@google.com> Link: https://lkml.kernel.org/r/20210105163311.221490-1-pgonda@google.com
2021-01-05arm64: kasan: Set TCR_EL1.TBID1 when KASAN_HW_TAGS is enabledCatalin Marinas
Commit 49b3cf035edc ("kasan: arm64: set TCR_EL1.TBID1 when enabled") set the TBID1 bit for the KASAN_SW_TAGS configuration, freeing up 8 bits to be used by PAC. With in-kernel MTE now in mainline, also set this bit for the KASAN_HW_TAGS configuration. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Peter Collingbourne <pcc@google.com> Acked-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Acked-by: Andrey Konovalov <andreyknvl@google.com>
2021-01-05arm64: vdso: disable .eh_frame_hdr via /DISCARD/ instead of --no-eh-frame-hdrPeter Collingbourne
Currently with ld.lld we emit an empty .eh_frame_hdr section (and a corresponding program header) into the vDSO. With ld.bfd the section is not emitted but the program header is, with p_vaddr set to 0. This can lead to unwinders attempting to interpret the data at whichever location the program header happens to point to as an unwind info header. This happens to be mostly harmless as long as the byte at that location (interpreted as a version number) has a value other than 1, causing both libgcc and LLVM libunwind to ignore the section (in libunwind's case, after printing an error message to stderr), but it could lead to worse problems if the byte happened to be 1 or the program header points to non-readable memory (e.g. if the empty section was placed at a page boundary). Instead of disabling .eh_frame_hdr via --no-eh-frame-hdr (which also has the downside of being unsupported by older versions of GNU binutils), disable it by discarding the section, and stop emitting the program header that points to it. I understand that we intend to emit valid unwind info for the vDSO at some point. Once that happens this patch can be reverted. Signed-off-by: Peter Collingbourne <pcc@google.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Link: https://linux-review.googlesource.com/id/If745fd9cadcb31b4010acbf5693727fe111b0863 Link: https://lore.kernel.org/r/20201230221954.2007257-1-pcc@google.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-01-05arm64: traps: remove duplicate include statementTian Tao
asm/exception.h is included more than once. Remove the one that isn't necessary. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Link: https://lore.kernel.org/r/1609139108-10819-1-git-send-email-tiantao6@hisilicon.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-01-05x86/hyperv: Fix kexec panic/hang issuesDexuan Cui
Currently the kexec kernel can panic or hang due to 2 causes: 1) hv_cpu_die() is not called upon kexec, so the hypervisor corrupts the old VP Assist Pages when the kexec kernel runs. The same issue is fixed for hibernation in commit 421f090c819d ("x86/hyperv: Suspend/resume the VP assist page for hibernation"). Now fix it for kexec. 2) hyperv_cleanup() is called too early. In the kexec path, the other CPUs are stopped in hv_machine_shutdown() -> native_machine_shutdown(), so between hv_kexec_handler() and native_machine_shutdown(), the other CPUs can still try to access the hypercall page and cause panic. The workaround "hv_hypercall_pg = NULL;" in hyperv_cleanup() is unreliabe. Move hyperv_cleanup() to a better place. Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20201222065541.24312-1-decui@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-01-05arm64: cpufeature: remove non-exist CONFIG_KVM_ARM_HOSTShannon Zhao
Commit d82755b2e781 ("KVM: arm64: Kill off CONFIG_KVM_ARM_HOST") deletes CONFIG_KVM_ARM_HOST option, it should use CONFIG_KVM instead. Just remove CONFIG_KVM_ARM_HOST here. Fixes: d82755b2e781 ("KVM: arm64: Kill off CONFIG_KVM_ARM_HOST") Signed-off-by: Shannon Zhao <shannon.zhao@linux.alibaba.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1609760324-92271-1-git-send-email-shannon.zhao@linux.alibaba.com
2021-01-05arm64: link with -z norelro for LLD or aarch64-elfNick Desaulniers
With GNU binutils 2.35+, linking with BFD produces warnings for vmlinux: aarch64-linux-gnu-ld: warning: -z norelro ignored BFD can produce this warning when the target emulation mode does not support RELRO program headers, and -z relro or -z norelro is passed. Alan Modra clarifies: The default linker emulation for an aarch64-linux ld.bfd is -maarch64linux, the default for an aarch64-elf linker is -maarch64elf. They are not equivalent. If you choose -maarch64elf you get an emulation that doesn't support -z relro. The ARCH=arm64 kernel prefers -maarch64elf, but may fall back to -maarch64linux based on the toolchain configuration. LLD will always create RELRO program header regardless of target emulation. To avoid the above warning when linking with BFD, pass -z norelro only when linking with LLD or with -maarch64linux. Fixes: 3b92fa7485eb ("arm64: link with -z norelro regardless of CONFIG_RELOCATABLE") Fixes: 3bbd3db86470 ("arm64: relocatable: fix inconsistencies in linker script and options") Cc: <stable@vger.kernel.org> # 5.0.x- Reported-by: kernelci.org bot <bot@kernelci.org> Reported-by: Quentin Perret <qperret@google.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Cc: Alan Modra <amodra@gmail.com> Cc: Fāng-ruì Sòng <maskray@google.com> Link: https://lore.kernel.org/r/20201218002432.788499-1-ndesaulniers@google.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-01-05x86/mm: Fix leak of pmd ptlockDan Williams
Commit 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces") introduced a new location where a pmd was released, but neglected to run the pmd page destructor. In fact, this happened previously for a different pmd release path and was fixed by commit: c283610e44ec ("x86, mm: do not leak page->ptl for pmd page tables"). This issue was hidden until recently because the failure mode is silent, but commit: b2b29d6d0119 ("mm: account PMD tables like PTE tables") turns the failure mode into this signature: BUG: Bad page state in process lt-pmem-ns pfn:15943d page:000000007262ed7b refcount:0 mapcount:-1024 mapping:0000000000000000 index:0x0 pfn:0x15943d flags: 0xaffff800000000() raw: 00affff800000000 dead000000000100 0000000000000000 0000000000000000 raw: 0000000000000000 ffff913a029bcc08 00000000fffffbff 0000000000000000 page dumped because: nonzero mapcount [..] dump_stack+0x8b/0xb0 bad_page.cold+0x63/0x94 free_pcp_prepare+0x224/0x270 free_unref_page+0x18/0xd0 pud_free_pmd_page+0x146/0x160 ioremap_pud_range+0xe3/0x350 ioremap_page_range+0x108/0x160 __ioremap_caller.constprop.0+0x174/0x2b0 ? memremap+0x7a/0x110 memremap+0x7a/0x110 devm_memremap+0x53/0xa0 pmem_attach_disk+0x4ed/0x530 [nd_pmem] ? __devm_release_region+0x52/0x80 nvdimm_bus_probe+0x85/0x210 [libnvdimm] Given this is a repeat occurrence it seemed prudent to look for other places where this destructor might be missing and whether a better helper is needed. try_to_free_pmd_page() looks like a candidate, but testing with setting up and tearing down pmd mappings via the dax unit tests is thus far not triggering the failure. As for a better helper pmd_free() is close, but it is a messy fit due to requiring an @mm arg. Also, ___pmd_free_tlb() wants to call paravirt_tlb_remove_table() instead of free_page(), so open-coded pgtable_pmd_page_dtor() seems the best way forward for now. Debugged together with Matthew Wilcox <willy@infradead.org>. Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Yi Zhang <yi.zhang@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/160697689204.605323.17629854984697045602.stgit@dwillia2-desk3.amr.corp.intel.com
2021-01-05ARM: dts: imx6qdl-kontron-samx6i: fix pwms for lcd-backlightMarco Felsch
The pwms property have to specify the no-/inverted flag since commit fa28d8212ede ("ARM: dts: imx: default to #pwm-cells = <3> in the SoC dtsi files"). Fixes: fa28d8212ede ("ARM: dts: imx: default to #pwm-cells = <3> in the SoC dtsi files") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-04KVM: arm64: Replace KVM_ARM_PMU with HW_PERF_EVENTSMarc Zyngier
KVM_ARM_PMU only existed for the benefit of 32bit ARM hosts, and makes no sense now that we are 64bit only. Get rid of it. Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-01-04arm64: dts: amlogic: meson-g12: Set FL-adj property valueSerge Semin
In accordance with the DWC USB3 bindings the property is supposed to have uint32 type. It's erroneous from the DT schema and driver points of view to declare it as boolean. As Neil suggested set it to 0x20 so not break the platform and to make the dtbs checker happy. Link: https://lore.kernel.org/linux-usb/20201010224121.12672-16-Sergey.Semin@baikalelectronics.ru/ Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Fixes: 9baf7d6be730 ("arm64: dts: meson: g12a: Add G12A USB nodes") Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20201210091756.18057-3-Sergey.Semin@baikalelectronics.ru
2021-01-04powerpc/32s: Fix RTAS machine check with VMAP stackChristophe Leroy
When we have VMAP stack, exception prolog 1 sets r1, not r11. When it is not an RTAS machine check, don't trash r1 because it is needed by prolog 1. Fixes: da7bb43ab9da ("powerpc/32: Fix vmap stack - Properly set r1 before activating MMU") Fixes: d2e006036082 ("powerpc/32: Use SPRN_SPRG_SCRATCH2 in exception prologs") Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Squash in fixup for RTAS machine check from Christophe] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/bc77d61d1c18940e456a2dee464f1e2eda65a3f0.1608621048.git.christophe.leroy@csgroup.eu
2021-01-04arm64: mm: Fix ARCH_LOW_ADDRESS_LIMIT when !CONFIG_ZONE_DMANicolas Saenz Julienne
Systems configured with CONFIG_ZONE_DMA32, CONFIG_ZONE_NORMAL and !CONFIG_ZONE_DMA will fail to properly setup ARCH_LOW_ADDRESS_LIMIT. The limit will default to ~0ULL, effectively spanning the whole memory, which is too high for a configuration that expects low memory to be capped at 4GB. Fix ARCH_LOW_ADDRESS_LIMIT by falling back to arm64_dma32_phys_limit when arm64_dma_phys_limit isn't set. arm64_dma32_phys_limit will honour CONFIG_ZONE_DMA32, or span the entire memory when not enabled. Fixes: 1a8e1cef7603 ("arm64: use both ZONE_DMA and ZONE_DMA32") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20201218163307.10150-1-nsaenzjulienne@suse.de Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-01-04arm64: mte: remove an ISB on kernel exitPeter Collingbourne
This ISB is unnecessary because we will soon do an ERET. Signed-off-by: Peter Collingbourne <pcc@google.com> Link: https://linux-review.googlesource.com/id/I69f1ee6bb09b1372dd744a0e01cedaf090c8d448 Link: https://lore.kernel.org/r/20201203073458.2675400-1-pcc@google.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-01-04arm64/smp: Remove unused irq variable in arch_show_interrupts()Geert Uytterhoeven
arch/arm64/kernel/smp.c: In function ‘arch_show_interrupts’: arch/arm64/kernel/smp.c:808:16: warning: unused variable ‘irq’ [-Wunused-variable] 808 | unsigned int irq = irq_desc_get_irq(ipi_desc[i]); | ^~~ The removal of the last user forgot to remove the variable. Fixes: 5089bc51f81f ("arm64/smp: Use irq_desc_kstat_cpu() in arch_show_interrupts()") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201215103026.2872532-1-geert+renesas@glider.be Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-01-03arm64: dts: qcom: c630: keep both touchpad devices enabledShawn Guo
Indicated by AML code in ACPI table, the touchpad in-use could be found on two possible slave addresses on &i2c3, i.e. hid@15 and hid@2c. And which one is in-use can be determined by reading another address on the I2C bus. Unfortunately, for DT boot, there is currently no support in firmware to make this check and patch DT accordingly. This results in a non-functional touchpad on those C630 devices with hid@2c. As i2c-hid driver will stop probing the device if there is nothing on the slave address, we can actually keep both devices enabled in DT, and i2c-hid driver will only probe the existing one. The only problem is that we cannot set up pinctrl in both device nodes, as two devices with the same pinctrl will cause pin conflict that makes the second device fail to probe. Let's move the pinctrl state up to parent node to solve this problem. As the pinctrl state of parent node is already defined in sdm845.dtsi, it ends up with overwriting pinctrl-0 with i2c3_hid_active state added in there. Fixes: 11d0e4f28156 ("arm64: dts: qcom: c630: Polish i2c-hid devices") Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20210102045940.26874-1-shawn.guo@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-03crypto: arm/chacha-neon - add missing counter incrementArd Biesheuvel
Commit 86cd97ec4b943af3 ("crypto: arm/chacha-neon - optimize for non-block size multiples") refactored the chacha block handling in the glue code in a way that may result in the counter increment to be omitted when calling chacha_block_xor_neon() to process a full block. This violates the skcipher API, which requires that the output IV is suitable for handling more input as long as the preceding input has been presented in round multiples of the block size. Also, the same code is exposed via the chacha library interface whose callers may actually rely on this increment to occur even for final blocks that are smaller than the chacha block size. So increment the counter after calling chacha_block_xor_neon(). Fixes: 86cd97ec4b943af3 ("crypto: arm/chacha-neon - optimize for non-block size multiples") Reported-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-02Merge tag 's390-5.11-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 cleanups from Vasily Gorbik: "Update defconfigs and sort config select list" * tag 's390-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/Kconfig: sort config S390 select list once again s390: update defconfigs
2020-12-31KVM: arm64: Remove spurious semicolon in reg_to_encoding()Marc Zyngier
Although not a problem right now, it flared up while working on some other aspects of the code-base. Remove the useless semicolon. Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-12-30arm64: defconfig: Make INTERCONNECT_QCOM_SDM845 builtinBjorn Andersson
As of v5.11-rc1 the QUP nodes of SDM845 has got their interconnect properties specified, this means that the relevant interconnect provider needs to be builtin for the UART device to probe and the console to be registered before userspace needs to access it. Reviewed-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201222043745.3420447-1-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-12-30s390/Kconfig: sort config S390 select list once againHeiko Carstens
...and add comments at the top and bottom. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-12-30s390: update defconfigsHeiko Carstens
Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-12-30KVM: arm64: Fix hyp_cpu_pm_{init,exit} __init annotationMarc Zyngier
The __init annotations on hyp_cpu_pm_{init,exit} are obviously incorrect, and the build system shouts at you if you enable DEBUG_SECTION_MISMATCH. Nothing really bad happens as we never execute that code outside of the init context, but we can't label the callers as __int either, as kvm_init isn't __init itself. Oh well. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Link: https://lore.kernel.org/r/20201223120854.255347-1-maz@kernel.org
2020-12-30ARM: dts; gta04: SPI panel chip select is active lowH. Nikolaus Schaller
With the arrival of commit 2fee9583198eb9 ("spi: dt-bindings: clarify CS behavior for spi-cs-high and gpio descriptors") it was clarified what the proper state for cs-gpios should be, even if the flag is ignored. The driver code is doing the right thing since 766c6b63aa04 ("spi: fix client driver breakages when using GPIO descriptors") The chip-select of the td028ttec1 panel is active-low, so we must omit spi-cs-high; attribute (already removed by separate patch) and should now use GPIO_ACTIVE_LOW for the client device description to be fully consistent. Fixes: 766c6b63aa04 ("spi: fix client driver breakages when using GPIO descriptors") CC: stable@vger.kernel.org Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-12-29local64.h: make <asm/local64.h> mandatoryRandy Dunlap
Make <asm-generic/local64.h> mandatory in include/asm-generic/Kbuild and remove all arch/*/include/asm/local64.h arch-specific files since they only #include <asm-generic/local64.h>. This fixes build errors on arch/c6x/ and arch/nios2/ for block/blk-iocost.c. Build-tested on 21 of 25 arch-es. (tools problems on the others) Yes, we could even rename <asm-generic/local64.h> to <linux/local64.h> and change all #includes to use <linux/local64.h> instead. Link: https://lkml.kernel.org/r/20201227024446.17018-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Suggested-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29mm: memmap defer init doesn't work as expectedBaoquan He
VMware observed a performance regression during memmap init on their platform, and bisected to commit 73a6e474cb376 ("mm: memmap_init: iterate over memblock regions rather that check each PFN") causing it. Before the commit: [0.033176] Normal zone: 1445888 pages used for memmap [0.033176] Normal zone: 89391104 pages, LIFO batch:63 [0.035851] ACPI: PM-Timer IO Port: 0x448 With commit [0.026874] Normal zone: 1445888 pages used for memmap [0.026875] Normal zone: 89391104 pages, LIFO batch:63 [2.028450] ACPI: PM-Timer IO Port: 0x448 The root cause is the current memmap defer init doesn't work as expected. Before, memmap_init_zone() was used to do memmap init of one whole zone, to initialize all low zones of one numa node, but defer memmap init of the last zone in that numa node. However, since commit 73a6e474cb376, function memmap_init() is adapted to iterater over memblock regions inside one zone, then call memmap_init_zone() to do memmap init for each region. E.g, on VMware's system, the memory layout is as below, there are two memory regions in node 2. The current code will mistakenly initialize the whole 1st region [mem 0xab00000000-0xfcffffffff], then do memmap defer to iniatialize only one memmory section on the 2nd region [mem 0x10000000000-0x1033fffffff]. In fact, we only expect to see that there's only one memory section's memmap initialized. That's why more time is costed at the time. [ 0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] [ 0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff] [ 0.008843] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x55ffffffff] [ 0.008844] ACPI: SRAT: Node 1 PXM 1 [mem 0x5600000000-0xaaffffffff] [ 0.008844] ACPI: SRAT: Node 2 PXM 2 [mem 0xab00000000-0xfcffffffff] [ 0.008845] ACPI: SRAT: Node 2 PXM 2 [mem 0x10000000000-0x1033fffffff] Now, let's add a parameter 'zone_end_pfn' to memmap_init_zone() to pass down the real zone end pfn so that defer_init() can use it to judge whether defer need be taken in zone wide. Link: https://lkml.kernel.org/r/20201223080811.16211-1-bhe@redhat.com Link: https://lkml.kernel.org/r/20201223080811.16211-2-bhe@redhat.com Fixes: commit 73a6e474cb376 ("mm: memmap_init: iterate over memblock regions rather that check each PFN") Signed-off-by: Baoquan He <bhe@redhat.com> Reported-by: Rahul Gopakumar <gopakumarr@vmware.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: David Hildenbrand <david@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-28MIPS: Fix malformed NT_FILE and NT_SIGINFO in 32bit coredumpsAl Viro
Patches that introduced NT_FILE and NT_SIGINFO notes back in 2012 had taken care of native (fs/binfmt_elf.c) and compat (fs/compat_binfmt_elf.c) coredumps; unfortunately, compat on mips (which does not go through the usual compat_binfmt_elf.c) had not been noticed. As the result, both N32 and O32 coredumps on 64bit mips kernels have those sections malformed enough to confuse the living hell out of all gdb and readelf versions (up to and including the tip of binutils-gdb.git). Longer term solution is to make both O32 and N32 compat use the regular compat_binfmt_elf.c, but that's too much for backports. The minimal solution is to do in arch/mips/kernel/binfmt_elf[on]32.c the same thing those patches have done in fs/compat_binfmt_elf.c Cc: stable@kernel.org # v3.7+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-12-28MIPS: boot: Fix unaligned access with CONFIG_MIPS_RAW_APPENDED_DTBPaul Cercueil
The compressed payload is not necesarily 4-byte aligned, at least when compiling with Clang. In that case, the 4-byte value appended to the compressed payload that corresponds to the uncompressed kernel image size must be read using get_unaligned_le32(). This fixes Clang-built kernels not booting on MIPS (tested on a Ingenic JZ4770 board). Fixes: b8f54f2cde78 ("MIPS: ZBOOT: copy appended dtb to the end of the kernel") Cc: <stable@vger.kernel.org> # v4.7 Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-12-28fanotify: Fix sys_fanotify_mark() on native x86-32Brian Gerst
Commit 121b32a58a3a ("x86/entry/32: Use IA32-specific wrappers for syscalls taking 64-bit arguments") converted native x86-32 which take 64-bit arguments to use the compat handlers to allow conversion to passing args via pt_regs. sys_fanotify_mark() was however missed, as it has a general compat handler. Add a config option that will use the syscall wrapper that takes the split args for native 32-bit. [ bp: Fix typo in Kconfig help text. ] Fixes: 121b32a58a3a ("x86/entry/32: Use IA32-specific wrappers for syscalls taking 64-bit arguments") Reported-by: Paweł Jasiak <pawel@jasiak.xyz> Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lkml.kernel.org/r/20201130223059.101286-1-brgerst@gmail.com
2020-12-27KVM: arm64: Consolidate dist->ready setting into kvm_vgic_map_resources()Marc Zyngier
dist->ready setting is pointlessly spread across the two vgic backends, while it could be consolidated in kvm_vgic_map_resources(). Move it there, and slightly simplify the flows in both backends. Suggested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-12-27KVM: arm64: Remove redundant call to kvm_pmu_vcpu_reset()Alexandru Elisei
KVM_ARM_VCPU_INIT ioctl calls kvm_reset_vcpu(), which in turn resets the PMU with a call to kvm_pmu_vcpu_reset(). The function zeroes the PMU chained counters bitmap and stops all the counters with a perf event attached. Because it is called before the VCPU has had the chance to run, no perf events are in use and none are released. kvm_arm_pmu_v3_enable(), called by kvm_vcpu_first_run_init() only if the VCPU has been initialized, also resets the PMU. kvm_pmu_vcpu_reset() in this case does the exact same thing as the previous call, so remove it. Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201201150157.223625-6-alexandru.elisei@arm.com
2020-12-27KVM: arm64: Update comment in kvm_vgic_map_resources()Alexandru Elisei
vgic_v3_map_resources() returns -EBUSY if the VGIC isn't initialized, update the comment to kvm_vgic_map_resources() to match what the function does. Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201201150157.223625-5-alexandru.elisei@arm.com
2020-12-24Merge tag 'riscv-for-linus-5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fix from Palmer Dabbelt "Avoid trying to initialize memory regions outside the usable range" * tag 'riscv-for-linus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: Fix usage of memblock_enforce_memory_limit
2020-12-24Merge tag 'powerpc-5.11-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Four commits fixing various things in the new C VDSO code - One fix for a 32-bit VMAP stack bug - Two minor build fixes Thanks to Cédric Le Goater, Christophe Leroy, and Will Springer. * tag 'powerpc-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/32: Fix vmap stack - Properly set r1 before activating MMU on syscall too powerpc/vdso: Fix DOTSYM for 32-bit LE VDSO powerpc/vdso: Don't pass 64-bit ABI cflags to 32-bit VDSO powerpc/vdso: Block R_PPC_REL24 relocations powerpc/smp: Add __init to init_big_cores() powerpc/time: Force inlining of get_tb() powerpc/boot: Fix build of dts/fsl
2020-12-24Merge tag 'irq-core-2020-12-23' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "This is the second attempt after the first one failed miserably and got zapped to unblock the rest of the interrupt related patches. A treewide cleanup of interrupt descriptor (ab)use with all sorts of racy accesses, inefficient and disfunctional code. The goal is to remove the export of irq_to_desc() to prevent these things from creeping up again" * tag 'irq-core-2020-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits) genirq: Restrict export of irq_to_desc() xen/events: Implement irq distribution xen/events: Reduce irq_info:: Spurious_cnt storage size xen/events: Only force affinity mask for percpu interrupts xen/events: Use immediate affinity setting xen/events: Remove disfunct affinity spreading xen/events: Remove unused bind_evtchn_to_irq_lateeoi() net/mlx5: Use effective interrupt affinity net/mlx5: Replace irq_to_desc() abuse net/mlx4: Use effective interrupt affinity net/mlx4: Replace irq_to_desc() abuse PCI: mobiveil: Use irq_data_get_irq_chip_data() PCI: xilinx-nwl: Use irq_data_get_irq_chip_data() NTB/msi: Use irq_has_action() mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc pinctrl: nomadik: Use irq_has_action() drm/i915/pmu: Replace open coded kstat_irqs() copy drm/i915/lpe_audio: Remove pointless irq_to_desc() usage s390/irq: Use irq_desc_kstat_cpu() in show_msi_interrupt() parisc/irq: Use irq_desc_kstat_cpu() in show_interrupts() ...
generated by cgit (git 2.34.1) at 2025-09-19 04:23:20 +0000